Louvretec Design Manual Section 7 300mm Airfoil
Louvretec Design Manual Section 7 300mm Airfoil
Louvretec Design Manual Section 7 300mm Airfoil
motorised - 300 maxi louvre hand OPERABLE - 300 maxi louvre END FIXED - VERTICAL PANEL
END FIXED - OVERHEAD panel BRACKET FIXED - VERTICAL PANEL BRACKET FIXED - OVERHEAD PANEL
©Louvretec 2017. All rights reserved. Technical details subject to change without notice. 7:61
sun louvres - airfoil specifications
blade specifications
Blade cover - opening system 288 mm Weight per lineal metre 5.66 kgm
Weight per square metre - opening system 19.64 kg/sqm Actual blade width 300 mm
Blade centres - opening system 288 mm
spans at a glance NB Refer Engineering Section. Climate, terrain, shielding, location, type of structure contribute to determine spans.
WIND ZONE INSIDE LOW MEDIUM HIGH VERY HIGH EXTRA HIGH
Factored wind speed at building Self wt 32 m/s 37 m/s 44 m/s 50 m/s 55 m/s
115 km/hr 133 km/hr 158 km/hr 179 km/hr 198 km/hr
Ultimate limit state loads (kPa) +0.92 & -1.15 +1.23 & -1.53 +1.74 & -2.17 +2.24 & -2.80 +2.71 & -3.39
Adjustable and Fixed - horizontal & vertical 4800 4800 4800 4200 3700 3350
installation options
step 1
16 blades x 288 4608
1 blade at 300 300
17 blades =4908
step 2
Blade cover 4908
+ top and bottom closing
angles allow for
5mm + 5mm 10
Total exact opening height =4918*
*This is inside measure - not outer frame size.
7:62 ©Louvretec 2017. All rights reserved. Technical details subject to change without notice.
sun louvres - airfoil 3D MODELs
Somfy motor
Structural frame
Drive side
Connecting arm
Passive side
Drive blade
6.12
typical detail 3d model 300mm maxi louvre END FIXED VERTICAL PANEL
typical detail 3d model 300mm maxi louvre end fixed overhead panel
typical detail 3d model 300mm maxi louvre bracket FIXED VERTICAL PANEL
Structural tee
section vertical
Blades can be fixed at any pitch and centres supports
typical detail 3d model 300mm maxi louvre bracket fixed overhead panel
Structural tee
Blades can be fixed at any pitch
section strut
and centres