Messko MTO Oil Level Indicator For Transformers
Messko MTO Oil Level Indicator For Transformers
Messko MTO Oil Level Indicator For Transformers
Design of MESSKO® MTO oil level indicator Float movement Float movement
The oil level indicator from MESSKO consists of a housing with
® in radial direction in axial direction
a display scale and a float. The float rod transmits the float‘s
stroke movement to a shaft connected to the pointer axis over
a magnetic coupling. There are two different drive types for the
float: radial and axial. The electrical connection is made out of
the connection terminals under a cover panel inside the housing
that has the connection diagram printed on it.
Optional:
l Installation with angle of inclination
(15°; 30°; 45°)
l Remote display option over optional
TT-30 signal converter
l Option for connecting an EI 100/160
remote display over TT30
l Offshore design
MTO-STF/TT
Optional: Oil level indicator with
with integrated
remote display
signal converter In areas where space is limited (installation in a buil-
for measured value ding), for very large transformers, for displaying the
remote transmission oil level in a remote control room or for connecting
to a monitoring system, all variants of the oil level
indicator can be equipped with permanently set limit
switches with the option of an analog or digital out-
MTO-STF RM put signal.
with IEC or ANSI-
compliant design l Analog outputs: (optionally adjustable at the
factory) – 0 ... 1 mA; – 0 ... 20 mA; – 4 ... 20 mA;
l Digital RS485 output (optional)
l K1 micro-switch (specify switching point when
ordering)
Matching
Switching signal accessories
at the transformer
Direct displays
1 1 Signal converter TT
2 Analog output
Signal converter
3 Digital output
RS485 standard
(optional)
2 3
4 Electronic
indicator EI100
5 Electronic
Control cabinet
Switch room /
indicator EI160
4 5
Control room
SCADA-System Additional
information:
MESSKO® MTO – OIL LEVEL INDICATOR
WITH OPTIONAL REMOTE DISPLAY.
MESSKO® MTO Technical data
Housing Sheet steel, galvanized, standard RAL 7033 color tone, other color tones on request, coated in acrylic resin
Flange Aluminum AlSi1MgMn
Viewing glass Laminated safety glass with UV filter
Cable gland Brass, nickel-plated (standard), A4 stainless steel (offshore)
Indicator scale Aluminum-coated, with UV wide format printing and protective paint
Labeling Black, indicator in red daylight luminous paint
Terminals min. 0.25 mm2 / max. 2.5 mm2
Float rod Aluminum; optional brass for L ≤ 350 mm
Float Rohacell 110, oil-resistant, temperature-resistant to 160 °C
Dial lettering „MIN“, „+20 °C“, „MAX“ (other lettering possible)
Operating temperature –40 °C ... +70 °C; limited temperature range with optional TT- box (see below)
Degree of protection IP55 (DIN EN 60529)
Ventilation Ventilation element in the gauge part for avoiding the build up of condensation water
Installation Indoors and outdoors, tropic-proof
Adjustable micro-switches: Up to 3 freely adjustable micro-switches
MTO-ST160 (G) Contact material: Silver alloy (AgNi10)
Switching capacity (separating power) AC in accordance with DIN EN 60947-5-1:
AC-12: 230 V / 5 A; AC-15: 230 V / 260 mA, 120 V / 500 mA, 24 V / 2 A
Switching capacity (separating power) DC in accordance with DIN EN 60947-5-1:
DC-12: 220 V / 200 mA, 110 V / 400 mA; DC-13: 220 V / 110 mA, 120 V / 210 mA, 24 V / 1.04 A
Permanently pre-set micro-switches: Up to 3 permanently pre-set switches
MTO-STF160 (G) Contact material: Silver alloy
AC: 250 V / 15 A / cosφ= 1; DC: 12 V / 5 A (non-inductive); DC: 250 V / 0.25 A (non-inductive)
www.reinhausen.com/messko
Bitte beachten:
Die in allen unseren Publikationen enthaltenen Angaben
können in Details von dem gelieferten Gerät abweichen.
Änderungen bleiben vorbehalten.