Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    Service Bulletin: Black Band Through The Image

    Uploaded by

    Phạm Công Thứ
    This service bulletin addresses a black band that may occur on printouts from several Kyocera Mita printer models. The black band is caused by condensation under high temperature and humidity conditions, which allows electrical charge to leak from the edge of the terminal main. The solution is to improve isolation by adding a sheet terminal main between the film and base terminal mains. Technicians should add the new part when encountering the issue.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Service Bulletin: Black Band Through The Image

    Uploaded by

    Phạm Công Thứ
    15 views2 pages
    This service bulletin addresses a black band that may occur on printouts from several Kyocera Mita printer models. The black band is caused by condensation under high temperature and humidity conditions, which allows electrical charge to leak from the edge of the terminal main. The solution is to improve isolation by adding a sheet terminal main between the film and base terminal mains. Technicians should add the new part when encountering the issue.

    Original Description:

    2C9-036

    Original Title

    2C9-036

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service bulletin addresses a black band that may occur on printouts from several Kyocera Mita printer models. The black band is caused by condensation under high temperature and humidity conditions, which allows electrical charge to leak from the edge of the terminal main. The solution is to improve isolation by adding a sheet terminal main between the film and base terminal mains. Technicians should add the new part when encountering the issue.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views2 pages

    Service Bulletin: Black Band Through The Image

    Uploaded by

    Phạm Công Thứ
    This service bulletin addresses a black band that may occur on printouts from several Kyocera Mita printer models. The black band is caused by condensation under high temperature and humidity conditions, which allows electrical charge to leak from the edge of the terminal main. The solution is to improve isolation by adding a sheet terminal main between the film and base terminal mains. Technicians should add the new part when encountering the issue.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Service Bulletin

    SB Number: SB 2C9-036 Creation Date: 18/02/2009

    Subject: Black band through the image


    Model: KM-1620/2020/1635/2035/1650/2050/2550

    Phenomenon A black band may occur on the print-out.

    Cause The film terminal main may condensate under the condition of a environment with a high degree of
    temperature/humidity.
    This may then result in leaking of the electrical charge at the edge section of the terminal main.

    Solution Improve the isolative capability of the terminal main, by adding a film (sheet terminal main
    302FT26050) to the terminal main.

    Phenomenon; A black band appears on the image

    Parts No. Old Parts No. New Parts Description Q’TY Interchange- SP
    No. ability
    Old New Old New
    1 ------------ 302FT26050 SHEET TERMINAL - 1 - O O
    2FT26050 MAIN

    Classification Entire stock rework X In-field modification by case No modification necessary


    In-field modification at next visit
    Field measure When the above mentioned phenomenon occurs, please add sheet terminal main 30FT26050
    under the film terminal main.

    Affected serial Type Serial number


    numbers KM-1620/2020/1635/2035/1650/2050/ November 2008 production
    2550

    KMIS Service Department, Kyocera Mita Europe


    Page  of 2 8632 / SB 2C9-036
    Service Bulletin

    Rear frame

    Film terminal main

    Base terminal main

    Terminal main

    Cause; Under high temperature/humid Sheet terminal main 302FT26050 details


    environment condition, eletrical charge
    may leak from the main charger.
    4mm

    Rear frame
    Glued
    Film terminal main surface 15mm 24mm

    14.5mm

    Solution; Add sheet terminal main at the


    back of the base terminal main

    Terminal main

    Main charger

    Base terminal main

    KMIS Service Department, Kyocera Mita Europe


    Page  of 2 8632 / SB 2C9-036

    You might also like