OKi Catalog 2010
OKi Catalog 2010
OKi Catalog 2010
Convection Rework
Fume Extraction
Fluid Dispensing
www.beasuperproducer.com
TAP into OK International and become a SuperProducer
Only at OK International will you find conduction soldering & rework, convection rework,
fume extraction and fluid dispensing products that allow you to TAP into three advantages
over competitive systems.
Training Advantage
Our products require minimal training time, and are easy and comfortable to use.
Application Advantage
We design our products to be multi-functional and flexible to meet every application need.
Productivity Advantage
Our products are proven to improve productivity, yield and your bottom line.
1
Content
Convection Rework 19 - 28
Product Selection 19
MRS-1000 Modular Rework System 20
HCT-1000 Programmable Hand Held Convection Tool 21 - 22
PCT-1000 Programmable Pre-heater 23
ATH-1000 Adjustable Tool Holder and LM-1000 Light Magnifier 24
PCT-100 Focused Convection Pre-heater 25
Board Holders 26
HCT-900 Hand Held Convection Tool 27 - 28
Fume Extraction 29 - 36
Product Selection 29
BVX-100 Benchtop Single User Arm/Plenum System 30
BVX-200 Two Stations Portable Filter Unit 31
MFX-2200 Particle / Gas Fume Extraction Systems 32 - 33
Omniflex and BVX Arms 34
BTX-208 Portable Tip Extraction System 35 - 36
EC1800 Exhaust Cabinet 36
Fluid Dispensing 37 - 44
Product Selection 37
DX-250 Series Digital Dispenser 38
DX-350 Series Digital Dispenser 39
924-DFV Foot Valve Dispenser 40
Dispensing Tips 41 - 42
Dispensing Consumables 43
Accessories 44
Metcal Range 45 - 46
MX-5000 Advanced Soldering & Rework Systems 45
APR Series Advanced Package Rework 46
2
SmartHeat Technology
®
OK International is the only provider of SmartHeat® Soldering Technology. SmartHeat® senses the exact thermal re-
quirement for each solder joint and responds by delivering the precise amount of thermal energy required to create
a reliable connection.
The result is a high degree of control without resorting to higher tip idle temperatures required by conventional heater
process technologies. Consequently, the risk of component and board damage is minimized. This is especially
important with the greater thermal demands required by lead-free applications.
The temperature needs to be manually set and The required solder joint temperature drives the
adjusted to vary the amount of thermal energy heating process, as opposed to the idle tip
applied, the operator can vary the process. temperature setting (as in a conventional iron).
The tip cools as it heats the joint and the heater Operates at lower safer temperatures. Power is
reheats the tip, often overshooting the set temperature. delivered in proportion to the load. SmartHeat®
technology eliminates overshoot.
Conventional soldering systems require calibration.
No calibration required - saves money and
The actual tip temperature can vary widely from set eliminates system down-time.
point, slowing the process and causing thermal damage
and poor solder joint quality.
Self-regulating
Tip Cartridge
Ergonomic
Stored Energy Controller (see below)
Hand-piece
Connector
Heater Coil
Tip
Temperature Sensor
Soldering Tip Heater
Lightweight,
ergonomic
hand-piece.
Short tip-to-grip
for precise control.
PS-900
MFR-1110
MFR-1120
MFR-1140
MFR-1160
MFR-1161 2 2
MFR-2210
MFR-2220
MFR-2240
MFR-2211 2 2
MFR-2222 2 2
MFR-2241
MFR-DSX
MFR-DSI
MFR-SDX
MFR-SDI
OR CONFIGURE YOUR OWN SYSTEM - 3 PLATFORMS ARE AVAILABLE
All OKi Consumables are shared
PS Platform - Single Output - Soldering Only between the 3 product platforms
MFR Single or Dual Simultaneous Output Platform - Soldering and Rework
MFR Dual Switched Output Platform - Soldering and Desoldering
POWER SUPPLIES HAND-PIECES (see page 11) WORKSTANDS (see page 11) CONSUMABLES
PS-PW900 Production Soldering PS-HC3 Tip Hand-Piece OKi TIPS: PHT - SxV - CxV
WS2-NS (black Non Sleeper)
(incl. PS-CA3 coil assembly)
MFR-H2-ST Tip Hand-Piece
MFR-PS1100 Single Output (incl. MFR-CA2 coil assembly) WS1 (black) OKi TIPS: SxV - CxV
Soldering & Rework
or METCAL CARTRIDGES: SSC
MFR-PS2200 Dual Simultaneous MFR-H1-SC Cartridge Hand-Piece OKi CARTRIDGES: SxP - RxP
Output Soldering & Rework
MFR-H4-TW Tweezer Hand-Piece MFR-WSPT (black ) OKi CARTRIDGES: TxP
MFR-PS2X Dual Switched Output
Desoldering with External Air MFR-HSR Cartridge Hand-Piece MFR-WSSR (black Non Sleeper) OKi CARTRIDGES: SxP - RxP
or
MFR-PS2K Dual Switched Output MFR-HDS Desoldering Gun MFR-WSDS (black Non Sleeper) OKi TIPS: DxP
Desoldering with Internal Air Pump
Technical Specifications
Power Supply
Ambient Operating Temperature 10 - 40°C
Maximum Enclosure Temperature 65°C
Input Line Voltage 100 - 240 VAC
Input Line Frequency 50/60 Hz
Power Consumption 90 Watts max.
Output Power 60 Watts max. at 22°C ambient temperature
Output Frequency 450 KHz
Power Cord (3-wire) 183 cm 18/3 SJT
Dimensions W x D x H 80 x 160 x 115 mm (3.1" x 6.3" x 4.5")
4
3
5
1
6
2
ONLY AVAILABLE ON PS-900 SYSTEM AND FOR USE WITH PHT TIPS
PS-CA1 7 Coil Assembly for PHT Soldering Tips ONLY TIPS
PS-HC1 Hand-piece (PS-H3) and Coil Assembly (PS-CA1)
PS-H3 Hand-piece only, NO Coil Assembly
PHT
8
8 See Page 18
Training Advantage
No training: Switch on and Solder
No calibration required either
6
MFR-1100 Series Single Output Soldering & Rework System
6
3
Systems
MFR-H1-SC MFR-H2-ST MFR-H4-TW MFR-H6-SSC WS1 MFR-WSPT WS2
MFR-PS1100 Soldering
Soldering Cartridge Soldering Tip Tweezer SSC Cartridge Soldering Tweezer
Power Supply Hand-piece Hand-piece Hand-piece Hand-piece Workstand Workstand Workstand
Picture Reference 1 2 3 4 5 6
MFR-1110 1 1 1
MFR-1120 1 1 1
MFR-1140 1 1 1
MFR-1160 1 1 1
MFR-1161 1 1 1 1 1
CxV
RxP Blade Tips
Rework Application Advantage
Cartridges Multiple hand-pieces offering
a wide range of applications.
See Pages 15 & 16 See Pages 13 & 14
7
MFR-2200 Series Dual Simultaneous Output Soldering & Rework System
Systems
MFR-PS2200 MFR-H1-SC MFR-H2-ST MFR-H4-TW WS1 MFR-WSPT
Power Supply Soldering Cartridge Soldering Tip Tweezer Universal Soldering Tweezer
Hand-piece Hand-piece Hand-piece Workstand Workstand
Picture Reference 1 2 3
MFR-2210 1 1 1
MFR-2220 1 1 1
MFR-2240 1 1 1
MFR-2211 1 2 2
MFR-2222 1 2 2
MFR-2241 1 1 1 1 1
CxV
RxP Blade Tips
Rework Productivity Advantage
Cartridges
Dual Output System for
increased productivity
See Pages 15 & 16 See Pages 13 & 14
8
MFR-1100 & MFR-2200 Series Soldering & Rework Systems
Technical Specifications
Power Supply MFR-1100 MFR-2200
Ambient Operating Temperature 10 - 40°C (50°F - 104°F) 10 - 40°C (50°F - 104°F)
Maximum Enclosure Temperature 55°C (131°F) 55°C (131°F)
Input Line Voltage 100 - 240 VAC 100 - 240 VAC
Input Line Frequency 50/60 Hz grounded circuit 50/60 Hz grounded circuit
Power Consumption 70 Watts maximum 130 Watts maximum
Output Power 60 Watts at 22°C 60 Watts at 22°C per output (2 outputs)
Output Frequency 450 KHz 450 KHz
Power Cord (3-wire) 183 cm 18/3 SJT 183 cm 18/3 SJT
Dimensions (approx.) W x D x H 90mm (3.5”) x 142mm (5.6”) 170mm (7") x 200mm (8")
x 197mm (7.8”) x 152.5mm (6")
Weight 2.3kg (5.05 lbs) 2.97 kg ( 6.55 lbs)
Surface Resistivity 105-109 Ohms 105-109 Ohms
Certification / Marking cTUVus, CE cTUVus, CE
MFR-SDX / MFR-SDI
Part No. Description
MFR-DSX Desolder System, External Air
MFR-DSI Desolder System, Internal Air Pump
MFR-SDX Solder / Desolder System, External Air
MFR-SDI Solder / Desolder System, Internal Air Pump
Includes:
MFR-HDS Desolder Hand-piece
MFR-WSDS Desolder Workstand
MFR-HSR Soldering and Rework Hand-piece (only for MFR-SDX /-SDI)
MFR-WSSR Soldering Workstand (only for MFR-SDX /-SDI)
MFR-PS2X Switched Two-Port Power Supply, External Air
MFR-PS2K Switched Two-Port Power Supply, Internal Air Pump
Miscellaneous Accessories
AC-BRUSH-P 13 Soft Brass Brush (Pack of 6)
AC-CP2 Cartridge and Tip Removal Pad
AC-FX1 14 Fume Extraction Kit
AC-IK Interlocking / Mounting Kit
MFR-PM70 Power Meter for MFR Series
PS-PM900 Power Meter for PS-900
AC-Y10 Yellow Sponge for WS1 Workstand (Pack of 10)
AC-YS4 Yellow Sponge Round for WS2 Workstand (Pack of 10)
AC-BP Brass Pad (Pack of 10)
Desoldering Accessories
AC-TC-P Desoldering Tip Cleaner (Pack of 12)
AC-SK1 Seal Kit Collection Chamber
15
AC-VL ESD Air Hose
11
MFR-HDCA Desolder Coil Assembly
AC-CC Solder Collection Chamber
AC-DFP Chamber Liner, Filter & Fume
Tips and Cartridges Selection
ce e e
e iece
- pie iec p iec ce
ce -p p d-
ie iec d nd n d- n -pie
d-p d-
p
H an Ha Ha Ha nd
an an ST
C
SC TW Ha
g ing H H - SS - - R S ce
idg
e
rin rk er lde
r
C3 C1 H2 H6
-
H1 H4 HS HD ie
tr e o e ee
z o H H - - -
FR
- - R- nd-p
RANGE Tip ar old ew lad es S- S- FR FR FR FR F
M Ha
C S R B Tw D P P M M M M M
SxV
CxV
PHT
SxP
RxP
SSC
TxP
Furthermore, fixed temperature cartridges and tips can offer better tip life because they can operate at a lower
temperature than conventional technology.
We acknowledge that some of our customers have specific maximum temperature criteria to meet when
choosing a tip/cartridge for a particular application. The table below provides the max heater temperature:
The SxV and CxV tips are for use with the soldering tip hand-pieces of the PS and MFR Platforms and are recommended
for heavy duty applications. Full range available at www.okinternational.com.
0.43"
SFV-CH20 0.59" SFV-CNL14
Conical Long Solder Tip
11.0mm 15.0mm
Chisel Solder Tip
1.4mm (.056")
0.08" 0.056"
2.0mm 2.0mm (.08") 1.4mm
0.06"
SFV-CHB15 SFV-DRH30CP
1.5mm Chisel Bent 30°Solder Tip Drag Soldering Tip Hoof
0.48" 1.5mm (.06") 3.6mm (.14")
12.2mm
SFV-CN05 SFV-DRK50
2.4mm .095"
0.34"
0.51"
13.0mm SFV-CNB05
Conical Bent Solder Tip
1mm
0.039"
0.02"
0.5mm 0.5mm (.02")
SFV-DRK50S
2mm
0.53"
13.6mm
SFV-CNL04 5.0mm (.20")
0.016" Conical Long Solder Tip
0.4mm
0.4mm (.016")
CFV-BL100
0.02" Blade Tip L=10mm (.40”)
0.5mm
CFV-BL250
0.36"
CFV-BL350
Blade Tip L=35mm (1.4”)
CFV-BL400
Blade Tip L=40mm (1.6”)
CFV-BL500
Blade Tip L=50mm (2”)
13 F = FR4 / Glass Fiber, for most standard applications. Two other series also available, just replace F with either T or C.
T = Temperature Sensitive C = Ceramic. Note: CxV tips are only available in F and C Series.
SxV Soldering Tips - EA Series
0.016" 0.61"
0.40mm 15.5mm SFV-CNB04A
Conical Bent Solder Tip
ring tip 0.21" 0.4mm (.0155")
r solde w “EA”
5.4mm
o p u la
ost p he ne
e t a k e n the m nd created t one is
v a h
We ha the industry ing tips. Eac fer and 0.72"
shape
s in ld e r trans new tip
s 18.2mm
SxV so ermal
SFV-CN05A
s o f a l t h , t h e s e 0.016"
serie r optim asy Access
Conical Solder Tip
0.4mm
ered fo E ffordab
le.
engine fe. Offering
0.4mm (.016")
a n d A
li al ieces
um tip onomic handp
maxim are also Ec in g t ip
solder latforms.
s e w ith the ing p 0.71"
a r e for u
R solder 18.0mm
F soon.
SFV-CNL10A
s M
ries tip S and ailable
SxV se n both the P v 0.04" Conical Long Solder Tip
b e a e 1.0mm
o nd will entativ
here, a ional repres
1.0mm (.04")
o w n
are sh ternat y and
e s e n ew tips t your OK In n, availabilit
Th conta c rmatio s.
Please r further info tion sample 0.48"
f o e v a lu a 0.137" 12.2mm
SFV-DRH420A
3.47mm Hoof Solder Tip
0.079" 2mm
3.47mm (.137")
.719"
2mm
18.3mm
0.079"
SFV-CH24A
0.094"
2.4mm Chisel Solder Tip
2.4mm (.094")
SFV-CH50A
.461"
11.7mm
14
Two other series also available, just replace F with either T or C.
T = Temperature Sensitive C = Ceramic
SxP Soldering Cartridges
The SxP cartridges are for use with the soldering cartridge hand-piece of the MFR Single and Dual Platform. They provide a wide
range of options addressing specialized soldering and rework applications. Full range available at www.okinternational.com.
0.34"
SFP-CN04 .632" SFP-CHL20
Chisel Soldering Cartridge 60°
8.6mm
Conical Cartridge 0.4mm (.016")
16.04mm
0.016"
0.08"
Long Reach 2.0mm (.08")
0.4mm
2.0mm
0.016"
3.0mm
0.4mm
0.4mm (.016") 0.43" 3.0mm (.12")
11.0mm
SFP-CH35
.579"
SFP-CNB05
14.7mm
Chisel Cartridge 30°
0.14"
3.5mm (.14")
0.02"
0.5mm (.02")
0.5mm 0.43"
11.0mm
0.6"
15.21mm
SFP-DRH05 0.3"
7.6mm SFP-CH50
0.02"
0.5mm
Drag Soldering Cartridge Hoof 0.2" Chisel Cartridge 30°
0.5mm (.02") 5.0mm (.20")
5mm
SFP-DRH610
Drag Soldering Cartridge Hoof
0.56"
14.22mm SFP-BVL10
.039"
0.04"
Bevel Cartridge 60° 1.0mm (.04")
1.0mm
1.0mm
1.0mm (.04")
.45"
11.6 mm
0.36"
SFP-CH10
.06"
SFP-DRH615
1.5mm
9.2mm
Chisel Cartridge 30°
Drag Soldering Cartridge Hoof
0.04"
1mm
1.0mm (.04")
60° 1.5mm (.06")
0.39"
10mm SFP-CH15
Chisel Cartridge 30°
.46"
0.06"
11.6mm
1.5mm (.06")
1.5mm
SFP-DRH35
0.14"
Drag Soldering Cartridge Hoof
SFP-CHB15 3.5mm
0.474" .70" 3.5mm (.14")
0.06"
12.04mm
Chisel Cartridge 30° Bent 17.78mm
1.5mm
1.5mm (.06")
SFP-DRK50
0.2"
5.0mm Drag Soldering Cartridge
0.4"
10.0mm
SFP-CH20 0.63"
16mm
5.0mm (.20")
0.08" Chisel Cartridge 30°
2.0mm 2.0mm (.08")
15 F= FR4 / Glass Fiber, for most standard applications. Two other series are also available,
just replace F with either T or C. T = Temperature Sensitive, C = Ceramic
RxP Rework Cartridges
The RxP cartridges are for use with the soldering cartridge hand-piece of the MFR Single and Dual Platform.
Full range available at www.okinternational.com.
Blade cartridges are designed to allow effective and Tunnel cartridges are used for the removal of multi-lead,
quick cleaning of PCB pads. two-sided components such as SOICs, SOJs and TSOPs.
RFP-DL1
Tunnel Cartridge
.36" .17"
RFP-BL1
.127"
SOIC-14-16
9.14mm 4.32mm
3.22mm
RFP-DL2
Tunnel Cartridge
.41"
10.4mm .17"
SOIC-8
.09" 4.32mm
2.29mm
.204"
5.18mm Length 4.32mm (0.17")
RFP-DL3
.36"
9.14mm
RFP-BL3
.02"
Blade Cartridge
0.5mm
.87"
Length 22.1mm (0.87")
22.1mm
RFP-SL1
.20"
5.07mm
.092"
2.34mm
B= 1.37mm (0.054")
RFP-SL2
.20"
.137"
3.48mm
B= 1.63mm (0.064")
B2 D
A A2
Dimensions in mm (")
Part No. SMT TYPE A2 A B2 B D
RFP-QD4 PLCC 32 11.43 (.450) 12.70 (.500) 13.97 (.550) 15.24 (.600) 3.81 (.150)
RFP-QD6 PLCC 44 16.76 (.660) 17.78 (.700) 16.76 (.660) 17.78 (.700) 3.81 (.150)
RFP-QD7 PLCC 68 24.38 (.960) 25.27 (.995) 24.38 (.960) 25.27 (.995) 5.59 (.220)
RFP-QD10 PLCC 52 19.30 (.760) 20.32 (.800) 19.30 (.760) 20.32 (.800) 3.81 (.150)
RFP-QD15 TQFP 80 12.32 (.485) 13.34 (.525) 12.32 (.485) 13.34 (.525) 2.79 (.110)
RFP-QD19 QFP 44 16.13 (.635) 16.13 (.635) 16.13 (.635) 16.13 (.635) 3.30 (.130)
RFP-QD20 QFP 100 16.51 (.650) 16.51 (.650) 22.48 (.885) 22.48 (.885) 3.30 (.130)
16
F = FR4 / Glass Fiber, for most standard applications. Two other series are also available, just replace F with either T or C.
T = Temperature Sensitive, C = Ceramic. Note: RxP tips are only available in F and C Series.
TxP Tweezer Cartridges
For use on MFR Single and Dual Platforms
TFP-BLP1
Tweezer Cartridge TFP-CNP1
.55"
Tweezer Cartridge
.03" 14mm
Blade Pair
0.76mm .75"
Conical Pair
19.1mm
1.0mm (.04")
.015"
0.4mm (.015")
.38mm
.04"
1.0mm
Tweezer Cartridge
.03"
Blade Pair
TFP-BLH60 - A= 20.5mm (.81")
0.028"
2.0mm (.08")
.079"
0.57mm
2.0mm
F= FR4 / Glass Fiber, for most standard applications. Two other series are also available, just replace F with either T or C.
T = Temperature Sensitive, C = Ceramic
REGULAR
LONG REACH
SSC-736A SSC-722A
.39" .45"
SSC-737A .02"
SSC-726A
Chisel 30°
.40"
1.78mm (.07")
0.51mm
1.78mm .45"
11.4mm 0.51mm (.02")
SSC-738A SSC-773A
.64"
.40"
Chisel 30°
10mm
.06"
6.1mm (.24")
0.5mm
1.50mm (.06")
.18" 45º
4.5mm
1.5mm
.24"
6.1mm
SSC-725A SSC-701A
Chisel 30°
.43" .60"
Conical Sharp
.04" 11mm .04" 15.2mm
7= 700 Series for most standard applications. 6= 600 Series and 5= 500 Series also available for temperature sensitive applications.
To order these series, replace 7 with either 6 or 5 except * (not available in 500 Series)
The PHT tips are specifically offered to provide a solution for light load and fine access applications using the PS-900
and the PS-CA1 coil assembly.
PHT-752017 PHT-750335
.394"
.59" .07" 10.0mm
PHT-752035 PHT-751355
.394"
Conical Fine
.39" .10" 10.0mm
Chisel 30°
.02" 10.0mm
15.0mm
PHT-753035 PHT-754487F
Hoof 45° Face Only
45˚
Conical 30°
3.0mm
0.5mm 0.59"
PHT-750315
15.0mm
PHT-755437
.394" .59"
"
.04"
1.0mm
PHT-753077 PHT-754497
Power Conical Hoof 45°
4.0mm 45˚
.04"
1.0mm (.04") .16" 17.0mm
.67"
4.0mm (.16")
16.65mm
.656"
PHT-750325
18
Chisel 60° 75 = 750 Series for most standard applications.
.394"
1.5mm (.06")
.06"
MRS-1000
HCT-1000
PCT-1000
PCT-100-11
PCT-100-21
PCT-101-11
PCT-101-21
PCT-102-11
PCT-102-21
PCT-103-11
PCT-103-21
HCT-900-11
HCT-900-21
Technical Specifications
Size 229 x 178 x 152mm (9" x 7" x 6 ")
Weight 5.4kg (12 lbs.)
Rated Power 600 W
Input Voltage 100-240 VAC, 50/60 Hz
Storage 0°C to 50°C Temperature
(32°F to 122°F)
Air Flow 5-25 l/minute
Temperature Range Up to 450°C (840°F)
Vacuum Pump 15" Hg (381mm Hg)
Noise Level <55 dB
21
HCT-1000 Programmable Hand Held Convection Tool
HN Series Nozzles
A series of 14 Nozzles are available for use with the MRS-1000 /
HCT-1000. The nozzles fit applications reworking components of
all sizes from (including, but not limited to) BGAs, QFPs, LGAs,
PLCC and SOIC. A custom nozzle program is also available.
7
8
22
PCT-1000 Programmable Pre-heater
temperatures
Used in a variety of processes including
soldering, desoldering, SMD rework
Provides faster production rates while lowering
overall process temperatures.
2 modes: manual for constant heater temperature
3
2
* As part of the MRS-1000, the ATH-1000 is attached to the back of the PCT-1000,
see page 23. The ATH-BASE can be ordered separately when the ATH-1000 is used
as a stand-alone unit.
2
Technical Specifications
24
Weight 2.9kg (6.5 lbs)
Magnification 4x
Lighting 8 LEDs, white
Power 24V DC
PCT-100 Focused Convection Pre-heater
Technical Specifications
Input Voltage 115 V (PCT-100-11)
230 V (PCT-100-21)
Heater Rating 450 W
Storage Temperature -10°C—60°C
(14°F—140°F)
3 Environmental Temperature 0°C—40°C
(32°F—104°F)
Air Flow 0.2 CFM (280 l/min)
Control Temperature Variable up to 300°C
(572°F)
Surface Resistivity ESD 106Ω - 1011Ω
Dimensions (L x W x H) 205 x 155 x 65 mm
(8" x 6.1" x 2.6")
4
Weight 1.6 kg (3.5 lbs)
Certificate/Approvals cTUVus, CE
25
See more Board Holders on pages 24 and 26
Board Holders for PCT-1000 & PCT-100 Pre-heaters
BH-100 Board Holder. Recommended for use with the PCT-100 Pre-heater
BH-1000 Post-Rail Board Holder. Includes: 4 posts, 2 rails with sliding clips, 4 support pins and flat-head support
BH-PK1000 Board Holder Pin Kit. Includes: 2 discs,2 long pins, 2 short pins
26
ATH-1000(A or B) + ATH-BASE ATH-1000(A or B) + PCT-1000
A = Advanced Head - B = Basic Head
HCT-900 Hand Held Convection Tool
Part No. Description The HCT-900 can be used for the removal and refitting
of electronic components, including lead-free, from 0201
HCT-900-11 115V Hand Held Convection Tool up to 304 pin QFP.
HCT-HE-11 Heating Element, Replacement, 115V
HCT-900-21 230V Hand Held Convection Tool
HCT-HE-21 Heating Element, Replacement, 230V
27
HCT-900 Hand Held Convection Tool
Nozzle Selection
The HCT-900 is supplied with a standard single jet H-D50 (0.2", 5.0mm) nozzle.
In addition, two rework nozzle kits, predefined for specific applications, are
available, as well as a full selection of nozzles.
NZKT-1 Nozzle Kit for Chip Resistors, SOIC & TSOP Packages. Includes (one each):
• H-D25 • H-SL16 • H-SL28
Nozzle Kit for PLCC, QFP & BQFP packages. Includes (one each):
• H-SOJ40 • H-TS48
NZKT-2
• H-P20 • H-P44 • H-P84
• H-Q1420 • H-Q2626
Technical Specifications
Input Line Voltage 230 V HCT-900-21 / 115V HCT-900-11
Power 320 W
Air Pump Type Diaphragm
Air Flow 6-25 l/min
Control Temperature 100ºC - 500ºC (212ºF - 932ºF)
Dimensions (L x W x H) 210 x 170 x 140 mm (8.7" x 6.7" x 5.5")
Noise Level Less than 46 dBA
Surface Resistivity Unit: 105Ω - 106Ω. Hand-piece & tube: 107Ω - 1011Ω 28
Weight 4.7Kg (10.4 lbs)
Certification / Approvals cTUVus, CE
Fume Extraction Product Selection
p * tor
tion chto on tion ica et
trac
tion r ser
s
Ben ncti rms trac t ion k Ind it abin
Ex ac Us
e
eU e/ Fu ms xA Ex tra
c
loc Un nit tC
tr l Ar ifle log
U s
me Ex le ipl tab um le Ex rB tal au
SYSTEMS Vo
lu
Tip Si
ng
Mu
lt
Po
r
Pl
en BV
X
Om
n
Pa
rtic
Ga
s
Fil
te
An
a
Di
gi Ex
h
BVX-101
BVX-103
BVX-201-KIT
BVX-201-KIT1
BVX-201
BVX-203
BTX-208
MFX-2200C-A
MFX-2200C-D
MFX-2206C-A
MFX-2206C-D
MFX-2200G-A
MFX-2200G-D
MFX-2206G-A
MFX-2206G-D
EC-1800
* all particle filter units are inclusive of a thin gas filter.
Filters
FG-BVX Deep Bed Gas Filter
FM-BVX Main Filter (Combined HEPA/Gas)
FP-BVX Pre-Filter (Pack of 5)
Accessories
BVX-ADT Replacement Arm-To-Plenum Adaptor
BVX-IADT Inverted Arm Adaptor, ESD Safe
BVX-BCK Under Bench Mounting Bracket
BVX-CH01 Connection hose, 50mm (2") diameter, 1.8m (6') long
BVX-TB01 Table bracket with 2 C-clamps
Technical Specifications
Static Pressure (suction force) 1250 Pa (5"WC)
Fan Capacity 110m3/h (65 cfm)
Flow Rate (with filter) 85m3/h (50 cfm)
Air Inlets/Number of Stations 1
HEPA Efficiency 99.97% at 0.3 micron
Noise Level < 55 db A
Dimensions (W x D x H) 300mm x 230mm x 290mm
(11.8" x 9.1" x 11.4")
Weight 9kg (20lbs)
Voltage 100-240 VAC
Frequency 50-60 Hz
Power 85 watt
Certification UL, CSA, CE
30
BVX-200 Two Stations Portable Filter Unit
Filters
FP-BVX200 Pre-Filter (Pack of 5)
FM-BVX200 Main Filter HEPA Carbon
FG-BVX200 Deep Bed Gas Filter
Accessories
BVX-ARM-K1 1 BVX-ARM 760mm (30") long with 1.8m (6') long hose and
table bracket with C-clamps
BVX-ARM-K2 1 BVX-ARM 760mm (30") long and table bracket with C-clamps
BVX-ARM Arm flexible ESD safe, 760mm (30") long
BVX-ARML Arm flexible ESD safe, 1.5m (59") long with arm clip
BVX-TB01 Table bracket with 2 C-clamps
BVX-CH01 Connection hose, 50mm (2") diameter, 1.8m (6') long
BVX-CH02 Connection hose, 50mm (2") diameter, 3.6m (12') long
RPS-1 Remote power switch
Technical Specifications
Static Pressure (suction force) 850 Pa (3.5"WC)
Fan Capacity 250m3/h (150 cfm)
Flow Rate (with filter) 2 x 75m3/h (45 cfm)
Air Inlets/Number of Stations 2
HEPA Efficiency 99.97% at 0.3 micron
Noise Level < 55 db A
Dimensions (W x D x H) 508mm x 254mm x 388mm
(20" x 10" x 15.3")
Weight 9kg (20lbs)
Voltage 100-240 VAC
Frequency 50-60 Hz
Power 85 watt
31 Certification UL, CSA, CE
Max duct run 3.6 m (12')
MFX-2200C Particle Fume Extraction System
Filters
FIL22P030 Prefilter Pleated 60% Efficiency (Pack of 2)
FIL22H070 Combination Filter HEPA/Carbon
Accessories
AC2204 Top cover with 2 air inlets Ø100mm (4") and 2 air inlets Ø
63mm (2.5")
Technical Specifications
Controls and Filter Monitor
110V Units 230V Units
Unit On/Off Switch
Air Inlet Openings 4 x Ø2.5" 4 x Ø63mm
with power indicator Fan Capacity 600 cfm 900m3/h
Thermal overload Flow Rate 400 cfm 600m3/h
protection HEPA Efficiency 99.97% at 0.3 micron 99.97% at 0.3 micron
Analog models with
filter status gauge Static Pressure 4.5" WC Max 1075 Pa
Digital models Power Supply 100-120VAC, 60Hz 220-240VAC, 50Hz
with filter status Power 400 Watt 400 Watt
indicator lights and
Noise Level 58 dbA 58 dbA
other control options
Dimensions (W x D x H) 17.7" x 20.7" x 26.4" 450 x 525 x 670mm
Weight 93 lbs 43 Kg
Certification UL, CSA CE
32
Max duct run 100' 30 m
MFX-2200G Gas Fume Filtration System
Filters
FIL22P040 Prefilter Pleated 85% Efficiency
FIL22G010 Gas Filter Cartridge 11kg (25lbs)
FIL22G020 Carbon Refill Kit 11kg (25lbs)
Accessories
AC2202 Top cover with 4 air inlets Ø 63mm (2.5")
Technical Specifications
110V Units 230V Units
PleatedPre-Filter
Pre-Filter Air Inlet Openings 2xØ4" & 2xØ2.5" 2xØ100mm & 2xØ63mm
Fan Capacity 600 cfm 900m3/h
Pleated
34
AC2025 7 Y-Piece for Ø63mm (2.5") hose with clamps
BTX-208 Portable Tip Extraction Unit
CONNECTION KITS:
BTX-CK2-25 Connection Kit for 2-4 stations with 2.5m (8') Long Hose
BTX-CK4-50 Connection Kit for 4-8 stations with 5m (16') Long Hose
BTX-CK4-75 Connection Kit for 4-8 stations with 7.5m (25') Long Hose
Individual Parts
CH0121 1 Flexible Hose ∅35mm x 2.5m (8') Long
CH0122 1 Flexible Hose ∅35mm x 5m (16') Long
CH0123 1 Flexible Hose ∅35mm x 7.5m (25') Long
AC-TX001-4 2 Couplings with 2 Glands 5.6mm (pack of 4)
18566S-5 3 End Plug (Pack of 5)
AC-TX002-2 4 T-Piece Connector (pack of 2)
19115S-10 5 Pipe Clip (pack of 10)
4 3
Technical Specifications
Max. number of stations 8
Flow Rate per station >28 l/min
Noise Level < 55 db A
Dimensions (W x D x H) 508mm x 254mm x 388mm
(20" x 10" x 15.3")
Weight 9kg (20lbs)
Voltage 100-240 VAC
Frequency 50-60 Hz
Power 85 Watt
Max Duct Run 30m (100')
Certification UL/CSA/CE
36
Product Selection
ub
s i i u m la ckH
0p ps cu er nu Lo
10 15 Va en
s a sh er
re lC ru
o o & u le Di
sp m ips tee
B tic Lu
0t 0t er ss l ab ac
uu gT lix Pl
as eli
x
se
r
se
r
Tim Pr
e ica mm lve
sin sS He H
en en tal tal om ra Va gV en les ble ibl
e le er
ed
SYSTEMS Di
sp
Di
sp Di
gi
Di
gi
E co
n
P ro
g
Foo
t
Ana
lo
Disp Stai
n
Do
u
Fle
x
D ou
b
Ta
p
DX-250
DX-255
DX-350
DX-355
924-DFV
924-DFV-VAC
TE Series
BT Series
TS-P Series
TT Series
Technical Specifications
Technical Specifications
39
Certification CE, TUV-GS, NRTL
Warranty 1 year
924-DFV Series Foot Valve Dispenser
The 924-DFV is the ideal basic dispensing unit for most general
applications of adhesives, sealants, coatings and compounds.
The 924-DFV-VAC features a vacuum suck-back to prevent
very thin materials from dripping to reduce tailing or stringing
with thicker materials.
Technical Specifications
40
Dispensing Tips
TE Tips Series
Stainless-steel cannula with a double Helix polypropylene hub
Burr-free and electro-polished cannula for unobstructed and
consistent material flow
Silicone and chloride free
Sold in packs of 50
41
25 Red 0.010 0.254
27 Clear 0.008 0.203
30 Lavender 0.006 0.152
32 Yellow 0.004 0.102
Dispensing Tips
BT Series
Double Helix Brush Tips for "spread" applications such as glues
and other materials.
Soft brush is made of Red Sable
Stiff brush is made of Nylon
Available in packs of 12.
TT Series Tips
Molded in high density polyethylene with UV light block additive
Include a double Helix luer lock hub
Tapered tip prevents blockage and increases the flow of high
viscosity materials
Sold in packs of 50
42
900-NK Dispensing Tip Kit
Dispensing Consumables
End Caps
Designed to seal large end of the syringe barrel
Ensure no contaminants come in contact with material during storage
Made from polyethylene
Available in packs of 50
Syringe barrels
Unique ultra-low draft of inner diameter yield high accuracy and stability
Industry compliant silicone / chloride free, low friction polypropylene
3 colours: Natural for most generic applications, Amber for protection
of UV/visible light block (up to 520nm), Black for total light block
Sold in packs of 50
Tip Cap
Use to seal syringe barrel when not in use
Fits all syringe sizes
Made from polypropylene
Sold in packs of 50
900-ORTC Tip Care Double Helix Thread Orange
900-BTC Tip Care Double Helix Thread Black
Vacuum Pencil
Use for pick and place function
Stand-alone vacuum pick-up requires shop air
Optional Mixed Kit of Vacuum Cups also available
Syringe Holder
Use for 900 Series syringes
44
Metcal MX-5000 Soldering, Desoldering and Rework Systems
More power: With nearly double the power of its predecessor, the
MX-5000 time-to-recovery increases production rates and throughput.
Built-in power indication meter with digital display and bar graph that
dynamically provides the operator with feedback on the status of the
soldering operation.
The four hand-pieces available for the MX-5000 will make the task at
hand seem effortless.
www.youtube.com/user/metcalman
45
Metcal APR-5000 Precision Advanced Package Rework Systems
46
BRO-OKI-09
Rev 1 - July 10
www.okinternational.com