CTP048 Automatic Break Failure Indicator and Engine Over Heating Alarm
CTP048 Automatic Break Failure Indicator and Engine Over Heating Alarm
CTP048 Automatic Break Failure Indicator and Engine Over Heating Alarm
ABSTRACT
Automatic break failure indicator and engine over heating alarm is consists of
IR sensor circuit, Heat sensor Circuit, Control Unit and frame. The sensor is used to
detect the break wire. There is any disconnection of the break wire or cutting of any few
turns of break wire, the control signal to the alarm unit. Similarly the heat sensor is fixed
to the engine and this heat is measured and giving the alarm signal when the engine heat
exceeds the setted temperature limit.
INTRODUCTION
This forms an integral part of best quality. This product underwent strenuous test
in our Automobile vehicles and it is good. Man has needed and used energy at an
increasing rate for its sustenance and well being ever since he came on the earth a few
million years ago. Primitive man required energy primarily in the form of food. He
derived this by eating plants or animals, which he hunted.
With further demand for energy, man began to use the wind for sailing ships and
for driving windmills, and the force of failing water to turn water wheels. Till this time, it
would not be wrong to say that the sun was supplying all the energy needs of man either
directly or indirectly and that man was using only renewable sources of energy.
BLOCK DIAGRAM
VEHICLE BREAK WIRE
ENGINE
OVER HEATING
ALARM
ADVANTAGES
Low cost automation project.
Less power consumption
Operating Principle is very easy.
Installation is simplified very much.
Less time and more profit.
APPLICATIONS
Four wheeler application
Two Wheeler Application
DISADVANTAGES
1. This circuit is not working on low rain fall.
2. This system applied in the case of water falling on the class period only.
3. Addition cost is required to install this system to four wheeler.