Content: Document Name: Huawei Y560-Lxx Instruction For Sdcard Upgrade Document Classified: Internal Public
Content: Document Name: Huawei Y560-Lxx Instruction For Sdcard Upgrade Document Classified: Internal Public
Content: Document Name: Huawei Y560-Lxx Instruction For Sdcard Upgrade Document Classified: Internal Public
File type File name HUAWEI Y560-LXX Instruction for SDcard upgrade
Version V1.0
File
Common encoding
technical
Prepared by
document
Reviewer
Approver
Content
1 Definition .............................................................. 2
2 Purpose ................................................................. 2
3 Scope.................................................................... 2
4 Operation ............................................................... 2
1 Definition
2 Purpose
3 Scope
4 Operation
4.1 Preparation
Ensure MICRO SD card is read-write and its remaining space is greater than the
package. It is recommended to use SDcard such as Sandisk, Kingstone and Kingmax.
Then check whether the update.App file requested for upgrade is in dload
directory of SD card.
4.2 Attention
1. Upgrade operations will erase user data, so important data and applications
should completes the backup before upgrade.
2. In the process of upgrading, ensure the battery level is greater than 20%.
It is recommended to connect to the USB wire in the process of upgrade to make sure
that power supply is sufficient during the upgrade process.
Compulsory upgrade and normal upgrade are the two ways for SDcard upgrade. The
first method is suitable for the phones which can't boot up or in need of repair.
The other is applicable for users to upgrade version or other situations.
Step 1: Prepare a SD card which capacity is more than 1G. And it is recommended
to use SDcard such as Sandisk, Kingstone or Kingmax.
Step 2: It’s optional to format SD card first.
Step 3: If there isn’t dload folder in SDcard directory, create dload folder.
And then copy update.App file to dload folder. The result is as follows:
Step 4: Insert SDcard and reboot. Then go to Settings -- All -- System updates
-- Menu -- Local update -- Full package: UPDATE.APP -- Install. Here users need to
choose whether to back up data according to the dialogue, and finally select Install
button to upgrade until a robot comes up to indicate complete update. The whole
process is shown below.
Step 1: Prepare a SD card which capacity is more than 1G. And it is recommended
to use SDcard such as Sandisk, Kingstone or Kingmax.
Step 2: It’s optional to format SD card first.
Step 3: If there isn’t dload folder in SDcard directory, create dload folder.
And then copy update.App file to dload folder. The result is as follows:
Step 4: Hold the volume up and down keys meanwhile more than 10 seconds first,
and then press the power button. This will automatically trigger the SD card upgrade
operation, thus go into the SD card upgrade interface. When a robot comes up, that
represents complete upgrade. The whole process is shown below.
4.5 Verification
5 Chart track
6 References
7 Additional remarks