Máy Khoan HXY-5A

LIANYUNGANG HUANGHAI MACHINERY CO.
, LTD
HXY-5A Core Drilling Rig
I. General Introduction
HXY-5A CORE DRILL, the improved product based on XY-44 core drill and
integrated with the advantages and characteristics of various core drills
manufactured in China and abroad, is a kind of hydraulic driven, spindle, diamond
bit, small diameter core drill with fairly powerful drilling force. It is mainly suitable
for exploration of metal or non-metal solid mineral ore bed. It is widely applied in
core drill with diamond bit or hard tungsten-carbide tipped bit in the field of geology,
metallurgy, coal mine, hydrological and engineering drilling. It can also be used in
the fields of superficial-zone petroleum and natural gas mining, mine workings
ventilation and water discharge tunnel drilling as well as foundation pile
construction in large diameter. The machine is fit for engineering works of inclined
No.1, East Xinjian Road, Haizhou Development Area, Lianyungang, Jiangsu, China PC: 222062
Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328
E-mail: huanghaijixie@gmail.com
Website: www.hhdrillingrig.com
LIANYUNGANG HUANGHAI MACHINERY CO., LTD
and vertical hole drilling. It is compact in construction, rational in overall
arrangement, moderate in weight, convenient in assembling and wide in range of
rotation speed. Equipped with water brake, with high hoisting force, HXY-5A Core
Drill is convenient to operate in low-position and with water brake application.
II. Main Features of the rig
1. There are more speed grade (8 grades), reasonable speed range, with low speed
but high torque. The rig is adapted for core drilling with tongalley-carbid-tipped and
diamond bit, as well as suitable for engineering geological exploration, hydrological
well drilling and basic pile engineering.
2. With large spindle I.D. 93mm (3.66 inch), the rig is fed with hydraulic double
cylinders with much longer stroke up to 500mm(19.69 inch).With strong
technological adaptability, the rig can be adapted on many field, especially on large
diameter drill rod drilling, with wire line coring (upper part coring). Thus it is more
effective in improving drilling efficiency with less faulty in hole.
3. With powerful drilling capacity, the rated drilling depth comes up to 1,300m
(4,264 feet) with 71mm (2.80 inch) drill rod with wire line coring.
4. Light in weight, the rig can be dismantled into 10 parts easily (the biggest one
450kg equivalent to 992 lb). The rig weighs 3,100 kg (6836 lb) (without power unit).
It can be moved easily especially in mountain area.
5. The hydraulic chuck adopts one-way oil supply and equipped with hydraulic lock.
The chuck is powerful and stable in clamping.
Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328
6. Equipped with water brake, the rig is steady and secure in deep hole drilling.
7. Supplying oil with a single-gear pump, it is easy for installation and application;
lower in consumption of energy and a low temperature of hydraulic system oil; the
rig is for sure in steady drilling. The hand oil pump may be used to hoist the drilling
tools in hole upon the faulty of power engine.
8. Compact in structure and reasonable layout, and all exposed outside, non
overlapped components, it is easier for maintenance and repair.
9. Low center of gravity and long traveling distance up to 460mm (18.11 inch), the
rig is reliable and stable in high speed drilling.
10. It is easy to get to know the conditions in hole with an ant vibration meter in
long working life. Having less operating handle, the rig can be operated credibly and
flexibly.
11. Under high generalization rate, the rig is in universal parts and components up to
30﹪with XY-44 drill Rig
Ⅲ. Main Technical Specifications

1. Drilling Capacity (Core Drilling):
Sorts of Drill Rod Drill Rod Spec. Drilling Depth
Φ43×6mm(Φ1.69×0.24 inch) 1,800 m (5904 feet)
Planer in and
Φ54×6mm (Φ2.13×0.24 inch) 1,300 m (4264 feet)
Home made out
Φ67×6mm (Φ2.64×0.24 inch) 1,100 m (3608 feet)
Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328
Φ50×5.5mm
(Φ1.97×0.22 inch) 1,500 m (4920 feet)
Thickened Φ60×6 mm (Φ2.36×0.24
inner inch) 1,200 m (3936 feet)
Drill Rod
Φ55.5×4.75 mm
(Φ2.19×0.19 inch) 1,600 m (5248 feet)
Extracting
Φ71×5 mm
(Φ2.80×0.20 inch) 1,300 m (4264 feet)
core with wire
line Φ89×5 mm
(Φ3.50×0.20 inch) 1,000 m (3280 feet)
DCDMA BW 1,500 m (4920 feet)
(Diamond Thickened NW 1,200 m (3936 feet)
Core inner HW 900 m (2952 feet)
Drill BQ 1,800 m (5904 feet)
Manufacture NQ 1,300 m (4264 feet)
Association) Extracting
made core with wire
Drill Rod line HQ 1,000 m (3280 feet)
2. Drilling Angle: 0°～360°(90°～75°, when drilling with a drilling tower)

Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328
3. Power Unit:
（1）Electrical Motor Y250M-4 55 kw(73.8HP) 1,480 rpm

（2）Diesel Engine Deutz F6L913 97 kw(130HP) 1,600 rpm
4. Rotator:
Type: dual-cylinder hydraulic feeding mechanical rotating
I.D. of Spindle: Φ93mm (3.66 inches)
Rotating Speed of Spindle (rpm):
Positive: Low Speed 95,166,249,359
High Speed 330, 575, 865, 1246
Negative: 55191
Max. Torque of Spindle: 5,500 N·m (4053.5 lbf·ft)
Stroke of Spindle: 500 mm (19.69 inch)
Max. Lifting Capacity of Spindle: 135 KN (30348 lbf)
Max. Pressuring Force of Spindle: 100 KN (22480 lbf)
5. Hoister:
Type: Planetary gearing transmission
Steel Wire Cable Dia: 18.5 mm (0.73 inch)
Drum Capacity for Cable: 120 m (394 feet) (Φ18.5 mm equivalent to 0.73 inch steel
wire rope)
Max. Lifting Force (single line): 60 KN (13488 lbf)
Lifting Speed of the Wire Cable: (Power Eng. Speed at 1,500 rpm)
0.77；1.35；2.03；2.93 m/s (2.53；4.43；6.66；9.61 feet/s)
6. Clutch:
Type: Dry Double Chips Friction Clutch (normally closed)

7. Gearbox:
Type: Sliding Gear Gearbox (4 positive speeds and 1 negative speed)
Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328
8. Hydraulic System:
（1）System Pressure:
Working Pressure: 8 Mpa (1160 psi)
Max. Pressure: 12 Mpa (1740 psi)
（2）Oil Pump:
Type: Double Gear Pump
Displacement: 32+12 L/min (8.5+3.2 US Gallons/min)
Working Pressure: 20 Mpa (2901 psi)
Max. Pressure: 25 Mpa (3626 psi)

9. Water Brake:
Working Speed: 700 ~ 800 rpm
Single Rope Compensational Speed: 3~8 m/s (9.8~26.2 feet/s)
Single Rope Compensational Load: 45 KN (10116 lbf)

10. Drill Frame:
Type: Sliding Skids (with sliding base)
Backward Stroke: 600 mm (23.62 inch)
Dimensions (L×W×H): 3360×1300×2045 mm (132.3×51.2×80.5 inch) (with diesel
engine)
3260×1300×2045 mm(128.3×51.2×80.5 inch) (with electromotor)

11. Weight of the Rig (without power unit): 3,100 kg (6836 lb)
12. Weight of the biggest dismountable section: 450 kg (992 lb)
Tel: 0086 518 85383089/85383090 Fax: 0086-518-85826328

Máy Khoan HXY-5A

Uploaded by

Copyright:

Available Formats

Máy Khoan HXY-5A

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Máy Khoan HXY-5A

Uploaded by

Copyright:

Available Formats

LIANYUNGANG HUANGHAI MACHINERY CO.

HXY-5A Core Drilling Rig

integrated with the advantages and characteristics of various core drills

manufactured in China and abroad, is a kind of hydraulic driven, spindle, diamond

ventilation and water discharge tunnel drilling as well as foundation pile

arrangement, moderate in weight, convenient in assembling and wide in range of

Drill is convenient to operate in low-position and with water brake application.

II. Main Features of the rig

diamond bit, as well as suitable for engineering geological exploration, hydrological

well drilling and basic pile engineering.

cylinders with much longer stroke up to 500mm(19.69 inch).With strong

effective in improving drilling efficiency with less faulty in hole.

It can be moved easily especially in mountain area.

The chuck is powerful and stable in clamping.

tools in hole upon the faulty of power engine.

overlapped components, it is easier for maintenance and repair.

rig is reliable and stable in high speed drilling.

30﹪with XY-44 drill Rig

Ⅲ. Main Technical Specifications

Sorts of Drill Rod Drill Rod Spec. Drilling Depth

Φ43×6mm(Φ1.69×0.24 inch) 1,800 m (5904 feet)

Φ67×6mm (Φ2.64×0.24 inch) 1,100 m (3608 feet)

Thickened Φ60×6 mm (Φ2.36×0.24

inner inch) 1,200 m (3936 feet)

DCDMA BW 1,500 m (4920 feet)

(Diamond Thickened NW 1,200 m (3936 feet)

Core inner HW 900 m (2952 feet)

Drill BQ 1,800 m (5904 feet)

Manufacture NQ 1,300 m (4264 feet)

made core with wire

Drill Rod line HQ 1,000 m (3280 feet)

2. Drilling Angle: 0°～360°(90°～75°, when drilling with a drilling tower)

（1）Electrical Motor Y250M-4 55 kw(73.8HP) 1,480 rpm

Type: Dry Double Chips Friction Clutch (normally closed)

Type: Sliding Gear Gearbox (4 positive speeds and 1 negative speed)

Working Pressure: 8 Mpa (1160 psi)

Max. Pressure: 12 Mpa (1740 psi)

Type: Double Gear Pump

Displacement: 32+12 L/min (8.5+3.2 US Gallons/min)

Working Pressure: 20 Mpa (2901 psi)

Max. Pressure: 25 Mpa (3626 psi)

Working Speed: 700 ~ 800 rpm

Single Rope Compensational Speed: 3~8 m/s (9.8~26.2 feet/s)

Single Rope Compensational Load: 45 KN (10116 lbf)

Type: Sliding Skids (with sliding base)

Backward Stroke: 600 mm (23.62 inch)

Dimensions (L×W×H): 3360×1300×2045 mm (132.3×51.2×80.5 inch) (with diesel

3260×1300×2045 mm(128.3×51.2×80.5 inch) (with electromotor)

12. Weight of the biggest dismountable section: 450 kg (992 lb)

You might also like