Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    tp600 Series

    Uploaded by

    PT. GARUDA SUPER LINK

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    tp600 Series

    Uploaded by

    PT. GARUDA SUPER LINK
    20 views1 page

    Original Title

    tp600_series

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views1 page

    tp600 Series

    Uploaded by

    PT. GARUDA SUPER LINK

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TP600 Series

    Compact Standalone Inverters

     Standalone design
     True sine wave output with THD < 3%
     Galvanic isolated circuits
     Serial interface RS232 and RS485
     Built-in automatic transfer switch (ATS) with
    selectable operating mode

    Modern solid state device with patent pending control algorithms, the TP600 inverter series is a compact and cost-
    effective solution for most telecom and industrial applications. The compact mounting package makes this model
    the solution of choice for limited space applications.

    Output Nominal input voltage Mechanical (WxHxD)


    Model
    power 24Vdc 48Vdc 110Vdc/125Vcc/220Vdc  A - 482.6 x 91 x 301mm, 6kg
     B - 482.6 x 91 x 366mm, 12kg
    TP610 1kVA A - -  C - 482.6 x 91 x 454.2mm, 15kg
    TP620 2kVA B A A
    Environmental
    TP630 3kVA - B B
     Operating: -10 to +60°C, with linear power derating above 40°C
    TP640 4kVA - B B  Storage temperature: -40 to +85°C
    TP650 5kVA - C B  Humidity: 0 to 95% RH non-condensing
     Altitude: -500 to +2800m
    TP660 6kVA - - B  Cooling: Forced air
     Ingress protection rating: IP20
    Electrical
    Protection
     Operating input voltage range: 20-29.5Vdc (24Vdc), 40-59.5Vdc (48Vc),
    91.5-136Vdc (110Vdc), 104-143VDC (125VDC), 183-272Vdc (220Vdc)  Reversed polarity
     Output frequency: 50/60Hz ± 0.1%  Overtemperature
     Power factor: 0.8*  Overload
     Efficiency: 90% typical  Output shortcircuit
     Output nominal voltage: 110/120Vac, 220/230/240Vac  DC overvoltage
     Voltage variation: ± 2% Unout  DC undervoltage
     Crest factor: 3:1  Bypass overvoltage
     Dynamic response time: < 30ms  Bypass undervoltage
     Isolation:
    AC - DC: 2000Vrms Agency Compliance
    DC - Ground: 2000Vrms Safety
    AC - Ground: 2000Vrms  EN 60950-1, CE Marked to LVD 2006/95/EC
     THD: < 3% linear load, < 5% non linear load
     Overload: 125% - 60 sec. (10sec. for ATP660) Emissions
    110% - 10 min. (30sec. for ATP660)  EN55022
     MTBF: >100.000 hours  EN61000-3-2
     EN61000-3-3
    * Power factor is 0.7 for TP640, TP650 and TP660  EN55024
    Automatic Transfer Switch Immunity
     AC voltage range: -25% to +20% Nominal Vin  EN 61000
     Frequency range: 45 to 65Hz
     Operating modes: online (load supplied primarily by inverter) and offline (load
    supplied primarily by AC mains) Galvanic isolation
     Transfer time: 5-8ms
    AC Input AC Output
    User interface
     LED indicators: Operating mode (On, Bypass, AC input ), Fault, DC Voltage,
    Load Level
     4 dry contacts for alarms: Line Fail, Low DC Voltage, Inverter Fault, Overload DC Input
     Audio: Internal speaker for alarms
     Serial port RS232 and RS485
     Optional: external Ethernet interface

    08/2021

    for POWER CONVERTER


    DEPOT www.powerconverterdepot.com

    You might also like