Manual HP Smart Tank 515
Manual HP Smart Tank 515
Manual HP Smart Tank 515
ALL RIGHTS RESERVED. REPRODUCTION, ADAPTATION, OR TRANSLATION OF THIS MATERIAL IS PROHIBITED WITHOUT PRIOR WRITTEN PERMISSION OF HP,
EXCEPT AS ALLOWED UNDER THE COPYRIGHT LAWS. THE ONLY WARRANTIES FOR HP PRODUCTS AND SERVICES ARE SET FORTH IN THE EXPRESS
WARRANTY STATEMENTS ACCOMPANYING SUCH PRODUCTS AND SERVICES. NOTHING HEREIN SHOULD BE CONSTRUED AS CONSTITUTING AN ADDITIONAL
WARRANTY. HP SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Mac, OS X, macOS, and AirPrint are trademarks of Apple Inc., registered in the U.S. and other countries.
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Table of contents
2 Print .......................................................................................................................................................................................................... 22
Load media .............................................................................................................................................................................. 23
Print documents ..................................................................................................................................................................... 27
Print photos ............................................................................................................................................................................ 28
Print envelopes ....................................................................................................................................................................... 29
Print using the HP Smart app ............................................................................................................................................... 30
Print using the maximum dpi ............................................................................................................................................... 31
Print using a Mac desktop or laptop .................................................................................................................................... 32
Print with mobile devices ...................................................................................................................................................... 33
Tips for print success ............................................................................................................................................................. 34
View print job status and manage print jobs (Windows) ................................................................................................. 36
Customize your printer (Windows) ...................................................................................................................................... 37
ENWW iii
Remove Web Services ........................................................................................................................................................... 43
6 Connect .................................................................................................................................................................................................... 68
Before you begin .................................................................................................................................................................... 69
To place the printer in setup mode ..................................................................................................................................... 70
Connect your printer to a wireless network with a router ............................................................................................... 71
Connect wirelessly to the printer without a router (Wi-Fi Direct) ................................................................................... 73
Connect your printer by using the HP Smart app ............................................................................................................. 76
Change wireless settings ...................................................................................................................................................... 77
Connect your printer to your computer with a USB cable (non-network connection) ................................................ 78
Change from a USB connection to a wireless network .................................................................................................... 79
Use advanced printer management tools (for networked printers) .............................................................................. 80
Tips for setting up and using a networked printer ........................................................................................................... 82
iv ENWW
Cartridge problem .................................................................................................................................................................. 94
Printing issues ...................................................................................................................................................................... 101
Copy issues ........................................................................................................................................................................... 105
Scan issues ........................................................................................................................................................................... 106
Network and connection issues ........................................................................................................................................ 107
Printer hardware issues ...................................................................................................................................................... 109
Solve problems using Web Services ................................................................................................................................. 110
Restore original factory defaults and settings ................................................................................................................ 111
Maintain the printer ............................................................................................................................................................. 112
HP support ............................................................................................................................................................................ 114
ENWW v
vi ENWW
1 Get started
● Printer parts
● Paper basics
● Sleep mode
● Quiet Mode
● Auto-Off
ENWW 1
Printer parts
1 Paper-width guide
2 Input tray
4 Scanner lid
5 Scanner glass
7 Front door
8 Ink tank
10 Output tray
12 Control panel
14 Printhead latch
15 USB port
16 Power connection
Printheads The printheads are the components in the print mechanism that apply ink to the paper. There are two
printheads: a black ink printhead and a color ink printhead.
CAUTION: After you have set up the printer, do not open the printhead latch unless instructed to do so.
Printhead latch The printhead latch on the carriage secures the printheads in the carriage. Make sure the printhead latch is
properly closed to avoid problems such as carriage jams.
CAUTION: After you have set up the printer, do not open the printhead latch unless instructed to do so.
Ink tanks There are four ink tanks. Each ink tank corresponds to an individual color: cyan, magenta, yellow and, black.
Ink tank caps Ink tank caps are plugs that seal each ink tank.
For more information about alignment, see Printhead Alignment icon on page 10.
Feature Description
2 Resume button: Resumes a job after a disruption (for example, after loading paper or clearing a paper jam).
3 Color Copy button: Starts a color copy job. To increase the number counter, press and hold the button. Copying
starts two seconds after the last button press.
4 Black Copy button: Starts a black-and-white copy job. To increase the number counter, press and hold the
button. Copying starts two seconds after the last button press.
7 Control Panel Display: Indicates number counter, paper related issues, printhead problems, ink tank issues, Wi-
Fi Direct status, wireless status, and signal strength.
Wireless light: Indicates whether the printer is connected to a wireless network. A blinking Wireless light
indicates that the printer is not connected to a network or is trying to connect. During setup, it also indicates
the printer is in setup mode.
NOTE: If more than two hours have passed since you first turned on the printer and you have not set up the
printer wirelessly, you can place the printer in network setup mode by restoring the printer network settings.
The setup mode will last for two hours. For information on how to restore the printer network settings, see
Restore original factory defaults and settings on page 111.
9 Information button: Press this button to print an information page. The page provides information on the
printer, the printer email address, Wi-Fi Direct, network connection, and mobile printing.
Icon Description
Number Counter icon: Shows the number counter when you are copying documents, changes to the letter
A when the printer is doing printhead alignment, and shows the letter E and a number when the printer is
in an error state.
The CMYK icons and Ink icons are used to indicate status of the four ink tanks in the printer.
Each set of icons corresponds to an ink tank: cyan, magenta, yellow and, black.
Printhead icons: The left printhead icon flashing shows an error related to the tri-color printhead, and the
right icon flashing shows an error related to the black printhead.
The wireless status icons consist of three icons: (the Wireless icon), (the Wireless Attention icon),
and (the Signal Bars icon)
Status Description
Blinking The printer is processing a job. To cancel the job, press (the Cancel button).
Fast blinking If the printhead access door is open, close it. If the printhead access door is closed and the light is
blinking fast, the printer is in an error state that you can resolve by following the on-screen messages
from the computer. If you do not see any on-screen messages, try printing a document to generate an
on-screen message.
The Wireless light and Wireless status icons will only light up after alignment is completed during initial setup.
Status Description
The Wireless light, the Wireless icon, and the Signal Bars icon are The printer is connected to a wireless network.
on.
The Wireless light is off. The wireless capability of the printer is off. To turn on the wireless
capability, press (the Wireless button).
The Wireless light is blinking, the Wireless icon is on, and the Signal The printer is in Auto-wireless connect (AWC) mode.
Bars icon are cycling.
The Wireless light blinks for three seconds and then turns off. The wireless capability of the printer is disabled.
The Wireless light is blinking, and the Wireless icon and Wireless There is no wireless signal.
Attention icon are on.
● Make sure your wireless router or access point is powered on.
The Wireless light is blinking, the Wireless icon is on, and the One of the following might have occurred.
Wireless Attention icon is blinking.
● The printer has a problem connecting to the wireless network.
The Wireless light is blinking, the Wireless icon is on, and the Signal The printer is in the Wi-Fi Protected Setup (WPS) push mode.
Bars are blinking together.
The Wireless light is blinking, and the Wireless icon is on. The wireless capability of the printer is on, but has not been
configured.
The Wireless light is blinking, the Wireless icon is on, the Signal Bars The wireless capability of the printer is on and has been configured
are cycling, and the Wireless Attention light is on. before, and the printer is trying to connect to the network.
The Wi-Fi Direct icon is on. Wi-Fi Direct is turned on and ready to use.
Cause Solution
One of the following might have occurred. – Make sure both printheads are properly installed.
– The corresponding printhead is installed incorrectly. – If both printheads are installed, remove the printhead
indicated, make sure there is no orange plug or plastic
– The corresponding printhead still has an orange plug or tape on it, and then reinsert the printhead securely.
plastic tape on it.
– Make sure that you are using the correct HP printheads for
– The corresponding printhead is incompatible or damaged. your printer.
● The Alert icon, both Printhead icons, and the Ink/Printhead light are blinking.
One of the following might have occurred. – Make sure both printheads are properly installed.
– One or both printheads are installed incorrectly. – If both printheads are installed, remove the printheads,
make sure there is no orange plug or plastic tape on them,
– One or both printheads still have an orange plug or plastic and then reinsert the printheads securely.
tape on them.
– Make sure that you are using the correct HP printheads for
– One or both printheads are incompatible or damaged. your printer.
Cause Solution
The printer is doing printhead alignment. Once the alignment page is printed, place the printed page print-
side down on the scanner glass, and then press one of the copy
A blinking "A" appears when the alignment page is being printed buttons on the control panel to scan the page.
or scanned.
Printhead alignment is complete after the scan.
It stops blinking after the page is printed or scanned.
NOTE: To learn how to load an original, see Load original
"A" disappears after the scan when printhead alignment is on page 46.
complete.
● The Number Counter icon shows a blinking A. The Alert icon, Resume light, and Power light are blinking.
Cause Solution
Printhead alignment failed. This occurs after you have scanned Try one of the following:
the alignment page.
– Press (the Resume button) to reprint the alignment
page.
Cause Solution
There is no paper in the input tray. Load paper in the input tray.
● The Alert icon, the Paper Error icon, and the Resume light are blinking.
Cause Solution
The printer receives a printing job, and detects that there is no Load paper, and then press (the Resume button) to continue
paper in the input tray.
printing.
Cause Solution
Paper width mismatch (E1) or Paper length mismatch (E2) has 1. Press (the Cancel button) to cancel printing.
occurred. When printing, the printer detects that the paper size
of the printing job does not match the width or length of the
2. Load paper that matches the size of the page you want to
paper loaded.
print, or change the paper size settings in your application
to match the size of the paper you are using.
● The Number Counter icon is showing E3. At the same time, the Ink/Printhead light, and the Resume light
are blinking.
The carriage inside the printer has stalled. 1. Open the front door, then the printhead access door.
● The Number Counter icon is showing E4, and the Resume light is blinking.
Cause Solution
There is a paper jam. Clear the jam, and then press (the Resume button) to
continue printing.
Cause Solution
The scanner is not working. Turn the printer off, and then on again.
If the problem persists, contact HP. The printer still prints even if
the scanner is not working.
3. Wait a minute, and then plug the power cord back in.
Cause Solution
Ink tank is low on ink. Refill the indicated ink tank that is low on ink.
● The CMYK icons are on, and one or more Ink icons are blinking. The Ink/Printhead light is on.
Cause Solution
Ink tank is very low on ink. Refill the indicated ink tank that is very low on ink.
● The Number Counter icon shows E7. The CMYK icons are on. The Ink/Printhead light, one or more Ink icons,
and the Alert icon are blinking.
Cause Solution
Ink tank is out of ink. Refill the indicated ink tank that is out of ink.
To change the default paper settings from the embedded web server
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. From the left menu, click Preferences, click Tray and Paper Management, and then make the necessary
changes.
4. Click Apply.
HP recommends plain papers with the ColorLok logo for printing everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of reliability
and print quality, and produce documents with crisp, vivid color, bolder blacks, and that dry
faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of
weights and sizes from major paper manufacturers.
Photo printing
HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With HP Premium
Plus Photo Paper, you can print beautiful photos that are instant-dry so you can share them right off the
printer. It is available in several sizes, including A4, 8.5 x 11 inches, 4 x 6 inches (10 x 15 cm), 5 x 7 inches
(13 x 18 cm), and in two finishes - glossy or soft gloss (semi-gloss). Ideal for framing, displaying, or gifting
your best photos and special photo projects. HP Premium Plus Photo Paper delivers exceptional results
with professional quality and durability.
This glossy photo paper features an instant-dry finish for easy handling without smudging. It resists water,
smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-processed
photo. It is available in several sizes, including A4, 8.5 x 11 inches, 10 x 15 cm (4 x 6 inches), 13 x 18 cm (5
x 7 inches). It is acid-free for longer lasting documents.
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This
affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper
with any inkjet printer. It is available in glossy finish in several sizes, including A4, 8.5 x 11 inches, 5 x 7
inches, and 4 x 6 inches (10 x 15 cm). It is acid-free for longer lasting documents.
HP Photo Value Packs conveniently package original HP ink cartridges and HP Advanced Photo Paper to
save you time and take the guesswork out of printing affordable, lab-quality photos with your HP printer.
Business documents
This paper is a heavy two-sided matte paper perfect for presentation, proposals, reports, and newsletters.
It is heavyweight for an impressive look and feel.
These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for near-
photographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
These papers are matte-coated on both sides for two-sided use. They are the perfect choice for near-
photographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
Everyday printing
All the papers listed for everyday printing feature ColorLok Technology for less smearing, bolder blacks, and vivid
colors.
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough for two-sided
color usage with no show-through, which makes it ideal for newsletters, reports, and flyers.
● HP Printing Paper
HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more
substantial than documents printed on standard multipurpose or copy paper. It is acid-free for longer
lasting documents.
● HP Office Paper
HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other
everyday documents. It is acid-free for longer lasting documents.
HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber.
To order HP papers and other supplies, go to www.hp.com . At this time, some portions of the HP website are
available in English only.
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All papers
with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and
produce documents with crisp, vivid color, bolder blacks and shorter dry-time than ordinary plain papers. Look
for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers.
After installing the HP printer software, depending on your operating system, do one of the following:
NOTE: If you are using the HP Smart app instead of the printer software, see Use the HP Smart app to print,
scan, and troubleshoot on page 18.
● Windows 10: From the computer desktop, click Start, select HP from the app list, and then select the icon
with the printer name.
● Windows 8.1: Click the down arrow in the lower left corner of the Start screen, and then select the printer
name.
● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the
printer name.
● Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the
printer, and then select the icon with the printer name.
NOTE: The HP Smart app is supported on iOS, Android, Windows 10, OS X 10.11, and macOS 10.12 and later
devices. The app might not be available in all languages. Some features might not be available with all printer
models.
For basic instructions on how to print, scan, and troubleshoot using HP Smart, see Print using the HP Smart app
on page 30, Scan using the HP Smart app on page 47, and Get help from the HP Smart app on page 87. For
more information, you can also visit:
● iOS/Android: www.hp.com/go/hpsmart-help
● Windows: www.hp.com/go/hpsmartwin-help
● Mac: www.hp.com/go/hpsmartmac-help
1. To get the HP Smart app, visit 123.hp.com to download and install the app.
Users of iOS, Android, and Windows 10 devices can also get the app from the device's app store.
● Windows 10: From the computer desktop, click Start, and then select HP Smart from the app list.
3. Connect to your printer. For information, see Connect your printer by using the HP Smart app on page 76.
● After initial setup of printer, the printer will enter Sleep mode after 5 minutes of inactivity.
● The Power button light is dimmed and the printer control panel display is off in Sleep mode.
● Pressing any button on the control panel, or sending a print or scan job can wake up the printer from sleep
mode.
To change the Sleep mode settings from the Embedded Web Server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
4. Click Apply.
NOTE: In Quiet Mode, if you print on plain paper with the Draft or Best print quality, or if you print photos or
envelopes, the printer works in the same way as when Quiet Mode is off.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 17.
NOTE: The Quiet mode tab is available only if the printer is connected from the HP printer software.
3. Click On or Off.
To turn Quiet Mode on or off from the Embedded Web Server (EWS)
1. Open the EWS. For more information, see Open the embedded web server on page 80.
3. In the Preferences section, select Quiet Mode, and then select On or Off
4. Click Apply.
If your printer supports this energy saving feature, Auto-Off is automatically enabled or disabled depending on
printer capabilities and connection options. Even when Auto-Off is disabled, the printer enters Sleep mode after
5 minutes of inactivity to help reduce energy use.
● Auto-Off is enabled when the printer is turned on, if the printer does not have network, fax or Wi-Fi Direct
capability, or is not using these capabilities.
● Auto-Off is disabled when a printer’s wireless or Wi-Fi Direct capability is turned on or when a printer with
fax, USB, or Ethernet network capability establishes a fax, USB, or Ethernet network connection.
TIP: To conserve battery power, you can enable Auto-Off, even when the printer is connected or wireless
is turned on.
ENWW Auto-Off 21
2 Print
● Load media
● Print documents
● Print photos
● Print envelopes
3. Insert a stack of paper into the input tray with the short edge down and the print-side up, and slide the
stack of paper down until it stops.
If you are loading small-size paper (like photo paper), make sure the paper stack is aligned with the far-
right side of the tray.
To load envelopes
3. Insert one or more envelopes into the far-right side of the input tray and slide the stack of envelopes down
until it stops.
a. For envelope with flap on the long edge, insert the envelope vertically with the flap on the left side
and facing down.
b. For envelope with the flap on the short edge, insert the envelope vertically with the flap on the top
and facing down.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options on the Printing Shortcuts or Printing Shortcut tab.
To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
NOTE: If you change the paper size, be sure to load the correct paper in the input tray.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. On the Printing Shortcuts or Printing Shortcut tab, select the Two-sided (Duplex) Printing shortcut, and then
select an option from the Print On Both Sides Manually drop-down list.
To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
NOTE: If you change the paper size, be sure to load the correct paper in the input tray.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options on the Printing Shortcuts or Printing Shortcut tab.
To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
NOTE: If you change the paper size, be sure to load the correct paper in the input tray.
NOTE: After the printing is finished, remove unused photo paper from the input tray. Store the photo paper so
it does not start to curl, which could reduce the quality of your printout.
NOTE: For details on how to format text for printing on envelopes, refer to the documentation of the
application that you are using.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options on the Printing Shortcuts or Printing Shortcut tab.
To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
NOTE: If you change the paper size, be sure to load the correct paper in the input tray.
1. Load paper in the input tray. For more information, see Load media on page 23.
TIP: If a printer is already set up, you can select it from the Home screen of HP Smart by swiping left or
right and selecting it.
To use a different printer, click or tap (Plus icon) on the Home screen, and then select a different printer
or add a new printer.
3. Tap Print.
1. On the Home screen of HP Smart, click or tap Print at the bottom of the screen.
2. Select Print Photo, locate a photo you want to print, and then click or tap Select Photos to Print.
Select Print Document, locate a PDF document you want to print, and then click or tap Print.
3. Select the appropriate options. To view more settings, click or tap More settings.
For more information about printing settings, see Tips for print success on page 34.
1. On the Home screen of HP Smart, click Print tile, and then click Print Document or Print Photo.
2. Locate the document or photo in the Documents folder or Pictures library, or browse to another folder
where the file is saved.
3. Select the document or photo you want, and then click Print.
4. Select a different printer or make any changes to the print settings, such as paper size or output quality.
5. Click Print.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk
space.
For supported print resolutions, visit the printer support website at www.support.hp.com.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
● Click the Paper/Quality tab. From the Paper Size drop-down list, select the appropriate paper size.
From the Paper Type drop-down list, select the appropriate paper type.
● Click the Advanced tab, and then select Print in Max DPI.
Windows 7
● Click the Paper/Quality tab. From the Media drop-down list, select the appropriate paper type.
● Click the Advanced button. Select the appropriate paper size from the Paper Size drop-down list. In
the Printer Features area, select Yes from the Print in Max DPI drop-down list. Then click OK to close
the Advanced Options dialog.
For more printing tips, see Printer settings tips on page 34.
5. Confirm the orientation on the Layout tab, and then click OK to print.
If your printer is already set up and connected to your wireless network, you can enable printing from a Mac
desktop or laptop using the System Preferences menu.
2. Click Add + to set up the printer on your Mac. Choose your printer from the displayed list of network
printers, then click Add. This will install the available print, scan, or fax drivers for your printer.
These instructions let you print from your Mac. Continue to use the HP Smart app to monitor ink levels and
printer alerts.
▲ If you have not set up or connected your printer to your network, go to 123.hp.com to install the necessary
software.
NOTE: You can also use the HP Smart app to print from mobile devices. For more information, see Print using
the HP Smart app on page 30.
1. Make sure your printer and device are turned on and connected to the same wireless network.
TIP: If you want to print without connecting to a router, use Wi-Fi Direct to print from mobile device. For
more information, see Connect wirelessly to the printer without a router (Wi-Fi Direct) on page 73.
● Android: Download the HP Print Service Plugin (supported by Android 4.4 devices and later) from the
Google Play Store and enable it on your device.
● Windows Mobile: Tap Print from the Device menu. No setup is required since the software is
preinstalled.
NOTE: If your printer is not listed, you might need to do a one-time setup of the printer using the
Add Printer wizard.
● Chromebook: Download and install the HP Print for Chrome app from the Chrome Web Store to
enable both Wi-Fi and USB printing.
● Amazon Kindle Fire HD9 and HDX: The first time you select Print on your device, the HP Print Service
Plugin is automatically downloaded to enable mobile printing.
NOTE: For detailed information about enabling printing from your mobile devices, visit the HP Mobile
Printing website ( www.hp.com/go/mobileprinting ). If a local version of this website is not available in your
country/region or language, you might be directed to the HP Mobile Printing website in another country/
region or language.
3. Make sure the loaded paper matches the paper settings of the printer (see Load media on page 23 for
more information).
Accurately setting the paper size for the paper that is loaded enables your mobile device to know what
paper size it is printing.
NOTE: To change the default paper settings, see Change the default paper settings detected by printer
on page 14.
To print successfully, the HP printheads should be functioning properly, the ink tanks should be filled with
sufficient ink, the paper should be loaded correctly, and the printer should have the appropriate settings. For
more information, see Tips for working with ink and printhead on page 66.
● Ensure that paper loaded in the input tray lays flat, and the edges are not bent or torn.
● Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width
guide does not bend the paper in the input tray.
● To change default print settings, open the HP printer software, click Print & Scan , and then click Set
Preferences. For information how to open the printer software, see Open the HP printer software
(Windows) on page 17.
TIP: To learn more about the options in the printer driver, hover your mouse over each option to view the
tooltips.
● You can use printing shortcuts to save time setting desired printing preferences. A printing shortcut stores
the settings that are appropriate for a particular type of job, so that you can set all the options with a single
click. To use a shortcut, go to the Printing Shortcuts or Printing Shortcut tab, select the desired shortcut,
and then click OK.
To add a new printing shortcut, set the desired printing preferences on the Paper/Quality, Layout, or
Advanced tab, select the Printing Shortcuts or Printing Shortcut tab, click Save As and enter a name, and
then click OK.
– Paper Size: Select the paper size you loaded in the input tray.
– Paper Source: Select the paper tray you loaded the paper into.
– Paper Type or Media: Select the paper type you are using.
– Color: Uses black and color ink for full color prints.
– Black & White or Black Ink Only: Uses the black ink only for normal or lower quality black and white
prints.
– High Quality Grayscale: Uses black and color ink to produce a wider range of black and grey tones for
high quality black and white prints.
The print quality is measured in print resolution dots per inch (dpi). Higher dpi produces clearer and more
detailed prints, but slows print speed and might use more ink.
– Draft: Lowest dpi typically used when ink levels are low or when high quality prints are not needed.
– Print in Max DPI: Highest dpi setting available for print quality.
– HP Real Life Technologies: This feature smooths and sharpens images and graphics for improved
print quality.
– Orientation: Select Portrait for vertical prints or Landscape for horizontal prints.
– Print on Both Sides Manually: Manually flip the pages after one side of the paper prints out so that you
can print on both sides of the paper.
○ Flip on Long Edge: Select it if you want to flip pages by the long edge of the paper when printing
on both sides of the paper.
○ Flip on Short Edge: Select it if you want to flip pages by the short edge of the paper when
printing on both sides of the paper.
– Booklet Layout or Booklet: Allows you to print a multiple-page document as a booklet. It places two
pages on each side of a sheet that can then be folded into a booklet in half size of the paper.
○ Left binding or Booklet-LeftBinding: The binding side after folded into a booklet appears at the
left side. Select this option if your reading habit is from left to right.
○ Right binding or Booklet-RightBinding: The binding side after folded into a booklet appears at
the right side. Select this option if your reading habit is from right to left.
– Borderless or Page Borders: Allows you to add or remove borders to the pages if you print the
document with two or more pages per sheet.
– Pages per Sheet Layout: Helps you specify the order of the pages if you print the document with more
than two pages per sheet.
– Pages to Print: Allows you to print the odd pages only, print the even pages only, or print all pages.
– Reverse page order or Page Order: Allows you to print pages from front to back or in reverse order.
● HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime, from
any location. It's as simple as sending an email to the email address assigned to your printer when you
enable Web Services on the printer. No special drivers or software are needed. If you can send an email, you
can print from anywhere, using HP ePrint.
Once you have signed up for an account on HP Connected ( www.hpconnected.com ; might not be available
in all countries/regions), you can sign in to customize your printer’s HP ePrint email address, control who
can use the email address to print, and get help for HP ePrint.
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. In the Web Services Settings section, click Setup , click Continue, and follow the onscreen instructions to
accept the terms of use.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
4. When the printer is connected to the server, the printer prints an information page. Follow the instructions
on the information page to finish the setup.
Before you can use HP ePrint, make sure the printer is connected to an active network providing Internet access.
▲ Press (the Information button) to print an information page, and then find the email address for your
printer from the page.
NOTE: For information about using the email application on your computer or mobile device, see the
documentation provided with the application.
NOTE: The email will be printed once it is received. As with any email, there is no guarantee when or
whether it will be received. You can check the print status on HP Connected ( www.hpconnected.com ;). This
site might not be available in all countries/regions.
NOTE: Documents printed with HP ePrint may appear different from the original. Style, formatting, and
text flow may differ from the original document. For documents that need to be printed with a higher
quality (such as legal documents), we recommend that you print from the software application on your
computer, where you will have more control over what your printout looks like.
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. From the left menu, click Web Services Settings, and then click Summary.
4. In the Web Services Settings section, click Turn off for HP ePrint.
NOTE: To remove all Web Services, see Remove Web Services on page 43.
Go to the HP Connected website (might not be available in all countries/regions) for more information and
specific terms and conditions: www.hpconnected.com .
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. From the left menu, click Web Services Settings, click Remove Web Services, and then follow the on-screen
instructions.
● Copy documents
● Load original
You can also use the HP Smart app to copy from your mobile device. For information about this app, see Use the
HP Smart app to print, scan, and troubleshoot on page 18.
To copy documents
For information about how to load paper, see Load media on page 23.
2. Load the original print-side down near the icon at the corner of the scanner glass.
3. Press either (the Black Copy button) or (the Color Copy button) to make a copy.
Copying will start two seconds after the last button press.
TIP: You can increase the number counter by pressing, and holding a copy button.
Plain paper Press and hold both copy buttons ( ) at the same time for three Photo paper
seconds.
Photo paper Press and hold both copy buttons ( ) at the same time for three Plain paper
seconds.
2. Load the original print-side down near the icon at the corner of the scanner glass.
You can use the HP Smart app to scan documents or photos from the printer's scanner, and you can also scan
using your device camera. HP Smart includes editing tools that allow you to adjust the scanned image before
saving or sharing. You can print, save your scans locally or in cloud storage, and share them via email, SMS,
Facebook, Instagram, etc. To scan with HP Smart, follow the instructions provided in the appropriate section
below, depending on the type of device you are using.
TIP: If a printer is already set up, you can select it from the Home screen of HP Smart by swiping left or
right and selecting it.
To use a different printer, click or tap (Plus icon) on the Home screen, and then select a different printer
or add a new printer.
● If you are using the device camera, make sure you are in a well-lit area, and the photo or document
does not blend in with the surface it rests on.
● If you are using the printer scanner, tap the Settings icon to select the input source and change the
scan settings, and then tap the Scan icon.
● If you select the option for files and photos, follow onscreen instructions to select the desired file,
make the desired changes, and save the changes.
4. When you have finished adjusting the scanned document or photo, save, share, or print it.
3. On the Home screen of HP Smart app, make sure your printer is selected.
5. From the Scan window, make the desired changes, and then click Scan.
6. In the scan preview, click Edit to make the desired changes, and then apply the changes.
7. Click Add Pages to add pages to your scan job, if necessary, and then print, save, or share the scan.
1. Load the original print-side down near the icon at the corner of the scanner glass on the printer.
2. Open HP Smart. For more information, see Use the HP Smart app to print, scan, and troubleshoot
on page 18.
5. Click or tap the Preview icon to preview and adjust the image if necessary.
● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness, saturation,
or angle.
8. Select the file type you want, and then click or tap the Save icon to save it or click or tap the Share icon to
share it with others.
If your device has a camera, you can use the HP Smart app to scan a printed document or photo with the device
camera. You can then use HP Smart to edit, save, print or share the image.
1. Open HP Smart. For more information, see Use the HP Smart app to print, scan, and troubleshoot
on page 18.
3. Put a document or photo in front of the camera, and then click or tap the round button at the bottom of the
screen to take an image.
● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness, saturation,
or angle.
6. Select the file type you want, and then click or tap the Save icon to save it or click or tap the Share icon to
share it with others.
HP Smart provides editing tools, such as crop and rotate, which you can use to adjust a previously scanned
document or photo on your device.
1. Open HP Smart. For more information, see Use the HP Smart app to print, scan, and troubleshoot
on page 18.
3. Select the document or photo that you want to adjust, and then click or tap Open.
● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness, saturation,
or angle.
6. Select the file type you want, and then click or tap Save or Share to save the file or share it with others.
1. Load the original print-side down near the icon at the corner of the scanner glass.
2. In the HP printer software (available from the Start menu), click Scan , and then click Scan a Document or
Photo .
3. Select the type of scan you want and then click Scan .
● Choose Save as PDF to save the document (or photo) as a PDF file.
● Choose Save as JPEG to save the photo (or document) as an image file.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for any
scan.
For more information, see Change scan settings (Windows) on page 50.
If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.
1. Load the original print-side down near the icon at the corner of the scanner glass.
2. In the HP printer software, available from the Start menu, click Scan , and then click Scan a Document or
Photo .
3. Select the type of scan you want and then click Scan .
Choose Email as PDF or Email as JPEG to open your email software with the scanned file as an attachment.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for any
scan.
For more information, see Change scan settings (Windows) on page 50.
If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.
2. In the HP printer software, available from the Start menu, click Scan , and then click Scan a Document or
Photo .
3. Click the More link in the top right corner of the HP Scan dialog.
The detailed settings pane appears on the right. The left column summarizes the current settings for each
section. The right column allows you to change the settings in the highlighted section.
4. Click each section at the left of the detailed settings pane to review the settings in that section.
You can review and change most settings using drop-down menus.
Some settings allow greater flexibility by displaying a new pane. These are indicated by a + (plus sign) at
the right of the setting. You must either click OK to accept or click Cancel to cancel any changes on this pane
to return to the detailed settings pane.
● Click Scan . You are prompted to save or reject the changes to the shortcut after the scan is finished.
● Click the save icon to the right of the shortcut, and then click Scan .
1. Load the original print-side down near the icon at the corner of the scanner glass.
2. In the HP printer software, available from the Start menu, click Scan , and then click Scan a Document or
Photo .
4. Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then click
Create .
For example, if you are creating a new shortcut for photos, choose either Save as JPEG or Email as JPEG .
This makes available the options for working with graphics when scanning.
5. Change the settings for your new shortcut to meet your needs, and then click the save icon to the right of
the shortcut.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for any
scan.
For more information, see Change scan settings (Windows) on page 50.
This feature is available even if you did not install the printer software on your computer.
NOTE: By default, Webscan is off. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it off. For more
information, contact your network administrator or the person who set up your network.
To enable Webscan
1. Open the embedded web server. For more information, see Open the embedded web server on page 80.
5. Click Apply.
Scanning using Webscan offers basic scan options. For additional scan options or functionality, scan from the HP
printer software.
1. Load the original print-side down near the icon at the corner of the scanner glass.
2. Open the embedded web server. For more information, see Open the embedded web server on page 80.
4. Click Webscan in the left pane, change any settings, and then click Start Scan .
● Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as part
of the image.
● Load the original print-side down near the icon at the corner of the scanner glass.
● To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
● To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the software.
● You can also use the app to scan from your mobile device. For information about this app, see Use the HP
Smart app to print, scan, and troubleshoot on page 18.
● Ink levels
● Clean printer
● Move printer
1. In the HP printer software (available from the Start menu), click Estimated Levels at the top of the window.
4. Match the color of the ink bottle with the color of the ink tank. Hold the bottle on the tank nozzle, making
sure the tip of the bottle fits properly over the nozzle, and let the ink drain into the tank until the tank is full.
If the ink does not drain immediately, remove the bottle and properly reinsert it on the tank.
NOTE: Do not squeeze the ink bottles when filling ink. The ink bottles you have might vary.
NOTE: If there is leftover ink in the bottle, store the bottle in an upright position in a cool and dry location.
● Open the ink bottles only when you plan to fill the ink tanks.
● Do not tilt, shake, or squeeze the ink bottle when it is open to prevent ink leaks.
To order original HP supplies for the printer, go to www.hp.com/buy/supplies . If prompted, choose your country/
region, and then follow the prompts to find the right ink bottles for your printer.
NOTE: Ordering ink bottles online is not supported in all countries/regions. If it is not available in your country/
region, you may still view supplies information and print a list for reference when shopping at a local HP reseller.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
● Under Print in Grayscale, select Black Ink Only from the list, and then click OK.
Windows 7
● On the Layout or Paper/Quality tab, click the Advanced button to open the Advanced Options dialog
box.
● From the Print in Grayscale drop-down list, select Black Ink Only, and then click OK.
To print a print quality diagnostics page from the printer control panel
1. Load Letter or A4 unused plain white paper into the input tray.
2. Press (the Color Copy button), and (the Resume button) at the same time.
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, and then click Print Quality Diagnostics Page.
5. Review the cyan, magenta, yellow, and black boxes along with the other content on the diagnostics page.
7. Align the printheads (cartridges) if straight lines appear jagged on printouts, or if the diagnostic page
indicates aligning printheads might help.
8. If print quality problems persist after cleaning and aligning printheads (cartridges), contact HP support.
From the HP Smart app, you can also improve the print quality. For more information about the app, see Use the
HP Smart app to print, scan, and troubleshoot on page 18.
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, click the desired option, and then follow the onscreen
instructions.
NOTE: Clean the printheads only when necessary. Unnecessary cleaning wastes ink and shortens the life of the
printheads.
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, click the desired option, and then follow the onscreen
instructions.
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, click the desired option, and then follow the onscreen
instructions.
● To protect the printheads from drying out, always turn the printer off using the Power button, and wait until
the Power button light goes out.
● Do not open or untape printheads until you are ready to install them. Leaving tape on the printheads
reduces ink evaporation.
● After you have set up the printer, do not open the printhead latch unless instructed to do so.
● Align the printer for best print quality. See Printing issues on page 101 for more information.
● If you remove a printhead from the printer for any reason, try to replace it again as soon as possible.
Outside of the printer, if unprotected, the printhead may begin to dry out.
Ink tips
● Make sure the ink tanks are not low on ink before printing.
● Refill the ink tanks when they are low on ink. Printing with the ink tanks low on ink may cause damage to
your printer.
NOTE: Original HP printheads and ink are designed and tested with HP printers and papers to help you easily
produce great results, time after time.
HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result
of using a non-HP supply will not be covered under warranty.
If you are moving the printer within your home or office, keep the printhead latch closed, and keep the printer
level.
If you are moving the printer outside your home or office, see the instructions provided inbox for moving printer,
or visit www.support.hp.com .
● Connect your printer to your computer with a USB cable (non-network connection)
● The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID) and a wireless
password.
● The wireless password prevents other people from connecting to your wireless network without your
permission. Depending on the level of security required, your wireless network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless network, you
can sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security password or cannot remember this information, see the
documentation provided with your computer or with the wireless router. If you still cannot find this information,
contact your network administrator or the person who set up the wireless network.
TIP: To restore the printer network settings, see Restore original factory defaults and settings on page 111.
● Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
● A computer that is already connected to the wireless network that you want to use to connect your printer.
If connecting the printer wirelessly using HP software, place the printer in network setup mode by restoring the
printer network settings. The setup mode will last for two hours. For information on how to restore the printer
network settings, see Restore original factory defaults and settings on page 111.
1. In the HP printer software (available from the Start menu), click Tools.
3. Click Connect a new device, click Wireless, and then follow the onscreen instructions.
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before connecting your printer to a wireless network using WPS, make sure you have the following:
● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.
● A computer that is already connected to the wireless network that you want to use to connect your printer.
Be sure you have installed the HP printer software on the computer.
If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your
router has a push button, follow the PIN method.
1. Press and hold (the Wireless button) on the printer for more than three seconds to start WPS push
mode. The Wireless light starts blinking.
NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.
To print the page, press (the Wireless button) and (the Information button) at the same time, and
hold them for five seconds.
2. Open the configuration utility or software for the wireless router or wireless access point, and then enter
the WPS PIN.
NOTE: For more information about using the configuration utility, see the documentation provided with
the router or wireless access point.
Wait for about two minutes. If the printer connects successfully, the Wireless light stops blinking but remains lit.
● Make sure your computer or mobile device has the necessary software.
– If you are using a computer, make sure you have installed the printer software provided with the
printer.
If you have not installed the HP printer software on the computer, connect your computer to Wi-Fi
Direct for your printer first and then install the printer software. Select Wireless when prompted by
the printer software for a connection type.
– If you are using a mobile device, make sure you have installed a compatible printing app.
● Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
● Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to a
network using a wireless connection.
● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
When Wi-Fi Direct is turned on, the (Wi-Fi Direct icon) should appear on the printer display. If the icon is off,
follow these instructions.
● On the printer control panel, press (the Wireless button), and (the Resume button) at the same
time, and hold them for three seconds.
NOTE: When you turn on Wi-Fi Direct the first time, the printer automatically prints a Wi-Fi Direct guide.
The guide provides instructions about how to use Wi-Fi Direct. You can also press (the Resume button),
and (the Information button) at the same time to print this guide. The guide may not be available in all
languages.
● From the printer control panel, press (the Information button) to print the printer information page.
NOTE: For other network details, press (the Wireless button), and (the Information button) at the
same time to print the network configuration page.
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. From the left menu, click Wi-Fi Direct, and then click the Edit Settings button.
5. Click Apply.
For Google Android devices, make sure you have installed the latest version of HP Print Service Plugin on your
mobile device. You can download this plugin from the Google Play application store.
2. Turn on Wi-Fi Direct on your mobile device. For more information, see the documentation provided with the
mobile device.
3. From your mobile device, select a document from a print enabled application, and then select the option to
print the document.
4. From the list of available printers, choose the Wi-Fi Direct name shown such as DIRECT-**-HP Smart Tank
(where ** are the unique characters to identify your printer).
● If the Wi-Fi Direct connection security for the printer is Automatic (the default setting), the mobile
device will connect to the printer automatically and send the print job.
● If the Wi-Fi Direct connection security for the printer is set to Manual:
– If the printer prints out a page with a PIN code, follow the instruction on the page.
TIP: You can change the Wi-Fi Direct connection security setting for the printer from the embedded web
server (EWS).
For more information, see To change the Wi-Fi Direct connection security settings for the printer using the
embedded web server on page 74.
To print from a wireless-capable mobile device that does not support Wi-Fi Direct
1. Make sure you have installed a compatible printing app on your mobile device. For more information, visit
www.hp.com/global/us/en/eprint/mobile_printing_apps.html.
2. Make sure you have turned on Wi-Fi Direct on the printer. For more information, see To turn Wi-Fi Direct on
or off on page 73.
3. Turn on the wireless (Wi-Fi) connection on your mobile device. For more information, see the
documentation provided with the mobile device.
4. From the mobile device, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown such
as DIRECT-**-HP Smart Tank (where ** are the unique characters to identify your printer).
1. Make sure you have turned on Wi-Fi Direct on the printer. For more information, see To turn Wi-Fi Direct on
or off on page 73.
2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with the
computer.
NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3. From the computer, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown such
as DIRECT-**-HP Smart Tank (where ** are the unique characters to identify your printer).
To find the Wi-Fi Direct name or password, see To find the Wi-Fi Direct name or password on page 73.
4. Proceed to step 5 if the printer has been installed and connected to the computer over a wireless network.
If the printer has been installed and connected to your computer with a USB cable, follow the steps below
to install the printer software using the Wi-Fi Direct connection.
● Windows 10: From the computer desktop, click Start, select HP from the app list, and then select
the icon with the printer name.
● Windows 8.1: Click the down arrow in the lower left corner of the Start screen, and then select
the printer name.
● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
● Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder
for the printer, and then select the icon with the printer name.
c. Click Device Setup & Software, and then select Connect a new device.
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app is supported on
iOS, Android, Windows, and Mac devices. For information about the app, see Use the HP Smart app to print, scan,
and troubleshoot on page 18.
1. Make sure your printer and device are turned on and connected to the same wireless network.
2. If more than two hours have passed since you first turned on the printer and you have not set up the
printer wirelessly, place the printer in the network setup mode by restoring the printer network settings.
For information on how to restore the printer network settings, see Restore original factory defaults and
settings on page 111.
3. If you are using an iOS or Android mobile device, make sure the device has Bluetooth turned on.
NOTE:
● HP Smart uses Bluetooth for printer setup only. This helps to make the setup process faster and
easier on iOS and Android mobile devices.
5. iOS/Android: On the Home screen of HP Smart, tap (Plus icon), and then select the printer. If the printer
is not in the list, tap Add a new printer.
Windows: On the Home screen of HP Smart, click or tap (Plus icon), and then select or add a printer.
Mac: On the Home screen of HP Smart, click (Plus icon), and then select the printer. If the printer is not
in the list, click Printer, and select Set up a new printer.
Follow the onscreen instructions on your device to add the printer to your network.
Press (the Wireless button) to turn on or off the printer wireless capabilities.
● If the printer has an active connection to a wireless network, the Wireless light is on solid blue, and the
printer display shows the Wireless icon and the Signal Bars icon.
● For more information about the wireless status, see Control panel lights and display icons status on page 7.
To print the wireless network test report and network configuration page
Press (the Wireless button) and (the Information button) at the same time.
● The wireless network test report shows the diagnostics results for the status of the wireless network,
wireless signal strength, detected networks, and more.
● The network configuration page shows the network status, hostname, network name, and more.
This method is available if you have already installed the printer software.
IMPORTANT: This method requires a USB cable. Do not connect the USB cable until prompted to do so.
1. In the HP printer software (available from the Start menu), click Tools.
1. If more than two hours have passed since you first turned on the printer and you have not set up the
printer wirelessly, place the printer in network setup mode by restoring the printer network settings.
The setup mode will last for two hours. For information on how to restore the printer network settings, see
Restore original factory defaults and settings on page 111.
2. Tap (Plus icon) on the Home screen of HP Smart, and then select the option to add a new printer.
If the printer software has been installed, the printer will operate as a plug-and-play device. If the software has
not been installed, follow the steps below to connect the printer with the USB cable.
1. Enter 123.hp.com in a web browser on your computer to download and install the HP printer software. You
can also use the HP printer software CD (if provided), or download the software from
www.support.hp.com .
NOTE: Do not connect the USB cable to the printer until you are prompted to do so.
2. Follow the onscreen instructions. When you are prompted, connect the printer to the computer by selecting
USB on the Connection Options screen.
Before changing from a USB connection to a wireless network, make sure that:
● The printer is connected to your computer with the USB cable until you are prompted to disconnect the
cable.
● Your computer is already connected to the wireless network that you want to connect the printer.
NOTE: If you are unable to set up the connection following the steps in this section, see Network and
connection issues on page 107.
1. In the HP printer software (available from the Start menu), click Tools.
3. Select Convert a USB connected device to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless network using the HP Smart app on a Windows 10 computer (Windows)
1. Before you proceed, make sure your computer and printer meet the following requirements:
2. Open the HP Smart app. For information, see Use the HP Smart app to print, scan, and troubleshoot
on page 18.
TIP: If a printer is already set up, you can select it from the Home screen of HP Smart by swiping left or
right and selecting it.
To use a different printer, click or tap (Plus icon) on the Home screen, and then select a different printer
or add a new printer.
4. Click Learn More when you see “Make printing easier by connecting your printer wirelessly” on top of the
home page of the app.
NOTE: You can open and use the EWS without being connected to the Internet. However, some features are not
available.
● About cookies
1. Find the IP address or hostname of the printer by printing the printer information page.
To print the page, press (the Information button) on the printer control panel.
2. In a supported web browser on your computer, type the IP address or hostname assigned to the printer.
For example, if the IP address is 192.168.0.12, type the following address into a Web browser: http://
192.168.0.12.
To open the embedded web server from the HP printer software (Windows)
1. Open the printer software. For more information, see Open the HP printer software (Windows) on page 17.
2. Click the Print & Scan tab, and then click Maintain Your Printer.
4. After the printer information is retrieved, click Printer EWS Home Page near the bottom right of the page.
1. Make sure you have turned on Wi-Fi Direct on the printer. To turn on Wi-Fi Direct, see Connect wirelessly to
the printer without a router (Wi-Fi Direct) on page 73.
2. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**-HP Smart Tank (where ** are the unique characters to identify your printer).
To find the Wi-Fi Direct name or password, see Connect wirelessly to the printer without a router (Wi-Fi
Direct) on page 73.
3. In a supported web browser on your computer, type the following address: http://192.168.223.1.
You can configure your browser to accept all cookies, or you can configure it to alert you every time a cookie is
offered, which allows you to decide which cookies to accept or refuse. You can also use your browser to remove
unwanted cookies.
NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the following features:
● Starting where you left the application (especially useful when using setup wizards)
For information about how to change your privacy and cookie settings and how to view or delete cookies, see the
documentation available with your Web browser.
● When setting up the wireless networked printer, make sure your wireless router or access point is powered
on. The printer searches for wireless routers, then lists the detected network names on the computer.
● If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from the VPN
before you can access any other device on your network, including the printer.
● Learn more about configuring your network and the printer for wireless printing. Click here to go online for
more information.
● Learn how to find your network security settings. Click here to go online for more information.
● Make sure the printer and device are turned on and connected to the same wireless network.
● If more than two hours have passed since you first turned on the printer and you have not set up the
printer wirelessly, place the printer in network setup mode by restoring the printer network settings. The
setup mode will last for two hours. For information on how to restore the printer network settings, see
Restore original factory defaults and settings on page 111.
● If you are using a mobile device, make sure the device has Bluetooth turned on.
● Learn about the HP Print and Scan Doctor. Click here to go online for more information.
NOTE: This utility is only available for the Windows operating system.
● Learn how to change from a USB to wireless connection. Click here to go online for more information.
● Learn how to work with your firewall and antivirus programs during printer setup. Click here to go online for
more information.
● Cartridge problem
● Printing issues
● Copy issues
● Scan issues
● HP support
ENWW 83
Get help with HP online troubleshooting
Use an HP online troubleshooting tool to solve your printer issues. Use the table below to identify your problem
and click the appropriate link.
NOTE: The HP online troubleshooting wizards might not be available in all languages.
Troubleshoot paper jam issues Clear jammed paper from the printer and resolve paper or paper feed issues.
Troubleshoot a print carriage Clear obstructions that are blocking the print carriage.
jam
Troubleshoot issues with print Resolve issues with printer responsiveness, pages not printing, or “Unable to print” errors.
job not printing
Troubleshoot copy and scan Determine why the printer will not copy or scan, or improve the quality of your copies or scans.
issues
Find network settings for a Find your wireless network name (SSID) and password.
wireless connection
Troubleshoot wireless network Resolve wireless networking issues, including issues with setting up a wireless connection for the first
connection issues time or fixing a connection that is no longer working.
Convert a USB connection to Convert your printer-to-computer connection from USB to wireless.
wireless
Troubleshoot a firewall or Determine if a firewall or antivirus program is preventing your computer from connecting to the printer
antivirus issue and resolve the issue.
Troubleshoot Wi-Fi Direct Resolve Wi-Fi Direct problems or configure Wi-Fi Direct.
connection issues
Troubleshoot mobile network Resolve issues with connecting a mobile device to your printer.
issues
HP Print and Scan Doctor Automatically diagnose and resolve printer issues.
Get printer documentation, troubleshooting Use my mobile device to print, scan, and manage my
information, software updates, and more printer with the HP Smart app
● Windows: www.hp.com/go/hpsmartwin-help
● Mac: www.hp.com/go/hpsmartmac-help
www.register.hp.com www.support.hp.com
For details on the errors and solutions, see Control panel lights and display icons status on page 7.
TIP: If a printer is already set up, you can select it from the Home screen of HP Smart by swiping left or
right and selecting it.
To use a different printer, click or tap (Plus icon) on the Home screen, and then select a different printer
or add a new printer.
Get step-by-step instructions for clearing paper jams and resolving issues with paper or the paper feed.
If something is blocking the print carriage or it does not move easily, get step-by-step instructions.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
NOTE: Do not use any tools or other devices to remove jammed objects. Always use caution when removing
jammed objects from inside the printer.
1. Press (the Cancel button) to try to clear the jam automatically. If this does not work, complete the
following steps to clear the jam manually.
3. Make sure there is no foreign object in the paper path, and then reload paper.
NOTE: The input tray shield can prevent foreign debris from falling into the paper path and causing
serious paper jams. Do not take down the input tray shield.
4. Press (the Resume button) on the control panel to continue the current job.
1. Press (the Cancel button) to try to clear the jam automatically. If this does not work, complete the
following steps to clear the jam manually.
3. Press (the Resume button) on the control panel to continue the current job.
1. Press (the Cancel button) to cancel printing. If this does not clear the error, complete the following steps
to clear the jam manually.
2. Close the output tray extender, and then close the output tray.
5. Make sure the print carriage is not obstructed. You might need to slide the carriage to the right side.
NOTE: After you have set up the printer, do not open the printhead latch unless instructed to do so.
NOTE: Follow the instructions in this section after you have tried other ways to clear paper jams. Before you
begin, make sure the ink tank caps are firmly closed to prevent ink from leaking.
1. Press (the Cancel button) to cancel printing. If this does not clear the error, complete the following steps
to clear the jam manually.
3. Lift the front of the printer so that the printer is resting on its rear, to expose the bottom cleanout. Locate
the cleanout door on the bottom of the printer, and then pull both tabs on the cleanout door to open it.
NOTE: Do not keep the printer in a tilted position for too long to prevent ink from leaking.
6. Turn the printer upright, and then press (the Power button) to turn on the printer.
● Do not overfill the input tray, but make sure that you have at least 5 pages loaded, for best results.
● Keep your printer free of dust and debris by removing paper and closing the input tray when not in use.
● Ensure that paper loaded in the input tray lays flat, and the edges are not bent or torn.
● Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input
tray must be the same size and type.
Use HP paper for optimum performance. See Paper basics on page 15 for more information about HP
paper.
● Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width
guide does not bend the paper in the input tray.
● Do not add paper while the printer is printing. If the printer is about to run out of paper, wait until the out of
paper message appears before adding paper.
– Make sure paper is loaded in the input tray. For more information, see Load media on page 23.
– Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-
width guide does not bend the paper in the input tray.
– Make sure paper in the input tray is not curled. Uncurl paper by bending it in the opposite direction of
the curl.
– Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-
width guide does not bend the paper in the input tray.
– Make sure the pieces of the loaded paper are not sticking together.
● Distilled, filtered, or bottled water (tap water might damage the printer)
NOTE: Do not remove the input tray shield. The input tray shield prevents foreign debris from falling into
the paper path and causing paper jams.
7. Look down through the open input tray and find the gray paper pick rollers. You might need a flashlight to
illuminate the area.
8. Dampen a long cotton swab with bottled or distilled water, and then squeeze any excess water from the
cloth.
9. Press the swab against the rollers, and then rotate them upward with your fingers. Apply a moderate
amount of pressure to remove dust or dirt buildup.
NOTE: For more information on printhead problem, see Printhead icons and Ink/Printhead light
on page 9.
NOTE: The instructions here are only applicable in this section. After you have set up the printer, do not open
the printhead latch unless instructed to do so.
2. Close the output tray extender, and then close the output tray.
NOTE: After you have set up the printer, do not open the printhead latch unless instructed to do so.
e. Check if there is a plug on top of the printhead or plastic tape on the printhead contacts. If there is,
remove the plug from top of the printhead and the plastic tape from contacts.
g. Close the printhead latch. Make sure the printhead latch is properly closed to avoid problems such as
carriage jams.
NOTE:
● Open the printhead latch and clean printhead contacts only when necessary; for example, if a printhead
cannot be detected.
The instructions here are only applicable in this section. After you have set up the printer, do not open the
printhead latch unless instructed to do so.
● The cleaning procedure should take only a few minutes. Make sure that the printheads are reinstalled in the
printer as soon as possible. It is not recommended to leave the printheads outside of the printer longer
than 30 minutes. This could result in damage to the printheads.
2. Close the output tray extender, and then close the output tray.
NOTE: After you have set up the printer, do not open the printhead latch unless instructed to do so.
a. Hold the printhead by its sides and locate the electrical contacts on the printhhead.
The electrical contacts are the small gold-colored dots on the printhead.
NOTE: Be careful to wipe only the contacts, and do not smear any of the ink or other debris
elsewhere on the printhead.
c. On the inside of the printer, locate the contacts for the printhead.
The printer contacts are the set of gold-colored bumps positioned to meet the contacts on the
printhead.
9. Close the printhead latch. Make sure the printhead latch is properly closed to avoid problems such as
carriage jams.
11. Check if the error message has gone away. If you still receive the error message, turn the printer off, and
then on.
NOTE: This utility is only available for the Windows operating system.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Make sure that the printer is turned on and that there is paper in the input tray. If you are still unable to print, try
the following in order:
1. Check for error messages from the printer software and resolve them by following the on-screen
instructions.
2. If your computer is connected to the printer with a USB cable, disconnect and reconnect the USB cable. If
your computer is connected to the printer with a wireless connection, confirm that the connection is
working.
● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
b. Either double-click or right-click the icon for your printer and select See what's printing to open the
print queue.
c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Offline.
● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as Default
Printer.
● Windows 10 : From the Windows Start menu, click Windows System, and then click Control
Panel.
i. Point to or tap the upper-right corner of the screen to open the Charms bar, and then click the
Settings icon.
c. Double-click Services.
e. On the General tab, make sure Automatic is selected from the Startup type drop-down list.
● If the service is running, click Stop, and then click Start to restart the service.
● Windows 10: From the Windows Start menu, click Windows System, and then click Control
Panel. Under Hardware and Sound, click View devices and printers.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
b. Right-click the printer, and then select the option to see what is printing.
c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
confirm.
d. If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
Get step-by-step instructions if the printer does not create a copy, or if your printouts are low quality.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
HP Print and Scan The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Doctor
NOTE: This utility is only available for the Windows operating system.
Get step-by-step instructions if you cannot scan or if your scans are low quality.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards might not be available in all
languages.
HP Print and Scan The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Doctor
NOTE: This utility is only available for the Windows operating system.
Use an HP online ● Troubleshoot your wireless problem, whether your printer has never been connected or it was connected
troubleshooting wizard and is no longer working.
● Troubleshoot a firewall or antivirus issue, if you suspect that it is preventing your computer from
connecting to the printer.
● Find network settings for a wireless connection, if you do not remember your wireless network name
(SSID) or password.
● Convert a USB connection to wireless, to eliminate the USB cable between your devices and operate the
printer over a wireless network.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
▲ Print the wireless network test report and network configuration page. For more information, see Change
wireless settings on page 77.
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that can tell you the network name (SSID) and password
(network key).
NOTE: This utility is only available for the Windows operating system.
Use an HP online troubleshooting Learn how to find your network name (SSID) and wireless password.
wizard
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Use an HP online troubleshooting wizard Troubleshoot your Wi-Fi Direct problem or learn how to configure Wi-Fi Direct.
1. Make sure that the Wi-Fi Direct icon on the printer display is on. To turn on Wi-Fi Direct, see Connect
wirelessly to the printer without a router (Wi-Fi Direct) on page 73.
2. From your wireless computer or mobile device, turn on the wireless (Wi-Fi) connection, and then search for
and connect to the Wi-Fi Direct name of your printer.
4. If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/global/us/en/eprint/mobile_printing_apps.html.
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
NOTE: This utility is only available for the Windows operating system.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
● Make sure the printhead access door and the front door are properly closed.
● Make sure the printer's power cord is connected firmly to a functioning power outlet.
NOTE: When Auto-Off is enabled, the printer will automatically turn off after 2 hours of inactivity to help reduce
energy use. For more information, see Auto-Off on page 21.
● Turn the printer off, then on. If that does not resolve the problem, contact HP.
● Make sure the printer is connected to the Internet using a wireless connection.
● Make sure the latest product updates have been installed on the printer.
● Make sure Web Services is enabled on the printer. For more information, see Set up Web Services
on page 40.
● Make sure the network hub, switch, or router is turned on and working correctly.
● If you are connecting the printer using a wireless connection, make sure the wireless network is functioning
properly. For more information, see Network and connection issues on page 107.
● Make sure that the printer's email address is the only address listed in the “To” line of the email
message. If other email addresses are listed in the “To” line, the attachments you are sending might
not print.
● Make sure you are sending documents that meet the HP ePrint requirements. For more information,
visit www.hpconnected.com (might not be available in all countries/regions).
● If your network uses proxy settings when connecting to the Internet, make sure the proxy settings you are
entering are valid:
● Check the settings being used by the web browser you are using (such as Internet Explorer, Firefox, or
Safari).
If the proxy settings used by your firewall have changed, you must update these settings in either the
printer control panel or the embedded web server. If these settings are not updated, you will not be
able to use Web Services.
TIP: For additional help on setting up and using Web Services, visit www.hpconnected.com . (might not be
available in all countries/regions).
● If more than two hours have passed since you first turned on the printer and you have not set up the
printer wirelessly, place the printer in network setup mode by restoring the printer network settings. The
setup mode will last for two hours.
● You can also troubleshoot network connection issues by restoring the printer network settings.
CAUTION: If you restore the printer network settings, you will need to reconnect the printer to the
network.
To restore the printer network settings from the printer control panel
● Press (the Wireless button) and (the Cancel button) at the same time, and hold them for five
seconds.
To restore the printer factory settings or network settings from the embedded web server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 80.
3. Click Restore Defaults, and select the option to restore the factory default settings or network settings.
● While holding (the Power button), press and hold (the Black Copy button) and (the Resume
button) at the same time, until (spinning wheel) appears on the display.
WARNING! Before cleaning the printer, turn the printer off by pressing (the Power button), and unplug the
power cord from the electrical socket.
2. Clean the scanner glass and lid backing by using a soft, lint-free cloth that has been sprayed with a mild
glass cleaner.
CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners that contain abrasives,
acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl
alcohol because it can leave streaks on the scanner glass.
CAUTION: Do not spray the glass cleaner directly on the scanner glass. If too much glass cleaner is
applied, the cleaner could leak under the scanner glass and damage the scanner.
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case. Keep fluids away from the
interior of the printer, as well as from the printer control panel.
Drivers & downloads: Download software drivers and updates, as well as product manuals and documentation that
came in the box with your printer.
HP support forums: Visit HP Support Forums for answers to common questions and issues. You can view questions
posted by other HP customers, or sign in and post your own questions and comments.
Troubleshooting: Use HP online tools to detect your printer and find recommended solutions.
NOTE: You can also use the HP Smart app to check printer errors and get troubleshooting assistance. For
information about this app, see Use the HP Smart app to print, scan, and troubleshoot on page 18.
Contact HP
If you need help from an HP technical support representative to solve a problem, visit the Contact Support
website. The following contact options are available at no cost for in-warranty customers (HP agent-assisted
support for out-of warranty customers may require a fee):
This section provides regulatory and environmental information for the printer, as well as HP Company notices.
The information contained herein is subject to change without notice.
Visit www.support.hp.com to get user guides, troubleshooting help, and product support.
● To find environmental and regulatory information (including the European Union Regulatory Notice, North
America EMC, Wireless and Telecom statements, and other compliance statements), see the “Technical
information” section of the User Guide.
● To fix common printer problems, see the “Solve a problem” section of the User Guide.
● Specifications
● Regulatory notices
System requirements
● For information about future operating system releases and support, visit www.support.hp.com .
Environmental specifications
● In the presence of high electromagnetic fields, it is possible the output from the printer may be slightly
distorted
● HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise
due to potential high electromagnetic fields
● Envelopes: Up to 10
● Index cards: Up to 30
● Envelopes: Up to 10
● Index cards: Up to 30
● For a complete list of supported media, see the printer software or the embedded web server (EWS). To
open EWS, see Open the embedded web server on page 80.
Paper weights
Print specifications
● Print speeds vary according to the complexity of the document
Copy specifications
● Copy speeds vary according to the complexity of the document and model
Scan specifications
For more information about ppi resolution, see the scanner software.
● Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
Print resolution
Acoustic information
● If you have Internet access, you can access acoustic information from the HP website.
● Declaration of conformity
CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um
störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren
Gesichtsfeld platziert werden.
www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may
be found on the regulatory label.)
The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany.
EMF
● This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
If it incorporates a radio transmitting and receiving device that in normal use, a separation distance of 20
cm ensures that radio frequency exposure levels comply with EU requirements.
– This product operates on radio frequency between 2400 MHz and 2483.5 MHz, with a transmit power
of 20 dBm (100 mW) or less.
– This product operates on radio frequencies between 2400 MHz and 2483.5 MHz, and between 5170
MHz and 5710 MHz, with a transmit power of 20 dBm (100 mW) or less.
– CAUTION: IEEE 802.11x wireless LAN with 5.15-5.35 GHz frequency band is
restricted for indoor use only for all countries reflected in the matrix. Using this
WLAN application outdoor might lead to interference issues with existing radio
services.
Declaration of conformity
Declaration of conformity can be found at www.hp.eu/certificates.
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率
或變更設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改
善至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及
醫藥用電波輻射性電機設備之干擾。
Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.
WLAN Wi-Fi 802.11x (2,4 ГГц) 2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
Bluetooth з низьким енергоспоживанням (2,4 2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
ГГц)
Bluetooth (2,4 ГГц) 2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
WLAN Wi-Fi 802.11x (5 ГГц) 5150–5350 МГц < 100 мВт (20 дБм) ЕІВП
5470–5835 МГц
NOTE: Відповідні частотні діапазони та максимальна потужність передавання застосовуються, лише якщо
в пристрої використовується зазначена технологія підключення.
This radio communication equipment has the electromagnetic field strength in compliance with the Safety
Standard for the Use of Radio Communication Equipment on Human Health announced by the National
Telecommunications Commission.
For more information, visit HP's Commitment to the Environment Web site at:
www8.hp.com/us/en/hp-information/global-citizenship/index.html.
● Eco-Tips
● Paper
● Plastics
● Recycling program
● Power consumption
● Chemical substances
● EPEAT
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP Eco Solutions
website for more information on HP’s environmental initiatives.
Paper
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify
plastics for recycling purposes at the end of product life.
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions, and
partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by
reselling some of its most popular products. For more information regarding recycling of HP products, please
visit:
www.hp.com/recycle
www.hp.com/recycle
Power consumption
HP printing and imaging equipment marked with the ENERGY STAR® logo is certified by the U.S. Environmental
Protection Agency. The following mark will appear on ENERGY STAR certified imaging products:
Additional ENERGY STAR certified imaging product model information is listed at: www.hp.com/go/energystar
Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento
comercial ou rede de assistência técnica autorizada pela HP.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products as
needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/
reach.
根据中国《电器电子产品有害物质限制使用管理办法》
有害物质
外壳和托盘 ◯ ◯ ◯ ◯ ◯ ◯
电线 ◯ ◯ ◯ ◯ ◯ ◯
印刷电路板 X ◯ ◯ ◯ ◯ ◯
打印系统 X ◯ ◯ ◯ ◯ ◯
显示器 X ◯ ◯ ◯ ◯ ◯
喷墨打印机墨盒 ◯ ◯ ◯ ◯ ◯ ◯
驱动光盘 X ◯ ◯ ◯ ◯ ◯
扫描仪 X ◯ ◯ ◯ ◯ ◯
网络配件 X ◯ ◯ ◯ ◯ ◯
电池板 X ◯ ◯ ◯ ◯ ◯
自动双面打印系统 ◯ ◯ ◯ ◯ ◯ ◯
外部电源 X ◯ ◯ ◯ ◯ ◯
注:环保使用期限的参考标识取决于产品正常工作的温度和湿度等条件。
限用物質及其化學符號
列印引擎
— ◯ ◯ ◯ ◯ ◯
Print engine
外殼和紙匣
◯ ◯ ◯ ◯ ◯ ◯
External casing and trays
電源供應器
— ◯ ◯ ◯ ◯ ◯
Power supply
電線
◯ ◯ ◯ ◯ ◯ ◯
Cables
印刷電路板
— ◯ ◯ ◯ ◯ ◯
Print printed circuit board
控制面板
— ◯ ◯ ◯ ◯ ◯
Control panel
墨水匣
◯ ◯ ◯ ◯ ◯ ◯
Cartridge
掃描器組件
— ◯ ◯ ◯ ◯ ◯
Scanner assembly
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
reference percentage value of presence condition.
備考 2.〝◯〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: “◯” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of
presence.
備考 3.〝—〞係指該項限用物質為排除項目。
Note 3: “—” indicates that the restricted substance corresponds to the exemption.
若要存取產品的最新使用指南或手冊,請前往 www.support.hp.com。選取搜尋您的產品,然後依照 畫
面上的指示繼續執行。
To access the latest user guides or manuals for your product, go to www.support.hp.com. Select Find your
product, and then follow the onscreen instructions.
EPEAT
Most HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps
identify greener electronics equipment. For more information on EPEAT go to www.epeat.net. For information on
HP's EPEAT registered products go to www.hp.com/hpinfo/globalcitizenship/environment/pdf/epeat_printers.pdf.
如需长时间使用本产品或打印大量文件,请确保在通风良好的房间内使用。
如您需要确认本产品处于零能耗状态,请按下电源关闭按钮,并将插头从电源插座断开。
您可以使用再生纸,以减少资源耗费。
依据“复印机、打印机和传真机能源效率标识实施规则”,该打印机具有中国能效标识。标识上显示的能
效等级和操作模式值根据“复印机、打印机和传真机能效限定值及能效等级”标准(“GB 21521”)来确定
和计算。
1. 能效等级
2. 能效信息
喷墨打印机
– 操作模式功率
– 待机功率
待机状态是产品连接到电网电源上功率最低的状态。该状态可以延续无限长时间,且使用者
无法改变此状态下产品的功率。对于“成像设备”产品,“待机”状态通常相当于“关闭”状态,但
也可能相当于“准备”状态或者“睡眠”状态。该数据以瓦特 (W) 表示。
– 睡眠状态预设延迟时间
– 附加功能功率因子之和
标识上显示的能耗数据是根据典型配置测量得出的数据,此类配置包含登记备案的打印机依据复印
机、打印机和传真机能源效率标识实施规则所选的所有配置。因此,该特定产品型号的实际能耗可能
与标识上显示的数据有所不同。
This product contains a battery that is used to maintain data integrity of real time clock or product settings and is
designed to last the life of the product. Any attempt to service or replace this battery should be performed by a
qualified service technician.
This product's real-time clock battery or coin cell battery may contain perchlorate and may require special
handling when recycled or disposed of in California.
B N skew, troubleshoot
buttons, control panel 5 network connection print 92
wireless connection 71 software
C networks Webscan 52
clean view and print settings 77 specifications
exterior 113 system requirements 117
scanner glass 112 O status icons 6
control panel operating systems supported 117 system requirements 117
buttons 5
features 5 P T
status icons 6 paper technical information
copy clear jams 88 copy specifications 118
specifications 118 HP, order 16 environmental specifications 117
customer support skewed pages 92 print specifications 118
warranty 115 troubleshoot feeding 92 scan specifications 118
paper-feed problems, troubleshoot trays
E 92 clear paper jams 88
embedded web server power troubleshoot feeding 92
opening 80 troubleshoot 109 troubleshoot
Webscan 52 print multiple pages are picked 93
environment specifications 118 paper not picked up from tray 92
Environmental product troubleshoot 109 paper-feed problems 92
stewardship program 123 printer software (Windows) power 109
environmental specifications 117 opening 17 print 109
skewed pages 92
G R
glass, scanner recycle V
clean 112 ink cartridges 124 view
regulatory notices 119 network settings 77
J regulatory model identification
jams number 119 W
clear 88 wireless statements 120 warranty 115
Webscan 52
M S Windows
maintenance scan system requirements 117
clean 113 from Webscan 52
multi-feeds, troubleshoot 93 scan specifications 118
scanner glass
clean 112