JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,

Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 1 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Permanent Facility
CHEMICAL-
1 ATMOSPHERIC Ambient Air Nitrogen Dioxide (NO2) IS 5182 P-6
POLLUTION
CHEMICAL-
2 ATMOSPHERIC Ambient air Noise IS 4758
POLLUTION
CHEMICAL-
3 ATMOSPHERIC Ambient air Ozone (O3) IS 5182 P-9
POLLUTION
CHEMICAL-
4 ATMOSPHERIC Ambient Air Sulphur Dioxide (SO2) IS 5182 P-2
POLLUTION
CHEMICAL-
Ambient Air / Work Respirable Suspended
5 ATMOSPHERIC IS 5182 P-23
Zone Air Particular
POLLUTION
CHEMICAL-
6 ATMOSPHERIC Ambient Noise Noise IS 9876
POLLUTION
CHEMICAL-
7 ATMOSPHERIC DG Set Noise Noise IS 4758
POLLUTION
Fugitive /stationary
CHEMICAL-
source/
8 ATMOSPHERIC Carbon Dioxide (CO2) IS 13270
stack/chimney-
POLLUTION
emission
Fugitive /stationary
CHEMICAL-
source/ Oxide of Nitrogen (NO2
9 ATMOSPHERIC IS 11255 (Part-7)
stack/chimney- as NO2)
POLLUTION
emission

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 2 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Fugitive /stationary
CHEMICAL-
source/ IS 11255 (Part-I), RA
10 ATMOSPHERIC Particulate Matter (pm)
stack/chimney- 2003
POLLUTION
emission
Fugitive /stationary
CHEMICAL-
source/ IS 11255 (Part-2), RA
11 ATMOSPHERIC Sulphur dioxde (SO2)
stack/chimney- 2003
POLLUTION
emission
CHEMICAL- BUILDING
12 Admixture Ash Content Test IS 9103 RA-2013
MATERIAL
CHEMICAL- BUILDING
13 Admixture Chloride test IS 6925 RA-2008
MATERIAL
CHEMICAL- BUILDING
14 Admixture Dry material content test IS 9103 RA-2013
MATERIAL
CHEMICAL- BUILDING
15 Admixture Relative Density test IS 9103 RA-2013
MATERIAL
CHEMICAL- BUILDING Mineral Materials (Ash)
16 Bitumen IS 1217 RA-2009
MATERIAL test
CHEMICAL- BUILDING
17 Bitumen Solubility in test IS 1216 RA 2009
MATERIAL
CHEMICAL- BUILDING
18 Cement Insouluble Residue test IS 4032 RA 2009
MATERIAL
CHEMICAL- BUILDING
19 Cement Loss on Ignition Test IS 4032 RA-2009
MATERIAL
CHEMICAL- BUILDING
20 Cement Sulphuric Anhydride test IS 4032 RA-2009
MATERIAL
CHEMICAL- BUILDING Sulphuric anhydride
21 Fly Ash IS 1727 RA- 2013
MATERIAL (SO3) test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 3 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- METALS &

22 Aluminium Alloys Chromium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
23 Aluminium Alloys Cobalt ASTM E 1251
ALLOYS
CHEMICAL- METALS &
24 Aluminium Alloys Copper ASTM E 1251
ALLOYS
CHEMICAL- METALS &
25 aluminium Alloys Iron ASTM E 1251
ALLOYS
CHEMICAL- METALS &
26 Aluminium alloys Lead ASTM E 1251
ALLOYS
CHEMICAL- METALS &
27 Aluminium Alloys Manganese ASTM E 1251
ALLOYS
CHEMICAL- METALS &
28 Aluminium Alloys Nickel ASTM E 1251
ALLOYS
CHEMICAL- METALS &
29 Aluminium Alloys Silicon test ASTM E 1251
ALLOYS
CHEMICAL- METALS &
30 Aluminium alloys Titanium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
31 Aluminium Alloys Vanadium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
32 Aluminium Alloys Zinc ASTM E 1251
ALLOYS
CHEMICAL- METALS & carbon and low alloy
33 Aluminium ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
34 Boron ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
35 Carbon ASTM E415
ALLOYS steel

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 4 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- METALS & carbon and low alloy

36 Chromium ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
37 Cobalt ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
38 Copper ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
39 Manganese ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
40 Molybdenum ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
41 Nickel ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
42 Niobium ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
43 Phosphorus ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
44 Silicon ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
45 Sulphur ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
46 Titanium ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
47 Tungsten ASTM E415
ALLOYS steel
CHEMICAL- METALS & carbon and low alloy
48 Vanadium ASTM E415
ALLOYS steel
CHEMICAL- METALS &
49 Cast Iron / SG Iron Carbon ASTM E 1999
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 5 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- METALS &

50 Cast Iron / SG Iron Chromium ASTM E 1999
ALLOYS
CHEMICAL- METALS &
51 Cast Iron / SG Iron Molybdenum ASTM E 1999
ALLOYS
CHEMICAL- METALS &
52 Cast Iron / SG Iron Nickel ASTM E 1999
ALLOYS
CHEMICAL- METALS &
53 Cast Iron / SG Iron Phosphorus ASTM E 1999
ALLOYS
CHEMICAL- METALS &
54 Cast Iron / SG Iron Silicon ASTM E 1999
ALLOYS
CHEMICAL- METALS &
55 Cast Iron / SG Iron Sulphur ASTM E 1999
ALLOYS
CHEMICAL- METALS &
56 Cast Iron /SG Iron Manganese ASTM E 1999
ALLOYS
CHEMICAL- METALS &
57 Copper & its alloys Aluminium BS EN 15079
ALLOYS
CHEMICAL- METALS &
58 Copper & its alloys Copper BS EN 15079
ALLOYS
CHEMICAL- METALS &
59 Copper & Its alloys Iron Test BSEN 15079
ALLOYS
CHEMICAL- METALS &
60 Copper & Its alloys lead BSEN 15079
ALLOYS
CHEMICAL- METALS &
61 Copper & its alloys Nickel BS EN 15079
ALLOYS
CHEMICAL- METALS &
62 Copper & Its alloys Phosphorous BS EN 15079
ALLOYS
CHEMICAL- METALS &
63 Copper & its alloys Silicon BS EN 15079
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 6 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- METALS &

64 Copper & its alloys Tin BS EN 15079
ALLOYS
CHEMICAL- METALS &
65 Copper & Its alloys Zinc BSEN 15079
ALLOYS
CHEMICAL- METALS &
66 Cost iron / SG Iron Copper ASTM E 1999
ALLOYS
CHEMICAL- METALS & Ferrous Metals &
67 Tin Test ASTM E415 RA-2005
ALLOYS Alloys Steel
CHEMICAL- METALS &
68 Stainless Steel Carbon ASTMD 1086
ALLOYS
CHEMICAL- METALS &
69 Stainless Steel Chromium ASTMD 1086
ALLOYS
CHEMICAL- METALS &
70 Stainless steel Copper ASTMD 1086
ALLOYS
CHEMICAL- METALS &
71 Stainless steel Manganese ASTMD 1086
ALLOYS
CHEMICAL- METALS &
72 Stainless Steel Molybdenum ASTMD 1086
ALLOYS
CHEMICAL- METALS &
73 Stainless Steel Nickel ASTMD 1086
ALLOYS
CHEMICAL- METALS &
74 Stainless Steel Niobium ASTMD 1086
ALLOYS
CHEMICAL- METALS &
75 Stainless steel Phosphorus ASTMD 1086
ALLOYS
CHEMICAL- METALS &
76 Stainless Steel Silicon ASTMD 1086
ALLOYS
CHEMICAL- METALS &
77 Stainless Steel Sulphur ASTMD 1086
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 7 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- METALS &

78 Stainless Steel Titanium ASTMD 1086 RA-2005
ALLOYS
CHEMICAL- METALS &
79 Stainless steel Vanadium ASTMD 1086
ALLOYS
Waste Water (
CHEMICAL- POLLUTION & Bio-Chemical Oxygen
80 Industrial/ Domestic IS 3025 (P-44) RA-2009
ENVIRONMENT Demand (BOD) Test
Effluent)
Waste Water (
CHEMICAL- POLLUTION & Chemical Oxygen
81 Industrial/ Domestic IS 3025 (P-58)
ENVIRONMENT Demand (COD) test
Effluent)
Waste Water (
CHEMICAL- POLLUTION &
82 Industrial/ Domestic Conductivity test IS 3025 (P-14) RA-2013
ENVIRONMENT
Effluent)
Waste Water (
CHEMICAL- POLLUTION &
83 Industrial/ Domestic Fluoride test IS 3025 (P-60) RA-2014
ENVIRONMENT
Effluent)
Waste Water (
CHEMICAL- POLLUTION &
84 Industrial/ Domestic PH test IS 3025 (P-11) RA-2013
ENVIRONMENT
Effluent)
Waste Water (
CHEMICAL- POLLUTION &
85 Industrial/ Domestic Total dissolve solid Test IS 3025 (P-16) RA-2012
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
86 (Industrial/ Acidity as CaCo3 Test IS 3025 P-22 RA-2014
ENVIRONMENT
Domestic)
Waste Water
CHEMICAL- POLLUTION &
87 (Industrial/Domestic Alkalinity as CaCo3 IS3025 P-23 RA-2014
ENVIRONMENT
Effluent)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 8 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Waste Water
CHEMICAL- POLLUTION &
88 (Industrial/Domestic Calcium as Ca IS 3025 P-40 RA-2014
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
89 (Industrial/Domestic Dissolved Oxygen O2 IS 3025 p-38
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
90 (Industrial/Domestic Free Residual Chlorine IS 3025 P-26 RA-2003
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
91 (Industrial/Domestic Magnesium as Mg Test IS 3025 P-59
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
92 (Industrial/Domestic Nitrate as NO3 IS 3025 P-34 RA-2003
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
93 (Industrial/Domestic Nitrite as NO2 IS 3025 P-34 RA-2003
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
94 (Industrial/Domestic Oil & Grease Test IS 3025 P-39
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
95 (Industrial/Domestic Potasium as k IS 3025 P-45
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
96 (Industrial/Domestic Sodium as Na Test IS 3025 P-53 RA-2014
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
97 (Industrial/Domestic Sulphate as Test IS 3025 P-24 RA-2003
ENVIRONMENT
Effluent)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 9 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Waste Water
CHEMICAL- POLLUTION &
98 (Industrial/Domestic Total dissolve solid IS 3025 P-16 RA-201
ENVIRONMENT
Effluent)
Waste Water
CHEMICAL- POLLUTION &
99 (Industrial/Domestic Total hardness as CaCo3 IS3025 P-21 RA-2014
ENVIRONMENT
Effluent)
CHEMICAL- SOIL AND
100 Agriculture Soil Boron Test Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
101 Agriculture Soil Calcium Test Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND Cation Exchange
102 Agriculture soil Soil Manual Govt of India
ROCK Capacity
CHEMICAL- SOIL AND
103 Agriculture Soil Conductivity Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
104 Agriculture Soil Copper Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
105 Agriculture Soil Iron Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
106 Agriculture Soil Manganese Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
107 Agriculture soil MOISTURE Test IS 2720 P-2
ROCK
CHEMICAL- SOIL AND
108 Agriculture soil Nitrogen Test Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
109 Agriculture soil Organic Carbon Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
110 Agriculture soil PH IS 2720 P-26
ROCK

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 10 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

CHEMICAL- SOIL AND

111 Agriculture soil phosphorus test Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
112 Agriculture Soil Potassium Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
113 Agriculture Soil Sulphur Soil Manual Govt of India
ROCK
CHEMICAL- SOIL AND
114 Agriculture Soil Zinc Soil Manual Govt of India
ROCK
115 CHEMICAL- WATER CRM Arsenic test IS 3025 (P-37) RA-2014
116 CHEMICAL- WATER Drinking Water Acidity as CaCo3 test IS 3025 (P-22) RA-2014
Acidity as Volume of
100ml sample used
117 CHEMICAL- WATER Drinking Water neutralize 0.02N NaOH, IS 3025 (P-22) RA-2014
Using phenolphthalein
indicator Test
118 CHEMICAL- WATER Drinking Water Alkalinity as CaCo3 test IS 3025 (P-23) RA-2014
Alkalinity as volume of
100ml sample used
119 CHEMICAL- WATER Drinking Water IS 3025 (P-23) RA-2014
neutralize 0.02N H2SO4,
Using Mix indicator Test
120 CHEMICAL- WATER Drinking Water Calcium test IS3025 (P-40) RA-2014
121 CHEMICAL- WATER Drinking Water Chloride test IS 3025 (P-32) RA-2014
122 CHEMICAL- WATER Drinking Water Conductivity Test IS 3025 (P-14) RA-2013
123 CHEMICAL- WATER Drinking Water Fluoride test IS 3025 (P-60) RA-2014
124 CHEMICAL- WATER Drinking Water Inorganic Material test IS 3025 (P-18) RA-2012
125 CHEMICAL- WATER Drinking Water Iron test IS 3025 (P-53) RA-2014
126 CHEMICAL- WATER Drinking Water Magnesium test IS 3025 (P-46) RA-2014

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 11 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

127 CHEMICAL- WATER Drinking Water Odour test IS 3025 (P-5)

128 CHEMICAL- WATER Drinking Water Organic Material test IS 3025 (P-18) RA-2012
129 CHEMICAL- WATER Drinking Water PH test IS 3025 (P-11) RA-2012
130 CHEMICAL- WATER Drinking Water Phosphorus test IS 3025 (P-31) RA-2014
131 CHEMICAL- WATER Drinking Water Phosphorus test IS 3025 (P-31) RA-2014
132 CHEMICAL- WATER Drinking Water Sulphate as So4 test IS 3025 (P-24) RA-2014
133 CHEMICAL- WATER Drinking Water Taste IS 3025 (P-7&8)
134 CHEMICAL- WATER Drinking Water Total Dissolve test IS 3025 RA-2012
Total Hardness as CaCo3
135 CHEMICAL- WATER Drinking Water IS 3025 (P-21) RA 2014
test
Total Suspended Solid
136 CHEMICAL- WATER Drinking Water IS 3025 (P-17) RA-2012
test
137 CHEMICAL- WATER Drinking Water Turbidity test IS 3025 (P-10) RA-2012
Acidity As Volume of
Water for 100ml sample used
138 CHEMICAL- WATER construction neutralize 0.02N NaOH, IS 3025 (P-22) RA-2014
purpose Using Phenolphthalein
indicator Test
Alkalinity as volume of
Water for
100ml sample used
139 CHEMICAL- WATER construction IS 3025 (P-23) RA-2014
neutralize 0.02N H2SO4,
purpose
Using Mix indicator Test
Water for
140 CHEMICAL- WATER construction Chloride test Is 3025 (P-32) Ra 2014
purpose
Water for
141 CHEMICAL- WATER construction Inorganic Material test IS 3025 (P-18) RA-2012
purpose

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 12 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Water for
142 CHEMICAL- WATER construction Organic Material test IS 3025 (P-18) RA-2012
purpose
Water for
143 CHEMICAL- WATER construction PH test IS 3025 (P-11) RA-2012
purpose
Water for
144 CHEMICAL- WATER construction Sulphate as SO3 test IS 3025 (P-24) RA-2014
purpose
Water for
145 CHEMICAL- WATER construction Total Dissolve test IS 3025 (P-16) RA-2012
purpose
Water for
Total Suspended Solid
146 CHEMICAL- WATER construction IS 3025 (P-17) RA-2012
test
purpose
MECHANICAL- BUILDINGS
147 Admixture Bleeding test IS 9103 RA-2004
MATERIALS
MECHANICAL- BUILDINGS compressive strength
148 Admixture IS 516 RA-2013
MATERIALS Test
MECHANICAL- BUILDINGS
149 Admixture Flexural Strength Test IS 516 RA-2013
MATERIALS
MECHANICAL- BUILDINGS Setting Time (initial and
150 Admixture IS 8142
MATERIALS Final) test
MECHANICAL- BUILDINGS
151 Admixture Slump test IS 1199
MATERIALS
SOP-
MECHANICAL- BUILDINGS Bitumen/ Modified
152 Bitumen Content test JKTRC/LAB/SOP/BITUMEN
MATERIALS Bitumen
/2.1. (IRC SP-11)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 13 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS Bitumen/ Modified

153 Ductility Test IS 1208 RA-2009
MATERIALS Bitumen
MECHANICAL- BUILDINGS Bitumen/ Modified
154 Flash & Fire Point test IS 1209
MATERIALS Bitumen
Hardness Test of
MECHANICAL- BUILDINGS Bitumen/ Modified
155 Bitumen Mastic Asphalt IS 1195
MATERIALS Bitumen
Test
MECHANICAL- BUILDINGS Bitumen/ Modified
156 Penetration Test IS 1203 RA-2009
MATERIALS Bitumen
MECHANICAL- BUILDINGS Bitumen/ Modified
157 Softening Point Test IS 1205 RA-2009
MATERIALS Bitumen
MECHANICAL- BUILDINGS Bitumen/ Modified Solubility in
158 IS 1216
MATERIALS Bitumen Trichloroethylene test
MECHANICAL- BUILDINGS Bitumen/ Modified Specific Gravity of
159 IS 1202 RA-2009
MATERIALS Bitumen Bitumen test
Test on residue From
MECHANICAL- BUILDINGS Bitumen/ Modified
160 rolling thin film oven IS 1208 RA-2009
MATERIALS Bitumen
(Ductility test at 25 °C)
Test on residue from
MECHANICAL- BUILDINGS Bitumen/ Modified
161 rolling thin film oven IS 1206 (Part-2)
MATERIALS Bitumen
(Viscosity Ratio at 60 °C)
MECHANICAL- BUILDINGS Bitumen/ Modified Test on Residue from
162 IS 9382
MATERIALS Bitumen rolling thin flim oven Test
MECHANICAL- BUILDINGS Bitumen/ Modified Viscosity (Absolute at 60
163 IS 1206 (P-2)
MATERIALS Bitumen °C Poise) test
MECHANICAL- BUILDINGS Bitumen/ Modified Viscosity (Kinematic at
164 IS 1206 (P-3)
MATERIALS Bitumen 135'C CST) test
MECHANICAL- BUILDINGS Bituminous Core Density
165 Bituminous Concrete MORTH 5th rev
MATERIALS Test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 14 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS
166 Bituminous Concrete Cleanliness test IS 2386 (P-2) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
167 Bituminous Concrete Combined FI & EI test IS 2386 (P-1) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
168 Bituminous Concrete Impact Value test IS 2386 (P-4) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
169 Bituminous Concrete Job Mix DBM/BM/BC MORTH 5th rev
MATERIALS
MECHANICAL- BUILDINGS
170 Bituminous Concrete Marshal Stability test ASTMD 6927-15
MATERIALS
MECHANICAL- BUILDINGS
171 Bituminous Concrete Sieve Analysis BC test MORTH 5th rev500
MATERIALS
MECHANICAL- BUILDINGS Sieve Analysis BM
172 Bituminous Concrete MORTH 5th rev500
MATERIALS (37.5mm at Sieve) test
MECHANICAL- BUILDINGS Sieve Analysis DBM
173 Bituminous Concrete MORTH 5th rev500
MATERIALS (37.5MM Sieve) test
MECHANICAL- BUILDINGS Soundness By Na2 So4 &
174 Bituminous Concrete IS 2386 (P-5)
MATERIALS MgSo4
MECHANICAL- BUILDINGS Specific Gravity of Filler
175 Bituminous Concrete IS 2720 (P-3) RA-2011
MATERIALS test
MECHANICAL- BUILDINGS
176 Bituminous Concrete Stripping Value test IS 624 RA-2008
MATERIALS
MECHANICAL- BUILDINGS
177 Bituminous Concrete Water Absorption test IS 2386 (P_3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
178 Blanketing material CBR test IS 2720 (P-16) RA-2015
MATERIALS
MECHANICAL- BUILDINGS Co-efficient Curvature
179 Blanketing material IS 2720 (P-4) RA-2015
MATERIALS (CC) test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 15 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS Proctor Density (MDD)

180 Blanketing material IS 2720 (P-8) RA-2015
MATERIALS test
MECHANICAL- BUILDINGS Proctor Density (OMC)
181 Blanketing material IS 2720 (P-8) RA-2015
MATERIALS Test
SOP-
MECHANICAL- BUILDINGS JKTRC/LAB/SOP/BLANKET
182 Blanketing material Sieve Analysis test
MATERIALS MATERIAL/3. (GE:IR-2
RDSO2007/GE0014)
MECHANICAL- BUILDINGS
183 Blanketing material Specific Gravity test IS 2720 (P-3)
MATERIALS
MECHANICAL- BUILDINGS Uniformity Co-efficient
184 Blanketing material IS 2720 (P-4) RA-2011
MATERIALS (CU) test
MECHANICAL- BUILDINGS Brick (Burnt Clay
185 Compressive Strength IS 3495 (P-1) RA-2011
MATERIALS Brick / Fly Ash)
MECHANICAL- BUILDINGS Brick (Burnt Clay
186 Dimensions IS 1077 RA-2011
MATERIALS Brick / Fly Ash)
MECHANICAL- BUILDINGS Brick (Burnt Clay
187 Efflorscence Test IS 3495 (P-3) RA-2011
MATERIALS Brick / Fly Ash)
MECHANICAL- BUILDINGS Brick (Burnt Clay
188 Water Absorption IS 3495 (P-2) RA-2011
MATERIALS Brick / Fly Ash)
MECHANICAL- BUILDINGS Compressive Strength
189 cement IS 4031 (P-6) RA-2014
MATERIALS (28 Days) test
MECHANICAL- BUILDINGS Compressive Strength (3
190 cement IS 4031 (P-6) RA-2014
MATERIALS Day) test
MECHANICAL- BUILDINGS Compressive Strength (7
191 cement IS 4031 (P-6) RA-2014
MATERIALS Days) test
MECHANICAL- BUILDINGS
192 cement Consistency test IS 4031 (P-4) RA-2014
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 16 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS
193 cement Density test IS 4013 (P-11) RA-1995
MATERIALS
MECHANICAL- BUILDINGS
194 cement Setting Time (Final) IS 4031 (P-5) RA-2014
MATERIALS
MECHANICAL- BUILDINGS
195 cement Setting Time (Initial) test IS 4031 (P-5) RA-2014
MATERIALS
MECHANICAL- BUILDINGS Soundness Autoclave
196 Cement IS 4031 (P-3) RA 2014
MATERIALS test
MECHANICAL- BUILDINGS Soundness Le-chatelier's
197 Cement IS 4031 (P-3) RA-2014
MATERIALS test
MECHANICAL- BUILDINGS cement Fineness by Blain Air
198 IS 4031 (P-2) RA-2008
MATERIALS (OPC,PPC,PSC) Permeability test
MECHANICAL- BUILDINGS Aggregate Impact Value
199 Coarse Aggregate IS 2386 (P-4) RA-2016
MATERIALS test
MECHANICAL- BUILDINGS
200 Coarse Aggregate Bulk Density Test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
201 Coarse Aggregate Coal & Lignite test IS 2386 (P-2) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
202 Coarse Aggregate Crushing Value test IS 2386 (P-4) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Deleterious material Clay
203 Coarse Aggregate IS 2386 (P-2) RA-2016
MATERIALS Lump test
MECHANICAL- BUILDINGS
204 Coarse Aggregate Flakiness test IS 2386 (P-1) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Los Angeles Abrasion
205 Coarse Aggregate IS 2386 (P-4) RA-2016
MATERIALS Value test
MECHANICAL- BUILDINGS Material Finerthan 75
206 Coarse Aggregate IS 2386 (P-1) RA-2016
MATERIALS micron test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 17 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS
207 Coarse Aggregate Sieve Analysis test IS 2386 (P-1) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Soundness by Na2So4 &
208 Coarse Aggregate IS 2386 (P-5) RA-2016
MATERIALS MgSo4
MECHANICAL- BUILDINGS
209 Coarse Aggregate Specific Gravity test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Ten Percent Fine Value
210 Coarse Aggregate IS 2386 (P-4) RA-2016
MATERIALS Test
MECHANICAL- BUILDINGS
211 Coarse Aggregate Water Absorption test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
212 Coarsw Aggregate Elongation test IS 2386 (P-1) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
213 concrete beem Flexural Strength test IS 516 RA-2013
MATERIALS
MECHANICAL- BUILDINGS concrete permeability
214 concrete cube DIN 1048
MATERIALS test
MECHANICAL- BUILDINGS concrete cube /
215 concrete design mix IS 10262
MATERIALS beam
MECHANICAL- BUILDINGS Compressive strength
216 concrete cubes IS 516 RA-2013
MATERIALS test
Compressive Strength
MECHANICAL- BUILDINGS
217 concrete cubes test (By Accelerated IS 516 RA 2013
MATERIALS
Boilling Water Method)
MECHANICAL- BUILDINGS Coagulation of Emulsion
218 Emulsion IS 8887
MATERIALS at Low Temperature test
MECHANICAL- BUILDINGS Coating Ability And
219 Emulsion IS 8887
MATERIALS resistance

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 18 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS
220 Emulsion Miscibility With Water IS 8887
MATERIALS
MECHANICAL- BUILDINGS Residue by Evaporation
221 Emulsion IS 8887
MATERIALS tset
MECHANICAL- BUILDINGS Residue on 600 Mic IS
222 Emulsion IS 8887
MATERIALS Sieve % by Mass Test
MECHANICAL- BUILDINGS Stability to the Mixing
223 Emulsion IS 8887
MATERIALS With cement test
MECHANICAL- BUILDINGS Storage Stability After 24
224 Emulsion IS8887
MATERIALS Hours Test
MECHANICAL- BUILDINGS Viscosity by say bolt
225 Emulsion IS 3117
MATERIALS furol test
MECHANICAL- BUILDINGS
226 Fine Aggregate Bulk Density test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
227 Fine Aggregate Bulking of Sand test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Deleterious Material
228 Fine Aggregate IS 2386 (P-2) RA-2016
MATERIALS (Clay Lump) test
MECHANICAL- BUILDINGS Deleterious Material
229 Fine Aggregate IS 2386 (P-2) RA-2016
MATERIALS (Coal & Lignite) test
Deleterious Material
MECHANICAL- BUILDINGS
230 Fine Aggregate (Material Finer than 75) IS 2386 (P-1) RA-2016
MATERIALS
test
MECHANICAL- BUILDINGS
231 Fine Aggregate Organic Impurities test IS 2386 (P-2) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Sieve Analysis test (on
232 Fine Aggregate IS 2386 (P-1) RA-2016
MATERIALS 4.75 mm sieve) Test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 19 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

SOP-
MECHANICAL- BUILDINGS JKTRC/LAB/SOP/FINE
233 Fine Aggregate Silt Content Test
MATERIALS AGGREGATE/4.1. (CPWD
Specification 2009)
MECHANICAL- BUILDINGS Soundness by Na2So4
234 fine Aggregate IS2386 (P-1) RA-2016
MATERIALS &MgSo4
MECHANICAL- BUILDINGS
235 Fine Aggregate Specific Gravity test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS
236 Fine Aggregate Water Absorption test IS 2386 (P-3) RA-2016
MATERIALS
MECHANICAL- BUILDINGS Compressive Strength at
237 Fly Ash IS 1727 RA-2013
MATERIALS 28 Day
MECHANICAL- BUILDINGS Fineness by Blain air
238 Fly Ash IS 1727 RA-2013
MATERIALS permeability test
MECHANICAL- BUILDINGS Soundness by Autoclave
239 Fly Ash IS 1727 RA-2013
MATERIALS Method
MECHANICAL- BUILDINGS GSB (Granular Sub Atterberg's Limit (Liquid
240 IS 2720 (P-5) RA-2015
MATERIALS Base) limit) test
MECHANICAL- BUILDINGS GSB (Granular Sub Atterberg's Limit (Plastic
241 IS 2720 (P-5) RA-2015
MATERIALS Base) Limit) test
MECHANICAL- BUILDINGS GSB (Granular Sub CBR (California Bearing
242 IS 2720 (P-16) RA-2015
MATERIALS Base) Ratio) Soak test
MECHANICAL- BUILDINGS GSB (Granular Sub
243 Impact Value test IS 2386 (P-4) RA-2016
MATERIALS Base)
Proctor Density MDD (
MECHANICAL- BUILDINGS GSB (Granular Sub
244 maximum dry density) IS 2720 (P-8) RA-2015
MATERIALS Base)
test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 20 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Proctor Density OMC

MECHANICAL- BUILDINGS GSB (Granular Sub
245 (optimum moisture IS 2720 (P-8) RA-2015
MATERIALS Base)
content) Test
MECHANICAL- BUILDINGS GSB (Granular sub
246 Sieve Analysis test MORTH 5th rev sec400
MATERIALS Base)
MECHANICAL- BUILDINGS GSB (Granular Sub
247 Water Absorption test IS 2386 (P-3) RA-2016
MATERIALS Base)
MECHANICAL- BUILDINGS
248 Paver Block Abrasion resistance IS-15658 RA2016
MATERIALS
MECHANICAL- BUILDINGS
249 Paver Block compressive Strength IS 15658 RA-2016
MATERIALS
MECHANICAL- BUILDINGS Dimension (Thickness
250 paver block IS 15658 RA-2016
MATERIALS mm)
MECHANICAL- BUILDINGS
251 paver block Flexural Strength IS 15658 RA-2016
MATERIALS
MECHANICAL- BUILDINGS
252 paver block Water Absorption IS 15658 RA-2016
MATERIALS
MECHANICAL- BUILDINGS steel structura l/
253 Brinell Hardness IS 1500
MATERIALS TMT Bar / GI PIpe
MECHANICAL- BUILDINGS steel structura l/
254 Rockwell Hardness IS 1586
MATERIALS TMT Bar / GI PIpe
MECHANICAL- BUILDINGS steel structura l/
255 Rockwell hardness test IS 1586
MATERIALS TMT Bar / GI PIpe
MECHANICAL- BUILDINGS
256 steel structural Impact Test Charpy IS 1757 RA-1994
MATERIALS
MECHANICAL- BUILDINGS Steel Structural /
257 Yield Stress test IS 1608 RA-2011
MATERIALS TMT Bar / GI Pipe

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 21 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS Steel Structure /TMT

258 Bend test IS 1599 RA-2015
MATERIALS Bar / GI Pipe
MECHANICAL- BUILDINGS Steel Structure /TMT
259 Elongation test IS 1608 RA-2011
MATERIALS Bar / GI Pipe
MECHANICAL- BUILDINGS Steel Structure /TMT
260 Re bend test IS 1786 Ra-2013
MATERIALS Bar / GI Pipe
MECHANICAL- BUILDINGS Steel Structure /TMT
261 Specimen Mass Test IS 1786 Ra-2013
MATERIALS Bar / GI Pipe
MECHANICAL- BUILDINGS Steel Structure /TMT
262 Tensile Strength test IS 1608 RA-2011
MATERIALS Bar / GI Pipe
Stone / Kota /
MECHANICAL- BUILDINGS
263 Granite/ lime, Compressive Strength IS 1121(P-1)
MATERIALS
marble
Stone / Kota /
MECHANICAL- BUILDINGS
264 Granite/ lime, Hardness test IS 13630 (P-13)
MATERIALS
marble
Stone / Kota /
MECHANICAL- BUILDINGS
265 Granite/ lime, Specific Gravity test IS 1122
MATERIALS
marble
Stone / Kota /
MECHANICAL- BUILDINGS
266 Granite/ lime, Water Absorption IS 1124
MATERIALS
marble
MECHANICAL- BUILDINGS
267 Tiles / Ceramic Tiles Breaking Strength IS 13630 (P-6)
MATERIALS
MECHANICAL- BUILDINGS Chemical resistance
268 Tiles / Ceramic Tiles IS 13630 (P-8)
MATERIALS methyl blue test
MECHANICAL- BUILDINGS Chemical Resistance to
269 Tiles / Ceramic Tiles IS 13630 Part-8
MATERIALS House Hold chemical test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 22 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS
270 Tiles / Ceramic Tiles Crazing Resistance test IS 13630 (P-9)
MATERIALS
MECHANICAL- BUILDINGS
271 Tiles / Ceramic Tiles Dimension (Width) IS 13630 (P-1) RA-2017
MATERIALS
MECHANICAL- BUILDINGS
272 Tiles / Ceramic Tiles Dimension (length) IS 13630 (P-1) RA-2017
MATERIALS
MECHANICAL- BUILDINGS
273 Tiles / Ceramic Tiles Dimension Thickness IS 13630 (P-1) RA-2017
MATERIALS
MECHANICAL- BUILDINGS Resistance Thermal
274 Tiles / Ceramic Tiles IS 13630 (P-5)
MATERIALS Expansion
MECHANICAL- BUILDINGS Scratch Hardness
275 Tiles / Ceramic Tiles IS 13630 (P-13)
MATERIALS accordance to MOHS
MECHANICAL- BUILDINGS
276 Tiles / Ceramic Tiles Visible Examination test IS 13630 (P-8)
MATERIALS
MECHANICAL- BUILDINGS
277 Tiles / Ceramic Tiles Water Absorption test IS 13630 (P-2) RA-2017
MATERIALS
MECHANICAL- BUILDINGS WBM (Water Bound
278 Combined FI & EI test IS 2386 (P-1) RA-2016
MATERIALS Macadom)
MECHANICAL- BUILDINGS WBM (Water Bound
279 Impact Value test IS 2386 (P-4) RA-2016
MATERIALS Macadom)
MECHANICAL- BUILDINGS WBM (Water Bound Los Angeles Abrasion
280 IS 2386 (P-4) RA-2016
MATERIALS Macadom) test
MECHANICAL- BUILDINGS WBM (Water Bound
281 Sieve Analysis test MORTH 5th rev400-9-9
MATERIALS Macadom)
MECHANICAL- BUILDINGS WBM (Water Bound
282 Water Absorption test IS 2386 (P-3) RA-2016
MATERIALS Macadom)
MECHANICAL- BUILDINGS WMM (Wet Mix Atterberg's Liquid Limit
283 IS 2720 (P-5) RA-2015
MATERIALS Macadom) test

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 23 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- BUILDINGS WMM (Wet Mix Atterberg's Plastic Limit

284 IS 2720 (P-5) RA-2015
MATERIALS Macadom) test
MECHANICAL- BUILDINGS WMM (Wet Mix
285 Combined FI & EI test IS 2386 (P-1) RA-2016
MATERIALS Macadom)
MECHANICAL- BUILDINGS WMM (Wet Mix
286 Impact Value test IS 2386 (P-4) RS-2016
MATERIALS Macadom)
MECHANICAL- BUILDINGS WMM (Wet Mix Loss Angeles Absorption
287 IS 2386 (P-4) RA-2016
MATERIALS Macadom) test
MECHANICAL- BUILDINGS WMM (Wet Mix MDD (Maximum Dry
288 IS 2720 (P-8) RA-2015
MATERIALS Macadom) Density) test
MECHANICAL- BUILDINGS WMM (Wet Mix OMC ( Optimum Moisture
289 IS 2720 (P-8) RA-2015
MATERIALS Macadom) Content) test
MECHANICAL- BUILDINGS WMM (Wet Mix
290 Sieve Analysis test MORTH 5th rev.
MATERIALS Macadom)
MECHANICAL- BUILDINGS WMM (Wet Mix
291 Water Absorption test IS 2386 (P-3) RA-2016
MATERIALS Macadom)
MECHANICAL- SOIL AND
292 Bentonite liquid limit test IS 2720 (P-5) Ra-2015
ROCK
MECHANICAL- SOIL AND
293 Bentonite Moisture Content test IS 6186
ROCK
MECHANICAL- SOIL AND
294 Bentonite PH test IS 6186
ROCK
MECHANICAL- SOIL AND
295 Bentonite Plastic Limit test IS 2720 (P-5) RA-2015
ROCK
MECHANICAL- SOIL AND
296 Bentonite Sand Content Test IS 6186
ROCK
MECHANICAL- SOIL AND
297 Bentonite Swelling Power test IS 6186
ROCK

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 24 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Proctor density (Light

MECHANICAL- SOIL AND Compaction) OMC
298 Siol or Rock IS 2720 (P-7) RA-2011
ROCK (Optimum Moisture
Content)
Proctor density (Haevy
MECHANICAL- SOIL AND compaction) OMC
299 Siol or Rock IS 2720 (P-8) RA-2015
ROCK (OPtimum Moisture
Content)
Proctor density (Light
MECHANICAL- SOIL AND
300 siol or rock Compaction) MDD IS 2720 (P-7) RA-2011
ROCK
(Maximum Dry Density)
MECHANICAL- SOIL AND
301 soil or rock Atterberg`s Liquid Limit IS 2720 (p-5) RA-2015
ROCK
MECHANICAL- SOIL AND Atterberg's Plastic Limit
302 Soil or Rock IS 2720 P-5 RA-2015
ROCK Test
MECHANICAL- SOIL AND CBR (california Bearing
303 soil or rock IS 2720 (p-16) RA-2015
ROCK Ratio) Soak
MECHANICAL- SOIL AND
304 soil or rock CRB UN-Soak IS 2720 (P-16) RA-2015
ROCK
MECHANICAL- SOIL AND Density by Core- Cutter
305 soil or rock IS 2720 (P-29) RA-1995
ROCK method
MECHANICAL- SOIL AND Density by Sand
306 SOIL OR ROCK IS 2720 (P-28) RA-1995
ROCK Replacement Method
MECHANICAL- SOIL AND Direct shear test (
307 soil or rock IS 2720 (P-13) RA-2016
ROCK Cohesion)
MECHANICAL- SOIL AND
308 Soil or rock Dry Shrinkage Test IS 2720 (P-6)
ROCK
MECHANICAL- SOIL AND
309 soil or rock Free Swell Index IS 2720 (P-40) RA-2011
ROCK

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 25 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Grain Size and

MECHANICAL- SOIL AND
310 soil or rock Hydrometer Analysis (% IS 2720 (P-4) RA-2015
ROCK
of clay)
Grain Size and
MECHANICAL- SOIL AND
311 soil or rock Hydrometer Analysis (% IS 2720 (P-4) RA-2015
ROCK
of Gravel)
Grain Size and
MECHANICAL- SOIL AND
312 soil or rock Hydrometer Analysis (% IS 2720 (P-4) RA-2015
ROCK
of sand)
Grain Size and
MECHANICAL- SOIL AND
313 soil or rock Hydrometer Analysis (% IS 2720 (P-4) RA-2015
ROCK
of silt)
Grain Size and
MECHANICAL- SOIL AND
314 soil or rock Hydrometer Analysis IS 2720 (P-4) RA-2015
ROCK
(75µ sieve)
MECHANICAL- SOIL AND
315 Soil or Rock moisture content test IS 2720 (P-2) RA-2002
ROCK
MECHANICAL- SOIL AND
316 soil or rock Permeability Test IS 2720 (P-17) RA- 2016
ROCK
MECHANICAL- SOIL AND
317 soil or rock PH Value Test IS 2720 (P-26) RA-2011
ROCK
Proctor density (Haevy
MECHANICAL- SOIL AND
318 soil or rock compaction) MMD IS 2720 (P-8) RA-2015
ROCK
(Maximum Dry Density)
MECHANICAL- SOIL AND
319 soil or rock Sand Equivalent Test IS 2720 (P-37)
ROCK
MECHANICAL- SOIL AND
320 soil or rock Specific Gravity IS 2720 (P-3) RA-2001
ROCK

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 26 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

MECHANICAL- SOIL AND Triaxial shear test

321 soil or rock IS 2720 (P-11)
ROCK (Cohesion)
MECHANICAL- WOOD Wood And Wooden
322 Moisture Content Test IS 11215 RA-2010
AND WOOD PRODUCTS Product
MECHANICAL- WOOD Wood And Wooden
323 Dimension (Length) IS 303
AND WOOD PRODUCTS Products
MECHANICAL- WOOD Wood And Wooden
324 Dimension (Width) Test IS 303
AND WOOD PRODUCTS Products
MECHANICAL- WOOD Wood And Wooden
325 Dimension of thickness IS 303
AND WOOD PRODUCTS Products
NON-DESTRUCTIVE-
BUILDING MATERIALS - Reinforced Concrete Ultrasonic Pulse Velocity
326 IS 13311 (P-1) RA 2008
REINFORCED CONCRETE Structure test
STRUCTURES
NON-DESTRUCTIVE-
BUILDING MATERIALS - Reinforced Concrete
327 Concrete Core Test IS 516 RA-2013
REINFORCED CONCRETE Structures
STRUCTURES
NON-DESTRUCTIVE-
BUILDING MATERIALS - Reinforced Concrete
328 Rebound Hammer test IS 133110(P-2)
REINFORCED CONCRETE Structures
STRUCTURES

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 JOHANNES KEPLER TESTING & RESEARCH CENTRE (HICM) PRIVATE LIMITED, DPS MORE,
Laboratory Name :
PRIYDARSHI NAGAR, BAILEY ROAD, DANAPUR CANTT, PATNA, BIHAR, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-8942 Page No 27 of 27
Validity 03/08/2020 to 02/08/2022 Last Amended on -

Component, parameter or Test Method Specification against

Materials or Products characteristic tested / Specific which tests are performed and /
S.No Discipline / Group
tested Test Performed / Tests or type of or the techniques / equipment
tests performed used

Site Facility
MECHANICAL- BUILDINGS Bituminous Core Density
1 Bituminous Concrete MORTH 5th rev
MATERIALS Test

This is annexure to 'Certificate of Accreditation' and does not require any signature.