3.exercise - SCCM Microsoft
3.exercise - SCCM Microsoft
3.exercise - SCCM Microsoft
Note: At the top of the results pane, the Users indicator shows that there are 32 items in the results pane.
Note: At the top of the results pane, the Devices indicator shows that 8 items are in the results pane.
4. In the AND Name row, in the Enter valid characters text box, type LON, and then click Search.
8. In the AND Operating System row, in the Enter valid characters text box, type Server, and then
click Search.
Note: Note that the results contain three servers LON-SVR2, LON-SVR1, and LON-CFG.
9. In the AND Operating System row, delete Server, and in the Enter valid characters text box,
type Windows, and then click Search.
Note: The results show that all the LON computers run a Windows operating system.
2. Click User Collections.
3. Double-click All Users. This runs a local node search automatically, and displays all the
members of the collection.
5. In the AND Name row, click contains, and then note the options available for refining the
search.
6. Click starts with, type Adatum\T in the Enter valid characters text box, and then
click Search. The results are now limited to the Adatum users whose names begin with T.
Note: Notice the different Object Types and Workspaces that the search returns.
Note: You should notice that the sticky nodes from your previous searches were closed when the
console was closed.
2. On the ribbon, click Saved Searches. This displays a drop-down list of the saved searches
categories.
Note: The only available option is global searches: Manage Searches for All Objects.
5. Click Saved Searches, and click Manage Searches for Current Node. Note that no searches are
available, and click Cancel.
8. Click Saved Searches, and click Manage Searches for Current Node. Note that the T users search is
available, and click Cancel.
10. On the ribbon, click Saved Searches, and then click Manage Searches for All Objects.
Result: At the end of this exercise, you should have performed both local node and global searches. You also should have refined the local node
search and saved the custom local node search for future use. Finally, you should have observed the differences between saving a global search and
saving a local node search. You can view the expected results in the lab answer key.
2. When prompted in the Windows PowerShell window, on the keyboard, press A, and then press
Enter.
3. To view all of the cmdlets in the Configuration Manager module for Windows PowerShell, at the
Windows PowerShell command prompt, type the following command, and then press Enter:
1. To view a list of devices, in the Windows PowerShell window, type the following
command, and then press Enter:
2. To view a list of distribution points, in the Windows PowerShell window, type the
following command, and then press Enter:
Get-CMDistributionpoint
3. To view a list of management points, in the Windows PowerShell window, type the
following command, and then press Enter:
4. To view a list of packages, in the Windows PowerShell window, type the following
command, and then press Enter:
5. To view a list of applications, in the Windows PowerShell window, type the following
command, and then press Enter:
6. To view a list of sites, in the Windows PowerShell window, type the following
command, and then press Enter:
7. To view a list of users, in the Windows PowerShell window, type the following
command, and then press Enter:
8. To view a list of user collections, in the Windows PowerShell window, type the
following command, and then press Enter:
9. To view a list of device collections, in the Windows PowerShell window, type the
following command, and then press Enter:
Result: At the end of this exercise, you will have used Windows PowerShell to determine information about Configuration Manager devices,
distribution and management points, packages, applications, sites, users, and user and device collections.
3. On the ribbon, click the Home tab, click the Start drop-down list box, and then
click Configuration Manager Service Manager.
7. From the Log filename field, write down the name of the log file that displays.
3. To dismiss the Configuration Manager Service Manager dialog box, click OK. You can dismiss the
messages about error communicating with components. This message indicates that some
components are not configured, which is expected.
4. Scroll through the list of services, and note that some services are not running. To remove the
highlighting, click SMS_POLICY_PROVIDER.
5. Right-click SMS_POLICY_PROVIDER, and click Stop. Note that the status display does not change.
Result: At the end of this exercise, you should have used Configuration Manager Service Manager to manage Configuration Manager components by
adjusting the log file sizes, and stopping and starting components.
Note: All of the icons should have a green circle with a white check mark to indicate that they are okay. If there are any red circles with a white X
(Critical), notify your instructor.
2. In the Status Messages: Set Viewing Period dialog box, retain the default settings, and then
click OK.
3. In Configuration Manager Status Message Viewer for <S01> <Adatum Site>, click View, and
then click Filter.
6. Examine the status message, and write down the Process ID information.
7. To close the Status Message Details dialog box, click OK, and then close the Configuration
Manager Status Message Viewer for <S01> <Adatum Site>.
Note: If any of the components display a red circle with a white X, notify your instructor.
3. In the Status Messages: Set Viewing Period dialog box, retain the default settings, and
then click OK.
4. Note the number of entries between the latest 5104 milestone and the previous 5104
milestone.
Note: This is the same status that you reviewed in the previous task.
7. Close Configuration Manager Status Message Viewer for <S01> <Adatum Site>, and close
the Configuration Manager console.
Result: At the end of this exercise, you should have examined the status messages for a site system and a component.
Exercise 5: Reviewing log files by using the Configuration Manager Trace tool
Task 1: Use the Configuration Manager Trace Log tool
5. In the Configuration Manager Trace Log Tool, click File, and then click Open.
8. Click Tools, and click Find. In the Find text box, type the Process ID that you recorded earlier, and then
click Find.
9. To find the next entry, press the F3 key, and repeat until there are no more new responses.
10. Scroll up until you see the previous highlighted entry. Note the number of entries between the two
milestones.
Question: How does the number of events between milestones compare to the number of events shown in
the status message viewer?
Answer: Typically there are more entries in the log file than in the status message viewer.
12. In the Filter Settings dialog box, select the Filter when the Entry Text check box.
14. In the text box next to the Filter when the Entry Text drop-down list box, type the Process ID that you
recorded earlier, and then click OK.
6. In the Create Query Wizard, on the General page, click Edit Query Statement, and then click
the Criteria tab.
11. In the Criterion Properties dialog box, verify that in the Operator box, the is equal to option is
selected.
4. In the Create Query Wizard, on the General page, click Edit Query Statement, and then click
the Criteria tab.
6. In the Criterion Properties dialog box, click the Criterion Type drop-down list, and then select List of
values.
7. Click Select.
10. In the Criterion Properties dialog box, verify that in the Operator box, the is in option is selected.
Result: After this exercise, you should have created and tested data queries in Configuration Manager.
Task 1: Create a query for users who are in the Marketing department
3. In the Object Type drop-down list, click User Resource, and then click Edit Query Statement.
6. In the Select Attribute dialog box, in the Attribute drop-down list, click Unique User Name, and then
click OK.
8. In the All Marketing Users Query Statement Properties dialog box, click the Criteria tab, and then
click New ( ).
12. In the Criterion Properties dialog box, verify that in the Operator box, the is equal to option is selected.
Task 2: Create a query for users who are not in the Marketing department
4. In the Create Query Wizard, on the General page, click Edit Query Statement, and then click
the Criteria tab.
5. In the Users Not in the Marketing Group Query Statement Properties dialog box, click New
( ).
10. Click Browse, browse to and select the All Marketing Users query, and then click OK.
12. In the Users Not in the Marketing Group Query Statement Properties dialog box, click OK.
16. Right-click the Users Not in the Marketing Group query, and then click Run.
• When you finish the lab, keep the virtual machines running because you will need them for the next
lab in this module.
Result: After this exercise, you should have created and tested a subselected data query in Configuration Manager.
1. On LON-CFG, click Start, expand Microsoft SQL Server 2016, and then click Reporting Services
Configuration Manager.
4. Under Report Server Service Account, in the Network Service drop-down list, verify that the Network
Service account is being used.
5. Click the Web Service URL node, and review the default settings. Click Apply.
9. On the Database page, click Next.
14. Click the URL, and then verify that the SQL Server Reporting Services Home page appears.
6. On the Proxy page, click Next.
7. On the System Role Selection page, select the Reporting services point check box, and then click Next.
15. Open File Explorer, and then navigate to and open the C:\Program Files\Microsoft Configuration
Manager\Logs\srsrpsetup.log file.
Task 3: Test the reporting services point in the Configuration Manager console
1. In the Monitoring workspace, expand Reporting, and then click Reports.
Note: You might have to refresh the console until all reports display. You can
also monitor the C:\Program Files\Microsoft Configuration
Manager\Logs\srsrp.log file for status on the deployed reports. It will take
several minutes for the reports to be deployed.
Task 4: Test the reporting services point in the SQL Server Reporting Services website
1. Open Internet Explorer. In the address bar, type http://LON-CFG/Reports, and then press Enter.
• When you finish the lab, keep the virtual machines running because you will need them for the next lab in
this module.
Result: After this exercise, you should have installed and configured a reporting services point and tested it by opening reports in both
the Configuration Manager console and the SQL Server Reporting Services (SSRS) website.
3. In the center panel, right-click All Desktop and Server Clients, and then click Start CMPivot.
4. Click Create Collection.
6. Click Next.
8. Click Summary.
9. On the Summary page, click Next.
2. Click Computer Management.
8. Click Create.
9. Click Close.
10. Select Users, and then verify that the user account Bill is listed under it.
13. Click Add… .
14. In the Select Groups window, in the Enter the object names to select text box, type Administrators.
15. Click OK twice.
3. In the center panel, right-click All Desktop and Server Clients, and then click Start CMPivot.
3. In the File name text box, type List of who is in the local Administrator group, and then click Save.
4. On the computer’s desktop, double-click the List of who is in the local Administrator group.csv file.
5. In the How do you want to open this file? Window, select Notepad, and then click OK.
6. Notice these results are the same as the results listed in the CMPivot results pane.
7. Close Notepad.
4. In the CMPivot (All Desktop and Server Clients) window, on the Query tab, replace existing text
with Services | where State == 'Stopped'.
5. Click the Run Query button.
7. Replace existing text with Services | where State == 'Stopped' | summarize count() by Caption.
11. Review results in both the query box and the results area.
Additional Reading: When you have time, try changing “where” to “Where” in one the queries, and then run it. Note the errors generated.
Lab Answer Key: Module 3: Preparing the Configuration Manager management infrastructure
Lab A: Configuring boundaries and resource discovery
2. In the System Center Configuration Manager console, click the Administration workspace, and then expand Hierarchy Configuration.
5. In the Active Directory Forest Discovery Properties dialog box, select the following check boxes:
o Automatically create Active Directory site boundaries when they are discovered
Do not select the Automatically create IP address range boundaries for IP subnets when they are discovered check box.
7. When you see the Do you want to run full discovery as soon as possible? message, click Yes.
Note: Before continuing, wait approximately one minute for the discovery to complete and for boundary objects to be created.
8. Click the Boundaries node, and then refresh the details pane. It might take a minute or two for the results to display.
Note: Do not continue until you see the following boundaries created by the Active Directory Forest Discovery method:
• Sydney
• Toronto
Note: Notice the London boundary group in the results pane. This has been preconfigured for the labs
in this course.
2. Right-click London, and then click Properties. Notice that AdatumHQ is the only member of this
group.
3. Click the References tab.
Note: Notice that the S01-Adatum Site is used for site assignment for all clients that are part of the
boundaries assigned to this boundary group. LON-CFG.Adatum.com is configured as policy and
content location for the boundary group.
10. Under Site assignment, select the check box next to Use this boundary group for site assignment.
17. Under Site assignment, select the check box next to Use this boundary group for site assignment.
Configure fallback
6. Click OK to close the Fallback Boundary Groups dialog box. This will ensure that if a client cannot find a
distribution point within 10 minutes, it will fall back and use the Distribution point in London.
Result: After completing this exercise, you should have created and configured boundaries and boundary groups.
2. In the results pane, double-click Active Directory System Discovery. Notice that the Enable
Active Directory System Discovery check box is selected and that several organizational units
(OUs) have been configured.
3. Click New.
5. In the Select New Container dialog box, click the Toronto Clients container, and then click OK.
6. Verify that the Recursively search Active Directory child containers check box is selected, and
then click OK.
9. Verify that the Enable delta discovery check box is selected and that the interval is configured
as 5 minutes, and then click OK.
10. Right-click Active Directory System Discovery, and then click Run Full Discovery Now.
11. When Configuration Manager displays the Do you want to run full discovery as soon as
possible? message, click Yes.
6. Verify that the Recursively search Active Directory child containers check box is selected,
and then click OK.
8. Verify that the Enable delta discovery check box is selected with an interval of 5 minutes.
10. Right-click Active Directory User Discovery, and then click Run Full Discovery Now.
11. When Configuration Manager displays the Do you want to run full discovery as soon as
possible? message, click Yes.
Note: Notice that the client was discovered by using the SMS_AD_SYSTEM_DISCOVERY_AGENT component and that it resides in the Toronto Clients OU.
4. Click Close.
5. In the Assets and Compliance workspace, click the Users node. Notice the users that have been discovered in the Adatum domain.
6. In the Assets and Compliance workspace, click the User Collections node. Notice that the Toronto Users collection shows a member count of 5.
9.
After the hourglass icon appears on the Toronto Users collection, with the Toronto Users collection selected, click Refresh. (You might need to click Refresh additio
the number does not refresh, first update the All Users and User Groups collection.
10. Click the Administration workspace, expand the Hierarchy Configuration node, and then click the Active Directory Forests node.
11. In the preview pane, click the Domains tab. Notice that the Adatum.com domain has been discovered.
12. Click the Discovery Status tab, and then verify that the discovery has succeeded.
13. Click the Publishing Status tab, and verify that the publishing has succeeded.
14. In the results pane, right-click Adatum.com, and then click Show Active Directory Sites. Notice that three sites have been discovered: AdatumHQ, Sydney, and Tor
15. In the results pane, right-click Adatum.com, and then click Show IP Subnets. Notice that three IP subnets have been discovered:
o 172.16.0.0/24
o 172.16.1.0/24
o 172.16.2.0/24
Result: After completing this exercise, you should have configured discovery methods and viewed the discovery results.
2. In the System Center Configuration Manager console, click the Assets and Compliance workspace, and
then click the Device Collections node. Notice that several created collections exist.
3. Right-click Device Collections, and then click Create Device Collection.
5. In the Comment box, type Based upon the Active Directory Toronto Clients organizational unit, and
then click Browse.
6. In the Select Collection dialog box, ensure that Device Collections is selected, select the All Windows 10
Workstations collection, and then click OK.
10. In the Query Rule Properties dialog box, ensure that System Resource is listed, and then click Edit Query
Statement.
13. In the Criterion Properties dialog box, in the Criterion Type box, ensure that Simple value is selected,
and then click Select.
14. In the Select Attribute dialog box, configure the following options, and then click OK:
o Attribute: System OU Name
15. In the Criterion Properties dialog box, ensure that the Operator value is set to is equal to, and then in
the Value box, type ADATUM.COM/TORONTO CLIENTS.
19. In the Create Device Collection Wizard, on the Membership Rules page, ensure that both Use
incremental updates for this collection and Schedule a full update on this collection are selected, and
then click Next.
22. Ensure that the Device Collections node is selected, and then in the results pane, select the Toronto
Windows 10 Workstations collection.
23. To refresh the collection, press F5, and then double-click the Toronto Windows 10
Workstations collection.
Result: After this exercise, you should have created device collections based on an Active Directory OU and on queries.
2.
In the System Center Configuration Manager console, click the Assets and Compliance workspace, and
then click the User Collections node. Notice that several created collections already exist.
3.
Right-click User Collections, and then click Create User Collection.
5.
In the Comment box, type Based upon Membership of the Toronto Users collection and the Managers
OU in Active Directory, and then click Browse.
7.
In the Create User Collection Wizard, click Next.
10.
In the Query Statement Properties dialog box, click Criteria, and then click New.
13.
In the Attribute list, click User OU Name, and then click OK.
16.
On the Membership Rules page, click Next twice, and then click Close.
17. In the list of user collections, click Toronto Managers, and then on the ribbon, click Update Membership.
19. With the User Collections node selected, in the results pane, double-click the Toronto
Managers collection.
20. Verify that only the seven Toronto managers are in the collection.
Result: After this exercise, you should have created a user collection that includes and filters members of other collections.
1. If the Configuration Manager console is not already open, on LON-CFG, on the taskbar, click
the Configuration Manager Console icon in the Taskbar.
2. In the System Center Configuration Manager console, click the Assets and Compliance workspace,
and then click the Device Collections node.
o Start: 8 P.M.
o End: 4 A.M.
o Recurrence pattern: Daily
3. In the Configuration Manager console, click the Administration workspace, expand Site Configuration, and then click Servers and Site System
Roles.
4. In the results pane, right-click \\LON-CFG.Adatum.com, and then click Add Site System Roles.
6. On the Proxy page, click Next.
7. On the System Role Selection page, select the Fallback status point check box, and then click Next.
Note: The summary page should list existing settings plus the fallback status point. If there is an issue, click Previous to change the settings.
Note: The completion page should show that everything installed successfully. If it does not, contact your instructor.
After clicking Close, the details pane should display the fallback status point that you have added to the LON-CFG server.
11. In the preview pane, right-click the Management point role, and then click Properties.
12. Select the Generate alert when the management point is not healthy check box.
15. In the Hierarchy Settings Properties dialog box, select the Use a fallback site check box, and then click OK.
Result: After completing this exercise, you should have installed and configured a fallback status point.
Exercise 2: Deploying the Configuration Manager client software by using client push installation
2. On the ribbon, click Settings, click the Client Installation Settings drop-down list box, and then click Client Push Installation.
3. Click the Accounts tab.
4. Verify that Adatum\ClientInstall is configured as a Client Push Installation account. This is pre-configured for the lab and is not a default
account.
6. On the Installation Properties tab, in the Installation properties box, after SMSSITECODE=S01 type the following on one line each separated
by a space:
5. Review the Summary page, verify that one resource is going to be installed, and then click Next.
6. On the Completion page, click Close.
2. Right-click the taskbar, click Task Manager, click More details, and then click Details.
3. Wait for the ccmsetup.exe process to complete, and then verify that CcmExec.exe displays in the list of processes.
6. In the log file, click Edit and then click Find, search for Successfully. If the installation was successful, you will see Installation succeeded near
the end of the file.
7. In the ccmsetup.log – Notepad window, search for Installing. Verify that entries for each prerequisite display as installed by ccmsetup.
8. In the ccmsetup.log – Notepad window, search for Fallback. Verify that entries for the state messages display as sent by ccmsetup.
13. Click Configuration Manager, and then on the General tab, verify that the Site code shows SMS: S01.
14. Click the Components tab. Verify that most of the components display as Installed and as Enabled. Verify that the Software Metering
Agent is Enabled.
Note: This indicates that the client has downloaded client settings from a management point.
15. Click the Site tab. Verify that the DISABLESITEOPT=True that was configured in the installation properties was applied, and that the Configure
Settings button is unavailable.
17. Verify that SMSCACHEDIR=Cache SMSCACHEFLAGS=MAXDRIVE that was configured in the installation properties was applied, and that the
Cache folder is set to C:\Cache\ccmcache.
Result: After completing this exercise, you should have installed a client using the client push method, and verified that the client was installed with
your custom settings.
4. In the Client Status Settings Properties dialog box, set all of the evaluation periods to 3 days.
3. Expand Task Scheduler, expand Task Scheduler Library, expand Microsoft, and then click Configuration Manager.
5. Wait for the Last Run Result to change to The operation completed successfully. You might have to click Refresh to view updated results.
Note: The client health report could take up to 10 minutes before status is reported back to the site server, stored in the database, and is ready to
update the display.
1. Switch to LON-CFG.
2. Verify that the Configuration Manager console is still open to the Monitoring workspace, and to the Client Status folder.
7. In the Clients that passed client check from All Desktops and Server Clients temporary node, examine the contents of the Summary tab.
8. Click the Client Check Detail tab. Verify whether the client failed any rules.
1. In the Configuration Manager console, click the Monitoring workspace, and then click the Client Activity node.
4. Click the Client Activity Detail tab, and then examine the client summary information.
1. In the Configuration Manager console, click the Assets and Compliance workspace, click the Device Collections node.
3. In the All Desktop and Server Clients Properties dialog box, click the Alerts tab, and then click Add.
4. In the Add New Collection Alerts dialog box, under Client status, select the following check boxes, and then click OK:
o Client check pass or no results for active clients falls below threshold (%)
5. In the All Desktop and Server Clients Properties dialog box, under Conditions, select Client check, and then in the text box for threshold value,
ensure that it is set to 95.
1. Switch to LON-CL1.
10. Expand Task Scheduler, expand Task Scheduler Library, expand Microsoft, and then click Configuration Manager.
12. Wait for the Last Run Result to change to The operation completed successfully. This will take a few minutes to complete, and you might need
to refresh the display.
13. Click Services.
Question: What is the status and startup type for the Windows Management Instrumentation service?
Answer: The status is Running (Started), and the startup type is Automatic.
Question: What is the status for the SMS Agent Host service?
15. Close all open windows, and then sign out of LON-CL1.
Result: After this exercise, you should have configured client status monitoring and verified client remediation.
2. In the Configuration Manager console, click the Assets and Compliance workspace, and then click the Device Collections node.
10. In the Attribute name text box, select Name. In the Value text box, type LON-CL1, and then click Next.
17. Click Refresh, and verify that the results pane for the Member Count column displays 1 member in the London Clients collection. You may
need to click Refresh several times over the course of 5 minutes before this information is displayed.
1. In the Configuration Manager console, click the Administration workspace, and then click the Client Settings node.
1. Right-click the Client Settings node, and then click Create Custom Client Device Settings.
2. In the Create Custom Client Device Settings dialog box, in the Name text box, type LON Desktop Systems.
4. In the Select and then configure the custom settings for client devices section, select the Software Metering check box.
7. Click OK to accept changes, and close the Create Custom Client Device Settings dialog box.
1. Switch to LON-CL1, and if not already signed in, sign in as Adatum\Administrator with the password Pa55w.rd.
2. If the Control Panel is not open, right-click the Start button, and then click Control Panel.
4. Click the Actions tab, click Machine Policy Retrieval & Evaluation Cycle, and then click Run Now.
7. Verify that the Power Management Agent is Installed, and that the Software Metering Agent is Disabled.
Result: After this exercise, you should have created a collection, and configured Default Client Settings. You also should have created and assigned a
custom client device setting. Additionally, you should have verified that both settings were applied to a system.
2. In the Configuration Manager console, click the Assets and Compliance workspace, and then click the Devices node.
3. Select LON-CFG.
4. Right-click LON-CFG and then point to Client Notification. Take note of the management tasks that can be run.
6. Click OK.
4. On the General tab, remove the check mark next to Script authors require additional script approver. Note that this is only done in this lab so
that the administrator can approve the script manually.
8. In the Create Script wizard, next to Script name enter Create Folder and File.
12. On the Script Parameters page, click Edit. Take notice of how you can change default values.
14. On the Summary page, click Next and then click Close. Notice that the Approval State shows Waiting for approval.
15. Select the Create Folder and File script and then in the ribbon click Approve/Deny. The Approve or Deny Script wizard starts. Click Next twice.
21. In the Run Script wizard, select the Create Folder and File script and then click Next.
24. Click Next.
28. Select the Create Folder and File script and notice its Overall Script Execution State.
Lab Answer Key: Module 5: Managing inventory for PCs and applications
Lab A: Configuring and managing inventory collection
6. Click Schedule.
8. To configure the schedule to run the task every two days, in the Run every box, type or select 2, and then click OK.
Task 2: Configure hardware inventory for the All Windows 10 Workstations collection
2. In the Create Custom Client Device Settings dialog box, in the Name text box, type All Windows 10 Workstations Client Device Settings.
4. Under the Select and then configure the custom settings for client devices option, select the Hardware Inventory check box.
5. In the left pane, click Hardware Inventory, and then under Device Settings, verify that the Hardware Inventory schedule is set to 2 days.
7. In the Hardware Inventory Classes dialog box, click Filter by category, and then click Windows Clients & Server Classes.
o BitLocker (Win32_EncryptableVolume)
10. In the results pane, right-click All Windows 10 Workstations Client Device Settings, and then click Deploy.
11. In the Select Collection dialog box, click the All Windows 10 Workstations collection, and then click OK.
12. With the All Windows 10 Workstations Client Device Settings object selected, in the preview pane, note the information on
the Summary and Deployments tabs.
1. In the Configuration Manager console, click the Assets and Compliance workspace, and then click Device Collections.
2. Right-click the All Windows 10 Workstations collection, point to Client Notification, and then click Download Computer Policy.
Note: Wait a minute for the policy update to finish before you proceed to the next task.
2. Click Control Panel.
6. When Configuration Manager displays the message “The selected cycle will run and might take several minutes to finish,” click OK.
Note: Wait at least five minutes for the hardware inventory cycle to finish before you proceed to the next task. You can follow the inventory process
as it occurs by viewing the InventoryAgent.log file on the client, and the Dataldr.log file on the site server.
1. On LON-CFG, in the Configuration Manager console, click the Assets and Compliance workspace, and then click Device Collections.
2. In the results pane, right-click All Windows 10 Workstations, and then click Show Members.
3. In the results pane, right-click LON-CL1, point to Start, and then click System Center Configuration Manager - Resource Explorer.
4. In System Center Configuration Manager - Resource Explorer, expand the Hardware node. Verify that the custom inventory classes are visible,
as indicated by the following nodes:
o BitLocker
o Boot Configuration
Result: After this exercise, you should have configured hardware inventory agent for all clients, and configured a custom hardware inventory agent
setting for all Windows 10 clients.
1. On LON-CFG, if the Configuration Manager console is not open, on the taskbar, click the Configuration Manager Console icon.
5. Under Device Settings, verify that the Enable software metering on clients option is set to Yes.
6. Click Schedule, and verify that the Simple schedule option is selected. To change the schedule to run every two days, in the Run every box,
type or select 2, and then click OK.
2. In the navigation pane, right-click Software Metering, and then click Create Software Metering Rule.
5. Click wordpad.exe, and then click Open. Notice that the File name, Original file name, Version, and Language boxes populate automatically.
6. In the Version text box, delete the existing version text, and then type the asterisk wildcard character (*).
7. In the Language drop-down list box, click – Any –, and then click Next.
1. In the Configuration Manager console, right-click Software Metering, and then click Software Metering Properties.
2. In the Software Metering Properties dialog box, ensure that Automatically create disabled metering rules from recent usage inventory
data is enabled.
3. In the Specify the percentage of computers in the hierarchy that must use a program before a software metering rule is automatically
created box, type or select a setting of 5.
4. In the Specify the number of software metering rules that must be exceeded in the hierarchy before the automatic creation of rules is
disabled box, type or select a setting of 30.
2. Click Control Panel.
4. Click the Actions tab.
5. Under Actions, click Machine Policy Retrieval & Evaluation Cycle, and then click Run Now.
Note: Wait at least two minutes for the policy update to finish before you move to the next task.
1. On LON-CL1, click Start.
3. Close WordPad.
5. Click the Notepad item.
6. Close Notepad.
7. Repeat steps 1 to 6 several times to generate test-metering data in the log files.
2. Click Control Panel.
4. Click the Actions tab.
5. Under Actions, click Software Metering Usage Report Cycle, and then click Run Now.
Note: Wait at least two minutes for the report cycle to finish before you move to the next task. You also can view the swmproc.log file on the site
server to see when the client data has been processed.
3. Double-click cmtrace.exe.
4. On the File menu, click Open.
9. Scroll down, and then verify that the following entries are present for wordpad.exe:
Note: The Process ID xxx corresponds to the decimal value that this application has in the task manager. The RuleID S0100yyy is the rule
number that is assigned automatically when you create each software-metering rule. The Found match and Tracked usage lines indicate
that the client is metering the configured software.
If the entries do not exist, scroll down, and then verify that the following entries are present for notepad.exe:
2. In Windows PowerShell, type the following command, and then press Enter:
.\RunMeterSumm.exe CM_S01
4. Review the output of the RunMeterSumm command. Verify that the number of rows added to File Usage Summary is greater than 0.
3. Right-click the Computers that have run a specific metered software program report, and then click Run.
7. In the Parameter Value dialog box, click the current month, and then click OK.
9. In the Parameter Value dialog box, click the current year, and then click OK.
11. Review the report, and then close all open windows.
Result: After this exercise, you should have configured software metering, and then viewed software-metering information by using a report.
4. In the Default Settings dialog box, click Hardware Inventory. Verify that the Enable hardware inventory on clients option is set to Yes.
5. In the Default Settings dialog box, click Software Metering. Verify that the Enable software metering on clients option is set to Yes.
2. In the Group Policy Management console tree, expand Forest: Adatum.com, expand Domains, expand Adatum.com, and then click Group
Policy Objects.
4. In the Group Policy Management Editor, expand Computer Configuration, expand Policies, expand Windows Settings, expand Security
Settings, expand Local Policies, and then click Audit Policy.
6. On the Audit logon events Properties page, click Define these policy settings. Verify that the Success check box is selected, and then click OK.
7. Close the Group Policy Management Editor, and then close the Group Policy Management Console.
10. In the Administrator: Windows PowerShell window, at the command prompt, type the following command, and then press Enter:
gpupdate /force
11. In the Administrator: Windows PowerShell window, at the command prompt, type the following command, and then press Enter:
exit
Result: After this exercise, you should have prepared the site for Asset Intelligence.
2. In the Configuration Manager console, click the Assets and Compliance workspace, and then click the Asset Intelligence node. Notice the
information that displays on the Asset Intelligence home page.
4. In the Edit Inventory Classes dialog box, verify that the Enable only the selected Asset Intelligence reporting classes option is selected.
5. For the Asset Intelligence reporting classes, select all check boxes except the SMS_InstalledExecutable and SMS_SoftwareShortcut check
boxes.
1. In the Configuration Manager console, click the Administration workspace, expand the Site Configuration node, and then click Servers and
Site System Roles.
2. In the results pane, right-click \\LON-CFG.Adatum.com, and then click Add Site System Roles.
4. On the Proxy page, click Next.
5. On the System Role Selection page, select the Asset Intelligence synchronization point check box, and then click Next.
7. On the Specify the Asset Intelligence synchronization behavior page, ensure that the option Enable synchronization on a schedule is selected,
and that it is set to run every 7 days, and then click Next.
8. On the Summary page, click Next.
9. On the Completion page, click Close.
10. Click the Assets and Compliance workspace, and then click Asset Intelligence. In the results pane, under Catalog Synchronization, review the
status details. Click Refresh. Notice that the Asset Intelligence synchronization point status shows that the Sync point has deployed.
Note: Wait for the installation of the Asset Intelligence synchronization point to complete, and then refresh the console before proceeding to the next
task.
1. In the Assets and Compliance workspace, right-click Asset Intelligence, point to Synchronize, and then click Schedule Synchronization.
Note: If the option is not available, refresh the console, or click on another node, and then click the Asset Intelligence node again.
2. In the Asset Intelligence Synchronization Point Schedule dialog box, verify that the Simple schedule option is selected.
Result: After this exercise, you should have enabled Asset Intelligence reporting classes, configured an Asset Intelligence synchronization point, and
scheduled synchronization.
Exercise 3: Monitoring license agreements by using Asset Intelligence
2. In the Configuration Manager console, click the Assets and Compliance workspace, and then click the Asset Intelligence node.
3. Expand the Asset Intelligence node, and then click Catalog. Take note of the default categories and families that display in the results pane.
5. In the Create Software Category Wizard, on the General page, in the Category name text box, type Adatum Developed.
7. On the Summary page, click Next.
8. On the Completion page, click Close.
10. In the Create Software Family Wizard, on the General page, in the Family name text box, type Custom Software.
11. In the Description text box, type Special use, custom application software, and then click Next.
15. In the Create Custom Label Wizard, on the General page, in the Label name text box, type Unsupported. In the Description text box,
type Software not supported by Adatum IT, and then click Next.
1. In the System Center Configuration Manager console, click the Assets and Compliance workspace, and then click the Asset Intelligence node.
6. On the Summary page, click Next.
7. On the Completion page, click Close.
Note: LicenseData.csv was created for the lab, and it contains information about Microsoft Silverlight.
2. Click Control Panel.
4. Click the Actions tab.
5. Under Actions, select Machine Policy Retrieval & Evaluation Cycle, and then click Run Now.
Note: Wait at least two minutes for the policy update to finish before you proceed to the next task.
2. Click Control Panel.
Result: After this exercise, you should have customized the Asset Intelligence Catalog to reflect a number of custom software settings, and then
created a new software category, a new software family, and a new software label. You also should have imported a license statement into Asset
Intelligence.
4. Click the Asset Intelligence folder. Notice the various Asset Intelligence reports that display in the results pane.
5. In the results pane, right-click Hardware 03A - Primary computer users, and then click Run.
6. In the Collection area, click Values.
8. Click View Report. In the results pane, click adatum\administrator, and then review the results.
10. In the Configuration Manager console, in the results pane, right-click License 15A - General License Reconciliation Report, and then click Run.
12. In the Parameter Value dialog box, click the All Systems collection, and then click OK.
15. In the results pane of the Configuration Manager console, right-click Software 01A - Summary of installed software in a specific collection,
and then click Run.
16. In the Software 01A - Summary of installed software in a specific collection window, in the Collection area, click Values.
17. In the Parameter Value dialog box, click the All Windows 10 Workstations collection, and then click OK.
20. In the maximum rows to return text box, type 100, and then click View Report.
21. Review the report, and then close the Software 01A - Summary of installed software in a specific collection window.
2. In the Configuration Manager console, click the Asset and Compliance workspace, and then expand the Asset Intelligence node.
5. In the Lifecycle data for installed products table, on the System Center Configuration Manager current branch, version 1810 row, record the
end date for mainstream support.
7. In the Lifecyle 01A – Computer with a specific software product window, review the results, and then close the window.
11. Click the Asset Intelligence folder. Notice the various Asset Intelligence reports that are displayed in the results pane.
12. In the results pane, right-click Lifecycle 02A - List of machines with expired products in the organization, and then click Run.
Note: If you are running this lab on April 30, 2020 or later, System Center Configuration Manager current branch, version 1810 will be listed in
the Lifecycle 02A - List of machines with expired products in the organization report.
16. Verify that there are no expired Products, and then click Cancel.
17. Close the Lifecycle 02A - List of machines with expired products in the organization window.
20. Click the Asset Intelligence folder. Notice the various Asset Intelligence reports that are displayed in the results pane.
21. In the results pane, right-click Lifecycle 03A - List of expired products found in the organization, and then click Run.
Note: If you are running this lab on April 30, 2020 or later, System Center Configuration Manager current branch, version 1810 will be listed in
the Lifecycle 03A - List of expired products found in the organization report.
23. Close the Lifecycle 03A - List of expired products found in the organization window.
26. Click the Asset Intelligence folder. Notice the various Asset Intelligence reports that are displayed in the results pane.
27. In the results pane, right-click Lifecycle 04A - General product lifecycle overview, and then click Run.
31. In the Parameter Value dialog box, click the System Center Configuration Manager current branch, version 1810 group name, and then
click OK.
35. Verify that the report shows three computers are running System Center Configuration Manager current branch, version 1810, and there is a
link to get more details about upgrading Configuration Manager.
39. Click the Asset Intelligence folder. Notice the various Asset Intelligence reports that are displayed in the results pane.
40. In the results pane, right-click Lifecycle 05A - Product lifecycle dashboard, and then click Run.
44. Verify that the report shows three computers running System Center Configuration Manager current branch, version 1810; the mainstream
support end Date is given as 4/30/2020; the remaining numbers of days for which the product will receive support; and a link to learn more
about upgrading Configuration Manager.
After you finish the lab, revert the VMs to their initial state. To do this, complete the following steps.
Result: After this exercise, you should have reviewed Asset Inventory data by using reports.