980H 2006 Engl (d01) PDF
980H 2006 Engl (d01) PDF
980H 2006 Engl (d01) PDF
Wheel Loader
Performance you can feel with the capability to work in the most
demanding applications. Unmatched operator comfort and
efficiency in a world class cab. Revolutionary electronics for
low-effort operation. Increased productivity with lower owning
and operating costs.
2
Operator Comfort Serviceability Owning and Operating Cost
Easy Entry And Exit Exceptional Access To Service Points Proven Fuel Efficiency
Excellent Visibility Monitoring Systems Superior Maintenance
And Dealer Support
Comfortable Environment Electronic Systems Monitor Product
Reduce Unexpected Downtime
With Controlled Vibration Health And Performance
pg. 10
Quiet, Comfortable Cab Complete Dealer Support
Reduced Operator Effort pg. 12
pg. 8
3
Reliability and Durability
The Cat 980H – Built Strong and Tough – Tested And Proven – Ready To Work
Axles
4
A
B
C
Caterpillar Monitoring System. Integrated Braking System (IBS). Spread Hitch. The distance between the
The 980H is equipped with the Cat The Cat exclusive Integrated Braking upper and lower hitch plates is important
Monitoring System (CMS) that keeps System reduces axle oil temperatures for machine performance and component
watch over the health of your loader. and improves transmission neutralizer life. The Cat spread hitch design provides
CMS monitors critical engine system smoothness. IBS has a direct impact excellent load distribution and bearing life.
functions and will derate the engine to on durability of the axles and brakes Both the upper and lower hitch pins
protect itself from damage if needed. especially in applications involving pivot on double tapered roller bearings –
Depending on which of the following long distances and/or heavy braking. improving durability by distributing both
six critical conditions arise, the CMS A Downshift logic only vertical and horizontal loads over a larger
monitor or front panel will display B Brake application initiated surface area. The wide opening also
warning lights and sound audible alarms. C Self-adjusting transmission provides excellent service access.
High coolant temperature neutralization
Front Frame. The non-engine end frame
High air inlet temperature
Structures. The articulated frame provides a solid mounting base for the
Low engine oil pressure
design of the 980H features a durable front axle, lift arms, lift cylinders and tilt
High fuel pressure
box-section engine end frame and cylinders. The fabricated, four-plate loader
Low fuel pressure
rigid four-plate loader tower that is tower absorbs the forces associated with
Engine over-speed
robotically welded. Robotic welding loading, twisting and penetration.
Axles. The 980H axles are designed by creates frame joints with deep plate
Linkage. The 980H linkage is a dual-tilt
Caterpillar for durability in all operating penetration welds and excellent fusion
Z-bar design. Z-bar linkage generates
conditions. The front axle is rigidly for maximum strength and durability.
excellent breakout force and good rack
mounted to the frame to support the
Rear Frame. A full box-section engine back angle for better bucket loading and
weight of the wheel loader and withstand
end frame with hitch plates at the front load retention. The Z bars' light weight
internal torque loads as well as external
end provides a strong, rigid structure compared to other linkage designs allows
forces encountered throughout operation.
that resists twisting and impact loads. for more payload capacity. Lift arms are
The rear axle is designed to allow ±13°
The result is an extremely solid solid steel, providing superior strength
oscillation. All four wheels remain on
mounting platform for the engine, with an excellent front end viewing area.
the ground over uneven terrain providing
transmission, axle, ROPS and other The proven design offers excellent dump
excellent stability and traction.
accessories. clearance and reach for exceptional
matching to on- and off-highway trucks.
Rotary sensors, for the tilt lever and lift
circuit allow the operator to electronically
set detent positions from the cab.
5
Productivity and Versatility
Work Smart And Move More
Electro-hydraulic controls reduce Automatic Kick-Outs. The standard Planetary Power Shift
cycle times programmable automatic kick-outs Transmission.
provide flexibility and productivity for Increases number of
Consistent horsepower regardless
precise load and dump target heights. cycles per hour.
of conditions
Tilt, lift and return-to-dig kickouts are The electronic
A variety of buckets and work tools set by positioning the bucket or work tool planetary power shift
for many applications and setting a rocker switch in the cab. transmission with
automatic shift capability is
Electro-hydraulic Implement Controls. Constant Net Horsepower. On many
designed, developed and built by
Finger Tip electro-hydraulic implement competitive machines, gross horse-
Caterpillar. The electronically
controls on the 980H provide the power is constant, meaning that net
controlled power shift trans-
operator with responsive, smooth and engine power available for actual
mission allows full power, very
precise control of bucket and lift arms. work will vary based on demands
responsive directional changes that have
made from parasitic sources, such as
Single Lever Control. The optional a direct impact on machine cycle times
air conditioning or cooling fans.
single lever (joystick) hydraulic control and productivity. The operator can choose
The Cat C15 engine is electronically
is retained with the 980H. It is a dual between manual or autoshift modes.
configured to provide constant net
axis control, with fore and aft motion
horsepower at full parasitic load Variable Shift Control.
controlling the lift function.
enhancing productivity and improving Match transmission shifting patterns
An additional feature of the
fuel efficiency. to machine application requirements.
hydraulic system is the Full
Variable Shift Control (VSC) improves
Rack Angle Control (FRAC). Separated Cooling System. Many
shift quality and fuel efficiency in certain
This feature auto- competitive loaders use cooling systems
applications by allowing the transmission
matically adjusts that pull air in from the sides, through
to upshift at lower engine RPMs.
the bucket angle the engine compartment and exhaust it
as it is raised to out the rear of the machine. The 980H Ride Control. The optional Ride Control
maintain a cooling system is isolated from the System improves ride, performance and
constant angle. engine compartment by a non-metallic load retention when traveling over rough
shield. The hydraulically driven, terrain. Operators gain confidence moving
variable speed fan draws in clean air at higher speeds in load and carry
from the rear of the machine and operations decreasing cycle times and
exhausts it out the sides and top of increasing productivity.
the hood. The end results are optimal
Aggregate Autodig. Well-received by
cooling efficiency, increased fuel
both experienced and novice operators,
efficiency, less radiator plugging
the optional Aggregate Autodig fully
and reduced operator sound levels.
automates the loading process.
6
1
7
6
4 5
3 10 11 12 13 14 15
1 Universal Buckets. This is a complete 4 Rock Buckets. Caterpillar rock 7 Forks. Pallet forks are the ideal tools
line of flat floor buckets, designed for buckets are built to tough standards. for handling a variety of materials.
loose material (re)handling. Equipped The spade-edge design provides easier These forks are available in different
with various GET (Ground Engaging penetration and makes them well sizes, pin-on or fitted with dedicated
Tools), they provide easier pile penetra- suited for high-impact jobs. Optional quick coupler hinges.
tion, better fill factors and faster loading Ground Engaging Tools include bolt-
Quick Coupler Buckets. A wide range
cycles; they are offered in a wide range on cutting edge and weld-on two-strap
of buckets fitted with dedicated quick
of capacities. All buckets feature bottom adapters to be fitted with Caterpillar
coupler hinges is available. Caterpillar
and side wear plates for greater durability. K Series tips, with or without standard
offers you the right bucket for the right
Universal buckets are for use with both or heavy-duty bolt-on segments.
application.
standard and high lift arm configuration.
5 Serrated V-Edge Rock Buckets.
High Dump Buckets. These buckets
2 General Excavation Buckets. Built to These rock buckets provide excellent
increase the dump height of the machine
handle the toughest conditions, these penetration characteristics in low-
and make it possible to tip loose material
buckets are excellent for bank and abrasion applications. The replaceable
over high barriers. Ideal for applications
excavation applications. They feature V-edge has self-sharpening teeth and
as various as loading stockpiled, light
proven, shell-tine construction that chamfers. There are no GET (pin-on or
material into high sided trucks or hoppers
resists twisting and distortion. Bucket bolt-on) – like tips – installed, which
in waste transfer stations or rehandling
hinges are part of the structure that tremendously reduces the chance of
fertilizer, coal or grain. The high dump
extends under the bucket shell to iron falling into the crusher. The flat
buckets are hydraulically operated and
the cutting edge, forming box sections bucket floor provides excellent clean-
require a 3rd valve.
that resist impact forces. All buckets up capability. In the correct application
have integral spill plates that prevent the serrated edge bucket lowers the K Series Tip Selection. The new
possible spillage over the linkage. cost per ton for the entire machine. Caterpillar K SeriesTM Tooth System
Replaceable rear wear plates protect holds tighter, changes easier and
6 Dedicated Quick Couplers.
the bottom of the bucket. Bucket side stays sharper.
Allow the operator to perform a wide
plates are also reinforced in their lower 10 General Duty
variety of tasks with just one machine
portion with additional wear plates. 11 Extra Duty
and various work tools, providing
Buckets feature Corner Guard System and 12 Penetration
unmatched versatility and resulting
can be fitted with optional bolt-on GET. 13 Penetration Plus
in cost efficiency. With the separate
14 Heavy Penetration
3 Corner Guard System. Allows maximum optional quick coupler circuit, actuate
15 Heavy Abrasion
flexibility between teeth and edge systems the quick coupler and change and
for superior protection and performance operate non-hydraulic work tools A complete range of work tools is
in each application. Featured on General from the cab. The third valve can be available from your Caterpillar dealer.
Excavation buckets and some Universal used to actuate hydraulic work tools,
buckets. like high dump buckets.
7
Operator Comfort
Work Comfortably And Efficiently
Comfortable operation
Excellent visibility
Easy entry and exit
Controlled vibration
Operator Environment. The 980H
maintains the distinction of offering the
largest, most ergonomic cab in its class.
Seat. The Cat C-500 Series Comfort air
suspension seat, standard in the 980H,
is built strong and durable and is 6-way
adjustable to accommodate all-sized
operators. The cast one-piece back and
seat pan prevent protrusions under the
cushions. The seat features an automotive-
style lumbar support for maximum
comfort. The right hand armrest with
integrated implement controls adjusts
for comfortable, convenient operation.
A heated seat option is available for
additional comfort.
Vibration. By controlling normal
machine vibrations, operator efficiency
and productivity are improved. From the
ground up, the Cat 980H is designed
with many features, both standard and
optional, that reduce vibration.
The oscillating rear axle follows the
reduce jolting and bouncing during Command Control Steering. Full machine articulation is accomplished
load and carry operations. This is a load-sensing system that links with a ±70° turn of the wheel – versus
Electronically controlled, automatic the steering wheel and frame angle two to three 360° turns of a conventional
kickouts prevent the jerking and positions to provide the proper amount steering wheel. The Command Control
bouncing associated with abrupt of steering control. The speed the Steering wheel contains the forward/
cylinder stops. machine turns is proportional to the neutral/reverse switch and the upshift/
Air suspension seat-mounted steering wheel position. Less than downshift button – allowing the left hand
implement controls reduce vertical 26 N steering effort is required by to remain on the steering wheel at all
vibrations that come up through the operator, regardless of conditions. times. The CCS column inclines 35° and
the cabin floor. the telescopic change is up to 100 mm.
8
Controls. The main control panel on the Rear Vision Camera. An optional rear Entry and Exit. A ladder with self-
980H is located high on the right ROPS vision camera is available to clearly cleaning steps keeps debris build-up
post – keeping everything within reach monitor movement behind the wheel to a minimum. The ladder is at a 5°
of the operator while maintaining loader. forward incline for easy entry and exit.
visibility to the ground. Keeping all Platforms are wide allowing ease of
Lighting Packages. Optional lighting
switches and controls conveniently movement to the front or rear of the
packages are available for roading or
placed allows better operator efficiency machine. The main cab door opens a
low-light applications. The optional
and improved productivity, while full 180° and latches in place to allow
High Intensity Discharge (HID) lights
minimizing operator fatigue. safe navigation to the rear of the
provide exceptional lighting for night
machine. The right side door opens 10°,
Optional Aggregate Autodig System. work. A rotating beacon is available as
or completely for secondary exit simply
It provides smoother loading cycles a safety feature.
by pulling a pin. A full-length ladder
and consistently full payloads without
Windshield Cleaning Package. on the right side facilitates safe exit
touching the controls – reducing
An optional windshield cleaning if needed.
operator fatigue.
package provides additional steps and
Visibility. The 980H provides excellent handrails to provide easy access for
visibility to both the front and rear of cleaning the front windows.
the machine. Distortion-free flat glass
stretches to the floor of the cab for
excellent visibility to the bucket. Wet-
arm wipers on both front and back keep
the windows clean in any condition.
The cab roof has channels that direct
rain off the corners of the cab keeping
windows clear. An overhang on all
sides protects the operator from glare.
9
Serviceability
Easy To Maintain – Easy To Service.
Engine Compartment Access. Cooling System. Access for clean-out Autolube. Reduce time spent on daily
The non-metallic hood on the 980H and maintenance is outstanding. The per- maintenance and downtime for un-
has been redesigned and restyled from forated and corrugated grill minimizes planned repairs due to inadequate
previous models. Side and top panels debris build-up and swings out for easy greasing with the optional Caterpillar
are stronger due to more robust re- cleaning and access to the cooling cores. Automatic Lubrication System.
inforcement ribs – the change in contour The full-width air conditioning Precise lubrication of pins and
also adds to rigidity of the hood. condenser and oil cooler cores swing bushings at specific intervals
Panels located behind the tires lift up out 45° to allow easy cleaning of decreases component wear and
and can be removed for additional the rear radiator face. Panels on either reduces ground contamination
access. Roading fenders hinge from side provide access to the front face from excessive greasing.
the rear and swing out allowing easier of the radiator and ATAAC cores for
access to the engine compartment. easy cleaning.
The tilting hood provides excellent With the hood closed, quick checks of Sight Gauges. Well-protected,
access to the engine compartment, and engine oil level and the coolant sight yet easily visible sight gauges for
if necessary, the entire hood can be gauge can be completed through the the transmission oil, hydraulic oil and
removed with the built-in lift points. side service doors. engine coolant allow easy daily checks
while reducing the risk of contaminants
Ecology Drains. Engine, transmission Electric Priming Pump. An electric fuel
entering the systems.
and hydraulic oils can be easily drained priming pump located on the primary
with standard-equipment ecology drains. fuel filter base eliminates the need to
An axle oil ecology drain is optional. pre-fill or manually prime filters after
a change, eliminating engine
contamination.
10
Convenient access to engine compart- Grouped service points and sight Cab. The entire operator station can be
ment for excellent serviceability gauges for easy daily maintenance removed in about 45 minutes and is
Swing-out grill and cooling cores Axles are equipped with standard easy to re-attach. Quick disconnects are
for easy cleaning brake wear indicators, allowing a used so no wires need to be cut and no
Electronic systems to monitor technician to easily determine when it refrigerant is lost.
product health is necessary to service the brakes. Cab cleaning is made easy with
channels on the cab floor and no
threshold at the door – the floor can be
swept or mopped out easily.
Windshield Cleaning Package.
An optional windshield cleaning
package consists of two steps for the
loader front frame, two additional
handrails and a folding mirror.
This package allows access to the entire
front windshield for easy cleaning.
Complete Customer Support.
Cat field service technicians have the
experience and tools necessary to
service your loader on site. Technical
experts at the dealership and Caterpillar
can provide additional assistance to
field service technicians as needed.
When on-site repair isn’t enough,
Cat dealerships are fully equipped to
Diagnostic test ports conveniently Maintenance-free batteries provide
service your loader quickly.
located behind the cab long life
Hydraulic oil filter change interval Ground level compartment for secure
at 500 hours tool storage
Transmission oil filter change interval
at 1000 hours
11
Owning and Operating Cost
The 980H – Best Value For Your Operation
More return for your wheel loader ACERT Technology Fuel Economy.
investment through proven Cat fuel Based on Caterpillar testing, the fuel 2
efficiency economy of Cat engines with ACERT
technology is 3 to 5 percent better than
Sight gauges, grouped maintenance
current competing technologies.
points, easy engine access, ecology 4
This fuel economy is directly related 3
drains, maintenance-free batteries all
to the complete combustion of fuel due
simplify daily maintenance
to the integration between the electronic
Electronic monitoring systems track control that monitors conditions, 1
product health to avoid unscheduled the air management system that controls
costly repairs air volume and the fuel injection system
that delivers just the right amount of
Unsurpassed parts availability 1 Variable Shift Control (fuel efficiency).
fuel as needed.
reduces downtime VSC improves shift quality and fuel
Engine Idle Management System. efficiency in certain applications by
Excellent resale value provided by
The Engine Idle Management System allowing the transmission to upshift
genuine Cat quality, outstanding
(EIMS) maximizes fuel efficiency at lower engine RPMs.
dealer service and unmatched dealer
and provides flexibility in managing 2 ISO symbol for fuel efficiency
support programs
idle speeds for specific application 3 Economy mode (typically used for
Caterpillar Financial Services and Cat requirements. Four idle control speeds load & carry and roading applications)
dealers understand your business are available. 4 Aggressive mode (typically used for
tight truck loading applications)
Fuel Efficiency. Many manufacturers On-Demand Fan. Temperature levels
tout fuel consumption as one of the of the engine coolant, transmission oil, Free Wheel Stator Torque Converter.
determining factors for machine hydraulic oil and air inlet manifold are The free wheel stator torque converter
acquisition, but fuel consumption is constantly monitored to adjust the speed improves power train efficiency in load
only part of the story. Productivity must of the fan to cooling requirements. and carry operations which contributes
also play a part in the decision. Controlled fan speed improves fuel to the fuel efficiency of the 980H.
ACERT Technology efficiency. 5 Impeller
Engine Idle Management System 6 Turbine 6
On-Demand Fan 7 Stator 5
Variable Shift Control 8 Output shaft
Free Wheel Stator Torque Converter 7
12
Maintenance. Proper maintenance of Customer Support Agreements. Machine Security System. Stolen equip-
your wheel loader can help control A Customer Support Agreement (CSA) ment equates to lost production and
expenses and lower your owning and is any arrangement between you and increased costs. Eliminate machine theft
operating costs. The 980H provides your Cat dealer that helps you lower and unauthorized usage with the Cat
unmatched serviceability. your total cost per unit of production. Machine Security System (MSS). It is
Well-protected, easily visible CSAs are flexible, allowing them integrated into the machine’s electronic
sight gauges to be tailored to your business. system and can protect most brands of
Ground level maintenance points They can range from simple Preventive equipment by requiring a uniquely coded
Easy access to engine compartment Maintenance Kits to sophisticated Total key to start the machine.
Ecology drains for simple and clean Cost Performance Guarantees. Having
Caterpillar Equipment Training Solutions.
fluid drainage a CSA with your Cat dealer allows you
A thorough understanding of machine
Brake wear indicators for ease of more time to do what you do best – run
systems and a high level of skill in
inspection your business.
operation helps achieve maximum
Airborne debris-resistant, swing-out
efficiency and improves return on
grill provides more efficient airflow
investment. Caterpillar Equipment
S•O•S Services. Managing component Training Solutions programs help provide
life and machine availability decreases operators with high levels of proficiency
downtime while improving your produc- and confidence. Contact your Cat Dealer
tivity and efficiency. S•O•S Services can for more information on Caterpillar
help you do that. Regular fluid sampling Equipment Training Solutions programs.
is used to track what is going on inside
Caterpillar Financial Services Corporation.
the equipment. Wear-related problems
Cat Financial understands your business,
are predictable and easily and quickly
your industry and the challenges you
repairable. Maintenance can be done
face. That’s why they can provide
according to your schedule, resulting
payment plans to fit your unique needs –
in increased uptime and flexibility in
and to help you achieve your goals.
maintenance and repair before failure.
Parts Availability. Caterpillar provides Resale Value. Owning quality equipment
Product Link. With Product Link owners
an unsurpassed level of personalized is a very important factor in maintaining
can collect and track multiple types of
service for your wheel loader. resale value. Cat not only supplies quality
information – from machine location
With parts distribution centers world- equipment but also provides product and
and service meter hours, to health and
wide, most parts can be delivered in dealer support to maintain the reliability
productivity information.
24 hours. Easy access to parts reduces and durability of your machine.
EquipmentManager. With a subscription downtime.
to EquipmentManager information from
Product Link can be transmitted to a
computer. Return on equipment invest-
ment is optimized through maintenance
management and improved uptime.
13
Engine Sound ROPS/FOPS
Cat C15 with ACERT Technology The operator sound pressure level Caterpillar cab with integrated
Gross Power 261 kW/355 hp measured according to the procedures Rollover Protective Structure (ROPS)
Net Power at 1800 rpm specified in ISO 6396:1998 is 75 dB(A) is standard in Europe.
for the cab offered by Caterpillar, Rollover Protective Structure ROPS
ISO 9249 237 kW/322 hp
when properly installed, maintained meets ISO 3471:1994 criteria.
80/1269/EEC 237 kW/322 hp and tested with the doors and Falling Objects Protective Structure
Peak Torque (net) at 1200 rpm 1615 Nm windows closed. (FOPS) meets ISO 3449:1992
Total Torque Rise 28% Hearing protection may be needed Level II criteria.
Bore 137 mm when operating with an open operator
Stroke 172 mm station and cab (when not properly
maintained or doors/windows open)
Displacement 15.2 liter
for extended periods or in noisy Brakes
All engine horsepower (hp) are metric environments.
including front page. The European Union 2005/88/EC
EU Stage IIIA compliant labeled spectator sound power level Meet ISO 3450:1985 standard.
Rating for net power advertised based is 108 dB(A).
on power available when the engine
is equipped with alternator, air cleaner,
muffler and on-demand hydraulic fan
drive at maximum fan speed.
12
➤
➤
➤
➤
➤
13 7
➤
1
➤
14 5
2 ➤
3
➤
15
10
➤ ➤
4
➤
➤
➤
➤
➤ 11 ➤
➤ 8 ➤➤ 9 ➤
mm
1 Height to top of ROPS 3765 10 Bucket hinge pin height at carry (B-pin) 867
2 Height to top of exhaust pipe 3716 11 Center line of rear axle to hitch 1850
3 Height to top of hood 2716 12 Rack back at maximum lift 61°
4 Ground clearance with 29.5 R 25, L-3 442 13 Dump angle at maximum lift 47°
5 Lift arm clearance and maximum lift 3764 14 Rack back at carry 49°
6 Bucket hinge pin height (B-pin) 4505 15 Rack back at ground 41°
7 Optional lift height 4726
8 Center line of rear axle to edge of counterweight 2493
9 Wheelbase 3700
Tire Specifications
Bolt-on Flush-Mounted Bolt-on Flush-Mounted Bolt-on Tips and Bolt-on Tips and
Cutting Edge Teeth Cutting Edge Teeth Cutting Edge Segments Cutting Edge Segments
Rated bucket capacity m3 6.1* 6.1* 5.6 5.6 6.1* 6.1* 5.7 5.7
Struck capacity m3 5.3 5.3 4.9 4.9 5.2 5.2 4.9 4.9
Dump clearance at full lift and 45° mm 3131 2909 3184 2961 3222 3059 3266 3108
discharge 4
Reach at full lift and 45° discharge 4 mm 1404 1664 1350 1611 1597 1732 1537 1678
Reach with lift arms horizontal mm 3032 3373 2957 3299 3086 3295 3013 3223
and bucket level 4
Digging depth mm 193 153 193 153 141 141 141 141
Overall length 4 mm 9531 9852 9456 9778 9543 9781 9470 9702
Overall height with bucket at full raise mm 6355 6355 6272 6272 6435 6435 6343 6344
Loader turning radius with bucket mm 8012 8083 7993 8063 7934 8044 7915 8021
in carry position
Static tipping load straight 1 kg 20940 21102 21127 21288 22755 22724 23184 22966
Static tipping load kg 18790 18948 18969 19128 20360 20323 20778 20575
at full articulation (37˚) 1
Breakout force 2 kN 204 205 215 216 199 198 212 211
Bucket weight kg 3401 3300 3296 3190 2981 3072 2828 2902
Operating weight 1 kg 31348 31247 31243 31137 31324 31415 31171 31245
1 Static tipping load and operating weight shown are based on average machine configuration with
sound suppression cab and ROPS, secondary steering, air conditioning, ride control, limited slip rear,
roading fenders, autolube, front access platform, back-up alarm, 29.5 R 25, L-3, tires for Universal
buckets, L-4 tires for General Excavation buckets, L-5 tires for Rock buckets, full fuel tank, coolant,
lubricants, lights, directional signals, CE plates and operator.
2 For buckets with adapters, tips and segments, value is measured 100 mm behind the tip of the segment,
with bucket hinge pin as pivot point, in accordance with SAE J732C.
3 All buckets shown can be used on the high lift arrangement. High lift column shows changes in
specifications from standard lift to high lift. Add or subtract as indicated to or from specifications
given for appropriate bucket to calculate high lift specifications.
Dimensions for dump clearance, reach and overall length:
4Actual dimensions taken at the tip of the Ground Engaging Tools, either the tip of the bolt-on
cutting edge or the tip of the teeth, general duty.
4.5 4.5 4.2 4.2 3.9 3.9 4.3 3.7 4.3 3.7 same
3447 3533 3447 3533 3447 3533 3504 3504 3492 3645 same
3306 3149 3369 3213 3442 3289 3038 3208 3103 3180 +221
1508 1650 1460 1604 1410 1557 1903 1773 1912 1752 +2
2963 3173 2883 3093 2793 3003 3445 3239 3413 3237 +159
141 141 141 141 141 141 150 100 114 68 +99
9420 9652 9340 9572 9250 9482 9948 9696 9871 9729 +201
6271 6271 6201 6201 6125 6125 6290 6408 6290 6399 +221
7902 8008 7881 7987 7859 7963 8153 8010 8123 8021 +72
23142 23113 23364 23336 23621 23593 22272 23701 22940 23942 -1774
20747 20714 20957 20925 21200 21168 19806 21177 20474 21418 -1620
220 219 234 233 252 250 177 206 163 181 same
2757 2830 2667 2741 2570 2643 3795 3084 3285 2907 same
31100 31173 31010 31084 30913 30986 33310 32599 32800 32422 +129
1500
1700
1900
2100
2300
2500
1200
1400
1600
1800
2000
2200
2400
kg/m 3
% = Bucket Fill Factor kg/m3
In accordance with SAE J818, these data consider the bucket load to be equal to half of the static tipping load at full turn.
17
Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for specifics.
www.CAT.com
Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. © 2006 Caterpillar
HEHL3423 (01/2006) hr See your Caterpillar dealer for available options. All Rights Reserved