Cisco.200-355.v2019-10-22.q70: Leave A Reply

Cisco.200-355.v2019-10-22.
q70
Exam Code: 200-355
Exam Name: Implementing Cisco Wireless Network Fundamentals
Certification Provider: Cisco
Free Question Number: 70
Version: v2019-10-22
# of views: 316
# of Questions views: 3606
https://www.freecram.com/torrent/Cisco.200-355.v2019-10-22.q70.html
NEW QUESTION: 1
Which option is used to form the BSSID in a BSS?
A. client wired MAC address
B. client serial number
C. AP radio MAC address
D. client radio MAC address
E. AP wired MAC address
F. AP serial number
Answer: C (LEAVE A REPLY)
NEW QUESTION: 2
An access point named Cisco AP is configured on a wireless controller. Which command must
you use in the controller to view access point system messages?
A. debug ap eventlog Cisco_AP
B. config logging Cisco_AP
C. show ap eventlog Cisco_AP
D. show logging
NEW QUESTION: 3
A customer is using the access point GUI to upgrade the software on an autonomous access
point to convert it to a lightweight access point. Which two transfer protocols are valid for
conducting this transfer from the WLC? (Choose two.)
A. HTTP
B. SFTP
C. TFTP
D. RCP
E. SCP
F. FTP
Answer: A,C (LEAVE A REPLY)
NEW QUESTION: 4
Which Cisco AnyConnect module provides wireless connectivity?
A. DART
B. posture
C. web security
D. CSSC
E. telemetry
F. NAM
G. VPN
Answer: F (LEAVE A REPLY)
NEW QUESTION: 5
Refer to the exhibit. Drag the MAC addresses on the left that will allow the wireless station Host A
to send a frame through a controller based AP to the wired station Host B and drop them in the
correct order on the right. Not all options are used.
Answer:
Explanation
NEW QUESTION: 6
The results of a Cisco WCS client troubleshooting tool are summarized into a simple visual
representation of a four-part progression of the connection status for a wireless client.
What are the four parts? (Choose four.)
A. 802.11 association
B. client MAC address
C. IP address assignment
D. client radio type
E. successful association
F. SSID
G. authentication method
H. 802.11 authentication
Answer: (SHOW ANSWER)
NEW QUESTION: 7
What is the IEEE name for a group of access points that are connected by using the Ethernet?
A. IBSS
B. ISS
C. ESS
D. BSS
NEW QUESTION: 8
How many RADIUS servers can be configured globally and per WLAN on a Cisco WLC version
7.0?
A. 7 global; reuse of up to 1 maximum per WLAN
B. 17 global; reuse of up to 3 maximum per WLAN
C. 7 global; additional 3 per WLAN
D. 17 global; reuse of up to 1 maximum per WLAN
E. 7 global; additional 1 per WLAN
F. 17 global; additional 1 per WLAN
G. 17 global; additional 3 per WLAN
NEW QUESTION: 9
Which CLI command would you use on the Cisco WLC to display detailed information for a client
associated with a lightweight access point?
A. debug dot11
B. show arp switch
C. show exclusionlist
D. show client detailed
NEW QUESTION: 10
Which two attributes must be configured to match in order for WLCs to operate in the same
mobility group?
(Choose two.)
A. software version
B. virtual IP address
C. mobility domain name
D. service interface address
E. hardware model
Answer: B,C (LEAVE A REPLY)
NEW QUESTION: 11
Which two statements about the requirements to configure inter-controller roaming are true?
(Choose two.)
A. The same mobility domain names are configured across controllers.
B. The same virtual interface is configured across controllers.
C. The same controller software version is configured across controllers.
D. The same AP manager interface is configured across controllers.
E. The same controller hardware version is configured across controllers.
F. The same RF group names are configured across controllers.
Answer: A,B (LEAVE A REPLY)
NEW QUESTION: 12
Answer:
Explanation
NEW QUESTION: 13
What two AP configurations will show RF prediction on maps in WCS? (Choose two.)
A. Autonomous APs with external Cisco antennas
B. Lightweight APs with external 3rd Party antennas
C. Lightweight APs with external Cisco antennas
D. Lightweight APs with internal antennas
E. Autonomous APs with internal antennas
F. Autonomous APs with external 3rd Party antennas
NEW QUESTION: 14
What is the numerical value in dBm that corresponds to a power level of 50 mW?
A. 18
B. 20
C. 17
D. 16
NEW QUESTION: 15
Which action secures the SNMPv2C protocol in a Cisco WLC?
A. configure new communities and disable default communities
B. use digital certificates to authenticate and encrypt transmissions
C. set a username and difficult-to-guess password
D. enable password or transfer encryption
Answer: A (LEAVE A REPLY)
NEW QUESTION: 16
You are testing a new autonomous Cisco Aironet 1260 AP that has booted for the first time on the
existing corporate network, which includes voice, data, and location services.
How do you reach the GUI of the AP?
A. HTTPS to the DHCP address.
B. HTTPS to the 192.168.1.1.
C. HTTP to 192.168.1.1.
D. HTTPS to 10.0.0.1.
E. HTTP to the DHCP address.
F. HTTP to 10.0.0.1.
Answer: E (LEAVE A REPLY)
Valid 200-355 Dumps shared by PrepAwayExam.com for Helping Passing 200-355 Exam!
PrepAwayExam.com now offer the newest 200-355 exam dumps, the PrepAwayExam.com
200-355 exam questions have been updated and answers have been corrected get the
newest PrepAwayExam.com 200-355 dumps with Test Engine here:
https://www.prepawayexam.com/Cisco/braindumps.200-355.ete.file.html (210 Q&As Dumps,
40%OFF Special Discount: freecram)
NEW QUESTION: 17
What is the ETSI-allowed usage of the 2.4-GHz band?
A. 13 channels, 20-dbm maximum EIRP
B. 11 channels, 10-dBm maximum EIRP
C. 14 channels, 20-dBm maximum EIRP
D. 13 channels, 100-dBm maximum EIRP
NEW QUESTION: 18
What technology consists of small, low-power digital radios?
A. WiFi
B. Bluetooth
C. ZigBee
D. LTE
NEW QUESTION: 19
In what WCS menu would an engineer locate the WCS software version?
A. Administration > Settings
B. Help > Online Help
C. Help > About Cisco WCS
D. Administration > License Center
NEW QUESTION: 20
Which device divides a signal between two antennas?
A. splitter
B. attenuator
C. amplifier
D. lightening arrestor
NEW QUESTION: 21
Which Converged Access option on a WLC must you configure to maintain a client database
under a complete mobility domain?
A. mobility agent
B. mobility group
C. mobility oracle
D. mobility controller
Explanation
https://www.ciscoxonVc/en/usMdocs/wireless/controller/8-4/config-guide/b_cg84/configuring_ne
NEW QUESTION: 22
What is the function of the Cisco AnyConnect DART tool?
A. visualizes a WLAN environment, showing the possible locations of problems
B. gathers statistics from neighboring clients for comparison to the baseline
C. creates a compressed bundle of client logs and information
D. helps to troubleshoot a WLAN connection by using easy-to-use wizards and statistic viewers
NEW QUESTION: 23
Answer:
Explanation
NEW QUESTION: 24
Which is recommended minimum SNR for a data cell with a data rate of 54 Mb/s?
A. 25
B. 6
C. 4
D. 10
NEW QUESTION: 25
An engineer is gathering information for a wireless survey of a hospital. What two pieces of
information must be collected for an active survey to access the outcome best suited for the
facility? (Choose two.)
A. existing Network Switch types and model numbers
B. use of wireless for secure records
C. type of devices present on the new wireless network
D. utilization of Location Services or voice applications
E. spectrum analysis to locate all the computer work stations
Answer: C,D (LEAVE A REPLY)
NEW QUESTION: 26
What is the approximate time difference for a client to perform an intracontroller roam compared
to an intercontroller roam?
A. 20 ms
B. 30 ms
C. 10 ms
D. 1 ms
NEW QUESTION: 27
What is Cisco WCS Navigator?
A. a server for storing the location data of wireless clients
B. a GUI for displaying the data of Cisco CleanAir APs, aligned with an uploaded map
C. a server for storing and reviewing Cisco Spectrum Expert station data
D. a single point of management for multiple Cisco WCS servers
E. a single point of management for multiple Cisco WLC systems
Answer: D (LEAVE A REPLY)
NEW QUESTION: 28
An engineer has been asked to upgrade the code on a WLC that is running Cisco AireOS 8.0.
Which two protocols can be used to download the code file to the controller? (Choose two.)
A. SNMPv3
B. SNMPv2c
C. FTP
D. HTTPS
E. SFTP
NEW QUESTION: 29
Which interface is used to connect the foreign and anchor controllers?
A. virtual
B. management
C. dynamic
D. service
Answer: B (LEAVE A REPLY)
NEW QUESTION: 30
Which option is the maximum power setting for an access in any regulatory domain on a Cisco
wireless LAN controller?
A. 5
B. 1
C. 8
D. 10
NEW QUESTION: 31
In the original 802.11 standard, which two throughput rates are supported by DSSS? (Choose
two.)
A. 6 Mbps
B. 11 Mbps
C. 2 Mbps
D. 10 Mbps
E. 1 Mbps
Answer: C,E (LEAVE A REPLY)
NEW QUESTION: 32
An engineer needs an AP with at least two spatial streams, four receivers, and three transmitters.
Which device meets these requirements?
A. 2x3:4
B. 3x4:2
C. 4x3:2
D. 2x4:3
NEW QUESTION: 33
Which four levels of messages will be sent to the logging server? (Choose four.)
A. critcal
B. warnings
C. informational
D. alerts
E. errors
F. debugging
G. notifications
H. emergencies
NEW QUESTION: 34
Refer to the exhibit.
Which administrator role applies when the user logs into the Cisco Wireless LAN Controller?
A. ReadOnly
B. ReadWrite
C. LocalAdmin
D. LobbyAdmin
NEW QUESTION: 35
Refer to the exhibit. During deployment of a WLC on a customer site, the GUI log displayed this
error message. What could be causing this error?
A. An access point has been assigned to an AP group that has reached maximum capacity.
B. An access point has been assigned to an AP group that has been deleted.
C. An access point has been removed from an AP group and assigned to the default AP group.
D. An access point has been removed from an AP group and assigned to a FlexConnect AP
group.
NEW QUESTION: 36
Which wireless client attempts to authenticate by using 802.1X?
A. supplicant
B. EAP
C. authenticator
D. RADIUS
NEW QUESTION: 37
What interference you will see when conducting a site survey? (Choose three)
A. AdHoc Hotspot
B. Bluetooth link
C. Analog Wireless Camera
D. Microwave Ovens
Answer: A,C,D (LEAVE A REPLY)
NEW QUESTION: 38
A wireless bridge is being installed near an airport. An organization informs the city council about
complying with max power levels that could be used and settings on any 5GHz channels used
that might interfere with the airport radar. What organization is this?
A. Institute of Electrical and Electronics Engineers
B. Internet Engineering Task Force
C. Wireless Fidelity Alliance
D. Federal Communications Commission
NEW QUESTION: 39
A customer has asked for its wireless equipment to be managed as securely as possible. Which
three management protocols will provide encrypted access to the equipment? (Choose three.)
A. SNMPv3
B. HTTP
C. Telnet
D. Secure Shell
E. HTTPS
F. SNMPv2c
Answer: A,D,E (LEAVE A REPLY)
NEW QUESTION: 40
A customer wants to implement a policy on a guest WLAN, in which clients must accept the
company wireless policy and enter an email address to access the guest network. The company
does not have access to RADIUS servers and wants the WLAN to use open Layer 2 security.
Which Layer 3 security web policy must be enabled to meet these criteria?
A. web authorization on MAC filter failure
B. authentication
C. conditional web redirect
D. web pass-through
NEW QUESTION: 41
A customer wants to deploy a mesh network with 2 root access points and 10 mesh access
points. The root access points should be configured as which mode on the WLC?
A. sniffer
B. bridge
C. FlexConnect
D. rouge detection
E. mesh
NEW QUESTION: 42
When Cisco AnyConnect modules are installed on a PC, which module must be installed first?
A. web security
B. VPN
C. telemetry
D. CSSC
E. DART
F. posture
G. NAM
NEW QUESTION: 43
A help desk engineer is attempting to perform a remote packet capture on the wireless network.
Which access point mode is necessary to perform this function?
A. monitor
B. SE-Connect
C. FlexConnect
D. rogue detector
E. sniffer
Answer: E (LEAVE A REPLY)
NEW QUESTION: 44
Refer to the exhibit.
Which GUI item do you click to configure maps with APs in Cisco WCS?
A. Administration
B. Monitor
C. Client
D. CleanAir
E. Services
F. Configure
NEW QUESTION: 45
Refer to the exhibit. WLC1 becomes unresponsive due to a power failure at a customer site. How
does the access point that is shown in the WLC controller GUI behave now that WLC1 is
disabled?
A. associates to controller 10.201.204.8
B. associates to controller 10.201.204.6
C. associates to controller 10.201.204.19
D. associates to controller 10.201.204.11
NEW QUESTION: 46
A customer has requested a wireless configuration platform with built-in adult content filtering.
What platform will accomplish this?
A. ISE
B. Cisco Wireless Controller GUI
C. Prime Infrastructure
D. Meraki Cloud Dashboard
NEW QUESTION: 47
A network engineer is connected via wireless to a Cisco AireOS WLC and wants to download the
configuration but is unable to do so. Which change will correct the issue?
A. enable Telnet
B. connect via wired network
C. connect on 5-GHz SSID
D. enable WebAuth SecureWeb
E. enable management via wireless
NEW QUESTION: 48
What three components must be the same on a controller and the RADIUS server when adding a
RADIUS server to a WLC? (Choose three.)
A. Port Number
B. Username
C. Network Mask
D. Shared Secret
E. IP Address
F. Index Priority
NEW QUESTION: 49
Which three options relate to event-driven RRM? (Choose three.)
A. configurable in WLC at 802.11b/g/n > RRM > DCA
B. any 802.11n AP models
C. minimum of AP, WLC, WCS, and MSE
D. specific AP models
E. minimum of AP and WLC
F. configurable in WLC at 802.11b/g/n > RRM > TPC
G. minimum of AP, WLC, and WCS
Answer: A,D,E (LEAVE A REPLY)
NEW QUESTION: 50
You have created a new WLAN. However, no clients can connect and the SSID does not appear
on the available wireless networks Which cause of the issue is true?
A. The WLAN controller needs a restart for the new configuration to take effect
B. The WLAN has the wrong NAS ID
C. The WLAN is disabled
D. The WLAN is mapped to an incorrect interface or interface group
NEW QUESTION: 51
Which three options are limitations when configuring basic security on an autonomous AP when
using the express security page setup? (Choose three.)
A. You need multiple SSIDs.
B. Delete all the SSIDs.
C. Use multiple authentication servers.
D. Edit the SSIDs.
E. Use the same SSID on both radios.
F. Use a single SSID on a single radio.
Answer: C,D,E (LEAVE A REPLY)
NEW QUESTION: 52
A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where
can this command be found within the drop-down menu?
A. Monitor > Maps
B. Configure > Maps
C. Monitor > Network Summary
D. Reports > Maps
NEW QUESTION: 53
Which framework of services is used to gather over the air information for the Neighbor Discovery
Protocol, load, interference, and noise?
A. EIRP
B. SNR
C. BSSID
D. RRM
NEW QUESTION: 54
Which two algorithms are available in RRM? (Choose two.)
A. coverage-hole detection
B. transmitting channel expander
C. dynamic channel assignment
D. RSSI normalizer
E. rogue detection
NEW QUESTION: 55
Following the deployment of a wireless network for data and voice services, an engineer is to
validate the coverage. Which type of survey is required to ensure coverage?
A. active
B. calibrating
C. passive
D. fingerprinting
NEW QUESTION: 56
An engineer is trying to identify if radar has impacted the wireless network at a customer site.
When using the controller GUI, which dashboard in the Monitor section presents this information?
A. Statistics - Mobility Statistics
B. 802.11a/n - Air Quality Reports
C. 802.11b/g/n - Interfering Devices
D. Clean Air - Worst Air Quality Report
NEW QUESTION: 57
End-to-end encryption is a management requirement for a wireless deployment. When importing
the WLCs into Cisco Prime infrastructure 2.0, Which two options represent the version of SNMP
and remote access parameter that fulfill this requirement? (Choose two)
A. HTTPS
B. SSH
C. SNMPv2c
D. SNMPv3
E. SNMPv1
Answer: A,E (LEAVE A REPLY)
NEW QUESTION: 58
An engineer is connecting a Cisco 5508 Wireless Controller that must connect to an out-of-band
management network for management only. Which two options should be used for the port on the
WLC and the cable type?
(Choose two.)
A. console cable
B. console port
C. service port
D. redundancy port
E. distribution system port
F. crossover cable
G. straight through cable
NEW QUESTION: 59
Which two items are used to help convert a lightweight AP into an autonomous AP? (Choose
two.)
A. Windows Cisco Conversion Tool
B. image with naming convention of platform_name-rcvk9w8-tar
C. Cisco WCS template
D. Cisco WLC CLI
E. image with naming convention of platform_name-k9w7-tar.default
F. HTTP express setup on the AP
Answer: D,E (LEAVE A REPLY)
NEW QUESTION: 60
Which statement best describes the ability of a wireless client to access and transmit a data
frame to an AP?
A. The client uses random countdown timers to start the transmission of a data frame.
B. The client listens to the media until polled by the AP using PCF to send its data.
C. The client listens to the media until a data frame is finished, at which time it transmits, unless a
collision of data frames has occurred.
D. The client listens to the media and countdown timers to start the transmission of a data frame.
NEW QUESTION: 61
A customer is using a "guest" VLAN at a remote site to provide access for onsite guests or
visitors to access the Internet, while prohibiting them from accessing internal sites. Which network
technology isolates guest traffic while utilizing the existing corporate network?
A. frame relay
B. DMVPN
C. GRE tunnel
D. vPC
NEW QUESTION: 62
What are three characteristics of WCS? (Choose three.)
A. based on a per server licensing system
B. based on a single server licensing system
C. used for wireless planning
D. used for RF fingerprinting
E. used for real-time tracking of multiple clients
F. used for wireless management
Answer: B,C,F (LEAVE A REPLY)
NEW QUESTION: 63
During an upgrade, the wireless infrastructure has seen a few access points join and then drop off
the network.
After further investigation, it appears the access points may have an IOS code version that is
causing issues.
Where in the controller is this information found?
A. CLI > show ap image all
B. GUI > Monitor > Software Version
C. GUI > Wireless > Access Point > General
D. CLI > show sysinfo
NEW QUESTION: 64
What tool can be used to increase accuracy of WCS heat maps?
A. CleanAir
B. Map Editor
C. Cisco Spectrum Expert
D. Planning Tool
NEW QUESTION: 65
Which calculation computes the EIRP of an antenna?
A. EIRP = Tx power (dBm) + Antenna Gain (dBi) - Cable Loss (dB)
B. EIRP = Cable Loss (dB)+ Antenna Gain (dBi) / Tx power (dBm)
C. EIRP= Cable Loss (dB)+ Antenna Gain (dBi) - Tx power (dBm)
D. EIRP = Tx power (dBm) * Antenna Gain (dBi) / Cable Loss (dB)
E. EIRP = Antenna Gain (dBi) - Cable Loss (dB) * Tx power (dBm)
F. EIRP = Tx power (dBm) + Antenna Gain (dBi) / Cable Loss (dB)
NEW QUESTION: 66
Which Cisco WLC appliance or module can support as many as 1500 access points?
A. Cisco 5760
B. Cisco WiSM2
C. Cisco 5520
D. Cisco 5508
NEW QUESTION: 67
Drag the propagation behavior on the left to the corresponding environment on the right.
Answer:
Explanation
NEW QUESTION: 68
A customer would like to configure 25% of the access points on a floor to exclusively spectrum
analysis functions. What mode will the access points have to be configured in order to achieve
this request?
A. Monitor mode
B. Local Mode
C. H-Reap mode
D. SE-Connect mode
NEW QUESTION: 69
A wireless engineer is designing the wireless networking for a company with offices in two
different locations.
Which two regulatory bodies should they check to find the maximum EIRP allowed? (Choose
two.)
A. ETSI
B. ITU-R
C. IEEE
D. FCC
E. Wi-Fi Alliance
Answer: A,D (LEAVE A REPLY)
NEW QUESTION: 70
Which two states are valid when an AP discovers and joins a controller? (Choose two.)
A. Image date
B. Discovery mode
C. Authentication request
D. connected
E. Discoverable

Cisco.200-355.v2019-10-22.q70: Leave A Reply

Uploaded by

Copyright:

Available Formats

Cisco.200-355.v2019-10-22.q70: Leave A Reply

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cisco.200-355.v2019-10-22.q70: Leave A Reply

Uploaded by

Copyright:

Available Formats

Cisco.200-355.v2019-10-22.

You might also like