Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 119 views

    Sop For DM Transfer

    Uploaded by

    KUSH SHARMA
    1. The document provides the standard operating procedure for starting up and shutting down a DM transfer pump. It outlines 11 steps for starting up the pump including ensuring valves are open, protections are in place, and monitoring the pump once started. 2. To shut down the pump, the stop command is given from the DCS or field and the pump is put on standby with certain valves remaining open. 3. Four steps are outlined for allowing maintenance on the pump including isolating valves and electrical connections. Safety PPEs like ear plugs and gloves are also listed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Sop For DM Transfer

    Uploaded by

    KUSH SHARMA
    119 views3 pages
    1. The document provides the standard operating procedure for starting up and shutting down a DM transfer pump. It outlines 11 steps for starting up the pump including ensuring valves are open, protections are in place, and monitoring the pump once started. 2. To shut down the pump, the stop command is given from the DCS or field and the pump is put on standby with certain valves remaining open. 3. Four steps are outlined for allowing maintenance on the pump including isolating valves and electrical connections. Safety PPEs like ear plugs and gloves are also listed.

    Original Description:

    Original Title

    SOP FOR DM TRANSFER

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides the standard operating procedure for starting up and shutting down a DM transfer pump. It outlines 11 steps for starting up the pump including ensuring valves are open, protections are in place, and monitoring the pump once started. 2. To shut down the pump, the stop command is given from the DCS or field and the pump is put on standby with certain valves remaining open. 3. Four steps are outlined for allowing maintenance on the pump including isolating valves and electrical connections. Safety PPEs like ear plugs and gloves are also listed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    119 views3 pages

    Sop For DM Transfer

    Uploaded by

    KUSH SHARMA
    1. The document provides the standard operating procedure for starting up and shutting down a DM transfer pump. It outlines 11 steps for starting up the pump including ensuring valves are open, protections are in place, and monitoring the pump once started. 2. To shut down the pump, the stop command is given from the DCS or field and the pump is put on standby with certain valves remaining open. 3. Four steps are outlined for allowing maintenance on the pump including isolating valves and electrical connections. Safety PPEs like ear plugs and gloves are also listed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    Standard Operating Procedure Issue no.

    : 05
    Issue date: 01.04.2020
    Revi no. : 00
    WCL/TPP/DPM-08 Revi. Date : --
    Title: SOP FOR DM TRANSFER PUMP Section No.: 13

    Sr.No. Description

    START UP: For starting DM transfer pump proceed as stated below:

    When a PUMP is kept in Remote & Auto MODE-

    Its suction & Discharge will be kept open, unless specific logic & Protection is implemented & its
    1
    minimum re-circulation valve is open condition.

    START UP CHECKS :

    1 Ensure clearance from maintenance & get clearance from field operator to start.

    2 Ensure DM storage tank level is Normal.

    3 Ensure suction valve is in Open condition.

    4 Coupling guard is in position & fastened firmly.

    5 Ensure discharge valve is in closed condition.

    6 Ensure Deaerator Make-up control valve & it’s bypass are in closed condition.

    7 Ensure boiler initial filling line valve is in closed condition.

    8 Ensure it’s minimum re-circulation valve is in Open condition.

    Page 1 of 3
    Standard Operating Procedure Issue no. : 05
    Issue date: 01.04.2020
    Revi no. : 00
    WCL/TPP/DPM-08 Revi. Date : --

    9 Ensure that all protection & interlock are in service.

    10 Give Start command by operating from field (LJB) or from DCS.

    11 Once pump achieves normal speed, open the discharge valve slowly.

    12 Check for any abnormal sound, direction of rotation, current, vibration, Bearing
    temperatures etc & Record.

    STOPPING : To stop a DM transfer pump follow below mentioned steps.

    1 Give Stop command either from DCS or from Field (LJB).

    If the pump is kept as an Stand-by :

    Don’t Isolate: Suction Valve, Minimum re-circulation & Discharge valve.

    Allowing for Maintenance :

    1 Isolate Suction valve.

    2 Isolate Re-circulation valve.

    3 Isolate Discharge valve.

    4 Isolate from Electrical side.

    Page 2 of 3
    Standard Operating Procedure Issue no. : 05
    Issue date: 01.04.2020
    Revi no. : 00
    WCL/TPP/DPM-08 Revi. Date : --
    SAFTEY PPE’s : Ear Plugs, Safety Goggles, Hand Gloves, F-rod etc.

    Page 3 of 3

    You might also like