FLY SMi2000FE EN
FLY SMi2000FE EN
FLY SMi2000FE EN
AC input
dc output
Nominal voltage 48 VDC
Voltage range 42 to 58 VDC
Output power rating 2000 W input ≥184 VAC ≤290 VAC
1000 W input ≥90 VAC ≤140 VAC
Automatic linear de-rating from 184 VAC to 90 VAC
Output current rating 41.7 A at 48 VDC
Constant power characteristic from 58 VDC to 48 VDC
Hold up time >10 ms Po = 2000 W
Turn on
Start up delay <3 s
Rise time <500 ms
Walk in 5 to 10 s
Voltage regulation
Set point accuracy <1 %
Total regulation <2 % (line, load & temperature)
Ripple and noise
Psophometric <2.0 mV weighted
Protection
Power limit 2000 W @ 48 V to 58 V
Current limit 42 A typical, with automatic recovery, programmable
Hot plugging Automatic current surge limiting
Over voltage Shutdown, with auto-restart, programmable, latched after 2nd fault
Over temperature Automatic power de-rating and excessive temperature shutdown
3
Mechanical
Dimensions (H x W x D) (mm) 41.5 (1 U) x 109 x 325
Weight (kg) 2
Connections Rear mounted
environmental
IP rating IP20
Operating temperature -40 °C to +75 °C Automatic de-rating above 55 °C
Storage temperature -50 °C to +85 °C
Humidity 5 % to 95 % (non-condensing)
Acoustic noise <55 dB(A) Full load
RoHS 2002 / 95 / EC
WEEE 2002 / 96 / EC, 2003 / 108 / EC
Altitude Up to 2500 m without de-rating
Reliability
MTBF >350,000 hours Telcordia SR-332
Regulatory standards
Safety
International EN60950-1
North America UL / CSA 60950-1
Safety approvals CE / UL(*) / TÜV / cTUVus
Electro-magnetic » Installed in system
compatibility (EMC)
Emissions, conducted EN55022, Class B
Emissions, radiated EN55022, Class B
Immunity
ESD IEC/EN 61000-4-2
Radiated “E” field IEC/EN 61000-4-3
Fast transient burst IEC/EN 61000-4-4
Surge IEC/EN 61000-4-5
Conducted RF IEC/EN 61000-4-6
Radiated “H” field IEC/EN 61000-4-8
Power line dips IEC/EN 61000-4-11
“ANSI” surge IEEE C62.41
Telecom networks EN300-132-2, EN300-386-2
(*) Pending
AEG Power
Solutions
Services
With over 60 years of expertise mission-critical equipment. »»Pro CareTM preventive
in power systems and solutions, The reliability of your installed maintenance options
AEG Power Solutions is power solution is supported »»Turnkey solutions
renowned for its unparalleled by a global service team
services and technical renowned for its short response »»Installation and
support in critical application time and trouble shooting commissioning
environments. As a world class efficiency. Choosing one of »»Maintenance services
systems provider, you can the Pro CareTM preventive
rely on a global network of 20 maintenance options gives »»E-Service /remote monitoring
AEGPS - SMi2000FE - EN - 07/2012 V1 - Due to our policy of continuous development, the data in this document is subject to change without notice.
services centers supported you the ultimate peace of »»24 /7 hotline
by over 150 field engineers mind reassuring complete »»Onsite training
and more than 100 certified cost control, security and
service partners around the uninterrupted power supply »»Hot swapping
world. From the power solution in utmost critical situations. »»Onsite battery replacement
selection to your process
installation and commissioning, You can also benefit from »»Battery monitoring
our certified experts go a full range of professional »»Facility and equipment
beyond your expectations by services that will protect and management
offering service excellence ensure the durability of your
that will ensure the lowest investment and will take over »»24 /7 global onsite contracts
operational cost for your when you need it most: »»Power quality assessment
»»Load bank and
site capacity analysis
»»Trouble shooting and repair