01 33 23 - Shop Drawings, Product Data, and Samples
01 33 23 - Shop Drawings, Product Data, and Samples
01 33 23 - Shop Drawings, Product Data, and Samples
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Submittal Procedures.
B. Shop Drawings.
C. Product Data.
D. Samples.
E. Design Calculations.
F. Quality Assurance Submittals.
G. Informational Submittals.
H. Other Submittals.
01 33 23 - 1
PART 2 PRODUCTS
2.01 SHOP DRAWINGS
A. Shop Drawings:
1. Documents prepared by contractors, manufacturers, suppliers, or subcontractors to
illustrate details and techniques for a portion of the work
2. Documents prepared to show compliance with the Contract Documents or to show how
specialized work will be incorporated into the project.
3. Not Contract Documents, or standard documentation from the manufacturer
01 33 23 - 2
D. Include the following information on Shop Drawings.
1. Equipment tags.
2. Dimensions, including dimensions established by field measurement.
3. Scale.
4. Identification of products and materials included.
5. Compliance with specified standards.
6. Notation of coordination requirements.
7. Construction sequences and relationships of separate components where necessary
to avoid conflicts in utilization of the space available.
8. Indication of deviation from Contract Documents, reproducible in black and white.
9. Space for Design-Builder’s review and action taken.
01 33 23 - 3
F. Product Data Submittal instructions:
1. Submit as many copies as Design-Builder requires, plus two additional copies for Project
Coordinator.
2. Submit electronic copy of each Product Submittal.
2.03 SAMPLES
A. Samples:
1. Physical examples of materials, finishes, equipment, or workmanship that illustrate
aesthetic and functional characteristics of a material or product and establish standards for
Work to be done.
2. Samples shall be retained as part of the project record documents.
B. Samples include, but are not limited to:
1. Interior Finishes:
(a) Paint chips
(b) Cloth swatches
(c) Finished pieces of woodwork trim
(d) Carpet Samples
(e) Porcelain or ceramic tile samples
(f) Accent finishes and casework
(g) Exposed HVAC elements with custom color finishes
(h) Exposed lighting elements with custom color finishes
2. Exterior Finishes:
(a) Slate Tile, other roofing materials
(b) Brick
(c) Mortar
(d) Limestone
(e) Paints & coatings
(f) Sealant
(g) Glazing
01 33 23 - 4
8. Availability.
9. Delivery time.
F. Samples Submittal Instructions:
1. Submit 2 samples (minimum 1 for Employer) except as noted:
(a) When variation in color, pattern, texture, or other characteristic is inherent in the
material or product represented, submit a Sample size large enough, or submit multiple
Samples necessary, to show approximate limits of the variations
(b) Refer to other Specification Sections for requirements for Samples that illustrate
workmanship, fabrication techniques, assembly details, connections, operation, and
similar construction characteristics
2. Include identification on each sample with full Project information.
G. Maintain Samples, as returned by Project Coordinator, at the Project Site, available for quality-
control comparisons throughout the course of construction activity, except as noted:
1. Refer to other Specification Sections for Samples to be returned to Design-Builder for
incorporation in the Work. Such Samples must be in an undamaged condition at time of
use. Design-Builder to indicate such special requests about disposition of Sample
submittals.
H. Samples not incorporated into the Work or otherwise designated as Employer's property,
are the property of Design-Builder and shall be removed from the site prior to Substantial
Completion.
I. Unless Project Coordinator observes noncompliance with provisions of the Contract
Documents, the submittal may be used to obtain final acceptance and serve as the final
submittal.
01 33 23 - 5
C. Include the following when preparing Quality Assurance Submittals:
1. Project Number and Name.
2. Specification Section Number and Name.
3. Equipment tags.
D. Quality Assurance Submittals Submittal Instructions:
1. Submit as many copies as Design-Builder requires, plus two additional copies for Project
Coordinator.
2. Submit electronic copy of each Quality Assurance Submittal
01 33 23 - 6
D. Other Submittals Submittal Instructions:
1. Submit as many copies as Design-Builder requires, plus two additional copies for Project
Coordinator.
2. Submit electronic copy of each Other Submittal
PART 3 EXECUTION
NOT USED
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
END OF SECTION
01 33 23 - 7