GPS Vehicle Tracker User Manual: Preface
GPS Vehicle Tracker User Manual: Preface
GPS Vehicle Tracker User Manual: Preface
Preface
Thank you for purchasing our products. This deliberately edited manual is to introduce the tracker with the
complete technical data and the instructions showing how to operate the device smoothly and correctly. Make
sure to read this manual carefully before using this product. Most problems could be solved through the
explanations and the troubleshooting tips. Once you finish reading it, keep it handy for necessary reference.
Please note that specification and information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or
omissions in this document.
Content
Ⅰ. Preface……….…………………………….…………….……………………….….………... 1
Ⅱ. Attentions………………………………….………………..…………………….…….…….. 1
Ⅲ Hardware description…..…………….………………………………..………….……….… 2
Ⅳ. Main function…………………………………………………...………………………...….. 2
Ⅴ. Usage……………………………………………………………………………………....….. 2
Ⅵ. Installation diagram……………………………………………….……………………..…... 4
Ⅶ. Installation………………………………...…………………………………………..….…... 5
Ⅷ. Application…………………...………………………………………….………………….… 6
Ⅸ.Specification……………………………………………………………………………....……6
Ⅹ.Guarantee……………………………………………………...……………………………… 6
Attention
1. Make sure to read this manual carefully before using this product.
2. Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the
tracker will not work normally.
3. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to
host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions
about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
4. The tracker works in wireless communications, so please cut off the host power before your vehicles entering
fuel depot and dangerous material place.
5. The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work voltage.
6. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives and sends radio
frequency signal when it is working.
7. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the
noticed place.
2. Start up
Put the SIM card in place and installed the tracker in the car, the red indicator is on. In 10 or 40 seconds, the unit
will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep
flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the
unit has been located.
◆Main functions
1. Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and
get the working status. You can choose the Positioning Platform by yourself.
2. Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button
and the installed unit will send out alarm to the authorized numbers.
3. Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and
anytime.
4. Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can
monitor the sound around 5 meter.
5. Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the
unit will send the movement alert to all authorized numbers.
.6. Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed,
the unit will send the overspeed alert to all authorized numbers.
7. Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to all authorized numbers when it breaches the district.
9. Restart the unit: send SMS to resume the default of unit.
10. Auto Track: You can set up auto track by SMS or on-line positioning platform.
11. Mileage statistics; ACC checking; cutting off power and alarm.
12. Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm
warning.
﹡Modify the IP and Port of Communication Protocol for different on-line positioning platform
INDICATOR
FOR SIGNALS
MICROPHONE
SIM CARD
◆Set up
1. Set administrator
Send SMS admin123456 to the unit, it will make the cell phone number as authorized administrator number.
Delete the authorized number from the administrator cell phone, it will be back to no administrator.
5. Control Oil
Send SMS stopoil+password to control oil.For example send SMS:stopoil123456 "stop oil"as instructions,
"123456"as password. To supply the oil again, send SMS supplyoil+password to the unit.
For example, send SMS Supplyoil123456 to the tracker. "Supply" as instruction, "123456" as the password. If
there is no authorized number, all number can control oil. If there is already an authorized number, only the
authorized number can control oil.
7. Monitor mode
There are three mode for monitor.
1﹞ All Monitor mode: Send SMS “Allmonitor” to the unit, the unit will return to this mode. In this mode, any
number can monitor this unit.
2﹞ Restrict monitor mode: Send SMS “Restrictmonitor” to the unit, the unit will return to this mode. In this
mode, authorized number can monitor this unit.
3﹞ Close monitor mode: Send SMS “closemonitor” to the unit, the unit will return to this mode. In this mode,
all numbers can not monitor this unit.
8. Movement alert
Set up: The user can send SMS Move+password to the unit, then the unit will reply move ok! .In case of such a
movement, it will send SMS Move along with a Geo-info to the authorized numbers.
For example, send SMS Move123456 to the unit. "Move" as instructions, “123456”as password.
Cancel: Send SMS nomove+password to deactivate the movement alert.
9. Overspeed alert
Set up: Send SMS speed+password+space+080 to the unit (support the speed is 80km/h).
For example, send SMS speed123456 080. "speed" as instructions, "80" as limit speed, “123456”as password.
Cancel: Send SMS nospeed+password to deactivate the overspeed alert.
15. Set the intervals time for replying the location according to ACC on or off
(That is car stopping or moving)
Command: “Accon+space+time” or “accoff+space +time”
4