Passerite - 225 MSDS
Passerite - 225 MSDS
Passerite - 225 MSDS
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
HMIS:
Physical state: Liquid HEALTH: *3
Color: Green FLAMMABILITY: 0
Odor: Acidic PHYSICAL HAZARD: 0
Personal Protection: See MSDS Section 8
DANGER -- CORROSIVE!: CAUSES EYE, SKIN, DIGESTIVE TRACT, AND RESPIRATORY TRACT
BURNS.
CONTAINS MATERIAL WHICH MAY CAUSE CANCER.
MAY CAUSE ALLERGIC SKIN REACTION.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR
1910.1200).
Skin contact: Rinse with large amounts of running water. GET MEDICAL ATTENTION
IMMEDIATELY! If iced 0.13% benzalkonium chloride (Zephiran) solution or
2.5% calcium gluconate gel are available, the rinsing may be limited to 5
minutes, with the soaks or gel applied as soon as the rinsing is stopped. If
benzalkonium chloride or calcium gluconate gel is not available, rinsing must
continue until medical treatment is provided.
Eye contact: In case of contact with the eyes, rinse immediately with plenty of water for 15
minutes, and seek immediate medical attention.
Ingestion: Seek medical advice. Do not induce vomiting. Give one to two glasses of
water or milk. Never give anything by mouth to a victim who is unconscious or
is having convulsions.
Special firefighting procedures: Wear full protective clothing. Wear self-contained breathing apparatus.
Unusual fire or explosion hazards: If evaporated to dryness, solid residue is an oxidizing agent and may cause
spontaneous ignition of combustible materials.
Hazardous combustion products: Flammable and explosive hydrogen gas may be formed when hydrofluoric
acid reacts with certain metals. Hydrogen fluoride gas may evolve when
chemical is subjected to prolonged high temperature.
Environmental precautions: Wear appropriate protective equipment and clothing during clean-up. Prevent
further leakage or spillage if safe to do so. Do not let product enter drains.
Clean-up methods: Absorb spill with inert material. Shovel material into appropriate container for
disposal. Dispose of according to Federal, State and local governmental
regulations.
For information on product shelf life, please review labels on container or check the Technical Data Sheet.
Engineering controls: Provide local and general exhaust ventilation to effectively remove and
prevent buildup of any vapors or mists generated from the handling of this
product.
Respiratory protection: If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or
vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Eye/face protection: Wear chemical goggles; face shield (if splashing is possible).
Incompatible materials: Reacts with cyanides and sulfides to cause the release of poisonous gases.
This material will react with glass, concrete, certain metals, silica containing
materials, rubber, leather, and many organics. Avoid contact with organic
materials, oils, greases, and any oxidizable materials. This product may react
with strong alkalies.
Recommended method of disposal: Dispose of according to Federal, State and local governmental regulations.
Hazardous waste number: This product, if discarded directly, would be a characteristic RCRA corrosive
waste (D002). This product contains chromium which is a hazardous waste
(D007). This product contains a component or components identified as
hazardous under 40 CFR 261.24. U134: Hydrogen fluoride
TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act
Inventory.
TSCA 12(b) Export Notification: Chromium III chromate (CAS# 24613-89-6).
California Proposition 65: This product contains a chemical known in the State of California to cause cancer.
CEPA DSL/NDSL Status: All components are listed on or are exempt from listing on the Canadian Domestic
Substances List.
WHMIS hazard class: D.2.A, E
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However,
Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel
Corporation has no control. It is the user's responsibility to determine the suitability of Henkel's products or any
production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the
protection of property and persons against any hazards that may be involved in the handling and use of any of Henkel
Corporation's products. In light of the foregoing, Henkel Corporation specifically disclaims all warranties, express or
implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel
Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of any
kind, including lost profits.