H 2 .

3
7 8 F R

APPROPRIATE TECHNOLOGIES FOR DEVELOPMENT

Freshwater Fish Pond

Culture & Management

f-2^J->8fX ^
 2?2-3

FRESHWATER FISH POND

CULTURE AND MANAGEMENT

by
Marilyn Chakroff,
PEACE CORPS

Illustrated by JOAN KOSTER

Edited by LAUREL DRUBEN

VITA

;,iSJ.:.

I n t . •:.-<•.

for ^oiiirf:;^;;;.- jifetsr ^~-'

AaiON/PEACE CORPS VOLUNTEERS IN TECHNICAL

PROGRAM 2 TRAINING JOURNAL ASSISTANCE
MANUAL SERIES NUMBER I B VITA PUBLICATIONS
MANUAL SERIES NUMBER 3EE

September, 1976
 FRKSHWATER FISH POND

CULTURE AND MANAGEMENT

Revised Edition December 1978

@ VITA, 1976
May be reproduced without
payment of royalty for offic-
ial U.S. Government purposes.
About this manual
FieAhuxUeA Flih Pond CuttuAe. and Management is the second 1n a series
of publications being prepared by the United States Peace Corps and
VITA, Volunteers in Technical Assistance. These publications combine
Peace Corps' practical field experiences with VITA'S technical expertise
in areas in which development workers have special difficulties finding
useful resource materials.

PEACE CORPS

Since 1961 Peace Corps Volunteers have worked at the grass roots level
in countries around the world in program areas such as agriculture,
public health, and education. Before beginning their two-year assign-
ments, Volunteers are given training in cross-cultural, technical,
and language skills. This training helps them to live and work closely
with the people of their host countries. It helps them, too, to
approach development problems with new ideas that make use of locally
available resources and are appropriate to the local cultures.
Recently Peace Corps established an Information Collection & Exchange
so that these Ideas developed during service in the field could be made
available to the wide range of development workers who might find them
useful. Materials from the field are now being collected, reviewed,
and classified in the Information Collection & Exchange system. The
most useful materials will be shared. The Information Collection 4
Exchange provides an important source of field-based research materials
for the production of how-to manuals such as Fizthuxtfe/L P-Uh Pcnd Cuttune.
and Management.

VITA

VITA people are also Volunteers who respond to requests for technical
assistance. In providing solutions, their aim is the most appropriate
answers for specific situations. Therefore, VITA specialists often must
produce new designs or adapt technologies so that they are of value
in developing areas.

Many VITA Volunteers have lived and worked abroad. Most VITA people now
work in the United States and other developed countries where they are
engineers, doctors, scientists, farmers, architects, writers, artists,
and so on. But they continue to work with people in other countries

(Hi)
through VITA. Thanks to their contributions of time and expertise, VITA
has been providing technical assistance to the Third World for more than
15 years.
Requests for technical assistance come to VITA from many nations. Each
request 1s sent to a Volunteer with the right skills. For example, a
question about fish pond operation might be sent to a VITA Volunteer who
has had years of experience working to develop fish ponds in Asia, and
who 1s now a university professor.

THE PURPOSE

T-ieAhwateA. fijih Pond CuJUwie and Management is a how-to manual. It 1s

designed as a working and teaching tool for extension agents. It is for
their use as they establish and/or maintain local fish pond operations.
The information is presented here to 1) facilitate technology transfer
and 2) provide a clear guide for warm water fish pond construction
and management. A valuable listing of resources at the end of this
manual will give further direction to those wishing more information
on various aspects of fish pond operation.

THE PEOPLE WHO PREPARED IT

The strength of both Peace Corps and VITA lies In Volunteers. These
manuals represent an excellent means of communicating Important know-
how gained through Volunteer experiences and Inputs.

The author of Ent&huxUeA f-Uk Pond Cu&twie and Management, Marilyn

Chakroff, served with Peace Corps in the Philippines for three years,
in a number of fisheries programs. Ms. Chakroff, who holds a B.S. in
Biology, now is an advanced degree candidate in the field of Environ-
mental Communication at the State University of New York, 1n Syracuse.
This manual is written out of her first-hand experiences as a Peace
Corps Volunteer.

Joan Koster, the Illustrator, has been a VITA Volunteer for more than 3
years. She 1s a teacher, professional artist, and writer. Ms. Koster,
who has travelled and studied in Greece for a number of years, currently
is preparing a manuscript on looms and weaving.

OTHER CONTRIBUTORS

Many thanks are due here to a number of people who aided the preparation
of this manual:

Dr. Peter Black, Dr. Robert Werner, Dr. David Hanselman — Faculty
of the College of Environmental Science and Forestry, State Univer-
sity of New York, Syracuse.

Dr. Shirley Crawford, Agricultural and Technical College, State Univer-

sity of New York, Morrisville.

(iv)
William McLamey, New Alchemy Institute, Woods Hole, Massachusetts.

A.F. D'Mello, Hawkesbury Agricultural College, New South Wales,

Australia.

Richard T. Carruthers, Bioproducts, Inc., Warrenton, Oregon.

Dr. William Ribelin, Department of Veterinary Science, University

of Wisconsin, Madison.
A special note of thanks is due John Goodell, VITA, for his layout work
and staff assistance with this manual.

REPLY FORM

For your convenience, a reply form has been provided here. Please
send it in and let us know how the manual has helped or can be made
more helpful. If the reply form is missing from your copy of the
manual, just put your comments, suggestions, descriptions of problems,
etc., on a piece of paper and send then to:

FISH POND CULTURE

3706 RHODE ISLAND AVENUE
MT. RAINIER, MD. 20822
U.S.A.

(v)
 PLEASE RETURN THIS FORM

NOTE TO THE USER: This manual was published because Peace Corps and
VITA workers and volunteers wish to help in a growing area of worldwide
interest. In order to provide the most effective help, the preparers
of the manual need to know how it is being used, or how you feel it could
better serve your needs. Please fill in the following form and return
it to:

FISH POND CULTURE

3706 RHODE ISLAND AVENUE
HT. RAINIER, MD 20822
U.S.A.

WHEN WE RECEIVE THIS FORM, WE WILL AUTOMATICALLY P U C E YOUR NAME ON A

MAILING LIST SO THAT YOU WILL RECEIVE:
. Updates and/or additions and corrections to the manual as
they become available.
. Notice of other publications which may be of Interest to you.
If you have questions on the material presented in the manual, or if
you run into problems Implementing the suggestions offered here, please
note them 1n the space provided. Use additional paper If you have to
in order to be as specific as you can about the problem. Wherever
possible, we will try to provide or direct you to an answer.

* * *

Date
Your Company or
Your Name Agency, if any

Your Address

1. How did you find out about the PC/VITA Freshwater Fish Pond Culture
and Management manual? How did you get your copy?

2. Which parts of the manual have you found most useful? Least useful?
Why?

(v11)
3. Did you find the manual easy to read, too simple or complex,
complete or incomplete?

4. How has this manual helped your work? What have you done to apply
the information?

Which plans have you used? Did you make changes in any of the plans?
(For example, when you were building a drainage system, did you
substitute any materials for the ones mentioned or change the design?)
If you made changes, please describe what you did that was different.
Include photos, sketches, etc., if possible or important.

6. Can you recommend additional methods or equipment which you feel

should be included 1n a new edition of the manual? If you do know
of such methods, etc., please include the information here.

7. What were your successes using the manual or implementing any of the
plans or procedures? Problems? Please describe completely.

Do you have other recommendations?

(viiD
 Table of Contents

ition Page

"About This Manual" iii

Reply Form vii
1 INTRODUCTION 1
2 PLANNING: THE SITE AND THE TYPE OF FISH FARM 11
3 PLANNING: SELECTION OF FISH 33
4 FISH POND CONSTRUCTION 53
5 PREPARING THE POND 79
6 MANAGING THE POND 107
7 HARVESTING THE POND 149
8 PRESERVING FISH 157
9 PROBLEMS OF FISH IN PONDS 165
0 OTHER METHODS OF FISH CULTURE 175
Glossary 181
Resources 185
Measurements Used 1n This Manual 191

(ix)
 I Introduction

What is Fish Culture?

Fish culture is the growing of fish in ponds. Growing fish in ponds,
from which they cannot escape, allows feeding, breeding, growing, and
harvesting the fish in a well-planned way.

Fish culture is one form of aquaculture. Aquaculture is the science

which deals with methods of growing (cultivating) animal and vegetable
life in water. Some other kinds of aquaculture are concerned with growing
frogs, oysters, seaweed, and even rice.
2

History of Fish Culture in Ponds

Growing fish in ponds is a very old practice. Carp were cultured as long
ago as 2698 B.C. in China, where they were grown 1n ponds on silkworm
farms. Fish culture seemed to occur whenever civilization was settled
for a long period of time. For example, fish culture was done in ancient
Egypt and in China, which has had a continuous civilization for over
4,000 years. The first written account of fish culture in ponds was by
Fan Lai, a Chinese fish fanner, 1n 475 B.C.
The ancient Romans introduced carp from Asia into Greece and Italy. By
the seventeenth century (1600's), carp culture was being done all over
Europe. A book written in England in 1600 by John Taverner gives the
details of good pond management and talks about growing the common carp.
Taverner also wrote about pond construction, fertilization and feeding.
Another book, written in 1865, gave the details of the stripping methods
of spawning fish. The methods of culturing common carp have not changed
very much since that time.

The common carp is still a very important pond fish. In addition,

today, other fish also are being cultured in ponds. Some of the most
well-known are fish of the tilapia genus, like Tltapia tuJotlca and
Titania moihamblca. Some of the other Chinese carps -- the silver, grass,
and bighead carps -- also are often used in pond culture. Most importantly,
countries all over the world are using time and money to discover which
of the fish commonly found in their own waters will grow well in fish
ponds.

Why Fish are Grown in Ponds

The practice of culturing fish in ponds developed because growing fish in
ponds is a more useful practice, for some purposes, than trying to catch
fish from lakes, rivers, or streams. For example:
. Many interested people discover that building a fish pond
close to home is possible and far more convenient than going
to the nearest market or river. Ponds can be built wherever
the soil, shape of the land, and water supply are right. This
may sound as if a lot of factors are involved. But since a
wide variety of soils, land shapes, and water supplies can be
used for pond culture, a fish pond can even be made from a
rice paddy or an unused grain field.

• It is easier to get fish out of a pond than it is to catch a

fish from a river or stream. Also, the number of fish taken
out of a pond can be controlled. But it is very difficult to
know how many fish can be caught in a river or stream or lake
at any one time. When the fanner goes to his f1sh pond to get
dinner, he knows he can take out the number of fish he needs
-- quickly and easily.
 3

Fish growth can be controlled. The fish can be fed extra

food to make them better for market; natural enemies can
be kept from killing the fish. For a person who relies on
fish for his food or his income, these are important factors.
The only fish grown in a pond are the ones the farmer
wants to grow. When he takes a fish out of hlspond, the
farmer knows what kind or kinds he will be getting. When
he catches fish in a lake,
stream, or river, many of the
fish will not be the ones that
are good to eat or to sell.

Growing fish in ponds allows

the fanner, or other fish
grower, to produce fish
cheaply, and to have a supply
of fish available on his own
land. Fish in ponds belong
to the pond owners; fish in
the rivers and lakes do not.

Why Growing Fish is Important

There are some very good reasons why a farmer or small land owner might
be interested in fish farming:
. Fish are an important food source.

. Fish farming can help a farmer make the best use of his land.
. Fish farming can provide extra income.

There may be additional reasons; you and the pond owners can determine
these from the local situation. The three points listed above are very
broad, however, and apply, at least in part, to most situations.
Therefore, each point is discussed more fully below.

FISH A S F O O D Farmers know that all living things need food, and that
without food, living things die. However, they are not as likely to know
the characteristics of food which make it valuable (or not) to the body.
Food is important because it provides proteins, vitamins, minerals, fats,
and carbohydrates. These things are called nutrients: they are materials
that the body must have to live and grow. Every kind of food has dif-
ferent amounts of each of these nutrients. For example, some foods
contain more protein; others have more fat than protein.
4

Because foods contain different amounts

of proteins, fats, and carbohydrates,
for example, 1t Is necessary to eat a
number of different kinds of food to
get the right amounts of each nutrient.
All the foods together then give the
body what 1t needs to grow.

The food that people eat is called

their diet. Eating the right kinds of
food -- foods that give the body the
right amounts of proteins, fats, etc.
— is called eating a balanced diet.
People who eat a balanced diet usually
are healthy and strong; people who do
not eat the right kinds of food are
more likely to be weak and get sick.

Proteins are the most important part of food. Protein is made of carbon,
hydrogen, and nitrogen. These are called elements. The combinations of
elements in protein make it the most useful nutrient. Foods that contain
a lot of protein are especially good for people to eat. And fish contains
a lot of protein.

The table on the opposite page shows a list of foods that humans eat.
The first number beside the food1 shows the number of grams of protein in
the food when it is fresh. The second number tells how many grams of
protein there are in food which has been dried. The table shows that
fish — whether fresh or dried -- is a very good source of protein.
(lOOgm of dried fish contains more protein than lOOgm of fresh fish only
because dried foods have water taken out. Therefore, lOOgm of fresh fish
weighs less when it is dried.)

If the farmers in your area already eat a lot of fish, or like fish, fish
farming for food may not be hard to introduce and have accepted.
If they do not eat fish often, you will have to keep this 1n mind when
you talk about fish as a healthy food. Food just may not be the most
Important reason, from their point of view, for wanting to grow fish.
 5

PROTEIN CONTENT OF FOODS*

Fresh, gms protein Dried, gms protein

Food per 100gm per 100 gm

FISH
Fatty (herring) 17 46
Non-fatty (haddock) 16 84

HEAT
Beef 20 67
Liver 20 67

DAIRY PRODUCTS
Milk 3.4 26
Eggs 12 46
CEREALS
Wheat 12 14
Maize 10 11
Oats 10 11
Rice 8 9
OIL SEEDS
Soya 33 37
Cottonseed 20 21
Sesame 21 22

GREEN LEAFY VEGETABLES

Cabbage 1.4 - 3.3 24
Spinach 2.3 - 5.5 26
ROOTS
Cassava (manioc) 0.7 2
Potatoes 2.1 9
Yams 2.1 7
Plaintains 1.0 3

* These values are estimates only; the amount

of protein varies according to the age, size,
and quality of the food, and how i t was
cooked and stored.

Sou/tee: kytwcuid and Jul (1975)

6

But there are other reasons you can offer a farmer. For example, a
farmer may consider cultivating fish 1f he realizes that fish are easy
to grow, cheaper than some kinds of meat, available as food all year
round, etc. You will have to see which combination of arguments works
best for getting farmers Interested.

B E T T E R L A N D USE Some farmers may be more Interested In fish farming

when they realize they can accomplish two purposes: provide a reliable
food supply and make the best possible use of their land.
"F1sh farming" is a good thing to call "fish culture" because It can
start the farmer thinking about raising fish with the same kind of plan-
ning and land-use management Ideas that he puts into raising crops.

Whether the farmer raises fish, crops, or animals, he is using his land
in certain ways. His aim in all cases 1s to increase the production of
food and the yield from the land. What farmers, and other people, often
do not realize 1s that fish culture can help get more out of the land.
Here are a few ways in which fish culture can help support and extend a
farmer's land use:

. Land gets tired when 1t 1s used for growing the same crop
year after year. These crops use up nutrients 1n soil, and
they begin to grow poorly. Fish ponds can be built on this
land and fertilized to provide food for the fish. After a
few years of fertilizing and growing fish, the soil Inside
the pond regains some of the nutrients used up by the grow-
ing of crops year after year. The land can then be used for
crops again.
. Some farmers own land that may not be very good for growing
crops: 1t 1s too sandy, for example. But there are ways of
building fish ponds in sandy soil. So the farmer would be
able to use land that was once not of much value to him.

. There are many ways that fish farming can fit Into the
farmer's plan for his land. The important thing is that all
of these ways help the farmer make the best use and get more
out of what he has -- readily, and often without much expense.
For example, a farmer who grows paddy rice can grow fish in
that paddy; fish ponds can be built as part of water supply
and Irrigation systems; vegetable scraps and animal manures
can be collected and used for fertilizing ponds. The fanner
should know that a farm with a fish pond or ponds can give
a total food yield that 1s higher than a farm with no fish
ponds.

The following diagram illustrates some of the ways 1n which the fish
pond fits into the farm: The same water source is used by both the
garden and the fish pond; the mud from the bottom of the pond makes
 7

good fertilizer for the garden; vegetable matter from the garden can be
used to fertilize fish ponds; manure from the animals can be used for the
pond and parts of fish can be used to feed animals; etc.

VEGETABLE
GARDEN

\MALS

FISH
POND

A D D E D I N C O M E Fish ponds can be quite small, or they can be large.

They can be made using expensive equipment and drainage systems, or they
can be dug using hand tools and drained by a bamboo pipe. F1sh can grow
successfully in both of these types of pond, as long as the ponds ire
managed correctly.

If the major reason for building the fish pond is to get increased and
better food for his family, a farmer certainly does not need fancy ponds
or expensive equipment. Fish ponds can be very inexpensive to keep.
Fish do not require fancy foods. Many ponds provide all the food the'
fish need. But besides the foods they find in the water itself, some fish
eat leafy garbage, mill sweepings, beer residues, spoiled grains, broken
rice, and many other waste products that might not otherwise be used.
 8

A farmer makes his Income go further by growing more of the family's

food and by selling leftover fish the family cannot eat.
Growing fish to sell can also be
very profitable. But the costs
Involved 1n getting started and 1n
maintaining the effort are greater:
If the farming 1s to be a solid
commercial enterprise, then more
ponds, more time, more money, and
nearby marketplaces are needed.
The business may or may not show
a profit right away; 1n fact, the
chances are that 1t will not. A
farmer might be better advised to
start small and work Into a bigger
enterprise slowly as he learns to
manage the art of growing fish 1n
ponds.

A Word about Cooperation

Often fish ponds are built by cooperatives. A cooperative is an organ-
ization of people 1n an area who come together to do something they could
not or would not do alone. In this way, four or five people or families
can pool their resources and build a fish pond operation together.
Sometimes an entire village will form a cooperative and will build and
operate a pond as a group. This kind of cooperation makes possible
better pond construction and management. A fish pond cooperative may be
a good way for a village to Improve the diet of the community and to sell
enough fish to maintain the enterprise. If the farmers in your area are
not interested in, or are concerned about, building ponds Individually,
a cooperative may be a very acceptable idea.

^iMM^
s-^^^^J&rf^?*
 9

Getting Ready to Plan a Fish Farm

A fanner or other person Interested In growing fish should read the
following 11st carefully before going further. The following factors
must be considered before the farmer builds his fish pond. Many pond
owners have small fish ponds that are only used for their own families,
but a farmer who sells fish must look for a market and a way to get his
fish to that market. It does no good to harvest fish which cannot be
sold or used by the farmer and his family.
. Is the soil able to hold water for a fish pond?
. Is there an adequate supply of water for a pond?
. Is the land a good shape for a fish pond?
. Is the pond area close to your home?
. Who owns the land where the pond will be built?
. Are there enough people to help build and harvest the pond?
. Can the equipment for building a pond be built, borrowed, or bought?
. Is there a marketplace nearby?
. Are there roads from the pond area to a market place?
. Are the roads passable even 1n the rainy season?
. Is there a good way to get the fish to market?
. Is there a vehicle available for transportation, if necessary?
. If there is no market nearby, or if it 1s hard to get to the
market, can the fish be kept by drying, smoking, or salting?
. Is there enough food for the pond fish?
. Are there fertilizers available?
. Do the people in the area like fish? Do they eat freshwater fish?
. Can the people in the area afford to buy the fish produced In the
pond?
If the farmer can answer yes to the questions which most fit his
situation, he has a good chance of having a successful fish pond.
But he must consider these factors. Each 1s discussed in detail in
the "Planning" sections.
A Planning: The Site and the
Type of Fish Farm

Before construction can begin, the fanner must look over his land to
choose the place or places where ponds can be built, and decide what
kind and how many to build. He must also decide on the kind of fish
culture he wants to do, and on the type of fish that he wants to raise.
He must look at his resources and his needs very carefully before he
actually begins building and operating a fish pond. This section will
give Information to guide the farmer 1n the Dlannlng of ponds and kind
of fish culture.

The Site
One of the most Important parts of planning 1s finding the right place
(selecting the site) for the pond. F1sh ponds use the land 1n a different
way from agricultural crops such as rice or wheat, but fish also are a
crop. And when a farmer builds a fish pond, he is choosing one use of
 12

his land Instead of some other use. If the site for the pond Is well-
chosen, the pond can be more productive than the land by Itself. But If
1t 1s not chosen well, the fanner may lose, or, at best, gain nothing
from his fish pond. When considering a site for the fish pond, the
farmer should remember and consider several points that were made In the
Introduction:
. Often poor agricultural land can be turned Into very good fish
ponds. In general, the better the soil of an area, the better
the fish pond. But this does not mean that a pond cannot be
built on poor land. It does mean that the farmer will have to
work harder to maintain the pond and the fish.
. If the pond 1s built on agricultural land which Is not producing
good crops, but the pond 1s cared for well, eventually the pond
bottom soil will become more fertile than 1t was before. If
this pond 1s a large one, after harvesting the fish, the pond
can be planted again with a land crop, like c o m , and allowed
to grow. Then when the corn 1s harvested, the land can be
turned back Into a fish pond. This means that a farmer can get
two good uses out of his land Instead of one poor crop.
. Other farmers may want to grow fish In rice paddles by digging
trenches around the edges of the paddy for fish to swim 1n.
This 1s another way of culturlng fish which will be discussed
in somewhat more detail later 1n the manual.
The point of the discussion above, 1s that a fish pond 1s Just one use
that a farmer's fields can have, and the choice of how the land can be
used Is important.
 13

There are three factors that work together to make a good site for a
fish pond:

. Water supply
. Soil
. Topography

W A T E R SUPPLY Water supply, soil, and topography all are Important,

but water supply 1s the most Important factor 1n selecting a site. F1sh
depend upon water for all their needs: fish need water 1n which to
breathe, to eat, and to grow and reproduce. If a site has water avail-
able year-round, that site meets Its first test easily. If water 1s not
available all the time but there 1s some way to store water -- 1n large
tanks, barrels or drums, in depressions, ponds, or wells ~ for use when
the natural water supply 1s low, then that site may still be all right.
The key, of course, 1s that water must be available at all times and 1n
good supply.
Where Can Water for F1sh Ponds Come From? Water used 1n ponds comes
from many sources:
. fbUniall. Some ponds, called "sky" ponds, rely only on rainfall
to fill their need for water.
. Kun-o££. Some ponds are gravel and sand pits which fill when
water from the surrounding land area runs Into them.
. UcUufuit uxxttxi. Host ponds are filled with water that comes
from natural springs or wells, or with water that has been
channelled (diverted) and brought in from streams, rivers,
or lakes.

. Sfoungt. Some ponds are built where there 1s a spring to supply

water. Spring water 1s water under the ground that has found a
way to get out. It leaves the ground and becomes a stream as 1t
flows away. Spring water 1s good for fish ponds because 1t 1s
usually clean (uncontaminated) and has no unwanted fish or fish

C/^'^^'r^a^K^^JWTER V ^ / a L , DRAIN
"//,. '///, ,„„„ '///,-^v
Pond bwitt uiing a ''"'--"//frs
ipxing at a uxtteA iouxce.
 14

eggs 1n It. If the water from a spring has travelled very far,
It may need to be filtered before 1t 1s used for a fish pond.
But filtering Is easy to do (see the "Construction" section)
and the Important fact 1s that the water supply 1s available.
. Dlzlli. The best source of water for a fish pond 1s well water.
Well water has few contaminants and, 1f the well 1s a good one,
the water 1s continuously available. Well water and spring
water, however, are both often low 1n oxygen content. F1sh
need to have oxygen 1n their water to live. Since this problem
is overcome easily (see water quality information in the section
on "Preparing the Pond") the major factor to be considered
here 1s an adequate water supply.
Most fish ponds use water that comes from a stream, river, or lake.
A diversion ditch or channel 1s dug between the water source and the
pond to take water from source to pond. This 1s a good way to fill a
pond because the water can be controlled easily. When the pond 1s full,
the channel can be blocked with a gate or a plug (see "Construction"
section), and the water will stop moving Into the pond.
There can be problems with this kind of water supply; for example, often
in tropical areas streams flood in the rainy season. This extra water
can be dangerous to the pond and must be diverted away from the pond by
a channel built for that purpose. IT IS BEST NOT TO CHOOSE A PLACE THAT
IS KNOWN TO FLOOD WHEN CHOOSING A WATER SUPPLY AND SITE FOR A POND. When
a pond floods, all the fish escape,and the pond is empty at harvest time.
If the water for the pond is being taken from a stream, lake, or river,
then the farmer should plan to filter the water carefully when filling
the pond. Water from these sources sometimes contains unwanted fish or
fish eggs. Filtering prevents these fish or eggs, and other harmful
animals, from entering the pond.
uality of the Water Supply. Finding an adequate water supply 1s the
irst step. Then the farmer has to check that supply to make sure It
can be used for a pond. This check of the water should Include:
. looking at the water, smelling 1t, and tasting it.
. looking to see 1f there Is a family upstream who take baths 1n
the water before 1t gets to the pond.
. making sure that there is no family or village downstream that
depends upon the source for their drinking water.
If the water supply seems all right, the farmer must also find the
answers to some other questions. Where the water comes from, how far 1t
travels to get to the site for the pond, and what kind of soil It travels
over will all affect the quality of the water. These questions and their
answers tell what must be done to make the water right for a pond:
 15

. Is the water very clear? Then the farmer may have to fertilize
the pond because there are not enough nutrients 1n the water.

. Is the water very muddy? Then 1t will have to settle before 1t

1s used 1n the pond: a special place will have to be made
where the mud can settle out of the water before the water
goes into the pond.

. Is the water a bright green? It probably has a lot of fish

food 1n 1t.

. Is the water a dark, smelly brown? It may have a d d in it,

and the farmer will have to add H m e to the water.

There are many things which can be done to make water good for a pond.
If the farmer knows his supply and the kind of water he has, he can
take the steps necessary to use his supply well.

SOIL The second Important part of site selection is the soil of the
area. The soil of the pond roust be able to hold water. It also con-
tributes to the fertility of the water because of the nutrients it
contains.

Ability of Soil to Hold Water. The best soil for a pond contains a lot
of clay. Clay soil holds water well. When a place with a good water
supply is found, the fanner must test the soil. He can tell a lot about
the soil simply by feeling 1t. If the soil feels gritty or rough to the
touch, 1t probably contains a lot of sand. If 1t feels smooth and
slippery, 1t probably means there 1s a lot of clay 1n it. This smooth
soil is good for a fish pond.

A very good way to tell if the soil is right for a fish

pond 1s to wet a handful of soil with just enough water
to make 1t damp.
 16

Then squeeze the soil.

If 1t holds Its shape when the farmer opens his hand, 1t will
be good for a pond. Remember, the more clay 1n the soil, the
better 1t 1s for building a pond.

If the soil 1s sandy, or does not contain much clay, the farmer can still
build a pond. There are ways of building ponds In these soils. But he
should be aware that building a fish pond In such soils requires more
effort and may not be as successful. Digging test holes will tell the
fanner what his soil 1s.
Larger ponds can be built 1n soils with clay. If the soil 1s rocky or has
shifting sand, etc., only small ponds are possible. If there are other
locations available, the farmer would be wise to see if there is another
place with soil better suited to the fish pond. More Information on soil
1s Included 1n the "Construction" section.
Ability of Soil to Provide Nutrients. Soil also contributes to the pond's
fertility. Fertility Is a measure of the nutrients 1n the pond, and 1t
simply refers to how much food there Is available 1n the pond for the
fish to eat. A very fertile pond 1s one which contains a lot of fish food.
 17

The soil of the pond contains some of these necessary nutrients -- like
Iron, calcium, and magnesium. In addition, however, soil also can contain
a d d s ; these substances often are harmful to fish. Whatever a soil has
in it 1s drawn Into the pond by the water and thus comes In contact with
the fish. Sometimes after a heavy rainstorm, there are big fish kills
1n new ponds. This happens because the heavy rain carries larger
amounts of acids from the soil Into the pond. So the farmer who 1s aware
of the kind of soil he has for his fish pond can prevent this problem
before 1t happens.
REMEMBER: One good Indicator of the quality of soil 1s whether It has
been used for growing crops. If crops grow well 1n that location, the
soil will probably be good for the fish pond. If crops did grow well
there before the nutrients were used up, then 1t will probably still be
free of harmful substances.

T O P O G R A P H Y The third factor 1n site selection 1s topography.

Topography 1s a word used to describe the shape of the land — whether
1t 1s flat or hilly, upland or lowland, etc. The topography of the land
determines the kinds of ponds which can be built. Ponds can be built In
valleys or on flat ground. They can be square or rectangular, or uneven
1n shape. They can be large or small. All of this 1s determined by
topography of the land, as well as by the farmer's requirements.
The most useful topography for fish ponds Is that which allows the fanner
to fill and drain ponds using gravity. Ponds built on a slope, for
example, can be drained easily. If ponds are located on flat land, the
pond must be built with a slope inside It so 1t can be drained by gravity,
or It will have to be drained using a pump.
Slope. If the farmer looks at a hillside, he can see that It rises. It
is higher at one point than at another. This difference In height, from
high to low point, 1s the slope of the land. In more scientific terms,
slope Is the relationship between the horizontal distance (length) and
the vertical distance (elevation) over a piece of land.
Slope Is usually written as a ratio (1:2) or as a percentage (5t). A
slope of 1:2 means that for every change In length of 2 meters, there Is
a change of 1 meter 1n height. A slope of 5% means that for every change
1n length of, say, 100cm, there 1s a change 1n height of 5cm. Pond
bottoms usually have a slope of 2-5%, whether they are on level ground
or 1n a hilly area. As long as the pond bottom has a slope, It can be
drained completely.
A farmer does not require a scientific understanding of slope to build
a pond. He does need to know how the shape of his land determines the
best place for building ponds. Ponds built In hilly places often are
made part of the hill. The picture on top of the next page, of a pond
with a spring as a water source, shows how the slope of the land has
been used to set up the pond's drainage system.
 18

In flatter areas, ponds are usually square or rectangular because 1t 1s

easier to use a harvesting net 1n ponds of these shapes.

The farmer will learn quickly to recognize by sight the slope that 1s
best for a pond. Because a slope 1s so Important, the first thing a
farmer should look for 1s a site with a slope and a water supply. If
he can use a natural slope for his pond, the pond will be cheaper and
easier to construct.
The best places to look for such combinations of slope and water supply
are where water collects from streams and flows through the valley at
the bottom of a slope. If the pond 1s built on the slope above the
water flow, water drained from the pond can flow directly into the stream.
Water might be brought to the pond 1n a number of ways depending upon the
situation -- by streams running down the slope upon which the pond is
situated, for example. Another good place to look for a good combination
of slope and water supply is on plains or flattish ground between hills.
These plains often receive water from brooks or streams.

There are many possibilities. The important thing is that the fanner
look for a topography that makes fish farming as easy and as successful
as possible.

The Type of Fish Farm

After the farmer has found a site or sites for his fish pond, he must
consider what kinds of fish culture are possible in the space he has
available. He also must decide what his resources will allow him to
get started. This planning 1s necessary because the answers will
determine the number of fish ponds the farmer builds and the kind of
fish he will want to culture. The following pages present a range of
ideas concerning the kinds of fish farm operations (raising fish or
breeding fish); the types of pond used 1n fish culture; fish culture in
one or several ponds; advantages of small and large ponds; and mixing
or separating fish types and sexes. A discussion of these subjects will
provide the farmer with the background he needs to decide what kind of
fish farm is possible for him, given his resources and the kind of fish he
wants to raise.
 19

A N O T E OF CAUTION Before a farmer even begins, however, it Is impor-

tant for him to Include 1n his planning the fact that some fish will die.
This 1s an extremely Important fact for the f1rst-t1me fish grower to
understand. It 1s very natural for some fish, the weaker fish, to die 1n
ponds. As long as fish are protected 1n ponds and are well taken care of,
fewer fish will die 1n ponds than would die 1n natural waters. But a
farmer who does not expect some death may get discouraged and give up
before he has given his pond a chance to work. It 1s never too early to
Introduce this Idea.

KINDS OF FISH FARM OPERATION In nature, many fish never reach

adult size because they are eaten by other animals (predators), or they
die from disease or lack of oxygen. In fish culture, the farmer tries
to control the pond situation in order to produce more fish. In ponds,
predators and so on can be controlled so that the pond yields more fish
per hectare than do natural waters.
There are two major kinds of fish farms — those which breed fish and
raise the fry, and those which rear fry and fingerllngs (the young fish)
to market size. So the farmer, after finding possible sites, etc., must
decide if he 1s going to breed his fish and raise the fry. Or if he is
going to buy fry and fingerllngs and rear them to market size, not
getting involved 1n breeding.
Breeding fish requires more time and more ponds than simply rearing
fingerllngs. And building more ponds can be more expensive and require
more ongoing management. So the farmer must finally determine his reason
for raising fish: to eat; to sell; to use his land better; or all of
these. He will have to have all these things firmly 1n mind so that he
can:
. build the right kinds of pond.
. build the right number of ponds.
. stock the right kinds of fish.

T Y P E S OF P O N D S The types of pond a farmer can build depend on water

supply, soil, and topography, the factors which were just discussed. The
two types of pond most often built are barrage ponds and diversion ponds.
Many aspects of the construction of these ponds are the same. The main
difference between these two types of pond 1s the water source.
Barrage Ponds. These ponds are usually filled by rainfall or by spring
water. A spring, for example, sends water flowing through a small valley
or down a slope into a low place. Or a spring bubbles from the ground
into a natural depression. The pond 1s formed by collecting water at the
base of the valley and 1n the low places. The farmer does this by build-
ing a wall (dam) which holds the water inside what now 1s the pond area.
The wall keeps the water from entering and leaving except as needed.
 20

The number of pond walls the farmer must construct depends upon the land
and on how he fixes his drainage system. A barrage pond usually needs
only one wall -- the main wall between the water source and the pond area.
One kind of drainage system called a sluice (see "Construction" section)
can be used to let water both in and out of the pond. There are also a
number of simple drainage systems which can be used that do not require
any complicated construction.
Barrage ponds should not be built where the flow of water 1s too great:
1t 1s difficult to keep the water from breaking down the wall 1f the
pressure of the water 1s too great. Brooks and streams which flow well,
but not too strongly, make good sources for barrage ponds.
Even when the flow of water Is not great, however, barrage ponds require
overflow channels. Because barrage ponds are usually built in low areas,
they are likely to fill up 1n heavy rains. Overflow channels are any
kind of system which can be set up to stop the pond from collecting too
much water. The overflow takes extra water away from the pond. If this
extra water 1s not taken out, the pond wall may break. Therefore, the
overflow system is needed to help the drainage system handle the flow of
Water when there 1s too much water in the pond.
 21

The overflow system can be wide grooves cut Into the top of the wall
toward the ends away from the middle; 1t can be large hollow tree trunks
which are set Into the tops of the wall and work as pipes to drain the
water Into ditches, or even to carry the water Into storage areas for use
later when the water supply 1s low. Another kind of overflow can be
ditches, dug Into the ground above pond level, which take the extra water
away when the water rises to that level.
An overflow often 1s not screened, because 1f something large catches
on U , the pressure of the water behind 1t might cause the entire wall to
break. This fact results 1n a loss of fish at time of flooding.

^.i^Pil^'V^//////
OVERFLOW
DITCH %
6- SCREEN
f
f WATER
INLET
#
DRAMGE
DITCH ^//////////ill/nl/nilwM HIIII*^

Diversion Ponds. These ponds are made by bringing (diverting) water fros
another source like a stream or river. Channels are dug to carry the
water from the water source to the pond.
 22

Diversion ponds can be made In a number of ways. Sometimes a pond 1s

dug 1n flat ground or can be made by slightly enlarging a natural depres-
sion In the land.
These ponds, like the barrage ponds, require walls depending upon the
topography of the land, the drainage system used, etc. A pond dug In
flat ground often requires four walls; a pond built In a natural depres-
sion may not.
With a diversion pond, the water 1s always brought to the pond Instead
of running directly Into the pond. Water can be diverted In a number
of ways. For example, a small stream which gets Its water from a larger
stream nearby can be dammed and used as a diversion channel to feed a
pond. Or water can be diverted to a pond from an Irrigation ditch which
carries water to agricultural crops from a nearby well or lake.
A farmer may have one diversion pond, or 1f his space allows and the
water supply 1s sufficient, he may have several. When a series of di-
version ponds 1s built, they are built 1n one of two ways:
. RoiaAy ty&tem. These ponds are built one after another In a
string. In this system, all the ponds drain Into each other
and must be managed as If they were one pond. Therefore, 1f
the first pond 1n the series (the pond with the water Inlet)
1s full of predators which must be poisoned, all the other
ponds In the system have to be harvested (have the fish taken
out) and drained before the first pond can be poisoned and

. PaAatltZ Astern. In this series, each pond has Its own Inlet
and outlet. Therefore, each pond can be managed as a separate
pond.
 23

Each kind of pond Is going to have advantages or disadvantages depending

upon the farmer's situation. A parallel system of diversion ponds, 1n
most cases, is a better system. But rosary systems are cheaper and
easier to build, and therefore, more possible for some farmers to under-
take. Also, 1f the water source is good, and can be kept free of preda-
tors and unwanted fish, and 1f the management of the pond 1s done well,
a rosary system can be very successful.

Diversion ponds are often better than barrage ponds because they are less
likely to overflow, and the water source 1s often more dependable through-
out the year. But barrage ponds require less construction and are likely
to be cheaper. In addition, for some farmers, barrage ponds are the best,
and perhaps the only, way for them to use their land for fish ponds.
The art of constructing and planning a fish pond or fish operation 1s
very much an Individual thing. There are basic ways of using resources,
for example, land and water sources. But the exact shape and type of
fish pond must be decided by the farmer for his situation. There are
many ways of making fish ponds which will work, and the "right" way for
any given farmer 1s the way which works best for him. Many aspects of
fish farming are determined by experimenting with pond operation, but
much can be done by good planning before fish pond construction.

Therefore, the farmer must look at his sites and consider the types of
ponds he can build from the viewpoint of the number, size, and depth of
the ponds he 1s going to need. If, for example, the farmer thinks he
has a good area for a diversion pond, but hits solid rock at lm and needs
a pond 2m deep, he can find this out before he Invests a great deal of
time and money. If he has room for two small diversion ponds and a
barrage pond, or for a large diversion pond and a barrage pond, he can
base his decision on what kind of pond to build upon the number, size,
and depth of pond he needs for what he will be doing.

The Number of Ponds. The number of ponds depends on the possible sites
and on what the farmer plans to do with his fish ponds. If he is going
to raise fingerlings to market size, he will need one or a few "rearing"
ponds. If a farmer plans a larger operation in which he will breed fish
for the eggs and fry, he will need space for nursery pond, rearing pond,
and a pond for brood stock. Nursery ponds can hold eggs and fry until
they are fingerling size; rearing ponds hold the fingerlings until they
are market size; brood ponds hold the fish to be used for breeding.

It 1s possible to breed fish 1n a corner of a large, single pond, and a

farmer interested in raising fish for his own use may want to do this.
But a farmer interested 1n marketing fish probably will want at least
two large ponds. If he has two medium-large ponds, he can use one for
rearing fingerlings and one for broodstock. Eggs and fry can be taken
care of 1n very small ponds or even containers.

The Size of Ponds. The size of ponds depends upon the same factors —
topography, water supply, and need. Nursery ponds usually are smaller
than rearing ponds because the fry are very small. The size of nursery
 24

ponds depends on the fish species being cultured. In fact, eggs and fry
can even be kept 1n washtubs, oil drums or any other such container which
holds enough water for the number of fry and 1s supplied with enough
oxygen.

As the fish grow, they need more space. So rearing ponds are usually
bigger than nursery ponds, and brood ponds are bigger than rearing ponds.
Sometimes a farmer will have to choose between one large pond or several
smaller ponds. His site would allow him to decide either way.
Here are some advantages of small and large ponds:
Smalt Vondi: . harvest easily and quickly
. drain and refill quickly
. treat for disease easily
. are not eroded by wind easily
laAQi Vondb-- . cost less to build per hectare of water
. take up less space per hectare of water
 25

. have more oxygen 1n the water

. can be rotated with rice or other crops

For most farmers, a few small ponds are better than one or two large
ponds. Fanners must also manage their agricultural crops, and 1t 1s
difficult for them to manage large ponds. Also, most farmers just do
not have a lot of land. A good size for a single fish pond 1s probably
between 1 and 5 ares (100 and 500m 2 ).

Farmers are going to be roost Interested 1n working the fish pond Into an
already going farm as simply and easily as possible. This 1s why
culturlng fish 1n rice paddles 1s popular 1n some areas. In fact, fish
ponds can be set up 1n almost any area where a rice paddy can be located
— even on steep hillsides.

Small ponds are easier to care for and construct. As a farmer gains
experience, he can go on and build larger ponds. Starting small 1s a
good Idea until the farmer feels he knows what he 1s doing and 1s successful.

Depth of Ponds. The depth of ponds depends upon the fish being grown.
F1sh species like different kinds of food, and the depth of the ponds
affects the kinds of food produced by the pond. A common carp, for
Instance, eats worms and other bottom organisms and must have a pond
that 1s not deeper than 2m. But when the carp are fry, they eat only
plankton, the tiny free-floating plants and animals suspended throughout
the water. So nursery ponds for carp fry are often only 0.5m deep.
(As mentioned before, eggs and fry can be taken care of In almost any
container which holds enough water and has enough oxygen.)

Other fish feed at other levels 1n the ponds depending on their life
stage and on their own food preferences. A very deep pond will not
produce as much food because the sunlight cannot light the water below
a certain depth,and the plankton will not be able to make oxygen for the
fish (see water quality). On the other hand, a very shallow pond might
be turbid, covered by water plants easily, and become very hot. Host
pond owners make sure that the water depth at the edges of the pond 1s
at least 75cm to discourage water plants. It Is best 1f the pond Is
about 75cm deep at the shallow end and up to 2m deep at the deepest end.
This will give the best results with most pond fish.

T H E O N E - P O N D OPERATION If the farmer's site can only have one

pond, his decision 1s easy. It 1s hard to breed fish when only one pond
1s available. Usually a single pond Is used only for rearing fish from
fry or flngerllngs to market size. This Is the case In small, backyard
fish ponds that are used to supply fish for only one family. A good
minimum size for such a pond 1s 15m2 1n area and lm deep. A smaller
pond would probably not be worth the effort to build and maintain.
A single pond 1s stocked with the fry or flngerllngs. For example, a
pond of the size mentioned above could be stocked with 60 flngerllngs.
These young fish are cared for until they reach adult size. Then the
 26

pond 1s harvested (the fish are taken out). The pond area can then be
prepared for a new batch of fish and stocked again.
One pond can provide a good food source for the family. However, rearing
fish means that somewhere there must be a source of fry or flngerllngs
for use 1n the pond. The farmer must check his area carefully, so that
he 1s sure the young fish are available Before he builds one pond.
The source can be a river where he collects the young fish, or a local
fish farm which breeds fish to supply fanners who have small ponds, or a
government hatchery where the farmer can buy the young fish. If the
farmer decides that he wants to breed fish 1n his pond, It Is possible
to breed some fish Inside small nets placed 1n the pond. A single pond,
though, 1s usually used Just for rearing fry or flngerllngs to a good
size for food and market.
While one pond usually means that the farmer Is wise to concentrate on
raising one batch of fish from fry or flngerllngs to market size, he
still must decide what kind or kinds of fish he will raise In his pond.
He can raise one kind of fish alone (monoculture), or he can raise
several kinds together (polyculture).

M O N O C U L T U R E Monoculture Is the culture of only one species (kind) of

fish In a pond. It can be tllapla of one species, common carp, or any
other single fish species.
Monoculture has some advantages. One advantage 1s 1n Intensive fish
culture practices, where fish are fed a lot of supplementary foods for
fast growth. It 1s easier to give these foods 1f there Is only one type
of fish In the pond. Another possible advantage 1s that monoculture
gives greater control over the age and sex of the fish. In monocultures,
fish can be of all different ages and life stages, or they can be
separated Into fry, flngerllngs or brood stock.
 27

^
<C3
<cffi^ ^ -c£P ?~ <©*
^ — 4^
;-- <s>»

<S^
vS**"" 7 ""*^^
-

. = •
t»
Krl
MIXED A&ES SEPARATED bY A»B.

A monoculture allows a farmer who 1s unfamiliar with fish faming to get

to know his one type of fish very well. And there 1s some advantage to
this.
One disadvantage of a monoculture
pond Is that 1t is more likely
for a single disease or parasite
to kill all fish In the pond.
Different fish are susceptible
to different diseases. If only
one fish type 1s present In the
pond, a bad fish disease could
easily infect and kill all the
fish 1f 1t were not stopped In
time.

In monoculture ponds, fish are harves-

ted selectively by using nets which
have meshes of different sizes. For —y£*2<£<
example, 1f the farmer wishes to
harvest larger fish for market or
breeding, the net will not catch or
hurt the fry or flngerllngs, because
they are too small to be caught by --/^p^^
a large-mesh gill net. This allows
the farmer to keep his pond In
operation and producing fish for & "•• - f
food all year.

SULECTIVt HARVESTING
28

Monoculture Is the most common kind of pond culture. For a small fish
farmer who Is most Interested 1n having a nearby, year-round supply of
protein (and who does not have a lot of time or Interest to give to the
pond), a monoculture may be a very good Idea.

POLYCULTURE

Polyculture 1s the culture of two or more fish species together 1n a

pond. A good polyculture uses the natural food sources 1n a pond better:
1f the polyculture 1s mixed correctly, each of the species eats a
different food from the pond.

Polycultures are more

resistant to disease.
Disease, 1f present,
usually attacks the
smaller, weaker fish,
and the healthier fish
continue to live and
grow.

ft
F1sh stocked 1n a polyculture must be able to live together. And living
together successfully means that the fish put Into the pond together do
not all ne«d to eat the same food. A polyculture can have fish of any
size or age — as long as a balanced relationship 1s maintained.
Some examples of polycultures are:
. flngerllngs of two or more species stocked together 1n a
fertilized pond and left to grow. A good mixture In this
 29

kind of polyculture 1s a mixture of Chinese carp — silver,

grass, and blghead carp stocked together. The silver carp
eats phytopiankton; the grass carp eats pond vegetation;
the blghead carp eats zooplankton.

MIXED CKRPFINGEHUN&S TIIAPIA FiN&ERUNGS * C M T I S H

A few large fish (brood size) are stocked with flngerllngs

of another species 1n a pond and left alone. A good example
of this Is stocking tllapla flngerllngs together with a few
adult-sized CtcuUcu catfish. The catfish feed on bottom
organisms and serve as a population control on the fry that
are produced 1n the tllapla ponds. Since one of the problems
which can be associated with culturlng tllapla 1s overpopulation,
this 1s a very complementary relationship.
 30

Another example of this type of polyculture Is a stocking

of any kind of flngerllngs mixed with a few large grass
carp for weed control.

A iaAmeA moi-t be
aaAciul to avoid
the. ptoblem o{,
£l6h competing ioK
iood when he plani
a polycultuAe..

Polyculture 1s a good way to use a pond, especially 1f there is only one

pond to use. A careful examination of local fish and their habits should
tell a farmer what kinds of polycultures are possible in his pond. The
Important thing to remember is that the fish must not compete with each
other. If stocked and managed correctly, polyculture ponds can give
maximum production to a fish fanner. In very practical terms, the fanner
could raise as much as three times more fish 1n a polyculture of three
species than he can raise in a monoculture pond of the same size.

M O N O S E X C U L T U R E A word should be said about monosex culture, even

though few farmers will choose or be able to choose this way of operation.
Monosex culture means growing only one sex of one species of fish in a
pond. When only males or only females are stocked in a pond, all the
energy of a fish goes into growth and not Into reproduction.
An all-male stocking has faster growth rates than a mixed stock of males
and females. So some farmers try to stock only males or females 1n a
pond. One fish species that often is used in monosex culture is tllapia.
Tllapia reproduce at a very small size, but when separated by sex, they
do not develop their reproductive organs, yet continue to grow.
One way to stock a monosex pond 1s to separate the fish one by one
according to sex during the breeding season. Often, at this time, fish
change color, and it is easier to sort fish by sex. Then the fish can
be grown to a larger size.
In another method, people have been trying to obtain fish of all one sex
by putting two different species of tllapia Into a pond. When these fish
breed, they produce either a monosex culture or a sterile hybrid. Three
crosses do now produce 1001 male offspring.
 31

Crosses of THapja which Produce lOOt Male Offspring:

MALE CROSSED WITH FEMALE

Tilapca. macjwckui X MJjxpia. niXctita.
T-tt&pia. moi&ambica. X Tttapia rutotica
TiLapia hcuiium X Tilapia. mohiambiaoi

There are no crosses that produce 1001 female offspring as yet. Males
are preferred because they continue to grow during the breeding season,
when there are no females present — even though they (the males) continue
to build their nests 1n preparation for mating.
Monosex culture 1s a valuable method of pond culture, but 1s usually
difficult to do: the hybrid crosses are very new; hand-sorting fish by
sex causes many of the fish to die from stress. Even 1f the fish are
sorted without stressing them, one fish of the opposite sex that
accidentally finds Its way Into the pond can ruin the whole monosex
culture. So monosex culture 1s generally not practiced by small-scale
fish farmers.

T H E M O R E T H A N - O N E - P O N D OPERATION A farmer who has a larger

area to work with might wish to consider having two or three small ponds.
Perhaps two ponds would be diversion ponds, and the third, a barrage
pond fed by a spring. Perhaps the farmer has room for only two barrage
ponds. He does not want to keep eggs and fry 1n the ponds because 1t 1s
harder to protect eggs and fry 1n barrage ponds. This does not mean he
cannot breed fish. He can keep eggs and fry 1n an oil drum, washtub,
or anything else .as long as the water 1s clean and contains plenty of
oxygen.
With three ponds, one pond can be the rearing pond 1n which flngerllngs
are raised to market size; one can be used to keep brood stock; and the
third, and perhaps the smallest, can be used as a nursery pond where the
eggs hatch and the fry grow to flngerllng size. If the farmer dots not
plan to breed fish, then he can use all three ponds as rearing ponds.
He should not do this, however, without thinking ahead to the harvest
and making plans for marketing the fish he will grow, or preserving the
fish for sale or use later.
 32

The major difference between a large farm operation and a small one nay
be only the number of ponds. Three ponds 1s enough to have a full-fledged
operating fish farm which Includes breeding, selling fry and flngerllngs
to other farmers, and raising fry and flngerllngs to market and brood
size. Once the farmer 1s a skilled pond manager, these ponds should do
well and provide a good return on his Investment.
Until the farmer 1s experienced, however, 1t Is better for him to start
with small efforts and a smaller operation. Small pond failure Is not as
severe. Once the ponds are working well, the farmer can expand and build
more and/or larger ponds. But he should be encouraged to start small.
There are a lot of factors 1n fish pond management that are learned best
by experience. But a bad experience will discourage, rather than encourage,
the pond owner.

A FINAL W O R D O N PLANNING P O N D S Good planning 1s a must for a

successful fish pond operation. It 1s during the planning process,
before any money or a lot of time and energy 1s spent, that many problems
can be solved.
The farmer should keep 1n mind while planning that ponds do not have to
have expensive equipment In order to work well. Far more important than
the equipment are 1) an understanding of the general principles Involved,
2) the selection of a fish or fishes that will do well 1n his pond (see
next section, "Selection of Fish"), and 3) good dally management of the
pond (see section 6, "Managing the Pond").
%5 Planning: Selection of Fish

The fanner now has a firm idea of his site and the types of ponds it is
possible for him to build. He also should know what he wants to do with
his ponds — raise fish for food or run a fish-marketing business. Now
he must consider very carefully what type or types of fish he is going
to raise In his ponds. The success of the pond depends upon choosing
the fish that will grow best 1n the type of ponds and conditions that a
farmer 1s planning.
The following pages give some: 1) general Information on characteristics
of fish, and 2) detail about certain fish which have proved to be good
pond fish and why. This information should serve as a guide to a fanner
trying to decide which fish will do best in his ponds.

Characteristics of Fish
The major body parts of all fish perform the same functions, and they
are located 1n about the same places on any different fish's body. But
the size, shape, and color are often different, and these differences
help tell the fish apart. Knowing how a healthy fish looks is Important.

All fish have a tail consisting of the caudal peduncle, and the caudal
i-in. The fish's fins help 1t steer through the water and hold it
upright in the water. Often a sick fish cannot steer or flops over on
Its side. Other fins on the body include:

. VecAonal — usually located on the sides of the fish behind

the head.

. Pelvic — usually located towards the rear of the body where

the hips would be 1f the fish were a four-legged animal.

. Votial — runs along the top of the fish. May be single or

double. The second dorsal fin is sometimes called the-so^t doA^al
&ln.
 34

DORSAL FIN

EYE LATERAL LINE SCALES

NOSTRILvV' $atf*^*^ty
MOULT H ^X^i
CHEEK
OPERCULUM Y ^ ^ i g m \ CAUDAL FIN
PELVIC Fl VNALVENTX VAUDAL PEDUNCLE
PECTORAL FIN ANAL FIN

Paitf* o& ikz CUapia., one. o£ ikt but o$ ttitzd pond iiik

. Anal — usually located right behind the awl vint (anus) on

the rear bottom end of the f i s h .
All f i s h have ej/ei and gi£Zt. The g i l l s are covered by a flap called the
opvicxilwn. F1sh can see, but they cannot see very w e l l . The g i l l s are
extremely important. Fish take in water through their mouths. The
water i s then passed through the g i l l s which remove the oxygen and
nutrients from the water. The water 1s then passed outside of the body
of the f i s h through the g i l l s l i t s .
I t 1s possible to t e l l a l o t about a f i s h ' s health and eating habits by
looking at i t s g i l l s . Fish with many, many feathery g i l l rakers and
few i f any teeth eat the smaller foods in the pond. Fish with few and
larger g i l l filaments eat the larger particles from the pond. Healthy
g i l l s are a bright red color. I f the farmer sees f i s h with g i l l s that
do not have t h i s healthy red color, or have white spots a l l over, for
example, he w i l l know that f i s h is not healthy and should not be bought
or placed in his pond. Or i f the f i s h is already in his pond, he knows
he must take steps to get r i d of the disease before i t troubles more f i s h .

Other identifying parts that a l l fish have are the mouth, the qznliol
apznJjngA (to reproductive organs), and the bxXsjinJl tine.. The lateral line
is a small l i n e of nerve cells which runs along the length of the body
about midway on the side of the body. Sometimes the lateral line is
covered by a layer of scales; sometimes i t is a different color than the
rest of the body. In any case, the lateral line is an area of sensitivity
that helps the f i s h feel pressure and temperature changes in the water
around i t .
 35

Some fish, like catfish, also have batbeis, small projections that hang
down from the sides of the mouth. Barbels help the catfish sense Its
surroundings, find food,and attract small fish to the catfish so that
1t can eat them.

When a farmer breeds fish he will want to be able to tell the difference
between male and female fish. This can be difficult with some fish.
However, some fish change color 1n the breeding season (tilapia, for
example), so they are easy to identify by sex. Some fish can be classi-
fied according to the color and size of their genitals. The separation
of fish by sex is best learned by actual experience in the pond.

Sex Mganb of, tltapla

FEMALE GENITAL URETER

PAPILLA
36

When the farmer goes to buy fish, he must already know what healthy fish
look like. I t 1s very Important that he be as familiar as possible with
each of the fish he decides to raise. He must know the characteristics
of that fish and Its l i f e cycle, Its eating and breeding habits, etc.
The farmer who begins any fish pond enterprise without having this kind
of Information 1s Inviting failure. And 1f 1t 1s a new venture, 1t 1s
particularly Important that the fanner's f i r s t effort be as successful
as possible.

The Life Cycle of Fish

F1sh start H f e as fertilized eggs. The eggs grow and then hatch Into
small fish, called fry. The fry are attached to the yolk sac which 1s
the leftover part of the egg they hatched from. The yolk sac provides
food for the fry during the first few days after hatching.

After the yolk sac 1s gone, the fry searches for food 1n the water. All
fry eat the tiny suspended and swimming plants and animals called plank-
ton 1n the water. Plankton are hard to see, but If a farmer puts some
of his pond water Into a glass container and holds It up to the light so
that the light shines through the water, he can see the tiny plankton
floating 1n the water. The length of the fry stage depends upon the
species of fish. Usually a fish 1s a fry at least until the yolk sac 1s
absorbed. Fry range from 2mm to 30mm 1n length. This growth process can
take 2 to 6 or 8 days depending upon the type of fish.
 37

As the fry grow bigger, they are called flngerllngs. They are called
fingerlings because at this stage of the growth cycle, they are about the
size of a person's finger. Flngerllngs vary 1n size -- from 4-10cm.
Above 10cm, the fish 1s better called a post-f1nger!1ng. The adult fish
ranges 1n size; some can be as large as 2m long and weigh 22kg. An adult
fish 1s a fish which 1s sexually mature.

Fingerlings have different eating habits from fry; they are now much
bigger and can eat larger pieces of food. As flngerllngs, the fish begin
to show that they like certain foods better than other foods. Each kind
of fish chooses Its own kind of food, depending upon his needs and what
1s available. For example, a carp fry will eat plankton; as a flngerling,
the carp eats pieces of decayed matter and Insect larvae; as an adult
the carp will eat plankton, decayed matter, Insect larvae, worms, snails,
and almost anything that 1s on the bottom of the pond. Common carp, for
example, are called "bottom feeders," because they eat food from the bot-
tom of the pond.

The food preference does not always

change as the fish grows. Some fish,
like the silver carp, eat plankton
their whole lives. When the fish
reach adult size, they will sexually
mature 1n the right conditions.
Brood fish are sexually mature fish
which are chosen as good fish to
breed (spawn), produce eggs and
begin the whole cycle again. This
is called the H f e cycle of a fish.

Knowing how the fish 1n the pond

grow, and the foods they require at
each stage 1n the H f e cycle, 1s very
Important for good pond management.

Choosing Pond Fish

Choosing fish to grow 1n ponds can be difficult. A good pond fish has
certain characteristics which help it grow successfully 1n ponds. There
are some fish which will not adapt to pond conditions and cannot be used
1n pond culture. A pond 1s very different from a natural waterway:

. There 1s usually no water flowing through a pond. Some fish

need to live where there 1s quite a bit of current 1n the
water, rather than 1n a quiet pool of water.
. The food that is already 1n the pond 1s all that 1s available
to the fish, unless extra food Is put In by the farmer.
. There 1s only a certain amount of water and pond area 1n which
to move about.
38

There are many fish that do grow well 1n ponds. Some of these are fish,
grown locally; some are fish grown 1n other parts of the world.
Many governments today are Introducing exotic fish species (these are
kinds of fish not native to that country) Into fish pond programs.
They do this for three reasons:
. Some Introduced fish grow better and faster than native fish.

. Some introduced fish are preferred by people for eating (over

local fish).
. The offspring of a cross between a local fish and an Introduced
fish sometimes grow faster and taste better than either of the
parent fish (this is called hybrid v.igon).

But exotic fish must be watched and used very carefully. They must not
escape into local waters. Some exotic fish which escape create problems
1n natural waters when they begin to compete with local fishes for food.
Also, introduced fish can carry diseases or parasites that are fatal to
native fishes.

There are certainly a number of fish 1n the natural waterways of your

area which will grow well in ponds. Native (local) fish are usually
easier to use because they are adjusted to local water and climate
conditions.
If at all possible, farmers should be encouraged to start their ponds
using a tested pond fish which 1s locally available and 1s well-liked
by people in the area. It can be a fish from the 11st given here or
one chosen from a 11st prepared 1n your area. The important points
are that the farmer be able to sell any fish he wishes to sell, that
the fish can grow in ponds, and that there is brood stock available
locally.

Fish Used in Pond Culture

Here are some characteristics that good fish for pond culture will have.
Certainly 1t may not be possible for a farmer to determine whether a
certain fish has all these characteristics right away, particularly for
those local fish not discussed in detail here or those newly Introduced
to pond culture. But good pond fish all have certain characteristics:
the more certain a farmer can be that the fish he chooses to raise fit
these descriptions, the more sure he can be of his success. Good pond
fish are:
. available locally

. able to reproduce (breed) naturally 1n your area.

. able to live in a confined space (the pond).

 39

. able to find the right foods 1n ponds.

. fast-growing.
. relatively free of parasites and diseases.
. known and Uked as a food fish 1n the area.
Some fish that fit these criteria for good pond fish and are now grown
1n ponds all over the world are named here. Though they all are grown
1n ponds, each has certain characteristics which mean that 1t will grow
better 1n some kinds of ponds better than other ponds. Of course, these
fish are not the only fish that can be used 1n ponds. But they are named
here because they have been tested 1n ponds, and they can grow well under
pond conditions. All of these fish are warm water fish.

SCIENTIFIC AND COMMON NAMES OF FISH USED IN POND CULTURE

Please note: Each fish has a scientific name which 1s

always the same. The common name, however, can be different
from one country to the next. It 1s a good Idea for anyone
who works with fish to know the scientific name.

Genus - species Common name

1. Angiutta japonica eel

2. bilitlckthyi, nobitU blghead carp

3. BoAboJ gonionotui tawes

4. CaAOAhhtf- aunatuA goldfish

5. CaMUi-iui aVLOiiiui crucian carp

6. Catla. catla catla

7. Chanoi chanoi milkfish

8. ClMkijia. molLtoKllla mud carp

9. CiMhina nvUgata mrlgal

10. ClcUuM batnachui catfish

11. Cla/Uai mac/iocephatui catfish
12. CtenophaAyngodon idtllui grass carp
 40

NAMES (Continued)
Genus • species Common name

13. Cypiunui caApio common carp

14. HeJtoitoma. temindU kissing gouraml

15. HeXvwtU nUoticui -

16. Hypophthatmichthyi moWUtix s i l v e r carp

17. Labia Kohita. rohu

18. Uugit cupkaXui, mullet

19. Uylophnxyngodon picvsi black carp

20. O&ph/wnema gonamy gouraml

21. SeManodviomii lebaitai -

22. Tilapia mcuMchOi tllapla

23. lilapia. tmZanopluiAa. tllapla

24. T.i£apia. mc&iamb-ica tllapla

25. Tilapia ruZotUa tllapla

26. TJuchogmteA pe.ctonatu> snakeskln gouraml

27. TlicJwga&ttA txichopttlmk three-spot gourami

Following 1s specific Information on some of the more popularxpond fish.

COMMON CARP

The common carp, CypUmA cxwpio, 1s a favorite warm water pond fish.
Conmon carp are used as a pond fish because they:
. spawn easily 1n ponds.

. do not get sick easily.

. tolerate wide ranges of temperature and pH (factors of water

quality discussed 1n detail later).

. eat all kinds of food, from zooplankton to decaying plants.

 41

. have a very good growth rate.

. accept supplementary foods.

Common carp generally are a grey-green color. However, they also can be
gold, yellow, orange, pink, blue, green, or grey. They spawn all year
round 1n warm waters, and they can be made to spawn by the pond owner.If
they do not spawn naturally. Common carp are good to eat when they are
cooked properly. They can be grown In ponds by themselves (monoculture)
or 1n ponds with Chinese or Indian carp (polyculture).
Some of the yields gotten In various countries by stocking cannon carp in
monocultures are shown 1n the following table.
Yield,
Country Culture methods kg/hectare

Czechoslovakia Growth 1n ponds with ducks 500

Guatemala Intensive culture 1n ponds 4,000

India Natural growth 1n ponds 400

Growth 1n ponds with management 1.500
Indonesia Intensive culture 1n ponds 1,500
Japan Intensive culture 1n ponds 5,000
Nigeria Commercial culture with
fertilization and feeding 371-1,834
Philippines Intensive culture 1n stagnant water 5,500
United States Intensive pond culture with 1
Inorganic fertilization 314
SeuAJii: Ziuidack, eXat 11972)
42

Conclusion: Common carp are a very easy fish to breed, keep, and harvest,
so a fish pond that relies on common carp will probably do well. Common
carp are a good fish for a farmer to use for his first effort. Kith good
management, cornnon carp will continue to produce healthy eggs and fry
until they are too old (above 5 years of age).

TILAPIA

The Titapia genus (family C1ch11dae) contains at least 14 species, which

are all good pond fish. The color of the fish differs only slightly
depending upon species; tllapla are generally dark brown to black In
color. The most common species grown In ponds Is the Titapia moiiamlU&i,
also called the Java tllapla. It has been Introduced throughout the world
and 1s easy to find 1n most places. Tllapla:

. are hardy fish, resistant to disease.

. breed easily 1n ponds.

. grow rapidly.
. taste good.
. can withstand wide temperature ranges.

Tllapla are herbivorous: some species eat higher plants; some eat
phytoplankton. Both the Java tllapla and the Nile tllapla {Titapia.
nitotlcjx) do well 1n very enriched waters (waters polluted by sewage).
All tllapla have slightly different eating habits, depending on the
species.

Tllapla reproduce every month or so, once they become sexually mature.
They then take very good care of their own eggs and fry In ponds. If
the farmer plans to breed and raise fry, this fish 1s a good choice
because the fish themselves take care of the fry at a stage where many
fish of other species die easily. The major problem with raising tllapla
1n fish ponds 1s that they become sexually mature at a small size, and
 43

begin to reproduce Instead of to grow further. It may be necessary to

separate the tllapla by sex before they are old enough to reproduce. Or
1t may be necessary to Introduce catfish Into the pond to control the
population of small fish.

Conclusion: Tllapla species have many possibilities for pond culture.

Their fast growth rate, ease of breeding, good taste and hardy bodies
make them a good choice, particularly for the f1rst-t1me fish fanner.

CHINESE C A R P S

Other kinds of carp, besides the common carp, often are grown 1n ponds.
Most commonly used are the Chinese carps. Some of these are:

. Silver carp (Hypophthalmichthyt moUX/ux). This fish eats

phytoplankton, but will accept rice bran and bread crumbs.
The silver carp gets Its name from Its silver color. It has
very small scales.

. Blghead carp [toUitlchthyt notUJLU). This fish feeds mainly

on zooplankton. It is a dusty green color on top, which fades
to a pale green color on the abdomen. It also has small scales.
 44

. Grass carp (Ctznophatiyngodon idettai). This fish is an

herbivore and eats water vegetation (but also will eat
almost anything). The grass carp 1s also silver-colored,
but has a darker grey area running along the top of the body.
It grows larger 1n size and has larger scales than a silver
carp
Other Chinese carps like the black carp (Mylophruufngodon picwt) and the
mud carp (ClMhlna motUoielZa) are bottom feeders. This difference 1n
eating habits 1s very Important in fish pond culture. It is the reason
why polyculture, or growing a number of fish species in one pond can be
successful. When one kind of fish 1s stocked alone 1n a monoculture,
the foods In the water not eaten by that type of fish are wasted. In a
polyculture of the above three species of Chinese carp, for example,
three kinds of food are being eaten.
The following table gives some examples of polyculture mixes and of how
many fish of each kind can be stocked in a pond. For example, Pond I 1s
stocked with silver, blghead, grass and cownon carp.
STOCKING RATES OF CHINESE CARPS IN PONDS
3 TO 7 METERS DEEP IN KIANGSU PROVINCE, CHINA
Weight of Number of Yearlings per hectare
Species Yearlings, grams
I II III IV
S i l v e r and
blghead carp 500 4,500 4,500 9,000 9,000

Grass carp 500 600 - 3,000

Black carp 500 - 450 - 3,000

Common carp 200 200 200 200 200

TOTAL: 5,300 5,150 12,200 12,200

Soufi.ce.: BtvidtuJi, tt at 11972)

 45

The preceding table shows polyculture mixes: as you can see, common carp
can also be used 1n polyculture with Chinese carp. Chinese carp are
grown 1n ponds because they grow well 1n polycultures, and they are very
good to eat. The silver carp grows faster and 1s tastier (according to
some farmers) than coitmon carp. The grass carp Is most often used to
control weeds 1n the pond. In fact the grass carp does a better job of
weed control than do chemicals. The grass carp 1s perhaps the most Inter-
esting of the Chinese carp and 1s now being studied by scientists 1n
many countries to find better ways of breeding 1t in ponds.
A farmer might run Into problems raising Chinese carp -- 1f he does not
look Into his local situation very well. Farmers will have to have a '
source of Chinese carp fry from a government hatchery or a local breeder
before trying to raise Chinese carp. The carp only breed once a year,
and then, 1n most cases, only with help from man. Also, Chinese carp are
very susceptible to diseases. Then, because they are delicate fish, they
must be handled very carefully, or they will be Injured.
Conclusion: A farmer just beginning a fish pond probably would not want
to breed Chinese carp, but he certainly should be familiar with these
fish and how they might help his ponds. For example, even two or three
large grass carps placed 1n a pond with many fish of one other species
could be valuable for keeping a pond balanced.

INDIAN C A R P
There 1s one last group of carp often cultured in ponds. These are the
Indian carp. Indian carp are further divided Into minor and major carp.
The major carp of India are the catla [Catla catta), the rohu {Labto nokUa),
46

and the mrlgal [CiMhina. m>ugata.). The minor carp are the reba, the bata,
the sandkohl, and the nagendram fish. The Indian major carp will not
spawn 1n standing water, so special ponds are built 1n India to provide
a flow of water for these fish, who must have running water In which to
spawn. The Indian carp can be made to spawn by man, but this Is a dif-
ficult process (see "Managing Brood Stock"). However, there seems to be
no reason why the Indian carp cannot be spawned In ponds 1n places where
ponds can be constructed to provide constantly running water.
Conclusion: A farmer who has only a small pond should not try to breed
Indian carp. Indian carp can be grown 1n polycultures with common carp,
but are not as good or fast growing 1n ponds as the Chinese carp.
Indian carp are also susceptible to many diseases. This 1s a fish for
an experienced fish farmer who 1s Interested 1n, and able to, experiment.

GOURAMI
The gouraml {Oiphfionemu gc>umy) 1s a very good pond fish. It 1s
originally from Indonesia, but now 1s grown all over Southeast Asia.
Gouraml possess an accessory air-breathing organ, which means that they
can survive 1n waters that are low In dissolved oxygen. This makes 1t
an Important fish 1n areas where the temperature remains high and there
Is little water for certain periods of the year. Gouraml spawn all year
round 1n warm water conditions. Gouraml:
. spawn easily all year round 1n warm waters.
. taste good.
. are easy to breed.
. accept a variety of foods.
. are hardy.
 47

Conclusion: Gouraml are good fish for a first-time fish farmer. And
they are certainly a fish to be considered very thoughtfully by farmers
who live 1n areas that remain very hot and dry for periods of the year.
The gouraml 1s used to these conditions, and there are other pond fish
which would not do well at all under these conditions.

CLARIAS CATFISH
CltvuM catfish are found throughout Asia, India, and Africa, as well as
the Middle East. The species most often used as pond fish are CltvUai
mcxAocephatub and ClatuM baXxackii. CtoJuu macxocephaluA 1s preferred
for Its good taste; CtaJuai batxachut grows faster.

These catfish have accessory air-breathing organs; they can even crawl
out of ponds to look for food. Because they can live 1n shallow ponds,
these catfish are sometimes used 1n culture with rice (see paddy culture).
They are scavengers, which means they will eat just about anything.
However, they prefer to eat worms, snails, and other fish. They are
often used 1n polycultures with tllapla where they serve as predators on
the very small tllapla. They will eat supplementary foods, and give very
high production 1n ponds. In Thailand, ClarUai catfish yield about
97,000kg/ha when they are fed supplementary foods. These catfish are
hardy: they sometimes get external parasites, but these do not kill the
fish.
Conclusion: The catfish are another good fish to be raised 1n areas
where high heat and long dry spells are found. They are good to eat,
easy to keep, and can be used 1n ponds 1n a number of ways. Certainly
a farmer who already cultures paddy rice might be Interested In consi-
dering adapting his paddy to catfish culture.

TAWES
The common name tawes 1s applied to three species of fish — BoAboi
gorUonotuA, PurvUoi javaniait, and PunXUul goiuonotai. These fish
usually are used 1n fish ponds for vegetation control, 1n polycultures
with Chinese carp. Tawes are able to spawn all year round, but they
most often spawn 1n the rainy season. Tawes need wel1-oxygenated water
 48

with a strong current to spawn. Tawes feed on soft water plants, but will
also take rice bran. There 1s not a great deal known about the tawes at
present, but 1t can be used 1n polycultures when the grass carp 1s not
available.

Conclusion: A farmer starting a polyculture certainly might be Interested

in using this f i s h . However, f i r s t - t i m e fish farmers with limited space
would not want to try breeding this f i s h .

HETEROTIS NILOTICUS
The HeAesiotu nctoticui spawn easily 1n ponds. The mature fish w i l l
build a grass-walled nest 1n the weeds at a pond's edge and spawn inside
this nest. They spawn when water 1s low and very warm, at the end of
the dry season. The mature f i s h feed only on plankton, but 1n a pond
they w i l l accept supplementary food. This fish has a swim bladder which
can serve as an accessory a i r breathing organ.

Conclusion: There 1s not yet a great deal known about the HtttAotU
ruloticui as a pond f i s h . But 1t seems that i t is a good choice of fish
for warm climates and warm waters. A farmer who lives in such a climate
might find raising, and even breeding, this fish quite easy - - particu-
l a r l y in a very w e l l - f e r t i l i z e d pond.
 49

OTHER GOURAMIS

These are the snakeskln gouraml (or Sepat S1am — TruchogaAttn. pecfcwtoti*),
the three-spot gouraml [TxlchogcuteA. t/Uchoptvun). and the kissing
gouraml (HUoitom tumincki). All of these fish taste good. And they
breed easily 1n well-oxygenated, warm water. They do require a pond which
has a good growth of vegetation (particularly Hyd/uJJU veAticsUlata.).

Conclusion: In a pond situation such as that outlined above, these

gouramis are easy to breed and raise. They are a good fish to use 1n
polycultures with other gouramis, tllapla, and common carp.

MILKFISH C U L T U R E
The mllkflsh {Chanoi chanoi) can be raised in freshwater even though it
is primarily a bracklshwater fish, and will not breed 1n ponds. The fry
are caught along the shoreline at breeding season (the rainy season) and
transferred to freshwater ponds. Mllkfish culture 1s done for the most
part in the Philippines and 1n some other Southeast Asian countries, like
Indonesia and Taiwan.

Adjusting (acclimatizing) the fry from the saltwater to the freshwater

pond is hard to do; many fish die if the adjusting process 1s not done
well. Therefore, mllkflsh usually are cultured 1n bracklshwater ponds
only; the use of milkfish 1n freshwater ponds is not widespread. Milk-
fish feed on a complex of bottom algae, and, recently, it is reported
they also feed on phytoplankton. Milkfish are prized for their beauty
and their good taste, though they have many, many small bones.
 50

Conclusion: This 1s not a fish for the first-time fish farmer. In fact,
1t 1s not a good choice for any farmer uniess he has a saltwater pond; 1s
Interested 1n trying to acclimatize the fish to a freshwater pond; or can
buy nllkfish from a source that has them already 1n a freshwater pond.

EEL C U L T U R E

Eels (Angoctta sp.) have been cultured In Japan and Taiwan for years.
Eels are very much a luxury food and are not normally grown alone 1n ponds
outside of these two countries. The eels are grown 1n ponds 1n poly-
culture with other fishes and are particularly useful 1n polyculture
with species of tllapia because they eat the smaller tllaplas. The eels .
used 1n Taiwan {AngiUtta japoiUaa.) spawn 1n the sea and the fry (called
elvers) swim upstream and are collected by dealers. Eels must be fed
supplementary feeds like pellets made of trash fish.

Conclusion: It Is not recommended that farmers work with eels because

they must be fed protein and are not very efficient converters of food.
Also, eels cannot be bred 1n fish ponds.

OTHER P O N D FISH

Some other fish grown in ponds are the goldfish {CaAaii-iui awiatui), the
crucian carp {CaAoiiiai c&uiA&iul), and SzManochfumii KobuAtui. Any of
these fish can be grown 1n polycultures with Chinese, common carp, and
tllapia.

Conclusion: The use of one of these fish In a pond stocked with other,
more Important fishes, results 1n an increase in yields of both species.
In polycultures these species can utilize other food sources and also
act as predators and weed controllers.
 51

One other fish species used 1n freshwater ponds 1s the striped mullet
(Uugil ctphalui). Like the mllkflsh, the mullet 1s primarily a salt-
water fish,and Its fry are collected as they swim upstream. Recently the
mullet has been made to spawn by man, but this 1s difficult to do because
mullet are very sensitive to handling. However, mullet can survive 1n
wide temperature ranges and are herbivores, so some farmers may want to
try mullet.

A CLOSING N O T E O N FISH
All these fish have been and are now being cultured 1n fish ponds around
the world. However, as stated before, they are not the only fish which
can be grown 1n ponds. In every area there are a number of fish 1n
natural waters that could be grown 1n fish ponds. So you might find 1t
 52

a good Idea to experiment with local fish In your ponds, to find those
fishes that might be available to farmers 1n your area for use 1n their
ponds. It 1s better for an extension worker to do the experimenting
than 1t 1s to have a farmer risk wasting his time or money, or even more
Importantly, risk failure. If a farmer falls, he may not want to try
again.
 Fish Pond Construction

Construction of a large pond can be very expensive if labor is hired,

machines are used, and expensive equipment 1s rented. For example, 1n
the Philippines, a one-hectare pond having two concrete gates and walls
3m high x 3m wide recently cost US$1,522.56. Another pond, about 100m
x 25m, with only a Rivaldi valve cost about US$680.
An interesting fact about fish pond construction 1s that whether the
pond is large or small, expensive or Inexpensive, ponds are all very
much the same. A larger, more expensive pond will not necessarily be
a better pond.
Here is an example of a good beginning for a new and small fish farmer:
A "backyard" fish pond was planned and sited very carefully
by a farmer. The pond was dug by the farmer and constructed
with bamboo pipes for water Inlets and outlets. The construc-
tion Itself cost no money. The farmer's only expense was a
supply of fingerllngs purchased from a nearby market. This
fish pond, managed by the farmer and his family, produced
enough fish for the family and some extra income from fish
sold or bartered for goods needed by the farmer. The family
ate well and suffered no major illnesses during the year.
Next year, the farmer plans to add another pond and to produce
more fish for market. He will add a Rivaldi valve or a wooden
monk to this new pond, because either of these will make on-
going management somewhat easier, now that there will be two
ponds to manage (the bamboo pipe sometimes got clogged. This
was no problem to correct when there was only one pond. But
it would take up needed time In a two-pond operation).
Whichever the farmer chooses, the valve or the monk, he will
make it himself with materials found locally, using money from
the sale of his fish:
54

This farmer began M s operation well. He started small and

worked Into a larger operation. However, even for the larger
fish farm, he planned an expansion which was within his means.
This kind of careful planning Increases the farmer's chances of
success -- and yours. And the scope of the project 1s some-
thing he can undertake on his own. He gained the knowledge and
experience that he needs to expand his operation.

The following section presents a range of Ideas for constructing fish

ponds. The farmer can pick a combination of construction possibilities
which best fit his own needs and resources.

IMPORTANT: Stress that the "right" way 1n any situation 1s the way
which:
. the owner can afford
. the owner can manage easily
. fits the owner's needs most completely

Construction should begin only after careful planning such as that

outlined in the preceding sections on "Planning."

DRAINAGrE SYSTEM

A fish pond has three main parts: the walls, the water Inlet, and the
drainage system. Walls are also called dams, dikes, levees, or bunds.
This manual uses "walls." Whatever they are called, walls hold the water
in the pond. They can be built using soil taken from Inside the pond,
or they can be built with soil taken from another place. They must be
strong enough to withstand the pressure of all the water Inside the pond:
water constantly pushes against the walls. They must also be water
tight (impermeable), so the pond does not leak.
 55

The water Inlet, located above the pond water level, is used to let water
Into the pond and is closed off after the pond is filled.
The drainage system is used to empty the water from the pond when the
farmer is ready to harvest the fish.
There are many ways of making inlet and drainage systems: the most
Important criterion is that they work. But the walls are especially
important: they are all that keep the fish inside the pond. The walls
must be built carefully.
Pond construction follows the same principles whether the pond 1s a
single backyard pond or part of a large fish hatchery. These are the
steps 1n pond construction:
. Survey the land
. Mark out the area of the pond
. Measure and mark out the walls
. Excavate the pond bottom, if necessary
. Build the drainage system
. Build the water inlet
. Build the walls
. Seal the pond bottom and walls
Each of these steps will be discussed in detail in the following pages.

Survey the Land

The first step 1n the construction of a fish pond is marking the area of
the proposed pond. If the site chosen is a natural slope, the first
thing to be done is to find out where the main wall will be built. The
main wall should be marked off at the lower end of the pond, wfiere the
pond will be the deepest and the slope the greatest. This 1s where the
pond's drainage system will be put. If the pond is to be on a flat area,
the pond bottom itself must be made with a slope so the pond will drain.
This is done by digging one end deeper than the other end. Remember:
the main wall is always at the deeper end.

DETERMINING THE SLOPE

Even flat ground usually has some kind of slope, although it may be very
little and hard to see. So, before constructing the pond, the land is
surveyed to find out which way the land slopes and what that slope is.
56

There are a number of ways which can be used to determine slope. The
way outlined here probably would not be used by many farmers 1f they
were building a pond on their own, but this 1s an accurate method of
determining slope and should be encouraged 1f at all possible.
To survey the land for slope, some
STAKES stakes (long, straight pieces of
wood), some string (flshllne, etc.),
and a carpenter's level are needed.
Most farmers will not be familiar
with the level, a device that has
an air bubble trapped Inside which
rests between two drawn lines.
When the level 1s placed on the
ground, 1t shows whether the area
1s flat or sloped: 1f 1t 1s straight
or flat (level), the bubble stays
In the middle between the lines;
STRING- 1f the land slopes, the bubble will
move to the right or left of the
lines, depending upon the direction
of the slope.

CaApetUeA'A Itvtt

Farmer's who cannot find a carpenter's

level can make a level by getting a
small lightweight container. They
should then place the container on a
known horizontal surface, add water,
and draw a H n e around the Inside of
the container at the water level.
Then, If this container 1s placed on
a slope, the water w i n shift awa/
from the H n e to show the slope.
When all the equipment 1s gathered, measure the slope.
. Look at the land and decide which part 1s higher.
. Drive a stake or a piece of wood or bamboo Into the ground
at the highest point.
. Walk away downhill from the stake about 100cm. Drive another
stake Into the ground at this point.
 57

Tie string or flshline or vine (whatever 1s being used)

between the two stakes. Attach the level to the string.
Then move the string up and down on the stakes until the
bubble 1s between the lines on the level, or the water
level is even with the H n e marked on the container.
This will mean the string 1s level between the stakes,
even though the stakes are 1n the ground at different
heights.
Measure the height of each string by measuring from ground
level to the place where the string 1s tied.

STAKE

GROC
LEV EC

This drawing shows that one string 1s tied at 20cm; the other 1s tied at
25cm. Therefore, one end of the area 1s 5cm lower than the other. The
distance covered by the string 1s 100cm, so the slope 1s 5% (over 100cm
of ground, the elevation changed 5cm). Since a slope of 2-5$ 1s good for
a fish pond, this site has a satisfactory slope for a pond.
Other Ways of Determining Slope. As mentioned earlier, the above method
of measuring slope Is a good one, but 1t may be difficult for some people
to do. It 1s possible to calculate slope roughly. A farmer, who realizes
that what he is looking for 1s a way to place his pond so that the water
can enter from the water source and drain away well, can figure the slope
of his land by doing such things as rolling a ball or other round object
and watching carefully to note where and how quickly the ball rolls. A
good slope would mean a slow-rolling ball. A variation of this Involves
throwing a quantity of water, or a mixture of water and dye, on the ground
and watching the path 1t takes and Its speed as 1t moves along the ground.
It 1s Important to consider slope carefully. A well-placed pond with
good drainage 1s easier to care for and has more chance to be successful.
It may be necessary for the pond owner to measure his land only once to
find a good location. Or It may be necessary to repeat the measuring a
number of times. This 1s probably a good thing to encourage since
locations which look alike to the eye often have enough difference 1n
slope to make a big difference to a fish pond. Also, determining slope
58

1s a larger project 1f more than one pond is being built. Then the ponds
must be laid out In relation to each other.
There may be several areas which have the correct slope, but only one
which 1s good 1n terms of getting the water into the pond from the water
source and out of the pond easily. For example, the farmer might H k e
to drain his pond so that the water irrigates his fields. Therefore, he
will want to keep this 1n mind when he decides upon the exact placement
of his pond. Likewise, 1f he 1s building a pond on a hillside 1n back
of his house, the slope may be perfect, but he will need to avoid drainage
Into his buildings.
Once the slope is found, the location of the main wall can be determined.
Of course, If the pond 1s built on flat ground, 1t will have four walls.
If the pond 1s a barrage pond, 1t may only have one wall. The number of
walls depends upon the land. The shape of the land may mean that one
wall or two walls or four walls will be needed.

Mark out the Pond Site;

Measure the Walls
Now that the slope 1s known, the place of the main wall 1s known. The
main wall 1s at the end of the pond which will be deepest, and 1s the
wall where the drainage system will go.
Hark out the main wall, and any other walls that will be built, with
stakes. The walls, when finished, will be wide: 1t does not matter so
much where the stakes are placed within the width of the planned walls,
for they are to be used as height markers.

.,1*411

/
STAKES
STRING
 59

The farmer has to plan the depth of his pond and the height of his wall.
If the pond 1s going to be 2m deep at the deepest end, for example, the
walls should always be at least 30cm higher than the water level for a
small pond, and at least 50cm higher for a large pond. Also, the walls
will settle after they are finished, so 1t is best to make the wall 10*
higher than the desired final height of the wall. A 2m deep pond, there-
fore, would have walls with a total height at the deepest point of 2.5 or
2.6m [height of wall before 1t settles « depth of pond + 30cm (for small
pond) or 50cm (for large pond) + 101 of depth and 30 or 50cm].
Tie strings to the stakes along the main wall line, at a height of 2.5
or 2.6m for a pond whose deepest end will be 2m. Use a levelling device
to connect strings to the stakes marking the other walls, 1f the pond has
other walls, at the same level as the string marking the height of the
main wall. The strings are the building markers. When the walls reach
the strings, they are the right height.

Dig the Pond Bottom

As stated before, the pond bottom must slope downward from the shallow
end to the deep end to help drainage. The pond bottom usually has a
slope of from 2 to 5%. (A slope of 2% would mean that for every 100cm
change in length there 1s a 2cm change in height.)

2cm

The pond bottom must be clear of rocks, roots, trees, and stumps so that
later, when a net 1s used to harvest the fish, the net will not get caught
and tear. If the pond bottom 1s already smooth and slopes well, 1t can
be left alone. Or, if the pond bottom only has grass on 1t, the grass
does not need to be removed before the pond 1s filled. In fact, once
water is added to the pond, the grass will die and rot and add nutrients
to the water.
If the pond bottom does not already slope downward, excavate (dig out)
the bottom area of the pond until a good slope for drainage is made.
Adjust the height of the strings tied to the wall markers if digging the
bottom has changed the height.
Keep the soil which was dug out of the pond: when the pond walls are
finished, the soil can be placed on top and planted with grass. This
fertile topsoll will root grass easily; this grass will help keep the
walls from eroding (washing away).
60

The pond bottom can be excavated by hand

or by using machines, like bulldozers,
1f they are available. Remember: 1f the
land for the pond 1s chosen well with regard
to the natural topography, only a small *
part of the pond bottom will need to be i
dug out. The most important thing 1s ryt
to have the pond bottom slope so that / U
the pond can be drained. -S~~~•..-s,

Build a Drainage System ' N

A drainage system 1s anything that Is used to empty the pond. It consists

of the outlet system for letting water out of the pond and the drainage
ditches which carry the water from the pond away.
As stated before, the best and easiest way to have a good drainage
system is to build the pond 1n a place which provides a good slope — on
a hill, for example. This is the first step. Then, there are many
different drainage systems which can be put into the pond. Some of these
drainage methods are expensive; others are very inexpensive.
The drainage system must be built before the pond walls because some
drainage devices go through the walls. (In some countries the drainage
is done by knocking a hole in the wall of the pond. When the pond is
dry and empty, the hole is patched up.)

SCREEN
OVERFLOW /
 61

One of the easiest ways to drain the pond is to place a bamboo or plastic
pipe through the base of the wall into the middle of the pond. The end
of the pipe which is inside the pond has a screen over it to keep fish
from entering the pipe. The other end of the pipe, the end that is
outside the pond, is plugged with wood or clay. To drain the pond at
harvest time, the plug is pulled out.
Two other methods of draining the pond which work but are not used as
often, are the siphon and the pump. A siphon 1s merely a flexible
plastic or rubber tube. One end of the tube is in the pond near the
bottom; the other end is placed on the ground outside the pond. A
vacuum is produced in the pipe by sucking at the end outside the pond
until water begins to flow out. The end of the pipe inside the pond
must be kept in the water or the siphon will not work.

SIPHON
/--OUTLET (MUST B>£
V L.0W6R. THAJ4 INLET)

POMO fcOTTOM

The pump 1s usually not a good idea for a farmer because the engines
that are used to run the pumps are costly and often not available, or
gasoline to run them is costly, or they must be given frequent attention
so they will not break down.
All ponds must be drained for harvesting fish. Also, it 1s a good idea
to let a pond dry out completely once every year or so to get rid of any
unwanted fish and/or disease-causing organisms.
The following are some tested, effective drainage systems a fanner can
consider for his pond.

RIVALDI VALVE This valve was named after a farmer in Paraguay who
first used the system. It is an easy and good method to use in a small
fish pond. A farmer who is building only one small pond for family use
would find this valve a good choice for his needs.
The Rivaldi valve is a flexible plastic pipe. Place the pipe on the
ground before the wall is built. Build the wall. Then turn up and tie
the pipe to a stake. Tie the pipe end at a level which is somewhat above
the usual level of the water in the pond. Keep the pipe up and tied to
the stake until 1t is time to drain the pond. Then, untie the pipe and
let 1t lay on the floor of the pond until the water is out of the pond.
At other times, the pipe works as an overflow to let out water after a
heavy rain: when the water level in the pond reaches the top of the pipe,"
62
water will flow down the pipe and out of the pond.
The R1vald1 valve should have a screen over the end Inside the pond to
keep fish from going out of the pond while the pond Is Ming emptied or
drained.

E L B O W JOINT A variation of the R1vald1 valve, this consists of two

metal or plastic pipes connected by an elbow Joint. The joint lets the
upper pipe be turned down to drain the pond. The joint Is screwed onto
the ends of the two pipes, one of which extends under the wall and the
other above the surface of the water. This drainage method Is also
called a "turn-down" pipe because 1t 1s actually turned on Its side to
drain the pond.

£CREEN

METAL PIPE

M>RAIN
CONCRETE ANCHOR
BLOCK

BOTTOM-WATER OVERFLOW This drain takes water d i r e c t l y from the

bottom of the pond where oxygen levels are the lowest. The Rlvaldl valve
and elbow j o i n t do this also, but each of these requires that the pipe
be lowered so the pond can be drained. The bottom-water overflow regu-
lates the depth of water without any need for moving the pipes. When
new water 1s added to the pond, the less-oxygenated water at the bottom
drains out automatically.

This type of drain 1s r e l a t i v e l y complicated and usually d i f f i c u l t t *

b u i l d . For a small f i s h farm operation, 1t would probably not be worth
the e f f o r t .
 63

DOUBLE SLEEVE OVERFLOW This drainage system 1s built like

the turn-down pipe, except a large pipe 1s placed over the section of
pipe which extends above the pond's surface. This outer pipe should be
longer and wider than the Inner pipe, which 1s placed so that i t 1s about
equal In height to the depth of water desired 1n the pond.
When fresh water 1s required in the pond quickly because the water 1s
too warm for the fish or because the oxygen levels are low, all the
fanner has to do is to add water to the pond. The double-sleeve overflow
automatically drains the stale water from the bottom of the pond.
 . i t can W

^=- — _ "V / tw0

• ^ 0 0 0 bUOiCt < * «

COT"******
 65

IMPORTANT: The wooden gates of the sluice must fit Into the slots well,
but easily. The wood will swell to make a tighter seal as 1t 1s soaked
by the water 1n the pond. The slots (grooves) can be filled with several
strong, long, narrow boards which have been bevelled or notched so that
they fit together tightly. Or the slots can be filled with single pieces
of wood. When single pieces of wood (or a number of boards which have
been fastened tightly together) are used 1n a sluice, the pond 1s drained
and the water flow regulated by lifting the entire wooden structure out
of the groove to a height which allows some or a lot of water to flow out
of the pond. When separate boards are used in the grooves, the boards
are taken out one at a time. If a small flow out of the pond is desired,
only one board may be taken out. To drain the pond, all the boards are
removed. In a sluice having two wooden gates, the space between the gates
can be packed tightly with earth. This will help seal the water Into
the pond.

WOOD BOARDS
WATER LEVEL

EARTH FILL

Side, view, — t
eajrfh- lilted 6twice- C
CONCRETE BASEL

MONK The monk 1s very much like the sluice, but 1t 1s not built into
the pond wall the way the sluice i s . Sometimes the back of the monk
does touch the wall, but 1t is not built Into the wall. Also, a monk is
never used at the inlet as a sluice can be.

Oioa-sectlon o< monk, iidt view

WOODEN GATES

DRAIN PIPE
 66

SCREEN

A monk-type drainage system controls the level of water and prevents fish
from escaping when the pond 1s being filled. It also allows for good
drainage of the pond. The completed structure consists of a horizontal
drainage pipe and the vertical structure, or monk. The drainage pipe
must be placed before the walls are built; the monk may be built outside
the pond, and placed Inside later.
The drainage pipe runs from the back of the monk under the pond wall.
It should be between 20 and 40cm 1n diameter; 1f piping of this diameter
1s not available, two pipes may be used. For good drainage, place the
pipes 30 to 40cm lower than the pond bottom. Make sure the drainage pipe
1s on solid ground so that the pipes do not bend. Bent pipes are difficult
to clean out when clogged.
The monk Itself 1s a structure which 1s closed on three sides and open
1n the front. The open side should face the Inside of the pond and should
be at least 30cm wide; the entire monk should be at least 40cm above the
surface of the water.
The two parallel sides of the monk, and the bottom, have grooves cut 1n
them: a monk may have two or three grooves. One groove, or part of a
groove 1s always for the screen. The other groove(s) 1s for the boards.
Honks can be made of wood, concrete or brick, A wooden monk should use
strong wood — 4 to 5cm thick.
A concrete monk should be reinforced with metal. Before the concrete 1s
poured, a wooden form shaped like the monk 1s made and oiled. A frame,
 67

slightly smaller than the wooden form, 1s made of chicken wire, or some
other strong wire, and set down Inside of the wooden form. The concrete
1s then poured Into the form. A good concrete mixture for monks 1s
1 part cement, 2 parts clean sand, and 4 parts crushed stone, by volume.

G R O O V E S FOR &OAR.DS
Cufjiuay o& monk

BRICK. WALLS

DRAIN PIPE
Top vizw
CONCRETE BASE of, monk

-^ r»)P£

4-
If the monk 1s made of
concrete, the grooves can
be shaped by bending Iron 3
rods Into a "U" shape.
Remember, the grooves must
be sunk Into the sides and
bottom of the monk.
3
The grooves are filled by
using a series of boards —
wide enough to fit the
grooves well and between

y-1
20 and 30cm high. Each
board has a hook on It so
It can be lifted from the
groove easily; the boards
\m
VH '
may also be bevelled or
notched so that they fit
together wel 1.
If the monk has three grooves, the first groove can be a large screen.
The screen 1s what keeps the fish from escaping as the pond drains.
However, 1f the monk has only two grooves, a smaller screen can be placed
above or below the boards 1n the first groove. Placing the screen at
the bottom allows water to drain out from the bottom of the pond.
68

HERRGUTH M O N K This Is a monk with three grooves. A large screen

1s in the first groove. The large screen 1s better than a smaller one
because It does not get clogged up as easily as a small screen.
The second groove holds a series of boards. The lowest board can be a
small screen. Water flows through the large screen 1n the first groove,
and through the small screen 1n the bottom of the ,f1rst series of boards,
up and over the third series of boards Into the drainage system.

There are other ways this kind of monk can be built. For example, m e
second groove could be filled by a large wooden gate (one piece of wood
or several fastened together) which could be raised and held up to allow
a flow of water from the bottom of the pond. It is this flow of water
from the bottom of the pond which 1s Important.
The Herrguth monk would probably not be used 1n a pond which is filled
by rainwater. In these ponds — sky ponds — a regular monk 1s used,
and the space between the two wooden gates 1s packed with mud to make
a watertight seal which lasts for the fish-growing season and 1s removed
when the pond is drained for harvest.

S O M E N O T E S A B O U T M O N K S Be careful with screens. Bamboo slats

can be used Instead of screening if the fish are large. But for fry,
the holes should be less than 2mm 1n diameter. Often the screens are
made by poking small holes in sheet metal. The screen mesh can get
larger as the fish grow.
A valve is sometimes placed on the drainage pipe behind the upright part
of the monk. This 1s used to control the draining speed and 1s easier
to do than to move the boards in'the grooves.
 69

A large catching ditch can be made 1n front of the monk to help with
taking fish out of the pond when the pond 1s being drained for harvest.

DRAINAGE DITCHES Drainage ditches are channels which should be dug

on the bottom of the pond to help the water flow out. Lining the ditches
with stones helps the water flow. A small family pond does not require
this system of drains. The only real requirement for drainage is a
gentle slope.
This 1s .the time to build other ditches which may be needed. For exam-
ple, if the farmer wnats to use the water from his fish pond to irrigate
his land, he will want to construct the ditches or channals which will
carry the water from the pond to the field or to storage tanks for use
later. Therefore, the farmer must consider carefully where the water
which 1s draining from a pond 1s going to go. If the pond is being fully
drained, and the pond is built on flat ground, he should build drainage
ditches around the outside of his pond to drain the water away from the
walls. These ditches should be 30-40cm deep.

DRAINAGE
DITCHES

CATCH
BASIN
MONK.

DIKE
DRAIN PIPE

Water Inlet
All ponds, except for those filled directly by a spring or by rainwater,
need water inlets. The water Inlet must be constructed so that 1t supplies
adequate quantities and quality of water, and so that it does not allow
unwanted fish or other materials to enter the pond. This usually means
there must be a channel of some kind to bring the water to the pond from
the source and a filter of some kind to keep the water which goes Into
the pond clean and free from predators.
70

INLET : DIY.E.R.SION. CWAMMEU

COURSE SCR.EEN

Fine scsceeu

OUTLET: DRAIN PIPE

/////////////l//M.(/l//'ll!lillUV\\\^
A water inlet can be as simple as a bamboo pipe of good diameter running
from a water source through the wall into the pond. Remember: the Inlet
pipe should be placed above the water level so that incoming water drops
Into the pond. In some areas, such things as bamboo strips are tied to
the end of the inlet pipe which is placed over the pond. The water flow
into the pond 1s broken up by the strips and the water picks up and takes
more oxygen from the air Into the pond water.

If the pond 1s large or 1s a stream-fed barrage pond, a sluice makes a

very good water Inlet. The sluice can be one piece which controls flow
when It 1s lifted to various heights, or the sluice can be a series of
boards slipped in and out of the grooves.
It 1s better to filter most pond water as 1t goes into the pond. Filters
are not needed if the water is clean and clear and the farmer knows the
source is free from unwanted fish. But if the water 1s muddy, or has
lots of leaves or debris in it, a filter helps keep the water quality
good.
A filter can be placed at the beginning, middle or end of the channel
which brings water to the pond. Usually filters work best near the water
inlet. Filters can be made very simply. Remember they must keep unwanted
fish out and pond fish 1n.
A wire screen makes a good filter. The picture above shows a sluice with
a gate with fine screening to strain incoming water of pieces of debris
and other unwanted fish and materials. Note the screen fits into the
water channel exactly.
 71

The horizontal screen at the

SCR.LEN left 1s very effective.
Here the screen 1s placed
so that the water passes
through as 1t falls Into the
pond. This screen merely
juts out from the wall at
the Inlet.

In the version below the

horizontal screen has a
vertical screen wall attached
to 1t. This short wall
prevents fish from going
over the screen.

POND

In any variations of these kinds of f i l t e r s , the screens should be

assembled Into one piece for easy removal as a unit for cleaning.
72
There are other ways of filtering the water:
A nylon mesh bag makes a good filter, as long as it 1s partially sub-
merged 1n the pond so that 1t does not tear as the bag catches fish or
other material from the water source. Check 1t periodically.

WATER INLET
NYLON MESH
BA&

A sand and gravel f i l t e r 1s particularly useful for cleaning out fish

and eggs. I t requires building a smaller pond or tank at the water
tnlet. I f a f i l t e r Is built In the earth I t must be lined with a water-
proof Hner.

WATERPROOF
LINER'

A saran fiber filter 1s basically like a wire screen that 1s placed

horizontally underneath the water Inlet. However, 1t 1s placed 1n a
box standing 1n the water and uses saran fiber material Instead of wire.
(See drawings next page.)
 73

Satan ^iieA £££tfc*

W N

2.H «
WATER INLET

WOOD 50X
J
5ARAN

These filters all have good and bad points. All must be cleaned often
to remove debris that collects 1n them from the water source. The best
filters are the sand and gravel filter, and the saran filter, but these
are more costly than the others.
The farmer should examine his water source carefully before deciding on
the kind of filter. If the water 1s very muddy, or has lots of leaves
and grass in it (organic matter), he can use the wire screen. If the
water source is free of organic material, the mesh bag will work because
1t is not likely to be torn. If the water contains unwanted fish and
eggs, as well as a lot of organic matter, the saran filter or the sand
and gravel filter is best.
To clean the filters, remove them and clean them with a brush and fresh
water. Or flush the filter with water in the opposite direction of the
normal water flow. This is called backwashing.
IMPORTANT: Filters must be kept clean to be of any use. These filters
should be cleaned each time water is let into the pond.
74

SILTATION T A N K One other structure which should be built at the

water inlet, when necessary, Is called a slltatlon tank. Silt Is the
mud that 1s suspended (floating)'1n water. S1lt can become a problem
when 1t clogs the gills of the pond fish so they cannot breathe. If
the water source has a lot of mud In it, a slltatlon tank should be
built at the Inlet to the pond, or at the Inlet to the first pond, 1f
1t 1s one of a series.
The slltation tank can simply be a smaller pond. The water flows Into
this pond and 1s kept there until the mud falls out of the water and
settles on the bottom. Then the clear water 1s let Into the fish pond.
Slltatlon could also be done 1n a storage tank made out of old oil drums,
etc. The Important thing 1s that something be constructed or set up so
that the silt has a chance to fall out of the water before that water
goes Into the pond.
The silt must be removed from the slltatlon tank or pond every so often.
The silt which Is removed should be used 1n gardens and fields: 1t Is
very fertile.

WATER INLE.T SIPHON

Y'H" 'if
"/\
't\\' VVALL-
'//// tll,,.'ll/\ !'iS
SILTATION %W"<U(/''iiiii> w""-'^\
W//// TAW'"'*"' V ' ^ ' ^ POND
<®3
^w> -
l
Ill'' --"//

Build the Walls

The walls (dikes, dams, levees) have to withstand the pressure of all the
water 1n the pond. They also have to be watertight to keep the water
Inside the pond.
The construction of the walls depends upon the kind of soil 1n which the
pond 1s being built.
A soil which Is a mixture of sand and clay is best. If pure clay is to
be used, 1t must be mixed with other soil before 1t can be used. Pure
clay will crack and leak. Do not use turf, humus, or peaty earth. All
stones, pieces of wood, and other materials which might rot or otherwise
weaken the wall must be removed before building begins. If the soil
contains enough clay, the walls can be built by placing layers of soil
20cm deep over the drainage pipes and tamping each layer down until 1t
is compact.
 75

till",ii"'"',.
1
wii "in" 0i''' on,1
„„(,. ttllli.' ////,,

full < ''///III CLAY «M.'//(at,

<it>- <nin,, t/if ''ti/iif"ftill"//?//„ <//,, %,

•<^SB^^^ «*>'- 'fa'"*-
The finished height of the wall should be about 30cm above water for
small ponds and 50cm above water for large ponds. The width of the wall
at the top should be about equal to Its height. For a large pond, the
wall 1s never less than lm wide at the top; most walls are built so that
two people can walk side by side along the top.
Tamp the soil down with a simple tamping tool. Some people use a large
rock or even their own weight by jumping up and down on the soil. The
Important thing is that the soil must be packed down very tightly.

One way to build pond walls in soil that does not have a lot of clay or
is very sandy is to build a "key." The key is made of clay soil (it can
be pure clay) and adds strength to the walls. To make a key, dig a
trench (or shallow hole) about lm deep and lm wide in the center of the
places where the walls will be. Then bring clay soil and pack 1t tightly
into the trench. Also put a thick layer of clay soil on the pond bottom
and pack that down tightly. The clay layer on the bottom and the key
run together as shown. This connection of the bottom and the key helps
prevent leaking. The drainage pipe should be placed in the clay lining.
76

fCLkS CORE
("KEY")

r-%-.
'SANDY / f *ft C SANDY AklIW
CLAY LINING
',VJ «v _^S':- • '-SOIL.
• fefe4
•'V'i'-iiw-Z

If the farmer has a son which 1s a mixture of clay and sand, »nd he 1s
not sure 1t 1s strong enough, he nay still wish to build a clay key. Or
he can build a key using the same soil used 1n the wall. This key must
be packed down very tightly.

TAMPED
SECTION*

II"- •'• •' "(1(1, '•' '!""• - ,;" •' "fan ''//'<'.
III!'-
ill/I'-
'•'((i,: 11 IK

The type of soil determines the ways 1n which the pond can be prepared
so water does not leak out (see "Seal the Pond Bottom", next page).

lll'IQI, SAND
v tll,
/Il'" llUK-^l/l,' HU/.MK Hl. l/iff"/to. ft: uin- iwjftt. ci AY * f <""• m"/'.'
 77

The soil also determines the slope of the walls. Soil with a lot of
clay 1n 1t can have a greater slope on the outside wall than on the In-
side wall. A typical wall 1s built with an outside slope of 1:1 and an
Inside slope of 1:2. A slope of 1:2 means that for every change 1n
length of 2m there 1s a change of lm 1n height.

Once the walls are constructed, the farmer should plant grass on them.
The grass roots help to hold the wall together and prevent erosion of
the soil. However, NEVER plant trees on the wall. As the tree roots
grow they will crack and destroy the wall.

Seal the Pond Bottom

The last step 1n pond construction 1s sealing the pond bottom so that
1t does not leak. If the soil has a lot of clay 1n 1t, no special sealing
1s needed. If the bottom 1s sand or gravel, 1t should be sealed to help
1t hold water. One way to seal the pond Is to build a clay core Into
the wall and extend the clay over the bottom of the pond as a lining.
This kind of sealing must be done when the walls are built. After the
walls are built, there are other methods you can use for sealing the
pond.
WALL WM-L

CLAY CORE.

A pond can be sealed using hollow cement blocks, but this 1s expensive.
Another method of sealing the bottom calls for using a sheet H n e r made
of polyethylene plastic, or a rubber liner. The waterproof sheet Is
placed on the pond bottom and around the sides In one piece (the fanner
may have to tightly seal several sections together), then covered with
soil.

Another technique, recently developed 1n the USSR, 1s called a "gley" or

"biological plastic." "Gley" can be made 1n the pond In this way:
. Clear the pond bottom of debris, rocks, and all other materials.
. Cover the pond bottom and sides completely with pig dung.
Apply the dung 1n an even layer.

. Cover the pig dung layer with banana leaves, cut grasses, or
any vegetable matter. Hake sure all the pig dung is covered.
78

. Put a layer of soil on top of the vegetable layer.

. Tamp the layers down very well.
. Walt 2 to 3 weeks before filling the pond.
 79

Preparing the Pond

The last pages of the construction section presented several ways of

sealing the bottom of the pond so 1t will hold water better. This
section tells what has to be done to prepare the completed pond for
the fish.

Conditioning the Pond

If the pond is an old one from which the fish have been harvested, plow
it completely. Plowing turns the ground over so that it dries well.
Clear the bottom of any twigs, stumps, branches, or dead fish. Any pre-
dators (snakes, frogs, etc.) must be taken out by hand or poisoned (see
"Problems of Fish 1n Pond'for more information on this subject). Then
smooth the bottom out again. When the pond is dried enough, the soil
will have large cracks in it.
After the pond 1s plowed, cleared, and smoothed 1t should be conditioned
with lime.

Whether the pond is old or new, a

layer of lime should be placed on
the bottom of the pond. Place the
1ime on the pond two weeks before
the water is put into the pond.

Lime conditions the soil of the pond.

It is not a fertilizer, but 1t helps fertilizers work. It is especially
important to use H m e If the soil has acids in it which might harm the
fish. L1me can control these a d d s so they are not a danger. A farmer
who 1s not sure whether the soil of his new fish pond has acids in it —
80

because he had no place to get his soil tested, or because he has never
farmed the land -- 1s always safer 1f he puts H m e on the bottom of the
pond.
Lime comes 1n several forms: ground limestone; agricultural H m e ;
hydrated (builders') H m e ; or quicklime. Of all these types, hydrated
lime is cheapest to use because 1t 1s more concentrated.

Quicklime mustbe used carefully: it can burn if 1t touches the skin

and is harmful if breathed into the body. Farmers should be warned to
use quicklime only with extreme care.

L1me should be put on the pond bottom at the following rates for a new
pond:

Ground Limestone 1140kg per hectare

Agricultural Lime 2270kg per hectare
Hydrated L1me 114kg per hectare
Quicklime 200kg per hectare
A word about limestone: In many areas of the world, limestone can be
found locally. It 1s a soft stone and may be ground by the farmers
themselves. It 1s a good Idea to let farmers know whether or not lime-
stone is available locally and to help them identify it if they can not
already do so.

Filling the Pond

After the H m e has been on the pond bottom for at least two weeks, let
the water In slowly. The water should fall from the water inlet Into
the pond below, so that the water mixes with oxygen from the air as it
falls Into the pond.
 81

The water should not go 1n too quickly. If the water goes 1n too fast,
the pond bottom will get stirred up and make the water muddy.
Let the pond sit for a few days after 1t has been filled. Then check the
quality of the water 1n the pond -- before adding the fish.

Fish growth depends greatly on the quality of the water used 1n the pond.
And the quality of the water depends upon where 1t comes from and what
kind of soil 1t travels over. Testing the water quality means making
sure that all the factors which relate to water are right for the fish.
These factors are: temperature, oxygen content, pH, turbidity, hardness,
alkalinity, and nutrient availability (source of food for the fish). The
farmer does not need to know these particular words to raise fish well,
but he does require a working knowledge of the factors that are part of
the water world in which the fish live.

TEMPERATURE
Fish are cold-blooded animals; that is, their body temperatures depend
upon the temperature of the water 1n which they live. Every.fish species
has a temperature range within which 1t grows quickly. This 1s called
the optimum temperature range, and I t means that this fish grows best
at temperatures within that range. In a fish pond, the fish should live
at their optimum to grow well. However, since fish have different
temperature requirements, the farmer must choose the fish which will
grow best in the temperature range of his pond.
Here are some of the common pond fish and their temperature ranges:
Genoa, 4pecie4 Common name. TempeAatuAs °C
Tltapia. moaamb-Lca. tllapla 25-35
OiphrionemuA gotamy gouraml 24-28
Puntuu javanicui tawes 25-33
CypiUnut, canpio common carp 20-25
Ctenopha/iyngodon Idtllui, grass carp 25-30
AnguilZa japonica. eel 20-28

This chart shows that all the fish on this 11st could live 1n water that
is 25°C (77°F). The chart also shows that an eel can live and grow well
at 20°C, but that the tllapla and the grass carp will not do well at 20°C
because this temperature 1s below the range 1n which they are comfortable.
When the temperature goes higher or lower than this optimum, fish will
not grow. Eventually, 1f the temperature goes too high or too low,
the fish will die.

The farmer must watch the temperature In the pond water carefully,
especially 1f the weather becomes unusually hot or cold. I f 1t 1s
possible, 1t 1s a good Idea for a farmer to use a thermometer to find
the temperature of his pond water. This can be done by using a
 82

thermometer which 1s used for taking temperatures when people are sick.
The most Important step 1s to guide the farmer to stock fish which will
do well 1n the normal temperature ranges of his area. Then the tempera-
ture of the water will not generally be a problem, except 1n cases of
unusual weather.

H^^^L

Some experienced fish growers can judge the water temperature by putting
their arms 1n the water. Host people cannot tell temperature this way.
But if the right kind of fish has been chosen for the pond, the farmer
need only watch the fish to be able to judge the temperature of the pond
water. If the water 1s becoming too hot, the fish will r.ot eat and will
move very slowly.

If the farmer sees this behavior in his fish pond, he can take out some
of the pond water and put 1n new, cooler water. Another way of pro-
tecting the water from getting too hot is to find a way to shade the pond,
so that the sun does not shine directly on the water. The shading should
be temporary because sunlight is important to the success of the pond.
 83

The picture on the previous page shows a fish pond being shaded by
palm tree branches stuck into the ground around the edges of the pond.
As soon as the temperature of the water goes down, the branches are
removed.

Temperature, however, usually does not act alone. If the fish are
showing signs of distress because of hot weather,' it 1s often a problem
caused by high temperatures and low oxygen content.

OXYGEN
The farmer cannot see oxygen, so 1t may be hard for him to realize
Its Importance. But it Is worth taking the time to help a pond owner
understand oxygen as a critical factor 1n the success of his fish pond.
Oxygen lack is a problem which can occur at any time during fish pond
operation, and there 1s a good chance the farmer will have to depend
only upon his own knowledge of the problem and Its cause to solve it
Immediately.

Fish, like all animals and human beings, need oxygen to breathe and,
therefore, to live. Through a process called respiration, fish and
human beings take 1n oxygen and give off carbon dioxide. Fish will not
grow well when the oxygen supply is low; and if the oxygen level gets
too low, they will die.
Oxygen is a gas. Human beings get the oxygen they need from the air.
They cannot see it, or smell it, but without it they would die. Most
fish can only get oxygen from the water 1n the fish pond. The farmer
cannot see the oxygen in the water either, but he should realize that
1t must be there 1n sufficient quantity for the fish to live.
Oxygen troubles arise in a pond when the supply of oxygen is used up
faster than oxygen 1s put into the pond. This happens to human beings
too -- 1f too many people are shut into a room with no windows or air-
holes, the respiration of all these people uses up the oxygen. Soon,
there 1s too much carbon dioxide in the air. The people have trouble
breathing until a window is opened and fresh air containing oxygen 1s
let 1n.

This 1s exactly what happens to fish 1n the fish pond. The fish are shut
up in the pond, and 1f there 1s not enough oxygen entering the pond,
they will have trouble breathing. And, if the problem continues, they
will die.

Water contains tiny plants and animals called plankton. Host plankton
are so very small that they cannot be seen without using a microscope.
 84

The plants are phytoplankton: The animals are zooplankton:

Ktona. sp.
VictyobphaeMim
puZcheZtum

Water also contains higher orders of vegetation. These plants are much
larger than the phytoplankton.

HycUMZa vtnticittaXa
A favorite food
Kzolta. piiwata
of the gourami.

The fish and the zooplankton use oxygen and give off carbon dioxide in
respiration; the phytoplankton and higher plants use carbon dioxide and
sunlight to produce oxygen during a process called photosynthesis.

The Cycle. o& Kg.tpln.aJU.on

and PhotoiynthuiM
 85

The oxygen 1n a fish pond also 1s used up by the process of decay.

Dead organic matter -- leaves, fish, other plant and animal material
present 1n the pond, use up oxygen in the decay process called
oxidation. Oxidation and respiration go on both day and night, while
photosynthesis can take place only during sunlight hours.
Therefore, there are times during the day when the oxygen levels 1n the
pond can be very low, and oxygen may have to be added to the water.
Oxygen can be added to the pond water by taking out some of the old
water which is low in oxygen and adding new water.

<o
oo A Cloudy Day Can Sometime*
CauAi Oxygen le.ve.li, to Vtop

The new water should be sprayed or bubbled into the pond so that the
water picks up oxygen from the air as it falls into the pond.
Oxygen also can be added to pond water by:
Stirring up the water already in the
pond. Some farmers beat and stir the
water with poles.
86

Some pond owners use oars to st1r*the water.

Other owners rurt small motors

In addition, winds which are strong enough to ripple the surface of the
water 1n the pond help the air and water to mix. Remember: any disturbance
of the water made by man or by nature helps put oxygen Into (aerates)
the water.
Life under the water 1s a new Idea to many farmers. And 1t 1s sometimes
difficult to understand that the balances which exist on land are also
present 1n the water. Oxygen 1s produced and used both above and below
 87

the surface of the water. The f i s h pond does well only when oxygen
production and oxygen use are in balanced relationship.

I f the farmer understands the balance «

how oxygen is added and how i t is used

-;oc
up, he w i l l know how to watch for trouble
before i t happens. For example, i f
the color of the water changes from green
to clear— in a few hours or a day —
the phytoplankton are not producing / \
enough oxygen. I f the f i s h are at the / \

gets warmer, and warm water cannot

.hold as much oxygen as cool water
can.
The following table shows the difference in oxygen levels at various
points in the day. For example, at 8 am, the temperature has remained
steady, but the dissolved oxygen level has dropped to 6.3mg. At 6 pm,
after a sunny day, the dissolved oxygen level is 16.3mg.

This table also shows that on a typical day a pond's temperature

does not vary greatly. This i l l u s t r a t e s why oxygen as a separate
factor is much more important than is temperature.
 88

MEASURED OXYGEN CONTENT COMPARED WITH TEMPERATURE IN ONE PONV

Time of Day Temperature °C Dissolved Oxygen, mg/1

2 am 29 9.8
6 am 29 6.3
10 am 29 6.7
2 pm 30 9.4
6 pm 29 16.3
10 pm 29 10.7

Oxygen is measured 1n either milligrams per liter (mg/1) or parts per

million (ppm). One milligram per liter of oxygen means that there is
one milligram of oxygen dissolved 1n one liter of water. One part per
million 1s approximately equivalent to one milligram per liter.

Fish begin to be stressed when the oxygen level falls below 4mg/l. For
best growth, the oxygen levels should be above 5mg/l, but not more than
15mg/l. Above this level of oxygen, supersaturation often results
(too much oxygen).

Sometimes, if there is a lot of sun and a lot of wind activity at the same
time, and if the temperature 1s low, the water can become supersaturated
with oxygen. Supersaturated water contains more oxygen than water can
normally hold at a given temperature; it is a temporary condition. This
condition can place stress on the fish. However, it does not happen
very often in small ponds because the wind is not usually able to aerate
pond water as thoroughly as it can in a large pond.

To determine the exact oxygen content

of a pond, certain chemicals and >—
equipment are needed. Dissolved
oxygen is usually determined in
the laboratory by the Winkler
Method. Now, however, there are
field kits ava1lable((Hach, LaMotte
These kits are, however, expensive,
and certainly will not be
available to most farmers.

A finJtd <JX j'oA. Tzitlng

Pond UlntzA Co-iti About
$30 W.S.} I
 89

pH, HARDNESS, AND ALKALINITY

These three factors are not the same thing - - each one is a measure of
a certain characteristic or characteristics of the water in a f i s h pond.
Each of these factors can be measured exactly 1f semoles of pond water
can be taken to a laboratory to be analyzed, or i f chemicals are
available for testing the water in the f i e l d . Certainly 1f such
testing is possible, i t should be done.

However, many pond cwners are not able to get their water tested and
they do not have the r i g h t chemicals and equipment to do the tests
themselves. For these people, 1t is best to stress the importance of
using lime in their ponds. Lime is the proper treatment to correct
imbalances in these factors, each of which is discussed in some detail
here.

pH. pH is the measure of hydrogen ions (H*) in the water and is measured
on a scale of 1 to 14. I f the pH is between 0 and 7, the water is
considered to be a d d . I f the pH 1s at 7, the water is neutral (not
a d d or basic). A pH of 7 to 14 means the water is basic. Fish grow
best 1n a pH of between 6.5 and 9.0. Fish are very sensitive to low
pH, or, in other words, to water which 1s acid. Most pond fish w i l l die
i f the pH f a l l s below 4 for a very long period of time.

Sometimes the pH of a pond can change quickly. For example, a heavy

rain may carry a d d f r o m t h e soil in the dikes into the pond water.
The best way to get the pH back to neutral 1s to add limestone
(calcium carbonate) to the water by spreading 1t on the pond bottom
or on the surface of the water. A f i s h l i k e t i l a p i a can tolerate
pH from 3.7 to 10.5, but below a pH of 5, they are stressed and they
w i l l not eat.

Some people measure pH by tasting the water. I f the water tastes sour
or s a l t y , i t has too much acid in 1t. Another way to find out pH is to
know where the water is coming from. I f the water comes from a swamp,
bog, or other place where the water is pretty stagnant and contains a
l o t of decaying material, I t may be acid. Most water, however, has a
pH which is very close to neutral. I f the water comes from a river or
lake, i t 1s not l i k e l y to have a pH that w i l l harm the f i s h . I f the
local f i s h do well in the water, the pond f i s h probably w i l l do well
also.

LCtmiLi PapnA. Some farm owners find out their pH by using litmus paper,
or pH paper. These are t h i n s t r i p s of paper which have chemicals on
them so that they change' color when they are placed into the water. I f
the water is a d d , the paper w i l l turn one' color; 1f the water is basic,
the paper turns a different color. The color on the paper is compared
to a color chart which w i l l give the pH for that color. There are also
electronic meters which measure pH, but these are expensive and not
necessary in a f i e l d s i t u a t i o n .
90

Hardness. Hardness 1s the measure of total soluble salts that are

dissolved 1n the water. These salts, usually calcium (Ca**) and
magnesium (Mg-1^), help the fish grow healthy bones and teeth. Also,
the foods the fish eat, like the phytoplankton, need calcium and
magnesium for growth. Water that contains many salts is called "hard"
water; water that contains few salts is called "soft" water.
Hardness 1s related to the pH of the water, but unlike the pH, hardness
stays constant throughout the day. Hardness can be measured in a labora-
tory or by using a field kit with chemicals. Hardness should be between
50 and 300ppm 1nthe pond for best fish growth.
There are several ways a farmer can tell if he has very hard water without
using chemicals. One method is to look closely at the pond walls where
the water line is. If there is a white line on the wall of the pond
where the water was touching the pond before the water level fell, there
are salts present in the water which have dried on the pond walls. This
water probably has a lot of salts. Hardness is important to fish.

Another way a farmer can tell 1f the water Is hard is to wash his hands
with it at the side of the pond. If the soap takes a long time to lather,
and If the lather does not stay very long, the water 1s hard. If the
water is soft and does not contain many salts, 1t lathers very easily and
1s hard to wash off.
If the water is too soft, the farmer can increase the hardness by adding
lime to the water.

Alkalinity. Alkalinity 1s a measure of the acid-combining capacity of the

water; or it is also called Its buffering ability. Alkalinity measures the
amounts of carbonates and bicarbonates in the water. These are materials
which mix with acid in the water. The result of the mixing 1s that the
acid 1s not as strong. Waters which have an alkalinity of 50 to 200ppm
are the most productive for fish. Alkalinity, like pH and hardness, can
be corrected and controlled by adding lime to the pond. The relationship
among alkalinity, hardness, and pH can be summarized like this:
Low Alkalinity = Low pH = Low Hardness
REMEMBER: THESE THREE FACTORS ARE NOT THE SAME THING, 8UT THEY ARE RE-
LATED. IN FISH PONDS, ALL THREE CAN BE CONTROLLED SY ADDING
LIME TO THE WATER.

TURBIDITY
Turbidity is the term for the suspended dirt and other particles in water.
Turbidity can be a problem, especially in shallow ponds, if the dirt and
particles prevent sunlight from reaching the plankton, so that the phyto-
plankton cannot produce oxvgan. An operating pond can be turbid if there
 91

are bottom feeders such as common carp stirring up the bottom mud. Or,
turbidity can result from a water source which has a lot of silt 1n 1t.
Turbidity can be measured by just looking at the pond water. Or turbidity
can be measured by using a device called the Secchl disc. The Secchl
disc 1s also used to determine the total productivity of the pond.

A SECCHI DISC

WEIGHT^

A Secchl disc 1s about 30cm 1n diameter, painted white and black or

just white, and has weights or heavy objects hanging on 1t to make 1t
sink straight down Into the water. The disc is suspended on a rope or
a long piece of wire that is marked off 1n centimeters from the disc up.
A Secchl disc can be made out of wood or metal -- as long as 1t will
sink. The disc does not have to be very complicated. It does not have
to be round, either. It can be any shape, as long as it has some white
paint on 1t to help 1t be seen under the water. The disc can be made
from a tin can pounded for this purpose.

When the. Secchi disc goes into

the water, it will sink straight
down and disappear from sight at
some depth. If the disc disappears
at 30cm in depth, the pond is not
turbid. If it disappears im-
mediately, either it is very tur-
bid (brown in color), or it is very
f«rt1Ie (productive), if green in
color.
 92

Turbidity also can be measured without a disc, but this requires somewhat
more experience. The farmer stands 1n the pond and sticks his arm under
the water.

If his hand disappears when

the water 1s about elbow
deep, the water 1s not too
turbid. If 1t disappears
before the water reaches the
elbow, the water 1s either
turbid or very productive.
If the entire arm from hand
to shoulder can be seen under
the water, 1t 1s not turbid
at all, nor 1s 1t very pro-
ductive (1t does not contain
enough fish food).

One way to clear up muddy water 1s to scatter twelve bales of hay per hec-
tare around the edges of the pond. The hay will help to settle the mud
and can then be removed easily from the pond edges. However, do not use
this method 1s very hot weather, because the hay will begin to decay
very quickly and will begin to use up oxygen 1n the pond water. If the
pond water continues to have a lot of silt 1n 1t, the farmer should
consider adding a slltatlon tank (see "Construction").

NUTRIENT AVAILABILITY
All fish require certain elements to grow and reproduce. These essential
elements are: carbon, hydrogen, oxygen, nitrogen, phosphorus, potassium,
sulfur, calcium, Iron, and magnesium. Some other elements, called trace
elements, are needed only 1n small amounts. I f these elements are missing,
or present 1n too snail quantities, the fish w i l l not grow well.

Pish Requite a Balanced Viet

o (J Ele.me.nts
Ca.fi.bon Potassuim
Hydlogen Suiiui
Oxygen Calcium
Nitioqen ln.on
Phosphoius Ha.gnesj.um
Plus tiace elements
 93

F1sh get these elements from the pond soil, the pond water, and the
food they eat. Some fish ponds lack elements that are necessary to
fish. In these cases, 1t 1s necessary to add fertilizers to the water.
Fertilizers are simply materials which contain the missing elements.
The elements most often missing, or 1n short supply 1n fish ponds,
are nitrogen (N), phosphorus (P), and potassium (K).

Fertilizers containing these

missing elements are added
to the fish pond to help the
growth of the fish and of
the plankton, the fish use
for food. Fertilization
1s discussed In the following
paragraphs.

Fertilizers
Fertilizers are materials added to the pond to make the water more
fertile (productive). As stated before, fertilization 1s sometimes
necessary to help a pond provide the nutrients directly needed for
fish and plankton growth. As a major food source of fish, plankton
must be kept healthy and 1n good supply.

Fertilizer supplements the elements the pond gets from its own water
and soil. This 1s especially necessary 1n ponds made 1n soil which
has used up the nutrients once available.

A WELL-FERTILIZED POND
A pond which has a lot of phytoplankton is often a bright green color.
This color indicates a "bloom" of algae. In a normal bloom, the Secchi
disc disappears at about 30cm depth; when the Secchi disc disappears
at 20-40cm, the pond is very productive and fertile. No fertilizer
is needed In a pond under these conditions. Also, if the farmer places
his arm 1n the pond and his arm disappears from sight at the elbow,
the pond does not need fertilizer.

There 1s one more condition when no fertilizer 1s needed. Sometimes

a pond can become too fertile. If the Secchi disc disappears at only
15cm, the "bloom" is too thick. The thick layer of green blocks the
sunlight from the pond and no oxygen can be made by the phytoplankton.
94

A/ • • ' / :
\\
^ '
In this case, there is too much
f e r t i l i z e r , and the farmer must
take off some of the thick layer
of algae formed at the top of the
pond and stop using f e r t i l i z e r
until the pond has recovered a
normal f e r t i l i z e r level.

CJDT, -r <-- -r Ox.

< & 5 <Jj55

ZaOPLANkTaN-

;'-"BACTERIA"-'.

WHEN TO FERTILIZE
If the Secchi disc can still be seen at 43cm, for example, or if the
farmer can still see his entire arm from fingers to shoulder under the
water, there 1s not enough plankton. And it 1s necessary to add ferti-
lizer to the water in order to prepare the pond for the fish.
One other factor which determines the need for fertilizer is the quality
of the soil. If the soil is very productive, the need for fertilizer
is small; 1f the soil 1s not productive, the need 1s greater. A farmer
should know that the fertilizer he uses on his fields, If he uses one,
can also be used in his fish pond. The fish pond soil 1s often very
like the soil of the fields around 1t.

TYPES OF FERTILIZERS
The kinds of fertilizers used in fish ponds vary greatly, depending on
the amount of money which can be spent and what 1s available. Many
fish pond owners use organic fertilizers, or fertilizers that come
from living things; such as cow dung—because 1t 1s available on their
farms. Some big pond owners like Inorganic fertilizers, or chemicals
made by man, H k e the superphosphates. But these chemical fertilizers
are expensive and sometimes hard to get.
Choosing fertilizer can be difficult. The following paragraphs provide
more detail about organic and Inorganic fertilizers and some guidelines
to the proper use of each.
 95

Organic F e r t i l i z e r s . Organic f e r t i l i z e r s can be plant or animal

products, such as:

VigeXabli mXttn.. Chopped up manioc, sweet potatoes, or banana leaves

kang kong, guinea or napier grass, or other such things that have been
allowed to r o t for a while. The amounts of vegetable matter used as
f e r t i l i z e r can be as high as 5,000 kg/ha.
LLqwid mutate. Mostly animal urine containing uric acid, a source
of nitrogen. I t is washed out of stables Into the ponds and used
1n very small amounts by mixing 1t with other organic f e r t i l i z e r s
such as cow manure.

HoubtSwZd lowpa. Including garbage, grass cuttings, rica husks, and

human sewage, also called "night s o i l " .
AnanaZ manure. Includes cow, chicken, duck, sheep, and horse dung. The
best way to use this kind of f e r t i l i z e r is to make a "soup" of i t in a
tank by mixing i t with water. Use the l i q u i d part of the "soup" i n the
pond. Animal manure can also be placed 1n a burlap bag hung from a
stake in the water. This way, the nutrients from the manure w i l l be
released slowly Into the water without the manure i t s e l f clogging up
the pond bottom. I f this cannot be done, then p i l e the manure in
the comers of the pond. Do not use too much manure; decaying manure
uses up the oxygen in the pond - - p a r t i c u l a r l y in hot, humid climates.

The best way to use these sources of f e r t i l i z e r is to mix them a l l

together in what is know as a compost p i l e . A compost pile is simply
a pile of these organic matarials which has been l e f t to r o t . As
the materials decay together, they produce a substance which is a
very good f e r t i l i z e r . Compost piles are important: they provide the
very best kind of organic f e r t i l i z e r for fish ponds ana, in many cases,
they cost nothing.
96

Making a Compost Pile

For many years, compost has been made this way:

. Pile organic matter, such as leaves, straw, grass, rice husks

or other plant material and household scraps about 30cm high.

. Put a layer of animal manure (chicken, cow, duck, horse, sheep, or

goat) on top of the first layer.
. Sprinkle ashes and lime on the manure.
. Repeat these layers of plant material, manure, ashes and lime
until the ?i~e Is about 1.5m high and 1.5 m wide.
. Keep the pile moist, but do not let it get wet.
. Turn the pile every three weeks with a shovel for about 3 months.

. Use the pile in 3 months. It will have decayed and shrunk to

about 1/10 of Its original size. -
 97

There 1s now a faster way to make the compost ready to use as f e r t i l i z e r .

. Make the same 1.5m x 1.5m p i l e of plant material, manure, and

lime. This time, however, use more household garbage and animal
manure. (Animal manure supplies nitrogen, an element used by
plants during the decay process. A good compost mixture 1s about
1 shovelful of manure to 30 shovelsful of the other organic
materials.)

. Mix the material well. Then cut a l l of 1t into small pieces, using
a shovel, macheta, scythe, etc. The pieces should be about 3 to
5cm long. Cutting the matarial speeds the rotting orocess. ( I f
animal manure is hard to get, add some inorganic f e r t i l i z e r contain-
ing nitrogen to the ccmpost p i l e . )

. Turn the pile every few days. Use a shovel to keep i t well-mixed.
Compost piles can get too hot in the middle i f they are not turned
and mixed. Put a stick into the middle of the p i l e . Leave the
stick in the pile for 3 minutes, and then pull I t out. I f the stick
1s hot, dry, or smelly, the pile must be turned so that the inside
of the pile 1s now on the outside.

. Keep the p i l e moist, but not wet. Protect i t from the rain. Animal
urine can be used.to keep the p i l e moist and helos to add nitrogen
to the p i l e . A compost p i l e made in this way w i l l be ready f o r use
in only 3 weeks.
When ready, pile the compost in the corners of the pond and restrain 1t
with a screen; or cover the compost with a layer of mud to hold the
plant material In place so 1t does not f l o a t into the pond. The compost
releases i t s nutrients Into the pond water gradually.

APPLICATION RATES
F e r t i l i z e r should be applied at a rate determined by the area of your
pond. Area is the length of the pond multiplied by the width. For

WIDTH

LENGTH
98

example, if the oond is 10m wide by 20m long, it has an area of 200
square meters ( m 2 ) . This is equivalent to 2/100 of a hectare. The
measurements used for pond area are:

1 are « 100m2
1 acre » 40 ares • 4000m'
1 hectare » 100 ares = 2 . 5 acres = 10,000m2

To fertilize a 200m2 fish pond with chicken manure, at a rate of 200

k9/ha, you must only use 4 kg as follows:

200m2 - x : 200 (200) » X ; X = 4 kg

lO.OOOm^ 200 kg/ha 10,000

Most ponds are not as big as one hectare, so the farmer w i l l have to
determine his pond's area before using the manure. I t w i l l be hard for
most farmers to calculate application rates in this way, but i t is
probably easy for you to develop some standard measures a farmer can
use which are based on the average-sized pond in your area.

Often fish ponds are managed in conjunction with other animals. Stables
are b u i l t r i g h t over the edge of the ponds, and the manure and urine
from a certain number of the animals are allowed to f a l l d i r e c t l y into the
pond. This e f f i c i e n t system works well for f i s h which can use animal
manure as fish food. This system gives large crops of healthy f i s h . Fish
ponds which share the area with a number of ducks show high yields of both
ducks and f i s h .
 99

For the f i r s t f e r t i l i z e r added to a new pond, some common rates of

application of animal manures are:

Cow dung 1000 kg/ha

Chicken dung 114-228 kg/ha
REMEMBER: Except for compost f e r t i l i z e r , only one kind of f e r t i l i z e r
is needed at one time in a pond. Only use one of the application
rates each time the pond 1s f e r t i l i z e d , or the equivalent of one r a t e .
That i s , either use 1000 kg/ha of cow dung, or use half cow dung and
half chicken dung (500 kg/ha cow * 114 kg/ha chicken dung). After you
f e r t i l i z e keep an eye on the pond. Try not to over f e r t i l i z e - - too
much 1s just as bad as not enough.

After the f i r s t application of f e r t i l i z e r , application rates do not

have to be as high. Many older ponds do not need as rnuch f e r t i l i z e r
because the natural l i f e of a pond tends towards becoming more f e r t i l e
the older 1t gets. However, each time the fish are harvested they
take part of the pond's productivity with them. That is why older
ponds are s t i l l f e r t i l i z e d - - even though they may need less f e r t i l i z e r
than new ponds.

Inorganic F e r t i l i z e r s . Inorganic f e r t i l i z e r s are chemical f e r t i l i z e r s

that dissolve in the pond water and provide their nutrients immediate-
l y . Originally, inorganic f e r t i l i z e r s supplied nitrogen, phosphorus,
and potassium, and they were called the NPK f e r t i l i z e r s . Some typical
NPK f e r t i l i z e r s were8-8-2 (NPK) and 20-20-5 (NPK). This simply
referred to the mix of f e r t i l i z e r that each bag supplied; for example,
8 measures of nitrogen, 8 measures of phosphorus and 2 measures of
potassium. Recent studies show that is enough phosphorus is available,
the plants 1n the pond produce their own nitrogen, and that potassium
1s present already 1n small amounts in f i s h . Presently, the only
element needed by fish that may be lacking in the fish pond is the
element phosphorus.

Now, the most common inorganic f e r t i l i z e r s used in fish ponds ire the
phosphorus f e r t i l i z e r s — basic slag, powdered single superphosphate,
granular double superphosphate and t r i p l e superphosphate. Some of
these f e r t i l i z e r s can last as long as three years in the pond, so even
though they are expensive i n i t i a l l y , they are often used in fish ponds.
Research shows that the best fish growth occurs when phosphate f e r t i -
lizers and organic f e r t i l i z e r s are'used together.
100

Application rates of phosphate fertilizers are:

Basic slag 25-30 kg/ha
Single superphosphate 114 kg/ha
Granular double superphosphate 57 kg/ha

Fertilizers have one purpose—to provide better growth of fish 1n ponds.

Many organic and inorganic fertilizers are good. Watch the pond care-
fully for signs concerning a need for fertilizer. As long as the water
1s a green color, the pond 1s 1n good condition. Remember: 1t Is
always best to do two things at once—wherever possible use fertilizers
which can be used as food by the fish.
Now that the pond has been filled, the quality of the water tested, and
the fertilizer added, the last step 1n preparing for the fish 1s to
make sure that the food supply 1n the pond 1s sufficient for the fish
that will be put into the pond.

Foods
It 1s important to be sure that fish have good food. Feeding and
fertilization work together to make Jhe pond successful.
The growth of fish In ponds is directly related to the amount of food
available 1n the pond. The pond must provide all the food and nutrients
fish need. But all fish do not need the same kinds of food: different
species eat different types of food, and fish eat different foods de-
pending on the stage of their life cycle.
Newly-hatched fry eat from their yolk sacs until the sacs are gone.
The fry then eat the smallest phytoplankton 1n the pond. As the fry
get bigger, they can eat bigger foods. Adult fish eat the things that
their particular kind of fish enjoy—plankton, higher plants, worms,
insect larvae, etc.
 101

F1sh foods can be natural (those found naturally in the pond) or sup-
plementary (those foods added to the pond).
Natural Foods. These foods are the phytoplankton, zooplankton, detritus,
snails, worms, insects and insect larvae, small plants like duckweeds
and various other weeds and grasses that can be found in a fish pond.
(See illustrations of Natural Foods at the end of this section.) Also,
if the fish is carnivorous and eats the flesh of other animals, small
fish are also a food source.
Some fish eat all these foods; some prefer only one kind of food.
Often a fish will choose one kind of food over another, even though
either of the foods would be eaten by the fish if the other food were
not available. Natural foods are the best foods for fish. The farmer
should encourage, as much as possible, the growth of these natural
foods — through maintaining the quality of his water, proper fertiliza-
tion of the pond bottom and the water, etc.
Sometimes, however, the farmer must add food to the pond because the
pond is not producing enough food for good growth. The best supple-
mentary foods a fanner can put into the pond are extra natural•foods.
But there are a great number of other foods which fish will eat.
Supplementary Foods. Almost anything can be used as a supplementary
food, depending on the fish species in the pond. Typical supplementary
foods are: bread crumbs, rice bran, fish meal, ground-up maize,
broken rice, soy bean cakes, peanut cakes, sweet potatoes,
guinea grass, napier grass, kang kong, manioc, water hyacinth, wheat,
silkworm pupae, and left-over animal feeds and some animal manures.
As stated previously, the kind of extra food depends on the kind of
fish. Tilapia, for example, will eat almost anything, including the
supplementary foods listed above. This 1s one reason why they are
such very good pond fish. The silver carp, on the other hand, will
eat only phytoplankton, even when it is a fish of marketable size.
The farmer must know what his fish will accept before he puts the
fish into the pond.

NOTT TO DEVELOPMENT WORKERS

some of these supplemental foods are better at encouraging growth than
others. The value of each food is measured in terms of how quickly
and well it can help the fish gain weight. The amount of a food that
can be converted Into fish flesh by the fish is called the conversion
ratio. And because these foods are given to help the fish grow, each
food has what 1s known in various places as a growth co-efficent, food
quotient, or its nutritive ratio.
102

The food quotient 1s figured by dividing the total weight of the food
by the total Increase 1n weight gained by the f i s h over a period of
time. This 1s done as follows:

Food Quotient » weight of food given

increase in weight of f i s h

For example, a f i s h weighing lOOg 1s fed a supplementary food at a

rate of 51 of his body weight, or 5g per day. The f i s h weighs 160g
at the end of a 30-day period. Therefore, the food quotient of this
particular food i s :

Food Quotient = 5g (30 days) • 150

(TSu-lOOg) "57

Food Quotient « 2.5

In other words, the f i s h has been able to use about 2.5g of food to
gain l.Og of weight a day. This is a good conversion r a t i o .

The table shown here l i s t s food quotients of some kinds of supplementary

foods used with conmon carp. The lower the value of the quotient,
the better the food was used by the f i s h . For example, dried silkworm
pupae help the f i s h grow faster than do fresh silkworm pupae. REMEMBER:
the conversion of foods depends upon the a b i l i t y of the individual
f i s h to use the food given to i t . And that a b i l i t y d i f f e r s according
to species.

FOOD QUOTIENTS OF COMMON CARP FEEDS

FOOD FOOD QUOTIENT

Fresh silkworm pupae 5.0 - 5.5

Dried silkworm pupae 1.3 - 2.1
Chironomlds 2.3 - 4.4
F1sh mea1 1.5 - 3.0
R1ce bran 5.1
Soy bean cake 2.2
Clam meat 1.3
Cottonseed cake 3.0
Dehydrated blood 1.5-1.7
Maize 4.0 - 6.0

Soa/tce..: SaAxiazk, t£. at. , AquacxttnAe

 103

It will be hard or Impossible for many farmers 1n your area to figure

these ratios and quotients. For the fanner who 1s new to the effort
and has few resources, 1t may be a good Idea to direct M m to the
supplementary foods having the best conversion ratios for his fish.
 104

natural foods
phytoplankton
Ttiach&lomonab volzu.

StauAab-Vum chcuutoctAoi 'huxbatnopili tanganyikai-

?e.lidin<jum votzLL
Scinndumui sp.

Victyo&paeJu.um pwtcheXhm
HicAocyitiA aejuigino&a

zooplankton

Nauplius of Cyclopi

^1

A£omi sp.
Biachionai sp
 105

higher plants

LEMNA POLXRRHlZA

VALLISNERIA

CERATOPHYLLUM E'lCHORNIA

MARSILIA
QUADRIFOUA
CHAR/V
106

JUSSlAEA REPE.NS

HYDRILLA

A20LLA PJNNATA

snails

A\ LYMNAEA SP

My &I0N\PHMARIA

?HYSOPSlS SP

CLEOPATRA SP
MELANOSES S?

PI LA SP
 Managing the Pond

I t should be clear by now that much of the success of a fish pond depends
upon careful planning. Before the farmer could build the pond, i t was
necessary for him to think through why he wanted the pond — for food,
profit, or both, what kind of ponds he could build on his land and what
kind or kinds of fish are best suited to his climate and pond conditions.
Only when all these factors were thought out could the pond be built.
Now, with the pond constructed, fertilized, and otherwise prepared for
the fish, the farmer 1s ready to put the fish into (stock) the ponds
and get to the business of raising fish.

Stocking
Stocking is the word used to describe the act of placing the fish (stock)
into the pond. The stocking density is used here to refer to the total
number of fish which .can be put into (stocked) in a pond.

Good Stocking Venilty * Good Fl&h Giouxtn

108

The stocking rate 1s the term used to refer to the number of one species
which are put Into a pond. Therefore, 1n a monoculture pond, the
stocking rate 1s the sane as the stocking density because there is only
one kind of fish.
In a polyculture of Chinese carp, however, the stocking density, or the
total number of flngerllngs, may be 20,000 per hectare. Of this total,
the stocking rate looks like this: grass carp are stocked at a rate
of 5,000; 5,000 are blghead carp; 10,000 are silver carp.

Stocking rate and density are Important. There Is only enough food and
room 1n a pond for a certain number of fish. The good growth of fish
depends upon putting the right number of fish Into the pond.

The age of the fish must also be considered when stocking ponds. For
example, more flngerllngs can be placed 1n a pond than brood fish, because
flngerllngs require less food per fish than brood fish. If the food
available 1n the pond is not supplemented, proper stocking rates and den-
sities are even more important.

STOCKING DENSITIES
The farmer must know how many fish he can put into his pond so that he
can get the right number--e1ther from the market or from a local stream
or lake. He should remember, when he decides upon this number, that
some of the fish will d1e--both when they are put Into the pond and
later. The following paragraphs provide some guidelines to use when
stocking a pond with some of the more common pond fish.
Common Carp. Stocking densities differ with the age and size of the
fish. In general, the more volume of water a carp has, the better is
its growth. This assumes that the pond contains enough food, and the
water temperature 1s right. The best growth of common carp has been
shown with stocking densities of about 10,000 to 20,000 fish per
hectare; more with fry; less with post-flngerlings. Some ponds use
 109

running water, and 1n these ponds,they have been able to stock up to

850,000 fry per hectare with only a 20? mortality rate.

T1lap1a. T1lap1a have been stocked 1n amounts ranging from 1000 fish
per hectare to about 50,000 fish per hectare when supplementary food
was provided. But stocking densities really depend on the rates of
reproduction of tllapla, and whether they can be separated by sex or not.
Chinese Carp. In general, the stocking rates can only be found by trial
and error, and often will be different from time to time, depending upon
the availability of fry. In Malaysia, a ratio of carp stocking has been
suggested of 2:1:1:3 for grass'carp, blghead, silver carp and common carp.
This means that 1f there were a stocking density of 7 Chinese carp, 2
fish would be grass carp, 3 would be common carp, and there would be only
one each of blghead and silver carp. This 1s a good stocking rate for
this density. The density for a given pond has to be figured In terms
of what the pond can support.

Indian Carp. Stocking densities of Indian carp are not widely known.
Some densities range from 4,000 to 11,000 fry or flngerllngs per hectare,
but again, the density depends upon the amount of food available to
the fish.

When stocking ponds to produce market-size fish, remember that the more
fish stocked, the more food must be available for the best possible
growth 1n ponds.

The following paragraphs describe the proper methods for carrying new
stock from the market or river to the pond, and for placing them into
the pond.

STOCKING FISH IN PONDS

There are some general rules which apply when bringing fish from one
place to another:

. do not handle the fish too much

. make sure the fish get enough oxygen
. keep the fish from getting too warm or too cold
. stock or transfer fish in the early morning when temperatures
are lower and the fish are less active.
If fish are stocked so that there 1s enough oxygen, no tetiperature
difference between the stocking water and the pond water, and they are
not touched, the fish will not be stressed and will survive the stocking.
Here are more details concerning the stocking of fish at different
stages 1n the H f e cycle.
 no

When fry are being moved for a short distance only, for example, from
a nursery pond to a rearing pond, they usually are carried 1n small plas-
tic or metal tubs, or 1n baskets.

CONTAINERS FOR TAKING

FRV FROM ONE POW TO ANOTHER

To move fry successfully:

Scoop the fry out of the river or pond in jars, cups, or
small nets.

"I//'/ -&T-7 '

 Ill

Put the fry Into a bucket of water.

Carry the bucket to the pond where
the fry will be placed.
Check the temperature of the water
1n the bucket; 1t should be the
same temperature as the water in
the pond where the fry will be
stocked.

. Add water from the pond to the bucket slowly ~ until the
temperature of the water in the bucket is the same as the
temperature of the water in the pond.
. Tip the bucket slowly into the pond, and let the fry swim
out into the pond themselves.
REMEMBER: SOME FRY WILL DIE EVEN WHEN HANDLED VERY CAREFULLY. THIS IS
TO BE EXPECTED.

Moving Fry for Longer

er Distances. If the fry. are to be taken from a
market or river which requires a few hours travel or a long distance,
they must be protected better. One method, which can also be used
for fingerlings (and some small adult fish), is to:
. Place fry Into plastic bags filled 1/3 with water.
. F111 the rest of the bag with oxygen. The oxygen is
put into the bag with a hose placed directly into the
water so that the oxygen bubbles into the water.
112

Tie the bag tightly so that the

oxygen does not leak out.

Place the plastic bags Into tin boxes or cardboard boxes

or in grass, woven bags. These containers give added
protection.

Change the water in the bags after 6 hours. The oxygen will
\ast only that long.
Hake sure the bags do not get too hot and that the tempera-
ture of the water in the bags stays at about the same
temperature as the water from which the fingerlings or
fry were taken.
 113

. Place the bags 1n the pond unopened until the"water temperature

Inside the bags is about the same as the temperature in the pond.

. Open the bags and let some pond water 1n.

. Let the bag fill up slowly, and the fish will swim out into the
pond by themselves.
This process may take a little while, but it is far better to take the
time than it is to lose the fry. NEVER POUR FRY INTO A POND. This will
shock them and kill them all.

Stocking Flngerlings. Flngerlings are stocked in the same way as fry.

Always remember that the water 1n their container must be at the same
temperature as the water 1n the pond. Then let the flngerlings swim out
of the container Into the pond by themselves. DO NOT POUR FINGERUNGS
INTO THE POND. They may die because of the shock of hitting the water
or the sudden change of temperature. Some flngerlings will die during
stocking. But usually these are the weaker fish. Careful handling will
mean less loss of flngerlings, as well as fry.
114

Stocking Adult Fish. Adult fish are a little more difficult to stock
than fry or fingerllngs. First, they are large (from 0.5kg up to
3.0kg) and can Injure people and themselves by jumping out of containers
or ponds when they are being carried or caught. For example, Chinese
carp often hurt themselves this way. This problem 1s controlled by
placing a net of some kind on top of the container so they cannot jump
out.

To move fish from one pond to

another, or from a pond to a con-
tainer, make a carrying cradle.
Use fishnet and pieces of wood or
bamboo for handles. The cradle 1s
placed around the brood fish in
the water. Then the fish can be
lifted out of the water and carried
to the new pond or to the container
for transporting. There the cradle
1s released and the brood fish
swims away. Brood fish must never
be thrown into a pond.

Adult fish often are nervous when being taken from one place to another.
Some pond owners even put a hand or a handkerchief over the fishes' eyes
when they are carried. Care is necessary when handling, however:
brood fish particularly are sensitive
to being handled. They bruise easily
if they are held tightly, and the
bruises can become sites for infection.

Brood fish are often carried in tubs

or drums half-filled with clean, well-
oxygenated water when they must be
carried a long distance. Change the
water often and check the water temper-
ature each time. If the brood fish
are very active, mix a solution of 1
to 4 grams per liters of urethane in
the water. This will make the fish
slow and less active, so they can
be moved without injury.
 115

Routine Pond Management

After the ponds are stocked, ongoing management of the pond includes:
. feeding and fertilizing as necessary
. keeping the pond 1n good condition
. watching for trouble and disease

Each pond, whether it is small or large, one pond or one of several,

requires supervision in the above areas. And good management requires
that checks of the condition of the fish and the pond be a regular
part of the pond owner's day. Guidelines for both daily and monthly
general maintenance are given here. Then, since fish 1n ponds are
treated somewhat differently depending upon their species, and their
stage in the life cycle, more detail on managing fry and flngerlings
and managing brood stock 1s given.

DAILY MANAGEMENT
Ponds and the fish in them must be taken care of every day. It is a
good Idea to have the pond owner follow a checklist of things to do.
Daily care will greatly lessen the chance that something will go
wrong in the pond.
A good checklist might look like this:
. check the pond for leaks
. clean filters
. watch fish behavior near the feediir: -u-^a
. feed the fish
. add fertilizer, if necessary
. watch for predators

IMPORTANT: Check the ponds at the same time each day. Early morning
is the best time because oxygen levels in the water are lowest then,
and the fish are more likely to have trouble at that time of day--if
they are going to have trouble at all.

Each step on the checklist involves certain activities and is discussed

in more detail here.
Checking for Leaks. Check all walls, gates, inlets,and outlets. It
is possible for a plug on a drainage pipe, for example, to work loose,
or partly loose, so that water leaks from the pond. Walls made of
hard-packed earth can erode (wash away), especially after heavy rains.
Little leaks get larger quickly. It is important to be sure the
farmer realizes that 1n a pond only 2m deep, for example, loss of
even part of the water can create problems for the fish.
116

Cleaning Filters. Again, this 1s very Important. Any filters 1n the

pond must be removed and cleaned of silt, leaves, or other materials
that have collected 1n them. A dirty filter at the outlet pipe
could slow down the drainage process.

Watch the Fish. A farmer can tell much about his fish by watching
them carefully. If they are swimming quickly and easily around the
pond, they are well. If they are waiting near the surface, they are
likely to be hungry. If they are gasping for breath at the surface
of the water, there is not enough oxygen and the farmer will know he
has to act quickly to aerate the water 1n the pond.

Feed the Fish. Remember: in some ponds 1t 1s not necessary to feed the
fish extra food. The pond can be made rich enough to fill all the
food needs of the fish. However, some ponds and some fish require sup-
plemental feeding. And, sometimes, even a pond which has provided
enough food before has to have food added to 1t.

Supplementary foods are given by:

. spreading the food over the water's surface, as with

bread crumbs and rice bran
 117

placing food inside a floating bamboo cr rope feeding

ring (which 1s attached to the bottom of the pond)

pressing food into dry pellets which float in the feeding

ring or fall to the bottom under the ring

Guidelines for Feeding Fish

Here are some good guidelines for feeding fish which might prove useful
to the farmer:

. Always feed the fish at the same time and in the same part
of the pond. The fish will learn where to go to get food.
Then, when the fish come near the surface of the water, in-
side the feeding ring,for example, the farmer can see how
well they are eating and growing.

. Do not overfeed. Give only the amount of food the fish

will take at one feeding. Too much food will not get
eaten, but will decay and, therefore, will use up valuable
oxygen from the pond during the decaying process.

The amount of food can be found by experience. And of

course, the younger the fish, the less food they will need.
A farmer 1s wise to start with a smaller amount of a food.
Then, if the fish seem to be waiting near the surface in
the feeding area, he will know more food is required.
118

There are more exact ways to determine how much fojsd to feed
the fish. Host pond owners feed fish at the rate "of 2 to
5% of body weight per day. Therefore, 100 flngerllngs
weighing 6g each (a total weight of 600g) would receive
5% of 600g, or 30g of food a day. One hundred fish of
breeder size weighing 1kg each, (total weight 100,kg) would
require 5kg of food a day.

Making such measures and calculations 1s not possible

for many farmers. Therefore, 1t 1s best that they know
which foods to give, how to give them,and how to judge when
the fish are or are not getting enough food.

. Feed fish only 6 days each week. This w i n give the fish
a chance to feed on whatever food remains 1n the pond.
Too much food can clog the gills of fish, particularly
those fish who eat only very fine particles of food.

. Do not feed fish for at least one day before harvesting

or breeding them. When the fish eat, they void (empty)
the waste from their bodies Into the water. This hap-
pens even more when the fish are stressed. The combina-
tion of food and wastes makes the water turbid and
Increases the stress that 1s already placed on fish by
the breeding and harvesting processes.
. Feed the right kinds, of foods. Some fish will eat almost
any of the foods mentioned 1n the section on'Preparing the
Pond." Other fish are not as easy to please. The farmer
will have to experiment with supplemental foods. If he
gives food one day and it is not eaten, he should stop
that food and try another. Again, if he starts with
small amounts only, he is not likely to run into trouble.
While 1t 1s a good idea to test those foods most avail-
able to a farmer, here are some guidelines to feeding a
number of pond fish.

Common Carp

Common carp feed well on the natural food produced in the pond. However,
pond owners often give common carp supplementary food,so the fish will
gain weight quickly. Some good supplementary foods for common carp
are dried silkworm pupae, fish meal and clam meat. However, these carp
will eat almost anything. Suplementary foods such as these are not
necessary. The best way to increase common carp growth rates is to
fertilize the pond well so that the pond produces a good supply of
natural food for the carp to eat.
 119

Tilapia
Not much 1s known about the feeding habits of some of the tllapla,
for example, Tllapla nilotica. Tilapia mossambica and Tilapia zillii
are used to control filamentous algae, which Is a habitat for mosquito
larvae, thus the tllapla 1s used to help with malaria control.
Tilapia are hardy and accept many foods. Most tilapia ponds can be
managed in much the same way as carp ponds.

Chinese Carp
Chinese carp fry eat plankton, so it is important that they be placed
in a well-fertilized pond with a good supply of natural food. Fry
can be fed supplementary foods after a while. These foods include
egg yolk which is strained through a cloth into the pond, soybean meal,
rice bran, and peanut cake. Once the fingerlings get larger, they can
be fed like common carp.
Remember, however, that the small pond owner is likely to have Chinese
carp as part of a polyculture. If the polyculture has been planned
wisely, the Chinese carp will not need to be fed extra food.

Indian Carp
Young f r y of Indian carp, l i k e a l l carps, feed on the plankton in the
pond. Normally fish ponds In India are f e r t i l i z e d by draining the
pond and drying, then adding a f e r t i l i z e r made of some animal manure
mixed with o i l cake at the rate of 200 to 325 kg/ha. This produces a
good bloom of plankton for the newly hatched f r y . However, i t has
now been shown that the Indian carp prefer zooplankton, though sometimes
they are given supplementary foods. After the fish reach fir.gerllng
size, no supplementary food is given.

Note that in any pond, the f i s h can be kept healthy, well-fed and
growing well by making sure the pond 1s w e l l - f e r t i l i z e d so that i t
produces Its own food. As a general r u l e , i t 1s better for most small
farmers to work at keeping their ponds well f e r t i l i z e d or to find
natural foods which can be added to the pond. Most small farmers do not
have extra foods to share with f i s h , but they do have access to organic
f e r t i l i z e r materials, such as manure.
120

Fertilize the Pond. The section on "Preparing the Pond" discussed

kinds of fertilizer, so the farmer should already be familiar with
what fertilizers can be used 1n ponds. Again, the right fertilizer
is a matter for experiment and experience.
The farmer has already used fertilizer before filling the pond. Now
he must watch the water carefully each day. If the healthy green
color of a fertile pond 1s not there or 1f the water has become
brown, fertilizer 1s needed. Fertilizers are applied depending upon
what kind they are: REMEMBER: organic fertilizers do not provide
their nutrients right away; inorganic fertilizers work very quickly.
A farmer who uses mainly organic fertilizers would probably be wise
to keep some amount of inorganic fertilizer on hand for those times
when he needs the fertilizer to work quickly.
Fertilizers are added to the pond in a number of ways;
. Leaves, grass, and animal manure may be left in piles
around the inside edges of the pond. This 1s probably
not a good way to fertilize 1n a hot, humid climate
where the faster decay process would result 1n faster
use of oxygen.
. Liquid manures and "soups" are dipped into the pond
around the edges or in the deepest water.
. Powdered fertilizers (chicken manure, superphosphates)
are broadcast (sprinkled) in a fine layer over the
entire surface of the pond.
 121

Some fertilizers are left on platforms 1n the pond.

The platforms are submerged near the surface of the
water and confined behind a screen.

Watch for Predators. Check the pond area for signs of snake holes,
rat burrows, eels, and strange fish which may have entered through
holes 1n an Inlet screen for example. Any of these can be very
dangerous 1n a fish pond, particularly to a pond containing fry or
small flngerllngs. Make sure fences which protect ponds from farm
animals who might eat grass off the walls or break down the walls of
the pond have no breaks 1n them.
Not each of these things will require much time each day. But a good
pond manager will at least check each of these Items dally.

MONTHLY MANAGEMENT
Ponds which are managed well day by day will require little other
treatment. However, the following things will probably require more
careful attention every month or so:
. Check the pond walls. Cut grass which Is too long or
plant more, 1f necessary.
. Check the pond bottom. If there Is too much buildup of
silt and organic matter, shovel or scoop this material
out.
 POND BOTTOM

Check for and remove weeds or other growth which might be

a problem at harvest tine or when a net 1s used 1n the pond.
Give the walls and Inlet and outlet systems an especially
careful check for leaks and for blockage. Hake sure the
water can flow smoothly 1n and out of the pond, so that
if water needs to be put 1n or taken out quickly, there
will be no problem.
Check the fertility and turbidity of the water. Even a
pond well-fertilized at the beginning may need more ferti-
lizer after a month of operation.
Check the fish carefully for signs of disease. If all has
gone well during the month—the fish have gained weight
and their gills are a healthy red color--the chances are
that all is well. But the fish should be checked especially
carefully for signs of disease each month. (See'Problems
of Fish Cultured in Ponds.") It does not take long for a
disease to infect an entire pond full of fish.
 123

. Add H m e 1f needed. If the farmer has been adding

fertilizer and feeding his fish regularly, but the
fish still do not seem to be gaining weight well or
moving in the water well, the water quality may
need adjusting.

Good management 1s a key to a good fish harvest. It is important for

the farmer to realize this and to work fish management into his
daily schedule. But this is not always easy for him to do. In many
parts of the world, farmers let their 'animals manage themselves, I.e.,
find their own food, etc. This will not usually work with a fish
pond. Fish cannot be put into ponds, left alone, and expected to
grow and provide food and income. Successful fish pond operation re-
quires active attention by the farmer.

The management guidelines just described apply to all fish ponds,

regardless of type of fish or stage of growth. There are, however,
some differences between managing a fry or flngerling pond and managing
brood stock. So these differences should be looked at more closely
here.

Management of Fry and Fjngerlings

There are several ways to get fry. If the farmer is breeding fish,
then he will have his own source of fry to bring to the rearing ponds
from the smaller nursery (hatching) ponds. If the farmer has a small
backyard pond, where he raises fish from fry or fingerllngs to market
size,he either gets his young fish from a market or another farmer
or scoops them out of natural waters.

Wherever the young fish come from,

it 1s important for a pond owner to
know how many fry or fingerllngs he
is putting into his pond. If the
owner knows how many fish are going
into the pond he will know at har-
vest time how many fish died (the
mortality rate) before they were
ready for harvest. This information
can help the farmer make decisions about his management of the pond.
If, for example, more than half of the fish in a pond died between
the time they were put in as fry and the time of harvesting for
market, too many fish are dying; the farmer ought to find the reasons
why before he begins again.
124

Fry are very delicate and must be handled gently. Here 1s one way of
counting them:
. Take a basin or tub of which you know the size (50-100 l i t e r s )
. Put a l l the fry Into this basin.
. Scoop up fry Into a 200-250ml measuring cup.
. Count the f r y 1n the measuring cup by slowly and gently
pouring the fish back Into the basin.
. Estimate the total number of fry 1n the basin by setting up
a ratio l i k e t h i s .
number of f r y in measuring cup = volume of measuring cup
number of f r y in basin (total) = volume of basin
For example, a measuring cup of 250ml holds 100 f r y . Therefore,
1t 1s estimated, using this formula, that a 501 basin f u l l of
f r y hold 20,000 f r y .

Here is another way of counting f r y which 1s somewhat easier because

1t does not depend upon cups and basins of any particular size.

. Put a l l the f r y into an old conta1ner--an old metal garbage

can, an o i l drum, a washtub.
 125

. Get an old milk can, or some other smaller container, and

make sure one end is cut off.
. Fill the smaller container with strained water.
. Hark a line on the garbage can to show the level of water
being put in.
. Fill the milk can and pour the water into the larger can.
. Continue to fill the smaller can and dump water from 1t Into
the larger can.
. Count ho* many small cans of water 1t took to fill the larger
can as high as the line drawn on the can.
. Fill the smaller can with fry and count them carefully.
. Estimate the number of fry by multiplying the number of fry
in the milk can by the number of cans it takes to fill the
large container to the line marked on it.
Therefore, 1f there were 50 fry in one milk can,and it takes
25 cans to fill the larger container to the mark, there are
50 x 25 or 1,250 fry.
Fingerlings are easier to count than fry because they are older and
larger. The same kind of measuring system could be set up. But the
containers would have to be able to deal with the larger fish. A
farmer who has raised his fingerlings from fry should count the finger-
lings.as he sells them or moves them from a nursery pond to a rearing
pond. Then he will know how many survived. If a farmer started
with 20,000 fry and had 15,000 fingerlings, 5,000 fry died. Butthis
is a death rate of only 25S—which is not a terribly high figure.
Again, the farmer must accept that some of his fish are going to die.
A pond owner who raises fish is more likely to be able to handle fry
successfully. Fry are very delicate and must be protected carefully
from predators and sudden temperature and oxygen changes. The fry
hatch from their eggs 1n 12 to 72 hours depending upon the temperature
and the type of fish. The fry then live off the yolk sac which is
attached to them. This sac lasts several days. But then the farmer
must be sure that the water provides enough food for the fry.
Many pond owners feed the fry with the yolk of a hard-boiled chicken
egg that has been strained through a cloth with water. After a few
days of this, the fry can begin to eat the phytoplankton and the
zooplankton 1n the pond. Make sure that there is always enough food
for the fry to eat before you transfer the fry to the rearing pond.
126

For a fanner who has only one new pond, 1t 1s probably a better Idea
for him to start with young flngerllngs. This will give more chance
of success than starting with fry.
This 1s not to say that a farmer who has only one pond cannot start
his fish crop from eggs or fry. He can. One way this can be done 1s
to keep the eggs 1n a washtub or large container rather than a pond.
The eggs must have plenty of oxygen, so the water must be changed often.
Any unfertilized eggs must be removed so that they do not cause In-
fections 1n the fertilized eggs. Unfertilized eggs are white; ferti-
lized eggs are yellowish red.
Keeping fry 1n a smaller container 1s a good Idea because 1t allows
the farmer to better control the surroundings. Fry often get
bacterial and fungal Infections and are a favorite target of birds.
Again, the water must be kept rich 1n oxygen and food which can be
eaten by fry.
The care of eggs and fry 1s very difficult and very important. A
farmer who wishes to breed fish must certainly work to gain experience
handling delicate eggs and fry. A fanner who wants only a food source
1n his backyard may wish to take the easier road and start with
fingerllngs.
The size of flngerllngs depends upon climate, water tenperature, food
given, and the number of fish stocked 1n the pond. The following are
some average sizes and weights common 1n the Philippines:
Average Average
Lengths Weights
MUkflsh 6.57cm 2.9 grams
T11ap1a 6.33cm 5.8 grams
5.64cm 5.6 grams
Silver Carp 7.39cm 7.1 grams
Common Carp 7.39cm 7.1 grams

Flngerllngs may be fed supplementary food 1f 1t 1s necessary. Remem-

ber that fish usually receive supplementary food which Is about 5J>
of their body weight per day. This was discussed 1n more detail 1n
the section on preparing the pond, so there 1s no need to go Into
detail here.
It probably 1s a good Idea, however, to note again that fanners should
proceed slowly when giving supplementary foods. Add only small amounts
of food and watch the fish carefully to see how they accept 1t. And
the most Important thing 1s to make sure the pond 1s producing enough
of its own food.
 127

I f the guidelines for management, discussed earlier in this section,

are followed, the fingerlings should grow well. When the fish reach
a good size (the size preferred in the farmer's area '-- some people
like smaller, rather than larger f i s h ) , they can be harvested and
sold.

A well-cared-for fence protects

this farmer's pond from unwelcome
visitors.

, I//IA ' " . , 1 ,

mi if-ill—'•</'/ .a p
\{lt"--

•ll/fii
 128

Breeding is the term used to describe the complete reproductive cycle of

fish. Successful breeding depends on the health of the brood stock and
the ability of the fish to spawn. Spawning describes the actual release
of eggs and sperm by the adult fish, and the fertilization of the eggs
by the sperm. This section gives information concerning the breeding of
pond fish.

Management of Brood Stock

A brood fish is a fish that has reached i t s f u l l growth and is .able to re-
produce. The Sp,e at which this happens depends upon the kind of f i s h , the
climate, the quality and amount of food. The specific characteristics of
brood fish are basically the same for every fish species. In general,
good brood fish are:
. well-formed and unbruised

. free of parasites and disease

. l i v e l y and active
. a few years o l d , between 0.5kg and 3.0kg (depending upon species)
. sexually mature (so they can be separated by sex)

Other characteristics used in choosing good brood stock are relative size
and the large, rounded abdomen in the female f i s h .
Choosing brood stock of common carp is more d i f f i c u l t . The characteristics
of these fish are:

. moderately soft body

 129

. broad and flat lower side of belly, so that the fish

can stand on its belly
. relatively great body depth compared to length

. broad, but supple, caudal peduncle

. small head and pointed nose
. rather large and regularly inserted scales
. genital opening nearer to the caudal peduncle than in the
average carp
In general, the larger the female carp, the more eggs it will produce.
A carp of 45-50cm can produce up to 310,000 eggs; a carp of 60-65cm pro-
duces up to 1,507,000 eggs at one time. But older carp (5 years and up)
will have eggs that are not as healthy as those of younger carp (2 years
old), so size is not the only factor in choosing good breeders. Good
breeders usually are younger fish weighing 1 to 2kg.

Brood fish can be obtained from natural waters by seining (nettinn) or

traps, from fish dealers or fishermen, from other pond owners, or from
government fish farms. Select more males than females, so that when a
female is ready to spawn, at least one male also will be ready.
The numbers of breeders needed depends upon the size of the brood pond.
For example, a carp weighing 1kg needs about 5m^ to live and spawn.
Therefore, a brood pond Of 0.5ha (5,000m2-), will hold 1,000 brood fish
of an average 1kg weight. Most brood ponds are much smaller than this,
however, so the farmer must calculate the number of fish to place inside.
After some experience, the farmer will be able to judge the correct
numbers for his pond guite easily.

After choosing the breeders, treat them for possible parasites for di-
sease before placing them into the brood ponds. This treatment is done
by placing the fish, one by one, into a bath of lOppm of potassium
permanganate for 1 hour, then transferring them to a bath of 15ppm of
formalin for another 4 to 12 hours. These mixtures can be prepared in
washtubs. After the fish are treated, they can be placed into the pond.
Of course, brood fish coming from a source which is known to be uncon-
taminated and free from disease'would not require this treatment.
(Further information on treating fish for disease is found in "Problems
of Fish in Ponds.")

The brood stock must be well cared for. If they in good health, the
eggs will be healthier. It is probably more important to feed brood
stock with supplementary foods than it is to give supplemental food
 130

to fish at any other stage of growth. Feed then rice bran, soy bean
cakes, or other processed foods at a rate of 5% of body weight per
day. They should be managed carefully according to the general guide-
lines discussed earlier. Remember: brood stock should not be fed for
it least one day before they are caught for breeding.

When caught by net, examine the brood stock carefully and handle them as
little as possible. Use a cradle to handle and carry the fish from one
pond to another. They should be carried to a spawning pond, stocked in
the proper manner, and left to spawn. After spawning has occurred, the
brood fish should be caught again and carefully carried back and released
Into their brood pond.

Always remember to treat brood stock well, and never select a fish for
spawning which does not show the proper signs of readiness to spawn.
(See the following Information on spawning behavior.)

Spawning 1n fish ponds 1s done 1n two ways:

. Natural spawning -- the fish are placed 1n ponds and left
to spawn by themselves

. Induced spawning (artificial propagation) -- methods used

by man to make (Induce) the fish release
their eggs and sperm
Both of these spawning methods have advantages and disadvantages.
Natural Spawning. Fish who spawn naturally require only a well-prepared
brood pond. Die a net to seine the pond and choose good breeders. Then
Introduce them Into the spawning pond. Most fish will spawn the first
night in the new pond; if they do not spawn, then leave them alone for
a few more days. If they still do not spawn, remove them and start
again with some other breeders.

Each fish used in pond culture has very definite and very different needs
to spawn naturally 1n ponds. To encourage spawning, ponds can be pre-
pared differently depending upon the fish. Therefore, the best way to
prepare 1s to understand how that fish would spawn in nature. The
following describes the natural spawning behavior -- 1n nature and 1n
ponds -- of some of the more common pond fish.
THE COMMON CARP — Spawning 1n Nature

In China, common carp spawn 1n the rainy season when the water level and
temperature rise at the same time. This rise 1n temperature and water
level 1s a signal to the carp to begin maturing sexually. When they are
fully mature (ripe), they begin their mating behavior, which includes
chasing each other in and out of the plants floating on the water surface.
 131

The farmer who sees his common carp doing this has a good Indicator that
his fish are ready to spawn.

When common carp are ready to spawn, the female carp begins to swim 1n
and out of the plants. She then releases her eggs on the plant roots.
The male follows her very closely. As she releases her eggs, he releases
his sperm (milt); the sperm fertilizes the eggs. Carp eggs are slightly
sticky adhesive) and they stick onto the plant roots just under the
water surface until they hatch. Depending on the temperature of the
water, the eggs hatch 1n 2 to 6 days.

CARP EGGS STICKING TO

A WATER PLAWT

The new common carp fry feed off of their yolk sacs for another 2 to 6
days, until 1t 1s absorbed, and then begin to feed on the zooplankton
1n the pond water. The carp can spawn all year round 1n nature, as long
as the water temperatures stay high, because a carp 1s capable of
breeding once every two or three months.

common cjuvp
 132

THE COMMON CARP - Spawning In Ponds

The best way to spawn common carp 1n fish ponds 1s to try and reproduce
the natural conditions of high water levels and temperature. First the
fish are taken from a cool pond and put Into a pond with warmer water.
Then the water level 1n the pond 1s Increased. This provides the
signal for the carp to mature sexually. When the fish mature, place
egg collectors, called kakabans, 1n the pond, or just some water plants
with roots that hang down.

After the Introduction of the kakabans, the female fish begin to Investi-
gate the fibers. Soon the females will begin spawning behavior and the
fish will spawn on the fibers of the kakaban. Because the eggs are
sticky, they stick to the kakaban, and the entire kakaban can be lifted
and transferred from the breeding pond to the nursery pond.
Important: Common carp are omnivorous; that 1s, they eat anything —
including their own fry. It 1s best to transfer the full kakabans to
another pond for hatching.

A kakaban 1s a floating mat that uses a fiber like Inkjuk, or beaten paJm
bark or leaves that have been shredded Into long fibers. These fibers
are bunched together and tied 1n the middle. The bundles are then nailed
down between two long pieces of wood or bamboo and floated just under the
water surface, with the ends hanging down Into the water. This will
look like the roots of water plants to the fish.

A kakaban 1s better to use for carp breeding than plants because 1t can be
boiled and sterilized each time 1t 1s used. This will prevent any fungus
or bacteria from attaching the newly-laid eggs.
 133

TILAPIA — Spawning 1n Nature

T1lap1a spawn every month or so, as long as the water 1s warm. The male
begins the reproductive behavior by digging holes In the pond bottom
or side wall about 35cm across and 6cm deep.

A (Outlined pond showing titapla ntiti.

The female will deposit her eggs, about 75 to 200 of them, 1n the nest,
and then the male releases his milt. The female picks up the eggs and
the milt 1n her mouth, so the fertilization of the eggs actually takes
place in the females' mouth, Tllapla often are called "mouth breeders."

The eggs remain 1n the female's mouth until they hatch -- 3 to 5 days.
Then the fry stay 1n the female's mouth until the yolk sac 1s gone.
During this time, the female does not eat.
As the fry grow, they continue to hide 1n the mother's mouth when they
are threatened. The main reason for this mouth-breeding 1s for protec-
tion of the young fish, since the tllapia have relatively few eggs
compared to some other pond fish. Tllapia 1s also a favorite food for
a number of predators. Because the fry are so well taken care of by the
mother (and even sometimes by the father fish), these young fish are
easier to raise than some other species of fry.
134

TILAPIA — Spawning In Ponds

Tilapla spawn well In ponds. It takes no special equipment or ponds.
A tilapla needs only a pon with a loose bottom to spawn. The spawning
ponds can be stocked with 25 - 30 females per 100m2 (l/100ha) and about
40 - 45 males. If the temperature 1s warm enough, the males will begin
digging holes 1n the pond bottom Immediately, and the female will be
attraced to the hole and release her eggs. From that point, spawning
continues as 1n nature.

Tilapla will also spawn 1n ponds that do not have loose bottoms. In
these ponds, place large-mouth pottery jars or wooden boxes on their
sides on the pond bottom; the tilapla will use these containers as nests.
Young tilapla mature at about 3 months, when they are only 6 to 10cm
long. They can then breed every 3 to 6 weeks, as long as the water 1s
warm. In areas near the equator where the water is always warm, tilapla
can breed almost continuously.
When a fish begins to breed, his energy goes Into the development of his
reproductive organs, not into bodily growth. The main problem with
breeding tilapla 1n fish ponds, therefore, 1s the rapid reproduction of
this fish. Reproduction can be controlled by sorting the tilapla by sex
and placing them into separate ponds, or by producing a monosex culture
by hybrid crossing. However, these methods can usually be done only by
large commerical or government hatcheries where conditions are controlled.
The problem of fast breeding In tilapia ponds can also be controlled by
using some natural predators of tilapla 1n the pond. The predators most
often used are catfishes of the genus CIOJOJU, and, sometimes, eels like
kwvJJJba. jcuponlca, and some other carnivorous fishes like SeAAanochtomib
nebuitui, 1n a polyculture with tilapla that are reproducing. These
predators will eat the young fry, allowing the adult fish to continue
their growth by having no competition for the available food.
 135

CHINESE CARP — Spawning 1n Nature

Chinese carp spawn 1n the large rivers of China when the spring rains
cause the water levels of the river to rise. The eggs are found
drifting down the rivers with the current, and they are collected by
fry dealers as they drift. The main requirements for hatching Chinese
carp eggs are a swift current and plenty of oxygen. Not much 1s
known about their breeding habits 1n nature, but they are likely to
show normal chasing behavior and then spawn, like common carp. Most
Chinese carp are cultured by collecting their fry and eggs from the
rivers 1n the spawning season.

giabi caAp

CHINESE CARP — Spawning In Ponds

The Chinese carp are all annual breeders. Good brood stock 1s chosen
1n the same way as breeders of common carp. Chinese carp breeders
usually are kept 1n small ponds, separated by sex. When they are
sexually mature, 1t 1s quite easy to tell them apart, since the males
will usually leak milt when handled, and develop other body changes such
as serrations (rough edges) on their fins.

iilv&l COAp

Chinese carp brood stock must be well cared for, like all brood stock.
They must be allowed to live undisturbed until time for spawning. How-
ever, the Chinese carp must be Induced to spawn (see Induced Spawning).

blghnad caAp
 136

INDIAN CARP — Spawning in Nature

The Indian major carp will not spawn 1n standing water, so special ponas
are built 1n India to provide a flow of water for these fish. These
ponds are built like barrage ponds 1n upland areas so that the water
flows through them. But these ponds are Impossible to build 1n many
locations, so the Indian carp often are bred by Induced spawning.
In nature, the Indian carp spawn 1n rivers like the Chinese carp. The
eggs are then collected and transferred to hatching ponds.

INDIAN CARP — Spawning in Ponds

Good Indian carp breeders are sexually mature when milt comes from the
male as 1t 1s pressed on the stomach. R1pe females have soft, rounded
bulging abdomens and reddish genital openings. The breeders should
be kept separated by sex In ponds prior to the breeding season, so that
they will readily spawn when Introduced Into the breeding hapas.
Usually one female 1s placed Into a hapa with two males to Insure that
fertilization occurs. If a farmer can place the breeding hapa Into
a source of lowing water, he may be able to breed these fish naturally.
If not, Indian carp must be bred with Induced spawning methods.

A hapa Is a rectangular box about lm 1n depth and 1.6 - 6.5m^ 1n sur-

face area. It can be made from mosquito netting with a mesh size of
3mm. Hapas can be made 1n many sizes. Some other dimensions of hapas
used In Indian carp culture are:
91cm x 91cm x 183cm
91cm x 122cm x 244cm
91cm x 152cm x 305cm
91cm x 183cm x 366cm
 137

The hapa 1s held In place Inside the pond with stakes of bamboo or other
wood. The breeders are put inside the hapa. Kakabans are placed below
the water surface, and the top of the hapa 1s closed so that the
breeders do not escape while mating. After spawning, the kakabans can
be removed and taken to the nursery pond and the breeders released Into
the pond. Hapas can be used to spawn other fish as well.
THE GOURAMI — Spawning In Nature and Ponds
The gouraml build nests out of plant materials to lay their eggs. The
eggs hatch 1n about 30 hours. The fry float belly-up for 5 days until
feeding begins. The gouraml can spawn all year round In warm water
conditions.

This 1s a very good pond fish, and very easy to breed as long as you
have a well-fed brood stock. The natural food of the gouraml 1s soft
leaves of plants H k e Cplocasla and CaHca. They can also be fed rice
bran before breeding. Usually 10 females and 5 males are stocked 1n
ponds as small as 100m? and the eggs float until they hatch.
Breeding in ponds 1s done by Merely placing the breeders together 1n a
pond where there are some marginal plants available for nest building.
Once the fry hatch and begin to feed, they can be stocked 1n nursery
ponds.
 138

OTHER GOURAHIS — Spawning 1n Nature and Ponds

The snakeskln gouraml and the three spot gourami build nests made of air
bubbles so that their eggs float. The kissing gouraml scatters Its eggs,
which are free-floating.

To breed the snakeskln and three spot gouraml, place the ripe fish into
a well-oxygenated pond that has a good growth of aquatic vegetation,
particularly Hydrllla vertlcillata. These fish will continue to spawn
as long as the water temperature stays at 26 - 28°C. Hatching takes
place about 2 days after spawning, and the fry absorb the yolk sac
within 3 to 7 days.
The kissing gouraml spawn at 6-month Intervals and spawn within 18 hours
of stocking 1n the pond. Some of the eggs may be eaten by the parent
fish, so there must always be abundant vegetation 1n the spawning pond
to prevent this. The eggs hatch In 2 days and float on the surface for
3 to 4 days. The new fry eat the decaying plants and plankton 1n the
pond.
CLARIAS CATFISH — Spawning 1n Nature and Ponds
Clarias macrocephalus spawns during the rainy season 1n nests on the
bottom of natural waterways, while Clarlas batrachus spawns In horizon-
tal holes 1n the banks. Hatching takes place after 20 hours at 25 - 32°C.
The fry are then collected by hand net from the nests. There are
2,000 to 15,000 fry 1n each nest.
CIarias catfish will spawn naturally 1n ponds, but induced spawning
methods may be used 1f necessary.
 139

THE TAWES — Spawning 1n Nature and Ponds

The tawes spawn 1n the rainy season. Tawes ponds usually are about
200 to 500mz and about 50cm deep. The ponds should be dried for 5
days before they are filled, and the spawners should be introduced when
the pond 1s half full. Tawes need well-oxygenated water that has a strong
current to spawn. Mating occurs at night; then the current should be
turned off and the eggs spread out evenly on the pond bottom. The eggs
hatch 1n two to three days. After 20 days, the fry can withstand the
current, and 1t should be turned on again. Tawes females produce
about 20,000 fry each.

HETEROTIS NILOTICUS — Spawning In Nature and Ponds

This species 1s normally light-colored, but during the breeding season
1t changes to dark brown. The spawning of HvtVwtU nttotiaiA in
nature begins at the end of the dry season when water Is very warm.
The fish splash 1n the shallow water among the weeds 1n the ponds to
begin their breeding behavior. Then the male builds a nest of weeds
1n water that 1s 10 - 45cm deep. The nest 1s made 1n a depression
that 1s 15cm deep and 60 - 100cm wide. The nest has a grass wall at
Its outer edge which keeps other fish out of the nest. To get 1n and
out of the nest, HvtviotiA ruloticua jumps over this wall.

The eggs of HvttMtli are about 3mm in diameter, and are laid 1n the
bottom of the nest and then fertilized. One of the parent fish is
always 1n the nest to circulate water over the eggs (to give them
oxygen). The eggs natch in 4 - 5 days. The fry travel in a "school"
and stay with their parent fish for several months after hatching.
The fry are very delicate, and should not be handled for a while.
 140

EELS -- Spawning In Nature and Ponds

The eels used 1n Taiwan [kngiUlla. japonica) spawn 1n the sea, and
the fry (called elvers) swim upstream where they are collected by dealers.
Eels, are stocked In rates of up to 25,000 fry/ha along with other fishes,
4nd must be fed supplementary feeds H k e pellets of trash fish. It Is
not recommended that a beginner work with eels because they must be fed
protein and are not very efficient converters of food.
Eels cannot be bred in ponds.

MILKFISH — Spawning 1n Nature and Ponds

Mllkflsh spawn 1n saltwater during the rainy season. The fry are caught
along the shore line at breeding season (which corresponds to the
rainy season) and then transferred and acclimatized to freshwater ponds.
This 1s done for the most part 1n the Philippines and 1n some other
Southeast Asian countries H k e Indonesia and Taiwan.
Mllkflsh cannot be bred in ponds.

STRIPED MULLET — Spawning 1n Nature and Ponds

The striped mullet 1s a saltwater fish, and spawns 1n the sea. The
fry are collected as they swim upstream.
The mullet can be induced to spawn by hormone Injection, but this is
very difficult and certainly is not recommended for a small fish pond
owner.
 141

Induced Spawning. Induced spawning means making the fish produce eggs
and milt when they will not do so naturally. Induced spawning 1s done
when the pond conditions cannot be made to encourage natural spawning,
or when the fish are not ready to spawn when the farmer wants them to
spawn.
Spawning can be done by three methods:
. hormone injection
. hormone Injection with stripping
. stripping
Each of these methods has advantages and disadvantages.

Hoinone. lnje.ctton. Hormone Injection 1s the most common method of

Induced spawning, and 1t requires certain kinds of equipment:
. hypodermic needle and syringe
. mortar and pestle
. saline solution or distilled water
. centrifuge
. test tubes
. dissecting kit
 142

This technique uses the p i t u i t a r y gland (the hypophysis) of the f i s h .

This gland contains the substances!hormones) that trigger the reproduc-
tive organs of the fish to start developing. When these hormones are
taken from a ripe fish and Injected Into a fish that 1s ripe, but has
been unable to spawn, the Injected f i s h w i l l spawn 1n 6 - 12 hours.

The ripe fish must be k i l l e d to get the p i t u i t a r y gland out. This must
be done very carefully. The gland 1s very small: less than 1mm 1n
diameter 1n the common carp, which has a r e l a t i v e l y large p i t u i t a r y .
The p i t u i t a r y gland 1s a round, yellowish-red organ located In the brain
pan of the f i s h . Here 1s the method commonly used to take the gland
from the f i s h :

. Use a mallet or dull knife.

. Hold the f i s h near the head with one hand.
. Hit the f i s h above the eyes at the point where the skull begins.
This w i l l k i l l the f i s h .
. Hake sure to h i t straight and up a l i t t l e . A solid h i t should
dislodge the s k u l l .
. S111 the skin around the skull just enough so that the skull
can be l i f t e d straight up easily. Do this very carefully.
. L i f t up the skull and expose the brain pan. The pituitary
gland should be right on the top as the skull Is l i f t e d .
I f located 1n this way, the p i t u i t a r y gland 1s relatively easy to
f i n d . However, this must be done carefully. I f the skin 1s cut too
much, or the f i s h 1s handled too much, the contents of the brain w i l l
move and the p i t u i t a r y w i l l be hard to locate. The brain contains a
number of f a t deposits which are yellowish and could easily be confused
with a p i t u i t a r y by someone who was not familiar with that gland.

Most farmers w i l l not be Interested 1n doing hormone Injection spawning.

But you should be familiar with and be able to do i t . Steps for
processing the p i t u i t a r y gland and giving the Injection are given below:

. Select the fish you want to spawn and weigh them.

. Select the fish that w i l l be k i l l e d for their glands and weigh
them. Always match the weights of the donor and recipient
fish. I f a donor 1s 1.5kg and the recipient 1s 3kg, use p1tu1-
tarles from two 1.5kg donors.
. K i l l the f i s h , as outlined above.

. Remove the p i t u i t a r y from the fish matching weights (or use

2 to 3mg of dried pituitary gland for every kilogram of body
weight.)

. Place the pituitary gland into the mortar.

. Grind the pituitary with pestle u n t i l 1t 1s a pulpy mass.
 143

. Wash the pituitary into a test tube with 1 milliliter distilled

water or saline solution.
. Place the test tubes Into the centrifuge.
. Centrifuge the glands for 5 minutes.
. Remove the test tubes from the centrifuge.
. Draw up the liquid portion from the test tube Into the
hypodermic needle, leaving the pu]p of the gland 1n the
bottom of the test tube.

. Inject the fish above the lateral line behind the

dorsal fin, just underneath the scale.
. Place breeders Into the breeding pond.
All of the materials used in hypophysation can be found or made
easily. A simple centrifuge can be constructed very easily from a
hand drill (see next page for instructions). If a centrifuge cannot
be found or made, the fish may be injected with a whole pituary gland.
The gland may be dropped into the syringe, water added, and injected
into the fish as outlined above. The force needed to push the gland
out through the needle will crush the gland as if it were being ground
with the mortar and pestle, and this will allow the hormones to be
released.

After the injection, the female fish will begin to develop her eggs
until they are ready for fertilization by the male. In some fish, it
is necessary to inject the female twice with varying amounts of
pituitary extract (see Chinese carp) and the male, once. After the
injections, the fish are treated in the same way as in natural
spawning.
 144

MAKING A CENTRIFUGE
Tools and Materials:
. 1 hand drill
. 1 20cm piece small wood (or bamboo) dowel rod
. 2 metal cigar tubes (or plastic, or rubber hose with clamps)
. 2 pieces medium wire (long enough to wind around the tubes 6
or 7 times)
. 1 piece heavy wire about 9cm long (old coat hanger will work)
. cotton balls or pieces of soft material
. 2 test tubes or small clean glass bottles
. string, tape, and nylon fishing line

HEAVY WIRE METAL TUBES

1\
20o* WOOD O T T O N BALL
DOWEL
'TEST TUBE

Construction Steps:

. D r i l l hole through one end of dowel rod about 1cm from the
end.

Remove d r i l l b i t from d r i l l .

Insert dowel rod Into d r i l l b i t hole, leaving end with newly

d r i l l e d hole at opposite end on top.
 145

. Insert piece of heavy wire through the hole 1n dowel rod.

. Bend the ends of the *ire Into loops.
. Secure the wire on either side of the dowel rod with tape
to keep the wire from slipping through the dowel rod hole.
. Wind medium wire around each cigar tube leaving about 2.5cm
of wire free at the top of each tube.
. Attach tubes to heavy wire by bending medium wire (left
over from step just completed).
. Place a small cotton ball 1n the bottom of each tube to
cushion the test tubes.

Stripping. Stripping 1s the term given to the method of actually

pushing eggs and sperm out of the fish and mixing them 1n a dish. This
can be dangerous to the fish, mostly because the fish can be hurt by
pressing on the belly. Stripping 1s especially dangerous to a fish which
is not ready to spawn. If the fish i£ ready to spawn, a gentle stroking
motion down the side of the fish towards the genital opening will be
enough to release the eggs or sperm.
146

First the eggs are stripped Into a dry dish. Then the milt 1s stripped
Into the same dish. Mix the eggs and milt gently with a feather. Add
water to the dish so that fertilization can occur. After a few hours,
and a few changes of water 1n the dish (to provide eggs with oxygen),
transfer the fertilized eggs to the kakabans and allow them to hatch
as normal.
There are other variations of stripping that are worse than the one
outlined above. One method Involves killing the female or male, or
both, and removing their reproductive organs and then mixing the eggs
and sperm by hand. Not only 1s 1t necessary to kill both breeders, but
If the eggs and sperm are not ripe (mature) and ready for fertilization,
no fry will hatch.

Si>u.ppi.ng uxcth Injection. Often stripping 1s done after the fish have
been Injected with hormone extract. The fish are Injected, and the
eggs are allowed to develop. Then the fish are stripped Into a dry
dish, etc. Stripping with Injections works fairly well. But of the
three methods of Induced spawning described here, the best 1s just
to Inject the fish and let them spawn by themselves In the pond. The
following paragraphs give directions for Induced spawning of some
Important pond fish.

INDUCED SPAWNING OF CHINESE CARP

The Chinese carp must be Induced to spawn by hormone Injection. The
normal dosages for blghead, black, mud, and silver carp are 2 to 3mg
of dried pituitary or 3 fresh pituitary glands for every kilogram of
female fish. That 1s, 1f the female silver carp weighs 2.5kg, 5mg of
dry pituitary or 6 fresh pituitary glands are needed to ripen her eggs.
Or HCG (human chorionic gonadotropin) can be used at dosages of 700 to
1000 IU (International units) per kilogram. But HCG Is expensive and
certainly not available to everyone. Grass carp need higher dosages
(3 to 4mg dried pituitary oer kilogram of body weight). Inject only
a fraction (1/10 to 1/4) of the total for the first dose; then, follow
1t with the rest of the dose, 6 - 2 4 hours later.
After Injection, put the breeders Into the breeding pond. The tempera-
ture should be about 23 - 29°C to encourage spawning, and the oxygen
content should be at least 4ppm. It 1s best to put 1n two males for
every female. Let the fish spawn on their own; they will spawn within
a day. Remove the breeders after spawning.
Hatching Chinese carp 1s complicated. Chinese carp eggs need a constant
supply of clean, well-oxygenated water flowing from the bottom up
through the eggs to stimulate the hatching. Some types of hatching
bags have been developed for use. One kind of bag hangs from a rack
down Into the nursery pond or a trough, and water 1s bubbled up by
pipes from the Inflow pipe. These bags have an advantage In that once
 147

the fry are hatched, they can easily be transferred without touching
them at all. This Is good, because Chinese carp fry are very sensitive
to handling stress.

After the carp spawn, the eggs are collected by net or by draining
the breedHng pond, and they are placed 1n the hatching bags (or
shallow trays) as soon as they have hardened after ferllzatlon (1 to
2 hours). The eggs hatch 1n 1 - 2 days depending on the temperature,
and then absorb their hoik sacs 1n another 3 - 6 days.
As soon as the fry absorb their yolk sacs, they should be transferred
1n the hatching bags to nursery ponds. The nursery ponds should be 0.5
to 1.0m In depth and the oxygen level should be at least 4ppm for good
fry growth.
The spawning of Chinese carp 1s a very complicated business and 1s usually
done Inside carp hatcheries so that all conditions can be controlled.
In China, the carp hatcheries sell their fry to fish pond owners who
then raise them to marketable size.. For most farmers, common carp 1s
a much easier fish to work with and 1s just as valuable for food as
are Chinese carp.
INDUCED SPAWNING OF CURIAS CATFISH
The CltvuM> mcuzAjotupbaluA fishes are Injected with pituitary extract at
a rate of 13 to 26mg/kg at 25 - 32°C. Spawning occurs within 16 hours.
Larvae (fry) absorb the yolk sac 1n 5 days, and are transferred and reared
in ponds only 18cm deep. The best food for fry is zooplankton, but
after 2 to 3 weeks, trash fish may be added. They can be fed rice bran
as well, and later on a mixture of trash fish, rice bran, and broken
rice. In Thailand this sort of production gives yields of 97,000 kg/ha
per year. CIOJIMH catfish are used 1n fish ponds throughout Southeast
Asia now, and are enjoyed for their good taste.
148

INDUCED SPAWNING OF INDIAN CARP

If you cannot build a fish pond like a barrage pond or spawn the Indian
carp naturally 1n ponds, they can also be Induced to spawn by hormone
Injection but this is very difficult to do. Induced spawning 1s
dependent on the dosage and the stage of maturity of the breeders.
Breeders should be about 2 to 4 years old, and weigh 1.5 to 5,0 kg.
Females are injected twice, once with 2 to 3 mg of pituitary gland per
kg body weight, and then, after 6 hours, with 5 to 8 mg/kg. Males
are Injected once, at the time females get their second dose, with a
dose that 1s equal to the first dose given to the females. After
the second injection, the fish are placed together 1n breeding "hapas"
and spawning takes place within 3 to 6 hours. The breeders are put
Inside the hapa, kakabans are placed below the water surface, and the
top of the hapa is closed so that the breeders do not escape while
mating. After spawning the kakabans can be removed and the breeders
released into the pond. The eggs should be transferred to deep
hatching hapas where they will hatch 1n 15 to 18 hours at 27°C.
However, this Induced breeding does not work as well as Chinese carp
breeding, so most Indian carp fry are still caught and collected
in natural waters.
INDUCED SPAWNING OF COMMON CARP
Sometimes common carp will not spawn in ponds, and they are injected.
The amounts needed for common carp are determined by the fishes' weight.
Usually the common carp 1s Injected only once with pituitary extract
from a fish that has the same weight as the Injected fish. The male
is not injected. After the injection, the fish are placed into the
breeding pond. Usually a good female breeder will weigh 1 to 2 kg.
This one large female 1s placed with 1 or 2 males, so that the
total weight of the males 1s approximately the weight of the female.
If you have a female of 2 kg, you can use two males of 1kg each.
The more males, the greater the chance that fertilization will occur.
If you have a large breeding pond, you can place about 5 or 6 large
female fish and 10-15 males to insure that all the eggs are fertilized.
Carp will only respond to pituitary injections from other carp. However,
many other fish will respond to the pituitary gland of common carp, so
often carp are kept just to serve as donors of this gland in other
induced spawning attempts. Also, carp glands are relatively large
and easy to find, compared to the glands of other fishes, and can be
stored for later use by drying, freezing, or powdering. Carp glands
can be preserved by placing them 1n 100% dry acetone, then cooling
them by placing that jar they are placed in, into an ice bath. Every
12 hours, the acetone should be changed, for a total of four times.
Then the pi.tuitaries are air-dried, and stored 1n an air-tight
container. This is called the alcohol drying method; glands preserved
in this way can still be used after 10 years!
 Harvesting Fish

Harvesting is the collection of fish from a pond for sale at market,

or for cooking and preservation for family use. Harvesting can refer
to collecting all the fish or tg taking out only some of the fish
(this happens often in tllapia ponds having both young and adult fish).

If the pond can be drained, harvest the fish by draining the pond into
the catch basin and collecting the fish with a scoop net. If the pond
cannot be drained, drain out as much water as possible and use a series
of nets to catch the fish.

Types of Nets
There are different kinds of nets which can be used in ponds. Some nets,
such as the one shown here are gill nets. G111 nets often have mesh
sizes from 2-3cm; they are often used to harvest the largest fish in a
pond and leave the smaller fish until they grow larger.
150

Another net used to harvest fish 1s the seine. A seine can collect all
the fish 1n the pond at one time because It has smaller openings (mesh
size) than the gill nets, and 1t 1s usually made of heavier fibers to
hold the fish. (See the end of this section for Instructions on making
a seine.)

Both seines and gill nets have lead sinkers (weights) attached to the
bottom ropes. These weights hold the nets at the bottom of the pond
(so the fish cannot escape underneath the nets as they are pulled).
Seines and gill nets also have floats attached to the top ropes to help
the net form an enclosure: the entire pond is netted with one sweep
of the net.

Netting a Pond
Let out as much water as possible. NEVER LET THE WATER OUT COMPLETELY.
As the fish have less and less water 1n which to live, they become
excited and use up more oxygen when there 1s less available. Plan on
harvesting while the water is draining out so the fish are caught before
they are stressed. Or, drain the pond almost completely, and then let
water slowly trickle through while netting the fish.
 151

•::< if*. 'ML

,/ vA, "^J.

•>—•>-

U S I N G A SEINE Place the net at one end of the pond and slowly draw
the edges down the sides of the pond. Bring the middle of the net
across the pond.

When near the other side, begin

pulling the edges up onto the bank
so that the net forms a u-shape 1n
the pond. Pull up the bottom
rope of the net along the pond
bottom until 1t breaks the water
surface. At this point the net
1s a bag shape and will hold the
fish In (some seines already have
a bag woven into them).
 152

Pick the fish up one by one and transfer them to buckets or tubs of
clear water for later weighing and transport.

O T H E R H A R V E S T I N G M E T H O D S F1sh also can be harvested by other

methods. One method 1s to catch them with a hook and a line, but this
method 1s time-consumtng. In some parts of the world fish are harvested
by dynamiting or poisoning the water. But these methods are dangerous
and should never be done in a pond or any other waterway: dynamite
and poisons can kill people and other animals, In addition to fish.
NEVER HARVEST FISH BY DYNAMITING OR POISONING THE POND. There are
easier and cheaper methods than these.

Marketing Harvested Fish

Once fish are'harvested, they must be marketed. Marketing Includes the
transportation and sale of fish. As the Introduction to the manual
pointed out, one very Important thing to consider before building a
pond 1s the availability of a market. If a market 1s further away,
the farmer must have transportation to 1t over passable roads. If the
market 1s very near, he may want to advertise the date of his harvest
by word-of-mouth so that the people will come directly to the pond to
buy the fish. Also, he may want to make an agreement with a tradesman
at the market so that he 1s sure he has a buyer for his fish when they
are harvested. If there 1s no market, or If the farmer 1s going to use
all the fish himself, then he probably will want to preserve some of the
fish (see fish preservation).
 153

Transporting fresh fish to market must be carefully done, so that the fish
are not damaged. Usually, fish are handled 1n the same way they were
handled when put into the pond. If 1t is not possible to get the fish to
market right away, they must be preserved -- either on 1ce for quick sale
in a nearby market; or salted, dried, smoked, or canned 1f going to a
distant market. These methods are discussed in the next section.

Remember: F1sh spoil very quickly in warm temperatures. Sell or preserve

the fish right after harvesting.

After Harvest
After the pond 1s harvested, it should be prepared for the next stocking
of fish:

. Plow the bottom of the pond

. Clear out predators, sticks, rocks, etc.
. Dry the pond bottom until the soil cracks
. Put Hrne on the pond bottom
. Walt two weeks
. Add water to the pond
. Check the water quality
154

Put new fish into the pond

Begin daily and monthly management of fish and ponds

Breed
Market

Harvest
Begin again
 155

MAKING A SEINE

A seine can be made using materials found in the market. The materials
needed are:

. rope
. cork floats
. lead sinkers (or something heavy to help the net sink)
. netting
. sewing needle for nets
The directions for making the net are as follows:

. Tie a rope that will be used for the top and bottom lines
between two trees. Use nylon rope, if possible, because it
will last longer than cotton or hemp.
. Mark each rope at 15cm intervals. Make sure the rope is
longer than the final net by a few meters.
. Stretch the netting until the meshes close completely; then
count the number of meshes in a 23cm section. Good netting
for a general seine will have 6 to 9 meshes 1n a 23cm stretched
section.

BOTTOM ROPE' WEIGHTS

FLOATS

NYLON STRIN
+ NEEDLE
NETTING-
 156
Use nylon string that 1s very strong. Wind a long section on
a net needle. Then tie the end onto the lead H n e rope (top
rope) at the first marking. Pass the needle through the num-
ber of meshes counted 1n the 23cm section of netting. Tie the
string on the rope at the second marking.

Repeat the process until the last marking on the top rope 1s
reached.

Pound the sinkers, or string them, onto the bottom rope at the
15cm Intervals. Tie the cork floats onto the top rope at the
same Intervals.
String the bottom H n e onto the netting 1n the same way as the
top H n e .

REMEMBER: The net must be washed, repaired, dried In the shade, folded,
and put away 1n a cool, dry place after each use. A net
which is taken care of 1n this way will last much longer.
 157

Preserving Fish

F1sh that are not taken to the market fresh must be preserved 1n some way
after harvesting. All fish have bacteria 1n their Intestines; as soon as
they die, these bacteria begin to multiply, and the process of decay begins.
So the first thing which must be done -- as soon as possible -- Is to re-
move the intestines. After this 1s done, go on to preserve the fish In
the way chosen.

There are a number of ways to preserve fish: salting and smoking are
discussed here 1n some detail.

Salting Fish
Salting 1s a very old method of preserving fish. Salting depends on the
size of the fish, the species, and on the amount and quality of the
salt used. F1sh which have been salted well last a long time without
spoiling.

The most Important factor 1n salting fish 1s the quality of the fish
being salted. Use only fresh fish: fish which have been lying around
for hours are not good for salting. Also, use only clean equipment and
clean fish.
PLEASE READ THE DIRECTIONS THROUGH CAREFULLY BEFORE BEGINNING.

TOOLS AND MATERIALS

. Clean sharp knife
. Salt — about 20kg for each 100kg of fish
. Containers for washing fish (buckets, tubs, drums)
. Flat working surface (table, flat stones)
. Containers for holding waste (parts of the fish not used)
 158

. Waterproof boxes or jars to hold salted fish (glass or wood;

not metal unless the metal 1s stainless steel)
. Boards and weights (to press down the fish)
. Slats or lines for drying the fish
. Small shelter to cover fish while drying

STEPS IN SALTING FISH

There are four major steps: gutting and cleaning; salting; washing and
drying to remove excess salt; and, finally, air drying.
Gut and Clean the Fish.

>> i .
>

^
GiLLS
>ANAL VENT
 159

Gut the fish by cutting along the belly from the gills to
the anal vent.
Remove the guts and the black membrane in the gut cavity.
Cut off the head now, 1f preferred; it is not necessary.
Bleed the fish by removing the gills and all blood vessels
after cutting open the throat.
Cut the fish into the right shape for salting: small fish
may be left whole; larger fish should be split in half from
head to tail, so that all the fish flesh will be exposed to

SPINAL COLUMN

Salt the Fish.

. Sprinkle a layer of salt on the bottom of the container
which will hold the fish.
. Place a layer of fish, flesh side up, on the salt. Do not
let the fish lay on top of each other.
. Cover the fish with a thin layer of salt.
. Continue to place fish, then salt, almost to the top of
the container.
. Place the last fish layer with the skin side up. Sprinkle
with salt; the last layer must be salt.
. Place boards and weights on top of the fish in the con-
tainer to press them down.
. Leave the fish 1n the container for 15 days. Add salt
as necessary, until the fish are "struck through" —
thoroughly full of salt. As the fish lie in the salt, the
salt draws out all the moisture in their flesh. This
moisture forms a solution (brine) with the salt as the
salt dissolves. It is necessary to add more salt
 160

salt 1s diluted 1n the solution. As the moisture 1s removed

from the fish by the salt, the level of fish In the container
falls.
Add more fish, skin side up, and also more layers of salt as
the level of fish falls.

Wash and Dry the Fish.

. Remove the fish from the container when they are fully
salted. The fish are properly salted when they are firm
and have a whitish salt layer on their flesh.
. Wash the fish 1n clear, clean^sea water or brine.
. Place the fish on a flat surface and press them down with
boards and weights to make them as flat as possible before
drying.
A1r Dry the F1sh.
. Dry the fish In the sun and in the air, or use heating and
fans. Usually fish are dried outside 1n an area that is
exposed to sun and wind and 1s very clean.
. Dry the fish under a shelter of leaves or branches for the
first few days, so that they do not dry too quickly.
 161

. Put the fish Into as much sunlight as possible, after the

first few days.
. Lay the fish on triangular slats or hang the fish by their
tails from fish lines strung up between trees.

. Cover the fish If 1t rains. Any moisture at all, at this

stage 1n the salting process, will cause the fish to spoil.
. Dry the fish for about six days.
. Pack and store the fish 1n waterproof containers.
 162

HOW T O USE S A L T E D FISH

Soak salted fish In fresh water overnight. Change the water at least once
during this time. The soaking removes the salt; the longer the fish 1s
soaked, the more salt 1s removed. After the fish has been soaked, 1t can
be used 1n any way that fresh fish 1s used.

Smoking Fish
Smoked fish does not last as long as salted fish, because 1t must be re-
frigerated, frozen, or canned 1f 1t 1s to be stored. Smoked fish are pre-
pared 1n a smoke house which 1s merely a shed or a box over a fire which
1s controlled so that 1t produces smoke Instead of flames. The fish are
merely hung Inside the smokehouse so that they are surrounded by smoke.
It takes about six hours to smoke fish so that they can be eaten or stored.
Smoked fish are prepared like fish for salting. After they are bled, and
gutted, they are split from head to tall. They are then washed 1n freshwater
and placed 1n a saltwater brine made by dissolving 1kg ot salt 1n one liter
of water for one hour. Then the fish are removed from the brine and washed
1n clean, freshwater again. The fish are then drained and hung 1n a cool
breezy place for about an hour.

At this point, the fire can be

built 1n the smokehouse. When
1t 1s smoking properly, place
the fish on hooks and hang
{or tie) the fish 1n the top
of the smokehouse. Make sure
the fish are placed securely
so they will not fall. Watch
the fire carefully to make
sure 1t 1s smoking, and not
burning, the fish.
After the fish are smoked for
six hours, they can be eaten
Immediately, or stored 1n jars
(to be canned), or stored fro-
zen or refrigerated until they
are eaten.
Smoked fish do not last as long as salted fish, so do not smoke all of the
fish, unless 1t will be used soon after harvesting.
 163

Other Preserving Methods

F1sh can also be preserved by simple air drying, or by canning. Air
drying Involves only cleaning and washing the fish and drying them 1n
the sun and wind until they are a clear white color. Canning 1s a much
more complicated process. Canning must be done very carefully: fish
can contain many bacteria which must be killed before canning. If fish
are canned with this bacteria still in them, the fish will spoil. People
who eat canned fish which 1s spoiled can become very sick. A farmer who
wishes to can his fish should arrange with a canning factory to take part
of his harvest and can it for him.' A farmer should not try to can fish
at home unless he has expert help.

Often fish are preserved by freezing. Freezing requires a constant

supply of electricity — which most farmers do not have. If electricity
is available, however, freezing is one of the easiest and safest ways
to preserve fish. In this method, the fish are gutted, cleaned, cut
up (1f desired), placed into containers, and put Into freezers. Frozen
fish can last for a very long time, if they are not thawed (unfrozen).
Once frozen fish are thawed, they must be used immediately, or they will
spoil.

Spoiled Fish
Even spoiled fish can be used -- although it cannot be eaten by human
beings. Spoiled fish can be cut up and boiled, then dried in the sun or
cooked in an oven until it is very flaky. Once this 1s done, grind the
fish into a powder and mix it with powders of plants: this makes a very
nutritious food for fish in ponds. The powder can be used as a powder,
or it can be mixed with something to make 1t stick together so that the
powder can be pressed into pellets for fish.

Spoiled fish, and even the guts of fish that have been used 1n some other
way, are called "trash" fish. The powder 1s called "fish meal." F1sh
meal is used to feed fingerllngs or even brood stock. F1sh meal 1s one
of the best fish foods for pond fish.
y Problems of Fish in Ponds

Fish cultured 1n ponds can have problems: they can be stressed by a

lack of oxygen; they can be eaten by predators; they can be Infested by
parasites. These problems ind some solutions to these problems are
discussed 1n this section.

Diseases
Diseases of pond fish are caused by fungi, bacteria, protozoans, worms,
and crustaceans. Usually diseases can be controlled by proper pond
management, which Includes draining the pond, drying It, and liming it
periodically, and also by preventing wild fish or unfiltered water from
entering the pond. Some diseases are fatal, but manv can be controlled
by treating the pond or the fish with chemicals.
Some diseases attack fish 1n ponds because some other factor is causing
stress: overcrowding, low oxygen levels, or not enough food. All of
these conditions weaken the fish so they can get diseases more easily.
The farmer must watch his fish for signs of stress and disease. Any
change 1n normal behavior may be a sign of disease; for example, gasping
at the surface for air, rubbing the body or head against the sides of
the pond, or ragged fins and sores on the body. Something 1s wrong when
a fish population stops eating suddenly. So the farmer must check the
fish often (see "Management"), especially in very hot weather.

FUNGAI DISEASES These diseases are caused by fungi.

G U I Rot. This 1s a disease caused by the filamentous fungus, Rtanckio-
rnycu iangiUnli. This disease is first noticed by a red spotting on the
giUs. Latei, i.ne gills become greyish-white and stop working. When
the gills stop working, the fish suffocate and die. Gill rot is most
common during the hot part of the year and is sometimes associated with
large amounts of dung and a "bloom" of plankton.
166

Treatment: Remove dead fish from the pond; the remaining fish
will probably recover. Drain the pond and dry the
bottom. Treat the pond with quicklime or copper
sulphate to kill the fungus spores. Fill the pond
again. Add quicklime every few weeks until there
1s no more sign of the disease.

Saproleqnia. This fungus Is often associated with Gill Rot. It attacks

weakened places (e.g., bruises from handling) on fish. Since 1t hits
already weakened fish, Sap/tolzgnia attacks fish already trying to fight
other diseases. SaptolzgnMi Tooks like fuzzy, white cotton wool and 1s
often in tufts on the body of the fish. SapnoleAvun by itself can kill
eggs and fry, but does not kill adult fish. IndTan carp are very sus-
ceptible to this disease, and common carp eggs are attacked frequently.

Treatment: Use the same treatment as outlined for G111 Rot.

BACTERIAL DISEASES These are caused by parasites which are

actually bacteria.

Furunculosls. This is the most important bacterial disease. This di-

sease causes ulcers or abcesses 1n muscle tissue. It then breaks through
the skin, and, eventually, becomes a site for fungus infections, like
SapioZzgnta. This disease attacks in the spring, and 1s most often found
in more temperate species, like trout.

Treatment: Drain the pond and treat 1t with slaked lime.

Disinfect every tool used in the pond (nets,
feeding rings, etc.).
 167

Infectious Dropsy. This 1s caused by the bacterium, Piwdomonab punctata.

The symptoms are a swelling of the fishes' belly with water, ulcers on
the skin, lengthening of the fins, and deformation of the backbone.
Treatment: Prevent diseased fish from entering the pond.
Bury and burn the dead fish.
Columnaris. This is another bacterial disease which causes discolored
patches on the body, loss of scales, and, often, death. This disease
can look like a fungal disease, but it 1s not. If possible, 1t should
be examined under the microscope for positive Identification. It 1s
caused by the bacteria OiondswcozcuA columnarUt, and Cytophaga coiumnaAyU
and is often associated with low oxygen levels.
Treatment: Give fish a feed which has terramycin in it. If
it is very bad, place each infected fish in a diD
(bath) of copper sulfate (2 minutes in a solution
of 1 to 2,000) or a dip of malachite green (10 to
30 seconds In a solution of 1 to 15,000). Treat
the pond with 1 ppm of copper sulfate.

PROTOZOAN DISEASES

THE CVCLE 01
ICH OISEASE INFECTED PISH

ADULT PARASITE

u?g? ^REE-SWIMMING-
'&£& YOUNG- STAGE

ENCYSTED STAGE AT
»POND BOTTOM

Ichthyophthirius m u l t i f i H s . This is the worst protozoan disease. The

"ich" disease is caused by a d i l a t e which forms white spots or pimples
on the skin and fins of the f i s h . Each parasite produces thousands of
spores, which can then infect other f i s h in the pond.
 168

Treatment: Drain the pond, and Hrne 1t. Or treat the fish
with chemicals as follows:

Formalin 200-250ppm dally bath

15ppm In pond
Malachite green l.ZSppm dally bath/30 minutes
0.5ppm 1n pond

Methylene blue 2ppm dally bath

AcHflavin lOppm 3-20 dally baths

Salt 7,000ppm several dally baths

Costla and Trichodlna. These are two other e l l late diseases. They are
caused by microscopic organisms which attack the skin of fish and cause
lesions. T1lap1a, the very resistant f i s h , are attacked by the T>Ucii6diiiq
protozoan.

COST IA

TRICHODINA

These dilates cannot be seen by the naked eye, but the lesions and sores
that they cause can be seen by looking closely at the fish.
Treatment: Add 3ppm of potassium permanganate to pond. Or dip
the fish 1n baths of 5 to 10X sodium chloride (salt)
for 5 to 20 minutes dally for up to one week.

CRUSTACEAN PARASITES
Lernea. The anchor worm is the most common disease of this type (a copepod).
This worm attacks the g i l l s or any other part of the body. I t burrows Into
the f i s h , leaving I t s two eggs cases protruding on the outside of the f i s h .
iumta. causes red sores, and makes the fish thin so that their market
value 1s much lower.
 169

IERNLA
Treatment: Add castor o i l in a t h i n f i l m over the surface of
the pond. Treat f i s h infected with young leAnea
in a formalin bath, or remove each parasite by hand.

ARGULUS

Argulus. A/ujuXaa is the fish louse. I t is a f l a t , pink1sh-red disc

that clings to the skin, f i n s , mouth, or g i l l s . I t sucks blood with
a piercing organ, which also injects poisons. Young fish rray die.

Treatment: Drain and Hme the pond. Or place the fish

in a bath of 3 to 5% s a l t , or 250ppm of forma-
l i n for 1 hour.

WORM PARASITES Most of these are external parasites.

Dactyloqyrus. This parasite attacks the g i l l s of young f i s h . The fish

are exposed to this worm when they are between 2 and 5cm long.

Treatment: Manage the pond well so that fingerlings

grow rapidly past the stage when they are
susceptible to Va.cXytcatp'xa,.

Gyrodactylus. This parasite burrows into the blood vessels of f i s h

through the skin, causing the f i s h to appear reddish with sores, This
worm can cause fish to die from emaciation.
170

Treatment: Treat ponds with 5ppm formalin. Treat fish

individually In a bath of 25ppm formalin.
Bothrlocephalus gowkongensls. This 1s the tapeworm which often attacks
the Chinese carp, especially grass carp. It 1s difficult to treat this
worm; It 1s found In the fishes Intestines.

General Treatments
Farmers often will have trouble finding the proper chemicals for treating
their ponds or deciding which disease the fish have and which treatment
to give. Here are some general treatments: any of these treatments will
help an infected pond.

Baths: Potassium permanganate 4ppm

Salt 3-5*
Copper Sulfate 500ppm for 1-2 minutes
Formalin 250ppm for 1 hour
Malachite green 67ppm for 10-30 seconds
Or the farmer can use unslaked Hme directly 1n the pond.

Some pond owners always treat new brood stock with a one-hour bath 1n
lOppm of potassium permanganate, and then transfer the fish to a bath of
15ppm of formalin for 4 to 12 hours. This ensures that no parasites will
be introduced Into the pond with the brood stock.

Other Problems
Other problems are caused by deficiency or environmental factors.
Deficiency problems appear because the fish are missing some factor they
need to grow and be healthy. The missing factor can be a lack of essential
 171

elements like vitamins or minerals. This lack 1s difficult to detect

until a problem exists. So the only way to prevent this kind of de-
ficiency is to be sure the fish are eating the right kinds of food.
Environmental problems are caused by some change in the pond environ-
ment which places a stress on the fish, such as a rapid change in water
temperature or an Increase 1n pond water acidity. These are not diseases
but problems of fish in ponds which can be controlled by watching the
water and soil quality of the fish pond, and by preventing any rapid
changes from occurring.

Predators
Other problems occur in fish ponds when other animals eat the fish.
Frogs, snakes, and birds eat young fish and must be kept out of ponds.
The worst predators, of course, are carnivorous fishes, like the
CtaMyicu, catflshes. Prevent these fish from entering the ponds by
screening the water inlet.

In any pond, all unwanted (trash) fish and predators must be removed
before stocking the pond, if the pond can be emptied, simply drain the
pond, plow and dry the bottom, etc. If the pond cannot be drained, seine
the pond as completely as possible. However, many fish escape the net by
staying at the edges of the pond. The best way to get rid of the
predators 1s to poison the pond water 1n a pond which cannot be drained.

U S I N G P O I S O N The most common poison for use in fish ponds 1s rotenone.

Rotenone can be purchased -- as a liquid or powder -- or It can be gotten
from the roots of the derrls plant. To make rotenone, collect derris
roots and pound them until a milky-white fluid can be squeezed out. This
fluid contains rotenone. Apply one kilogram of derrls root for every
hectare of pond surface area. If using powdered rotenone, use only 0.05
kg/ha. The powder should be dissolved 1n water and dipped Into the pond
from buckets.

Other poisons used in fish ponds are quicklime, teaseed cake, camelia
seed cake, tobacco waste, and powdered croton seed. These are some
172

application rates:
Quicklime: 160kg/ha
Teaseed Cake: 150kg/ha
Camel 1a Seed Take 50 to 200kg/ha, depending on depth
Powdered Croton Seed
Seed: 50 to 200kg/ha, depending on depth
Tobacco Waste: 150 to 200kg/ha
Most of these natural poisons will degrade (break down) and disappear
from the water In 7 to 12 days. After this period, seine the pond again.
If no live fish are caught, stock the pond.
There are many chemicals which can be used to poison predators 1n fish
ponds. However, many of them stay 1n the ground too long. Others are
dangerous. One of these chemicals which can be used safely 1s saponin,
which 1s a component of Teaseed Cake. Apply a dose of 0.5ppm 1n the
pond.

In most places, there are fishermen and farmers who know of some local
plant which causes fish to die. These are all better sources of poison
than chemicals. Many times, when there 1s a tree that overhangs a pond,
fish will be killed when the tree leaves drop Into the pond. Watch for
plants which do this, and use them 1n ponds Instead of poisons 1n a
chemical form.
DO NOT USE CHEMICALS LIKE ENDRIN, DIELDRIN, AND DDT IN PONDS: THEY CAN
LAST IN THE GROUND FOR YEARS, AND LATER, KILL THE POND FISH. NEVER USE
POISONS WITHOUT FIRST CHECKING WHETHER THEY CAN BE USED IN PONDS. SOME
POISONS KILL OTHER ANIMALS AND HUMAN BEINGS, AS WELL AS FISH.
 SUMMARY: FISH DISEASES & TREATMENTS

TREATMENT
DISEASE PISEASE ORGANISM IN POMPS IN BATHS

G1U Rot BtanchiomyceA ianguiniA quicklime

Copper Sulfate
Saprolegnla Sapxole.gru.a. Quicklime
Copper Sulfate
Furunculosls Slaked Hme 1n
Drained Pond
Infectious Dropsy Pi wdomontu punctata. Burn or Bury Dead F1sh
Columnar1s Chond/iococcui CjolumnaAiA Copper Sulfate Ippm Copper Sulfate 500ppm
Cytophaga cotumnaxit, for 2 minutes
Malachite Green 67ppm
for 10-30 seconds

Ich I ctvthyopktkOUui mmttiditii Formalin 15ppm Formalin 2OO-250ppm

Malachite Green 0.5ppm Malachite Green 1.25ppm
Methylene Blue 2ppm
Salt 7000ppm
Acr1flav1n lOppm
Costlasls and CoiCca and Truchodina Potassium Perman- Salt 5-10$ for 5-10
Tr1chod1n1as1s ganate 3ppm minutes dally
Anchor Worm Lvuiia Castor 011 Formalin
F1sh Louse Atgofui Salt 3-5X
Formalin 250ppm for 1 hour

Nematodes Vactytogymi and Gyiodaatytui Formalin 5ppm Formalin 25ppm

10 Other Methods of Fish Culture

F1sh culture 1n ponds is the primary method of freshwater fish culture.

However, there are other methods of fish culture used in places where
ponds are not possible.

Fish Culture in Dams and Reservoirs

Water contained by dams and reservoirs is sometimes used for fish culture.
These waters can be stocked with fry or flngerlings; the adults are later
harvested with nets. Raising fish in.these waters 1s more difficult
than 1n ponds because these waters cannot be drained,and the predators
cannot be removed. Also, 1t is not possible to feed, fertilize, or
poison the water, so natural nutrients must provide enough fish food.
But if there 1s no other water source available, culture in dams and
reservoirs can work.
 176

In Cages
In many parts of the world, the only water available 1s flowing water
or large bodies of water where 1t 1s not possible to divert thi water
Into a pond. In these waters, 1t 1s possible to grow fish in small
cages. Cage culture can also be practiced 1n areas 11ke swamps where
there 1s water not being used for any other purpose.
Cages can be rectangular boxes, bamboo cylinders, or anything that
can be floated 1n a water current so that the water passes through.

In addition to bamboo, cages can be made out of such materials as wire

screen, nylon mesh,and wood. All cages must be anchored so that they
do not float away.
Cage culture is used 1n some countries 1n very fertile waters (polluted
from sewage) with very good results. F1sh in cages usually get their
food from the water as 1t floats past the stationary cage, but 1n some
cases, the caged fish are fed pellets of food dally.
 177

Fast flowing water 1s best for cage culture. If the water 1s not flowing
very fast, problems such as oxygen lack and competition for food can
occur. These can be big problems 1n cages because there are usually more
fish placed 1n the small area of the cage than would normally be 1n the
same area 1n the pond.
Cage culture 1s still experimental, but In Ideal conditions, good growth
rates have been shown by fish that were grown In cages and given extra food.

In Pens
F1sh can also be cultured 1n pens Inside lakes or offshore areas. Fish
culture in pens has been done in Israel and Scotland for years, and.is
now being done 1n some Asian countries. Pens are constructed of bam-
boo or wooden poles that are forced down into the lake or shore bottom.
Then nets are strung from pole to pole to form an enclosure. The nets
are anchored Into the lake bottom with weights or sinkers, and the fish
are placed inside the pen for culture. Fish grown 1n pens can be
controlled a little better than fish 1n cages because pens are larger
(fish pens can be comparable in size to regular fish ponds) and provide
more area and more food.
178

F1sh pens placed 1n fertile (productive) lakes have very good growth
rates. In a fish pen placed 1n a major lake In the Philippines, silver
carp stocked at 7 grams gained an average of 4 grams a day 1n a 52-day
growing season.
Fish pens have many good points: they require no extra feeding of fish,
no fertilization, and very little maintenance (although a lot of care
1s given to the nets). The fish are stocked and harvested later at the
end of their growing season. F1sh pens can work 1n areas where the
water 1s not very productive, but 1n these areas, the fish must be fed
supplementary foods. Feeding rings are used so the food will stay 1n
the pen and not float out Into the water. F1sh 1n pens are usually
harvested by gill nets; seines also may be used.

There are some disadvantages to pens:

Pens are expensive to build. The netting used must be nylon
or plastic so It does not rot, and poles must be treated
so they do not become waterlogged and rot. In the Philippines,
1t costs about $1,428 (U.S.) to build a one hectare pen, using
nylon netting and bamboo poles. This 1s comparable to the
cost of a one-hectare fish pond, but a pen can be destroyed
by a big storm and a pond will not be destroyed.
 179

. A fish pen only lasts three to five years in the water.

. Fish pens are usually-built 1n the shallow areas of a
lake, where they use space many fish need to feed and
spawn. The pens, therefore, reduce the natural pro-
duction in some lakes.
. Fishermen must go further out Into the water to fish when
pens are in the shallow areas.
F1sh pens can also be built H k e fish cages so that they float. Floating
fish pens are used most for marine fish research studies; they also can
be used 1n lakes. Floating fish pens can be as small as one hectare
1n size, or as large as 10 hectares. They are not destroyed by storms
as easily as pens anchored to the bottom, and they can be moved from
one site to another.
F1sh pens may have an Increasingly Important role 1n future fish culture
activities around the world.

In Rice Paddies
This manual has already mentioned the practice of culturlng fish 1n
fields with rice. Here is further, brief mention of that subject.

The farmer digs deep trenches all along the dikes of the paddy. He then
floods the field and plants the rice. After the rice has grown to
a height of 5cm or so, fish can be placed Into the paddy field.
This culture method can be used only with fish that are resistant to
low oxygen levels and are not herbivores - herbivores might eat the young
rice plants. Clarlas catflshes are good fish to culture 1n rice
paddles because they have accessory breathing organs which help them to
 180

breathe even when the paddy gets dry and the water 1n the trenches gets
very low.
After the rice 1s harvested, the fish are caught 1n hand nets and sold.
This 1s not really a culture of fish, but a culture of rice with some
fish added. It can be an easy way for a farmer who has no extra land on
which to build fish ponds to Increase the total production of his land.
 181

Glossary
acclimatt - to become adjusted to a change from the normal environment
(also acctutiafctze).

acid - a substance that can dissolve In water and 1s sour or b i t t e r

1n taste, and turns litmus paper from blue to red.

adhesive. - a sticky substance; sticking or sticky to something else.

aiAtution - adding oxygen to water by spraying or bubbling air through

the water.

algae. - small or large water plants from five classes of plants.

alhatuuXy - the a b i l i t y to combine with an acid to form a s a l t .
aquacuZtuAe. - the cultivation of animal and vegetable l i f e in water.

a/ica - the length times the width of a piece of land or other surface.
back uxiikUig - forcing water in the opposite direction from Its
normal flow.

banbeli - sensitive organs that hang down on the sides of the mouth
of certain fishes.
bablc - having base forming elements (alkaline on reaction).

bloom - a very good growth of algae 1n a pond that has a strong green
color.

bottom IzidoAA - fish that feed on bottom organisms (organisms that

l i v e 1n mud on the pond bottom).
bt-texUng - the cycle of reproduction in animals.

b>Um - water that is saturated with common s a l t , or the water from

a salt water body (the ocean).

buood pondi - ponds where the fish used forbreeding are keot.
buood itock - the fish used for breeding 1n fish ponds.
cage - an enclosure to hold fish in the water.

captiv-Uy - the state of being held 1n a confined place (fish 1n

ponds are captive).
ca/uUvoiz - an organism that eats animal products.
182

cent)vi{w&e - the machine that uses centrifugal force to separate

materials of different densities.

compete - to f i g h t for something against someone or thing.

contaminant - something that makes something else Impure; a pollutant.

cooperative - an organization of people that are working together for

a common purpose.

dam - the wall of a fish pond.

deMii - rubbish, garbage, anything that 1s not supposed to be 1n a

certain area (pond).
deniity - the numberof fish in a pond.
dike. - the wall of a fish pond.

diveuion channel - a ditch that takes water from a stream or river

to a fish pond.

elevation - the height of land.

exotic, ipeciei - fish cultured 1n ponds that are not native to the area.
iejttUJMj - being very productive.

ieAtiUzci - anything added to water or soil to make 1t more productive.

iingeAJLins - a f i s h that is about as long as a man's finger (6-10cm).
Ai&hcultwie - the breeding and cultivation of f i s h In ponds.

iny - f i s h that have just hatched until they reach flngerling size.
genitali - reproductive organs.

genital opening - the opening on the fishes' body where the eggs or
sperm are released.
gitti - the part of a fish that allows 1t to breathe in the water.
giavity - the tendency of things to f a l l downwards towards the center
of the earth.

hapa - the mesh enclosure 1n ponds where fish can be spawned.

heAbivoie - an organism that eats only plants and plant products.

 183

hypophyiatLon - hormone Injection to Induce breeding of f i s h .

hypopfajAJj, - the p i t u i t a r y gland.

hoimonti - components that are secreted by glands of the body to cause

certain changes 1n the body's funtlons.

impvmzablt - a substance that nothing can leak t h r u .

•Lndixcid Spawning - causing a f i s h to spawn by injecting i t with hormones.

IntAoductd iptciu - f i s h not native to an area that are used 1n f i s h

ponds of the area.

kabnban - an egg coHector.

moxtality late. - the rate of death.

mtwml iood - food that a f i s h eats in nature.

niche. - what an organism does; i t s job in the community.

nu&Uvtf. - an Ingredient of food that 1s h e a l t h f u l .

omnlvo/a. - an organism ( l i k e man) that can eat both plants and animals.

operculum - the g i l l covering.

oxygen - a gas that is necessary for a l l l i f e .

pun - enclosures for f i s h culture on large bodies of water.

pkytoplankton - tiny green or brown plants that are microscopic,

free-floating 1n water, that are used as food by f i s h .

photo*yiUkzi-ii - the process on which green plants produce food for

themselves and release oxygen into the water.

pltuJjtoAJj gland - the gland that releases hormones controlling the

reproductive cycle in animals ( l i k e f i s h ) .

plankton - the tiny plants and animals that grow in ponds that are
eaten by f i s h .

pondi - any enclosure that holds water so that f i s h can be grown

Inside i t .

pKtdatoM - animals that prey on other animals.

pKoductivity - a b i l i t y to grow food in a pond, whether 1t 1s plankton

or f i s h .
184

xqatoduction - producing offspring.

lupJJuvUon - breathing.

iWAoUoru - rough edges, l i k e on a fishes' f i n .

iiopz - the slant of land.

ipauming - the release and f e r t i l i z a t i o n of eggs and sperm.

6tA.u& - any change that 1s not normal 1n the environment that creates
problems.

•OuLih i-uh - f i s h not wanted 1n the pond, or_ f i s h that are too small to
eat or_ spoiled f i s h .

uxutuitight - impermeable.

zooptankton - small animals in ponds that can be seen with the naked eye.
 185

Resources
1. American Public Health Association. 1971. Standard methods
f o r examination of water and wastewater. 13th ed. Am. Pub.
Health A s s o c , Washington, D.C. 874 p.

2. Anderson, Steven E. 1973. A manual o f f i s h farming f o r t r o p i c a l

A f r i c a . U n i v e r s i t y of Minnesota, S t . P a u l , Minn. 46 D.
(xeroxed copy)

3. A v a u l t , James W., J r . , 1965. Preliminary studies w i t h grass carp

f o r aguatic weed c o n t r o l . The Progressive Fish C u l t u r i s t .
27 ( 4 ) : 207-209.
4. A v a u l t , James W . . . J r . , and E.W. S h e l l . 1966. Preliminary
studies w i t h the h y b r i d t i l a p i a T i l a p i a n i l o t i c a X T i l a p i a
mossaintHc». FAO World Symposium on Warm Water Pond Fish
C u l t u r e . Rome, I t a l y .

5. A v a u l t , James W., J r . , R.n. Smitherman, and E. W. S h e l l . 1966.

Evaulation of e i g h t species of f i s h f o r aguatic weed c o n t r o l .
FAO World Symposium on Warm Water Pond Fish C u l t u r e . Rome, I t a l y .

6. Aylward, Francis and Mogens J u l . 1975. Protein and n u t r i t i o n

p o l i c y i n low-income c o u n t r i e s . Charles Knight and Company,
L t d . , London. 150 p.

7. Bardach, John E., John H. Ryther, and W i l l i a m 0. "cLarney. 1972.

Aguaculture. J'hn Wiley S Sons, I n c . , New York. 868 p.

8. Beckert, Heino. 1967. Culture of some common f i s h parasites f o r

experimental s t u d i e s . Zoology-Entomology Dept. S e r i e s , Fisheries
5. A g r i c u l t u r a l Experiment S t a t i o n , Auburn U n i v e r s i t y , Auburn
Alabama. 28 p.

9. Best, Cody D. 1975. personal communication

10. Bharadwaj, R.S., Stephen Crawford, and Lauren C. Watson. 1973

Manual f o r f i s h c u l t u r e i n Ra.iasthan and Madhya Pradesh.
American Peace Corps. New D e l h i , I n d i a . 66 D.

11. Boyd, Claude E. 1971. Phosphorus dynamics i n ounds. Proceedings

25th Ann. Conf. Southeastern Assoc. Game and Fish Commissioners:
418-426.

12. Boyd, Claude E . , E.E. Prather, and Ronald W. Parks. 1975.

Sudden m o r t a l i t y of a massive phytoplankton bloom. Weed
Science. 23 ( 1 ) : 61-67.

13. Clemens, Howard P. and Kermit E. Sneed. 1962. Bioassay and use
of p i t u i t a r y m a t e r i a l s to spawn warm-water f i s h e s . Research
Report 6 1 , Bureau of Sport Fisheries and W i l d l i f e , United States
Department of A g r i c u l t u r e (USDA). 30 p.
186

14. Crane, John S . , §_t a]_. 1966. Togo f i s h p r o j e c t manual. United

States Peace Corps. Oklahoma U n i v e r s i t y , Norman, Olkahoma.
158 p.

15. Delmendo, Medina N. and Robert H. Gedney. 1974. Fish

farming in pens - a new f i s h e r y business i n Laguna de Bay.
Laguna Lake Development A u t h o r i t y , Technical Paper 2 .
Pasig, R i z a l , Philippines.

16. Denyoh, F.M.K. 1966. Pond f i s h c u l t u r e development i n Ghana.

FAO World Symposium on Warm Water Pond Fish C u l t u r e . Rome, I t a l y .

17. D i l l o n , 01 an W., J r . , et^ al_. Warm water f i s h ponds. Farmer's

B u l l e t i n 2250. USDA. Washington, D.C. 14 p.

18. Dyche, L.L. 1914. B u l l e t i n on ponds, pond f i s h , and pond f i s h

c u l t u r e . Part I I I . State Dept. o f Fish and Game, Kansas.
Kansas State P r i n t i n g o f f i c e , Topeka, Kansas. 130 p.

19. Eipper, A.W. and H.A. Gegier. 1965. Fish management in New
York farm ponds. Cornell Extension B u l l . 1089. New York
State College of A g r i c u l t u r e , I t h a c a , New York. 39 p.

20. F i d l e r , Gary. 1973. Knowledge about your f i s h pond. Bureau

o f Fisheries and the United States Peace Corps, Manila,
Philippines. 28 p.

21. F i j a n , N i k o l a . 1966. Problems i n carp f i s h pond f e r t i l i z a t i o n .

FAO World Symposium on Warm Water Pond Fish C u l t u r e . Rome, I t a l y .

22. F r a n c i s , F r a n c i s . 1865. Fish c u l t u r e : a p r a c t i c a l guide t o the

modern system of breeding and r e a r i n g f i s h . Routledge, Warne,
and Routledge. London. 320 p.

23. F r i d t h j o f , John. 1962. Encouraging the use o f p r o t e i n - r i c h foods.

FAO, Rome, I t a l y . 103 p.

24. Gaines, John L . , J r . , and Wilmer A. Rogers. 1975. Some s k i n

lesions of f i s h e s . The Pathology of Fishes. U n i v e r s i t y of
Wisconsin Press. Madison, Wisconsin: 429-441.

25. G r a c i a , Demetrio M. and Pio D. Bersamin. What you should know

about carp c u l t u r e . P h i l i p p i n e Fisheries Commission, Intramuros,
M a n i l a , P h i l i p p i n e s . 7 p.

26. Gray, D. Leroy. 1970. The biology of channel c a t f i s h p r o d u c t i o n .

A g r i c u l t u r a l Extension S e r v i c e , C i r c u l a r 535. U n i v e r s i t y of
Arkansas. 16 p.
27. G r i z z e l l , Roy A . , J r . , Olan W. D i l l o n , J r . , and Edward G.
S u l l i v a n . 1969. C a t f i s h farming - a new farm crop. Farmer's
B u l l e t i n 2244. USDA. 22 p.

28. Hara, S h i r o . 1972. Experiment on induced spawninq o f c a t f i s h

( h i t o ) s t r i p p i n g method and observations on the feeding of
f r y . P.F.C. Freshwater Fisheries I n v e s t i g a t i o n U n i t , Los
Banos, Laguna, P h i l i p p i n e s . 11 p.

29. H i c k l i n g , C.F. 1961. T r o p i c a l inland f i s h e r i e s . Longmans, L t d .

London. 287 p.

30. H i c k l i n g , C.F. 1968. The farming of f i s h . Pergamon Press, L t d .

London. 88 p.

31. H i c k l i n g , C.F. 1971. Fish c u l t u r e . 2nd. ed. Faber and Faber,

London. 317 p.

32. Hora, S.L. and T.V.R. P i l l a y . 1962. Handbook on Fish c u l t u r e in

the I n d o - P a c i f i c r e g i o n . FAO Fisheries Biology Technical
Report 14. Rome, I t a l y . 204 p. (xeroxed copy)

33. Huet, M a r c e l , in c o l l a b o r a t i o n w i t h J.A.Timmermans. 1970.

Textbook of f i s h c u l t u r e . Fishery News (Books) L t d . , London.
436 p. ( t r a n s l a t e d from French by Henry Kahn)

34. Hutchinson, G. Evelyn. 1957. A t r e a t i s e on limnoloqy. John

Wiley & Sons, I n c . , New York. 1015 p.

35. J e f f r e y , N o r r i s B. 1969. Some aspects of the ecology o f f i s h po

Proceedings 1969 Fish Farming Conf., Texas A g r i c . Extension
S e r v i c e , Dept. W i l d l . Science, College of A g r i c u l t u r e . Texas
A S M U n i v e r s i t y : 40-42.

36. L a g l e r , Karl F . , John E. Bardach, and Robert R. f i l l e r . 1962.

Ichthyology. John Wiley & Sons, I n c . , New York. 545 D.

37. Lawrence, J.M. 1949. Construction of farm f i s h ponds. C i r c u l a r

92. Agric. Exp. S t a t i o n , Auburn, Alabama. 55 p.

38. L i c h t k o p p l e r , Frank. Basic v i l l a g e pond f i s h p r o d u c t i o n . U.S.

Peace Corps, Madhya Pradesh, I n d i a . 11 p.

39. Maar, A . , M.A.E. Mortimer, and I . Van der Lingen. 1966. Fish
c u l t u r e i n c e n t r a l east A f r i c a . FAO, Rome, I t a l y . 158 p.

40. Manual on Fishermen's Cooperatives. FAO Fisheries Studies 13.

FAO, Rome, I t a l y . 124 p.
188

41. McLarney, William 0. (ed.). 1973. The backyard fish farm -

workbook for 1973. Organic Gardening and Farming. Rodale Press
Inc. The New Alchemy I n s t i t u t e , Woods Hole, Mass.

42. McLarney, William 0. and J.R. Hunter. 1975. A new low-cost

method of sealing pond bottoms. The Journal of the New
Alchemists. 3: 85.

43. Meschkat, A. 1966. The status of warm-water fish culture in Africa.

FAO World Symposium on Warm Water Pond Fish Culture. Rome, I t a l y .
44. Meyer, Fred P. Treatment tips - how to determine quantities for
chemical treatments in fish farming. Bureau of Sport Fisheries
and W i l d l i f e . Fish Farming Exper. Sta., Stuttgart, Arkansas.
US Dept. of the Interior. 20 p.

45. Meyer, Fred P., K.E. Sneed, and P.T. Eschmeyer. (eds.). 1973.
Second report to the fish farmers. Resource Pub. 113. Bu. Sport
Fish, and W i l d l . , USDI. 123 p.

46. Odum, Eugene P. 1971. Fundamentals of Ecology. 3rd ed. W.B.

Saunders Co., and Toppari Co., L t d . , Tokyo, Japan. 574 p.

47. Ong, Kee Bian. 1968. Fish culture. Rorneo Literature Bureau.
Asiatic Lithographic Printing Press, Ltd. Hong Kong. 80 p.
48. Patino R., Anibal. Cultlvo experimental de peces en estanques.
Cespedesia I I (5): 75-127. (translated by Wm. 0. McLarney in
the Journal of the New Alchemists. 3:86-90)

49. Prowse, G.A. 1968. Some basic concepts on fish culture. FAO
Indo-Pacific Research Council, 13th Session. Brisbane,
Queensland, Australia.

50. Rawson, G.C. 1966. A short guide to fish preservation. FAO,

Rome, I t a l y . 67 p.

51. Report to the fish farmers. 1970. Resource Pub. 83. Bu. of
Sport Fish, and W i l d l . , USDI. 124 p.

52. Rogers, Wilmer A. and John L. Gaines. 1975. Lesion of protozoan

diseases in f i s h . The Pathology of Fishes. University of
Wisconsin Press, Madison, Wisconsin: 117-141.

53. Samaka Service Center. 1962. The Samaka guide to homesite farminq.
Samaka Service Center, Manila Philippines. 166 p.
54. Shell, E.W. 1966. Monosex culture of male Tilapla nilotica
(Linn.) in ponds stocked at 3 rates. FAO World Symposium on
Warm Water Ponf Fish Culture. Rome, I t a l y .
 189

55. Shook, Marilyn. 1974. Research Status Report: Experimental fish

pen project. Bureau of Fisheries, Manila, Philippines. 7 p.

56. Sidthmunka, A., J. Sanglert, and 0. Pawapootanon. The culture

of catfish (CIarias spp.) in Thailand. Fisheries Oept.,
Bangkok, Thailand.
57. Swingle, H.S. 1957. Relationship of pH of pond waters to their
suitability for fish culture. 9th Pacific Science Congr.,
Bangkok, Thailand.
58. Swingle, H.S. 1960. Comparative evaluation of two tilapias as
pond fishes in Alabama. Transac. Am. Fish. Soc. 89(2): 142-148.
59. Swingle, H.S. 1966. Biological means of increasinq productivity
in ponds. FAO World Symposium on Warm Water Pond Fish Culture.
Rome, Italy.
60. Swingle, H.S. 1966. Fish kills causes by phytoplankton blooms
and their prevention. FAO World Symposium on Warm Water Pond
Fish Culture. Rome, Italy.

61. Swingle, H.S., E.E. Prather, and J.M. Lawrence. 1953. Partial
poisoning of overcrowded fish populations. Circ. 113. Agric.
Exp. Sta., Auburn, Alabama. 15 p.
62. Swingle, H.S., B.C. Gooch, and H.R. Rabanal. 1963. Phosphate
fertilization of ponds. Proceedings 17th Ann. Conf., South-
eastern Assoc. Game and Fish Commissioners, Arkansas: 213-217.
63. Taverner, John. 1600. Certaine experiments concerning fish and
fruite. London. 38 P. (reprinted 1968. Da Capo Press and
Theatrum Orbis Terrarum Ltd., Amsterdam and New York).
64. Torrans, Eugene Leslie. 1973. Fish culture in Cameroon. Peace
Corps Program and Training Journal. ACTION, Washington, D.C.
1(5): 14-47.
65. University of Rhode Island Marine Memorandum 30. 1972. Fisheries
cooperatives: Their formation and operation. Marine Advisory
Service. University of Rhode Island, Narragansett, Rhode
Island. 18 p.
66. World Neighbors in Action. Raising fish in local farm ponds means
protein and profit in Paraguay. World Neighbors International
Headquarters, Oklahoma City, Oklahoma. 5(2-E).

67. Volunteers in Technical Assistance. 1975. Village Technology

Handbook. VITA, Mt. Rainier, Maryland. 387 p.
190

68. Yashouv, A. Interaction between the common carp (Cyprinus

carpio) and the silver carp (Hypophthalmichthys molitrix)
in fish ponds. Fish Culture Research Station, Dor, Israel.
 191

MEASUREMENTS USED IN THIS MANUAL

1 gram (gm) = 1000 milligrams (mg)

1 kilogram (kg) = lOOOgm « 2.2 pounds (lb)
1 mg/1 « 1 part per mill Ion (ppra)
1 liter (1) » 1000 milliliters (ml) = 0.26 US gallons (gals)
1 Inch (1n) » 2.54 centimeters (cm)
1 foot (ft) =» 30.5cm
1 meter (m) = 100cm = 1000 millimeters (mm) = 39.37 inches
1 are = 100 square meters (m 2 )
1 hectare = 10,000m2 = 100 ares = 2.5 acres
° Centigrade (C) = 5/9 x ("F - 32)
0
Fahrenheit (F) - (9/5 x °C) + 32
 192

INDEX

Acclimate - p. 49
Acids - p. 15, 17, 90
A l k a l i n i t y - p. 89 - 90
Anal f i n - p. 34
Anal vent - p. 34
Anchor worm - p. 168 - 169
AngiUZla. japorujia - p. 39, 50
Anus - p. 35
Application rates - p. 97 - 100
AJiguZaA - p. 169
AjUiticMhfi nobitii - p. 39, 43
Aquaculture - p. 1

Bacterial diseases - p. 166

Barbels - p. 35
Sotbus gonUonoiui- p. 39, 47
Barrage ponds - p. 19 - 21
Black carp - p. 40, 44
Bighead carp - p. 2, 29, 39, 43
BJooms - p. 93
BoifoUoctphaZuA gowfeongenl-u - p. 170
Bottom-water overflow - p. 6 2 - 6 3
Breeding - p. 19 (see "Spawning")
Brood stock - p. 128 - 130
Buffering a b i l i t y - p. 90

Cage culture - p. 176 - 177

Calcium - p. 90
COAO&AJMA OUAOXUA - p. 39, 50
Casui&iJMA avuHAJMA - p . 39, 50
Carbohydrates - p. 3 - 4
Carbon dioxide - p. 83 - 87
Carp - p. 2
Chinese - p. 2, 43 - 45, 109, 119, 135, 146 - 147
Common - p. 2, 37, 40 - 42, 108 - 109, 118, 130 - 132, 148
Indian - p. 45 - 46, 109, 119, 136, 148
Carpenter's level - p. 56
Catch basin - p. 39, 45
Catla - p. 39, 45
CoXta catla. - p . 39, 45
Caudal f i n - p. 33
Caudal peduncle - p. 33
Centrifuge - p. 143 - 145

Fish farming - p. 6
Fish meal - p. 163
Food - p. 7, 1 0 0 - 1 0 6
Natural - p. 101
Supplementary - p. 101, 117 - 119
Food quotient - p. 101 - 102
 193

Fry - p. 19, 36, 110 - 113, 123 - 128

Fungal diseases - p. 165
FuAuncu£o&ii - p. 166

Genital opening - p. 34
Genital papilla - p. 35
GUI rakers - p. 34
Gley - p. 77
Goldfish - p. 39, 50
Gouraml - p. 40, 46, 47, 137
Kissing - p. 40, 49, 138
Snakeskln - p. 40, 49, 138
Three-spot - p. 40, 49, 138
Gravity - p. 17
GyJwdactylui - p. 169

Hapa - p. 136 - 137

Hard water - p. 90
Hardness - p. 89 - 90
Harvesting - p. 149 - 156
Hztoitom. te.mU.ndu. - p. 40, 49
HztvwZLi rUlotlcuA - p. 40, 48, 139
Hormone injection - p. 141
Hybrid vigor - p. 38
HydxXUU. VZAZUUICML - p. 49, 84, 138
Hypophysis - p. 142
HypotkcUmid^kyi motLOu.x - p. 40, 43

Id^yophthOUai mu&tc&itU - p. 167 - 168

I n l e t , water - p. 20 - 2 1 , 55, 69 - 70
Inorganic f e r t i l i z e r s - p. 99 - 100
Induced spawning - p. 141 - 148

Kakaban - p. 132
Key - p. 75 - 76
Kissing gouraml - p. 40, 49, 138

Labeo Kokita. - p. 40 -45

Lateral line - p. 34
Lztoea. - p. 1 6 8 - 1 6 9
Levee - p. 54
Level - p. 56
L1me - p. 79 - 80
Limestone - p. 80
Litmus paper - p. 89

Magnesium - p. 90
Management - p. 107 - 148
Dally - p. 115
Monthly - p. 121
Marketing - p. 152 - 153
 194

Milkflsh - p. 39, 49, 50, 140

Monk - p. 65 - 69
Monoculture - p. 26 - 28
Monosex culture - p. 3 0 - 3 1
Mortality rate - p. 125
Mrlgal - p. 39, 46
Mud carp - p. 40, 44
ttaail ctpfaUui - p. 40, 51
Mullet - p. 40, 5 1 , 140
Mylophcuu/ngcdon plczui - p. 40, 44

Nets - p. 149
Nutrients - p. 3, 16 - 17, 92 - 93
Number of ponds - p. 23

Operculum - p. 34
Organic f e r t i l i z e r s - p. 9 5 - 9 6
Optimum temperatures - p. 81
04pfc*onemu4 aanjzmy - p. 40, 46 - 47
Overflow channels - p. 20 - 21
Oxidation - p. 85
Oxygen - p. 14, 19, 83 - 88

Paddy culture - p. 179

Parallel ponds - p. 22 - 23
Pectoral fins - p. 33
Pelvic fins - p. 33
Pen culture = p. 177 - 179
pH - p. 89
Phosphates - p. 9 9 - 1 0 0
Photosynthesis - p. 84
Phytoplankton - p. 84
P i t u i t a r y gland - p. 142
Plankton - p. 25, 36, 83 - 84
Planning - p. 11 - 52
Polyculture - p. 28 - 30, 45, 108
Poison - p. 171
Pond bottom - p. 59
Pond preparation - p. 79
Pond site - p. 58
Predators - p. 19, 121, 171 - 172
Preservation - p. 157
Protein - p. 3 - 5
Protozoan diseases - p. 167
Piladcmonai punctaXa. - p. 167
Ptui£iu4 gonionoiai- p. 47 (also P. javarUcai,)
Quicklime - p. 80

Respiration - p. 83
Rivaldi valve - p. 61 - 62
Rohu - p. 40, 45
Rosary ponds - p. 22
Run-off - p. 13

Salting - p. 157 - 162

SapAjottgnla. - p. 166
Sealing pond - p. 77 - 78
Secchl disc - p. 91
Seines - p. 150 - 151, 155 - 156
SwianocMkamlA Kobu&tuA - p. 166
S11t - p. 74
Slltation tank - p. 74
Silver carp - p. 2, 29, 40, 43
Siphon - p. 61
Site selection - p. 11 - 13
Size of ponds - p. 23 - 25
Slope - p. 17 - 18, 55 - 59, 77
Sluice - p. 20, 64 - 65
Smoking - p. 162
Snakeskin gourami - p. 40, 49, 138
Soft water - p. 15, 74
Soil - p. 15, 74
Spawning - p. 130
Induced - p. 130, 141 - 146
Natural - p. 130 - 140
Spoiled fish - p. 163
Springs - p. 13
Stocking - p. 107, 109 - 114
Density - p. 107
Rates - p. 108
Stripping - p. 145 - 146
Superaturation - p. 99 - 100
Surveying - p. 55

Tawes - p. 39, 47, 48, 139

Temperature - p. 81
Threespot gourami - p. 40, 49, 138
Tilapla - p. 2, 29 - 3 1 , 40 - 43, 109,
Ttlapia. navwchui - p. 40
Tilapia. mtZa.no ptzuAa. - p. 40
liXapia. moAAambiati - p. 2, 40, 42
TiZapla nUottca. - p. 2, 40, 42
Topography - p. 17
Trash fish - p. 163
T/ticAodota p. 168
T/Uckoptvuii pzdoxjitu - p. 40, 49
TxA.chopi.vjUi ixlzhoptzMsA - p. 40, 49
Turbidity - p. 25, 90 - 92
Turn-down pipe - p. 62
196

Walls - p. 19, 5 4 , 74
Water q u a l i t y - p. 14
Water supply - p. 13
Worm parasites - p. 169
Wells - p. 14

Yolk sac - p. 36

Zooplankton - p. 84