Raptor 600 Cone Crushers
Raptor 600 Cone Crushers
Raptor 600 Cone Crushers
(in) (mm)
All dimensions are for reference only and are not to be used for construction.
Capacity chart
Setting mt/hr/ mt/hr Settings stph stph
mm Min Max Inches Min Max
As indicated above for 100 lbs. per cubic foot and impact work index of 13.
Short tons per hour based on open circuit crushing with material weighing 100 pounds
per cubic foot. Values are estimated “instantaneous” product samples, actual values may
vary ±15%. Factors that will vary throughput are; feed gradation, cavity level, feed distri-
bution, moisture content, and properties of the processed material.
3
General arrangement
All dimensions are for reference only and are not to be used for construction
3/4” (19 mm) 100 93-98 86-92 79-85 65-71 54-60 34-40 27-33 19-25
1/2” (13 mm) 89-95 75-81 63-69 52-58 40-46 33-39 19-25 15-21 11-17
3/8” (10 mm) 78-84 63-69 52-58 42-48 31-37 37-33 15-21 12-18 9-14
1/4” (6 mm) 52-58 40-46 33-39 26-32 19-25 16-21 9-15 6-12 4-11
Values listed will vary depending on feed distribution, cavity level, feed gradation, crushing chamber, moisture and material density.
Feed Openings
Minimum closed side Feed size “B” at min.
setting “A” CSS “A”
Lifting Weights
(lbs.) (kg)
1
3
Complete Crusher 143,227 64,967
Bowl Assembly
37,743 17,120 12 23 5
(includes bowl liner and hopper assembly)
7
Adjustment Ring (includes clamping ring) 20,060 9,099 11
15
Head Assembly 8 9
17,581 7,975
(feed plate assembly and mantle)
10
Countershaft Box Assembly 3,795 1,721 16
6
Eccentric Assembly (includes counterweight) 9,888 4,485 18
14 17
Mantle 7,818 3,546
19 24
Bowl Liner 10,030 4,550
20
Power Unit
13 21
Dry 2,150 975
22
Wet 3,045 1,381
Lube-Air
Wet 8,250 3,742 1. Hopper Assembly 9. Bowl Liner 17. Main Shaft
2. Bowl 10. Socket Liner 18. Eccentric
Lube-Water
3. Adjustment Cap 11. Adjustment Ring 19. Counterweight
Dry 5,800 2,631 4. Drive Ring 12. Clamping Cylinder 20. Gear
Wet 8,550 3,878 5. Feed Plate Assembly 13. Main Frame 21. Countershaft
6. Head Assembly 14. Main Frame Liner 22. Pinion
Air Cooler 2,300 1,043
7. Torch Ring 15. Main Frame Seat Liner 23. Wedge
8. Mantle 16. Tramp Release Cylinder 24. Arm Guard
NOTE: Allowable casting weights vary ±5%
Rev. 11/11/2013 al-us
Copyright © 2013 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or
warranties (express or implied), and information and data contained in this brochure are for general reference only and may change at any time. www.flsmidth.com
Minerals Processing
Tech;nology Center
FLSmidth Salt Lake City, Inc.
7158 S. FLSmidth Dr.
Midvale, UT 84047-5559
USA
Tel: +1 801 871 7000
Fax: +1 801 871 7001
Email: info.slc@flsmidth.com