Curriculum of Competency Unit (Cocu)
Curriculum of Competency Unit (Cocu)
Curriculum of Competency Unit (Cocu)
Training
Competency Unit ID Level 3 186 Hours Credit Hours
EE-230-3:2013: C01 Duration
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
1. Access i. Introduction to Related Related i. Measuring
instrumentation instrumentation and Knowledge: Knowledge: instruments
& control safety control 8 Lecture parameter
procedures ii. Measuring instruments explained
parameter such as:- ii. Measuring
Pressure instruments
Flow parameter
Temperature listed
Level iii. Types and
Resistivity function of
Conductivity instrument &
control device
Inductance
listed
Voltage
iv. Types and
Current function of
Radiation instrument &
Chemical control device
composition
14
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
iii. Types and function of explained
Instrument & control v. Instrumentation
device such as:- & control safety
Valve, procedures
Relay Solenoid listed
Circuit Breaker vi. Instrumentation
Field parameter & control safety
such as:- procedures
Flow elaborated
Pressure vii. Instrumentation
& control safety
Voltage
procedures
Current
choose
Input Output according to
(I/O) operation
Level manual
iv. Instrumentation &
control safety
procedures such as:-
Instrumentation
Engineering
Instrumentation
Technology
Electrical
Electronic
Mechanics
15
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
Instrument & control
device
iv. Interpret instrumentation
& control safety
procedures
v. Finalise instrumentation
& control safety
procedures
Attitude:
i. Attentive to
details in
identifying safety
procedure
requirements
ii. Resourceful in
gathering
required
data/information
Safety:
i. Follow standard
operating
procedure to
acquire manuals
and
specifications
16
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
ii. Instrumentation safety and regulation
rule and regulation. explained
Mass flow meter iii. Control
Chlorinator system safety
Flow meter rules and
pH analyser regulation
iii. Control system safety explained
rules and regulation iv. Control
PLC system system safety
SCADA system rules and
regulation
RTU
listed
DCS
v. Work areas
iv. Work areas safety rule
safety rule and
and regulation.
regulation
explained
vi. Instrumentatio
n & control
work areas
i. Identify instrumentation Related Related Skill:
safety rule and
& control work areas Skill: Demonstration
32 regulation
ii. Determine and
implemented
instrumentation safety Observation
according to
rule and regulation. operation
iii. Determine control manual and
system safety rules and SOP
regulation
iv. Determine work areas
safety rule and
regulation.
v. Assess instrumentation
& control work areas
safety rule and
regulation
implementation.
17
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
Attitude:
i. Knowledgeable
in safety rule
and regulation
methodology
Safety:
i. Adhere to safety
requirements.
18
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
Installation operation
Commissioning manual
Operation iv. Technique of
iv. Return and write off instrumentatio
material and equipment n & control
storage procedure. safety
Declaration handling
Contamination implemented
Hazardous according to
industrial
Environmental
standard
condition
practise
v. Notes on safety
v. Material and
conventions
equipment
Control
storage
Regulation procedure
Laboratory complied
procedure according to
vi. Notes on safety icons operation
Warning manual
Caution vi. Notes on
Note safety
conventions
i. Confirm type of Related Related Skill: and icons
instrumentation & Skill: Demonstration followed as
control material and 34 and per operation
equipment handling Observation manual and
safety SOP
ii. Select method of vii. Instrumentatio
instrumentation & n equipment
control safety handling. handling
iii. Apply technique of procedures
instrumentation & implementatio
control safety handling. n checked
iv. Comply to material and according to
19
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
equipment storage operation
procedure manual and
Return SOP
Write off
v. Follow notes on safety
conventions and icons
vi. Assess instrumentation
equipment handling
procedures
implementation Attitude:
i. Proactive and
knowledgeable
in handling
equipment and
material
Safety:
i. Adhere to safety
requirements
20
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
operational Ear plug safety
Safety shoe explained
Safety helmet according to
Harness operation
Face mask manual and
ii. Tools usage such as:- SOP
Hand tools ii. Tools,
equipment
Special tools
and material
iii. Equipment usage such
usage listed
as:-
iii. Safety of
Radiation detector
equipment
Gas detector instrumentatio
Sound detector n operational
Leak detector system
iv. Material usage such as:- followed
Ammonia iv. Safety of
Soap control system
v. Instrumentation & operational
control equipment explained
operational safety such according to
as:- operation
Beacon light manual
Cone v. Safety of
Detector instrumentatio
Siren n operational
Signage followed
according to
i. Comply wear of Related Related Skill: operation
Instrumentation & Skill: Demonstration manual
control operational 36 and
safety Observation
ii. Confirm tools,
equipment and material
usage.
21
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
iii. Check and comply
safety of equipment
instrumentation
operational system
iv. Check and comply
safety of control
equipment operational
system
v. Assess instrumentation
& control equipment
operational safety Attitude:
i. Aware of the
importance to
adhere to safe
working practice.
ii. Wear safe and
protective
devices
available to
protect against
potential hazard
working place.
Safety:
i. Precaution to be
taken prior
entering working
place.
ii. Avoid wrong
selection of tools
and equipment
to carry out
instrumentation
& control
activities
22
Attitude / Safety / Training Delivery Assessment
CU Work Activity Related Knowledge Related Skill
Environmental Hours Mode Criteria
5. Prepare i. Type of instrumentation Related Related i. Instrumentatio
instrumentation & control operational Knowledge: Knowledge: n & control
& control safety failure report 6 Lecture operational
operational such as:- safety failure
safety report Accident report described
Permit to work ii. Instrumentatio
ii. Resources requirement n & control
for instrumentation & operational
control operational safety
safety accidental such accidental
as:- documented
Occupational Health according to
Safety and Advisory industrial
Services (OSHAS) standard
requirements practice and
Construction SOP
Industry iii. Instrumentatio
Development Board n & control
(CIDB) requirement operational
Department of safety report
Occupational Safety explained
and Health (DOSH)
requirement
iii. Recipient of report such
as:-
Immediate superior
High authority
Safety:
i. Adhere to safety
requirements.
24
Employability Skills
Core Abilities Social Skills
01.04 Analyse information. 1. Communication skills
01.05 Utilize the Internet to locate and gather information. 2. Conceptual skills
01.06 Utilize word processor to process information. 3. Interpersonal skills
01.07 Utilize database applications to locate process information. 4. Multitasking and prioritizing
01.08 Utilize spread sheets applications to locate and process information. 5. Leadership skills
01.09 Utilize business graphic application to process information. 6. Self-discipline
01.11 Apply thinking skills and creativity. 7. Teamwork
02.06 Write memos and letters. 8. Integrity
02.07 Utilize Local Area Network (LAN)/Intranet to exchange information.
02.08 Prepare pictorial and graphic information.
02.09 Prepare flowcharts.
02.10 Prepare reports and instructions.
02.11 Convey information and ideas to people.
03.08 Develop and maintain cooperation within work group.
03.09 Manage and improve performance of individuals.
03.10 Provide consultations and counselling.
03.11 Monitor and evaluate performance of human resources.
03.12 Provide coaching/on-the-job training.
03.13 Develop and maintain team harmony and resolve conflicts.
03.14 Facilitate and coordinate teams and ideas.
03.15 Liaise to achieve identified outcomes.
03.16 Identify and assess client/customer needs.
03.17 Identify staff training needs and facilitate access to training.
04.01 Organize own work activities.
04.02 Set and revise own objectives and goals.
04.03 Organize and maintain own workplace.
04.04 Apply problem solving strategies.
04.05 Demonstrate initiative and flexibility.
04.06 Allocate work.
04.07 Negotiate acceptance and support for objectives and strategies.
05.01 Implement project/work plans.
05.02 Inspect and monitor work done and/or in progress.
06.05 Analyse technical systems.
06.06 Monitor and correct performance of systems.
06.07 Develop and maintain networks.
25
Tools, Equipment and Materials (TEM)
ITEMS RATIO (TEM : Trainees)
References
REFERENCES
1. Bell, David A. Bell, 2007. Electronic Instrumentation and Measurements (2th edition), Oxford university Press, New York. ISBN 978-0968370520
2. Bently, John P. Bentley. 2005. Principles of Measurement System (4th Edition), Upper Saddle River: Prentice Hall. ISBN 978-0130430281
ISBN 978-1-4665-0226-0
3. Mike Cable. Calibration: A Technician’s Guide, ISA Technician Series. ISBN 978-15566179129
4. Petruzelle, F.D., 2010. Programmable Logic Controllers (3rd Edition), McGraw-Hill, New York. ISBN 978-0073510880
5. Rizzoni, G., 2004. Principle and Applications of Electrical Engineering (4th Edition), Times Mirror Higher Education Group, New York. ISBN
9780072463477
6. Robert Radvanovsky, Jacob Brodsky. Handbook of SCADA/ Control System Security. CRC press,Taylor & Francis Group.
7. Scaddan, Brian, Regulations: Design and Verification of Electrical Installations (4th Edition). Newnes, London. ISBN 978-0080969145
8. Stuart A. Boyer. Scada: Supervisory Control and Data Acquisition. ISBN 978193600-7097
9. William L. Mostia. Troubleshooting: A Technician’s Guide, ISA Technician Series. ISBN: 978-1556179129
26