DM30 II SP Blasthole Drills

Single-pass rotary and down-the-hole (DTH) drilling

 For details on how the DM30 II SP
can enhance your profitability,
Speed.
contact your Epiroc representative
or visit epiroc.com. Efficiency.
Reliability.
The new DM30 II SP is pure gold.

High quality at an excellent value sets the DM30 II SP

apart from other drills in its class. A small footprint
makes it easy to maneuver on tight benches and simple
to transport over the road between pits.

Built for the job

The DM30 II SP is a crawler-mounted, hydraulic tophead-
drive rig that’s suitable for a variety of single-pass rotary
and DTH drilling applications. It can achieve a clean hole
depth of 36 ft (11 m) in single-pass applications.

Powerful performance
Designed to handle 4 to 6-1/4 in drill pipe, the DM30 II SP
has a pulldown of up to 30,000 lbf (133.4 kN) and delivers a
hole diameter of 5 to 7-7/8 in (140-200 mm).

Options to fit your application

Choose a low- or high-pressure compressor to create the
right configuration for your drilling operation. You can also
add on-board technology capabilities with the optional
Rig Control System Lite (RCS Lite) for added safety and
productivity.

2 3
 Designed for maximum
productivity and value
+ Operator comfort
The DM30 II SP features an insulated, pressurized cab with tinted glass, a 6-way
adjustable swivel seat and excellent visibility. All operational functions are controlled from
the driller’s console, and the ergonomic layout allows operators to instantly switch from Electronic Air Regulation System
drilling to tramming for increased productivity. In addition, the electric-over-hydraulic (EARS) allows you to easily
controls are common across the DM series, making operation easy for drillers with DM adjust your compressor to save
series experience. Plus, with a rating of 80 dBA, the noise inside the cab is kept to a horsepower and fuel consumption
minimum for greater operator comfort. for a lower total cost of ownership.

+ Ease of maintenance
The deck layout on the DM series offers easy access to all major service components.
Optional fast fill connections, a tower access ladder, and tower fall restraint are available
to complete your DM30 II SP.

Spacious one-piece FOPS

(Falling Object Protective
Structure)-rated cab is
A 300 gal. (1136 L) fuel
designed for visibility and
+ Enhanced safety operator comfort.
tank allows the rig to run
for 11 hours before refill.
The DM30 II SP is equipped with a number of features to help keep operators safe on the
job. Features include a FOPS cab, ground-level isolation and an airend safety shutdown
system for high-temperature situations. Additional safety features include a back-up
alarm, head-up propel interlock, tramming inclinometer, and “ jacks up” indicator lights.

Service and support

Epiroc offers several types of service agreements to
meet your operational requirements and maximize your
productivity:

Variable-price repairs
Service when you need it.
Fixed-price repairs
Service with controlled costs.
Equipment audit Structural components stand up
Scheduled equipment quality control. to the heavy-duty cycles required Main frame is verified by dynamic
Preventive maintenance programs of a mining drill. Frame and tower strain gauging and is designed to
Peace of mind so you can focus on your core business. weldments are designed to last last over 45,000 hours.
for the life of the machine.

4 5
 Technical specifications

Flexibility for the future Sub structure

Mainframe 44.35 lb/ft (66 kg/m)
• Weld fabricated I-beam type using wide flange structural steal beam for both rails and crossbeams
Add flexibility to your DM Series drill rig with Epiroc’s Rig Control System (RCS) Lite. Built on the RCS 5 platform • Designed by Epiroc, and weld fabricated by certified welders
that comes standard on the Pit Viper series, RCS Lite offers a number of safety and interlock features. It also Leveling jack
provides a convenient foundation to add more functionality and technology options in the future without a major Type Hydraulic cylinder
rebuild of the machine. In addition, RCS Lite allows all Epiroc rotary drills to have the same onboard display and Quantity Three jacks
system for consistent operator training and service. It’s a modular solution that delivers efficiency now, along with Jack pad diameter 18 in (457 mm)
the opportunity to enhance your equipment down the road as your mining requirements grow.
Position indication “Jack up” indicator lights on console or RCS screen
Capacities
Fuel tank 300 gal (1136 L)
Water tank 210 gal (795 L)
Hydraulic tank 150 gal (568 L)
Undercarriage and propel system
Make Epiroc or Caterpillar 320L
Mounting Oscillating walking beam: 5° each side, total 10°
Total length 174 in (4.44 m)
Ground contact 143.5 in (3.65 m)
Home screen: all selections are done Take-up adjustment Grease slack adjustment; hydraulic recoil
Drilling: shows information about Setup and Propel: shows machine
from the main menu. 9 lower/2 upper for Epiroc
pressures and flows for various systems conditions during setup and while Rollers
during drilling. propelling. 8 lower/2 upper for CAT
Location Strategically located for load distribution relative to the tower position (vertical or horizontal)
Roller bearings Sealed for life
Type: Triple bar grouser — for increased grip and reduced ground pressure
Track pads Width: 19.69 in (500 mm)
Ground pressure: 13 psi (89.6 kPa)
Drive Hydrostatic closed loop through planetary speed reducer
Propel motors Two - Hydraulic, axial piston, fixed displacement rating (each): 147 HP (110 kW)
Propel speed range 0 – 2.0 mph (0 - 3.22 km/hr)

Drill Plan: shows the interactive drill plan. User: sets the control system language. Performance: shows statistics about the
Logs in users to the control system and machine and drilling consumables.
shows user information.

Choose from three packages

RCS Lite | Basic RCS Lite | Connected RCS Lite | NAV

• RSC 5 touchscreen display and GUI with: Includes all features of RCS Lite | Basic, plus: Includes all features of RCS Lite | Connected, plus:
– Real-time depth and pen rate • CCI module for data storage and • GPS-ready with brackets (Option A) OR
feedback with histogram. transmission to wireless network high-precision GPS installed (Option B)
– Rotation RPM and pressure (torque). – Rig events, drilling quality, drill status, etc.
– Pulldown/holdback. • Moving map display software
– Air pressure, water tank level. • Surface manager • Geofence capability
– On-screen machine inclinometers. • Remote desktop viewer
• Autolevel • Measure while drilling
• Safety features • Onboard storage
– Pipe-in-hole interlocks. • Operator ID and management
– Stability interlock.
• Delay code management and reporting
• CertIQ capable
• Consumable tracking

6 7
 Technical specifications Technical specifications
Tower, carousel and drill rod handling Cab and controls
Tower Cab
Tower construction Fully welded four main member with open front ASTM A500; rectangular steel tubing • Thermally insulated and pressurized
Two hydraulic cylinders; live tower • Adjustable suspension swivel seat with seat belt
Tower raising • Two hinged and lockable doors
(raise and lower with full carousel and rotary head at top of tower)
• Quiet (tested at 80 dBA)
Rod support Hydraulic cylinder clamping and actuation to center drill rod • Falling Object Protective Structure (FOPS) certified
Rated capacity • Side-mounted air conditioning (easier to service as no roof access required)
• Ergonomically designed wrap-around console
Single pass depth 36 ft (11 m) • Windshield wiper on drilling and rear tramming window
Maximum hole depth 36 ft (11 m) Controls
Carousel (carousel internal to the tower with key-lock retention) - for servicing steel only All drilling and propelling functions are hydraulically powered with ergonomically
Rod length 30 ft (9.1 m) grouped controls
Capacity • One Piece of 4in to 6-1/4 in • Drilling function
• Compressor function
Actuation Two hydraulic cylinders
Panels • Propel, leveling and tower raising function
• Drill pipe is held securely in carousel by “key lock design” mechanism • Gauges for system pressure, temperature, etc.
Safety
• No bump system to prevent damage if carousel not stowed • Engine start and gauges
Drill rods Hydraulic system
Drill pipe diameter x 30 ft (9.1 m) Thread Suggested bit diameter • Hydraulic pumps mounted on a single three-hole gearbox driven off the engine through a drive shaft
4-1/2 in (114 mm) 3-1/2 in API 5-1/2 in – 6-3/4 in (140 mm – 171 mm) • Two variable displacement main pumps for propel, drill feed and rotation functions
• One double pump for setup, auxiliary functions and cooling fan
5 in (127 mm) 3-1/2 in API or BECO 6-3/4 in (171 mm)
5-1/2 in (140 mm) 3-1/2 in BECO 7-7/8 in (200 mm)
6-1/4 in (159 mm) 4” BECO 7-7/8 in (200 mm)
Power package
Rotary head
Airend
Speed range Variable 0 – 160 RPM (need to adjust displacement)
1,050 cfm @ 110 psi (29.7 m3/min @ 7.6 bar)
Torque Variable 0 – 5,400 lbf-ft (0 – 7,321 Nm)
Tier 4 engine only 900 cfm @ 350 psi (25.5 m3/min @ 24 bar)
Number of motors One 1,050 cfm @ 350 psi (29.7 m3/min @ 24 bar)
Type of motor Variable displacement axial piston Diesel engine (1,800 RPM)
Reduction 15:1 CAT C15 – 475 HP (354 kW)
Horsepower 148 HP (110 kW) CAT C15 – 540 HP (403 kW)
Diesel engine – non Tier 4
Cummins QSK15 – 475 HP (354 kw)
Travel length 43 ft 3 in (13.208) Cummins QSK15 – 530 HP (395 kw)
Feed system Diesel engine – Tier 4 Cummins QSX15 – 550 HP (410 kW)
Pulldown capacity Up to 30,000 lbf (133.4 kN)
Pullback capacity 0 – 10,000 lbf (0 – 44.5 kN)
Weight on bit Variable, 0 – 31,735 lb (0 – 14,395 kg)
Mechanism type Hydraulic cylinder with sheave block and cable
Number of cables - diameter Two pulldown, two pullback – 3/4 in (19 mm)
Number of sheaves - outside diameter Eight – 8.1 in (206 mm)
Feed speed 100 ft/min (30.5 m/min)
Retract speed 280 ft/min (85.3 m/min)

8 9
 Technical specifications Technical specifications
Dimensions and weight
Operating weight
Estimated weight 80,000 – 85,000 lb (40 – 42.5 tonnes)

Operating dimensions
(Dimensions for DM30 II SP)
Dimensions
Description
in (m)
A Height – tower up 661 (16.79)
B Distance – cab to decking non drill end 370 (9.40)
C Length – tower down 680 (17.27)
D Length – undercarriage 175 (4.45)
E Length – jack center to jack center 210 (5.34)
F Height – jack to ground, drill end 25 (0.64)
H Height – tower down 201 (5.11)
I Width – track inside to track inside 86 (2.18)
J Width – jack center to jack center, drill end 148 (3.76)
K Width – overall 205 (5.21)
M Width – track 20 (0.51)
N Height – tower off 125 (3.18)
P Height – to lowest point 22 (0.56)
R Rotary head travel 520 (13.21)
S Cab width 66 (1.68)
V Height – top of cab to ground 140 (3.56)
AA Height – jack to ground, non drill end 25 (0.64)
AB Height – decking to ground 53 (1.35)
AC Length – DCS decking 268 (6.80)
AD Length – CS decking 391 (9.94)
AE Width – decking 184 (4.67)
AJ Height – tower bottom to ground 146 (3.71)
AK Distance – frame non drill end to tower end 347 (8.81)

10 11
Optional equipment
For a comprehensive list, please contact your local
Epiroc Customer Center.

• Angle drill package – 0-30 degrees

• Epiroc dust collector
• Water injection

9863 0036 93 2020-02 Specifications and equipment are subject to change without prior notice. All rights reserved. Epiroc Drilling Solutions LLC, Garland, Texas, USA.
• Wiggins central service
• Hands free auxiliary wrench
• Cold weather options
• Cushion spindle sub
• Drill monitoring – depth and penetration rate
• Automatic lube system
• Tow hooks on non-drill end
• Tower access ladder
• Maintenance walkways
• Rotational tachometer
• Cab and tower strobe lights

United in performance.
Inspired by innovation.
Performance unites us, innovation inspires us, and
commitment drives us to keep moving forward.
Count on Epiroc to deliver the solutions you need to
succeed today and the technology to lead tomorrow.
epiroc.com