This document provides instructions for acquiring, storing, and downloading electrocardiogram (ECG) results from the MAC 600 ECG system. To acquire an ECG, connect the patient lead, power on the device, enter patient details, and press the ECG acquisition button. The ECG can then be stored to an SD card by pressing F3. Downloading involves locating the SD card, connecting it to a computer, opening the patient's record, and using software to upload the ECGs. Additional instructions describe how to delete files from the SD card using file manager on the MAC 600 device.
This document provides instructions for acquiring, storing, and downloading electrocardiogram (ECG) results from the MAC 600 ECG system. To acquire an ECG, connect the patient lead, power on the device, enter patient details, and press the ECG acquisition button. The ECG can then be stored to an SD card by pressing F3. Downloading involves locating the SD card, connecting it to a computer, opening the patient's record, and using software to upload the ECGs. Additional instructions describe how to delete files from the SD card using file manager on the MAC 600 device.
This document provides instructions for acquiring, storing, and downloading electrocardiogram (ECG) results from the MAC 600 ECG system. To acquire an ECG, connect the patient lead, power on the device, enter patient details, and press the ECG acquisition button. The ECG can then be stored to an SD card by pressing F3. Downloading involves locating the SD card, connecting it to a computer, opening the patient's record, and using software to upload the ECGs. Additional instructions describe how to delete files from the SD card using file manager on the MAC 600 device.
This document provides instructions for acquiring, storing, and downloading electrocardiogram (ECG) results from the MAC 600 ECG system. To acquire an ECG, connect the patient lead, power on the device, enter patient details, and press the ECG acquisition button. The ECG can then be stored to an SD card by pressing F3. Downloading involves locating the SD card, connecting it to a computer, opening the patient's record, and using software to upload the ECGs. Additional instructions describe how to delete files from the SD card using file manager on the MAC 600 device.
and arrow pad. To confirm the details, press the white circle which is located in the centre of the arrow pad. Note: The Patient ID for EMIS Clinical Systems is the patient’s EMIS
4 Number. For the TPP SystmOne and InPS Vision clinical systems the Patient ID is the patient’s NHS/CHI Number. To check the quality of your ECG, use the trace indicator which is located in the top right of the screen. Note: Green symbolises good connectivity with the patient.
5 Orange and Red indicates interference and/or possible lead
disconnections.
To capture your ECG trace press
6 the ‘ECG acquisition’ button.
If the captured ECG meets your
requirements, press the ‘F3’ button to store the ECG to the SD card. 7 Note: If you would like a print out of your ECG, press the ‘F1’ button after completing the storage process. If you would like to recapture your ECG you can press the ‘F4’ button.
Power off the system and remove
8 the lead wires from the patient. DOWNLOADING THE RESULTS
Locate and remove the
SD card that is plugged 1 into the back of the MAC 600 ECG system.
Connect the card reader to your PC (if it is not
2 already connected) and place the SD card into the corresponding slot.
Open the patient’s medical record in your
clinical system. 3 Note: InPS Vision hosted and AEROS sites must ensure that Numed Enterprise Link software is running on the remote desktop.
Double click the I3 icon, this is usually found
4 on your taskbar or desktop. This will launch the I3 software.
5 Click the ‘Start’ button.
Select ‘ECG’ from the product selection screen – if you have 6 more than one ECG system you may need to select ‘MAC PDF filer’.
If requested, confirm the
7 patient’s details are correct then click ‘Yes’.
You will then be presented
with a list of ECGs that are ready to be uploaded to the patient’s medical record. ECGs that match the 8 currently selected patient within the clinical system will be automatically selected. Note: Batch processing (more than one ECG) is only available for EMIS and InPS clinical system users.
Selected items will be automatically transferred.
If you do not wish to upload a particular ECG, 9 deselect the item you wish to exclude. When you are ready transfer the results click ‘Send’. A confirmation message will be displayed when the ECG(s) have been 10 successfully uploaded to the patient’s medical record. Click ‘OK’ to complete the process.
ADDITIONAL: HOW TO DELETE
THE CONTENTS OF YOUR SD CARD
1 Power on the MAC 600 ECG system.
+ Access File Manager by 2 pressing ‘F4’ for More and then ‘F3’ for File Manager.
Once File Manager
3 has loaded, press ‘F2’ to select all ECGs. Press ‘F4’ to access 4 more options and then ‘F1’ to delete. + You will be prompted to enter your system password. Use the keypad to enter your 5 password and then submit using the white circle in the middle of the arrow pad. Note: The default password is ‘1111’.
You will receive a
final warning message, press ‘F2’ to accept 6 this. This has now deleted the contents of your SD card.
If you experience any problems using the
MAC 600 ECG System, please contact our technical support team on: 0114 399 0010 or visit: www.numed.co.uk/support SUPPLY | INSTALLATION | TR AINING | SUPPOR T
