Datasheet PDF

2 Ultra-Low-Power MSP430™ Microcontrollers
MSP430™ Microcontrollers
MSP430 Microcontrollers (MCUs) from Texas Instruments (TI) are

Key Features
16-bit, RISC-based, mixed-signal processors designed specifically for
ultra-low-power. MSP430 MCUs have the right mix of intelligent peripherals, • Ultra-low-power (ULP) architecture and flexible clock system
ease-of-use, low cost and lowest power consumption for thousands of extend battery life: 0.1-µA RAM retention, <1-µA RTC mode,
applications – including yours. TI offers robust design support for the <100 µA MHz
MSP430 MCU platform along with technical documents, training, tools and • Integrated intelligent peripherals including a wide range of
software to help designers develop products and release them to market high-performance analog and digital peripherals that off-load
faster. Learn more at www.ti.com/msp430. the CPU
• Easy-to-use 16-bit RISC CPU architecture enables new
applications with industry-leading code density
• Complete development ecosystem with tools starting at $4.30
• Enhanced libraries to benefit several applications such as
capacitive touch, metering metrology, low power design and
debugging
400+ Ultra-Low-Power Devices

8-MHz to 25-MHz CPU Speed
0.5KB to 256KB Flash
128B to 18KB RAM
14 to 113 pins; 25+ packages
MSP430 Microcontroller DNA
Ultra-Low Power Sub-Main Clock (SMCLK) – Source for faster individual peripheral
The MSP430 MCU is designed specifically for ultra-low-power applications. modules that may be driven by the internal DCO up to 25 MHz or with
Its flexible clocking system, multiple low-power modes, instant wakeup external crystal.
and intelligent autonomous peripherals enable true ultra-low-power
optimization, dramatically extending battery life. Instant Wakeup – The MSP430 MCU can wake-up instantly from
LPMs. This ultra-fast wake-up is enabled by the MSP430 MCU’s
Flexible Clocking System – The MSP430 MCU clock system has the internal digitally controlled oscillator (DCO), which can source up to
ability to enable and disable various clocks and oscillators which allow the 25 MHz and be active and stable in 1µs. Instant wake-up functionality
device to enter various low-power modes (LPMs). The flexible clocking is important in ultra-low-power applications since it allows the
system optimizes overall current consumption by only enabling the required microcontroller to use the CPU in very efficient bursts and spend more
clocks when appropriate. time in LPMs.
Multiple-Oscillator Clock System Zero-Power Brown-Out Reset (BOR) – The MSP430 MCU’s BOR is
always enabled and active in all modes of operation. This ensures
Very Low-Power
Oscillator (VLO) the most reliable performance possible while maintaining ultra-low-
up to 20 kHz ACLK-32 kHz power consumption. The BOR circuit detects low supply voltages and
32.768 kHz resets the device when power is applied or removed. This functionality is
Lower-Power Peripherals
especially critical in battery-powered applications.
Control MCLK 100 kHz-25 MHz
Digitally
Controlled
Oscillator CPU and Peripherals
Main Clock (MCLK) – CPU source that may be driven by the internal
Digitally Controlled Oscillator (DCO) up to 25 MHz or with external crystal.
Auxiliary Clock (ACLK) – Source for individual peripheral modules t
driven by the internal low-power oscillator or external crystal.
Ultra-fast 1-µs DCO start-up allows MSP430-based systems to remain in low-power
modes for the longest possible interval – extending battery life. The DCO is fully user
programmable.
www.ti.com/msp430 Ultra-Low Power is in our DNA

The World’s Lowest Power Microcontrollers 3
MSP430™ Microcontroller DNA
Highly Integrated Easy to Get Started

MSP430 MCUs are highly integrated and offer a wide range of high- MSP430 MCUs are easy-to-use because of a modern 16-bit RISC
performance analog and digital peripherals. architecture and a simple development ecosystem.
Intelligent Peripherals 16-Bit Orthogonal Architecture
The MSP430 MCUs peripherals have been designed to assure maximum The MSP430 MCU’s 16-bit architecture provides the flexibility of 16
functionality and provide system-level interrupts, resets and bus arbitration fully-addressable, single-cycle, 16-bit CPU registers with the power of a
at the lowest power. Many peripherals may function autonomously, RISC. The modern design of the CPU offers versatility using only 27
thereby minimizing CPU time spent in active mode. easy-to-understand instructions and seven consistent addressing modes.
High-Performance Integration
The 400+ MSP430 devices offer high-performance integration including Clock ACLK
System Flash/FRAM RAM Port
USB, RF, LCD controllers and Sigma-Delta ADCs. The scalable portfolio
SMCLK
allows designers to find the appropriate MSP430 device for many low- MCLK
MAB
power applications. The MSP430 MCU’s high integration also enables
JTAG/Debug
solutions with smaller physical footprints and minimizes the overall bill RISC CPU
16-Bit MDB
of materials.
Snapshot of Integrated Peripherals
Analog Digital
Watchdog
• ADC10 • Timers • USB Peripheral Peripheral
• ADC12 • Watchdog timer (WDT) • SPI
• SD16 • RTC • I2C Complete Development Ecosystem
• SD24 • PMM • UART The MSP430 development environment is affordable, seamless and
• Comparator • Brownout reset (BOR) • LIN/IrDA easy-to-use. Get started with the $4.30 MSP430 Value Line LaunchPad
• DAC12 • SVS • SCAN_IF development kit, or use the adaptable MSP-FET430UIF that supports
• DMA • RF Front End • ESP430 development on all MSP430 devices. Also, download free IDE options
• Multiplier • A-POOL • LCD such as TI’s Code Composer Studio™ IDE, IAR Embedded Workbench
• OpAmp • AES • Capacitive Touch or the open-source MSPGCC. MSP430Ware is also available, which is a
complete collection of all MSP430 MCU related design resources.
RAM Retention
Self Wakeup
CPU (MCLK)
SMCLK
Operating
ACLK
BOR
Description Interrupt Sources

Mode
Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.

Active CPU, all clocks and peripherals available. l l l l l
Interrupt, RTC, serial communications, other peripherals
Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.
LPM0 CPU is shutdown, peripheral clocks available. l l l l l
Interrupt, RTC, serial communications, other peripherals
CPU is shutdown, peripheral clocks available. DCO Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.
LPM1 l l l l l
is disabled and the DC generator can be disabled. Interrupt, RTC, serial communications, other peripherals
CPU is shutdown, only one peripheral clock Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.
LPM2 l l l l
available. DC generator is enabled. Interrupt, RTC, serial communications, other peripherals
CPU is shutdown, only one peripheral Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.
LPM3 l l l l
clock available. DC generator is disabled. Interrupt, RTC, serial communications, other peripherals
No RAM retention, RTC can be enabled.
LPM3.5 l l Ext. Interrupt, RTC
(MSP430F5xx generation only)
LPM4 CPU is shutdown and all clocks disabled. l l Ext. Interrupt
No RAM retention, RTC disabled.

LPM4.5 l Ext. Interrupt
(MSP430F5xx generation only)
Join our online community at www.ti.com/e2e-mcu

Why Choose an MSP430™ Microcontroller?

Ultra-Low Power FRAM
The MSP430 MCU is designed specifically for TI is always pushing forward with unique new
ultra-low-power applications. Its flexible clocking technologies to decrease power consumption and
system, multiple low-power modes, instant wakeup increase ease-of-use. To those ends we introduce
and intelligent autonomous peripherals enable true Ferroelectric Random Access Memory (FRAM).
ultra-low-power optimization, dramatically extend- FRAM is a universal, non-volatile memory that
ing battery life. combines the speed, endurance and flexibility
of RAM with the stability and reliability of Flash
all in one unified section of memory, while de-
creasing power consumption.
Multiple Package Options Easy-to-Use Software Low-Cost Options

The MSP430 family offers over 25 packages to best The MSP430 family is supported by a complete The new MSP430 Value Line series offers ULP
fit end-equipment needs and to facilitate manu- and easy software development ecosystem. Free and 16-bit performance for low-cost, lower-end
facturing. For today’s increasing need for minia- software development environments are available applications. Ideal for high-volume/low-cost
turization, MSP430 also supports many devices from TI’s Code Composer Studio™ IDE, IAR Embed- designs, these MCUs are priced as low as 25 cents.
in bare die and die-sized BGA (DSBGA) packages as ded Workbench or the open-source MSPGCC. The Start developing on MSP430 Value Line devices
small as 3x3 mm. brand new MSP430Ware is also available, which using the $4.30 LaunchPad development kit.
is a complete collection of all MSP430-related de-
sign resources. MSP430 MCUs also have periph-
eral configuration tools, easy-to-use APIs and other
software tools to get you to market faster.
Ultra-Low Power Performance — Analog Integration — Easy-to-Use

MSP430™ BOR BOR BOR BOR BOR
16-bit RISC CPU L092 DAC8 G2xxx ADC10 F4xx LCD F5xx/6xx PMM
SVS CC430 SVS
PMM
All devices feature: 0.9V-1.65V Comp Speed: 16 MHz Comp Speed: 8/16 MHz ADC10,12 Speed: 25 MHz SVM Speed: 20 MHz SVM
• 16-bit timers Speed: 4 MHz Flash: 0.5-16Kb Flash: 4-120Kb Flash: 8-256Kb Flash: 8-16Kb
• Watchdog timer ROM: Up to 2Kb SVS RAM: Up to 512b Temp RAM: Up to 8Kb SD16 RAM: Up to 18Kb LDO RAM: Up to 4Kb LDO
• Internal Digitally RAM: Up to 2Kb BOR GPIO: 10-24 GPIO: 14-80 Comp GPIO: 32-83 GPIO: 40
USCI MPY MPY
Controlled Oscillator GPIO: 11
• External WDT UART DAC12 USCI USCI
crystal support Cap sense
A-POOL DMA
MPY DMA DMA
• <50 nA pin leakage I/Os
• <6 µs wakeup ADC8 OpAmp Sub 1 GHz
BOR MPY USB RF
SVS BOR ADC10,12 SVS
OpAmp ADC10 AES
PMM
SVM ADC10, 12 SD16 USART

SVS Comp Comp
FRAM LDO F1xx Comp F2xx Comp USCI
USART RTC RTC
Speed 24 MHz Speed: 8 MHz Speed: 16 MHz
ADC10 DAC12 Flash: 1-120Kb DAC12 USCI
ESP430 WDT ADC12
FRAM 4-16kB Flash: 1-60Kb
GPIO 14-28 ADC12 RAM: Up to 10Kb DMA RAM: Up to 8Kb SIF
ESP430 LCD LCD
DMA
Non-volatile GPIO: 14-48 GPIO: 10-64
USCI MPY Basic
SCAN_IF SD24
memory MPY Timer
DMA SVS Basic
WDT+
OpAmp Timer
USART SVS RTC_C
WDT+
USCI RTC
Some Devices All Devices USI

Key Applications
Metering Portable Medical Data Logging

The MSP430™ MCU’s ultra-low power and The MSP430 MCUs integrated analog signal The speed, flexibility and endurance of new
analog integration are ideal for metering appli- chain and ultra-low-power performance is FRAM MSP430 devices with the intelligent
cations. The portfolio offers devices preconfig- perfect for many medical applications, espe- analog and flexible clocking of the MSP430
ured to support single- to three-phase electricity cially portable measurement devices. Also, the MCU produce an ideal platform for data logging
metering, while others are integrated with special competitive cost of designing with an MSP430 applications like structural monitoring, secure
scan peripherals for flow metering applications. MCU enables availability of care to more people access and building automation.
around the world.
www.ti.com/430metering www.ti.com/430medical www.ti.com/fram
Wireless Communications Capacitive Touch Personal Health and Fitness

The CC430 is a small, cost-efficient, and The MSP430 MCU enables capacitive touch in- Pairing the MSP430 MCU’s small size, ultra-
performance-rich solution that integrates RF terfaces like buttons, wheels or sliders through its low power and integrated analog with RF func-
functionality into the MSP430 MCU. This low- on-chip oscillators and Capacitive Touch Sense tionality enables devices to monitor anything
power wireless processor is ideal for space and IOs without the need for external components. from heart rate, to running speed, to the amount
cost-constrained applications such as remote A free Capactive Touch Software Tool Suite and of air in a scuba tank. The eZ430-Chronos™ de-
sensing applications. low cost hardware tools are available to quickly velopment system in a watch is available to get
develop an application without needing to under- you started.
www.ti.com/cc430
stand the underlying theory. www.ti.com/chronos
www.ti.com/capacitivetouch
Energy Harvesting Motor Control Security and Safety

The MSP430 MCU’s ultra-low-power consump- TI’s integrated communication peripherals and MSP430 MCUs not only have the lowest power
tion and powerful analog and digital interfaces high-performance analog make the MSP430 consumption to enable the longest lasting
can harvest wasted energy from the environ- MCU a great choice for controlling stepper, BLDC, critical devices, but they support features for
ment, making it possible to create self-powered and DC motors in applications like printers, secure applications like JTAG fuses, custom
systems that eliminate the need to replace fans, antennas and toys. programming, intelligent power supply monitor-
batteries. The eZ430-RF2500-SEH is a com- ing, dedicated watchdog timers, LCD, and high-
plete energy harvesting development kit that www.ti.com/motorcontrol performance analog.
is available to get you started.
www.ti.com/430security
www.ti.com/energyharvesting

What’s New with MSP430™ Microcontrollers?
FRAM: The future of embedded memory Industry-leading speed

FRAM, or Ferroelectric Random Access Memory, is a type of non- In addition to lower power performance, FRAM can also maintain
volatile memory that combines the speed, ultra-low power, en- unmatched data throughput for non-volatile data storage.
durance, and flexibility of SRAM with the reliability and stability MSP430 MCUs with embedded FRAM are capable of speeds
of flash to combine program and data into one unified memory up to 2 Megabytes/second ensuring that memory is no longer
space for the lowest power and easiest to use microcontroller the bottleneck of your application.
architecture. www.ti.com/fram
Write Speed
Benefits of Embedded FRAM 2500
Lowest Power
• Industry leading active power consumption 2000 15 MBps
of <100µA/MHz
• 250x less power than Flash writes 1500 FRAM
Flash
• Protected write completion
1000
Power Consumption (µA)
2200 500
12 kBps
0
Flash/EEPROM
FRAM Flash
FRAM
FRAM can write more than 100x faster than flash, while
720 consuming less power!
• FRAM max throughput = 2000kB/s
• Flash max throughput = 12kB/s

Flash/EEPROM FRAM
Virtually unlimited write endurance
Embedded FRAM also offers longevity and endurance that existing
True unified memory
memory technologies cannot match. This increased write endur-
FRAM is the only unified memory in microcontrollers today, that
ance is particularly ideal for data logging, digital rights management,
gives developers the flexibility to designate any section of memory
replacing battery-backed SRAM and other applications.
as program or data memory. This can be changed throughout the
development process to suit the changing needs of the application. • 1015 write cycles for FRAM
This feature allows faster time to market and simplified inventory
management – one single device can be configured into nearly Endurance (writes)
unlimited memory configurations. 1E+15
1E+15
1E+14
Data Program 1E+13
1E+12
1E+11
1E+10
OR 1E+09 FRAM
1E+08 Flash/EEPROM
Data Program 1E+07
1E+06
100000
1E+05
1E+04
1E+03
Up to 16kB of unified FRAM 1E+02
Reconfigurable as program or data memory 1E+01
1E+00
FRAM Flash/EEPROM
What’s New with MSP430™ Microcontrollers?
Ultra-low-power capacitive touch: buttons, Introducing the MSP430 MCU’s first high-
sliders, wheels and proximity resolution Timer D
Enabling the world’s lowest power touch sense capabilities on all MSP430F51x2 expands the ultra-low-power portfolio with 5V
MSP430 MCUs, the capacitive touch portfolio includes hardware tolerant IOs.
and free software to give developers easy-to-use, cost effective
Ideal for capacitive touch, motor control, LED lighting and power
options for microcontroller-based capacitive touch applications,
management applications, the new MS430F51x2 series provides
while still benefitting from the battery-saving features of the
two high-precision timers designed for high-precision measure-
MSP430 MCU. www.ti.com/capacitivetouch
ment and control applications, along with 5V tolerant IOs. Each
MSP430 capacitive touch features: 16-bit precision timer integrates three capture and compare
• Supported by all MSP430 microcontrollers registers and supports high resolution modes running up to
• Ultra-low-power touch buttons down to 1µA 256MHz, equivalent to 4ns resolution.
• Supports buttons, sliders, wheels and proximity sensors
Timer D also includes a dual capture mode reducing loading of
• Free Touch Sense Software Library consuming as little
capture operation by half. In addition, the combining compare
as 1kB
blocks help to control both rising and falling edges of the PWM out-
• Cap Sense I/O module available: No external components
put signal. The Timer-Event-Control-block offers external trigger-
required
ing options as well as internal synchronization of timer instances.
Capacitive Touch Sense Software Library www.ti.com/430timer
The royalty-free MSP430 Capacitive Touch Sense Software Library
Key features:
gives developers the option to add touch sense capabilities to any
• 4ns resolution at 16MHz input clock for PWM output
MSP430 microcontroller consuming as little as 1KB of program
and capture input
memory. The open-source software library eliminates the need to
• Low-power consumption: 40µA/MHz
develop complex touch sensing algorithms and supports various
• Full PWM capability combining buffered CCR registers for
capacitive touch sensors, including buttons, sliders, wheels and
one channel
proximity.
• Synchronization of Timer instances
• 100% SW compatible to existing Timer_B
MSP-EXP430F5529 Experimenter Board is a fully featured USB development

board with sensors, LCD display and a capacitive touch slider.

MSP430™ MCU Software Tools
MSP430 is known for providing the world’s largest ultra-low-power microcontroller portfolio in the industry or in other words,
great hardware. The MSP430 team recognizes that developers also need easy-to-use and powerful software tools to enable high-quality
and differentiated applications. The MSP430 software ecosystem can help developers tap into the ultra-low-power performance and
intelligent peripherals that are integrated in all 400+ MSP430 devices.
MSP430Ware, featuring Driver Library Everything you need to become an MSP430 MCU expert.
Get the latest and greatest MSP430 MCU design Key features:
resources in one place. • MSP430Ware’s content is delivered in a sleek, interactive GUI
MSP430Ware is a collection of code examples, datasheets and other • Automatic updates make sure you have the latest resources

design resources for all MSP430 devices delivered in a convenient
The MSP430Ware package includes:
package; essentially everything you need to become an MSP430 MCU
• Code Examples
expert.
• Documentation
In addition to providing a complete collection of existing resources,
• Easy-to-use APIs and Driver Libraries
MSP430Ware also includes a brand new high-level API called MSP430
Driver Library. This new library makes it easy to talk to MSP430 hard-
ware. As of today, MSP430 Driver Library supports MSP430F5xx and
6xx devices. Learn more about MSP430Ware at
www.ti.com/msp430ware
Integrated Development Environments
Code Composer Studio™ IDE

• Eclipse-based IDE (Compiler, debugger, link, etc) for all TI embedded processors
• Version 5.1 now available. Faster, more efficient and simple user interface
• Unrestricted version available for $495
• Free versions are available as well
– Free 16kB code-limited version available
– Free, full-featured, 120-day trial version also available
IAR Embedded Workbench

• Third-party IDE offering project management tools and code editor
• Includes up-to-date configuration files for all MSP430 devices
• Free versions are available as well
– Free 4/8/16kB code-limited Kickstart version available
– Free, full-featured 30-day trial version available
Open Source MSPGCC and MSPDEBUG

• Free, open source toolchain for MSP430 devices
• Includes the GNU C compiler (GCC), the assembler and
linker and the debugger (GDB)
• Tools can be used on Windows, Linux, BSD and most other versions of Unix
• Learn more at mspgcc.sourceforge.net

MSP430™ MCU Software Tools
The Brand New MSP430 Driver Library Driver

Library
GPIO_setAsPeripheralModuleFunctionOutputPin (PARAMETERS):
Timer_generatePWM(PARAMETERS)
Makes it easy for developers to program MSP430F5xx
and 6xx devices using easy-to-use and well-documented P2DIR 1= 0x04;
TA1CCTL1 = OUTMOD_7;
function calls; all with minimal footprint. Traditional P2SEL 1 = 0x04;
Tap into MSP430 hardware fast and efficiently. Code TA1CCR1 = 38R;
TA1CCRO = 511;
Key features: TA1CTL = TASSEL_1 = MC_1 = TACLR;
• Easy-to-use function calls for enabling, configuring and using peripherals 00101010
including ADCs, DACs, timers, serial communication modules and more Low level 10010010
Programming 01010100
• Supports MSP430F5xx and F6xx devices today 10010010
• Fully documented within a comprehensive API Guide 11001010
• Driver Library and documentation delivered within MSP430Ware

• Royalty-free and open source
Grace™ Software GUI-based I/O and peripheral configuration tool for MSP430F2xx/G2xx devices
Get started quickly with Grace code generation

Grace enables developers to generate easy-to-read, fully commented C code
that enables and configures peripherals quickly, so developers can spend
more time differentiating within the application layer.
Other MSP430 Software Resources Tools Get up and running with MSP430 Software Ecosystem
MSP430 USB MSP430 RF

Developers Package Command line Capacitive Touch Real-Time
Software tools and
(MSC, HID, CDC) programmers Software Libraries Operating Systems
wireless stacks
MSP430 Software Ecosystem

MSP430 offers software solutions and documentation that enable multiple applications such as metering, medical, wireless, energy har-
vesting, capacitive touch and other applications. See the MSP430 Software Ecosystem in its entirety at www.ti.com/msp430software

MSP430™ MCU Hardware Tools

MSP430 is supported by a broad collection of hardware development tools, ranging from low-cost development kits like the $4.30
LaunchPad (MSP-EXP430G2) to highly-integrated, application-specific platforms. MSP430 development kits are carefully put together
to ensure a simple “out-of-box” experience to get users beyond “Hello World” within minutes. In addition to a large selection of
TI-generated development kits, a growing and active third party network is also available. Happy Coding!
LaunchPad and the BoosterPack Ecosystem
Complete Development kit for $4.30!

The MSP-EXP430G2 LaunchPad development kit provides all of the hardware and software needed to start
MSP430 development. LaunchPad supports all MSP430G2xx Value Line MCUs. www.ti.com/launchpad
LaunchPad Features • MSP430G2553: 16kB Flash, 512B RAM, 8ch
• On-board emulation 10-bit ADC, Comparator, Capacitive Touch I/Os,
• 20-pin DIP Socket Universal Serial Communication Module
• 2 on-board LEDs and 2 on-board switches (I2C, UART, SPI)
• Kit includes USB cable, Quick Start Guide,
2x 10-pin male and female headers • MSP430G2452: 8kB Flash, 256B RAM, 8ch
• Includes 2 MSP430 Value Line MCUs 10-bit ADC, Comparator, Capacitive Touch I/Os,
Universal Serial Interface (I2C/SPI)
Growing Ecosystem of BoosterPacks!

BoosterPacks are plug-in modules for the LaunchPad development kit, which enable additional
functionality including wireless, capacitive touch, LED lighting and others. Each BoosterPack in-
cludes hardware, documentation and a pre-programmed MSP430 Value Line device which includes
a demo application. See the complete list of BoosterPacks at www.ti.com/boosterpack
eZ430 Starter Kits

eZ430 kits feature embedded emulation and unique Featuring the eZ430-Chronos™ development tool
form factors. • The world’s first wireless development kit in a sports watch
The eZ430 family of tools feature embedded emulation, allowing the • Integrated with the CC430F6137, an MCU + RF system-on-chip
kit to be the same size as a USB memory stick and communicate • Available in three RF frequencies: 433, 868 & 915MHz
with the target MCU using only 2 pins! • Highly-integrated development platform featuring 3-axis
accelerometer, pressure sensor, temp sensor and 96-segment LCD
• Learn more at www.ti.com/chronoswiki
Part Number Description Picture Price

eZ430-Chronos CC430-based RF wireless development kit in a sports watch (433, 868 & 915MHz) $49
eZ430-F2013 Development kit in USB thumb drive form-factor. Based on MSP430F2013 $20
eZ430-T2012 3x MSP430F2012 target boards that support the eZ430-F2013 emulator $10
eZ430-RF2500 2.4GHz RF development kit based on MSP430F2274. Ideal for those new to wireless $49
eZ430-F2500T Standalone 2.4GHz target board that is also included in the eZ430-RF2500 kit $20
eZ430-RF2500-SEH Solar Energy Harvesting kit featuring 2.4GHz RF and Cymbet’s rechargeable EnerChips $149
eZ430-RF256x Bluetooth kit based on MSP430BT5190 (pre-eZ430-RF256x loaded with Bluetooth stack) and CC2560A $99
eZ430-TMS37157 RFID/Passive Low Frequency kit includes base station, target board and USB emulator $199

MSP430™ MCU Hardware Tools

MSP430 Experimenter’s Boards
Highly integrated development platforms for evaluating MSP430 devices.
Experimenter’s Boards feature selected MSP430 devices and additional hardware components for easy system evaluation and
prototyping. They are the ideal platform for learning a new architecture and testing the capabilities of a device family.
MSP-EXP430F5438 MSP-EXP430FG4618 MSP-EXP430F5529 MSP-EXP430FR5739 MSP-EXP430F6137RFx

Featuring MSP430F5438 Featuring MSP430FG4618 Featuring MSP430F5529 Featuring MSP430FR5739 Featuring CC430F6137 and
on-board dot matrix display, and MSP430F2013 on-board complete USB development on-board emulation, RF CC430F5137 on-board emulation,
joystick, ZIF socket, RF segmented display, buzzer, platform, on-board dot matrix headers, accelerometer, segmented LCD, light sensor, in-
display, JTAG, RF headers, on-
headers, microphone, RS-232, capacitive touch, temperature sensor, first catalog cludes F6137-based motherboard
board emulation, accelerometer,
accelerometer, JTAG microphone, RF headers, JTAG microSD, capacitive touch MCU with embedded FRAM and F5137-based satellite board
Price: $149 Price: $149 Price: $149 Price: $29 Price: $149
Preview products are listed in blue.
Target Boards and Flash Emulation Tools
One tool to rule them all. Debugging and Programming Tools

Part Number PC Port Price
The MSP430 Flash Emulation Tool (MSP-FET430UIF) supports all MSP-FET430UIF (recommended) USB $99
MSP430 devices when paired with the appropriate target board. MSP-FET430PIF Parallel $20
Target Boards are available for all MSP430 devices and are fit- Production Programmer
ted with ZIF target sockets for interfacing with various package Part Number PC Port Provider Price
types and pinouts. The boards provide direct access to all port MSP-GANG (recommended) Serial/USB TI $249
MSP-GANG430 Serial TI $199
pins and include an on-board JTAG connector.
GangPro430 USB Elprotronic $339
A Flash Emulation Tool is required to interface each target board
with a PC. The target boards (~$75) and Flash Emulation Tool MSP-FET430UIF
Bundle available
(~$99) can be purchased separately, or as a bundle (~$149). MSP-FET430U64
MSP-TS430PM64
Socket Pin Count Package Supported FET + TS Bundle Target Board Only Supported Devices
8 D (SOIC) MSP-FET430U8 MSP-TS430D8 G2xx0
PW (TSSOP) MSP-FET430U14 MSP-TS430PW14 F20xx G2xx1
14
PW (TSSOP) MSP-FET430U092 MSP-TS430L092 L092
24 PW (TSSOP) MSP-FET430U24 MSP-TS430PW24 AFE2xx
DW (TSSOP) -- MSP-TS430DW28 F12x F12x2
28 PW (TSSOP) MSP-FET430U28 MSP-TS430PW28 F11x1 F11x2 F12x F12x2 F21xx
PW (TSSOP) MSP-FET430U28A MSP-TS430PW28A F20xx G2xx1 G2xx2 G2xx3
38 DA (TSSOP) MSP-FET430U38 MSP-TS430DA38 F22x2 F22x4
RHA (QFN) MSP-FET430U40A MSP-TS430RHA40A FR572x FR573x
40 RHA (QFN) MSP-FET430U23x0 MSP-TS430QFN23x0 F23x0
RSB (QFN) MSP-FET430U40 MSP-TS430RSB40 F51x1 F51x2
DL (SSOP) MSP-FET430U48 MSP-TS430DL48 F42x0 FG42x0
48
RGZ (QFN) MSP-FET430U48B MSP-TS430RGZ48B F534x
F13x F13x1 F14x F14x1 F15x F16x F23x F24x F2410
PM (QFP) MSP-FET430U64 MSP-TS430PM64
F24x1 F241x F261x F41x F42x FE42x FE42x2 FW42x
PM (QFP) MSP-FET430U64A MSP-TS430PM64A F41x2
64 RGC (QFN) MSP-FET430U64B MSP-TS430PM64B F530x F5310
RGC (QFN) MSP-FET430U64C MSP-TS430PM64C F522x
RGC (QFN) FET430F6137RF900 EM430F6137RF900 CC430F6137
RGC (QFN) MSP-FET430U64USB MSP-TS430RGC64USB F552x F551x F55x0
PN (QFP) MSP-FET430U80 MSP-TS430PN80 F241x F261x F43x F43x1 FG43x F47x FG47x
80 PN (LQFP) MSP-FET430U80A MSP-TS430PN80A F532x
PN (LQFP) MSP-FET430U80USB MSP-TS430PN80USB F552X F551x
PZ (QFP) MSP-FET430U100 MSP-TS430PZ100 F43x F43x1 F44x FG461x F47xx F461x
PZ (QFP) MSP-FET430U100A MSP-TS430PZ100A F471xx
PZ (QFP) MSP-FET430U100B MSP-TS430PZ100B F673x F672x
100
PZ (QFP) MSP-FET430U100C MSP-TS430PZ100C F643x F533x
PZ (QFP) MSP-FET430U5x100 MSP-TS430PZ5x100 F54xx
PZ (QFP) MSP-FET430U100USB MSP-TS430PZ100USB F56xx F663x

Application-Specific MSP430 Devices

16-Bit Timers
Part Flash SRAM Related 1 ku
Application Number (KB) (KB) Total A* B* ADC Additional Features Devices Package(s) Price1
Low Voltage (0.9V) MSP430l092 — 2 2 2 — ADC8 DAC8, COMP, SVS, Temp sensor, 11 I/Os, ROM-version available — 14PW $1.00
Low Voltage (1.1V) MSP430L110 — 14kB + 512B 2 2 — ADC8 DAC8, COMP, SVS, Temp sensor, 21 I/Os, ROM-version available (as MSP430C110) — 14PW $0.80
MindTree’s Ethermind Bluetooth stack and Serial Port Profile 100PZ,
Bluetooth MSP430BT5190 256 16 3 5, 3 7 16ch ADC12_A available for download. Not preloaded by default. CC2560 $4.95
113ZQW
Fixed-Function, Qi-certified software for contactless power applications (Receiver). BQ25046,
Contactless Power MSP430BQ1010 — — — — — — Compliant with the Wireless Power Consortium. Comes pre-loaded by default. — $1.80
BQ500110
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer.
MSP430F1xx Series – Up to 8 MHz

Timers
Flash SRAM I/O USART Temp ADC Additional 1 ku

Series Part Number (KB) (B) (max) Total A* B* Watchdog BOR SVS (UART/SPI) DMA MPY Comp_A Sensor Ch/Res Features Package(s) Price1
MSP430F1101A 1 128 14 1 3 — l — — — — — l — Slope — 20DGV, DW, PW; 24RGE $1.00
F11x1

MSP430F1122 4 256 14 1 3 — l l — — — — — l 5ch, ADC10 — 20DW, PW; 32RHB $2.00
F11x2
MSP430F1132 8 256 14 1 3 — l l — — — — — l 5ch, ADC10 — 20DW, PW; 32RHB $2.25

MSP430F122 4 256 22 1 3 — l — — 1 — — l — Slope — 28DW, PW; 32RHB $2.15
F12x
MSP430F123 8 256 22 1 3 — l — — 1 — — l — Slope — 28DW, PW; 32RHB $2.30

MSP430F1222 4 256 22 1 3 — l l — 1 — — — l 8ch, ADC10 — 28DW, PW; 32RHB $2.40
F12x2
MSP430F1232 8 256 22 1 3 — l l — 1 — — — l 8ch, ADC10 — 28DW, PW; 32RHB $2.50

MSP430F133 8 256 48 2 3 3 l — — 1 — — l l 8ch, ADC12 — 64PM, PAG, RTD $3.00
F13x
MSP430F135 16 512 48 2 3 3 l — — 1 — — l l 8ch, ADC12 — 64PM, PAG, RTD $3.60

MSP430F1331 8 256 48 2 3 3 l — — 1 — — l — Slope — 64PM, R TD $2.00
F13x1
MSP430F1351 16 512 48 2 3 3 l — — 1 — — l — Slope — 64PM, RTD $2.30

MSP430F147 32 1024 48 2 3 7 l — — 2 — 16x16 l l 8ch, ADC12 — 64PM, PAG, RTD $5.05
F14x
MSP430F1471 32 1024 48 2 3 7 l — — 2 — 16x16 l — Slope — 64PM, RTD $4.60

MSP430F155 16 512 48 2 3 3 l l l 1 with I2C l — l l 8ch, ADC12 (2) DAC12 64PM, RTD $4.95
F15x
MSP430F167 32 1024 48 2 3 7 l l l 2 with I2C l 16x16 l l 8ch, ADC12 (2) DAC12 64PM, RTD $6.75
F16x
MSP430G2xx Series – Up to 16 MHz

Timers USCI:
Flash SRAM I/O USI: I2C/SPI/ Temp ADC Additional 1ku
Series Part Number (KB) (B) (max) Total A
*
Watchdog BOR I2C/SPI UART Comp_A+ Sensor Ch/Res Features Packages Price1
MSP430G2001 0.5 128 10 1 2 l l — — — — — — 14PW, N; 16RSA $0.34
MSP430G2101 1 128 10 1 2 l l — — — — — — 14PW, N; 16RSA $0.44
MSP430G2121 1 128 10 1 2 l l l — — — — — 14PW, N; 16RSA $0.46
MSP430G2201 2 128 10 1 2 l l — — — — — — 14PW, N; 16RSA $0.47
G2xx1
MSP430G2221 2 128 10 1 2 l l l — — — — — 14PW, N; 16RSA $0.49

MSP430G2111 1 128 10 1 2 l l — — l — Slope — 14PW, N; 16RSA $0.46
MSP430G2211 2 128 10 1 2 l l — — l — Slope — 14PW, N; 16RSA $0.49
MSP430G2131 1 128 10 1 2 l l l — — l 8ch ADC10 — 14PW, N; 16RSA $0.49
MSP430G2231 2 128 10 1 2 l l l — — l 8ch ADC10 — 14PW, N; 16RSA $0.55
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price for TSSOP package. *Represents number of capture/compare registers per timer.

MSP430G2xx Series – Up to 16 MHz (continued)

Timers USCI:
Flash SRAM I/O USI: I2C/SPI/ Temp ADC Additional 1ku
Series Part Number (KB) (B) (max) Total A*
Watchdog BOR I2C/SPI UART Comp_A+ Sensor Ch/Res Features Packages Price1
MSP430G2102 1 256 16 1 3 l l l — — — — Cap touch I/O 14PW; 20PW, N; 16RSA $0.48
MSP430G2112 1 256 16 1 3 l l l — l — Slope Cap touch I/O 14PW; 20PW, N; 16RSA $0.49
G2xx2
MSP430G2132 1 256 16 1 3 l l l — — l 8ch ADC10 Cap touch I/O 14PW; 20PW, N; 16RSA $0.55
MSP430G2152 1 256 16 1 3 l l l — l l 8ch ADC10 Cap touch I/O 14PW; 20PW, N; 16RSA $0.55
MSP430G2203 2 256 24 2 3,3 l l — l — — — Cap touch I/O 20PW, N; 28PW; 32RHB $0.60
MSP430G2213 2 256 24 2 3,3 l l — l l — Slope Cap touch I/O 20PW, N; 28PW; 32RHB $0.65
MSP430G2233 2 256 24 2 3,3 l l — l — l 8ch ADC10 Cap touch I/O 20PW, N; 28PW;32RHB $0.65
G2xx3
MSP430G2333 4 256 24 2 3,3 l l — l — l 8ch ADC10 Cap touch I/O 20PW, N; 28PW; 32RHB $0.70
MSP430G2433 8 512 24 2 3,3 l l — l — l 8ch ADC10 Cap touch I/O 20PW, N; 28PW; 32RHB $0.75
MSP430G2533 16 512 24 2 3,3 l l — l — l 8ch ADC10 Cap touch I/O 20PW, N; 28PW;32RHB $0.90
MSP430G2153 1 256 24 2 3,3 l l — l l l 8ch ADC10 Cap touch I/O 20PW, N; 28PW; 32RHB $0.60
MSP430G2453 8 512 24 2 3,3 l l — l l l 8ch ADC10 Cap touch I/O 20PW, N; 28PW;32RHB $0.80
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer. New products are listed in red.

Timers USCI
Ch A:
Flash SRAM I/O USI: UART/LIN/ Ch B: Temp ADC Additional 1 ku
Series Part Number (KB) (B) (max) Total A* B* Watchdog BOR SVS (I2C/SPI) IrDA/SPI I2C/SPI DMA MPY Comp_A+ Sensor Ch/Res Features Package(s) Price1
MSP430F2001 1 128 10 1 2 — l l — — — — — — l — Slope — 14PW, N; 16RSA $0.55
MSP430F2011 2 128 10 1 2 — l l — — — — — — l — Slope — 14PW, N; 16RSA $0.65
MSP430F2002 1 128 10 1 2 — l l — l — — — — — l 8ch, ADC10 — 14PW, N; 16RSA $0.80
F20xx
MSP430F2012 2 128 10 1 2 — l l — l — — — — — l 8ch, ADC10 — 14PW, N; 16RSA $0.95

MSP430F2003 1 128 10 1 2 — l l — l — — — — — l 4ch, SD16_A — 14PW, N; 16RSA $1.20
MSP430F2013 2 128 10 1 2 — l l — l — — — — — l 4ch, SD16_A — 14PW, N; 16RSA $1.35
MSP430F2101 1 128 16 1 3 — l l — — — — — — l — Slope — 20DGV, DW, PW; 24RGE $0.75
F21xx

MSP430F2112 2 256 22 2 3, 2 — l l — — 1 1 — — l l 8ch, ADC10 — 28PW; 32RHB, RTV $1.55
MSP430F2232 8 512 32 2 3 3 l l — — 1 1 — — — l 12ch, ADC10 — 38DA; 40RHA, 49YFF $1.95
F22x2

MSP430F2234 8 512 32 2 3 3 l l — — 1 1 — — — l 12ch, ADC10 (2) OPAMP 38DA; 40RHA, 49YFF $2.15
F22x4
MSP430F2330 8 1024 32 2 3 3 l l — — 1 1 — 16x16 l — Slope — 40RHA; 49YFF $1.85
F23x0

1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer. New products are listed in red.

14 Ultra-Low Power MSP430™ Microcontrollers
MSP430F2xx Series – Up to 16 MHz (continued)

Timers USCI
Ch A:
Flash SRAM I/O USI: UART/LIN/ Ch B: Temp ADC Additional 1 ku
Series Part Number (KB) (B) (max) Total A* B* Watchdog BOR SVS (I2C/SPI) IrDA/SPI I2C/SPI DMA MPY Comp_A+ Sensor Ch/Res Features Package(s) Price1
MSP430F233 8 1024 48 2 3 3 l l l — 1 1 — 16x16 l l 8ch, ADC12 — 64PM, RGC $2.40
F23x

F24x/10

MSP430F2471 32 4096 48 2 3 7 l l l — 2 2 — 16x16 l — Slope — 64PM, RGC $3.70
F24x1
MSP430F2481 48 4096 48 2 3 7 l l l — 2 2 — 16x16 l — Slope — 64PM, RGC $4.25

MSP430F2491 60 2048 48 2 3 7 l l l — 2 2 — 16x16 l — Slope — 64PM, RGCF $4.40
MSP430F2416 92 4096 48/64 2 3 7 l l l — 2 2 — 16x16 l l 8ch, ADC12 — 64PM; 80PN; 113ZQW $5.60
MSP430F2417 92 8192 48/64 2 3 7 — 2 2 — 16x16 8ch, ADC12 — 64PM; 80PN; 113ZQW $6.10
F241x
l l l l l
MSP430F2418 116 8192 48/64 2 3 7 l l l — 2 2 — 16x16 l l 8ch, ADC12 — 64PM; 80PN; 113ZQW $6.40
MSP430F2419 120 4096 48/64 2 3 7 l l l — 2 2 — 16x16 l l 8ch, ADC12 — 64PM; 80PN;113ZQW $6.10
MSP430F2616 92 4096 48/64 2 3 7 l l l — 2 2 l 16x16 l l 8ch, ADC12 (2) DAC12 64PM; 80PN; 113ZQW $7.10
MSP430F2617 92 8192 48/64 2 3 7 — 2 2 16x16 8ch, ADC12 (2) DAC12 64PM; 80PN; 113ZQW $7.60
F261x
l l l l l l
MSP430AFE2xx Series – Up to 12 MHz

Timers
Flash SRAM I/O USART Temp ADC Additional 1 ku
Series Part Number (KB) (B) (max) Total A* B* Watchdog BOR SVS (UART/SPI) MPY Comparator Sensor Ch/Res Features Package(s) Price1
MSP430AFE221 4 256 11 1 3 — l l l l l l l (1) SD24 — 24PW $1.80
MSP430AFE231 8 512 11 1 3 — (1) SD24 — 24PW $1.85
AFE2xx
l l l l l l l
MSP430F4xx Series – Up to 16 MHz with LCD

Timers USCI
Watchdog Ch A: CPU
Flash SRAM I/O and Basic USART UART/LIN/ Ch B: LCD Temp Speed ADC Additional 1 ku
Series Part Number (KB) (B) (max) Total A* B*
Timer BOR SVS (UART/SPI) IrDA/SPI I2C/SPI Segments DMA MPY Comp_A Sensor (MIPS) Ch/Res Features Package(s) Price1
MSP430F412 4 256 48 1 3 — l l l — — — 96 — — l — 8 Slope — 64PM,RTD $2.60
MSP430F413 8 256 48 1 3 — l l l — — — 96 — — l — 8 Slope — 64PM,RTD $2.95
F41x
MSP430F415 16 512 48 2 3, 5 — l l l — — — 96 — — l — 8 Slope — 64PM,RTD $3.40

MSP430F417 32 1024 48 2 3, 5 — l l l — — — 96 — — l — 8 Slope — 64PM,RTD $3.90
MSP430F4132 8 512 56 2 3, 5 — l l l — 1 1 144 — — l l 8 8ch, ADC10 — 48RGZ; 64PM $1.70
F41x2
MSP430F4152 16 512 56 2 3, 5 — l l l — 1 1 144 — — l l 8 8ch, ADC10 — 48RGZ; 64PM $1.90

MSP430F423A 8 256 14 1 3 — l l l 1 — — 128 — 16x16 — l 8 (3) SD16 — 64PM $3.55
F42x
MSP430F425A 16 512 14 1 3 — l l l 1 — — 128 — 16x16 — l 8 (3) SD16 — 64PM $4.05

MSP430F427A 32 1024 14 1 3 — l l l 1 — — 128 — 16x16 — l 8 (3) SD16 — 64PM $4.45
MSP430FW423 8 256 48 2 3, 5 — l l l — — — 96 — — l — 8 Slope SCAN_IF 64PM $2.50
FW42x

MSP430FW428 48 2048 48 2 3,5 — l l l — — — 96 — — l — 8 Slope SCAN_IF 64PM $3.30
MSP430FW429 60 2048 48 2 3,5 — l l l — — — 96 — — l — 8 Slope SCAN_IF 64PM $3.55
MSP430FE423A 8 256 14 1 3 — l l l 1 — — 128 — 16x16 — — 8 (3) SD16 ESP430 64PM $3.90
FE42x
MSP430FE4232 8 256 14 1 3 — l l l 1 — — 128 — 16x16 — — 8 (2) SD16 ESP430 64PM $3.50

MSP430F4250 16 256 32 1 3 — l l — — — — 56 — — — — 8 5ch, SD16_A DAC12 48DL, RGZ $3.10
F42x0


MSP430F4xx Series – Up to 16 MHz with LCD (continued)

Timers USCI
Watchdog Ch A: CPU
Flash SRAM I/O and Basic USART UART/LIN/ Ch B: LCD Comp Temp Speed ADC Additional 1 ku
Series Part Number (KB) (B) (max) Total A* B* 2
Timer BOR SVS (UART/SPI) IrDA/SPI I C/SPI Segments DMA MPY A Sensor (MIPS) Ch/Res Features Package(s) Price1
DAC12,
MSP430FG4250 16 256 32 1 3 — l l — — — — 56 — — — l 8 5ch, SD16_A 48DL, RGZ $3.30
(2) OPAMP
FG42x0
DAC12,
(2) OPAMP
DAC12,
(2) OPAMP
MSP430F435 16 512 48 2 3 3 l l l 1 — — 128/160 — — l l 8 8ch, ADC12 — 80PN; 100PZ $3.40
F43x

MSP430F438 48 2048 48 3 3 3 — l l 1 — — 128 l — l l 8 12ch, ADC12 — 80LQFP $5.40
MSP430F439 60 2048 48 3 3 3 — l l 1 — — 128 l — l l 8 12ch, ADC12 — 80LQFP $5.95
MSP430F4351 16 512 48 2 3 3 l l l 1 — — 128/160 — — l — 8 Slope — 80PN; 100PZ $2.65
F43x1

(2) DAC12,
MSP430FG437 32 1024 48 2 3 3 l l l 1 — — 128 l — l l 8 12ch, ADC12 80PN $3.85
(3) OPAMP
FG43x
(2) DAC12,
(3) OPAMP
(2) DAC12,
(3) OPAMP
MSP430F4481 48 2048 48 2 3 7 l l l 2 — — 160 — 16x16 l — 8 — — 100PZ $4.05
MSP430F4491 60 2048 48 2 3 7 l l l 2 — — 160 — 16x16 l — 8 — — 100PZ $4.40
F44x
MSP430F447 32 1024 48 2 3 7 l l l 2 — — 160 — 16x16 l l 8 8ch, ADC12 — 100PZ $4.05

(2) DAC12,
100PZ;
MSP430FG4616 92 4096 80 2 3 7 l l l 1 1 1 160 l 16x16 l l 8 12ch, ADC12 +RTC $7.45
113ZQW
(3) OPAMP
(2) DAC12,
100PZ;
113ZQW
FG461x
(3) OPAMP
(2) DAC12,
100PZ;
113ZQW
(3) OPAMP
(2) DAC12,
100PZ;
113ZQW
(3) OPAMP
MSP430F46161 92 4096 80 2 3 7 l l l 1 1 1 160 l 16x16 l — 8 — — 100PZ $5.40
MSP430F46171 92 8192 80 2 3 7 l l l 1 1 1 160 l 16x16 l — 8 — — 100PZ $5.80
MSP430F46181 116 8192 80 2 3 7 l l l 1 1 1 160 l 16x16 l — 8 — — 100PZ $6.20
MSP430F46191 120 4096 80 2 3 7 1 1 1 160 16x16 — 8 — — 100PZ $5.80
F461x
l l l l l
MSP430F4616 92 4096 80 2 3 7 l l l 1 1 1 160 l 16x16 l l 8 12ch, ADC12 — 100PZ $6.30
MSP430F4783 48 2048 72 2 3 3 l l l — 2 2 160 — 32x32 l l 16 (3) SD16_A — 100PZ $4.00
MSP430F4793 60 2560 72 2 3 3 — 2 2 160 — 32x32 16 (3) SD16_A — 100PZ $4.30
F47xx
l l l l l
MSP430F47163 92 4096 68 2 3 3 l l l — 2 2 160 l 32x32 l l 16 (3) SD16_A RTC_C 100PZ $5.00
F471xx


MSP430F4xx Series – Up to 16 MHz with LCD (continued)

Timers USCI
Watchdog Ch A: CPU
Flash SRAM and Basic USART UART/LIN/ Ch B: LCD Comp Temp Speed ADC Additional 1 ku
Series Part Number (KB) (B) I/O Total A* B*
Timer BOR SVS (UART/SPI) IrDA/SPI I2C/SPI Segments DMA MPY A Sensor (MIPS) Ch/Res Features Package(s) Price1
MSP430FG477 32 2048 48 2 3 3 l l l — 1 1 128 — — l l 8 (5) SD16_A DAC12, 80PN,113ZQW $5.50
(2) OPAMP
FG47x

(2) OPAMP
2) OPAMP
MSP430F477 32 2048 48 2 3 3 l l l — 1 1 128 — — l l 8 (5) SD16_A DAC12 80PN,113ZQW $4.70
F47x


Timers USCI
PMM: BOR,
Program SRAM I/O Watchdog SVS, SVM, Ch A: UART/ Ch B: Comp Temp ADC Additional 1 ku
Series Part Number (KB) (KB) (max) Total A B Timer LDO LIN/IrDA/SPI I2C/SPI DMA MPY B Sensor Ch/Res DAC Features Package(s) Price1
MSP430F5131 8 1 29 3 3 — l l 1 1 3ch 32x32 l — — — HiRes PWM, 5V I/O's 38DA, 40RSB $1.20
MSP430F5151 16 2 29 3 3 — l l 1 1 3ch 32x32 l — — — HiRes PWM, 5V I/O's 38DA, 40RSB $1.35
MSP430F5171 32 2 29 3 3 — 1 1 3ch 32x32 — — — HiRes PWM, 5V I/O's 38DA, 40RSB $1.60
F51xx
l l l
MSP430F5132 8 1 29 3 3 — l l 1 1 3ch 32x32 l l 8ch ADC10 — HiRes PWM, 5V I/O's 38DA, 40RSB $1.25
MSP430F5304 8 6 31 4 5,3,3 7 l l 1 1 3ch 32x32 l l 8ch ADC10 — — 48RGZ , 48PT $1.55
MSP430F5308 16 6 47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC10 — — 48RGZ, 48PT, $1.65
64RGC, 80ZQE
F53x

64RGC, 80ZQE
64RGC, 80ZQE
MSP430F5324 64 6 48 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 64RGC, 80ZQE $2.10
MSP430F5325 64 6 63 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 80PN $2.20
MSP430F5326 96 8 48 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 64 RGC, 80ZQE $2.45
MSP430F5327 96 8 63 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 80 PN $2.50
MSP430F5328 128 10 48 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 64RGC, 80ZQE $2.55
F532x
MSP430F5329 128 10 63 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — — 80PN $2.60

MSP430F5333 128 10 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch, ADC12A — — 100PZ, 113ZQW $4.90
MSP430F5336 128 18 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch, ADC12A l — 100PZ, 113ZQW $5.65
MSP430F5338 256 18 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch, ADC12A l — 100PZ, 113ZQW $6.26
MSP430F5340 64 6 38 4 5,3,3 7 l l 2 2 3ch 32x32 l l 9ch ADC12A — — 48RGZ $2.15
F534x

MSP430F5418A 128 16 67 3 5,3 7 l l 2 2 3ch 32x32 l l 16ch, ADC12A — — 80PN $3.30
MSP430F5419A 128 16 87 3 5,3 7 l l 4 4 3ch 32x32 l l 16ch, ADC12A — — 100PZ; 113ZQW $3.65
F54xx
MSP430F5436A 192 16 87 3 5,3 7 l l 4 4 3ch 32x32 l l 16ch, ADC12A — — 100PZ; 113ZQW $4.30
MSP430F5438A 256 16 87 3 5,3 7 l l 4 4 3ch 32x32 l l 16ch, ADC12A — — 100PZ; 113QW $4.85
MSP430F5500 8 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 l — — — USB 48RGZ $1.45
MSP430F5501 16 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 l — — — USB 48 RGZ $1.50
MSP430F5504 8 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 — l 8ch — USB 48RGZ , 48PT $1.60
F55xx
MSP430F5505 16 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 — l 8ch — USB 48RGZ $1.65

MSP430F5506 24 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 — l 8ch — USB 48RGZ $1.80
MSP430F5507 32 4 + 2† 31 4 5,3,3 7 l l 1 1 3ch 32x32 — l 8ch ADC10 — USB 48RGZ $1.90
MSP430F5508 16 4 + 2† 47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC10 — USB 48RGZ, 48PT, $1.75
64RGC, 80ZQE
MSP430F5509 24 4+2 †
47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC10 — USB 48RGZ, 48PT, $1.85
64RGC, 80ZQE
MSP430F5510 32 4+2 †
47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC10 — USB 48 RGZ, 48PT, $1.95
64RGC, 80ZQE
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer. Additional 2K of SRAM available if USB is disabled
†

MSP430F5xx Series – Up to 25 MHz (continued)

Timers USCI
PMM: BOR,
Program SRAM I/O Watchdog SVS, SVM, Ch A: UART/ Ch B: Comp Temp ADC Additional 1 ku
Series Part Number (KB) (KB) (max) Total A B Timer LDO LIN/IrDA/SPI I2C/SPI DMA MPY B Sensor Ch/Res DAC Features Package(s) Price1
MSP430F5513 32 4 + 2† 47 4 5,3,3 7 l l 2 2 3ch 32x32 l — — — USB 64RGC, 80ZQE $3.25
MSP430F5514 64 4 + 2† 47 4 5,3,3 7 l l 2 2 3ch 32x32 l — — — USB 64RGC, 80ZQE $3.55
MSP430F5515 64 4 + 2† 63 4 5,3,3 7 l l 2 2 3ch 32x32 l — — — USB 80PN $3.65
MSP430F5521 32 6 + 2† 63 4 5,3,3 7 l l 2 2 3ch 32x32 l l 16ch ADC12 A — USB 80PN $3.35
F55xx
MSP430F5522 32 8 + 2† 47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC12 A — USB 64RGC, 80ZQE $3.40
MSP430F5524 64 4 + 2† 47 4 5,3,3 7 l l 2 2 3ch 32x32 l l 12ch ADC12 A — USB 64RGC, 80ZQE, 64YFF $3.55
MSP430F5630 128 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l — — — USB, Backup 100PZ, 113ZQW $4.65
battery switch
battery switch
battery switch
MSP430F5633 128 16 + 2
†
74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A — USB, Backup 100PZ, 113ZQW $5.35
battery switch
USB, Backup
F563x
MSP430F5634 192 16 + 2
†
74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A — battery switch 100PZ, 113ZQW $5.70
MSP430F5635 256 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A — USB, Backup 100PZ, 113ZQW $6.05
battery switch
MSP430F5636 128 16 + 2
†
74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A l USB, Backup 100PZ, 113ZQW $6.20
battery switch
MSP430F5637 192 16 + 2
†
74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A l USB, Backup 100PZ, 113ZQW $6.50
battery switch
MSP430F5638 256 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A l USB, Backup 100PZ, 113ZQW $6.85
battery switch
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer. Additional 2K of SRAM available if USB is disabled
†
New products are listed in red.
MSP430F6xx Series - Up to 25 MHz with LCD

16- Bit Timers USCI
PMM:
Flash SRAM I/O Watchdog BOR, SVS, Ch A: UART/ Ch B: Comp Temp ADC Additional 1 ku
Series Part Number (KB) (KB) (max) Total A* B* and RTC SVM, LDO LIN/IrDA/SPI I2C/SPI DMA MPY B Sensor Ch/Res DAC Features Packages Price1
MSP430F6630 128 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l — — — USB, LCD 100PZ, 113ZQW $5.85
MSP430F6633 128 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch, ADC12 A — USB, LCD 100PZ, 113ZQW $5.95
F663x
MSP430F6636 128 16 + 2† 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch, ADC12 A l USB, LCD 100PZ, 113ZQW $6.30
MSP430F6433 128 10 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A — LCD 100PZ, 113ZQW $5.00
MSP430F6434 192 18 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A — LCD 100PZ, 113ZQW $5.25
MSP430F6435 256 18 74 4 5,3,3 7 2 2 6ch 32x32 16ch ADC12 A — LCD 100PZ, 113ZQW $5.50
F643x
l l l l
MSP430F6436 128 18 74 4 5,3,3 7 l l 2 2 6ch 32x32 l l 16ch ADC12 A l LCD 100PZ, 113ZQW $5.75
MSP430F6720 16 1 72 4 2,2,2,3 — l l 3 1 3ch 32x32 — l (2) SD24, 8ch ADC10A — Backup AUX Supply 100PZ, 80PN $2.00
MSP430F6726 128 8 72 4 2,2,2,3 — 3 1 3ch 32x32 — (2) SD24, 8ch ADC10A — Backup AUX Supply 100PZ, 80PN $2.70
F643x
l l l
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare register per timer.
†
Additional 2K of SRAM available if USB is disabled. New products are listed in red.

CC430 (Sub-1GHz RF + MSP430™ Microcontroller) Series – Up to 20 MHz

16-Bit Timers USCI
Part Flash SRAM I/O Watchdog PMM: BOR, SVS, Ch A: UART/ Ch B: Comp Temp ADC Additional
Series Number (KB) (KB) (max) Total A* B* and RTC SVM, LDO LIN/IrDA/SPI I2C/SPI DMA MPY B Sensor Ch/Res Features Package(s) 1ku Price1 Common Features
CC430F5133 8 2 30 2 5 3 l l 1 1 3ch 32x32 l l 6ch ADC12 — 48RGZ $4.15 - AES HW Encryption
F51xx
CC430F5135 16 2 30 2 5 3 l l 1 1 3ch 32x32 l l 6ch ADC12 — 48RGZ $4.30 - Max RF Data Rate
CC430F5137 32 4 30 2 5 3 l l 1 1 3ch 32x32 l l 6ch ADC12 — 48RGZ $5.00 500 kbps
- Best Sensitivity:
CC430F6125 16 2 44 2 5 3 l l 1 1 3ch 32x32 l — — 96seg LCD 64RGC $4.35
110 dBm†
CC430F6126 32 2 44 2 5 3 l l 1 1 3ch 32x32 l — — 96seg LCD 64RGC $4.60 - Frequency Ranges:
F61xx
CC430F6127 32 4 44 2 5 3 l l 1 1 3ch 32x32 l — — 96seg LCD 64RGC $5.05 300-348 MHz

CC430F6135 16 2 44 2 5 3 l l 1 1 3ch 32x32 l l 8ch ADC12 96seg LCD 64RGC $4.65 389-464 MHz
CC430F6137 32 4 44 2 5 3 l l 1 1 3ch 32x32 l l 8ch ADC12 96seg LCD 64RGC $5.35 779-929 MHz
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare register per timer. †At 1.2 kBaud, 868 MHz, 1% packet error rate.
Automotive and Enhanced Performance
Frquency Flash SRAM 16-bit Brown Out USI Temp Additional

Series Part Number (MHz) (KB) (B) GPIO Timers Watchdog Reset (I2C/SPI) DMA MPY Comp Sensor ADC Features Pin/Package
MSP430F2232-Q1 16 8 512 32 2 l l 2 — — — l 12ch ADC10 — 40RHA, 38DA
MSP430F2234-Q1 16 8 512 32 2 l l 2 — — — l 12ch ADC10 (2) Op Amp 38DA, 40RHA
MSP430F2252-Q1 16 16 512 32 2 l l 2 — — — l 12ch ADC10 — 38DA, 40RHA
MSP430F2272-Q1 16 32 1024 32 2 l l 2 — — — l 12ch ADC10 — 38DA, 40RHA
MSP430G2001-Q1 16 0.5 128 10 1 l l 1 — — — — — — 14PW, 16RSA
MSP430G2101-Q1 16 1 128 10 1 l l 1 — — l — — Cap Touch IO 14PW, 16RSA
MSP430G2111-Q1 16 1 128 10 1 l l 1 — — l — Slope Cap Touch IO 14PW, 16RSA
Auto and EP

MSP430G2131-Q1 16 1 128 10 1 l l 1 — — l — 8ch ADC10 Cap Touch IO 14PW, 16RSA
MSP430G2201-Q1 16 2 128 10 1 l l 1 — — l l — Cap Touch IO 14PW, 16RSA
MSP430G2211-Q1 16 2 128 10 1 l l 1 — — l — Slope Cap Touch IO 14QFN, 14PW, 16RSA
MSP430G2231-Q1 16 2 128 10 1 l l 1 l 16x16 l l 8ch ADC10 Cap Touch IO 14PW, 16RSA
MSP430F2619S-HT 16 60 4096 48 2 l l 2 — — l l 8ch ADC12 DAC12 64LQFP
MSP430F2013-EP 16 2 128 10 1 l l 1 — — l l 4ch SD16 — 16QFN
MSP430F2274-EP 16 32 1024 32 2 l l 2 — — l l 12ch ADC12 (2) Op Amp 38TSSOP, 40VQFN
MSP430F249-EP 16 60 2048 48 2 l l 2 — 16x16 l l 8ch ADC12 — 64LQFP
MSP430F2618-EP 16 116 8192 48 2 l l 2 l 16x16 l l 8ch ADC12 DAC12 113BGA MICROSTAR
JUNIOR
1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. New products are listed in red. Preview products are listed in blue.
MSP430™ FRAM Series – Up to 24 MHz

Timers USCI
CPU PMM: BOR,
FRAM SRAM Speed I/O Watchdog SVS, SVM, Ch A: UART/ Ch B: Comp Temp ADC Additional 1 ku
Series Part Number (KB) (B) (MHz) (max) Total A* B* and RTC LDO LIN/IrDA/SPI I2C/SPI DMA MPY B Sensor Ch/Res Features Pin/Package Price
MSP430FR5720 4 512 8 33 3 3,3 3, 3 l l 1 1 l l l l 10ch ADC10B MPU 24RGE, 28PW $1.75
MSP430FR5721 4 512 8 33 5 3,3 3, 3, 3 l l 2 1 l l l l 14ch ADC10B MPU 38DA, 40RHA $1.80
MSP430FR5722 8 1024 8 33 3 3,3 3, 3 l l 1 1 l l l l — MPU 24RGE, 28PW $1.85
MSP430FR5723 8 1024 8 33 5 3,3 3, 3, 3 l l 2 1 l l l l — MPU 38DA, 40RHA $2.00
MSP430FR5724 8 1024 8 33 3 3,3 3, 3 1 1 10ch ADC10B MPU 24RGE, 28PW $1.95
FR572x
l l l l l l
FR573x

1Prices are quoted in U.S. dollars and represent year 2012 suggested resale price. *Represents number of capture/compare registers per timer. Preview products are listed in blue.

Ultra-Low Power MSP430™ MCU Selected Package Options
14-pin TSSOP (PW) 14-pin N (DIP) 16-pin RSA (QFN) 20-pin DVG (TVSOP) 20-pin TSSOP (PW) 20-pin SOIC (DW)
(19,18) (4,00) (12,80)
(5,00) (5,00) (6,50)
(6,40) (10,58) (4,00) (6,40) (6,40) (10,30)
20-pin N (PDIP) 24-pin RGE (QFN) 28-pin DW (SOIC) 28-pin TSSOP (PW) 32-pin RTV (QFN) 32-pin RHB (QFN)
(26,92) (4,00) (17,90)
(9,70) (5,15) (5,00)
(10,50) (4,00) (10,30) (6,40) (5,15) (5,00)
38-pin DA (TSSOP) 40-pin RHA (QFN) 40-pin RSB (QFN) 48-pin RGZ (QFN) 48-pin DL (SSOP) 48-pin PT (LQFP)
(7,00) (15,88)
(12,50) (6,0) (5,15) (9,00)
(8,10) (6,0) (5,15) (7,00) (10,35) (9,00)
64-pin RGC, RTD (QFN) 64-pin PM, PAG (LQFP/TQFP) 80-pin ZQE (BGA) 80-pin PN (LQFP) 100-pin PZ (LQFP) 113-pin ZQW (BGA)
(14,00) (16,00)
(9,00) (12,00)
(7,00)
(5,00)
(9,00) (12,00) (5,00) (14,00) (16,00) (7,00)
Die-Size BGA Packages
49-pin YFF (DSBGA) 49-pin YFF (DSBGA) 64-pin YFF (DSBGA)

MSP430F22xx MSP430F23xx MSP430F55xx
(3,40) (3,10) (3,76)
(3,40) (3,10) (3,76)
All dimensions are nominal values in millimeters.
TI University Program
Technology for Tomorrow’s Innovators
The TI University Program is dedicated to support educators,researchers and students with
assistance integrating TI technology into course curricula, senior design and research projects.
University Zone Blog Learn more about the program,

Connect with TI’s university experts sample free Embedded ICs, discounted
and follow the latest trends in development kits, and get support with
engineering academia. your senior design projects or curriculum
www.ti.com/universityblog development.
www.ti.com/university

Thinking Microcontrollers? Think TI.
Embedded Processing Portfolio

MCU Software, Tools, Kits & Boards DSP and ARM® MPU
Microcontroller (MCU) ARM® Digital Signal Processor (DSP)
Portfolio at-a-glance Portfolio at-a-glance Portfolio at-a-glance
16-bit Ultra-Low 32-bit 32-bit MCUs 32-bit 16/32-bit 32-bit

Power and Real-Time MCUs Microprocessors Single-core DSPs Multicore DSPs
Value Line MCUs Stellaris®
ARM MCU and Sitara™ C6000™ and C6000™ -based
MSP MCU
™
C2000 MCU™
Hercules™ ARM MPU C5000™ multicore DSP
Safety ARM MCU single-core DSP
– Delfino, Piccolo Fixed/floating-point:
single-core MCU – C6000 high – DSP + ARM
– MSP430 MCU performance – C66x multicore DSP
– Concerto C28x+ – ARM Cortex™-M – ARM Cortex-A8
ARM Cortex™-M fixed/floating-point
– ARM Cortex™-R – ARM9™ – DaVinci video
DSP
processors
– C5000 ultra-low
Motion control, power fixed-point
Measurement, Motor control, human machine Industrial DSP High performance
sensing, general digital power, interface, industrial automation, real-time computing,
purpose, consumer, lighting, renewable automation, smart point-of-service, Connected audio/ video security
medical energy grid, safety, human machine voice, video, and analytics, video
transportation, interface, fingerprint communications,
industrial and portable navigation biometrics, portable multimedia
medical medical, sensors infrastructure
TI Worldwide Technical Support

Internet Asia
Phone
TI Semiconductor Product Information Center Home Page International +91-80-41381665
support.ti.com Domestic Toll-Free Number
TI E2E Community Home Page Australia 1-800-999-084
e2e.ti.com China 800-820-8682
Hong Kong 800-96-5941
India 1-800-425-7888
Product Information Centers Indonesia 001-803-8861-1006
Americas Phone +1(972) 644-5580 Korea 080-551-2804
Brazil Phone 0800-891-2616 Malaysia 1-800-80-3973
New Zealand 0800-446-934
Mexico Phone 0800-670-7544 Philippines 1-800-765-7404
Fax +1(972) 927-6377 Singapore 800-886-1028
Internet/Email support.ti.com/sc/pic/americas.htm Taiwan 0800-006800
Thailand 001-800-886-0010
Europe, Middle East, and Africa Fax +886-2-2378-6808
Phone Email tiasia@ti.com
European Free Call 00800-ASK-TEXAS ti-china@ti.com
(00800 275 83927) Internet support.ti.com/sc/pic/asia.htm
International +49 (0) 8161 80 2121
Russian Support +7 (4) 95 98 10 701 Important Notice: The products and services of Texas Instruments
Incorporated and its subsidiaries described herein are sold subject to TI’s
Note: The European Free Call (Toll Free) number is not active in all countries. standard terms and conditions of sale. Customers are advised to obtain
If you have technical difficulty calling the free call number, please use the the most current and complete information about TI products and services
international number above. before placing orders. TI assumes no liability for applications assistance,
Fax +(49) (0) 8161 80 2045 customer’s applications or product designs, software performance, or
infringement of patents. The publication of information regarding any
Internet support.ti.com/sc/pic/euro.htm other company’s products or services does not constitute TI’s approval,
Japan warranty or endorsement thereof.
Phone Domestic 0120-92-3326
B121709
Fax International +81-3-3344-5317
The platform bar, MSP430, eZ430-Chronos, SimplicTI, Code Composer Studio,
Domestic 0120-81-0036 Grace, SmartRF and C2000 are trademarks of Texas Instruments. The
Internet/Email International support.ti.com/sc/pic/japan.htm Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any
Domestic www.tij.co.jp/pic use of such marks by Texas Instruments is under license. ARM is a registered
trademark of ARM Limited. WiMax is a trademark of the WiMax Forum.
ZigBee is a registered trademark of the ZigBee Alliance. All other trademarks
are the property of their respective owners.
© 2012 Texas Instruments Incorporated SLAB034V

IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated

Datasheet PDF

Uploaded by

Copyright:

Available Formats

Datasheet PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Datasheet PDF

Uploaded by

Copyright:

Available Formats

2 Ultra-Low-Power MSP430™ Microcontrollers

MSP430 Microcontrollers (MCUs) from Texas Instruments (TI) are

400+ Ultra-Low-Power Devices

Control MCLK 100 kHz-25 MHz

www.ti.com/msp430 Ultra-Low Power is in our DNA

MSP430™ Microcontroller DNA

Highly Integrated Easy to Get Started

Description Interrupt Sources

Timers, ADC, DMA, UART, WDT, I/0, comparator, Ext.

LPM4 CPU is shutdown and all clocks disabled. l l Ext. Interrupt

No RAM retention, RTC disabled.

Join our online community at www.ti.com/e2e-mcu

Why Choose an MSP430™ Microcontroller?

Multiple Package Options Easy-to-Use Software Low-Cost Options

Ultra-Low Power Performance — Analog Integration — Easy-to-Use

SVM ADC10, 12 SD16 USART

Some Devices All Devices USI

www.ti.com/msp430 Ultra-Low Power is in our DNA

Metering Portable Medical Data Logging

Wireless Communications Capacitive Touch Personal Health and Fitness

Energy Harvesting Motor Control Security and Safety

Join our online community at www.ti.com/e2e-mcu

What’s New with MSP430™ Microcontrollers?

FRAM: The future of embedded memory Industry-leading speed

What’s New with MSP430™ Microcontrollers?

MSP-EXP430F5529 Experimenter Board is a fully featured USB development

Join our online community at www.ti.com/e2e-mcu

MSP430™ MCU Software Tools

Integrated Development Environments

Code Composer Studio™ IDE

IAR Embedded Workbench

Open Source MSPGCC and MSPDEBUG

www.ti.com/msp430 Ultra-Low Power is in our DNA

MSP430™ MCU Software Tools

The Brand New MSP430 Driver Library Driver

• Driver Library and documentation delivered within MSP430Ware

Get started quickly with Grace code generation

MSP430 USB MSP430 RF

MSP430 Software Ecosystem

Join our online community at www.ti.com/e2e-mcu

MSP430™ MCU Hardware Tools

LaunchPad and the BoosterPack Ecosystem

Complete Development kit for $4.30!

Growing Ecosystem of BoosterPacks!

eZ430 Starter Kits

Part Number Description Picture Price

www.ti.com/msp430 Ultra-Low Power is in our DNA

MSP430™ MCU Hardware Tools

MSP-EXP430F5438 MSP-EXP430FG4618 MSP-EXP430F5529 MSP-EXP430FR5739 MSP-EXP430F6137RFx

One tool to rule them all. Debugging and Programming Tools

Join our online community at www.ti.com/e2e-mcu

Application-Specific MSP430 Devices

MSP430F1xx Series – Up to 8 MHz

Flash SRAM I/O USART Temp ADC Additional 1 ku

MSP430F1111A 2 128 14 1 3 — l — — — — — l — Slope — 20DGV, DW, PW; 24RGE $1.35

MSP430F1132 8 256 14 1 3 — l l — — — — — l 5ch, ADC10 — 20DW, PW; 32RHB $2.25

MSP430F123 8 256 22 1 3 — l — — 1 — — l — Slope — 28DW, PW; 32RHB $2.30

MSP430F1232 8 256 22 1 3 — l l — 1 — — — l 8ch, ADC10 — 28DW, PW; 32RHB $2.50

MSP430F135 16 512 48 2 3 3 l — — 1 — — l l 8ch, ADC12 — 64PM, PAG, RTD $3.60