Nothing Special   »   [go: up one dir, main page]

Double Break Disconnector 245kV Flyer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product leaflet

Double break disconnector 245kV – GW56


Maximum reliability and minimal maintenance

Double break disconnector type


GW56 is mainly used for outdoor
installations. It is particularly suitable
for substations with limited phase
distances and installations with low
vertical clearances.

Features
–– Designed and tested in accordance with latest
IEC specifications
–– Maintenance free contact system with spring to
provide reliable combining forces
–– Simple and reliable interlocking system
–– Easy installation and commissioning
–– Easy and convenient operation with motor
operating device
–– R emote operation possible with SCADA and
remote monitoring through GPS connectivity

Technical data – GW56


Disconnector without earth switch Units
Disconnector with one earth switch
Disconnector with two earth switch
Rated voltage kV 245
Rated current A Upto 4000
Rated peak withstand current
for disconnector and earth switch kA(peak) 125
Rated short time withstand current for 3 sec
for disconnector and earth switch kA(rms) 50
Rated power frequency withstand voltage at 50 Hz for 1 min
To earth and between phases kV(rms) 460
Across the isolating distance kV(rms) 530
Rated lightning impulse withstand voltage (1.2/50µs)
To earth and between phases kV 1050
Across the isolating distance kV 1200
Rated switching impulse withstand voltage
To earth and between phases kV -
Across the isolating distance kV -
Resistance of circuit µΩ ≤ 80
Radio interference voltage µV ≤ 2000
At voltage kV 156
Other values on request
Dimension – GW56
245kV
A 2300
B 2770

C 2900
D 3450
P Depend on the substation layout

1YVA000103 – Rev.A, en 2013-04 © Copyright 2013 ABB. All rights reserved.


All dimensions are in mm

For more information please contact: Note: We reserve the right to make technical changes or modify the contents of
this document without prior notice. With regard to purchase orders, the agreed
ABB High Voltage Switchgear Co. Ltd. Beijing particulars shall prevail. ABB does not accept any responsibility whatsoever for
No. 12 Jingyuan Street potential errors or possible lack of information in this document

Beijing Economic-Technological Development Area We reserve all rights in this document and in the subject matter and illustrations
Beijing, 100176, P.R. China contained therein. Any reproduction, disclosure to third parties or utilization
of its content - in whole or in parts - is forbidden without ABB’s prior written
Tel: +86 678 18000
consent.
Fax: +86 678 18006

www.abb.com.cn

You might also like