Installation Guide Englishp d711md
Installation Guide Englishp d711md
Installation Guide Englishp d711md
2017-11
Printer Driver
Installation Guide
This guide describes installation of the Printer Driver for Windows 10, Windows 8,
Windows 7, Windows Vista, and Windows XP.
Before using the printer driver, be sure to read the “Readme” file.
UP-D711MD
2
(suspended), or hibernation mode. Otherwise correct
Operation Environment operation is not assured.
Requirements
To use the printer driver, your computer must be running
one of the following operating systems.
• Computer that can run on Microsoft Windows 10
• Computer that can run on Microsoft Windows 8
• Computer that can run on Microsoft Windows 7
• Computer that can run on Microsoft Windows Vista
• Computer that can run on Microsoft Windows XP
Professional/Home Edition
For information on the operating systems compatible
with your printer, refer to Compatible OS chart on the
Sony website.
http://www.sony.net/Products/DP-driver/os/
win_mp.html
Note
When the printer is connected and turned on, ensure that
the computer does not go into sleep, standby
The following dialog box appears. Installation starts. The status of installation appears
in the dialog box while installation is in progress.
4 Click [Next].
If the following dialog box appears while
installation is in progress, click [Install].
The end user license agreement appears.
7 Click [Finish].
7 If you did not install the printer driver, perform the The following dialog box appears.
steps in “Installation in Windows 10” to install the
printer driver.
1 Turn off the printer and disconnect the cable 6 Click [Yes].
connecting it to the computer.
The computer restarts.
2 Turn on the computer, and log on as the system
administrator or a member of the Administrators This completes uninstallation of the printer driver.
group.
Before Installation
Note
Do not connect the printer to your computer before
installing the printer driver. If the printer is connected
beforehand, it may not be recognized by the computer.
Installation in Windows 8
1 Turn on the computer, and log on as the system
administrator or a member of the Administrators
group.
7 Click [Finish].
3 Right-click the printer icon under [Unspecified], 7 If you did not install the printer driver, perform the
and then select [Remove device]. steps in “Installation in Windows 8” to install the
printer driver.
Before Installation
Note
Do not connect the printer to your computer before
installing the printer driver. If the printer is connected
5 Click [Yes].
beforehand, it may not be recognized by the computer.
Uninstallation starts.
About version upgrades
When uninstallation finishes, the following dialog
box appears. If you are upgrading a printer driver, remove the
previous printer driver before beginning the installation.
For details on the procedure to remove the printer driver,
refer to the section “Uninstalling the Printer Driver in
Windows 7” in this guide.
The following dialog box appears. Installation starts. The status of installation appears
in the dialog box while installation is in progress.
4 Click [Next].
If the following dialog box appears while
installation is in progress, click [Install this driver
The end user license agreement appears.
software anyway].
7 Click [Finish].
5 Click [Yes].
Uninstallation starts.
When uninstallation finishes, the following dialog
box appears.
7 Click [Close].
The [Found New Hardware] dialog box appears. 6 Click [Don’t search online] if the following dialog
box appears.
If the “Device driver software was not successfully The screen changes as follows.
installed” message appears and the [Found New
Hardware] dialog box does not appear, try
disconnecting and connecting the USB cable again.
If the [Found New Hardware] dialog box still does
not appear, perform the steps described below, with
the printer for which the printer driver is to be
installed turned on and connected to the computer.
(Any other USB printers or previously installed
printers should not be connected at this time.)
9 Click [Close].
12 Click [Close].
This completes installation of the printer driver.
Windows Vista
This section describes how to remove the printer driver.
Note
Before starting the uninstallation procedure, the printer 6 Click [Yes].
should not be connected to the computer, and the
computer should be turned off. If the [Found New
Hardware] dialog box appears, disconnect the cable When the printer driver has been uninstalled, the
between the computer and printer, click [Cancel] on all following dialog box appears.
screens to close the dialog box, and then start the
uninstallation procedure once more.
This completes the installation of the printer driver When the printer driver has been uninstalled, the
with Windows XP. following dialog box appears.