MATRIX TESTING MACHINE SERVICES

(CALIBRATION DIVISION)-ACCREDITED BY NABL

(A Constituent Board of Quality Council of India)
Address : Office No. 813, Eighth Floor, Rama Equator
Near Finolex Chowk, Pimpri, Pune - 411018 Maharashtra
Mobile No. +91 7276001181 I +91 9850005291 I E mail id : info@matrixfie.com I calibration@matrixfie.com
SITE CALIBRATION CERTIFICATE FOR UNIVERSAL TESTING MACHINE
Certificate No. : MATRIX/CAL/2021-22/06/1179 ULR - CC306921000001153F O.A. No. : 1111
Issue Date. : 02.06.2021 Page No. : 1 of 1
Name of Customer Equipment Under Calibration Calibration Conditions
M/s. Tata Steel BSL Limited Mode Compression Referred Standard IS 1828 (Part-1): 2015
Isamba Phata, Khopoli - Pen Max. Capacity 5000 N Calibration Procedure M-WI-01-UTM-IS
Road,Khopoli - 410203 (MH) Make ETECH Date of Calibration 02.06.2021
Model ------- Next Calibration due on 01.06.2022
Sr. No. ------- Calibrated By SRP
ID No. SE-ETM-2000 Calibrated Start End Mean
Location LABORATORY at TempoC 25 25 25
DETAILS OF FORCE PROVING INSTRUMENT USED FOR CALIBRATION
Make/Model/Capacity HBM/S40A 50kg/500N HBM/S40A1t/10kN
Sr. No./Gauge Sr. No. 31457374 / MP/DI/31457374 31664110 / MP/DI/31664110
Cal Certficate No. & FRI/02/21/13074 FRI/05/19/11555
Cal Date. 23-02-21 23-02-21
Next Calibration due on 23-04-23 23-04-23
U.I.M at 95% C.L. ± 0.12 % ± 0.134 %
Traceability to National
FRI, Ichalkaranji FRI, Ichalkaranji
Standards
Caibrated at temp. 24ᴼC 24ᴼC
CALIBRATION RESULTS
Force Test Force Standard Temp. Averrage % Relative % Relative Actual
Proving in kN Instrument Corrected Observed Readings Observed Repeatability Accuracy Expanded
Instrument Reading Std. (Div / count) Reading Error Error Uncertainty
Used (Div / Reading (Div / (%)
count) (Div) 1 2 3 count) (±)
00 1200 2400
Range : 0 - 5 kN Certified Range: 0.2 - 5 kN L.C. : 0.001 kN Avg TempoC: 25
0.2 8034 ---- 8040 8057 8069 8055.33 0.36 0.27 0.48
500 N 0.3 12056 ---- 12075 12097 12103 12091.67 0.23 0.30 0.48
Load Cell 0.4 16084 ---- 16098 16110 16156 16121.33 0.36 0.23 0.46
0.5 20100 ---- 20122 20161 20189 20157.33 0.33 0.29 0.48
0.5 1003 ---- 1002 1005 1006 1004.33 0.40 0.13 0.42
1.0 2010 ---- 2011 2015 2018 2014.67 0.35 0.23 0.44
10 kN 2.0 4019 ---- 4025 4018 4035 4026.00 0.42 0.17 0.44
Load Cell
4.0 8029 ---- 8030 8049 8066 8048.33 0.45 0.24 0.48
5.0 10033 ---- 10042 10038 10082 10054.00 0.44 0.21 0.48
Max.Observed Reading on removal of force (Fio): 0.00 kN Max. Zero Error: 0.00 %
Max. Relative Resolution (a): 0.50 %
Maximum Expanded Uncertainity = 0.98 % (Minimum equal to CMC of LAB)
Maximum expanded uncertainty at 95% confidence level with coverage factor k = 2 is including maximum accuracy error.
Classification of the machine as per Clause No. 7 (Table-2) of IS 1828 (Part-1): 2015
Class of Maximum Permissible Values in %
Machine Releative Error
Range Accuracy (q) Repeatability (b) Zero (fo) Relative Resolution (a)
1 ± 1.0 1.0 ± 0.1 0.5
2 ± 2.0 2.0 ± 0.2 1.0
3 ± 3.0 3.0 ± 0.3 1.5
Remarks: Class of Machine : Class 1
1. This machine has been verified and the accuracy error found within limits.
Note :
1. The above calibration is done at the site of customer.
2. The calibration results reported in this certificate are valid at the time of and under the stated condition of measurement and
is only for the calibrated item as identified in this certificate.
3. This calibration certificate shall not be reproduced, except in full, unless written permission for a publication of an approved
abstract has been obtained from M/s. Matrix Testing Machine Services (Calibration Division), Pune.
4. The machine shall in any case be verified (Re-calibrated) if it is moved to a new location necessitating dismantling
or if it is subject to major repairs or adjustments.
Calibrated By Authorized By

Mr. Swarup Patil Mr. Alpesh Tamrakar

Calibration Engineer Technical Manager
----- END OF CERTIFICATE ----- MF-38/0
Authorized Dealer of FIE, Ichalkaranji l Saroj, Ichalkaranji l Diamond Tools, Ichalkaranji l Mashproject, Russia
Website : www.matrixtestingmachineservices.com l www.matrixfie.com
SALES, SERVICING & CALIBRATION OF UNIVERSAL TESTING MACHINES l HARDNESS TESTERS l BALANCING MACHINES
AUTHORIZED DEALER OF FIE,Ichalkaranji l SAROJ,Jaysinghpur l DIAMOND TOOLS, Ichalkaranji l Mashproject, Russia