Dimenzije Mašine VF-3
Dimenzije Mašine VF-3
Dimenzije Mašine VF-3
Page 1 of 4
August, 2018
95 gal 55 gal
Conveyor Coolant Coolant
Tank
Tank
10in 254mm
Conveyor
122in 3099mm
32in 800mm 49.25in 1251mm
Door Opening 152in 3861mm
42in 1067mm
168in 4267mm
Option: Multi-Auger Chip Conveyor
Minimum distance required to remove conveyor from mill is 85in (2159mm) without folding the conveyor.
Minimum distance required to remove conveyor is 50in (1270mm) when the conveyor is folded at 90 degrees and folded down as if removed.
Breakdown Height
Machine Layout Drawing VF-3 Interior Travels
Page 2 of 4
August, 2018
Notes:
1. The table shown is at XY home, the dashed is the table at max XY travels.
2. Measurements are from the edge of the table to the nearest obstruction.
3. Dimensions shown are at the top of the table. Dimensions are reduced as the height increased (5 degree slope inside the sheet metal).
4. Dimensions are symmetrical unless otherwise stated.
Z Axis Clearances
4.76in 121mm
2.5in 64mm
Notes:
1. The low-provile tables are 3 in(76mm) lower than the standard table.
2. P-COOL dimension varies based on P-COOL position.
3. Refer to the page on Tool Changer Dimensions for tool changer heights.
Machine Layout Drawing VF-3 Table Dimensions
Page 3 of 4
August, 2018
Table Dimensions
48in 1219mm 5.250in 133.35mm
3.15in 80mm
A
18.378in 466.80mm B
(Usable Table Size)
4.532in 115.11mm
0.640in
10.425in 264.80mm
3.15in 80mm
0.630in 16mm
1.060in
0.420in 10.67mm
3.937in 100mm
DETAIL A DETAIL B
2.000in
Inch Low-Profile Table Dimensions 3.150in
2.700in
3.937in
D
C DETAIL D
2.750in 1.018in
3.150in 4.500in
10.425in 22.965in
4.532in 2.250in
18.000in 1/2-13 UNC-2B x 1.0
DETAIL C
48.000in
DETAIL E
F H DETAIL G
100mm 25.84mm
100mm 114.30mm
532.51mm
264.80mm
115.11mm 57.15mm
457.20mm
26in 662mm
20.75in 527.1mm
9.24in 234.8mm
23in 584mm
21.75in 552.5mm
The Umbrella Tool Changer moves in
towards the spindle to do a tool change.
Note:
The Umbrella Tool Changer moves in
towards the spindle to do a tool change.