Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 637 views

    High Density Polyethylene: Cynpol Hd5502

    Uploaded by

    Melissa Valero
    Cynpol HD5502 is a high density polyethylene grade designed for blow molding applications requiring excellent environmental stress crack resistance. It has a melt index of 0.3 and density of 0.954. The product meets FDA requirements and has properties including tensile strength of 28 MPa, elongation over 600%, flexural modulus of 1320 MPa, and ESCR of 30 hours.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    High Density Polyethylene: Cynpol Hd5502

    Uploaded by

    Melissa Valero
    637 views1 page
    Cynpol HD5502 is a high density polyethylene grade designed for blow molding applications requiring excellent environmental stress crack resistance. It has a melt index of 0.3 and density of 0.954. The product meets FDA requirements and has properties including tensile strength of 28 MPa, elongation over 600%, flexural modulus of 1320 MPa, and ESCR of 30 hours.

    Original Description:

    tds

    Original Title

    CYNPOL HD5502

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Cynpol HD5502 is a high density polyethylene grade designed for blow molding applications requiring excellent environmental stress crack resistance. It has a melt index of 0.3 and density of 0.954. The product meets FDA requirements and has properties including tensile strength of 28 MPa, elongation over 600%, flexural modulus of 1320 MPa, and ESCR of 30 hours.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    637 views1 page

    High Density Polyethylene: Cynpol Hd5502

    Uploaded by

    Melissa Valero
    Cynpol HD5502 is a high density polyethylene grade designed for blow molding applications requiring excellent environmental stress crack resistance. It has a melt index of 0.3 and density of 0.954. The product meets FDA requirements and has properties including tensile strength of 28 MPa, elongation over 600%, flexural modulus of 1320 MPa, and ESCR of 30 hours.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    CYNPOL HD5502

    High Density Polyethylene


    MELT INDEX: 0.30 DENSITY: 0.954

    Cynpol HD5502 is a high density polyethylene grade. This product is designed for blow
    molding and is recommended for use in applications requiring excellent environmental
    stress crack resistance. Meets the requirements of FDA regulation 177.1520.
    .
    .
    .
    TYPICAL PROPERTIES
    PROPERTY TEST METHOD UNITS RESULT

    Melt Index, ASTM D-1238 g/10 min 0.3


    2.16 kg at 190 C

    Density ASTM D-792 g/cc 0.954

    Tensile Strength, Yield ASTM D-638 MPa 28

    Elongation, Break ASTM D-638 % >600

    Flexural Modules ASTM D-790 MPa 1320


    2% Secant

    ESCR ASTM D-1693 hr 30

    Tensile Impact ASTM D-1822 ft-lb/in2 90

    The technical information is based on injection molded specimens and data information
    herein refers to typical values. Since conditions of product use is outside our control, we
    make no warranties and assume no liability in connection with any use of this
    information.

    Vinmar International Ltd. 16800 Imperial Valley Dr., Suite 499 Houston, TX 77060
    Phone: 281-618-1300 Fax: 281 618-1399 Http://www.vinmar.com

    Rev. 09/01/2015

    You might also like