A Series of MCQ Type Online Practice Test On MANAGEMENT (22509) (Unit - IV)
A Series of MCQ Type Online Practice Test On MANAGEMENT (22509) (Unit - IV)
A Series of MCQ Type Online Practice Test On MANAGEMENT (22509) (Unit - IV)
Vsd
Tyme
Name of Institute/Organization *
Spm
Date of Exam *
MM DD YYYY
02 / 04 / 2021
Mobile No. *
7588324070
Email ID *
Sv30112002@gmail.com
[1] ………………….. is very important aspect for any industry as an accident 0/1
free environment boosts the morale of the team members working in
any hazardous situations. *
(a) Quality
(b) Humanity
(c) Safety
(d) Reliability
Correct answer
(c) Safety
[2] The word safety also refers to the precautions people take to prevent 0/1
accident, *
Correct answer
[4] SMS should be integrated into everyday processes throughout the 1/1
organization, to protects ……………….. *
Correct answer
(a) People
(b) Processes
Correct answer
(c) Sharing of appropriate data among supervisors, managers and medical staff
Correct answer
[8] General safety norms for an industrial unit, includes following 0/1
preventive measures, except; *
(a) Be sure you know how to perform the job safely without hazards protect
yourself
(b) Ignore all near misses, incidents, injuries and illnesses and avoid reporting to
higher authorities
Correct answer
(b) Ignore all near misses, incidents, injuries and illnesses and avoid reporting to
higher authorities
[9] Good layout regarding to safe workplace and working condition 0/1
includes; *
Correct answer
Correct answer
Correct answer
[12] Following are the general prevention to be taken for electric 1/1
accidents, except; *
(c) Repair Work should be done without switching the power off
(d) Use safety equipments such as insulated tools and rubber gloves whenever
necessary
[13] Good housekeeping minimizes; * 0/1
Correct answer
Correct answer
Correct answer
[16] An SOP is a procedure that is in that category of risk controls that is 0/1
known as an …………………… *
Correct answer
Correct answer
[20] Class-B type Fire Extinguishers are used in explosion related with 0/1
following category; *
(b) Flammable or combustible liquids, flammable gases, grease and similar material
(d) Fires in certain combustible metals, such as Mg, Ti, Zr, Na, & K
Correct answer
(b) Flammable or combustible liquids, flammable gases, grease and similar material
[21] ……………… drill is a method of practicing how a building would be 0/1
evacuated in the event of fire. *
(a) Fire
(b) Mock
(c) Band
Correct answer
(a) Fire
(a) Permit-to-work
(b) Licence
Correct answer
(a) Permit-to-work
[23] ………………………. is a person trained, competent and authorize to issue 1/1
a permit to work after insuring that all the hazards associated with the
work being done in that area and all necessary safety precautions are
being implemented to ensure that the work can be completed safely. *
(a) Issuer
(b) Executor
(d) Contractor
[24] …………………….. can be defined as “any occurrence that interferes with 0/1
the orderly progress of activity”. *
(a) Hazards
(b) Accidents
(c) Risks
Correct answer
(b) Accidents
[25] …………………….. type of accidents are caused due to personnel 0/1
reasons such as age, physical weakness, inexperience and carelessness
or from the plant conditions such as poor ventilation and illumination etc.
*
Correct answer
[26] The below statements describe the factors affecting to the 1/1
accidents in Factory. Read carefully and identify the correct statement
from the same. 1. Study has shown that accidents are found to be
minimum at a temperature of 67.5° F (nearly 20° C). 2. At higher
temperatures, rate of accidents increase and after 24 ° C, rate of
accidents increases considerably. *
(a) 1 only
(b) 2 only
(a) 1 only
(b) 2 only
[28] The below statements describe the factors affecting to the 0/1
accidents in Factory. Read carefully and identify the correct statement
from the same. 1. Illumination also affects the accident liability. Dim
illumination raises frequency of accidents.[55] 2. In day light, accidents
frequency is less as compared to artificial illumination. *
(a) 1 only
(b) 2 only
Correct answer
[29] The below statements describe the factors affecting to the 1/1
accidents in Factory. Read carefully and identify the correct statement
from the same. 1. Experiments have shown that average hourly output
varies with length of the working day. If the length of working hours in a
day is reduced the average hourly output increases. 2. Many experiments
have been conducted by varying the working hours, which shows that
hourly output reaches maximum value at about seven to eight hours a
day or 40 to 48 hours a week. *
(a) 1 only
(b) 2 only
Correct answer
(a) Loose
(c) Informal
Correct answer
(a) Loose
[32] ………………….. means cleanliness in buildings, work areas, rest areas, 0/1
equipment, machinery tools etc. *
(a) Housekeeping
(b) Cleanliness
Correct answer
(a) Housekeeping
[33] Read the below statements carefully and identify the correct 1/1
statement from the same. 1. Workmen’s Compensation Act, 1923 provide
for payment by certain classes of employers to their workmen of
compensation for injury by accidents. 2. This act protects the workers as
far as possible from hardship arising from accidents. *
(a) 1 only
(b) 2 only
Correct answer
(a) Keep the stand on a height till bust level and straight wrist position
Correct answer
[36] Permit to work (PTW) are used in hazardous industries and involve 0/1
procedures to request, review, authorize, document and most
importantly de conflict tasks to be carried out by ………………… *
Correct answer
Correct answer
[39] Probability of the event that might occur X Severity of the event if it 1/1
occurs; *
(a) Accident
(b) Hazard
(c) Risk
Correct answer
[41] Check list for Job Safety Analysis (JSA) consists of; * 0/1
Correct answer
(a) Water
(c) Foam
Correct answer
Correct answer
(c) Attended to
Correct answer
(c) Attended to
(a) Psychology
(b) Sociology
Correct answer
Correct answer
Correct answer
(b) Gloves
(c) Shoes
Correct answer
Forms