SPECIALTY CLARIFICATION

& COAGULATION SOLUTIONS

CHEMISTRY FOR A GREENER WORLD

INTRODUCING THE LATEST
SERIES OF WATER & WASTEWATER
TREATMENT SOLUTIONS
VYTAL's broad range of products and technical services focus on enhancing the water quality and efficiency of
water treatment. The board range ensures that we can meet diverse and challenging process requirements.

SPECIALTY CLARIFICATION & COAGULATION SOLUTIONS

Efficient water management is the critical need in treatment of raw water, sludge and wastewater. Water quality is
the prime focus to a variety of industries and municipal corporations. Our new age formulations of performance
chemicals - VYTAL is curated specifically keeping this in mind. We supplement these new generation specialty
chemicals with our wide application knowledge and expertise.

ABOUT US:
Grasim Industries Limited - Chemical Division is part of the Aditya Birla Group, which is a US $ 48.3 billion corporation. We are
among the largest producer of Chlor-Alkali products globally, catering to vast array of applications with our premium range of
Specialty chemicals. We offer Products & Technical services for superior performance in Water treatment applications like
Municipal drinking water, Sewage wastewater, ETP, Sludge-free clarification of pools, and pre-treatment / process treatment for
various industries.

APPLICATIONS:

OIL INDUSTRY SWIMMING POOL & WATER PARK

Separation of oil from water, refinery, oil Delivers good performance in effectively removing
exploration and edible oil industry. suspended impurities and results in lesser water
Vytal 2810, Vytal 971 drainage. Vytal CO-Pool

PROCESS INDUSTRY RESIN

For handling process clays, coal ash Vytal 3310, Vytal 971 are specially designed to
and cultivation/ separation of algae. treat effluents from Epoxy units and have proved
Vytal 712, Vytal 613 to reduce overall treatment cost.

TEXTILE FLUORIDE REMOVAL TECHNOLOGY

Our range has preformed exceptionally well in Excessive fluoride in drinking water cause fluorosis
removing colour and COD of textile effluents disease. Vytal CFR 2302 is a superior performance
and CETPs. Vytal 2803, Vytal 630, Vytal 641 & chemical that reduces Fluoride from water.
Vytal 971

CETP CLARIFICATION WITH LONGER SHELF LIFE

Used mainly in primary treatment process, Vytal SAB 18 Plus maintains its concentration up
resulting in significant reduction in COD, colour, to its shelf life of 4 months. Vytal HBC Supra is a
total suspended solids, etc. We have been strong performing liquid product. It does not
serving around 8 Large CETPs. Vytal CO 18 ET, reduce water pH and there is lesser ingress of
Vytal CO 14 ET Chloride and conductivity.

Collaboration with Top OEMs

CERTIFICATIONS: R&D, WATER LAB FACILITY, TECHNICAL SERVICES:
Our DSIR recognised R&D facilities and state-of-the-art Water application centre are
focused on providing customised solutions for Coagulation, Clarification and
Disinfection of water.

Filed 4 patents DSIR Recognition Collaboration with Technical Support

in March 2017 National Institutes starting from lab trial to
like DST, NEERI, NCL, plant scale application
CIFE, MNIT and post sale support

VYTAL 612
It is high performance liquid PARAMETERS SPECIFICATIONS
clarification aid for settling of
process chemicals, Industrial Physical form Slight yellow to color-less liquid
water & wastewater and may Specific gravity at 25°C 1.3 - 1.4
be used in other industrial
applications. It is recommended pH of 5% aq. solution, w/v 3.5 - 4.5
as cationic clarification aid. Insoluble, % by mass, max. 0.5

Viscosity at 25°C, mPaS 100 - 300

VYTAL 613
It is recommended as cationic PARAMETERS SPECIFICATIONS
clarification aid for settling of
substrate & clarification of water Physical form Slight yellow to color-less liquid
and wastewater. It is also used Specific gravity at 25°C 1.3 - 1.4
for settling of algal bloom.
pH of 5% aq. solution, w/v 3.5 - 4.5

Insoluble, % by mass, max. 0.5

Viscosity at 25°C, mPaS 50 - 200

 VYTAL 641
It is a high performance PARAMETERS SPECIFICATIONS
de-coloring agent for removal
of dispersed dyes, colloidal and Physical form Slight yellow to color-less liquid
suspended impurities. It enables Specific gravity at 25°C 1.3 - 1.4
fast settling of material, resulting
pH of 5% aq. solution, w/v 3.5 - 4.5
in low retention time required in
the process. It is designed to Insoluble, % by mass, max. 0.5
meet all the discharge parameters
Viscosity at 25°C, mPaS 20 - 200
in term of pH, COD, Colour,
TOC, etc.

VYTAL 2803
It is highly efficient coagulant PARAMETERS SPECIFICATIONS
for removal of natural organic
impurities, bio residues, oil & Physical form Yellow to brown color liquid
grease, colour, etc. It is Specific gravity at 25°C 1.35 - 1.39
recommended for industries like
pulp & paper, leather, food and pH of 5% aq. solution, w/v 3.5 - 4.5
refinery. Industrial application Insoluble, % by mass, max. 0.5
may include coagulation of
Viscosity at 25°C, mPaS 0-1
natural impurity, pollutant, as
de-emulsifier, coagulation of
anionic colloidal impurities &
dyes, and sludge dewatering.

VYTAL 2810
It is recommended as cationic PARAMETERS SPECIFICATIONS
coagulant for removal of colloidal
dissolved/ suspended impurities Physical form Slight yellow to color-less liquid
& clarification of water and Specific gravity at 25°C 1.3 - 1.4
wastewater. Industrial application
may include anionic trash pH of 5% aq. solution, w/v 3.5 - 4.5
controller, as paper additive and Insoluble, % by mass, max. 0.5
sizing agent, as deemulsifier,
Viscosity at 25°C, mPaS 100 - 500
coagulation of anionic colloidal
impurities & dyes, sludge
dewatering, etc.
 VYTAL A971
It is high molecular weight, PARAMETERS SPECIFICATIONS
highly charged anionic flocculant.
It is used in various liquid solid Appearance White / off white granular powder
separation systems in different Molecular weight High
industries. It is popular in sludge
dewatering process, raw water ph (0.1 solution) 4-9
and wastewater clarification. Bulk density 0.6 - 0.9 g/cc
It can also be used after
application of cationic coagulant
at inlet of clari-flocculator,
thickener or in the stream for
proper mixing.

VYTAL HBC SUPRA

It is high performance liquid PARAMETERS SPECIFICATIONS
cationic coagulant for
clarification of water, Industrial Appearance Clear colorless liquid
wastewater and exhibits higher Specific gravity at 25°C 1.3 - 1.4
performance at lower dosage
than other conventional pH of 5% solution 3.0 - 7.0
coagulants. This results in Viscosity, mPas 20 - 80
negligible residual aluminium in
Active content, % 45 - 55
the treated water. It is best suited
for Municipal Water Treatment Turbidity NTU < 50
and industries like pulp & paper,
pharmaceutical, leather, food
and refinery.

VYTAL PACKAGING

Vytal is available in 25/50/250 kg HM-HDPE drums, 1000 kg IBCs, 35 kg carboys,

25 kg bags, and road tankers.
YOUR TRUSTED PARTNER IN
TOTAL WATER QUALITY MANAGEMENT

Manufactured & Marketed by:

Grasim Industries Limited (Chemical Division)

Birla Aurora, 10th Floor, Dr. A.B. Road, Worli, Mumbai 400030, India
www.adityabirlachemicals.com

+91-22-24399132
customerservice.vaps@adityabirla.com

Aditya Birla Management Corporation Private Limited is the owner of all the Trademarks and Copyright subsisting therein. Grasim Industries Limited is using said trademark
and artistic work under license from ABMCPL. Specifications and service level assurances are not binding and are subject to change without prior notice. Prospective
purchasers are advised to conduct their own tests and studies to determine the suitability of our products for their particular purposes and specific applications. All images are
for representation purposes only.

Product Disclaimer: If a Product supplied hereunder is not free of defects, the Company shall after satisfying itself that the Product is defective, either (i) endeavor promptly to
replace such Product with conforming Product at the Company’s expense, or (ii) reimburse the Buyer any amount paid for the defective Product for the invoiced value of the
previously supplied Product, however the Company is not obligated to compensate any incidental costs incurred by the customer in use of defective product. For the
avoidance of doubt, the Company liability for the Products supplied to the Buyer is limited to defects which appear within the shelf life in the technical description of the
Product in question.

Copyright © 2020 Grasim Industries Limited. All rights reserved.