Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 162 views

    Indoor Voltage Transformers: TJP 5.0-F

    Uploaded by

    Ebrahim Arzani
    The document provides information on the TJP 5.0-F indoor voltage transformer. It has a highest voltage rating of 12-17.5 kV, power frequency test voltage of 28-38 kV, and lightning impulse test voltage of 75-95 kV. It has fuse ratings of 2-6.3 A and maximum rated burdens of 25/0.2 to 100/1 VA/class. The transformer is cast in epoxy resin and has two secondary windings, one for measuring or protection and the other for open-delta connection. It conforms to standards including IEC, VDE, ANSI, BS, GOST and CSN.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Indoor Voltage Transformers: TJP 5.0-F

    Uploaded by

    Ebrahim Arzani
    162 views2 pages
    The document provides information on the TJP 5.0-F indoor voltage transformer. It has a highest voltage rating of 12-17.5 kV, power frequency test voltage of 28-38 kV, and lightning impulse test voltage of 75-95 kV. It has fuse ratings of 2-6.3 A and maximum rated burdens of 25/0.2 to 100/1 VA/class. The transformer is cast in epoxy resin and has two secondary windings, one for measuring or protection and the other for open-delta connection. It conforms to standards including IEC, VDE, ANSI, BS, GOST and CSN.

    Original Description:

    Original Title

    TJP 5.0-F_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on the TJP 5.0-F indoor voltage transformer. It has a highest voltage rating of 12-17.5 kV, power frequency test voltage of 28-38 kV, and lightning impulse test voltage of 75-95 kV. It has fuse ratings of 2-6.3 A and maximum rated burdens of 25/0.2 to 100/1 VA/class. The transformer is cast in epoxy resin and has two secondary windings, one for measuring or protection and the other for open-delta connection. It conforms to standards including IEC, VDE, ANSI, BS, GOST and CSN.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    162 views2 pages

    Indoor Voltage Transformers: TJP 5.0-F

    Uploaded by

    Ebrahim Arzani
    The document provides information on the TJP 5.0-F indoor voltage transformer. It has a highest voltage rating of 12-17.5 kV, power frequency test voltage of 28-38 kV, and lightning impulse test voltage of 75-95 kV. It has fuse ratings of 2-6.3 A and maximum rated burdens of 25/0.2 to 100/1 VA/class. The transformer is cast in epoxy resin and has two secondary windings, one for measuring or protection and the other for open-delta connection. It conforms to standards including IEC, VDE, ANSI, BS, GOST and CSN.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Medium Voltage Product

    TJP 5.0-F
    Indoor voltage transformers

    Highest voltage for equipment [kV] 12 - 17,5


    Power frequency test voltage, 1 min. [kV] 28 - 38
    Lightning impulse test voltage [kV] 75 - 95
    Fuse: 2 or 6,3 A(IEC)
    Max. rated burden, classes [VA/cl] 25/0.2 - 50/0.5 - 100/1
    Residual winding [VA/cl] 50 - 200/6P

    Description
    The TJP 5.0-F epoxi insulated voltage transformers are cast in Rated primary voltages ... 10/V3 kV; 11/V3 kV; 13,8/V3 kV;
    epoxi resin and designed mostly for insulation voltages of 12 15/V3 kV.
    kV to 17,5 kV. Other primary voltages can also be supplied on request.
    If no a different value is required the transformers are Rated secondary voltages... 100/V3 V; 110/V3 V – accuracy
    manufactured with a overvoltage factor of 1.9 x Un/8 hrs. One classes 0.2; 0.5; 1 (measuring winding) or 3P; 6P
    outlet of the primary winding, including the respective terminal (protection winding).
    is insulated from the earth to a level which corresponds to the Other secondary voltages can also be supplied on request.
    rated insulation value. The other outlet of primary winding with Rated voltages for open-delta connection: ... 100/3 V;
    its terminal is earthed during the operation. Most of the 110/3 V- class 6P.
    transformers are equipped with two secondary windings, the Other voltages for open-delta connection can also be
    frst one for either measuring or protection purposes, the other supplied based on customer requirement. Rated frequency
    for being connected into an open-delta connection in a ... 50 Hz; 60 Hz.
    three-phase system. One terminal of each secondary winding Based on a discussion with the manufacturer the
    and one of the open-delta connected terminals have to be transformer can also be provided with primary winding
    earthed during the transformer operation.The secondary designed for two different primary voltages (with secondary
    windings are lead out into a cast-type secondary terminal side changeover).The transformers are manufactured
    board. conformably to the requirements and recommendations of
    The secondary terminal board is covered with a sealed plastic the following standards and regulations: IEC, VDE, ANSI,
    over. The transformer can be mounted in any position. The BS, GOST and CSN.
    transformer body is fixed by four screws, the bolted M8
    earthing clamp is located on the transformer base plate. The
    TJP 5.0-F transformer is equipped with a fuse conformably to
    IEC standard.

    The design of TJP 5.0-F is suitable for AIS panels (see HV


    terminal and the position of the secondary terminals)
    and the replacement of the fuse can be done from the front
    (HV terminal) or after removing the upper part of the
    fuseholder – see „fuse replacement instruction“. There are two
    options for the fuseholder position : above secondary terminal
    box
    (suitable for ABB AIS, drawing number 1VL4200354R0101) or
    on the opposite side (drawing number 1VL4200355R0101).
    Dimensions

    1VLC000522, Rev.1, en 2011. 02.15


    Marking of the voltage transformer outlets

    a) b) c) d) e)

    a) Single-pole insulated transformer b) Double-pole insulated transformer with a tap c) Single-pole insulated transformer with two secondary windings d) insulated transformer with two
    secondary windings, with one of which being the auxiliary (residual) winding e) Single-pole insulated transformer with two secondary, tapped windings, with one which being the
    auxiliary (residual) winding.

    ABB s.r.o.
    PPMV Brno
    Videnska 117
    619 00 Brno, Czech Republic The data and ilustrations in this catalogue are not
    binding. We reserve the right to make changes of the
    Tel.: +420 547 152 602 content, in the course of technical development of the
    +420 547 152 614 product.

    Fax: +420 547 152 626


    E-mail: info.ejf@cz.abb.com

    www.abb.com

    You might also like