UMA Advanced Technology Primer Sealer Bonder (White) : Technical Data XIM-03
UMA Advanced Technology Primer Sealer Bonder (White) : Technical Data XIM-03
UMA Advanced Technology Primer Sealer Bonder (White) : Technical Data XIM-03
MPI #17, E2, Green Certified, GPS-1* Dry and recoat times are based on 70ºF (21°C) and 50%
relative humidity. Allow more time at cooler temperatures.
.FEATURES . Thicker coats will take longer to dry. Dries to the touch in 30-
45 minutes and can be topcoated in 3 hours (will vary with
Excellent adhesion temperature). Allow 24 hours before applying two-component
Improved wet adhesion on hard, glossy surfaces paints. It will be fully cured in 7-10 days. It can be nib-sanded
Low temperature / high humidity application in 3 hours and lightly sanded after 24 hours.
Excellent leveling
Low odor & compatible with all top coat paints CLEAN-UP
. PRODUCT APPLICATION .
SURFACE PREPARATION
Surfaces must be clean, dry, sound, and free of dust, dirt, wax,
polish, grease, oil, chalk, loose paint and other contaminants.
The surface should be sound and stable. Clean with a strong
detergent, rinse and allow to thoroughly dry. For hard, glossy
surfaces, including pre-finished siding, clean with XIM GON™
or xylene. Do not use solvents that leave an oily residue such
as mineral spirits or turpentine. Scuff sand hard, glossy
surfaces for maximum adhesion. Mold and mildewed surfaces
should be cleaned with bleach, then thoroughly rinsed with
clean water and allowed to dry.
* Refer to the MPI website for the most current listing of MPI
certified products.
1 Form: GDH-717
Rev.: 012717
TECHNICAL DATA
.PHYSICAL PROPERTIES .
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.