8514 N95 Welding Respirator 04/01/14

Safety Data Sheet

Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

This Safety Data Sheet (SDS) is provided as a courtesy in response to a customer request. This product is not regulated
under, and a SDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
because, when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However,
use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may
affect the performance of the product and may present potential health and safety hazards.

Document Group: 21-0487-5 Version Number: 3.01

Issue Date: 04/01/14 Supercedes Date: 01/11/13

SECTION 1: Identification
1.1. Product identifier
8514 N95 Welding Respirator

Product Identification Numbers

70-0708-4388-6, 70-0708-4508-9, 70-0716-6883-7

1.2. Recommended use and restrictions on use

Recommended use
Respiratory Protection

1.3. Supplier’s details

MANUFACTURER: 3M
DIVISION: Personal Safety Division

ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA

Telephone: 1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number

1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification

2.1. Hazard classification
This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

2.2. Label elements

Signal word
Not applicable.

Symbols
Not applicable.

__________________________________________________________________________________________
Page 1 of 8
 8514 N95 Welding Respirator 04/01/14

Pictograms
Not applicable.

2.3. Hazards not otherwise classified

None.

170% of the mixture consists of ingredients of unknown acute oral toxicity.

SECTION 3: Composition/information on ingredients

Ingredient C.A.S. No. % by Wt
Polypropylene Unknown 30 - 60
Polyester Unknown 15 - 45
Cotton Unknown 7 - 13
Polyisoprene Unknown 7 - 13
Carbon Unknown 7 - 13
Flame Retardant Unknown 3- 7
Aluminum Unknown 3- 7
Acrylic emulsion Unknown 3- 7
Polyvinyl Chloride Foam Unknown 1- 5

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation:
No need for first aid is anticipated.

Skin Contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.

Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

If Swallowed:
No need for first aid is anticipated.

4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.

4.3. Indication of any immediate medical attention and special treatment required
Not applicable

SECTION 5: Fire-fighting measures

5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

None inherent in this product.

5.3. Special protective actions for fire-fighters

__________________________________________________________________________________________
Page 2 of 8
 8514 N95 Welding Respirator 04/01/14

No unusual fire or explosion hazards are anticipated.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Not applicable. Ventilate the area with fresh air.

6.2. Environmental precautions

Not applicable. Avoid release to the environment.

6.3. Methods and material for containment and cleaning up

Not applicable. Sweep up. Seal the container.

SECTION 7: Handling and storage

7.1. Precautions for safe handling
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical
under normal use conditions.

7.2. Conditions for safe storage including any incompatibilities

Not applicable.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Occupational exposure limits

No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS.

8.2. Exposure controls

8.2.1. Engineering controls

No engineering controls required.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Eye protection not required.

Skin/hand protection
No chemical protective gloves are required.

Respiratory protection

Respiratory protection is not required.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
General Physical Form: Solid
Specific Physical Form: Non-Woven Material

__________________________________________________________________________________________
Page 3 of 8
 8514 N95 Welding Respirator 04/01/14

Odor, Color, Grade: White, non-woven respirator shell with aluminum noseclip and
headbands. No odor.
Odor threshold Not Applicable
pH Not Applicable
Melting point No Data Available
Boiling Point Not Applicable
Flash Point Not Applicable
Evaporation rate Not Applicable
Flammability (solid, gas) Not Classified
Flammable Limits(LEL) Not Applicable
Flammable Limits(UEL) Not Applicable
Vapor Pressure Not Applicable

Vapor Density Not Applicable

Density Not Applicable

Specific Gravity Not Applicable
Solubility In Water Not Applicable

Solubility- non-water Not Applicable

Partition coefficient: n-octanol/ water No Data Available

Autoignition temperature Not Applicable
Decomposition temperature Not Applicable
Viscosity Not Applicable
Volatile Organic Compounds Not Applicable
Percent volatile Not Applicable
VOC Less H2O & Exempt Solvents Not Applicable

SECTION 10: Stability and reactivity

10.1. Reactivity
This material is considered to be non reactive under normal use conditions.

10.2. Chemical stability

Stable.

10.3. Possibility of hazardous reactions

Hazardous polymerization will not occur.

10.4. Conditions to avoid

None known.

10.5. Incompatible materials

None known.

10.6. Hazardous decomposition products

Substance Condition
Carbon monoxide Not Specified
Carbon dioxide Not Specified

Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition

__________________________________________________________________________________________
Page 4 of 8
 8514 N95 Welding Respirator 04/01/14

products may occur as a result of oxidation, heating, or reaction with another material.

SECTION 11: Toxicological information

The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.

11.1. Information on Toxicological effects

Signs and Symptoms of Exposure

Based on test data and/or information on the components, this material may produce the following health effects:

Inhalation:
No health effects are expected.

Skin Contact:
No health effects are expected. Contact with the skin during product use is not expected to result in significant irritation.

Eye Contact:
No health effects are expected. Contact with the eyes during product use is not expected to result in significant irritation.

Ingestion:
No health effects are expected.

Additional Information:
This product, when used under reasonable conditions and in accordance with the 3M directions for use, should not present a
health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use
may affect the performance of the product and may present potential health and safety hazards.

Toxicological Data
If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.

Acute Toxicity
Name Route Species Value
Overall product Ingestion No data available; calculated ATE > 5,000 mg/kg
ATE = acute toxicity estimate

Skin Corrosion/Irritation
Name Species Value

Serious Eye Damage/Irritation

Name Species Value

Skin Sensitization
Name Species Value

Respiratory Sensitization
Name Species Value

__________________________________________________________________________________________
Page 5 of 8
 8514 N95 Welding Respirator 04/01/14

Germ Cell Mutagenicity

Name Route Value

Carcinogenicity
Name Route Species Value

Reproductive Toxicity

Reproductive and/or Developmental Effects

Name Route Value Species Test Result Exposure
Duration

Target Organ(s)

Specific Target Organ Toxicity - single exposure

Name Route Target Organ(s) Value Species Test Result Exposure
Duration

Specific Target Organ Toxicity - repeated exposure

Name Route Target Organ(s) Value Species Test Result Exposure
Duration

Aspiration Hazard
Name Value

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

SECTION 12: Ecological information

Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.
Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.

SECTION 13: Disposal considerations

13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.

Prior to disposal, consult all applicable authorities and regulations to insure proper classification. Dispose of waste product in
a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper
destruction may require the use of additional fuel during incineration processes. If no other disposal options are available,
waste product may be placed in a landfill properly designed for industrial waste.

__________________________________________________________________________________________
Page 6 of 8
 8514 N95 Welding Respirator 04/01/14

EPA Hazardous Waste Number (RCRA): Not regulated

SECTION 14: Transport Information

For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.

SECTION 15: Regulatory information

15.1. US Federal Regulations

Contact 3M for more information.

311/312 Hazard Categories:

Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No

15.2. State Regulations

Contact 3M for more information.

15.3. Chemical Inventories

This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements.

Contact 3M for more information.

15.4. International Regulations

Contact 3M for more information.

This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: Other information

NFPA Hazard Classification
Health: 0 Flammability: 1 Instability: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.

Document Group: 21-0487-5 Version Number: 3.01

Issue Date: 04/01/14 Supercedes Date: 01/11/13

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR
USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable
for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product,
some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer

__________________________________________________________________________________________
Page 7 of 8
 8514 N95 Welding Respirator 04/01/14

may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available
directly from 3M

3M USA SDSs are available at www.3M.com

__________________________________________________________________________________________
Page 8 of 8