VMC-Haj House - Final Estimate 09.01.19
VMC-Haj House - Final Estimate 09.01.19
VMC-Haj House - Final Estimate 09.01.19
6 Revised standard data- Item -20-a : Augoring and boring of holes in site for
Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like
Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980
as per approved designs including all operations, incidental, labour charges, 8107.00 484.81 1 Rmt
hire charges of machinery, augur bore drill and shell equipment, etc, complete
for all depths and for finished item of work for piles unit 1.00 Rmt - 600mm dia
piles
9 Reffling with excavated useful soils including sand/Gravel (where rock cutting is
done) with standard specification after the pipe lline is laid jointing and tested as
directed by the departmental officer including breaking clods etc, complete. - 49.62 31.75 1 Cum
10 Carting of surplus excavated earth from the work site with a lead of 10.00 Km
beyond initial lead including loading, unloading and conveyance charges by 392.46 151.40 1 Cum
tippers and trucks -
11 BLD-CSTN-3-14-(31) - A : Supply and placing of the M-30 Design Mix Concrete
corresponding to IS 456 using WEIGH BATCHER with 20mm size graded
machine crushed hard granite metal (coarse aggregate) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site including all operational, incidental
and labour charges such as weigh batching, machine mixing, laying concrete,
vibrating, curing, centering and suttering charges etc.,complete but excluding
seignorage charges, cost of steel and its fabrication charges for finished item of
work (APSS No. 402) with minimum cement content as per IS code for
PLINTH, PEDESTALS and FOOTINGS.
Note : 1) The cement content is adopted as 400Kg/cum for estimating purpose
only.The exact quantities will be as per mix design. 2) As per mix design, if the
cement content is found to be less than 400 Kgs/ Cum the defference in cost
shall be deducted.
Main Building :
Brick wall - Basement - 36.18 5383.19 1 Cum
Steps - 21.38 5383.19 1 Cum
Ground Floor ( 225mm Thick Walls) - 251.98 5383.19 1 Cum
1st Floor outer walls - 256.86 6242.70 1 Cum
2nd Floor outer walls - 249.81 6741.89 1 Cum
3rd floor - Outer walls - 150.32 7241.01 1 Cum
4th floor - Outer walls - 150.32 7740.20 1 Cum
5th floor - Outer walls - 150.32 8239.33 1 Cum
6th floor - Outer walls - 172.31 8738.46 1 Cum
Septic Tank- Brick Masonary - 1.07 5383.19 1 Cum
Ladies Toilets - 35.20 5383.19 1 Cum
20 BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement
solid blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks
using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust
including cost and conveyance of all materials, labour charges, scaffolding and
curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for
walls for Superstructure Walls.
Main Building :
Semi Basement Floor - 25.57 5045.76 1 Cum
Ground floor - 165.79 5045.76 1 Cum
1st floor - 155.09 6428.56 1 Cum
2nd floor - 195.77 7132.78 1 Cum
3rd floor - 338.17 7836.86 1 Cum
4th floor - 338.17 8541.08 1 Cum
5th floor - 338.17 9245.18 1 Cum
6th floor - 318.28 9949.28 1 Cum
7th floor - Outer walls - 30.50 9949.28 1 Cum
Ladies Toilets - 7.38 5045.76 1 Cum
21 BLD-CSTN-7-1-(72) : Providing flush Cement Pointing to CRS Masonary in
Cement Mortor (1:3) Prop . for including cost & conveyance of all materials to
site , seignaiorage charges on all materials, labour charges on all materials, 26.74 86.47 1 Sqm
curing etc., Complete for finished item of work. For Ladies Toilets -
22 BLD-CSTN-8-9-(84) ; Plastering 20mm thick two coats with base coat of 16mm
thick in C.M. (1:6) and top coat of 4mm thick in C.M. (1:3) with dubara sponge
finishing including cost & conveyance of all materials like cement, Sand , Water,
etc., to site, seigniorage charges, all operational, including charges, labour
charges for mixing mortar, finishing, scaffolding, lift charges, curing , including
cutting grooves where ever necessary etc., complete for finished item of work of
uneven surfaces of walls. (External walls)
Main Building :
Ground Floor - 1713.33 416.47 1 sqm
1st floor - 1651.08 468.35 1 sqm
Final Estimate 09.01.19 5
Page 6 of 787
Main Building :
` Semi basement - 246.31 411.63 1 Sqm
Ground floor - 4559.99 411.63 1 Sqm
Inner walls - First floor - 3414.66 450.13 1 Sqm
Inner walls - Second floor - 4273.89 488.62 1 Sqm
Inner walls - Third floor - 3398.76 527.12 1 Sqm
Inner walls - Fourth floor - 3398.76 565.62 1 Sqm
Inner walls - Fifth floor - 3398.76 604.11 1 Sqm
Inner walls - Sixth floor - 6493.98 642.61 1 Sqm
25 BLD-CSTN-8-1-(76) : Plastering with 12mm thick in single coat in CM (1:3)
finished smooth including cost and conveyance of all materials to site, finishing,
curing, scaffolding and all operational, incidental, labour charges etc., including
cutting grooves where ever necessary etc., complete for finished item of work.
(As per SS 903). per 10 Sqm.
a Main Building :
ceiling plastering -Semi basement - 3553.83 140.83 1 Sqm
Ceiling plastering -Ground Floor - 2290.06 140.83 1 Sqm
Ceiling plastering -First Floor - 2818.83 151.10 1 Sqm
Ceiling plastering -Second Floor - 2818.83 161.38 1 Sqm
Ceiling plastering -3rd Floor - 2634.59 171.66 1 Sqm
Ceiling plastering -Fourth Floor - 2479.35 181.93 1 Sqm
Ceiling plastering -Fifth Floor - 2479.35 192.21 1 Sqm
Ceiling plastering -Sixth Floor - 2789.18 202.49 1 Sqm
For Toilets and Septic Tank - 171.06 140.83 1 Sqm
26 BLD-CSTN-12-2-(169) : Painting, Priming Coat on New Plastered Surface with
Cement Primer Water base after thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials including cost of all materials,
labour charges and incidental such as scaffolding, lift charges etc., complete for
finished item of work.
Main Building :
Final Estimate 09.01.19 6
Page 7 of 787
28 Providing and applying synthetic plaster putty or equivalent putty such as birla
wall care putty or texture paint or equivalent such as NCL/ Saicoat texture
paint of average 2 to 3 mm thickness over plastered surface to prepare the
surface even and smooth after thoroughly brushing the surface to remove all dirt
and remains of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty
knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost 12556.71 381.14 1 Sqm
and conveyance of all materials to work site and all operational, incidental,
labour charges etc. complete for finished item of work for external walls - Main
Building : external walls -
Main Building :
Ground floor - 917533.00 64.50 1 Kg
1st floor - 174016.80 65.85 1 Kg
2nd floor - 161977.54 67.19 1 Kg
3rd Floor - 138976.61 68.54 1 Kg
4th floor - 138976.61 69.88 1 Kg
5th floor - 138976.61 71.22 1 Kg
6th floor - 165799.99 72.57 1 Kg
For Sump, Septic tank and Toilets - 12793.55 64.50 1 Kg
33 BMT.P.29: Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC)
sliding windows three track - two glass shutters sliding and one mesh shutter
duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm
x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0
mm for sliding shutter frames capable of mounting single glazing system
structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion welding the window
sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh
shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with
479.52 6893.05 1 Sqm.
nylon/ polymer mesh on rollers/ pulley duly fixed with TPV Gaskets/ EPDM
weathering seal resistant accessories like locking system 1No., per set of
sashes and the system is to be installed at the site using anchor fasteners,
silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for finished item of
work. For Main Building -
34 Supplying and fixing of MS Grill for windows using 25mm x 6mm MS flat
alround and 10mm MS square bars horizontally at 125mm centre to centre and
vertically at 30cm centre to centre including fixing with 4 Nos of MS Z holdfasts
(2 on each side) duly making cutting brick masonry, fixing and making to original
surface neatly and painting grill with one coat of red oxide primer including and 479.52 971.34 1 Sqm.
conveyance of all materials ,cutting, bending, welding including all operational
charges and all labour charges etc., complete for finished item of work. -
35 Providing GFRC designed Pannels with fibre reinforced pre-cast concrete with
50-50 sand cement matrix in a typical wall thickness of 50mm. Hallow rib
profiles created around the perimeter and across the rear face at designed
centres. For windows and elevation including cost and conveyance of all 1930.40 3766.00 1 Sqm.
material and all labour charges as per standerd practice and as directed by the
engineer-in-charge -
36 Supply and fixing of two shutter Ornamental Main Door as per approved
drawing with 1st class teak wood frame of section 150mm x 125 mm with fixed
fan light of 300mm at top and fixed panels at both sides 300mm wide with
12mm thick plain glass with ornamental Etching & bevelling by fixing using
12mm x 25mm teak wood beading and Shutters made up of 1st class teak
wood top and middle rails & Vertical styles of section 120mm x 35mm,bottom
rail of size 150mm x 35mm and 12mm thick plain glass with ornamental
Etching& bevelling on 12mm thick plain glass including cost and conveyance to
site of teak wood frame, shutters,glass including supply and fixing 6 nos MS
8 135100.00 1 Nos
Zhold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass
fixtures of 8 Nos butt hinges 150mm long , 1 No. aldrop heavy duty 300mm
long, 2 Nos tower bolts of 300 mm long at top ,2 Nos tower bolts of 200 mm
long at bottom, 2 Nos 300 mm long fancy handles( for frant side),2 Nos 150 mm
long bass handles( for back side),1 No.brass flat latch, 2 Nos heavy duty door
stoppers including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for making & fixing the frame in position,
making & fixing the shutters to the frame, Etching & bevelling on glass etc.
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
37 of door shall
BMT-N.58 be embedded
: Providing in flooring
and fixing for a fabricated
door frames depth of not
fromless than made
sections 40 mm)
of
galvanized steel powder coated (base steel as per IS 513, galvanised as per IS
277 with zinc of 120 grams / square metre), the factory made section are
powder coated with pure polyester powder of 50-60 microns thick with total
coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with
a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to
insert gasket in the frame section, frame section filled with polyurethane foam,
cut to length, and joined by way of welding, each frame provided with: a) 2mm 3594.30 783.95 1 Rmt
thick MS powder coated butt hinges of 100 mm long – 3 Nos. for single shutter,
6 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each
vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos.
with split end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame.
e)Tie Rod – 1 No. For main building and Toilets -
38 BMT-N.22 : Supply and Fixing Flush door shutters, solid bond wood block
board type with teak veneer on one face and commercial ply on another face
(lipping): 35 mmthick conforming to IS:2202, fitted with 1no. 300 mm long MS
Aldrop, 2 nos. 125 mm lond Aluminium door handle, 1 no. 250 mm long 761.04 6295.23 1 Sqm
Aluminium tower bolt, 1 no. 250 mm long Aluminium door latch & 1
No.Aluminium door stopper including cost and conveyance of all material and
all fixtures etc, complete. For main Building -
39 Providing and fixing 30mm thick WPC ( Wood Plastic Composition ) Door
Shutters as per manufacture specification fitted with Hinges, 2 Nos of 250 mm
long MS Aldrop, 2 Nos of 125 mm lond Aluminium door handle, 1 No.of 250
mm long Aluminium tower bolt, 1 no. 250 mm long Aluminium door latch & 1 485.10 4252.61 1 Sqm
No.baby lock including cost and conveyance of all material , all fixtures and all
labour charges etc, for fixing etc, complete. For main Building and Toilets -
40 BMT-F.30: Supplying & fixing collapsible steel shutters with vertical, double
channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm
with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site
height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary
194.86 2889.23 1 Sqm
hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all
accessories all fixtures and painted with one coat of approved steel primer etc.,
complete for finished item of work as per special spn 1105. For main building
and toilets -
41 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA
laths, interlocked together through their entire length and jointed together at the
ends by end-locks, mounted on specially designed pipe shaft of 50mm dia
nominal bore MS B class pipe with brackets, plates, guide channels, stoppers,
bottom locking plates and arrangements for inside & outside locking with push-
45.00 3302.79 1 Sqm
pull operations including cost of hood cover and springs complete, painted with
one coat of approved steel primer, locks, ball bearings, all accessories etc
complete for finished item of work as per special spn: 1108. For main Building
-
42 BMS-W.19: Supplying and fixing of 7.5mm thick Aluminium Grill (as approved
by the department) 3.58 Kg/Sqm.including cost and conveyance of all material
and all labour charges etc, complete. For main building and toilets - 168.30 1069.12 1 Sqm
For main building, portico area and ground floor - 871.62 4413.33 1 Sqm
1st floor - 90.56 4491.14 1 Sqm
2nd floor - 85.77 4568.94 1 Sqm
3rd floor - 61.79 4646.75 1 Sqm
4th floor - 61.79 4724.56 1 Sqm
5th floor - 61.79 4802.36 1 Sqm
6th floor - 66.59 4880.17 1 Sqm
45 BLD-CSTN-9-1-(99) : Flooring with Polished Shabad stones 1st class 15 to 18
mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid
CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency
spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including
cost of all materials like cement, sand, and water and flooring stones etc.,
complete, including labour charges for dressing of flooring stones etc.,
complete for finished item of work, including the cost and conveyance of all
materials.
Main Building:
Ground floor - 188.80 596.85 1 Sqm
1st floor - 182.28 632.19 1 Sqm
2nd floor - 92.39 667.53 1 Sqm
3nd floor - 105.04 702.87 1 Sqm
4th floor - 105.04 738.21 1 Sqm
5th floor - 105.04 773.55 1 Sqm
6th floor - 49.41 808.89 1 Sqm
Main Building:
Ground floor - 368.97 993.22 1 Sqm
1st floor - 336.91 1035.65 1 Sqm
2nd floor - 531.17 1078.07 1 Sqm
3rd floor - 1413.78 1120.49 1 Sqm
4th floor - 1413.78 1162.91 1 Sqm
5th floor - 1413.78 1205.34 1 Sqm
6th floor - 1409.13 1247.76 1 Sqm
47 BLD-CSTN-9-5-(103) : Flooring with Nano polished soluble salt porcelain
vitrified tiles screen printed of size 800 x 800 mm and thickness between 9-11
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15)
of any colour and finish in all shades and designs set over base coat of
cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like consistency spread @ 3.3.kgs per
sqm & jointed neatly with white cement paste to full depth mixed with pigment of
matching shade, including cost of all materials like cement, sand water and tiles
etc., complete, for finished item of work, including the cost and conveyance of
all materials.
Main Building:
Ground floor - 1597.97 1548.68 1 Sqm
1st Floor - 1620.20 1591.10 1 Sqm
2nd Floor - 2023.57 1633.52 1 Sqm
3rd Floor - 864.66 1675.94 1 Sqm
4th floor - 864.66 1718.37 1 Sqm
5th floor - 864.66 1760.79 1 Sqm
6th floor - 879.05 1803.21 1 Sqm
48 BLD-CSTN-9-6-(104) : Supply of Non-skid red or white full body Ceramic floor
tiles of scratch free- stain free and scratch free-nano finish of size 600 x 600
mm and thickness between 8-10 mm 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed
already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste
to full depth mixed with pigment of matching shade, including cost of all
materials like cement, sand water and tiles etc., complete for finished item of
work, including the cost and conveyance of all materials. (For Toilets)
Main Building:
Semi Basement floor- Toilets Flooring - 7.08 1074.50 1 sqm
Ground floor- Toilets Flooring - 107.86 1074.50 1 Sqm
1st floor - 94.23 1116.92 1 Sqm
2nd floor - 107.44 1159.34 1 Sqm
3rd Floor - 164.88 1201.77 1 Sqm
4th floor ( Area) - 164.88 1244.19 1 Sqm
5th floor ( Area) - 164.88 1286.61 1 Sqm
6th floor ( Area) - 204.11 1329.03 1 Sqm
For Toilets - 84.04 1074.50 1 Sqm
Final Estimate 09.01.19 11
Page 12 of 787
Main Building:
Ground floor - 188.80 663.14 1 Sqm
1st floor - 182.28 704.34 1 Sqm
2nd floor - 92.39 745.53 1 Sqm
3rd floor - 105.04 786.72 1 Sqm
4th floor - 105.04 827.92 1 Sqm
5th floor - 105.04 869.11 1 Sqm
6th floor - 49.41 910.31 1 Sqm
50 BLD-CSTN-9-21 - (119) : Providing skirting to internal walls to 15 cm height /
risers of steps with 8 mm thick mirror polished granite tiles length equal to
flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed
with white cement paste mixed with pigment of matching shade to full depth,
including cost of all materials like tiles, cement, sand and water etc., complete
for finished item of work
Main Building:
Ground floor - 15.24 1783.74 1 Sqm
1st floor - 15.24 1834.58 1 Sqm
2nd floor - 14.56 1885.42 1 Sqm
3rd floor - 11.19 1936.26 1 Sqm
4th floor - 11.19 1987.10 1 Sqm
5th floor - 11.19 2037.94 1 Sqm
6th floor - 11.86 2088.78 1 Sqm
51 BLD-CSTN-9-20 - (118) : Providing skirting to internal walls to 15 cm
height/risers of steps with digital / polished glazed full body porcelain wall tiles
of size 300 x 600mm with any type of design texture such as marble finish,
wooden, bamboo, stone finishes etc., scratch less, stain free and thickness
between 6- 8 mm 1st quality length equal to flooring stones, set over base coat
of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at
the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., complete for finished item of work,
Main Building:
Ground floor - 93.62 1173.08 1 Sqm
1st floor - 67.35 1215.50 1 Sqm
2nd floor - 98.82 1257.92 1 Sqm
3rd floor - 145.27 1300.34 1 Sqm
4th floor - 145.27 1342.77 1 Sqm
5th floor - 145.27 1385.19 1 Sqm
6th floor - 145.27 1427.61 1 Sqm
52 BLD-CSTN-9-21 - (119) : Cladding to internal walls with 8 mm thick mirror
polished granite tiles of any shade length equal to flooring stones, set over base
coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointed with white cement paste
mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., complete including seigniorage
charges, etc., complete for finished item of work
Main Building:
Final Estimate 09.01.19 12
Page 13 of 787
Main Building:
Semi Basement floor- Toilets Flooring - 23.67 1208.67 1 Sqm
Ground floor- Toilets Flooring - 286.46 1208.67 1 Sqm
1st floor - 288.56 1219.20 1 Sqm
2nd floor - 288.56 1229.74 1 Sqm
3rd Floor - 687.96 1240.27 1 Sqm
4th floor ( Area) - 687.96 1250.80 1 Sqm
5th floor ( Area) - 687.96 1261.34 1 Sqm
6th floor ( Area) - 663.39 1271.87 1 Sqm
Ladies Toilets - 61.06 1208.67 1 Sqm
54 BLD-CSTN-10-32-(155) : Supplying and fixing Gyp Board Fine Line Grid false
ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5
mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595
mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI
wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of
ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the
frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from
soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion 1028.19 1535.85 1 Sqm
fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with
galvanised spring steel level clip of PVC unversal holding clips system at 1200
mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x
595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat
complete for finished item of work as per Idia Gypsum Ltd specification. For
main building -
57 Supply and fixing of partitions made of seccolor pre-painted steel (base steel as
per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of
120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted
with a polyester paint of 12-16 microns thick alkyd backer. Section for outer
frame should be 46x52mm, section for shutter should be 46x46mm, section for
mullion should be 46x70mm, section for beading should be 18x25mm and
section for middle and bottom rail (Lock Rail and Kick Rail) of size should be
23x130mm. The partition should be paneled with 9mm pre-laminated particle
board to a height of 0.91m from the bottom, and remaining height with 5mm
191.43 5800.05 1 Sqm
thick plain glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The
sections are to be cut to length, mitre joined with corner bracket Centre mullions
are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diamine
Monomer (EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion
caps made of Glass filled nylon. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws, and complete for
Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section
should be of 46x70mm, fixed beading should be of 18x25mm, section for
shutter should be of 46x46mm and section for middle & bottom should be of
size 23x130mm.
58 BMT-U.06: Main
Supply Building: joint
of expansion Partitions in offices
filler board (GF,FF,SF)
for buildings, -
columns, beams
and slabs 50 mm THICK. For main building - 543.12 745.31 1 Sqm
59 BMT-M.78:BMT-M.78: Providing and fixing plain PVC rigid foam sheet wall
panelling of thickness 5mm consisting of panels having size 1220mm X2440mm
stuck on inner frame work of 25mm wide strips of 5mm thick PVC rigid foam
sheet. The strips should have in their centre a grove of 6mm width and 2mm
depth for sinking the head of the screw used to fix the strips to the wall and
should be placed vertically at equal intervals of 405/407mm centre to c entre.
The PVC strips shall be fixed to the wall using 65mm long M.S. screws through
the groove in the strip by using PVC fasteners. The distance between two
screws shall not be more than 300mm. a groove of 2mm may be left at the joint
15481.83 1831.47 1 Sqm
of two panels for aesthetic looks. This framework is done for making existing
wall surface in ensured level and for sticking the wall panelling sheet (panel) on
it. The exact size of the panel and correspondingly of the grid May be varied
depending n the size of the wall. However it must be ensured that a strips of
5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at
the places where two panels are joined, using solvent cement. , complete as per
direction of Engineer-in-Charge, manufacture’s specification & drawing -
60 Supplying and fixing of stainless steel hand railing as per approved drawing with
top rail of 60mm dia pipe and 2mm thick of 204 grade and 20mm dia horizontal
pipes 4 Nos and vertical posts of 35mm dia and 1.6mm thick of 204 grade at
One Metre intervals, Drilling of 36mm dia holes on steps and flooring and fixing
the Verticle pipes in the holes and filling the pipe with white cement slurry up to
required depth using bonding agent and anchor fastner and welding, buffing, 3333.46 530.58 1 Kg
polishing all members of the railing thouroughly including cost and conveyance
of all materials, electrodes, welding charges, cost of all consumables, labour
charges etc., complete for finished item of work. -
61 BLD-CSTN-8-11-(86) : RCM facia 5cm thick in CM (1:3) for drop walls, fins with
rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge
with dubara sponge finishing, including cost & conveyance of all materials to
site, seigniorage charges, sales & other taxes on all materials, operational &
incidental, cost and conveyance of cement, wire mesh, water to work site,
3.58 1928.18 1 Sqm
centering, scaffolding and form work, lift charges etc., complete for finished
items of work but excluding cost of steel & its fabrication charges, for finished
item of work. (APSS No.403 & 903). For septic tank -
62 Applying Two coats of Corroseal Epoxy Resin based Coating in one base coat
and One top coats over the thoroughly prepared interior surfaces as directed
by departmental officers, with each coat not exceeding 60 microns in dry film
thickness and total film thickness to 240 microns including cost and conveyance 7.16 100.00 1 Sqm
of all materials to site, all labour charges ,curing and all other incidental charges
etc complete for finished item of work. For septic tank -
63 Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers
and frames anywhere in A.P., F.O.R. destination including, loading, un-loading
& stacking at site but excluding central exise duty, sales tax, octroi and other 2 2799.47 1 Nos
Govt levies etc., as applicable. For septic tank -
64 Supply, delivery and fixing of 110mm dia PVC vent pipe including vent cowl,
cost of material and labour charges etc., complete for fixing it to the septic tank 10.00 300.38 1 Rmt
for 15m height above GL. For septic tank -
65 Manufacture,supply and delivery and Fixing of encapsulated plastic steps
including cost of materials packing ,loading, transportation, unloading and
stacking at site of work etc, complete including C.E.D but excluding VAT. For 16 188.60 1 Nos
septic tank -
66 Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked
conforming to IS:1729-1979 of reputed make with cement caulked joints and
fixing as per site requirements including painting black with Japan paint and
fixing with in cement mortar (1½:1) and including fixing of M.S. clamps if 55.00 1597.35 1 Rmt
necessary with required no.of Bombay nails etc., complete including earth work
excavation and refilling etc for Out let arrangement. For septic tank -
69 BMW-G.01: Providing & Placing on Terrace (at all floor levels) polyethylene
water storage tank with Double layer approved brand & manufacture with cover
and suitable locking arrangement & making necessary holes for inlet & outlets 4000.00 5.68 1 Ltr
and over flow pipes but without fittings & base support for tanks. For Toilets -
73 Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm
x 315 mm with internal flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 including cost 76.2 x 101.6
mm teak wood block and conveyance of all materials to site, labour charges 6 1095.25 1 No
etc., complete for finished item of work for all floors. For Gents Toilets -
74 Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/
Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium
Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
120 2151.87 1 No
Esso or equivalent complete with standard CI brackets including wooden
block: 550 x 400 mm - Double C.P. Pillar cock including cost and conveyance of
all materials to site, labour charges etc. complete for finished item of work. For
Toilets -
75 Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/
Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium
Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets including wooden 170 3383.45 1 No
block: 450 x 300 mm - Single C.P. Pillar cock & Supplying and Fixing
Pedestal for Wash Hand Basin (H.S.W / Parry / Earthenware) including
cost and conveyance of all materials to site, labour charges etc. complete for
finished item of work. -
76 Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/
Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium
Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets including wooden
block: 630 x 450 mm - Double C.P. Pillar cock including Premium colour 36 7210.97 1 No
Granite counter of approximate size 1000mm x 650mm including cutting of
hole, bull nosing for the front facia and around the hole etc., complete with edge
polishing (1.75 x 0.6) special specification. -
77 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265
mm x 315 mm with integral flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-
charge, 12.7mm PVC connection with brass plumber union nuts CP coated,
12.70mm push cock 1st quality of approved make including Supply & fixing 42 1308.84 1 No
31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
including cost and conveyance of all materials to site, labour charges etc.,
complete for finished item of work for all floors. -
78 Supplying & Fixing white glazed flat back Bowl urinals of size 410 x 265 x 305
mm with standard C.P. Spreader of overall size 95 x 95 x 57 mm complete
Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including Jaquar
make sensotronic concealed type flushing valve for urinal complete set with 36 17114.96 1 No
installation box with control cock, Chrome plated with 7 years warranty. -
79 Supplying & fixing 4" x 24" (101.6 x 609.6mm) white glazed porcelain channel
fixed in brick masonrywhite cement pointing including fixing in CM ( 1 1/2:1) to
the required slopes including cost and conveyance of all materials and labour 98.74 533.99 1 No
charges for finished item of work etc. complete- for Urinals. For Toilets -
80 Supplying and fixing of stainless steel sink with drain board of size 914.4 mm
x457.2mm, 1mm thick of Indian make on cantilever brackets with including
32mm C.P. waste coupling, supply & fixing 31.75 mm dia PVC flexible waste
pipe of 914.4 mm length of Ist quality ncluding chasing brick masonry wall and 4 7377.02 1 No
making good restoring to original surfaces etc., complete.for finished item of
work in all floors. -
81 S & F 152.4mm (6")x101.6mm(4") gully trap 1st class with CI grating and
constructing single brick masonry wall chamber of size 20" x 14" x 12” in CM
(1:6) prop. Over a CC (1:5:10)prop. bed, and plastering 12mm thk. in CM (1:4)
prop. both inside and outside surfaces and fitted with RCC cover 3" thick as 46 551.03 1 No
directed by Engineer-in-charge including cost and conveyance of all materials to
site, labour charges etc., complete for finished item of work. For Toilets. -
82 Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating,
black painted for all floors including cost and conveyance of all materials to site,
labour charges etc., complete for finished item of work. For Toilets. - 609 327.21 1 No
83 Supplying and fixing NP soap dish heavy type of approved make ISI quality with
NP screws etc., complete including cost and conveyance of all materials, labour
charges for fixing etc., complete for finished item of work in all floors. - 4 236.32 1 No
84 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
including cost and conveyance of all materials and labour charges etc. complete
for finished item of work .( Chrome plated / Jupiter Aqua Lines-JALor equivalent 170 1641.74 1 No
serie). -
85 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
including cost and conveyance of all materials and labour charges etc. complete
for finished item of work .( Ivory Gold / Jupiter Aqua Lines-JALor equivalent 36 2408.64 1 No
series). -
86 S & F 609.6 x 457.10 (24" x 18”) Indian make best quality glass, mirror with T.V.
shaped PVC frame plywood back with NP screws 1st quality including cost and
conveyance of all materials, labour charges etc., complete for finished item of 206 513.54 1 No
work in all floors. -
87 S & F 25mm dia 0.60 mtrs. Long aluminium anodized towel rods with brackets
etc., including cost and conveyance of all materials, labour charges etc., 112 165.88 1 No
complete for finished item of work. -
88 Supply & Fixing of Towel ring Jaquar make Queen series with 7 years
warranty: Ivory Gold / Jupiter Aqua Lines-JALor equivalent series including cost
and conveyance of all materials, labour charges etc., complete for finished item 170 2030.30 1 No
of work. -
89 Supply & Fixing of Towel rod 24 " Jaquar make Queen series Ivory gold colour
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including
cost and conveyance of all materials, labour charges etc., complete for finished 36 3173.27 1 No
item of work. -
90 Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory gold colour
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including
cost and conveyance of all materials, labour charges etc., complete for finished 36 4336.68 1 No
item of work. -
91 Supply & Fixing of Exclusive overhead shower with 190mm long light body
shower arm Jaquar make Continental series, Chrome finish with 7 years
warranty/ Jupiter Aqua Lines-JALor equivalent series including cost and 32 1725.81 1 No
conveyance of all materials, labour charges etc., complete for finished item of
work. -
92 Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm
long bend pipe with wall flange Jaquar make Continental series, Chrome finish
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including 168 4040.15 1 No
cost and conveyance of all materials, labour charges etc., complete for finished
item of work. -
93 Supply and Fixing Wall Mixer with Telephonic shower arrangement with
crutch and flexible pipe Jaquar series Ivory gold colour for bath tub. with 7
years warranty / Jupiter Aqua Lines-JALor equivalent series including cost and 36 14297.31 1 No
conveyance of all materials, labour charges etc., complete for finished item of
work. -
94 S & F tested NP bib taps at all levels of size 12.70mm dia of Indian make first
quality including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work in all floors.
300 grams (Long) - in all officer's toilets - Main Building and toilets -
285 396.52 1 No
97 Supplying & fixing GI pipe Medium Grade as per IS 1239 ISI mark in ground or
on wall including cost of tees, elbows, bends, reducers, couplings, running
joints, union flanges, unions etc. with necessary excavation in all types of soils
except rock requiring blasting, refilling, chasing masonry walls and making good
the walls & floors to the originals, surface and fixing MS clamps of TW block on
walls, including cost and conveyance of all materials and labour charges
complete for finished item of work.
99 Supplying & Fixing tested gun metal peet valve ISI mark make as approved by
Engineer, screw type 1st quality of approved type including cost and
conveyance of all materials & labour charges at all levels in all floors for
following.
a) 15mm dia peet valve - Main Building - 54 619.20 1 Nos.
b) 20mm dia peet valve - Main Building - 28 832.80 1 Nos.
c) 25mm dia peet valve - Main Building - 2398 1194.09 1 Nos.
d) For 32mm dia GI pipe - 4184 1811.02 1 No
e) For 40mm dia GI pipe - 7 2448.40 1 No
f) For 50mm dia GI pipe - 4 3584.55 1 No
g) For 65mm dia GI pipe - 2 5530.78 1 No
100 Supplying & Fixing tested gun metal Non-return valve 50mm dia. ISI mark
make as approved by Engineer, screw type 1st quality including cost and
conveyance of all materials & labour charges at all levels in all floors. For 65mm 2 2221.17 1 No
dia GI pipe -
101 Providing and placing on terrace (at all floor levels) polyetheylene water storage
tank with double layer approved brand and manufacture with cover and suitable
locking arrangement and making necessary holes for inlet and outlets and over 2000 5.68 1 Ltr
flow pipes but without fittings and base support for tanks. -
102 Construction of brick masonry support for GI pipe of size 304.80 x 228.60 x
228.60 mm in CM (1:8) prop including plastering with 12mm thick in CM (1:5)
prop including all labour charges etc. complete for finished item of work. For 130 77.26 1 No
main building and toilets -
103 Supplying and laying, filling, jointing and testing SWG pipes Ist quality with air
tight Cement joints in CM (1.5:1)prop. including excavation of trenches and
socket pits in any soil (except rock requiring blasting) and refilling with watering
and tamping to the required slope including cost and conveyance of all
materials to site and all labour charges for finished item of work (APSS NO 1301
& 1318)
Internal Electrification
Transformer
106 ELEC-6.3.5 : Supply and Transportation of copper wound Transformers
11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONANtype , Standard accessories,
winding temperature rise of 45°C/40°C first fill oil, having permissible total loss
values not exceeding 7.5%of the maximum total loss values for 11 KV as per
Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026
(Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 Described as
above with Cable box on HV side and Bus duct on LV Side , ON load Tap 1 1459952.75 1 No
changer(OLTC) With Remote Tap Change Cicuit (RTCC) & Automatic Voltage
Regulator (AVR) etc., complete and as per the following continuous rating
ake:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/ KPEL/ Powertech. 1000
KVA Transformer - Basic Rate-: ELEC-6.3.5. g -
LT CABLES
107 ELEC-4.1.1 : Supply &intallation, comisioning and testing of 10 Sqmm 4 Core
XLPE insulated, 1100V gradearmoured alluminium cable as per specification
confirmingto IS:7098 (Part - I).(Feede Tot Pole)Makes : Torrent / Universal / 3000 159.06 1 Rmt
Unicab / Polycab / Havells /Gloster / KE. 70 SqmmX 3.5 core - Basic cost,
ELEC-4.1.1.e -
108 ELEC-4.1.11: Supply &intallation, comisioning and testing Cable Glands For 4
Core 10 Sqmm : comet. 4 coreX6/10/16 Sqmm Basic Rate-b - 120 96.57 1 Nos
109 ELEC-4.1.10 :Supply and making one end termination with heavy duty double
compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type,
heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for
following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium 700 261.31 1 Nos
conductor cable of 1100 volt grade as required of size.
Makes:Dowels/Comet/SMI. 4 core x 6/10/16 sq.mm Basic Rate-l -
112 ELEC-4.1.10 :Supply and making one end termination with heavy duty double
compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type,
heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for
following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium 250 261.31 1 Nos
conductor cable of 1100 volt grade as required of size.
Makes:Dowels/Comet/SMI. 4 core x 6/10/16 sq.mm Basic Rate-l -
113 Supply &intallation, comisioning and testing of 50 Sqmm 3.5 Core XLPE
insulated, 1100Vgrade armoured alluminium cable as per
specificationconfirming to IS:7098 (Part - I).3.5 Core 50 Sqmm (For Main Panle
Incoming ) Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / 500 352.21 1 Mtr
KEI. ELEC-4.1.1. 50 SqmmX 3.5 core Basic Rate ELEC-4.1.1i -
114 ELEC-4.1.11 : Supply &intallation, comisioning and testing Cable Glands For 3.5
Core 50 Sqmm comet. 3.5 corex 50 sq.mm Basic Rate ELEC-4.1.11e - 50 181.78 1 Nos
115 ELEC-4.1.13 :Supply and making end termination with heavy Alluminium lugs
(pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape
etc of following size Makes:Dowels/Jainson/Comet. 3.5 corex 50 sq.mm Basic 300 28.40 1 Nos
Rate ELEC-4.1.13d -
116 ELEC-4.1.1Supply and transportation of following XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming to IS:7098 (Part -
I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab 300 267.00 1 Mtr
3.5 Core x35 Sqmm ELEC-4.1.1. 35SqmmX 3.5 core Basic Rate ELEC-
4.1.1h -
117 ELEC-4.1.11 Supply &intallation, comisioning and testing Cable Glands For 3.5
Core 35 Sqmm comet. 3.5core x 35 sq.mm Basic Rate ELEC-4.1.11 d - 50 170.42 1 Nos
118 ELEC-4.1.13 Supply &intallation, comisioning and testing Cable Lugs For 3.5
Core 35 Sqmm comet. 3.5 Core 35 Sqmm ELEC-4.1.13 c - 300 22.72 1 Nos
121 ELEC-4.1.13 :Supply &intallation, comisioning and testing Cable Lugs For 3.5
Core 300 Sqmm comet. 300SqmmX 3.5 core ELEC-4.1.13 k - 8 113.62 1 Nos
122 ELEC-4.1.1 Supply and transportation of following XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming to IS:7098 (Part -
I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab 200 698.73 1 Mtr
3.5 Core x120Sqmm ELEC-4.1.1. 120 SqmmX 3.5 core ELEC-4.1.1l -
123 ELEC-4.1.11 Supply &intallation, comisioning and testing Cable Glands For 3.5
Core 120 Sqmm comet. 3.5core x 120 sq.mm ELEC-4.1.11 h - 6 284.04 1 Nos
124 Supply &intallation, comisioning and testing Cable Lugs For 3.5 Core 120
Sqmm comet. 3.5core x 120 sq.mm ELEC-4.1.13 g - 24 45.45 1 Nos
PANELS
133 ELEC-3.8.1 Supply and fixing of.heavy duty LED Down lighter, suitable for
Recessed mounting made of diecast alluminium body with powder coating,
acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating
voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,
THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT:
3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS
10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting 695 1789.44 1 Nos
Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE /
NICHIA / OSRAM / SAMSUNG. 18W 18W ELEC-3.8.1e -
134 ELEC-3.8.1 : Supply and fixing of. heavy duty LED Down lighter, suitable for
Recessed mounting made of diecast alluminium body with powder coating,
acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating
voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,
THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT:
3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS
10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting 398 1562.21 1 Nos
Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE /
NICHIA / OSRAM / SAMSUNG. 12W. 12W ELEC-3.8.1c -----
136 ELEC-5.1.2 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with
double ball bearings without Regulator. Makes: Crompton HS Decora / Bajaj
Regal Star / Havells ES Plus / Orient summer crown / Usha technix decorative. 758 2613.15 1 Nos
-----
137 ELEC-5.1.12 Supply of 12" (300mm) Light duty exhaust fan with wireguard etc
complete ----- 296 3124.41 1 Nos
144 ELEC-11.1.17 Supply and fixing of 12V, 150 AH MF battery including wire
leads. Makes: Amar Raja (Power Zone) or Equivalent model of Exide / 20 13633.80 1 No
Panasonic / Gotech. ----
Lighting Protection System
145 ELEC-6.6.1 Supply and Transportation of advanced lighting protection with 205
-580mm height and 4.60 - 4.940 kgs, and having Rod length 760mm, weight
1.795 kgs with stainless steel rod, working on the principle of (ESE) Early
Streamer Emission technology, having a coverage radius of 79 Mts under level
1 protection and 107 Mtrs radius under level 4 protection when mounted on 5 -
15 mts height of existing lattice tower giving level 1 protection and
anticipation emission time 1 124976.50 1 Nos
of 60 - 72 micro seconds. The ESE should be manufactured
according to standard NFC 17-102 : 2011 and CE certified including
functional integrity etc Complete. Make : EARTHPLUS (THUNDER
GUARD) / NIMBUS / KALRE / FOREND. ----
148 ELEC-6.6.4 Supply of G.I mast of 5 Meters length, 80mm + 50mm dia,
with FRP Collar (Insulating Bush), Base Plate and supporting Guy wire 1 6589.67 1 Nos
(Stay Wire) with all fixing accessories. -
149 ELEC-6.6.5 Supply of down conductor of 1x70sqmm single core PVC insulated
unarmoured copper conductor cable of ISI mark. Makes: Finolex / 300.00 653.29 1 Mtr
Polycab / Havells / RPG / RR Kabel/KEI/Gloster/Tamra. ----
150 ELEC-6.6.6 : Supply of IEC 62561-7 compliant Eco-friendly, Maintenance free,
anti-corrosive, lead-free, super conductive, mineral based high-grade earthing
compound, To enhance soil conductivity. With resistance <0.12 ohms- meter,
Sulphur Free, Should be tested as per IEC-62561- 7 for resistance Toxic 1 2499.53 1 Nos
Elements, Leachable elements etc. 25 Kg Bag. Make: EARTHPLUS
/CIRPROTEC / INDALAC / INGESCO. ----
152 ELEC-6.6.8 Supply of Concrete Earth Pit of Dimensions: Width: 320 mm,
Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 1 1590.61 1 Nos
5000 Kgs. ---
153 ELEC-4.2.1 Supply,transporatation & installation of following sizes of Hot
Dipped Galvanized Iron perforated cable trays without cover, including
horizontal and vertical bends, reducers tees,cross members and other
accessories as required and duly suspended from the ceiling/Wall with 500.00 647.61 1 Mtr
suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with
cover). 300mm x 50mm x 1.6mm ------
160 ELEC-7.2.2 Supply of .G.I. Junction box of 2mm thick for direct acces to
cables at the inter section of Raceways. 372mm x 52mm. ----- 300.00 852.11 1 Mtr
161 ELEC-7.3.8 Supply of 100 Pair raiser cable for telephone Makes: Finolex /
Delton / Surabi / Polycab. ---- 100.00 397.65 1 Mtr
162 ELEC-7.3.12 Supply of 10 pair Telephone distribution box with back mount
frame, krone connector, powder coated metal body with lock and key 200.00 670.33 1 Mtr
arrangement. -
163 ELEC-7.3.10 Supply of 20 Pair telephone Copper wire. Makes: Finolex /
Delton / Surabi / Polycab. 500.00 79.53 1 Mtr
Earthing
Final Estimate 09.01.19 26
Page 27 of 787
164 Earthing with GI earth plate 600 mm X 600 mm X 3.6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe, with charcoal and salt as required Custom 14 4960.43 1 Nos
(Q). -
165 Providing and Laying of 8 SWG dia G.I. wire on surface or in recessfor loop
earthing along with existing surface/ concealed conduit/submain wiring/ cable as 2000.00 7.95 1 Mtr
required.
166 Providing and Laying of 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required. (Q) - 800.00 85.21 1 Mtr
167 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and
providing masonry enclosure with cover plate having locking arrangement and
watering pipe etc. with charcoal and salt as required. (Q) - 14.00 4328.73 1 Nos
168 Earthing with Copper earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe, with charcoal and salt as required Custom (Q) 14.00 14694.96 1 Nos
-
FIRE FIGHTING SYSTEMS, PUMPS & ACCESSORIES
169 ELEC-9.5.15 : Supplying, installation, testing and commissioning of electric
driven Terrace / Booster pump suitable for automatic operation and consisting of
following : complete in all respect as required.
a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze
impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45 Mtr
head conforming to IS 1520.
b) Suitable HP SQ cage induction motor TEFC type suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure,
horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation 3 63624.40 1 each
bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti vibration pads.
Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens / ABB / Kirloskar
For Booster Pump on Terrace -
b Suitable BHP, 1500 RPM water cooled with radiator, diesel engine conforming
to relevant BS & IS standard complete with auto starting mechanism, 24 Volts
electric starting equipment, diesel tank, exhaust pipe extended upto 1m. outside
pump house duly insulated with 50mm thick glass wool with 1.0mm thick
aluminium sheet cladding, residential silencer, instruments and protection as
per specification, stop solenoid for auto stop in the event of fault with audio
indications, painted with post office red colour etc. as required.
c M.S. fabricated common base plate, coupling guard, foundation bolts etc. as
required.
d Suitable cement concrete pump foundation duly plastered with ant vibration
pads.
Makes of Pumps : Kirloskar / Mather & Platt - 1 823708.75 1 Set
172 ELEC-9.5.15: Supplying, installing, testing & commissioning of electric
driven pressurisation pump (jockey pump) suitable for automatic operation
and consisting of following: complete in all respect as required :
a Horizontal type, multistage, centrifugal pump of cast iron body & bronze
impeller with stainless steel shaft, mechanical seal to ensure minimum
pressure of 3.5 kg/sq.cm. at highest and farthest outlet at
specified flow of 180 lpm at 95 m. head conforming to IS 1520.
b Suitable HP SQ cage induction motor, TEFC type suitable for operation on
415 volts, phase 50Hz. AC with IP 55 class of protection for enclosure ,
horizontal foot mounted type with class-'F' insulation, conforming toIS :325.
c M.S. fabricated common base plate, coupling guard, foundation bolts etc. as
required.
d Suitable cement concrete pump foundation duly plastered with anti vibration
pads.
Makes of Motors : Siemens/ ABB/ Kirloskar - 1 124976.50 1 Set
173 Fabricating, supplying, erection, testing and commissioning of cubicle type floor
mounted panel made from 14 CRCA Sheet complete with contactors, Auxillary
contacts, indicating lamps, Ammeters with elector switches, voltmeters with
selector switches,fuses, automatic delta type motor starter including
connections complete as required for 1 No Hydrant Pump, 1 No sprinker pump,
2 No Jockey Pump and 1 No Engine Starting Panel for Diesel Pump, 1 No
Battery charger and 1Set of Battery complete in all respect including
neccessary control wiring as per the details given below:
Incoming
1) 400 Amps, 35KA (Icu = Ics) MCCB - 1 No.
2) 0-500V Digital type Voltmeter (size 96mm x 96mm) - 1 No.
3) Indication Lamps (LED type) -1 sets (1 set of 03 Nos.RYB)
4) 0-630A Digital type Ammeters - 1 No.
5)Current transformer (300/5A) -4Nos
Rong .R.S. Masonry for outer lwalls for store
Outgoing
1) 200 Amps 25KA (Icu = Ics) MCCB, - 1Nos
2) 63 Amps 25KA (Icu = Ics) MCCB -1No
3) Fully Automatic delta starter (75 HP ) with LED illuminated ON- OFF push
button - 1 No.
4) Fully Automatic delta starter (15HP ) with LED illuminated ON- OFF push
button - 1 No.
5)Auxillary contactors for main and jockey pumps
6) Auto/ manual selector switch with control wiring for main and jockey
pump
7) Annunciator with hooter, accept/ reset push button with control wiring
All standard relays and accessories for automatic operation of diesel engine. - 1 250000.00 1 each
174 Supplying & laying the PVC insulated & sheathed FRLS Armoured cables of
1.1K.V.Aluminium Conductorin cluding supplying and making and termination
with brass compression glands:Makes: Torent / Universal / Unicab / Havells /
KEI / Gloster / Polycab
a 3.5 core x 25sq.mm ELEC-4.1.19 - 25 227.23 1 Rmt
b 3.5 core x 95 sq.mm ELEC-4.1.32 - 60 579.44 1 Rmt
ELEC-1.5.22 : Supply and laying of 2 Core x 1.5Sqmm FRLS armoured
Shielded copper cable including all taxes etc., complete of Makes fixing on
chromium plated metallic base saddles on wall as per IS 1255 and as directed 5000 16.82 1 Rmt
by the department including cost and conveyance of all materials and labour
175 charges etc., complete.Makes .Varsha/Teleflex/Orbit ----
Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm, PVC
insulated copper wires with 40 strand confirming to IS standards and 2500 148.00 1 Rmt
176 specifications. (Multi stand twisted wire) (Q) -
ELEC-1.2.4: Supplying, installing, testing and commissioning approved make
PVC conduits on ceiling / wall / floor etc. complete with accessories like, 800 15.00 1 Rmt
177 Junction boxes, Collars, Bends etc. For 25mm Dia -
178 ELEC-9.5.19 : Providing, fixing, welding joints and testing of heavy class
M.S. ERW black pipes as per relevant IS 1239/3589 with special
accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers
or welded joint with flange joints on bends, including fixing the pipe with
suitable flat iron strip clamps/brackets structural members dash
fastner,civil breakage,making good the same etc. painting with a primer
coat and two coats of postal red enamel etc. complete as required.
179 ELEC-8.4.24: Supply & fixing of fire retardant / extinguishing Electrical Insulated
synthetic mat of 2.0 mm thick + 10% conforming to latest BIS: DOC NO. ET-02
(5440) meeting requirements of IS 3043, IS 5216 (part-1, 2&3), IS 8437 and IEC
479, suitable for all voltages not exceeding 3.3 KV AC and 220 V DC supply 3 4544.60 1 Sqm
and having minimum width of 1000 mm +/- 20 mm and including supply of
required quantity of adhensive / compound and fixing the same at site as per
site requirement. -
181 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having
locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ 1 3500.00 1 Set
coke and salt as required. ( Q ). -
182 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth
electrode including connection with G.I. nut, bolt, spring, washer excavation and
re-filling etc. as required.
183 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.
184 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop
earthing along with existing surface/ recessed conduit/ submain wiring/ 50 135.00 1 Rmt
cable as required.( Q ) -
185 ELEC-9.5.21 : Supplying, fixing, testing and commissioning of butterfly valve PN
1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts,
Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
a 150 mm dia pipes and fittings complete with anti corrosive painting, wrapping
and coating of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m
including excavation and refilling the trench all complete. - 1335 200.00 1 Rmt
100 mm dia pipes and fittings complete with anti corrosive, wrapping and
b coating of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m 30 175.00 1 Rmt
including excavation and refilling the trench all complete. -
c 80 mm dia pipes and fittings complete with anti corrosive, wrapping and coating
of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including 180 125.00 1 Rmt
excavation and refilling the trench all complete. -
190 ELEC-9.5.19 : Providing, fixing, welding joints and testing of heavy class
M.S. ERW black pipes as per relevant IS 1239 / 3589 with special
accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers
or welded joint with flange joints on bends, including fixing the pipe with
suitable flat iron strip clamps /brackets structural members dash fastner,
civil breakage, making good the same etc. painting with a primer coat and
two coats of postal red enamel etc. complete as required. (for wet riser
system)
195 ELEC-9.5.29 : Supplying and fixing of hose cabinet of size 750mm X 600mm
x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass
door including necessary locking arrangement suitable to accommodate 2 Nos
15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick 32 3294.84 1 each
platform and duly painted with Post office red externally and white internally with
synthetic enamel paint complete in all respect, for external hydrant as required.
----
211 Providing, fixing, testing, commissioning of installation control valve of Cast iron
body and brass / Bronze working parts comprising of water, motor alarm, bronze
seat clapper, and clapper arm, hydraulically driven mechanical gong bell to
sound continuous alarm when the Wet riser / Sprinkler system activates,
pressure gauges, emergency releases, strainer, pressure switch, cock valve
1 9657.28 1 each
complete with drain valve and bypass , test control box, ball valves, Ms pipe of
required size, flanges, orifice plate, gasket etc of size 150mm dia as required.
Makes : HD / TYCO / NEWAGE ELEC-9.5.41
212 ELEC-9.5.21 : Manufacture, Supply and delivery of CI Wafer Lug type Butterfly
Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding
transportation, CED and taxes etc., complete. Operation done with worm
actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H- 4 3578.87 1 each
Shankar / Leader/ Zolotto / Intervalve. Water tank to pumps-2 No+Sprinkler
system-1 No+ Four way fire brigade-1 No (100mmdia)
213 ELEC-9.5.37 : Supply and fixing Flow Switches in 100mm dia MS pipe. Makes :
System Sensor / Switzer / Approved makes 4 5453.52 1 each
218 Providing, fixing, welding joints and testing of heavy class MS ERW black
pipes as per relevant IS 1239/3589 with special accessories tees, elbows,
flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange
joints on bends, including fixing the pipe with suitable flat iron strip
clamps/brackets structural members dash fastner,civil breakage,making
good the same etc. painting with a primer coat and two coats of postal
red enamel etc. complete as required. (for sprinkler system)
222 ELEC-9.4.7 : Supply and fixing of ISI mark (IS:15683) Mono ammonium
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type,
pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13
sec, controllable discharge mechanism, range min. 4 mts applicable on classes
A,B, C & electrically started fire, A rating -4 A, B rating -34 B, can construction:
Deep drawn and Co2 mig welding, Valve construction: Forging & Machining,
internal coating of can: Epoxy powder coating, External coating of Can:Epoxy 32 7384.98 1 each
polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation, all taxes and all labour
charges etc complete. Makes: Cease Fire / Minimax. Capacity 4 Kgs
223 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to
IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE
certified and fitted with ISI marked controlled valve confirming to IS:3224, high
pressure 1 Mtr discharge hose & horn complete with initial gas charged with
carrying handle with wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss
with 2 years warranty Including transportation, all taxes and all labour charges
etc complete. Makes: Cease Fire / Minimax
231 ELEC-9.2.5 : Supply and fixing of addressable wall mounting strobes cum
hooters including the cost of mounting accessories complete as per
specifications and as required including testing and commissioning including 36 5226.29 1 Each
labour charges etc complete for finished item of the work as directed by
Engineer - In - Charge. [Makes: Notifier / Edwards]. -
232 ELEC-9.2.7 : Supply and installation of addressable analogue manual call point
with resetable flexible element to initiate alaram including the cost of mounting
accessories etc. complete including labour charges etc complete for finished 36 5112.68 1 Each
item of the work as directed by Engineer - In - Charge. [Makes: Notifier /
Edwards]. ----
PA Rack
P.A. SYSTEM
237 Supplying, installing, testing and commissioning of 10 zone selector P.A.
console and with CRCA sheet housing and control desk( rack) as required.
Console shall have all call / call back facility complete with battery back up and it 2 25500.00 1 each
should also work on AC single phase power. (Q) -
238 Supplying, installing, testing and commissioning solid state Amplifier of 480 W
RMS out put in rack, including necessory control wires, jocks etc. complete.(Q) 1 62500.00 1 each
----
239 Supplying, installing, testing and commissioning solid state Amplifier of 120 W
RMS out put in rack, including necessory control wires, jocks etc. complete. (Q) 1 35000.00 1 each
----
240 Supplying, installing, testing and commissioning 5W wall mounted type
speakers with talk back facility, in CRCA sheet fabricated housing, complete.(Q) 50 2350.00 1 each
----
241 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm, PVC
insulated copper wires with 40 strand confirming to IS standards and 2000 32.00 1 Rmt
specifications. (Multi stand twisted wire) ----
242 Supplying, installing, testing and commissioning approved make PVC conduits
on ceiling / wall / floor etc. complete with accessories like, Junction boxes, 800 32.00 1 Rmt
Collars, Bends etc. For 25 mm Dia ----
Air Conditioning
Part-A AC (AIR CONDITIONING)
EQUIPMENT - V3 SERIES -1162 HP
VARAIABLE REFRIGERANT FLOW SYSTEM
243 Supply of Fujitsu GENERAL VARAIABLE REFRIGERANT FLOW SYSTEM OF
below mentioned units of below mentioned capacities comprising of inveter twin
rotatry compressor and complete with following details
a OUT DOOR UNITS
AJH162LALBH -18HP -V3 - 38 374500 1 Nos
Final Estimate 09.01.19 36
Page 37 of 787
249 Additional topping of Refrigerant 410a as per standard practice - 1100 900 1 Kgs
250 Supply,Fabrication,Installation ,testing and commissioning of GSS ducting
including all accessories and supports etc.,complete ducting supports to be
taken on wall brackets. Make:Jendel/TATA
24 G - 2000 85 1 sqft
22G - 1000 95 1 sqft
251 Supply,Installation,testing of thermal insulation of ducting with 25mm thick Al foil
faced fibre glass of density 24Kg/cum with necessary adhesive and Al jointing 1000 60 1 sqft
tape etc., all complete Make:Fiber Cell.
252 Accoutic Insulation of Intial part of supply air ducting with 12mm thick fibre glass
covered with Aluminium perforated sheet Make:Fiber cell. --- 1000 70 1 sqft
253 Supply Installing and testing of fire resistant flexible double canvas sleeve as
per approved shop drawing and specifications with zip. 5 2000 1 Nos
254 Supply and fixing of Aluminium powder coated four way supply Air Diffusers
along with volume control Dampers Make:System Air/Air Muster. 50 1050 1 sqft
255 Supply and fixing of Aluminium powder coated four way supply Air Diffusers
along with volume control Dampers Make:System Air/Air Muster. 50 950 1 sqft
258 Supplying anf fixing MS perfrated tray cabel/referagent pipe. ---- 500 1000 1 Rmt
Lift Estimation
259 Supplying and installation in the existing shaft, commissioning and final testing
and putting into operation of the Passenger lift (10 Persons / 680 Kgs) capacity
including scaffolding for errection of the lift, minor building works, cement
concrete / RCC foundation grouting etc., for equipments in machine room, lift 6 1745000.00 1 Rmt
shaft, lift pit etc., and ladder in the lift pit etc., complete with the following
features. (Make : OTIS, Johnson, Kone). ----
xix) Indicator Car & Landings: Mode Digital / Direction and position indicators in
stainless steel fixtures.
xx) False ceiling: Stainless Steel ( SS No: Hair line finish)
xxi) Flooring - Alluminium chequered plated
xxii) Safety - Infrared protection device with full height light curtain
signal(design)
xxiii) Signals(design)
a). Call registering type Micro push buttons.
b) Integral full height car operating panel with luminous bottoms.
c) Digital car position indicator combined with direction arrows, over loading
warming indicator and service cabinet.
d) Battery operated Alarm Bell of Emergency Light
e) Automatic rescue device to function during power failure and system failure
f). Lift anouncement system
xxiv) Face plate finish - Stainless steel SS No:4 Hair line finish.
xxv) Face plate shape - Rectangular
xxvi). Voltage stabilizer for control logics.
Escalators Estimation
260 Supply and Commissioning of Escalator suitable for office buildings, super
markets, and airports. The step width can be 600mm, 800mm and 1000mm.
The inclination can be 30 degree & 35 degree. The alternative function includes
VVVF, auto-lubrication & error analysis. The requirements can be customized. 2 4500000.00 1 No's
Including Transportation,Civil,Mechanical,Electrical Works, Labour Charges and
all Taxes etc,. Escalator's at Ground & First Floor. ---
CC Camera Estimation
261 Supply and Commissioning of Panasoni 2MP CCTV Camera (DOME)
Panasonic PI-HFN103L HD CCTV Camera with Night Vision (2MP) DOME
Type: IR DOME (Indoor) Resolution: 2MP Image Sensor: 1/2.9 (2MP) Lens:
3.6MM. Including Transportation,Civil Works, Labour Charges and GST(12%). 37 3892.00 1 each
--- For Semi Basement, Ground floor, First floor, Second floor and Terrace
----
265 Supply and delivery of Karma Healthcare Fighter C-MAG-F24 Standard Wheel
chair with leather-like polyester fiber material for the bottom and back and
chrome plated metal frame ideally suited for indoor use with the following
specifications:
Seat Width: 16”/18”.
Weight Capacity: 100 Kg.
Fixed armrest.
Foldable foot rest. 25 9500.00 1 each
8” solid caster.
24” solid rear wheel.
Rear wheel brakes available.
Rear solid Mag wheels. Including Transportation Charges and all Taxes. Wheel
chairs -
Ornamental Works
266 Supply and fixing of super big 3 tiers 2meters wide high k9 crystal big size
Baccarat chandelier of Size 200cm wide, 320cm height. Finish Chrome of
Lights 84(25W) including light bulbs. Chinese top crystal-K9 crystal Asfour
crystal or swarovski crystal of Voltage 110V-240V , including all taxes, labour, 2 1576955.00 1 each
transportation, maintenance and conveyance charges, etc., complete. in Hall -
267 Supply and fixing of Double Organza 3 Light 16 inch Chrome Semi Flushmount
Ceiling Light 3 light Semi Flushmount from the Double Organza collection by
Dolan Designs will enhance your home with a perfect mix of form and function.
The features include a Chrome finish applied by experts. Height: 11.25
in.,Diameter: 16.00 in, Backplate/Canopy Width: 5.00 in, Backplate/Canopy 21 8356.00 1 each
Length: 5.00 in, Backplate/Canopy Thickness: 1.12 in, Weight: 4.30 lb including
all taxes and labour and conveyance charges, etc., complete. family Lounges
----
268 Supply and Fixing of Errol 4 light crystal semi flush ceiling light. The light is fixed
to the ceiling on a circular polished chrome rose and has a short rod suspension
that carries the circular polished chrome frame. The real feature of this light is
the lavish crystal decorations which give this light its real sparkle. The bulbs
which are hidden inside the fitting provide a maximum of 160 watts of light. The
191 18000.00 1 each
bottom of this light has a small circular polished chrome diffuser secured with a
circular polished chrome nut including all taxes, labour, transportation and
conveyance charges, etc., complete. in family Lounges -
Sound Systems
269 Supply and fixing of 2-Way Speaker System with 300 Watt RMS, 38-17000Hz
Frequency Response, 93db SPL, 100V LMT, Power Tap Selection of
110/55/28W &8 Ohms Impedance Black Colour.including all taxes, labour, 14 38500 1 each
transportation, and conveyance charges, etc., complete Make:JBL,
Model:Control 29AV. ----
270 Supply and fixing 2-Zone PA Booster Amplifier with 1250+1250W Power output,
20-20000Hz Frequency Response, 2-zone line inputs & 2-zone line outputs,
.including all taxes, labour, transportation, and conveyance charges, etc., 1 227250 1 each
complete Make: CROWN, Model:DCI 2/1250. ---
271 Supply and fixing Max.10 Mic/16 Line Inputs(8mono + 4 Stereo), 4 Group Buses
+ 1 Stereo Bus, 4 AUX( Including FX), D-PRE Mic preamps with an inverted
Darlington circuit, 1 Knob Compressors, PAD Switch on Mono inputs, Phantom
Power, XLR balanced outputs .including all taxes, labour, transportation, and 1 48262 1 each
conveyance charges, etc., complete Make: YAMAHA,Model:MG16XU. ---
272 Supply and fixingMax.10 Mic/16 Line Inputs(8mono + 4 Stereo), 4 Group Buses
+ 1 Stereo Bus, 4 AUX( Including FX), D-PRE Mic preamps with an inverted
Darlington circuit, 1 Knob Compressors, PAD Switch on Mono inputs, Phantom
Power, XLR balanced outputs.including all taxes, labour, transportation, and 1 48262 1 each
conveyance charges, etc., complete Make: YAMAHA, Model:MG16XU. ---
273 Supply and fixing 1 Set consists of 4 Gooseneck Mics, VHF Wireless
Microphones, 80-15000Hz Frequency response, Each Mic operates on 2X1.5V
AAA Alkaline Cells, Unidirectional Condenser Mics, Frequency Stability 0.005%,
Audio Output0.50mV including all taxes, labour, transportation, and 1 17638 1 each
conveyance charges, etc., complete Make: AHUJA ,Model:CWM-400V. ----
274 Supply and fixing 1set Consists of One Receiver & One Gooseneck Mic, VHF
Wireless Microphone, Transmitter operates on 2X1.5V UM-3 Pencil Cells,
Frequency Response 100-12000Hz Audio Output 0-50mv FM Modulation Mode,
RF output Power 10mW.including all taxes, labour, transportation, and 2 5113 1 each
conveyance charges, etc., complete Make: AHUJA ,Model:AWM-630VG. ----
275 Supply and fixing1 set consists of One Hand Held Mic & One Collar Mic these
works on 2X1.5mV AA Cells, UHF, Frequency Response 50-15000Hz .including
all taxes, labour, transportation, and conveyance charges, etc., complete 2 7500 1 each
Make:Studio master ,Model:XR-40 duet. -----
276 Supply and fixing1 set consists WUXGA (1920X1200), 8000 Lumens
Brightness, Laser Phosphor Light Source, Motorised Zoom, Focus & Lens Shift,
24/7 Application, Free, Five Digital Inputs, 20000 Hours of operation time, 1 1228890 1 each
.including all taxes, labour, transportation, and conveyance charges, etc.,
complete Make: Hitachi, Model:CP-WU9750B. ---
277 Supply and fixing1 set consists 300"Diagonal 240"X 180" 16:9 format Wide
Screen Fixed Metal Frame with Screen.including all taxes, labour,
transportation, and conveyance charges, etc., complete Make: Custom build 1 300000 1 each
-----
278 Supply and fixing1 set consists HDMI Cable Version 2 , 4K support, VGA Cable,
AV Cable, Power Cable & Supporting Accessories.including all taxes, labour, 1 40000 1 each
transportation, and conveyance charges, etc., complete. ----
279 Providing 1 set consists DVD Player with HDMI Output & USB.including all
taxes, labour, transportation, and conveyance charges, etc., complete Make: 1 8500 1 each
Sony/Pioneer. ----
280 Supply and fixing1 set consists Two core Parallel Lead 2X1.5 Sq .mm Oxygen
Free Copper Cable Laying with PVC Pipe/Casing.including all taxes, labour, 500 160 1 Rmt
transportation, and conveyance charges, etc., complete. -----
281 Providing 1 set consistsSupporting Cable & Connectors.including all taxes,
labour, transportation, and conveyance charges, etc., complete Make:Custom 1 20000 1 set
Built. ---
IBM Value in Rs.
LS Provisions
Rs. in Crores
MUNCIPAL CORPORATION
Amount
921272.63
117537.80
18538.63
3901.78
708338.80
3930381.36
Amount
1493069.06
215143.12
1575.44
59418.44
0.00
11914974.75
17956.83
1786354.29
14200386.11
Amount
0.00
0.00
4173237.51
5145103.48
5475169.99
5446154.49
3624856.97
3741808.28
3859170.74
4323732.29
1323380.22
0.00
161699.48
89366.23
175130.71
179602.45
184054.06
132283.71
3520.31
0.00
1974501.07
452665.88
602863.40
369693.45
214732.35
101714.60
59091.16
0.00
0.00
5164541.77
Final Estimate 09.01.19 45
Page 46 of 787
Amount
4369852.38
4316631.22
1107840.82
4290467.85
793602.42
3431318.83
734794.97
3555185.63
751346.00
3634457.33
765385.06
4465117.28
600506.17
680584.21
382668.40
146752.61
146752.57
147304.18
118033.64
120529.83
122927.82
134826.20
120569.70
31337.59
64044.82
64044.82
1151372.26
0.00
2805185.94
528302.23
2622739.88
528302.19
3114689.90
566828.85
3503752.37
4075611.73
4183909.13
4292213.51
3223450.29
527673.07
3233.87
53688.81
0.00
71939.59
79455.93
83531.99
156983.12
162483.88
168207.81
114223.83
0.00
Amount
28192.53
1739.15
2227.92
4668.60
2965.30
0.00
0.00
194763.81
115114.13
1356469.67
1603527.25
1684164.14
1088437.16
1163473.47
1238501.64
1505738.50
5760.01
189488.29
0.00
0.00
129032.08
836557.92
996981.60
1396355.85
2650229.93
2888380.12
3126486.96
3166666.52
303453.11
37237.71
2312.21
0.00
0.00
713549.73
773283.99
Final Estimate 09.01.19 47
Page 48 of 787
Amount
846356.02
729768.60
787067.73
844353.76
1239790.73
69425.55
0.00
328024.19
16174.49
16174.49
25945.46
27808.94
29670.60
31534.08
33397.55
217904.40
0.00
0.00
101389.30
1877030.19
1537039.69
2088306.65
1791554.42
1922406.68
2053224.96
4173094.88
0.00
0.00
500485.88
322509.15
425925.21
454902.79
452253.27
451067.67
476555.36
564780.21
24090.38
0.00
0.00
Final Estimate 09.01.19 48
Page 49 of 787
Amount
364698.02
144403.58
163372.91
143044.91
156292.96
169527.92
158543.21
92759.40
541653.17
397219.46
528265.56
478565.12
494701.53
523210.35
851332.34
99194.35
3227873.45
4785864.76
0.00
900504.09
10243.72
0.00
1967573.10
207262.84
Amount
0.00
0.00
59180878.50
11459006.28
10883270.91
9525456.85
9711685.51
9897914.16
12032105.27
825183.98
3305355.34
465776.96
7269886.40
Amount
1080800.00
2817751.49
4790921.84
2062941.11
562995.36
Amount
148625.55
179932.90
1396600.01
0.00
3846742.72
406713.60
391873.87
287118.50
291926.31
296733.50
324966.13
0.00
0.00
112685.40
115236.54
61673.96
73831.71
77543.94
81256.17
39967.25
Amount
0.00
0.00
366463.72
348917.63
572636.82
1584122.99
1644095.41
1704081.97
1758251.43
0.00
0.00
2474739.84
2577906.74
3305536.25
1449125.65
1485813.37
1522492.43
1585107.78
0.00
0.00
7607.46
115891.06
105252.17
124557.17
198151.20
205145.53
212139.86
271266.59
90300.98
Final Estimate 09.01.19 53
Page 54 of 787
Amount
0.00
0.00
125200.96
128388.15
68880.49
82639.59
86967.37
91294.10
44978.42
0.00
0.00
27181.52
27956.25
27458.31
21663.85
22232.67
22801.49
24780.24
0.00
0.00
109821.40
81865.75
124311.43
188904.94
195068.90
201231.40
207393.90
0.00
0.00
Final Estimate 09.01.19 54
Page 55 of 787
Amount
144093.98
221143.60
232373.12
222398.21
142994.33
146878.57
150762.39
173155.22
0.00
0.00
28605.59
346236.82
351813.57
354855.00
853256.15
860500.37
867751.47
843745.84
73801.39
1579143.31
Amount
10298556.73
2845662.30
1110303.57
404795.16
Amount
28354507.19
1768668.27
6902.88
716.00
5598.94
3003.80
3017.60
Amount
87854.25
53906.37
47286.12
22720.00
75076.80
3215690.65
626854.68
6571.50
Amount
258224.40
575186.50
259594.92
54971.28
616138.56
52726.17
29508.08
Amount
25347.38
199270.89
945.28
279095.80
86711.04
105789.24
18578.56
345151.00
114237.72
156120.48
55225.92
678745.20
514703.16
Amount
0.00
113008.20
69167.28
168152.00
117005.10
0.00
183033.00
137225.60
134839.80
101970.00
91120.00
99072.00
300226.50
0.00
33436.80
23318.40
2863427.82
7577307.68
17138.80
14338.20
11061.56
4442.34
Amount
11360.00
10043.80
0.00
141721.80
71305.20
0.00
174761.55
61113.48
106016.25
0
0.00
1459952.75
0.00
477180.00
Amount
11588.40
182917.00
722010.00
5794.20
65327.50
176105.00
9089.00
8520.00
80100.00
8521.00
6816.00
151108.00
4090.16
Amount
908.96
139746.00
1704.24
1090.80
0.00
3408450.00
908920.00
3692487.50
248135.44
257678.96
190872.00
1192960.00
0.00
2674951.56
Amount
1243660.80
621759.58
582335.19
1980767.70
924825.36
0.00
2858550.00
0.00
1988280.00
745320.00
0.00
20450.00
28400.00
44310.00
81800.00
0.00
Final Estimate 09.01.19 65
Page 66 of 787
Amount
0.00
0.00
0.00
3629999.25
295399.00
738497.50
272676.00
0.00
Amount
124976.50
30676.05
16474.18
6589.67
195987.00
2499.53
181.78
1590.61
323805.00
0.00
Amount
181800.00
0.00
42038.00
49990.00
56808.00
185760.48
94982.14
88619.70
298240.00
255633.00
39765.00
134066.00
39765.00
0.00
Final Estimate 09.01.19 68
Page 69 of 787
Amount
69446.02
15900.00
68168.00
60602.22
205729.44
190873.20
0.00
0.00
0.00
0.00
0.00
727136.00
0.00
Amount
0.00
0.00
0.00
0.00
823708.75
0.00
0.00
0.00
0.00
0.00
124976.50
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Amount
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
250000.00
0.00
5680.75
34766.40
84100.00
370000.00
12000.00
0.00
23177.46
20109.84
38345.10
7953.05
5283.10
Amount
13633.80
19428.30
3500.00
0.00
0.00
6750.00
0.00
13065.73
11134.27
9316.43
3578.87
3294.84
0.00
22495.77
3862.91
50000.00
0.00
38629.10
4885.45
0.00
0.00
Amount
267000.00
5250.00
22500.00
0.00
1789436.25
159061.00
84529.56
265404.64
399924.80
83620.64
243590.56
105434.72
0.00
27949.29
Final Estimate 09.01.19 73
Page 74 of 787
Amount
21473.24
26358.68
0.00
72713.60
1013446.00
64987.80
72713.60
563530.56
0.00
0.00
0.00
97140.92
0.00
0.00
413558.60
295853.60
916185.60
2704020.00
Amount
2726.76
60989.02
34312.00
93600.00
4200.00
9657.28
14315.48
21814.08
101344.60
3976.53
16246.95
Amount
1249.77
0.00
122704.20
218140.80
173831.40
71577.00
44536.80
142929.20
231778.00
198828.00
10225.35
0.00
21814.08
30448.84
0
6155520.00
236319.36
Amount
0.00
323575.68
31000.00
36800.00
16200.00
368112.60
10907.04
13633.84
244272.25
119295.75
110000.00
188146.44
184056.48
Amount
669192.35
61750.00
47718.30
85000.00
51000.00
62500.00
35000.00
117500.00
64000.00
25600.00
14231000.00
Final Estimate 09.01.19 78
Page 79 of 787
Amount
7515200.00
1220000.00
1748600.00
0.00
106500.00
675000.00
628500.00
6915000.00
316500.00
1734400.00
3317600.00
0.00
613800.00
372600.00
1730000.00
630700.00
483600.00
11000.00
355000.00
60000.00
651000.00
315000.00
5425000.00
0.00
300000.00
70000.00
560000.00
1065000.00
990000.00
0.00
170000.00
95000.00
60000.00
Amount
70000.00
10000.00
52500.00
47500.00
1000000.00
750000.00
500000.00
10470000.00
0.00
Amount
0.00
0.00
9000000.00
0.00
144004.00
121686.00
0.00
10500000.00
0.00
4250000.00
Amount
237500.00
0.00
3153910.00
175476.00
3438000.00
0.00
539000.00
227250.00
48262.00
Amount
48262.00
17638.00
10226.00
15000.00
1228890.00
300000.00
40000.00
8500.00
80000.00
20000.00
627902002.81
75348240.34
3500000.00
627902.00
4081363.02
31395100.14
6279020.03
Amount
22792842.70
9500000.00
4081363.02
783303.00
13708697.00
799999834.05
800000000.00
80.00
BOQ 85
Page 86 of 787
BOQ 86
Page 87 of 787
BOQ 87
Page 88 of 787
Semi Basement
Columns from Cellar floor level to roof slab bottom
353.66 Cum #REF! 1 Cum
Ground Floor ( 5.1m Height )
Columns from Semi Basement Slab top level to Ground floor Slab bottom
436.02 Cum #REF! 1 Cum
First Floor ( 5.10m Height )
Columns from Ground floor slab top to First floor roof Bottom
427.40 Cum #REF! 1 Cum
Second Floor ( 4.80m Height )
Columns from First floor slab top to Second floor roof Bottom
389.37 Cum #REF! 1 Cum
Third Floor ( 3.30m Height )
Columns from 2nd floor slab top to 3rd floor roof Bottom
266.63 Cum #REF! 1 Cum
Fourth Floor ( 3.30m Height )
Columns from 3rd floor slab top to 4th floor roof Bottom
266.63 Cum #REF! 1 Cum
Fifth Floor (3.30m Height )
Columns from 4th floor slab top to 5th floor roof Bottom
266.63 Cum #REF! 1 Cum
BOQ 88
Page 89 of 787
BOQ 89
Page 90 of 787
BOQ 90
Page 91 of 787
BOQ 91
Page 92 of 787
BOQ 92
Page 93 of 787
BOQ 93
Page 94 of 787
BOQ 95
Page 96 of 787
BOQ 97
Page 98 of 787
BOQ 98
Page 99 of 787
BOQ 100
Page 101 of 787
Windows - W1
479.52 Sqm. #REF! 1 Sqm.
24 Supplying and fixing of MS Grill for windows using 25mm x 6mm MS flat alround
and 10mm MS square bars horizontally at 125mm centre to centre and vertically
at 30cm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each
side) duly making cutting brick masonry, fixing and making to original surface
neatly and painting grill with one coat of red oxide primer including and
conveyance of all materials ,cutting, bending, welding including all operational
charges and all labour charges etc., complete for finished item of work.
BOQ 101
Page 102 of 787
BOQ 102
Page 103 of 787
BOQ 103
Page 104 of 787
BOQ 104
Page 105 of 787
Ground floor
368.97 Sqm #REF! 1 Sqm
1st floor
336.91 Sqm #REF! 1 Sqm
2nd floor
531.17 Sqm #REF! 1 Sqm
3rd floor
1413.78 Sqm #REF! 1 Sqm
4th floor 1413.78 Sqm #REF! 1 Sqm
5th floor 1413.78 Sqm #REF! 1 Sqm
6th floor
1409.13 Sqm #REF! 1 Sqm
BOQ 105
Page 106 of 787
BOQ 106
Page 107 of 787
BOQ 107
Page 108 of 787
a Ground floor
15.24 Sqm #REF! 1 Sqm
1st floor
15.24 Sqm #REF! 1 Sqm
2nd floor
14.56 Sqm #REF! 1 Sqm
3rd floor
11.19 Sqm #REF! 1 Sqm
4th floor 11.19 Sqm #REF! 1 Sqm
5th floor 11.19 Sqm #REF! 1 Sqm
6th floor
11.86 Sqm #REF! 1 Sqm
BOQ 108
Page 109 of 787
BOQ 109
Page 110 of 787
BOQ 110
Page 111 of 787
Ceiling for family Lounges in 3,4 & 5 floors 1 x 3 342.89 1028.67 Sqm #REF! 1 Sqm
Ceiling for rooms in 3,4 & 5 1 x 3 1235.15 3705.45 Sqm #REF! 1 Sqm
Ceiling for family Lounges in 6th floor 1 x 1 730.86 730.86 Sqm #REF! 1 Sqm
Ceiling for room in 6 Rooms 1 x 1 48.17 48.17 Sqm #REF! 1 Sqm
BOQ 111
Page 112 of 787
All sides of the Building in GF 1 x 1 260.00 5.100 1326.00 Sqm #REF! 1 Sqm
47 Supply and fixing of partitions made of seccolor pre-painted steel (base steel as
per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120
GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick alkyd backer. Section for outer frame
should be 46x52mm, section for shutter should be 46x46mm, section for mullion
should be 46x70mm, section for beading should be 18x25mm and section for
middle and bottom rail (Lock Rail and Kick Rail) of
size should be 23x130mm. The partition should be paneled with 9mm pre-
laminated particle board to a height of 0.91m from the bottom, and remaining
height with 5mm thick plain glass With Ethyl Propylene Diamine Monomer
(EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner
bracket Centre mullions are to be fixed using mullion cap. Gaskets made of Ethyl
Propylene Diamine Monomer (EPDM). Corner brackets made of CRCA with zinc
phosphate. Mullion caps made of Glass filled nylon. The above frames should be
fixed to the concrete/masonry wall by means of self expanding screws, and
complete for Fixed Partition with Door: Outer frame section size of 46x52mm,
mullion section should be of 46x70mm, fixed beading should be of 18x25mm,
section for shutter should be of 46x46mm and section for middle & bottom should
be of size 23x130mm.
BOQ 112
Page 113 of 787
BOQ 113
Page 114 of 787
2 Nos. 9384.60 1 No
2 Supply, Installation and commissioning approved make floor mounted EWC (suit)
CASCADE model ( for colour - Grade - I ) 'P' or 'S' trap with dual flush porcelain
cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat
cover of approved make with rubber buffer and cap 15 mm angle stop cock 450
mm long PVC inter connection pipe wall flanges all of approved make etc. WS &
complete for finished item of work in all respects Colour Grade-I/Grade-II Sani.data-8
36 Nos. 17412.63 1 No
4 Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/
Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated
Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or
equivalent complete with standard CI brackets including wooden block: 550 x
400 mm - Double C.P. Pillar cock including cost and conveyance of all materials to WS &
site, labour charges etc. complete for finished item of work Sani.data-14
BOQ 114
Page 115 of 787
36 Nos. 7210.97 1 No
7 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm
x 315 mm with integral flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-
charge, 12.7mm PVC connection with brass plumber union nuts CP coated,
12.70mm push cock 1st quality of approved make including Supply & fixing 31.75
mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost
and conveyance of all materials to site, labour charges etc., complete for finished WS &
item of work for all floors. Sani.data-10
42 Nos. 1308.84 1 No
8 Supplying & Fixing white glazed flat back Bowl urinals of size 410 x 265 x 305 mm
with standard C.P. Spreader of overall size 95 x 95 x 57 mm complete Indian
make (HSW/Parry/Neycer) conforming to IS:2556-1995 including Jaquar make
sensotronic concealed type flushing valve for urinal complete set with installation WS &
box with control cock, Chrome plated with 7 years warranty. Sani.data-11
36 Nos. 17114.96 1 No
BOQ 115
Page 116 of 787
30 Nos. 551.03 1 No
12 Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating,
WS &
black painted for all floors including cost and conveyance of all materials to site,
Sani.data-5
labour charges etc., complete for finished item of work.
589 Nos. 327.21 1 No
13 Supplying and fixing NP soap dish heavy type of approved make ISI quality with
NP screws etc., complete including cost and conveyance of all materials, labour WS &
Sani.data-21
charges for fixing etc., complete for finished item of work in all floors
4 Nos. 236.32 1 No
14 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
including cost and conveyance of all materials and labour charges etc. complete WS &
Sani.data-20
for finished item of work .( Chrome plated / Jupiter Aqua Lines-JALor equivalent
serie )
170 Nos. 1641.74 1 No
15 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
WS &
including cost and conveyance of all materials and labour charges etc. complete
Sani.data-19
for finished item of work .( Ivory Gold / Jupiter Aqua Lines-JALor equivalent
series)
36 Nos. 2408.64 1 No
BOQ 116
Page 117 of 787
25 TBSP-H.I-01:Supplying and fixing of SWR PVC pipes (as per ISI standards) 4
Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single
junctions, double junctions as per site requirement, fixing with PVC clamps if
necessary with required number of Bombay nails including cost and conveyance
of all materials to site, labour charges etc.complete for finished item of work at all WS & Sani.-
floor levels. (APSS No. 1302 1319 & 1326) 43
BOQ 118
Page 119 of 787
BOQ 119
Page 120 of 787
In ordinary soils by mechanical means Upto 3 m depth% of Total quantity 359.46 Cum 223.66 1 Cum
BOQ 120
Page 121 of 787
for Levelling course below Bottom raft 14.55 Cum 3430.45 1 Cum
4 BLD-CSTN-3-14-(31) - A : Supply and placing of the M-30 Design Mix Concrete
corresponding to IS 456 using WEIGH BATCHER with 20mm size graded
machine crushed hard granite metal (coarse aggregate) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site including all operational, incidental and
labour charges such as weigh batching, machine mixing, laying concrete,
vibrating, curing, centering and suttering charges etc.,complete but excluding
seignorage charges, cost of steel and its fabrication charges for finished item of
work (APSS No. 402) with minimum cement content as per IS code for PLINTH,
PEDESTALS and FOOTINGS.
Note : 1) The cement content is adopted as 400Kg/cum for estimating purpose
only.The exact quantities will be as per mix design. 2) As per mix design, if the
cement content is found to be less than 400 Kgs/ Cum the defference in cost shall
be deducted
Data - sump
-6.a
for Bottom Raft 2 x 1 8.80 3.80 0.25 16.72
Haunch In side - for Long walls 2 x 2 8.88 0.30 0.30 3.20
Haunch In side - for Short walls 2 x 2 3.88 0.30 0.30 1.40
Say 21.32 Cum 8637.67 1 Cum
BOQ 121
Page 122 of 787
Data - sump
-8.A.b
12.72 Cum 9478.75 1 Cum
BOQ 122
Page 123 of 787
Say Rs
BOQ 123
Page 124 of 787
BOQ 125
Page 126 of 787
walls of Inlet and out let chambers 1.07 Cum 5383.19 1 Cum
10 BLD-CSTN-8-1-(76): Plastering with 12mm thick in single coat in CM (1:3)
finished smooth including cost and conveyance of all materials to site,
seigniorage charges on all materials, finishing, curing, scaffolding and all
operational, incidental, labour charges etc., including cutting grooves where ever
necessary etc., complete for finished item of work. (As per SS 903). per 10 Sqm.
BOQ 126
Page 127 of 787
2166.15 Kg 64.50 1 Kg
15 Manufacture,supply and delivery and Fixing of encapsulated plastic steps
including cost of materials packing ,loading, transportation, unloading and
stacking at site of work etc, complete including C.E.D but excluding VAT
for Septic Tanks 16 Nos 188.60 1 Nos
16 BLD-CSTN-10-25-(148): Providing impervious coat to exposed RCC roof slab
surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of
cement laid over roof when it is green including cost of all materials, seigniorage
charges, excluding conveyance charges of materials and including all operational,
incidental and labour charges for mixing mortar, laying, rendering smooth and
thread lining, curing, rounding off junctions of wall and slab etc,, complete for
finished item of work
BOQ 127
Page 128 of 787
1.20m x 0.30m panels for Inlet & outlet chamber covers 8 Nos 278.49 1 Nos
18 Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked
conforming to IS:1729-1979 of reputed make with cement caulked joints and
fixing as per site requirements including painting black with Japan paint and fixing
with in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with
required no.of Bombay nails etc., complete including earth work excavation and
refilling etc for Out let arrangement.
BOQ 128
Page 129 of 787
a Supply and fixing of CC(1:2:4) precast rings of 40mm thick, inner dia 1.50m and 12 Nos 389.05 1 Nos
height of 0.30m etc( with nominal reinforcement).
b Supply & fixing CC (1:2:4) cover 1.60m dia with nominal reinforcement 75mm 2 Nos 1482.65 1 Nos
thick and hooks for lifting (75mm thick )
23 BLD-CSTN-2-9 (17): Filling with useful available excavated earth (excluding rock)
in trenches, sides of foundations and basement with initial lead in layers not
exceeding 15 cm thick, consolidating each deposited layer by watering and
ramming including cost and conveyance of water to work site and all operational,
incidental, labour charges, hire charges of T & P etc., complete for finished item of
work. (APSS NO. 309 & 310)
filling with brick bats and Granular material 6.36 Cum 31.75 1 Cum
24 Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked
conforming to IS:1729-1979 of reputed make with cement caulked joints and
fixing as per site requirements including painting black with Japan paint and fixing
with in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with
required no.of Bombay nails etc., complete including earth work excavation and
refilling etc for Out let arrangement.
BOQ 129
Page 130 of 787
BOQ 130
Page 131 of 787
BOQ 131
Page 132 of 787
BOQ 132
Page 133 of 787
BOQ 133
Page 134 of 787
BOQ 134
Page 135 of 787
BOQ 135
Page 136 of 787
BOQ 136
Page 137 of 787
BOQ 137
Page 138 of 787
8 Nos. 551.03 1 No
31 Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating,
black painted for all floors including cost and conveyance of all materials to site,
labour charges etc., complete for finished item of work.
Toilets 13 Nos. 327.21 1 No
32 S & F tested NP bib taps at all levels of size 12.70mm dia of Indian make first
quality including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work in all floors.
in toilets 300 grams 6 Nos. 396.52 1 No
BOQ 138
Page 139 of 787
BOQ 139
Page 140 of 787
BOQ 140
Page 141 of 787
BOQ 141
Page 142 of 787
Building
S.No 24
For Columns 1.78 Cum 11800.14 1 Cum
Lintels 0.15 Cum 11734.36 1 Cum
6 BLD-CSTN-3-16-(31)-C : Supply and placing of the M-30 Design Mix Concrete
corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal (coarse aggregate) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site including all operational, incidental
and labour charges such as weigh batching, machine mixing, laying concrete,
vibrating, curing, centering, shuttering charges etc.,complete but excluding cost
of steel and its fabrication charges (APSS No. 402) with minimum cement
content as per IS code for finished item of work. for RCC SLABS, BEAMS
( using Steel Scaffolding ) Note : 1) The cement content is adopted as
400Kg/cum for estimating purpose only.The exact quantities will be as per mix
design. 2) As per mix design, if the cement content is found to be less than 400
Kgs/ Cum the defference in cost shall be deducted.
BOQ 142
Page 143 of 787
BOQ 143
Page 144 of 787
BOQ 144
Page 145 of 787
BOQ 145
Page 146 of 787
Door Frames of 0.75 x 2.10 1 ### 6 0.75 2.10 34.20 Rmt 783.95 1 Rmt
20 Providing and fixing 30mm thick WPC ( Wood Plastic Composition ) Door
Shutters as per manufacture specification fitted with Hinges, 2 Nos of 250 mm
long MS Aldrop, 2 Nos of 125 mm lond Aluminium door handle, 1 No.of 250 mm
long Aluminium tower bolt, 1 no. 250 mm long Aluminium door latch & 1 No.baby
lock including cost and conveyance of all material , all fixtures and all labour
charges etc, for fixing etc, complete.
Building
S.No 112
9.45 Sqm 4252.61 1 Sqm
21 BMS-W.19: Supplying and fixing of 7.5mm thick Aluminium Grill (as approved by
the department) 3.58 Kg/Sqm.including cost and conveyance of all material and
all labour charges etc, complete.
Building
S.No 90
Ventilators 5.40 Sqm 1069.12 1 Sqm
BOQ 146
Page 147 of 787
BOQ 147
Page 148 of 787
8 Nos. 551.03 1 No
4 Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating,
black painted for all floors including cost and conveyance of all materials to site,
labour charges etc., complete for finished item of work.
Toilets 7 Nos. 327.21 1 No
5 S & F tested NP bib taps at all levels of size 12.70mm dia of Indian make first
quality including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work in all floors.
in toilets 300 grams 6 Nos. 396.52 1 No
BOQ 148
Page 149 of 787
BOQ 149
Page 150 of 787
BOQ 150
Page 151 of 787
50 SqmmX 3.5 core Basic Rate ELEC-4.1.1i 500 Mtr 352.21 1 Mtr
9 ELEC-4.1.11 : Supply &intallation, comisioning and testing Cable Glands For 3.5
Core 50 Sqmm comet
3.5 corex 50 sq.mm Basic Rate ELEC-4.1.11e 50 Nos 181.78 1 Nos
10 ELEC-4.1.13 :Supply and making end termination with heavy Alluminium lugs
(pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape
etc of following size Makes:Dowels/Jainson/Comet
3.5 corex 50 sq.mm Basic Rate ELEC-4.1.13d 300 Nos 28.4 1 Nos
11 ELEC-4.1.1Supply and transportation of following XLPE insulated, 1100V grade
armoured alluminium cable as per specification confirming to IS:7098 (Part -
I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab
3.5 Core x35 Sqmm ELEC-4.1.1
35SqmmX 3.5 core Basic Rate ELEC-4.1.1h 300 Mtr 267 1 Mtr
12 ELEC-4.1.11 Supply &intallation, comisioning and testing Cable Glands For 3.5
Core 35 Sqmm comet
3.5core x 35 sq.mm Basic Rate ELEC-4.1.11 d 50 Nos 170.42 1 Nos
BOQ 151
Page 152 of 787
BOQ 153
Page 154 of 787
36 ELEC-5.1.12 Supply of 12" (300mm) Light duty exhaust fan with wireguard etc 296 Nos 3124.41 1 Nos
complete
WIRING AND CONDUITS
37 ELEC-1.5.1 Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm 1700 Point 1681.5 1 Point
FR PVC insulated copper conductor single core cable inexisting surface /
concealed, steel/ PVC conduit and providingand fixing earthing the point with
same cable etc. as required. Makes : Finolex / RR kabel / Havells / APAR EBXL /
KEI /L&T / V-Guard.
38 Supplying and drawing following sizes of FR PVC insulatedcopper conductor,
single core cable in the existing surface/concealed, steel/ PVC conduit/ PVC
casing caping as required. Makes : Finolex / RR kabel / Havells / APAR EBXL /
KEI /L&T / V-Guard.
a 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire 14000 Mtr 142.02 1 Mtr
b 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 4000 Mtr 186.33 1 Mtr
39 ELEC-1.2.2 Supplying and fixing of following sizes PVC conduit along with
accessories in concealed complete as required.
20mm 1000 Mtr 20.45 1 Mtr
BOQ 154
Page 155 of 787
BOQ 155
Page 156 of 787
43 ELEC-11.1.17 Supply and fixing of 12V, 150 AH MF battery including wire 20 Each 13633.8 1 Each
leads
Makes: Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic /
Gotech.
Lighting Protection System
44 ELEC-6.6.1 Supply and Transportation of advanced lighting protection with 205 1 Nos 124976.5 1 Nos
-580mm height and 4.60 - 4.940 kgs, and having Rod length 760mm, weight
1.795 kgs with stainless steel rod, working on the principle of (ESE) Early
Streamer Emission technology, having a coverage radius of 79 Mts under level 1
protection and 107 Mtrs radius under level 4 protection when mounted on 5 - 15
mts height of existing lattice tower giving level 1 protection and anticipation
emission time
of 60 - 72 micro seconds. The ESE should be manufactured
according to standard NFC 17-102 : 2011 and CE certified including
functional integrity etc Complete. Make : EARTHPLUS (THUNDER
GUARD) / NIMBUS / KALRE / FOREND
45 ELEC-6.6.2 Installation and commissioning of advanced lighting protection 1 Nos 30676.05 1 Nos
systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of GI Mast with stay wire.
6. Installation of Earth Electrodes
BOQ 156
Page 157 of 787
50 ELEC-6.6.7 Supply of Bentonite Moisture Retaining Powder 30 Kg Bag 1 Nos 181.78 1 Nos
51 ELEC-6.6.8 Supply of Concrete Earth Pit of Dimensions: Width: 320 mm, 1 Nos 1590.61 1 Nos
Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity:
5000 Kgs
52 ELEC-4.2.1 Supply,transporatation & installation of following sizes of Hot Dipped
Galvanized Iron perforated cable trays without cover, including horizontal and
vertical bends, reducers tees,cross members and other accessories as required
and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add
30% Extra for perforated cable tray with cover)
300mm x 50mm x 1.6mm 500 Mtr 647.61 1 Mtr
Data and Networking Ssytem
53 ELEC-7.1.1 Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid (Third 5000 Mtr 36.36 1 Mtr
party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler
pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds
ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing
raceways /pvc conduits including making connections to information
outlets and patch panels with ferruling at both ends for identifiation with
necessary tools for punching stripping crimping and testing required etc.,
complete. Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
54 ELEC-7.1.4 Supply installation testing and commisioning of 4 pair 23AWG
Cat6 UTP ,flexible ,double ended patch cords along with 2 nos of RJ 45
connectors with strain relief boots Compatible to T568A,T568Bspecifications
including making connections to information outlets. Makes: Systimax /AMP/
Panduit/ Siemond/ Molex/Legrand
1mtr/3 ft 200 Each 210.19 1 Each
2mtr/7 ft 200 Each 249.95 1 Each
3 mtr/10 ft 200 Each 284.04 1 Each
BOQ 157
Page 158 of 787
BOQ 158
Page 159 of 787
64 Providing and Laying of 8 SWG dia G.I. wire on surface or in recessfor loop 2000 Mtr 7.95 1 Mtr
earthing along with existing surface/ concealed conduit/submain wiring/ cable as
required.
65 Providing and Laying of 25 mm X 5 mm G.I. strip on surface or in recess for 800 Mtr 85.21 1 Mtr
connections etc. as required. (Q)
66 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and 14 Each 4328.73 1 Each
providing masonry enclosure with cover plate having locking arrangement and
watering pipe etc. with charcoal and salt as required. (Q)
67 Earthing with Copper earth plate 600 mm X 600 mm X 6 mm thick including 14 Each 14694.96 1 Each
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe, with charcoal and salt as required Custom (Q)
BOQ 159
Page 160 of 787
BOQ 160
Page 161 of 787
BOQ 161
Page 162 of 787
BOQ 162
Page 163 of 787
BOQ 163
Page 164 of 787
BOQ 164
Page 165 of 787
4 ELEC-9.5.26 : Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with
63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire,
rivets etc conforming to IS 636 (Type -A) as required. Make: Mini Max / Safex /
Newage / Winco / Padmini.
hydrant yard 64 Nos 6248.825 1 each
5 ELEC-9.5.30: Supply and fixing 63mm dia Gun metal branch pipe with 20mm
(Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903,
suitable for instantaneous connection to interconnect hose pipe coupling as
required.
hydrant yard 32 Nos 2613.145 1 each
6 ELEC-9.5.28 Supplying and fixing First -Aid Hose Reel with MS construction
spray painted in Post office Red, Conforming to Is 884 with upto date
amendments, complete with the following as required. a) 36.6 Mtr Long 20mm
(Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber
braided / Polypropylene Type - 2 as per IS:12585 .( Make: Eversafe/ Reliance/
Newage/ SRI.) b) 20mm (Nominal internal) dia gun metal globe valve and nozzle.
(Make: Newage / Winco / Padmini / Safex.) c) Drum and brackets for fixing the
equipments on wall. d) Connections from riser with 25mm dia stop valve (gun
metal)
hydrant&yard
MS pipe. 32 Nos 7612.205 1 each
BOQ 165
Page 166 of 787
9 Providing and fixing inspectors test assembly complete with 50 mm test valve,
sight glass sectional drain valve, union with corrosion resistant orifice all
complete in all respects.
10 ELEC-9.5.31 : Supply and fixing 4 way fire brigade connection of cast iron body
with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and
chain as required for 150mm dia MS pipe connection, conforming to IS 904 as
required.
a 150 mm dia 8 Nos 9089.2 1 each
11 ELEC-9.5.42: Providing and fixing suction coupling for fire brigade drawl of water 40 Nos 25336.15 1 each
from tank with 150 mm dia MS(Heavy class) pipe and foot valve (Pipe max 24 M
long) 200 mm dia
12 ELEC-9.5.32:Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS 4 Nos 16246.95 1 each
sheet, 1200mm in height with air release valve on top and flanged connection to
riser, drain arrangement with 25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with synthetic enamel paint of
approved shade as required.
13 ELEC-9.5.31 : Supply and fixing 4 way fire brigade connection of cast iron body
with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and
chain as required for 150mm dia MS pipe connection, conforming to IS 904 as
required. Make: Mini Max / Safex / Newage / Winco /Padmini.
Nos 9089.2 1 each
for Down commer pipe 8
BOQ 166
Page 167 of 787
No 17610.33 1 each
4 Nos for each floor 32
TOTAL OF HYDRANT & WET RISERS
C SPRINKLER SYSTEM
1 ELEC-9.5.19 : Providing , laying, testing & Commissioning of following
classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows,
tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes: - Jindal / Hissar /
Tata
150mmpipes
dia C class Down Commer pipe from Water tank to Cellar ( Drain water 38 Rmt 2556.34 1 Rmt
pipe)
Cellar & Stilt forSprinkler system
2 ELEC-9.5.19 : Class- C pipe from Water tank to Pump and pump to sprinkler
system on the roof 27.00m+ vertical pipe from roof to cellar 38m+ horizontal pipe
a in Cellardia
100mm 33.70m
pipe- +3 Stilt-
down37.90m
commers + 1 Wet riser ( Bld. Height- 30.00m) 260 Rmt 1590.61 1 Rmt
b 80 mm dia - C class 280 Rmt 1056.62 1 Rmt
c 50 mm dia - C class ( in Basement , Ground Floor & First & Second Floors) 1440 Rmt 636.24 1 Rmt
d 25 mm dia class- C ( in Basement , Ground Floor & First & Second Floors)) for 8500 Rmt 318.12 1 Rmt
3 sprinkler system
ELEC-9.5.39 : Supply, installation, testing and commissioning of Bourden type,
stainless steel dial type pressure gauge with isolation valve and pipe having
calibration of 0-16 kg/cm2.
Makes : HGURU / FIEBIG and Approved makes
Pressure gauge 4 Nos 681.69 1 each
4 ELEC-9.5.34 : Supply, fixing, testing and commissioning of 15mm size quartzoid
bulb type sprinklers of rating 68ºC. pendent /side wall with required
accessories.Makes: SAFEX / HD / TYCO / VIKING / NEWAGE / SHARP
(Basement 34 Nos + GF- 36 Nos, FF- 28, Sf-24) for Sprinkler system 122 Nos 499.91 1 each
5 Supply,erection, testing and commissioning of hydraulically operated sprinkler 1 Nos 34312 1 each
alarm unit connected to sprinkler system (150 mm dia) in the Stilt floor
comprising of alarm valve, water motor with alarm gong, pressure gauge, drain
cock, check valve and pressure reducing valve. The quoted rate shall also
including the necessary accessories. HD(Q)
BOQ 167
Page 168 of 787
8 Providing, fixing, testing, commissioning of installation control valve of Cast iron 1 No 9657.28 1 each
body and brass / Bronze working parts comprising of water, motor alarm, bronze
seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound
continuous alarm when the Wet riser / Sprinkler system activates, pressure
gauges, emergency releases, strainer, pressure switch, cock valve complete with
drain valve and bypass , test control box, ball valves, Ms pipe of required size,
flanges, orifice plate, gasket etc of size 150mm dia as required. Makes : HD /
TYCO / NEWAGE ELEC-9.5.41
BOQ 168
Page 169 of 787
BOQ 169
Page 170 of 787
3 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS
2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE
certified and fitted with ISI marked controlled valve confirming to IS:3224, high
pressure 1 Mtr discharge hose & horn complete with initial gas charged with
carrying handle with wheels and wall mounting bracket. Squeeze lever discharge,
used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years
warranty Including transportation, all taxes and all labour charges etc complete.
Makes: Cease Fire / Minimax
BOQ 170
Page 171 of 787
6 ELEC-9.4.17 : Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand 8 Nos 1363.38 1 each
buckets along with bucket sand, Fire buckets with round bottom type enamel
painted, white inside & red out side and letter FIRE inblack out side & Handle with
mounting bracket
7 ELEC-9.4.18 : Supply and fixing of Fire bucket stand fabricated by M.S. angles to 8 Nos 1704.23 1 each
install for two numbers of buckets as per local fire officers standards.
TOTAL OF EXTINGUISHERS
E FIRE DETECTION & ALARM SYSTEM
1 ELEC-9.2.1 : Supply, Installation, testing and commissioning of wall mounting 4 1 Nos 244272.25 1 each
loop micro processor based analog addressable fire alarm Control panel
expandable by minimum 2 additional loops with minimum 80 character LCD
display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A
C Power supply, automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and the hooters/strobes for a
minimum of 4 hours in battery condition the panel shall have suitable power
amplifiers for hooter / strobes the panel shall be capable beeing integrated with
the BMS system and shall include cost of supply, installation of any additional
modules or interfaces required for the same. The panel shall be completed as per
the specification and as required fixing of 4 loop Micro processor based Fire Alarm
control panel with zonal indictions and battery back up as per de tailed
specifications. Makes: Notifier / Edwards.
2 ELEC-9.2.3 : Supply, Installation, testing and commissioning of intellegent 1 Nos 119295.75 1 each
analogue addressable Repeater panel including the cost of mounting accessories
complete as per specification as required. Makes: Notifier / Edwards
3 Bacnet Module for BMS Connectivity ( 3600 Points)(Q) 1 Each 110000 1 Each
BOQ 171
Page 172 of 787
7 Supply, installation, testing and commissioning of intelligent addressable 10 Each 6175 1 Each
Multisensor built fault isolator feature (either in detector head or in detector base)
including the cost of base plate mounting as per specifications. Complete as
required.(Q)
8 ELEC-9.2.15:Supply and Installation of Intalligent analogue addressable Control 10 Each 4771.83 1 Each
Modules including the cost of mounting accessories complete as per
specifications and as required. Makes: Notifier / Edwards.
9 Supply, Installation, Testing & Commissioning of Fire Command Station including 1 Each 85000 1 Each
Graphical User Interface Software. The GUI based main network software shall
be capable of graphically representing each node being monitored with floor plans
and icons depicting the actual locations of the various systems; and / or sensors’
locations. Complete as required.
a.Operator work station for Fire Command Station with PC having Intel Pentium
Core -i5 Duo Processor including Serial ports (RS232) and USB ports (4 Nos )and
following accessories etc. complete with software all as specified. b. 2 Gigabytes
of RAM memory c. 500 Gigabytes of hard disk space d. DVD RW e. 19” TFT
colour monitor f. Optical Mouse with Mouse Pad g. Standard Key Board h. Latest
Windows Operating System i. Compatible Fire Alarm System Control Software j.
Laser Printer- 1 No (Model :-1020 Plus Printer(Q)
F PA Rack
P.A. SYSTEM
BOQ 172
Page 173 of 787
BOQ 173
Page 174 of 787
BOQ 174
Page 175 of 787
BOQ 175
Page 176 of 787
BOQ 176
Page 177 of 787
BOQ 177
Page 178 of 787
7 Nos
BOQ 178
Page 179 of 787
BOQ 179
Page 180 of 787
BOQ 180
Page 181 of 787
BOQ 181
Page 182 of 787
BOQ 182
Page 183 of 787
MUNCIPAL CORPORATION
#REF!
#REF!
#REF!
BOQ 183
Page 184 of 787
Amount
#REF!
#REF!
BOQ 184
Page 185 of 787
Amount
#REF!
#REF!
#REF!
BOQ 185
Page 186 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 186
Page 187 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 187
Page 188 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 188
Page 189 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 189
Page 190 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 190
Page 191 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 191
Page 192 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 192
Page 193 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 193
Page 194 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 194
Page 195 of 787
Amount
#REF!
#REF!
#REF!
BOQ 195
Page 196 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 196
Page 197 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 197
Page 198 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 198
Page 199 of 787
Amount
#REF!
#REF!
7269886.00
BOQ 199
Page 200 of 787
Amount
#REF!
#REF!
BOQ 200
Page 201 of 787
Amount
#REF!
#REF!
#REF!
#REF!
BOQ 201
Page 202 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 202
Page 203 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 203
Page 204 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 204
Page 205 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 205
Page 206 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 206
Page 207 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 207
Page 208 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 208
Page 209 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 209
Page 210 of 787
Amount
#REF!
#REF!
BOQ 210
Page 211 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
BOQ 211
Page 212 of 787
Amount
18769.00
3215691.00
626855.00
241009.00
BOQ 212
Page 213 of 787
Amount
575187.00
259595.00
54971.00
616139.00
BOQ 213
Page 214 of 787
Amount
42719.00
29508.00
16531.00
192727.00
945.00
279096.00
86711.00
BOQ 214
Page 215 of 787
Amount
105789.00
18579.00
345151.00
114238.00
156120.00
55226.00
678745.00
514703.00
BOQ 215
Page 216 of 787
Amount
108250.00
69167.00
168152.00
110681.00
122022.00
101232.00
87939.00
101970.00
91120.00
99072.00
BOQ 216
Page 217 of 787
Amount
300227.00
14861.00
14990.00
2856263.00
7577308.00
17139.00
14338.00
11062.00
4442.00
11360.00
9271.00
BOQ 217
Page 218 of 787
Amount
115954.00
71305.00
174762.00
61113.00
98949.00
20657953.00
206.58 Lakhs
80397.00
BOQ 218
Page 219 of 787
Amount
14542.00
49913.00
184155.00
BOQ 219
Page 220 of 787
Amount
369693.00
214732.00
120570.00
BOQ 220
Page 221 of 787
Amount
151899.00
471947.00
1374.00
50737.00
1709959.00
1709959.00
17.10 Lakhs
BOQ 221
Page 222 of 787
Amount
22053.00
3997.00
22847.00
BOQ 222
Page 223 of 787
Amount
55972.00
101715.00
59091.00
31338.00
3234.00
BOQ 223
Page 224 of 787
Amount
6903.00
5760.00
12255.00
716.00
5599.00
BOQ 224
Page 225 of 787
Amount
3004.00
139717.00
3018.00
11123.00
BOQ 225
Page 226 of 787
Amount
2228.00
47921.00
7464.00
545955.00
1798.00
BOQ 226
Page 227 of 787
Amount
1372.00
4669.00
2965.00
202.00
39934.00
BOQ 227
Page 228 of 787
Amount
1217.00
52157.00
598112.00
5.98 Lakhs
6644.94
1950.89
23395.67
BOQ 228
Page 229 of 787
Amount
0.00
22371.57
8978.42
29830.73
BOQ 229
Page 230 of 787
Amount
21004.25
1760.15
64044.82
26844.40
BOQ 230
Page 231 of 787
Amount
26953.18
23643.06
869.57
94744.14
BOQ 231
Page 232 of 787
Amount
18618.85
34712.77
16174.49
5917.68
6709.66
5121.86
BOQ 232
Page 233 of 787
Amount
22120.44
106760.40
5460.64
BOQ 233
Page 234 of 787
Amount
26811.09
40187.16
5773.25
BOQ 234
Page 235 of 787
Amount
45150.49
36900.70
1156.10
11360.00
741971.00
28153.80
BOQ 235
Page 236 of 787
Amount
6571.50
8607.48
4408.24
4253.73
2379.12
BOQ 236
Page 237 of 787
Amount
12883.80
3162.30
30505.50
17996.80
23450.40
9288.00
4164.00
3582.27
7067.75
BOQ 237
Page 238 of 787
Amount
10006.97
386.30
176868.00
918839.00
918839.00
9.19 Lakhs
6644.94
1950.89
BOQ 238
Page 239 of 787
Amount
23395.67
22371.57
8978.42
29830.73
BOQ 239
Page 240 of 787
Amount
21004.25
1760.15
64044.82
26844.40
BOQ 240
Page 241 of 787
Amount
26953.18
23643.06
869.57
94744.14
BOQ 241
Page 242 of 787
Amount
18618.85
34712.77
16174.49
5917.68
6709.66
5121.86
BOQ 242
Page 243 of 787
Amount
22120.44
106760.40
5460.64
BOQ 243
Page 244 of 787
Amount
26811.09
40187.16
5773.25
BOQ 244
Page 245 of 787
Amount
45150.49
36900.70
1156.10
11360.00
741971.00
BOQ 245
Page 246 of 787
Amount
28153.80
8607.48
4408.24
2290.47
2379.12
BOQ 246
Page 247 of 787
Amount
12883.80
3162.30
30505.50
17996.80
23450.40
9288.00
4164.00
3582.27
386.30
151258.00
BOQ 247
Page 248 of 787
Amount
893229.00
893229.00
8.93 Lakhs
1459953
477180
11588
182917
BOQ 248
Page 249 of 787
Amount
722010
5794
65328
176105
9089
8520
80100
8521
BOQ 249
Page 250 of 787
Amount
6816
151108
4090
909
139746
1704
1091
3408450
908920
1033897
1033897
1033897
147700
443099
BOQ 250
Page 251 of 787
Amount
248135
257679
190872
1192960
2674952
1243661
BOQ 251
Page 252 of 787
Amount
621760
582335
1980768
924825
2858550
1988280
745320
20450
BOQ 252
Page 253 of 787
Amount
28400
44310
81800
3629999
295399
BOQ 253
Page 254 of 787
Amount
738498
272676
124977
30676
16474
BOQ 254
Page 255 of 787
Amount
6590
195987
2500
182
1591
323805
181800
42038
49990
56808
BOQ 255
Page 256 of 787
Amount
185760
94982
88620
298240
255633
39765
134066
39765
BOQ 256
Page 257 of 787
Amount
69446
15900
68168
60602
205729
3531156
38265308.00
Rs 382.65 Lakhs
BOQ 257
Page 258 of 787
Amount
190873
727136
BOQ 258
Page 259 of 787
Amount
823709
124977
BOQ 259
Page 260 of 787
Amount
250000
5681
34766
84100
370000
12000
BOQ 260
Page 261 of 787
Amount
23177
20110
38345
7953
5283
13634
19428
3500
6750
13066
11134
9316
3579
BOQ 261
Page 262 of 787
Amount
3295
22496
3863
50000
38629
4885
2921685
600750
10500
49500
BOQ 262
Page 263 of 787
Amount
1789436
159061
84530
265405
399925
83621
243591
BOQ 263
Page 264 of 787
Amount
105435
27949
21473
26359
72714
1013446
64988
72714
BOQ 264
Page 265 of 787
Amount
563531
5654928
97141
413559
295854
916186
2704020
2727
60989
34312
BOQ 265
Page 266 of 787
Amount
93600
4200
9657
14315
21814
101345
3977
BOQ 266
Page 267 of 787
Amount
16247
1250
122704
218141
173831
71577
44537
142929
231778
198828
10225
21814
30449
6058006
BOQ 267
Page 268 of 787
Amount
6155520
236319
323576
31000
36800
BOQ 268
Page 269 of 787
Amount
16200
368113
10907
13634
7192069
244272
119296
110000
BOQ 269
Page 270 of 787
Amount
188146
184056
669192
61750
47718
85000
1709430
BOQ 270
Page 271 of 787
Amount
51000
62500
35000
117500
64000
25600
355600
23891718.00
23891718.00
238.92 Lakhs
14231000.00
7515200.00
1220000.00
1748600.00
BOQ 271
Page 272 of 787
Amount
106500.00
675000.00
628500.00
6915000.00
316500.00
1734400.00
3317600.00
613800.00
372600.00
1730000.00
630700.00
483600.00
11000.00
42250000.00
42250000.00
355000.00
60000.00
651000.00
315000.00
5425000.00
BOQ 272
Page 273 of 787
Amount
300000.00
70000.00
560000.00
1065000.00
990000.00
170000.00
95000.00
60000.00
70000.00
10000.00
52500.00
47500.00
1000000.00
750000.00
500000.00
12546000.00
12546000
54796000
Rs 547.96 Lakhs
BOQ 273
Page 274 of 787
Amount
10470000.00
BOQ 274
Page 275 of 787
Amount
628200
11098200.00
110.98 Lakhs
9000000
9000000
Rs 90.00 Lakhs
144004.00
121686.00
265690.00
BOQ 275
Page 276 of 787
Amount
500000.00
765690.00
Rs 7.66 Lakhs
6000000
6000000.00
Rs 60.00 Lakhs
4250000
237500
4487500
BOQ 276
Page 277 of 787
Amount
Rs 44.88 Lakhs
3153910
175476
3438000
6767386
Rs 67.67 Lakhs
539000
BOQ 277
Page 278 of 787
Amount
227250
48262
48262
17638
10226
15000
1228890
BOQ 278
Page 279 of 787
Amount
300000
40000
8500
80000
20000
2583028
258303
25000
2866331
28.66 Lakhs
#REF!
#REF!
35.00
#REF!
#REF!
#REF!
#REF!
#REF!
95.00
#REF!
#REF!
BOQ 279
Page 280 of 787
Amount
#REF!
#REF!
#REF!
BOQ 280
Page 283 of 787
a 200mm thick @ Semi basement roof slab at 3.60m Height 596.26 Cum #REF! 1 Cum #REF!
b Ground floor Roof slab at 5.10m Height 492.70 Cum #REF! 1 Cum #REF!
c 200mm thick @ 1st floor roof slab 486.70 Cum #REF! 1 Cum #REF!
d 250mm thick @ 1st floor roof slab 134.25 Cum #REF! 1 Cum #REF!
e 200mm thick @ 2nd floor roof slab 466.54 Cum #REF! 1 Cum #REF!
f 250mm thick @ 2nd floor roof slab 92.40 Cum #REF! 1 Cum #REF!
g 150mm thick @ 3rd floor roof slab- S1 slab 335.49 Cum #REF! 1 Cum #REF!
h 225mm thick @ 3rd floor roof slab- S2 Slab 83.16 Cum #REF! 1 Cum #REF!
i 150mm thick @ 4th floor roof slab- S1 slab 339.51 Cum #REF! 1 Cum #REF!
j 225mm thick @ 4th floor roof slab- S2 Slab 83.38 Cum #REF! 1 Cum #REF!
k 200mm thick @ 5th floor roof slab 339.51 Cum #REF! 1 Cum #REF!
l 225mm thick @ 5th floor roof slab 83.38 Cum #REF! 1 Cum #REF!
m 200mm thick @ 6th floor roof slab 456.14 Cum #REF! 1 Cum #REF!
n 225mm thick @ 6th floor roof slab 64.24 Cum #REF! 1 Cum #REF!
o 150mm thick @ Terrace floor 55.97 Cum #REF! 1 Cum #REF!
a Brick wall for Portico Basement 36.18 Cum #REF! 1 Cum #REF!
b Brick Masonry steps for Portico Basement 21.38 Cum #REF! 1 Cum #REF!
c Ground Floor ( 225mm Thick Walls) - 251.98 Cum #REF! 1 Cum #REF!
d 1st floor - Outer walls 256.86 Cum #REF! 1 Cum #REF!
e 2nd floor - Outer walls 249.81 Cum #REF! 1 Cum #REF!
f 3rd floor - Outer walls 150.32 Cum #REF! 1 Cum #REF!
g 4th floor - Outer walls 150.32 Cum #REF! 1 Cum #REF!
h 5th floor - Outer walls 150.32 Cum #REF! 1 Cum #REF!
i 6th floor - Outer walls 172.31 Cum #REF! 1 Cum #REF!
12 BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement solid
blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks using flyash of
80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and
conveyance of all materials, labour charges, scaffolding and curing etc., cpomplete with a
compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls.
a Semi Basement floor- Toilets Flooring 7.08 sqm #REF! 1 sqm #REF!
b Ground floor- Toilets Flooring 107.86 Sqm #REF! 1 Sqm #REF!
c 1st Floor 94.23 Sqm #REF! 1 Sqm #REF!
d 2nd Floor 107.44 Sqm #REF! 1 Sqm #REF!
e 3rd Floor 164.88 Sqm #REF! 1 Sqm #REF!
f 4th Floor 164.88 Sqm #REF! 1 Sqm #REF!
g 5th Floor 164.88 Sqm #REF! 1 Sqm #REF!
h 6th Floor 204.11 Sqm #REF! 1 Sqm #REF!
a Semi Basement floor- Toilets Flooring 23.67 Sqm #REF! 1 Sqm #REF!
b Ground floor- Toilets Flooring 286.46 Sqm #REF! 1 Sqm #REF!
c 1st floor 288.56 Sqm #REF! 1 Sqm #REF!
a Ceiling for family Lounges in 3,4 & 5 floors 1028.67 Sqm #REF! 1 Sqm #REF!
b Ceiling for rooms in 3,4 & 5 3705.45 Sqm #REF! 1 Sqm #REF!
c Ceiling for family Lounges in 6th floor 730.86 Sqm #REF! 1 Sqm #REF!
d Ceiling for room in 6 Rooms 48.17 Sqm #REF! 1 Sqm #REF!
a Supply and fixing of CC(1:2:4) precast rings of 40mm thick, inner dia 1.50m and height of
0.30m etc( with nominal reinforcement). 12 Nos 389.05 1 Nos 4669.00
b Supply & fixing CC (1:2:4) cover 1.60m dia with nominal reinforcement 75mm thick and
hooks for lifting (75mm thick ) 2 Nos 1482.65 1 Nos 2965.00
1 No 1459952.75 1 No 1459953
LT CABLES
2 ELEC-4.1.1 : Supply &intallation, comisioning and testing of 10 Sqmm 4 Core XLPE
insulated, 1100V gradearmoured alluminium cable as per specification confirmingto
IS:7098 (Part - I).(Feede Tot Pole)Makes : Torrent / Universal / Unicab / Polycab / 3000 Rmt 159.06 1 Rmt 477180
Havells /Gloster / KE (70 SqmmX 3.5 core )
3 ELEC-4.1.11: Supply &intallation, comisioning and testing Cable Glands For 4 Core 10
Sqmm : comet , (4 coreX6/10/16 Sqmm) 120 Nos 96.57 1 Nos 11588
4 ELEC-4.1.10 :Supply and making one end termination with heavy duty double
compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty
Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of
Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt
grade as required of size. Makes:Dowels/Comet/SMI (4 core x 6/10/16 sq.mm )
700 Nos 261.31 1 Nos 182917
5 ELEC-4.1.1 :Supply &intallation, comisioning and testing of 16 Sqmm 4 Core XLPE
insulated, 1100V gradearmoured alluminium cable as per specification confirmingto
IS:7098 (Part - I).(Feede Tot Pole)Makes : Torrent / Universal / Unicab / Polycab /
Havells /Gloster / KE ELEC-4.1.1 (16 SqmmX 4 core) 4100 Mtr 176.1 1 Mtr 722010
a 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire 14000 Mtr 142.02 1 Mtr 1988280
b 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 4000 Mtr 186.33 1 Mtr 745320
39 ELEC-1.2.2 Supplying and fixing of following sizes PVC conduit along with accessories in
concealed complete as required.
a 20mm 1000 Mtr 20.45 1 Mtr 20450
b 25mm 1000 Mtr 28.4 1 Mtr 28400
c 32mm 1000 Mtr 44.31 1 Mtr 44310
d 50mm 1000 Mtr 81.8 1 Mtr 81800
Generator
40 ELEC-10.1.1 Supply, Transportation, erection and commissioning (ExcludingFoundation)
of 3 Phase, 415, 50Hz, water cooled multi cylinderdiesel generator set with alternator of
KVA/ KW out putcontineous rating directly coupled Engine and Alternator with guardand
mounted on a common base plate of Robust construction andcomplete with standard
control panel having IP-52 protection,Acoustic Enclosure as per CPCB norms , sound
absorbing material,t to restrict sound level up to 75 dB up to 1 mtr distance and as
perCPCB norms etc as per following specifications mentioned below
B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra /Greaves Cotton Diesel
Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic
governing soas to enable the alternator to give - - - - -KVA continuous output at0.8 P.F.
lagging at NTP conditions. The diesel engine shall becapable of providing 10% O/L for 1
Hr for every 11 Hrs of continuousrunning at full load. The engine with 1st filling of oil and
Diesel etc.01. Exhaust pipe of required size and length with insulation as perthe site
condition with alluminium clading.02. Diesel tank suitable for 8 to 12 Hours running
capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer
standards (500KVA Makes:Cummins/Koel Green/Sterling)
1 Nos 3629999.25 1 Nos 3629999
a 150 mm dia pipes and fittings complete with anti corrosive painting, wrapping and coating
of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including excavation
and refilling the trench all complete. 1335 Rmt 450 1 Rmt 600750
100 mm dia pipes and fittings complete with anti corrosive, wrapping and coating of the
b pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including excavation and refilling
the trench all complete. 30 Rmt 350 1 Rmt 10500
c 80 mm dia pipes and fittings complete with anti corrosive, wrapping and coating of the
pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including excavation and refilling
the trench all complete. 180 Rmt 275 1 Rmt 49500
2 ELEC-9.5.19 : Providing, fixing, welding joints and testing of heavy class M.S. ERW
black pipes as per relevant IS 1239 / 3589 with special accessories tees, elbows,
flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on
bends, including fixing the pipe with suitable flat iron strip clamps /brackets
structural members dash fastner, civil breakage, making good the same etc. painting
with a primer coat and two coats of postal red enamel etc. complete as required. (for
wet riser system)
a 150 mm dia 700 Rmt 2556.3375 1 Rmt 1789436
b 100 mm dia 100 Rmt 1590.61 1 Rmt 159061
BOQ (2) 345
Page 346 of 787
1. IBM-Total 363
Page 364 of 787
A Main Building
Pile cap 1355.92 Cum 8549.05 1 Cum
Plinth Beams 153.39 Cum 11168.26 1 Cum
Piles 2313.65 Cum 6020.96 1 Cum
1. IBM-Total 364
Page 365 of 787
1. IBM-Total 365
Page 366 of 787
1. IBM-Total 366
Page 367 of 787
1. IBM-Total 367
Page 368 of 787
1. IBM-Total 368
Page 369 of 787
13 BLD-CSTN-8-10 - (85): Plastering 12mm thick two coats with base coat of 8mm
thick in C.M. (1:5) and top coat of 4mm thick in C.M. (1:4) with dubara sponge
finishing including cost & conveyance of all materials like cement, Sand , Water,
etc., to site, all operational, including charges, labour charges for mixing mortar,
finishing, scaffolding, lift charges, curing , including cutting grooves where ever
necessary etc., complete for finished item of work.
1. IBM-Total 369
Page 370 of 787
1. IBM-Total 370
Page 371 of 787
1. IBM-Total 371
Page 372 of 787
1. IBM-Total 372
Page 373 of 787
1. IBM-Total 373
Page 374 of 787
1. IBM-Total 374
Page 375 of 787
1. IBM-Total 375
Page 376 of 787
1. IBM-Total 376
Page 377 of 787
1. IBM-Total 377
Page 378 of 787
1. IBM-Total 378
Page 379 of 787
1. IBM-Total 379
Page 380 of 787
1. IBM-Total 380
Page 381 of 787
1. IBM-Total 381
Page 382 of 787
Ceiling for room in 3,4&5 floors family Lounge 1 x 3 342.89 1028.67 Sqm 1868.00 1 Sqm
Ceiling for room in 3,4&5 Rooms 1 x 3 1235.15 3705.45 Sqm 1868.00 1 Sqm
Ceiling for room in 6 floors family Lounge 1 x 1 730.86 730.86 Sqm 1868.00 1 Sqm
Ceiling for room in 6 Rooms 1 x 1 48.17 48.17 Sqm 1868.00 1 Sqm
42 BLD-CSTN-9-21-(119) : Cladding to External walls with Sand Stone like
( BANSIPAHARPUR STONE ) (1200 X 600 ) 30MM THK CLADDING as approved
by Engineer-in-charge of length not less than 2.43mts using cement compatible
bonding agent having acrylic emulsion base set over 12mm thick CM (1:5) base
coat and neat grey cement slurry of honey like consistency spread at the rate of
3.3 kg.s per sq.mt including fixing with MS clits with anticorrosive coating hold
fasts and using Janatha paste and jointed with white cement paste mixed with
pigment of matching shade to match the shade of granite slabs including cost and
conveyance of all materials and water to work site, including all operational,
incidental, and labour charges such as mixing mortar, fixing in position,
including lift charges, curing, including cutting the brick masonry walls and
redoing the same such that the top surface of tiles is to be flushed with plastered
surface etc., complete for finished item of work.(APSS No.701 & 707)
All sides of the Building in GF 1 x 1 260.00 5.100 1326.00 Sqm 2146.05 1 Sqm
1. IBM-Total 382
Page 383 of 787
44 BMT-U.06: Supply of expansion joint filler board for buildings, columns, beams
and slabs 50 mm THICK
1. IBM-Total 383
Page 384 of 787
46 Supplying and fixing of stainless steel hand railing as per approved drawing with
top rail of 60mm dia pipe and 2mm thick of 204 grade and 20mm dia horizontal
pipes 4 Nos and vertical posts of 35mm dia and 1.6mm thick of 204 grade at One
Metre intervals, Drilling of 36mm dia holes on steps and flooring and fixing the
Verticle pipes in the holes and filling the pipe with white cement slurry up to
required depth using bonding agent and anchor fastner and welding, buffing,
polishing all members of the railing thouroughly including cost and conveyance of
all materials, electrodes, welding charges, cost of all consumables, labour
charges etc., complete for finished item of work.
Data-Bld-
Sn.110
3333.46 Kg 530.58 1 Kg
Cost of Building Rs.
GST @ 12%
Say
1. IBM-Total 384
Page 385 of 787
MUNCIPAL CORPORATION
883763.00
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
3969166.00
1. IBM-Total 385
Page 386 of 787
Amount
1174723.00
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
48329.00
11591828.00
1713099.00
13930390.00
1. IBM-Total 386
Page 387 of 787
Amount
3587944.00
5529367.00
5465027.00
5440974.00
3572730.00
3688755.00
3805189.00
4298040.00
1315742.00
79890.00
80589.00
88757.00
173966.00
178438.00
182890.00
131467.00
2653108.00
449715.00
714408.00
5062321.00
4244003.00
4241895.00
1095944.00
4216335.00
785414.00
3374212.00
727425.00
3497064.00
743957.00
4305016.00
757996.00
4389773.00
1. IBM-Total 387
Page 388 of 787
Amount
594813.00
435462.00
1145785.00
378753.00
145251.00
145251.00
145859.00
140289.00
119395.00
121793.00
133606.00
2579980.00
2739843.00
2964848.00
3202236.00
3943417.00
3574998.00
3569368.00
3200788.00
451037.00
135846440.00
#REF!
#REF!
#REF!
#REF!
#REF!
71538.00
79012.00
83089.00
156180.00
161682.00
1. IBM-Total 388
Page 389 of 787
Amount
167406.00
113697.00
832604.00
5309.00
#REF!
#REF!
#REF!
191934.00
113442.00
1579101.00
2000040.00
1945447.00
1420088.00
1517988.00
1615878.00
1932624.00
12316542.00
#REF!
#REF!
#REF!
#REF!
1. IBM-Total 389
Page 390 of 787
Amount
141238.00
870078.00
1055567.00
1493792.00
2932114.00
3195594.00
3459027.00
3191808.00
347528.00
16686746.00
#REF!
1. IBM-Total 390
Page 391 of 787
Amount
574726.00
755066.00
861264.00
899173.00
796070.00
858574.00
921065.00
939921.00
381517.00
1886374.00
1565732.00
2088307.00
1839946.00
1974333.00
2108685.00
4186975.00
1. IBM-Total 391
Page 392 of 787
Amount
500486.00
322509.00
425925.00
454903.00
452253.00
451068.00
476555.00
521862.00
371600.00
160833.00
173568.00
156041.00
170493.00
184930.00
190520.00
587216.00
401658.00
528266.00
485847.00
502428.00
531382.00
853359.00
2581603.00
1. IBM-Total 392
Page 393 of 787
Amount
5663324.00
887085.00
1889620.00
1. IBM-Total 393
Page 394 of 787
Amount
67500208.00
14850574.00
14450482.00
13072566.00
13330400.00
13590158.00
11024827.00
1. IBM-Total 394
Page 395 of 787
Amount
2345543.00
6328386.00
1056800.00
1. IBM-Total 395
Page 396 of 787
Amount
2894422.00
2714734.00
1. IBM-Total 396
Page 397 of 787
Amount
378059.00
562042.00
1. IBM-Total 397
Page 398 of 787
Amount
115598.00
153953.00
14433.00
1396600.00
499652.00
293880.00
2763318.00
406714.00
391874.00
287119.00
1. IBM-Total 398
Page 399 of 787
Amount
291926.00
296734.00
324966.00
112685.00
115237.00
61674.00
73832.00
77544.00
81256.00
39967.00
366464.00
348918.00
572637.00
1584123.00
1644095.00
1704082.00
1758251.00
1. IBM-Total 399
Page 400 of 787
Amount
3298204.00
2577907.00
3305536.00
1449126.00
1485813.00
1522492.00
1585108.00
6780.00
103285.00
94239.00
112001.00
178880.00
185874.00
192870.00
1. IBM-Total 400
Page 401 of 787
Amount
383955.00
125201.00
128388.00
68880.00
82640.00
86967.00
91294.00
44978.00
27182.00
25850.00
26567.00
27283.00
27999.00
28716.00
29432.00
1. IBM-Total 401
Page 402 of 787
Amount
57182.00
81866.00
124311.00
188905.00
195069.00
201231.00
207394.00
144094.00
221144.00
232373.00
222398.00
142994.00
146879.00
150762.00
173155.00
1. IBM-Total 402
Page 403 of 787
Amount
28606.00
346237.00
351814.00
354855.00
853256.00
860500.00
867751.00
843746.00
1579143.00
1. IBM-Total 403
Page 404 of 787
Amount
1921556.00
6921781.00
1365239.00
89982.00
2845662.00
1. IBM-Total 404
Page 405 of 787
Amount
1110304.00
404795.00
1. IBM-Total 405
Page 406 of 787
Amount
21286119.00
1768668.00
457796635.00
0.00
457796635.00
4577.97 Lakhs
1. IBM-Total 406
Page 407 of 787
1. IBM-Build 407
Page 408 of 787
1. IBM-Build 408
Page 409 of 787
Piles
2313.65 Cum #REF! 1 Cum #REF!
7 Supply and placing of the VRCC M25 Grade Design Mix Concrete correspoinding
to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate) from approved quarry including
cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including all operational, incidental and labour
charges such as weight batching, machine mixing, laying concrete, curing etc.,
complete but excluding cost of steel and its fabrication charges for finished item of
work (APSS No 402) with minimum cement content as per IS code from standard
suppliers approved by the department including pumping, centering, shuttering,
laying concrete, vibrating, curing etc. complete for finished item of work. for
Columns and Walls
Semi Basement
306.36 Cum #REF! 1 Cum #REF!
Ground Floor ( 5.1m Height )
472.13 Cum #REF! 1 Cum #REF!
First Floor ( 5.10m Height )
429.58 Cum #REF! 1 Cum #REF!
1. IBM-Build 409
Page 410 of 787
1. IBM-Build 410
Page 411 of 787
Semi Basement Roof slab at 3.60m Height 590.50 Cum #REF! 1 Cum #REF!
Ground floor Roof slab at 5.10m Height 483.34 Cum #REF! 1 Cum #REF!
1st floor Roof slab at 5.10m Height 483.10 Cum #REF! 1 Cum #REF!
250MM thick 134.25 Cum #REF! 1 Cum #REF!
2nd floor Roof slab at 4.80m Height 462.94 Cum #REF! 1 Cum #REF!
250mm thick @ 2nd floor roof slab 92.40 Cum #REF! 1 Cum #REF!
3rd floor Roof slab at 3.30m Height
150mm thick @ 3rd floor roof slab- S1 slab 332.79 Cum #REF! 1 Cum #REF!
83.16 Cum #REF! 1 Cum #REF!
4th floor Roof slab at 3.30m Height 336.81 Cum #REF! 1 Cum #REF!
83.38 Cum #REF! 1 Cum #REF!
5th floor Roof slab at 3.30m Height 452.54 Cum #REF! 1 Cum #REF!
83.38 Cum #REF! 1 Cum #REF!
6th floor Roof slab at 3.60m Height 452.54 Cum #REF! 1 Cum #REF!
64.24 Cum #REF! 1 Cum #REF!
Terrace Floor - 7th floor 31.04 Cum #REF! 1 Cum #REF!
Terrace Floor - 7th floor dome 63.05 Cum #REF! 1 Cum #REF!
Stair case Ground 44.18 Cum #REF! 1 Cum #REF!
200mm thick from Ground Floor ( to 1st floor) 16.94 Cum #REF! 1 Cum #REF!
200mm thick from 1st Floor ( to 2nd floor)
200mm thick from 1st Floor ( to 2nd floor) 16.94 Cum #REF! 1 Cum #REF!
200mm thick from 2nd Floor ( to 3rd floor) 16.31 Cum #REF! 1 Cum #REF!
1. IBM-Build 411
Page 412 of 787
1. IBM-Build 412
Page 413 of 787
1. IBM-Build 413
Page 414 of 787
1. IBM-Build 414
Page 415 of 787
1. IBM-Build 415
Page 416 of 787
1. IBM-Build 416
Page 417 of 787
1. IBM-Build 417
Page 418 of 787
1. IBM-Build 418
Page 419 of 787
1. IBM-Build 419
Page 420 of 787
1. IBM-Build 420
Page 421 of 787
1. IBM-Build 421
Page 422 of 787
Semi Basement floor- Toilets Flooring 7.08 sqm #REF! 1 sqm #REF!
Ground floor- Toilets Flooring 107.86 Sqm #REF! 1 Sqm #REF!
1st floor 94.23 Sqm #REF! 1 Sqm #REF!
2nd floor 107.44 Sqm #REF! 1 Sqm #REF!
3rd Floor 164.88 Sqm #REF! 1 Sqm #REF!
4th floor ( Area) 164.88 Sqm #REF! 1 Sqm #REF!
5th floor ( Area) 164.88 Sqm #REF! 1 Sqm #REF!
1. IBM-Build 422
Page 423 of 787
1. IBM-Build 423
Page 424 of 787
1. IBM-Build 424
Page 425 of 787
Semi Basement floor- Toilets Flooring 23.67 Sqm #REF! 1 Sqm #REF!
Ground floor- Toilets Flooring 286.46 Sqm #REF! 1 Sqm #REF!
1st floor 288.56 Sqm #REF! 1 Sqm #REF!
2nd floor 288.56 Sqm #REF! 1 Sqm #REF!
3rd Floor 687.96 Sqm #REF! 1 Sqm #REF!
4th floor ( Area) 687.96 Sqm #REF! 1 Sqm #REF!
5th floor ( Area) 687.96 Sqm #REF! 1 Sqm #REF!
6th floor ( Area) 663.39 Sqm #REF! 1 Sqm #REF!
40 BLD-CSTN-10-32-(155) : Supplying and fixing Gyp Board Fine Line Grid false
ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5
mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595
mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall
angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling
screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work
using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220
mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners &
connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring
steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the
12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x
1195 mm and finishing two coats of drywall topcoat complete for finished item of
work as per Idia Gypsum Ltd specification.
data-bldg -
Sn - 95
1028.19 Sqm #REF! 1 Sqm #REF!
1. IBM-Build 425
Page 426 of 787
Ceiling for room in 3,4&5 floors family Lounge 1028.67 Sqm #REF! 1 Sqm #REF!
Ceiling for room in 3,4&5 Rooms 3705.45 Sqm #REF! 1 Sqm #REF!
Ceiling for room in 6 floors family Lounge 730.86 Sqm #REF! 1 Sqm #REF!
Ceiling for room in 6 Rooms 48.17 Sqm #REF! 1 Sqm #REF!
42 BLD-CSTN-9-21-(119) : Cladding to External walls with Sand Stone like
( BANSIPAHARPUR STONE ) (1200 X 600 ) 30MM THK CLADDING as approved
by Engineer-in-charge of length not less than 2.43mts using cement compatible
bonding agent having acrylic emulsion base set over 12mm thick CM (1:5) base
coat and neat grey cement slurry of honey like consistency spread at the rate of
3.3 kg.s per sq.mt including fixing with MS clits with anticorrosive coating hold
fasts and using Janatha paste and jointed with white cement paste mixed with
pigment of matching shade to match the shade of granite slabs including cost and
conveyance of all materials and water to work site, including all operational,
incidental, and labour charges such as mixing mortar, fixing in position,
including lift charges, curing, including cutting the brick masonry walls and
redoing the same such that the top surface of tiles is to be flushed with plastered
surface etc., complete for finished item of work.(APSS No.701 & 707)
1. IBM-Build 426
Page 427 of 787
44 BMT-U.06: Supply of expansion joint filler board for buildings, columns, beams
and slabs 50 mm THICK
1. IBM-Build 427
Page 428 of 787
46 Supplying and fixing of stainless steel hand railing as per approved drawing with
top rail of 60mm dia pipe and 2mm thick of 204 grade and 20mm dia horizontal
pipes 4 Nos and vertical posts of 35mm dia and 1.6mm thick of 204 grade at One
Metre intervals, Drilling of 36mm dia holes on steps and flooring and fixing the
Verticle pipes in the holes and filling the pipe with white cement slurry up to
required depth using bonding agent and anchor fastner and welding, buffing,
polishing all members of the railing thouroughly including cost and conveyance of
all materials, electrodes, welding charges, cost of all consumables, labour
charges etc., complete for finished item of work.
Data-Bld-
Sn.110
3333.46 Kg #REF! 1 Kg #REF!
Cost of Building Rs. #REF!
Say #REF!
1. IBM-Build 428
Page 430 of 787
S.N Description of Item Qty Rate Per Amount Main Building Sump
4 BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-
Upto 3 m depth for foundations and depositing on bank for all lifts and with an
initial lead of 10m including all operational, incidental, labour charges such as
shoring ,sheeting, planking, strutting, etc. complete for finished item of work 0.00 0.00
including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS
308).
Main Building - Total of Augoring #REF! Rmt #REF! 1 Rmt #REF! #REF! 0.00
6 BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level :
Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse
aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost
and conveyance of all materials like cement, sand, coarse aggregate water etc.,
0.00 0.00
to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers,
finishing top surface to the required level curing etc., complete for finished item of
work for foundation and under flooring bed.
Main Building For Pile caps #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
Sump #REF! Cum #REF! 1 Cum #REF! 0.00 #REF!
Septic Tank #REF! Cum #REF! 1 Cum #REF! 0.00 0.00
Gents toilets #REF! Cum #REF! 1 Cum #REF! 0.00 0.00
Ladies Toilets #REF! Cum #REF! 1 Cum #REF! 0.00 0.00
Total of Plain Cement concrete nominal mix (1:4:8) prop #REF! Cum #REF! 0.00 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
7 BLD-CSTN-2-8 (16) : Filling with Gravel in trenches, sides of foundations and
basement with initial lead in layers not exceeding 15 cm thick, consolidating each
deposited layer by watering and ramming including cost and conveyance of water
to work site and all operational, incidental, labour charges, hire charges of T & P 0.00 0.00
etc., complete for finished item of work. (APSS NO. 309 & 310)
Total ofTotal of Gravel filling - Main Building #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
8 Reffling with excavated useful soils including sand/Gravel (where rock cutting is
done) with standard specification after the pipe lline is laid jointing and tested as 0.00 0.00
directed by the departmental officer including breaking clods etc, complete.
S.N Description of Item Qty Rate Per Amount Main Building Sump
Pile cap 36.45 0.00 0.00
Pile cap 194.40 0.00 0.00
Pile cap 14.16 0.00 0.00
Pile cap 245.70 0.00 0.00
Pile cap 280.80 0.00 0.00
Pile cap 311.04 0.00 0.00
Pile cap 28.43 0.00 0.00
Pile cap 117.00 0.00 0.00
a Pile cap in Main Building - #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
b Raft in Sump #REF! Cum #REF! 1 Cum #REF! 0.00 #REF!
c Raft in Septic tank #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
d Gents Toilets Footings #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
e Ladies Toilets Footings #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of -Footings & Rafts #REF! Cum #REF!
Gents Toilets Pedastals #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Ladies Toilets Pedastals #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of Pedastals #REF! #REF! #REF! 0.00 0.00
a Plinth Beams in Main Building - #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
Gents Toilets Plinth Beams #REF! Cum #REF! 1 ### #REF! 0.00 0.00
Ladies Toilets Plinth Beams #REF! Cum #REF! 1 ### #REF! 0.00 0.00
#REF! Cum #REF! 0.00 0.00
11 DESIGN MIX CONCRETE (WEIGH BATCH at SITE) for Cast-in-Situ piles: ( M-25
Mix ) - Supply and placing of the Design Mix Concrete corresponding to IS 456
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate (sand) coarse aggregate,
water etc., to site and including all operational, incidental and labour charges such
as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., 0.00 0.00
complete but excluding cost of steel and its fabrication charges for finished item of
work (APSS No. 402)with minimum cement content as per IS code from standard
suppliers approved by the department including tremmy pumping, laying concrete,
curing etc. complete for finished item of work.
Total of Piles in Main Building #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
12 Supply and placing of the VRCC M25 Grade Design Mix Concrete correspoinding
to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate) from approved quarry including
cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including all operational, incidental and labour
charges such as weight batching, machine mixing, laying concrete, curing etc.,
complete but excluding cost of steel and its fabrication charges for finished item of 0.00 0.00
work (APSS No 402) with minimum cement content as per IS code from standard
suppliers approved by the department including pumping, centering, shuttering,
laying concrete, vibrating, curing etc. complete for finished item of work. for
Columns and Walls
S.N Description of Item Qty Rate Per Amount Main Building Sump
Lintels in Ladies Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of Lintels #REF! Cum #REF!
c Walls
Retaining wall of main building #REF! Cum #REF! 1 Cum #REF!
Lift Walls of main building #REF! Cum #REF! 1 Cum #REF!
Water tank long walls of main building #REF! Cum #REF! 1 Cum #REF!
Walls in Main Building : #REF! Cum #REF! #REF! 0.00
b Sump Walls ( without centering) #REF! #REF! #REF! ### ### #REF! 0.00 #REF!
Sump Wall centering charges #REF! #REF! #REF! ### ### #REF! 0.00 #REF!
Septic tank Walls ( without centering) #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Septic tank Wall centering charges #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Walls in Sump & ST #REF! Cum #REF!
Total of Walls #REF! Cum #REF!
13 Supply and placing of the VRCC M25 Grade Design Mix Concrete correspoinding
to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate) from approved quarry including
cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site, taxes on all materials including all operational,
incidental and labour charges such as weigh batching, machine mixing, laying
concrete, curing etc., but excluding cost of steel and its fabrication charges for
finished item of work (APSS No 402) with minimum cement content as per IS
code from standard suppliers approved by the department including pumping,
centering, shuttering, laying concrete, vibrating, curing etc. complete for finished
item of work. for Slabs and Beams
S.N Description of Item Qty Rate Per Amount Main Building Sump
5th floor Roof slab at 3.30m Height - 200mm thick #REF! Cum #REF! 1 Cum #REF!
5th floor- 225mm thick roof slab- #REF! Cum #REF! 1 Cum #REF!
6th floor Roof slab at 3.60m Height - 200mm thick #REF! Cum #REF! 1 Cum #REF!
6th floor- 225mm thick roof slab- #REF! Cum #REF! 1 Cum #REF!
Terrace Floor -Head room #REF! Cum #REF! 1 Cum #REF!
200mm thick Stair case Ground #REF! Cum #REF! 1 Cum #REF!
200mm thick from Ground Floor ( to 1st floor) #REF! Cum #REF! 1 Cum #REF!
200mm thick from 1st Floor ( to 2nd floor) #REF! Cum #REF! 1 Cum #REF!
200mm thick from 2nd Floor ( to 3rd floor) #REF! Cum #REF! 1 Cum #REF!
200mm thick at 3rd floor #REF! Cum #REF! 1 Cum #REF!
200mm thick at 4th floor #REF! Cum #REF! 1 Cum #REF!
200mm thick at 5th floor #REF! Cum #REF! 1 Cum #REF!
200mm thick at 6th floor #REF! Cum #REF! 1 Cum #REF!
Roof slabs-in Main Building : #REF! Cum #REF! #REF! 0.00
Roof slabs in Sump ( 150mm thick ) #REF! Cum #REF! ### ### #REF! 0.00 #REF!
Roof slabs in Septic tank ( 125mm thick ) #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Roof slabs in Gents Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Roof slabs in Ladies Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of RCC slabs #REF! Cum #REF!
Total of Terrace dome in main building #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
Beams in main Building
Roof Beams- Basement #REF! Cum #REF! 1 Cum #REF!
Ground Floor #REF! Cum #REF! 1 Cum #REF!
1st Floor #REF! Cum #REF! 1 Cum #REF!
2nd Floor #REF! Cum #REF! 1 Cum #REF!
3rd Floor #REF! Cum #REF! 1 Cum #REF!
4th Floor #REF! Cum #REF! 1 Cum #REF!
5th floor #REF! Cum #REF! 1 Cum #REF!
6th floor #REF! Cum #REF! 1 Cum #REF!
7th Floor #REF! Cum #REF! 1 Cum #REF!
Roof Beams in Main Building : #REF! Cum #REF! #REF! 0.00
Roof beams in Septic tank #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Roof beams in Gents Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
Roof beams in Ladies Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of Roof Beams #REF! Cum #REF!
Sun shades
Ground Floor #REF! Sqm #REF! 1 Sqm #REF!
1st Floor #REF! Sqm #REF! 1 Sqm #REF!
2nd Floor #REF! Sqm #REF! 1 Sqm #REF!
3rd Floor #REF! Sqm #REF! 1 Sqm #REF!
4th Floor #REF! Sqm #REF! 1 Sqm #REF!
5th Floor #REF! Sqm #REF! 1 Sqm #REF!
6th Floor #REF! Sqm #REF! 1 Sqm #REF!
Total of Sun shades in Main Building : #REF! Sqm #REF! #REF! 0.00
14 BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level: Plain Cement
concrete nominal mix m-20 (Cement : fine aggregate: coarse aggregate ) using
20mm size Hard Granite Machine Crushed Graded Metal including cost and
conveyance of all materials like cement, sand, coarse aggregate water etc., to site
, labour charges , for mixing , laying, concrete , ramming in 15 cm layers,
finishing top surface to the required level curing etc., complete for finished item of
work with nomonal reinforcement
Main Building : Bed blocks #REF! Cum #REF! 1 Cum #REF! #REF! 0.00
Gents toilets #REF! Cum #REF! 1 Cum #REF! 0.00 0.00
Ladies Toilets #REF! Cum #REF! 1 Cum #REF! 0.00 0.00
1.20m x 0.30m panels for Inlet & outlet chamber covers #REF! Nos #REF! 1 Nos #REF! 0.00 0.00
Precast rings of 40mm thick, inner dia #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
1.60m dia cover cover with nominal reinforcement 75mm thick #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Total of CC M-20 #REF! Cum #REF!
15 BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement
solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks
using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust
including cost and conveyance of all materials, labour charges, seiniorage
charges, scaffolding and curing etc., cpomplete with a compresive strength not
lessthan 50 kg/sqm for walls for Superstructure Walls. ( External walls only )
Main Building :
S.N Description of Item Qty Rate Per Amount Main Building Sump
Brick wall - Basement #REF! Cum #REF! 1 Cum #REF!
Steps #REF! Cum #REF! 1 Cum #REF!
Ground Floor ( 225mm Thick Walls) - #REF! Cum #REF! 1 Cum #REF!
1st Floor outer walls #REF! Cum #REF! 1 Cum #REF!
2nd Floor outer walls #REF! Cum #REF! 1 Cum #REF!
3rd floor - Outer walls #REF! Cum #REF! 1 Cum #REF!
4th floor - Outer walls #REF! Cum #REF! 1 Cum #REF!
5th floor - Outer walls #REF! Cum #REF! 1 Cum #REF!
6th floor - Outer walls #REF! Cum #REF! 1 Cum #REF!
Total of 225mm thick Brick masonry in main building #REF! Cum #REF! #REF! 0.00
16 BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement
solid blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks
using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust
including cost and conveyance of all materials, labour charges, scaffolding and
curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for
walls for Superstructure Walls.
Main Building :
Semi Basement Floor #REF! Cum #REF! 1 Cum #REF!
Ground floor #REF! Cum #REF! 1 Cum #REF!
1st floor #REF! Cum #REF! 1 Cum #REF!
2nd floor #REF! Cum #REF! 1 Cum #REF!
3rd floor #REF! Cum #REF! 1 Cum #REF!
4th floor #REF! Cum #REF! 1 Cum #REF!
5th floor #REF! Cum #REF! 1 Cum #REF!
6th floor #REF! Cum #REF! 1 Cum #REF!
7th floor #REF! Cum #REF! 1 Cum #REF!
Total of 100mm thick Brick masonry in main building #REF! Cum #REF! #REF! 0.00
17 BLD-CSTN-5-1 (39): Brick Masonary 2nd Class Ground moulded or treditional
size 23x11x7 Cm in Cement Mortor 1:3 Prop including Cost & conveyance of all
Materials like Cement, Sand, Bricks, Water, etc., to site including all labour 0.00 0.00
charges like mixing Cement Mortor, scaffoding charges lift charges , curing
charges etc., complete for finished item of work
Septic Tank- Brick Masonary -23x11x7 Cm in Cement Mortor 1:3 Prop #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
18 BLD-CSTN-5-4-(42): Brick Masonary 2nd Class Ground moulded or treditional
size 23x11x7 Cm in Cement Mortor 1:6 Prop including Cost & conveyance of all
Materials like Cement, Sand, Bricks, Water, etc., to site including all labour 0.00 0.00
charges like mixing Cement Mortor, scaffoding charges lift charges , curing
charges etc., complete for finished item of work
Gents toilets #REF! Cum #REF! 1 ### #REF! 0.00 0.00
Ladies Toilets #REF! Cum #REF! 1 ### #REF! 0.00 0.00
Total of Brick Masonary -23x11x7 Cm in Cement Mortor 1:6 Prop #REF! Cum #REF! 0.00 0.00
19 BLD-CSTN-5-11 (49): 11.5 cm wide Brick masonry for super-structure on ground
floor in cm (1:3) using second class traditional size bricks including cost of all
materials,, labour and all operations for constructing half brick masonry, mixing 0.00 0.00
cement mortar, curing etc., complete for finished item of work.
S.N Description of Item Qty Rate Per Amount Main Building Sump
1st floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
2nd floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
3rd floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
4th floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
5th floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
6th floor #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
Plastering 20mm thick two coats -16mm C.M. (1:6) 4mm in C.M. (1:3) #REF! sqm #REF! #REF! 0.00
22 BLD-CSTN-8-6-(81): Plastering with 15mm thick in single coat in CM (1:4)
finished smooth including cost and conveyance of all materials to site, finishing,
curing, scaffolding and all operational, incidental, labour charges etc., including 0.00 0.00
cutting grooves where ever necessary etc., complete for finished item of work.
(As per SS 903).
S.N Description of Item Qty Rate Per Amount Main Building Sump
Inner walls - Third floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Inner walls - Fourth floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Inner walls - Fifth floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Inner walls - Sixth floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Plastering 12mm thick two coats -8mm C.M. (1:5) 4mm in C.M. (1:4) #REF! Sqm #REF! #REF! 0.00
25 BLD-CSTN-8-1-(76) : Plastering with 12mm thick in single coat in CM (1:3)
finished smooth including cost and conveyance of all materials to site, finishing,
curing, scaffolding and all operational, incidental, labour charges etc., including 0.00 0.00
cutting grooves where ever necessary etc., complete for finished item of work.
(As per SS 903). per 10 Sqm.
S.N Description of Item Qty Rate Per Amount Main Building Sump
external walls - 5th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
external walls - 6th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling - Ground floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling- 1st floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling - 2nd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling - 3rd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling - 4th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls & Ceiling- 5th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Internal walls& Ceiling - 6th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Total of Priming Coat #REF! Sqm #REF! #REF! 0.00
26 Painting to new walls with 2 coats of synthetic polymer luxury plastic emulsion
paint of superior grade having VOC after thoroughly brushing the surface to
remove all dirt and remains of loose powdered materials, including cost and 0.00 0.00
conveyance of all materials to work site and all operational, incidental, labour
charges etc. complete for finished item of work as per SS 911 for internal walls
Main Building : internal walls #REF! Sqm #REF! 1 Sqm #REF! #REF! 0.00
27 TBSC-G.VI-01 : Providing and applying Exterior grade Texture ready mixed paint
with sand texture added sand particles Acrylic copolymers and mineral
compounds, bactericides and various additives. of average 2 to 3 mm thickness
over plastered surface to prepare the surface even and smooth after thoroughly
brushing the surface to remove all dirt and remains of loose powdered materials,
applying emery paper, Sand the surface, clean & wipe off loose dust, applying 0.00 0.00
putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the
surface preparation including cost and conveyance of all materials to work site
and all operational, incidental, labour charges etc. complete for finished item of
work for external walls
Main Building : external walls #REF! Sqm #REF! 1 Sqm #REF! #REF! 0.00
28 BLD-CSTN-11-5-(162) : White washing two coats with whiting of approved quality
to give an even shade after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials including cost of all materials, labour 0.00 0.00
charges and incidental such as scaffolding, lift charges etc., complete for finished
item of work,
Main Building :Ceiling Plastering #REF! Sqm #REF! 1 Sqm #REF! #REF! 0.00
Gents toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
Ladies Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
#REF! Sqm #REF! 0.00 0.00
29 BLD-CSTN-11-8-(164) : Colour washing two coats with approved Colour and
quality to give an even shade after thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials including cost of all materials, labour 0.00 0.00
charges and incidental such as scaffolding, lift charges etc., complete for finished
item of work.
a Gents toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
b Ladies Toilets #REF! #REF! #REF! 1 ### #REF! 0.00 0.00
#REF! Sqm #REF! 0.00 0.00
30 BLD-CSTN-10-25-(148): Providing impervious coat to exposed RCC roof slab
surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of
cement laid over roof when it is green including cost of all materials, all
operational, incidental and labour charges for mixing mortar, laying, rendering 0.00 0.00
smooth and thread lining, curing, rounding off junctions of wall and slab etc,,
complete for finished item of work
S.N Description of Item Qty Rate Per Amount Main Building Sump
Ground floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
1st floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
2nd floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
3rd Floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
4th floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
5th floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
6th floor #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
#REF! Kg #REF! #REF! 0.00
b Sump #REF! Kg #REF! 1 Kg #REF! 0.00 #REF!
c Septic tank #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
d Gents toilets #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
f Ladies Toilets #REF! Kg #REF! 1 Kg #REF! 0.00 0.00
#REF! Kg #REF! 0.00 0.00
32 BMT-P.68 : Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC)
sliding windows three track - two glass shutters sliding and one mesh shutter - 80-
Series duly manufactured using UPVC reinforced profiles of 80 mm x 52 mm x
2.25 mm for outer frames, 54 mm x 38 mm x 2.25 mm for sliding shutter frames
capable of mounting single glazing system structurally reinforced with hot
dip galvanized up to 50 microns of minimum thickness of 1.2 mm
prefabricated & welded through fusion welding the window sash shall be fitted
with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be
52 mm x 21.5 mm x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly 0.00 0.00
fixed with EPDM weathering seal resistant accessories like clipping locking
system made of aluminium 1 No., per set of sashes and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site with templates for casement
sizing complete for finished item of work
S.N Description of Item Qty Rate Per Amount Main Building Sump
33 Providing GFRC designed Pannels with fibre reinforced pre-cast concrete with
50-50 sand cement matrix in a typical wall thickness of 50mm. Hallow rib profiles
created around the perimeter and across the rear face at designed centres. For
windows and elevation including cost and conveyance of all material and all 0.00 0.00
labour charges as per standerd practice and as directed by the engineer-in-
charge
Main Buiding :Main Doors -MD - at GF Main Entrance #REF! Nos #REF! 1 Nos #REF! #REF! 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
35 BMT-N.58 : Providing and fixing door frames fabricated from sections made of
galvanized steel powder coated (base steel as per IS 513, galvanised as per IS
277 with zinc of 120 grams / square metre), the factory made section are powder
coated with pure polyester powder of 50-60 microns thick with total coated
thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate
of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket
in the frame section, frame section filled with polyurethane foam, cut to length,
and joined by way of welding, each frame provided with: a) 2mm thick MS powder 0.00 0.00
coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for double
shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c) 40 mm x
200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos. with split end tail. d)
Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No
S.N Description of Item Qty Rate Per Amount Main Building Sump
37 BMT-N.04: Providing and fixing 30mm thick “RAJSHRI” or Equivalent BRAND
FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER
consisting of frame made out of MS. Tubes of 19gauge thickness and size of
19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS.
Frame shall have a coat of steel primers of approved make and manufacture. MS.
Frame covered with 5mm thick heat moulded “Rajshri” single side Prelam Pac ‘C’
channel of size 30mmX50mm to form stiles.5mm thick& 75mm wide single side
prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of 5mm
thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front
(prelam side) stiles and rails (which should have a 5mm 45 bent portion as
beading) and attached to the back(white/ivory) stiles and rails which should have 0.00 0.00
a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac
sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be
joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of
20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent
cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be
fitted as gap insert for top and bottom rail etc. complete as per direction of
Engineer –in-Charge, manufacture specification and drawing
S.N Description of Item Qty Rate Per Amount Main Building Sump
39 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA
laths, interlocked together through their entire length and jointed together at the
ends by end-locks, mounted on specially designed pipe shaft of 50mm dia
nominal bore MS B class pipe with brackets, plates, guide channels, stoppers,
bottom locking plates and arrangements for inside & outside locking with push- 0.00 0.00
pull operations including cost of hood cover and springs complete, painted with
one coat of approved steel primer, locks, ball bearings, all accessories etc
complete for finished item of work as per special spn: 1108
S.N Description of Item Qty Rate Per Amount Main Building Sump
1st floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
2nd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
3rd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
4th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
5th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
6th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Total of Granite Flooring #REF! Sqm #REF! #REF! 0.00
43 BLD-CSTN-9-1-(99) : Flooring with Polished Shabad stones 1st class 15 to 18
mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid
CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency
spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost
0.00 0.00
of all materials like cement, sand, and water and flooring stones etc., complete,
including labour charges for dressing of flooring stones etc., complete for finished
item of work, including the cost and conveyance of all materials.
S.N Description of Item Qty Rate Per Amount Main Building Sump
1st floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
2nd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
3rd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
4th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
5th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
6th floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Total of 600 x 600 Tile Flooring #REF! Sqm #REF! #REF! 0.00
45 BLD-CSTN-9-5-(103) : Flooring with Nano polished soluble salt porcelain vitrified
tiles screen printed of size 800 x 800 mm and thickness between 9-11 mm 1st
quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any
colour and finish in all shades and designs set over base coat of cement mortar
(1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat
cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed 0.00 0.00
neatly with white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, sand water and tiles etc.,
complete, for finished item of work, including the cost and conveyance of all
materials.
S.N Description of Item Qty Rate Per Amount Main Building Sump
Main Building: 0.00 0.00
Semi Basement floor- Toilets Flooring #REF! sqm #REF! 1 sqm #REF! 0.00 0.00
Ground floor- Toilets Flooring #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
1st floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
2nd floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
3rd Floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
4th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
5th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
6th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
#REF! Sqm #REF! #REF! 0.00
Gents Toilets #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Ladies Toilets #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Total of Non-Skid Tile Flooring #REF! Sqm #REF! 0.00 0.00
47 BLD-CSTN-9-23-(121): Providing skirting to internal walls to 15 cm height/risers of
steps with 15 to 18 mm thick polished Shahabad stone length equal to flooring
stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointed with white 0.00 0.00
cement paste mixed with pigment of matching shade to full depth, including cost
of all materials like Shahabad stone, cement, sand and water etc., complete for
finished item of work, including the cost and conveyance of all materials.
S.N Description of Item Qty Rate Per Amount Main Building Sump
48 BLD-CSTN-9-21 - (119) : Providing skirting to internal walls to 15 cm height /
risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring
stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointed with white
0.00 0.00
cement paste mixed with pigment of matching shade to full depth, including cost
of all materials like tiles, cement, sand and water etc., complete for finished item
of work
S.N Description of Item Qty Rate Per Amount Main Building Sump
50 BLD-CSTN-9-21 - (119) : Cladding to internal walls with 8 mm thick mirror
polished granite tiles of any shade length equal to flooring stones, set over base
coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, 0.00 0.00
cement, sand and water etc., complete including seigniorage charges, etc.,
complete for finished item of work
S.N Description of Item Qty Rate Per Amount Main Building Sump
3rd Floor #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
4th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
5th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
6th floor ( Area) #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
#REF! Sqm #REF! #REF! 0.00
Gents Toilets #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Ladies Toilets #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
Total of Tile Dadooing #REF! Sqm #REF! 0.00 0.00
52 BLD-CSTN-10-32-(155) : Supplying and fixing Gyp Board Fine Line Grid false
ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5
mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595
mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall
angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling
screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work
using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220
mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & 0.00 0.00
connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring
steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the
12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x
1195 mm and finishing two coats of drywall topcoat complete for finished item of
work as per Idia Gypsum Ltd specification.
S.N Description of Item Qty Rate Per Amount Main Building Sump
53 #REF!
#REF! #REF!
Main Building: All sides of the Building in GF #REF! Sqm #REF! 1 Sqm #REF! #REF! 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
55 Supply and fixing of partitions made of seccolor pre-painted steel (base steel as
per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120
GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick alkyd backer. Section for outer frame
should be 46x52mm, section for shutter should be 46x46mm, section for mullion
should be 46x70mm, section for beading should be 18x25mm and section for
middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The
partition should be paneled with 9mm pre-laminated particle board to a height of
0.91m from the bottom, and remaining height with 5mm thick plain glass With
Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The sections are to be cut
to length, mitre joined with corner bracket Centre mullions are to be fixed using
0.00 0.00
mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner
brackets made of CRCA with zinc phosphate. Mullion caps made of Glass filled
nylon. The above frames should be fixed to the concrete/masonry wall by means
of self expanding screws, and complete for Fixed Partition with Door: Outer frame
section size of 46x52mm, mullion section should be of 46x70mm, fixed beading
should be of 18x25mm, section for shutter should be of 46x46mm and section for
middle & bottom should be of size 23x130mm.
Main Building: Partitions in offices (GF,FF,SF) #REF! Sqm #REF! 1 Sqm #REF! #REF! 0.00
56 BMT-U.06: Supply of expansion joint filler board for buildings, columns, beams
and slabs 50 mm THICK 0.00 0.00
S.N Description of Item Qty Rate Per Amount Main Building Sump
57 BMT-M.78:BMT-M.78: Providing and fixing plain PVC rigid foam sheet wall
panelling of thickness 5mm consisting of panels having size 1220mm X2440mm
stuck on inner frame work of 25mm wide strips of 5mm thick PVC rigid foam
sheet. The strips should have in their centre a grove of 6mm width and 2mm
depth for sinking the head of the screw used to fix the strips to the wall and should
be placed vertically at equal intervals of 405/407mm centre to c entre. The PVC
strips shall be fixed to the wall using 65mm long M.S. screws through the groove
in the strip by using PVC fasteners. The distance between two screws shall not be
more than 300mm. a groove of 2mm may be left at the joint of two panels for
aesthetic looks. This framework is done for making existing wall surface in 0.00 0.00
ensured level and for sticking the wall panelling sheet (panel) on it. The exact size
of the panel and correspondingly of the grid May be varied depending n the size
of the wall. However it must be ensured that a strips of 5mm thick PVC sheet of
width 75mm feathered at the edges shall be stuck at the places where two panels
are joined, using solvent cement. , complete as per direction of Engineer-in-
Charge, manufacture’s specification & drawing
S.N Description of Item Qty Rate Per Amount Main Building Sump
Septic tank #REF! Sqm #REF! 1 Sqm #REF! 0.00 0.00
56 Applying Two coats of Corroseal Epoxy Resin based Coating in one base coat
and One top coats over the thoroughly prepared interior surfaces as directed by
departmental officers, with each coat not exceeding 60 microns in dry film
thickness and total film thickness to 240 microns including cost and conveyance 0.00 0.00
of all materials to site, all labour charges ,curing and all other incidental charges
etc complete for finished item of work
S.N Description of Item Qty Rate Per Amount Main Building Sump
#REF! Cum #REF! 0.00 0.00
58 BLD-CSTN-6-6-(61) : Construction of CRS Masonary 2nd Sort in Cement Mortor
( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials
like Cement, Sand , Water, Granite Stones, including , ,labour charges for cutting
Stones to required size and shape, mixing of Cement Mortor, Construction, 0.00 0.00
Scaffolding Charges curing etc., complete for finished item of Work .
Sqm
Sqm
3 Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-
constructional chemical treatment measures) along the internal &
external vertical faces of the columns, plinth beams, basement and
top surface of the basement filling below flooring bed as per the
specified procedure conforming to IS 6315 (Part-2) 2001 and other
relevant approved specification duly using Chlorpyriphos/ Lindane
emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/
sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal
surface of the substructure to a depth of 500 mm around columns &
300 mm deep around plinth beams, basements & floor filling area
including excavation channel along the wall & rodding etc & cost &
conveyance of all materials to the site, cost of labour for spraying,
rodding etc complete for finished item of work as per the approval of
the Engineer-in-Charge.
Sqm
Page 491 of 787
Main Building :
Brick wall - Basement Cum 36.18
Steps Cum 21.38
Main Building :
Semi Basement Floor Cum 25.57
Ground floor Cum 165.79
1st floor Cum 155.09
2nd floor Cum 195.77
3rd floor Cum 338.17
4th floor Cum 338.17
5th floor Cum 338.17
6th floor Cum 318.28
7th floor - Outer walls Cum 30.50
Gents toilets Cum 3.69
Ladies Toilets Cum 3.69
Total of 100mm thick Brick masonry Cum 1912.90
17 BLD-CSTN-7-1-(72) : Providing flush Cement Pointing to CRS Masonary in
Cement Mortor (1:3) Prop . for including cost & conveyance of all materials to site
, seignaiorage charges on all materials, labour charges on all materials, curing
etc., Complete for finished item of work
Gents toilets Sqm 13.37
Ladies Toilets Sqm 13.37
Sqm 26.74
18 BLD-CSTN-8-9-(84) ; Plastering 20mm thick two coats with base coat of 16mm
thick in C.M. (1:6) and top coat of 4mm thick in C.M. (1:3) with dubara sponge
finishing including cost & conveyance of all materials like cement, Sand , Water,
etc., to site, seigniorage charges, all operational, including charges, labour
charges for mixing mortar, finishing, scaffolding, lift charges, curing , including
cutting grooves where ever necessary etc., complete for finished item of work of
uneven surfaces of walls. (External walls)
Main Building :
Main Building :
` Semi basement Sqm 246.31
Ground floor Sqm 4559.99
a Main Building :
ceiling plastering -Semi basement Sqm 3553.83
Ceiling plastering -Ground Floor Sqm 2290.06
Ceiling plastering -First Floor Sqm 2818.83
Ceiling plastering -Second Floor Sqm 2818.83
Ceiling plastering -3rd Floor Sqm 2634.59
Ceiling plastering -Fourth Floor Sqm 2479.35
Ceiling plastering -Fifth Floor Sqm 2479.35
Ceiling plastering -Sixth Floor Sqm 2789.18
Sqm 21864.01
b Septic tank Sqm 87.02
c Gents toilets Sqm 42.02
d Ladies Toilets Sqm 42.02
Total of 12mm thick Plastering in Cm ( 1:3) Sqm 22035.07
a Main Building :
Ground floor Kg 917533.00
1st floor Kg 174016.80
2nd floor Kg 161977.54
3rd Floor Kg 138976.61
4th floor Kg 138976.61
5th floor Kg 138976.61
6th floor Kg 165799.99
Kg 1836257.16
b Sump Kg 7317.00
c Septic tank Kg 2166.15
d Gents toilets Kg 1655.20
f Ladies Toilets Kg 1655.20
Kg 1849050.71
Sqm. 479.52
30 Providing GFRC designed Pannels with fibre reinforced pre-cast concrete with
50-50 sand cement matrix in a typical wall thickness of 50mm. Hallow rib profiles
created around the perimeter and across the rear face at designed centres. For
windows and elevation including cost and conveyance of all material and all
labour charges as per standerd practice and as directed by the engineer-in-
charge
Main Building:
Portico area Sqm 178.90
Semi basement steps Sqm 66.59
Ground floor Sqm 626.13
1st floor Sqm 90.56
2nd floor Sqm 85.77
3rd floor Sqm 61.79
4th floor Sqm 61.79
5th floor Sqm 61.79
6th floor Sqm 66.59
Total of Granite Flooring Sqm 1299.90
40 BLD-CSTN-9-1-(99) : Flooring with Polished Shabad stones 1st class 15 to 18
mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid
CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency
spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including
cost of all materials like cement, sand, and water and flooring stones etc.,
complete, including labour charges for dressing of flooring stones etc., complete
for finished item of work, including the cost and conveyance of all materials.
Main Building:
Ground floor Sqm 188.80
1st floor Sqm 182.28
2nd floor Sqm 92.39
3nd floor Sqm 105.04
4th floor Sqm 105.04
5th floor Sqm 105.04
6th floor Sqm 49.41
Main Building:
Ground floor Sqm 368.97
1st floor Sqm 336.91
2nd floor Sqm 531.17
3rd floor Sqm 1413.78
4th floor Sqm 1413.78
5th floor Sqm 1413.78
6th floor Sqm 1409.13
Total of 600 x 600 Tile Flooring Sqm 6887.50
42 BLD-CSTN-9-5-(103) : Flooring with Nano polished soluble salt porcelain vitrified
tiles screen printed of size 800 x 800 mm and thickness between 9-11 mm 1st
quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any
colour and finish in all shades and designs set over base coat of cement
mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed
neatly with white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, sand water and tiles etc.,
complete, for finished item of work, including the cost and conveyance of all
materials.
Main Building:
Ground floor Sqm 1597.97
1st Floor Sqm 1620.20
2nd Floor Sqm 2023.57
3rd Floor Sqm 864.66
Main Building:
Semi Basement floor- Toilets Flooring sqm 7.08
Ground floor- Toilets Flooring Sqm 107.86
1st floor Sqm 94.23
2nd floor Sqm 107.44
3rd Floor Sqm 164.88
4th floor ( Area) Sqm 164.88
5th floor ( Area) Sqm 164.88
6th floor ( Area) Sqm 204.11
Sqm 1015.37
Gents Toilets Sqm 42.02
Ladies Toilets Sqm 42.02
Total of Non-Skid Tile Flooring Sqm 1099.41
44 BLD-CSTN-9-23-(121): Providing skirting to internal walls to 15 cm height/risers
of steps with 15 to 18 mm thick polished Shahabad stone length equal to flooring
stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointed with white
cement paste mixed with pigment of matching shade to full depth, including cost
of all materials like Shahabad stone, cement, sand and water etc., complete for
finished item of work, including the cost and conveyance of all materials.
Main Building:
Main Building:
Ground floor Sqm 15.24
1st floor Sqm 15.24
2nd floor Sqm 14.56
3rd floor Sqm 11.19
4th floor Sqm 11.19
5th floor Sqm 11.19
6th floor Sqm 11.86
Total of Granite Skirting Sqm 90.47
46 BLD-CSTN-9-20 - (118) : Providing skirting to internal walls to 15 cm height/risers
of steps with digital / polished glazed full body porcelain wall tiles of size 300 x
600mm with any type of design texture such as marble finish, wooden, bamboo,
stone finishes etc., scratch less, stain free and thickness between 6- 8 mm 1st
quality length equal to flooring stones, set over base coat of CM (1:5) 12 mm
thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointed with white cement paste mixed with pigment of matching
shade to full depth, including cost of all materials like tiles, cement, sand and
water etc., complete for finished item of work,
Main Building:
Ground floor Sqm 93.62
Main Building:
Semi Basement floor - Lift area Sqm 47.09
Ground floor - Lift area Sqm 72.28
1st floor- Lift area Sqm 72.28
2nd floor- Lift area Sqm 67.24
3rd floor- Lift area Sqm 42.06
4th floor- Lift area Sqm 42.06
5th floor- Lift area Sqm 42.06
6th floor- Lift area Sqm 47.09
Total of Granite Cladding Sqm 432.16
Main Building:
Semi Basement floor- Toilets Flooring Sqm 23.67
Ground floor- Toilets Flooring Sqm 286.46
1st floor Sqm 288.56
2nd floor Sqm 288.56
3rd Floor Sqm 687.96
4th floor ( Area) Sqm 687.96
5th floor ( Area) Sqm 687.96
6th floor ( Area) Sqm 663.39
Sqm 3614.52
Gents Toilets Sqm 30.53
Ladies Toilets Sqm 30.53
Total of Tile Dadooing Sqm 3675.58
Main Building:
Ceiling for room in 3,4&5 floors family Lounge Sqm 1028.67
Ceiling for room in 3,4&5 Rooms Sqm 3705.45
Ceiling for room in 6 floors family Lounge Sqm 730.86
Ceiling for room in 6 Rooms Sqm 48.17
Total of False Ceiling Sqm 5513.15
Internal Electrification
Transformer
Nos 603
35 ELEC-5.1.2 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with
double ball bearings without Regulator. Makes: Crompton HS Decora / Bajaj
Regal Star / Havells ES Plus / Orient summer crown / Usha technix decorative
Nos 758
36 ELEC-5.1.12 Supply of 12" (300mm) Light duty exhaust fan with wireguard etc
complete
Nos 296
WIRING AND CONDUITS
37 ELEC-1.5.1 Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm
FR PVC insulated copper conductor single core cable inexisting surface /
concealed, steel/ PVC conduit and providingand fixing earthing the point with
same cable etc. as required. Makes : Finolex / RR kabel / Havells / APAR EBXL /
KEI /L&T / V-Guard.
Point 1700
No 1
43 ELEC-11.1.17 Supply and fixing of 12V, 150 AH MF battery including wire
leads. Makes: Amar Raja (Power Zone) or Equivalent model of Exide /
Panasonic / Gotech.
Nos 1
45 ELEC-6.6.2 Installation and commissioning of advanced lighting protection
systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of GI Mast with stay wire.
6. Installation of Earth Electrodes
Nos 1
50 ELEC-6.6.7 Supply of Bentonite Moisture Retaining Powder 30 Kg Bag
Nos 1
51 ELEC-6.6.8 Supply of Concrete Earth Pit of Dimensions: Width: 320 mm,
Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity:
5000 Kgs
Nos 1
52 ELEC-4.2.1 Supply,transporatation & installation of following sizes of Hot Dipped
Galvanized Iron perforated cable trays without cover, including horizontal and
vertical bends, reducers tees,cross members and other accessories as required
and duly suspended from the ceiling/Wall with suspenders etc., complete
(NB:Add 30% Extra for perforated cable tray with cover)
Mtr 5000.00
24 Ports Nos 12
56 ELEC-7.1.15 Supply , Installation, Testing and Comissioning of Floor mounted
Communication rack in two sections viz rear Steel Door and hinged front section
with glass doors, swing handles ,lock on both doors, Top and Bottom Cable
entries with gland plates ,Castor with brakes , 7 no Cable managers, 1 no Fan
tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers ,
power supply box for supplying power to hubs, fans etc along with earth
continuity kit, Mcb, indicator, moulded power supply cable, Blank panels of 1u / 2
u , sliding shelves .Frame of communication rack should be made of heavy grade
Aluminum profile PS grey painted and panels should be made from CRCA steel
18 swg RS Beige painted . Make: APW/HCL/Valrack/Netrack
Nos 14
64 Providing and Laying of 8 SWG dia G.I. wire on surface or in recessfor loop
earthing along with existing surface/ concealed conduit/submain wiring/ cable as
required.
Mtr 2000.00
65 Providing and Laying of 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required. (Q)
Mtr 800.00
66 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and
providing masonry enclosure with cover plate having locking arrangement and
watering pipe etc. with charcoal and salt as required. (Q)
Nos 14.00
Nos 14.00
TOTAL Amount ELECTRICAL
TOTAL
b Suitable BHP, 1500 RPM water cooled with radiator, diesel engine conforming
to relevant BS & IS standard complete with auto starting mechanism, 24 Volts
electric starting equipment, diesel tank, exhaust pipe extended upto 1m. outside
pump house duly insulated with 50mm thick glass wool with 1.0mm thick
aluminium sheet cladding, residential silencer, instruments and protection as
per specification, stop solenoid for auto stop in the event of fault with audio
indications, painted with post office red colour etc. as required.
c M.S. fabricated common base plate, coupling guard, foundation bolts etc. as
required.
d Suitable cement concrete pump foundation duly plastered with ant vibration
pads.
Makes of Pumps : Kirloskar / Mather & Platt Set 1
4 ELEC-9.5.15: Supplying, installing, testing & commissioning of electric
driven pressurisation pump (jockey pump) suitable for automatic operation and
consisting of following: complete in all respect as required :
c M.S. fabricated common base plate, coupling guard, foundation bolts etc. as
required.
d Suitable cement concrete pump foundation duly plastered with anti vibration
pads.
Makes of Motors : Siemens/ ABB/ Kirloskar Set 1
5 Fabricating, supplying, erection, testing and commissioning of cubicle type floor
mounted panel made from 14 CRCA Sheet complete with contactors, Auxillary
contacts, indicating lamps, Ammeters with elector switches, voltmeters with
selector switches,fuses, automatic delta type motor starter including connections
complete as required for 1 No Hydrant Pump, 1 No sprinker pump, 2 No Jockey
Pump and 1 No Engine Starting Panel for Diesel Pump, 1 No Battery charger
and 1Set of Battery complete in all respect including neccessary control
wiring as per the details given below:
Incoming
1) 400 Amps, 35KA (Icu = Ics) MCCB - 1 No.
2) 0-500V Digital type Voltmeter (size 96mm x 96mm) - 1 No.
3) Indication Lamps (LED type) -1 sets (1 set of 03 Nos.RYB)
4) 0-630A Digital type Ammeters - 1 No.
5)Current transformer (300/5A) -4Nos
Rong .R.S. Masonry for outer lwalls for store
Outgoing
1) 200 Amps 25KA (Icu = Ics) MCCB, - 1Nos
2) 63 Amps 25KA (Icu = Ics) MCCB -1No
3) Fully Automatic delta starter (75 HP ) with LED illuminated ON- OFF push
button - 1 No.
4) Fully Automatic delta starter (15HP ) with LED illuminated ON- OFF push
button - 1 No.
a 250 mm dia No 1
b 200 mm dia Nos 2
c 150 mm dia Nos 2
d 100 mm dia No 1
e 80 mm dia No 1
15 ELEC-9.5.22 : Providing, installation, testing and commissioning of dual plate
non - return valve of following sizes confirming to IS: 5312 complete with rubber
gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK /
H-Shankar / Leader/Zolotto / Intervalve.
a 150 mm dia Nos 3
b 80 mm dia No 1
16 Providing and fixing Testing arrangement in the pump house Set 1
comprising one no. 50mm dia. GM ball valve and 10RM of 50mm dia MS pipe (C
Class) confirming to IS 1239.
17 ELEC-9.5.27 :: Supply, installation, testing and commissioning of cast iron Y –
Stainer flanged end with SS mesh of following sizes confirming to IS
specifications complete with rubber gasket, GI bolts , nuts, washers etc as
required Makes: Leader / Zolotto/SANT.
a 200 mm dia Nos 2
b 100 mm dia No 1
(Basement 34 Nos + GF- 36 Nos, FF- 28, Sf-24) for Sprinkler system Nos 122
5 Supply,erection, testing and commissioning of hydraulically operated sprinkler Nos 1
alarm unit connected to sprinkler system (150 mm dia) in the Stilt floor
comprising of alarm valve, water motor with alarm gong, pressure gauge, drain
cock, check valve and pressure reducing valve. The quoted rate shall also
including the necessary accessories. HD(Q)
6 Providing, fixing of Stainless steel corrugated flexible pipe (hose) for dropping Nos 120
sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1000mm
or 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required.
TYCO / VIKING (Q)
7 Providing, fixing of approved type rosette plates ( Recessed type, in two piece) No 120
for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S.
plate of 2mm thick and the finish shall be powder coated and color (Q)
No 1
14 Supply, installation, testing and commissioning of 25 / 20mm dia Air
Release Valve
Air Release Valve No 1
15 Providing, fixing, welding joints and testing of heavy class MS ERW black
pipes as per relevant IS 1239/3589 with special accessories tees, elbows,
flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange
joints on bends, including fixing the pipe with suitable flat iron strip
clamps/brackets structural members dash fastner,civil breakage,making
good the same etc. painting with a primer coat and two coats of postal
red enamel etc. complete as required. (for sprinkler system)
6 ELEC-9.4.17 : Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand Nos 8
buckets along with bucket sand, Fire buckets with round bottom type enamel
painted, white inside & red out side and letter FIRE inblack out side & Handle
with mounting bracket
F PA Rack
P.A. SYSTEM
1 Supplying, installing, testing and commissioning of 10 zone selector P.A. No 2
console and with CRCA sheet housing and control desk( rack) as required.
Console shall have all call / call back facility complete with battery back up and it
should also work on AC single phase power. (Q)
5 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm, PVC Rmt 2000
insulated copper wires with 40 strand confirming to IS standards and
specifications. (Multi stand twisted wire)
6 Supplying, installing, testing and commissioning approved make PVC conduits
on ceiling / wall / floor etc. complete with accessories like, Junction boxes,
Collars, Bends etc.
25 mm Dia Rmt 800
Total of A+B+C+D+E
Total
Air Conditioning
4 Supply ans fixing of CPVC drain piping with suitable supports as required &
insulated with 6mm thick Nitrile rubber insulation Make Suderker/asserved
25MM Mtr 1500
32MM Mtr 200
5 Supply and laying of control cum transmission wiring to be properly laid in PVC
conduit & of Copper 3core 1.5 sqmm(cord) as per the approved routing as per Mtr 3500
standards.
6 Pressure,Vaccum testing of entire refrigerant piping and commissioning of VRF Lot 71
system as per standards practice.
7 Additional topping of Refrigerant 410a as per standard practice Kgs 1100
8 Supply,Fabrication,Installation ,testing and commissioning of GSS ducting
including all accessories and supports etc.,complete ducting supports to be
taken on wall brackets. Make:Jendel/TATA
24 G sqft 2000
22G sqft 1000
9 Supply,Installation,testing of thermal insulation of ducting with 25mm thick Al foil 1000
faced fibre glass of density 24Kg/cum with necessary adhesive and Al jointing sqft
tape etc., all complete Make:Fiber Cell
10 Accoutic Insulation of Intial part of supply air ducting with 12mm thick fibre glass sqft 1000
covered with Aluminium perforated sheet Make:Fiber cell
CC Camera Estimation
1 Supply and Commissioning of Panasoni 2MP CCTV Camera (DOME) Panasonic
PI-HFN103L HD CCTV Camera with Night Vision (2MP) DOME Type: IR DOME
(Indoor) Resolution: 2MP Image Sensor: 1/2.9 (2MP) Lens: 3.6MM. Including
Transportation,Civil Works, Labour Charges and GST(12%)
Ornamental Works
1 Supply and fixing of super big 3 tiers 2meters wide high k9 crystal big size
Baccarat chandelier of Size 200cm wide, 320cm height. Finish Chrome of Lights
84(25W) including light bulbs. Chinese top crystal-K9 crystal Asfour crystal or
swarovski crystal of Voltage 110V-240V , including all taxes, labour,
transportation, maintenance and conveyance charges, etc., complete
in Hall Nos 2
2 Supply and fixing of Double Organza 3 Light 16 inch Chrome Semi Flushmount
Ceiling Light 3 light Semi Flushmount from the Double Organza collection by
Dolan Designs will enhance your home with a perfect mix of form and function.
The features include a Chrome finish applied by experts. Height: 11.25
in.,Diameter: 16.00 in, Backplate/Canopy Width: 5.00 in, Backplate/Canopy
Length: 5.00 in, Backplate/Canopy Thickness: 1.12 in, Weight: 4.30 lb including
all taxes and labour and conveyance charges, etc., complete
Sound Systems
1 Supply and fixing of 2-Way Speaker System with 300 Watt RMS, 38-17000Hz
Frequency Response, 93db SPL, 100V LMT, Power Tap Selection of 110/55/28W
&8 Ohms Impedance Black Colour.including all taxes, labour, transportation, and
conveyance charges, etc., complete Make:JBL, Model:Control 29AV
Nos 14
2 Supply and fixing 2-Zone PA Booster Amplifier with 1250+1250W Power output,
20-20000Hz Frequency Response, 2-zone line inputs & 2-zone line outputs,
.including all taxes, labour, transportation, and conveyance charges, etc.,
complete Make: CROWN, Model:DCI 2/1250
Nos 1
3 Supply and fixing Max.10 Mic/16 Line Inputs(8mono + 4 Stereo), 4 Group Buses
+ 1 Stereo Bus, 4 AUX( Including FX), D-PRE Mic preamps with an inverted
Darlington circuit, 1 Knob Compressors, PAD Switch on Mono inputs, Phantom
Power, XLR balanced outputs .including all taxes, labour, transportation, and
conveyance charges, etc., complete Make: YAMAHA,Model:MG16XU
Nos 1
4 Supply and fixingMax.10 Mic/16 Line Inputs(8mono + 4 Stereo), 4 Group Buses
+ 1 Stereo Bus, 4 AUX( Including FX), D-PRE Mic preamps with an inverted
Darlington circuit, 1 Knob Compressors, PAD Switch on Mono inputs, Phantom
Power, XLR balanced outputs.including all taxes, labour, transportation, and
conveyance charges, etc., complete Make: YAMAHA, Model:MG16XU
Nos 1
5 Revised standard data- Item -20-a : Augoring and boring of holes in site for
Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like
Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980
as per approved designs including all operations, incidental, labour charges, hire
8107.00 Rmt 3930381.00
charges of machinery, augur bore drill and shell equipment, etc, complete for all
depths and for finished item of work for piles unit 1.00 Rmt - Augoring for
600mm dia piles
2. IBM-Total- 570
Page 571 of 787
8 Reffling with excavated useful soils including sand/Gravel (where rock cutting is
done) with standard specification after the pipe lline is laid jointing and tested as 49.62 Cum 1576.00
directed by the departmental officer including breaking clods etc, complete.
9 Carting of surplus excavated earth from the work site with a lead of 10.00 Km
beyond initial lead including loading, unloading and conveyance charges by 392.46 Cum 59418.00
tippers and trucks
2. IBM-Total- 571
Page 572 of 787
2. IBM-Total- 572
Page 573 of 787
2. IBM-Total- 573
Page 574 of 787
2. IBM-Total- 574
Page 575 of 787
2. IBM-Total- 575
Page 576 of 787
2. IBM-Total- 576
Page 577 of 787
2. IBM-Total- 577
Page 578 of 787
2. IBM-Total- 578
Page 579 of 787
Main Building :
33 Supplying and fixing of MS Grill for windows using 25mm x 6mm MS flat alround
and 10mm MS square bars horizontally at 125mm centre to centre and vertically
at 30cm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each
side) duly making cutting brick masonry, fixing and making to original surface 479.52 Sqm. 465777.00
neatly and painting grill with one coat of red oxide primer including and
conveyance of all materials ,cutting, bending, welding including all operational
charges and all labour charges etc., complete for finished item of work.
34 Providing GFRC designed Pannels with fibre reinforced pre-cast concrete with
50-50 sand cement matrix in a typical wall thickness of 50mm. Hallow rib profiles
created around the perimeter and across the rear face at designed centres. For
windows and elevation including cost and conveyance of all material and all 1930.40 Sqm. 7269886.00
labour charges as per standerd practice and as directed by the engineer-in-
charge ( for Ornamental works )
2. IBM-Total- 579
Page 580 of 787
36 BMT-N.58 : Providing and fixing door frames fabricated from sections made of
galvanized steel powder coated (base steel as per IS 513, galvanised as per IS
277 with zinc of 120 grams / square metre), the factory made section are powder
coated with pure polyester powder of 50-60 microns thick with total coated
thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate
of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket
in the frame section, frame section filled with polyurethane foam, cut to length,
and joined by way of welding, each frame provided with: a) 2mm thick MS 3525.90 Rmt 2764129.00
powder coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for
double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c)
40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos. with split
end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1
No
2. IBM-Total- 580
Page 581 of 787
38 Providing and fixing 30mm thick WPC ( Wood Plastic Composition ) Door
Shutters as per manufacture specification fitted with Hinges, 2 Nos of 250 mm
long MS Aldrop, 2 Nos of 125 mm lond Aluminium door handle, 1 No.of 250 mm
long Aluminium tower bolt, 1 no. 250 mm long Aluminium door latch & 1 No.baby 485.10 Sqm 1815729.00
lock including cost and conveyance of all material , all fixtures and all labour
charges etc, for fixing etc, complete.
39 BMT-F.30: Supplying & fixing collapsible steel shutters with vertical, double
channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm
with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site
height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary 194.86 Sqm 562996.00
hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all
accessories all fixtures and painted with one coat of approved steel primer etc.,
complete for finished item of work as per special spn 1105
40 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA
laths, interlocked together through their entire length and jointed together at the
ends by end-locks, mounted on specially designed pipe shaft of 50mm dia
nominal bore MS B class pipe with brackets, plates, guide channels, stoppers,
bottom locking plates and arrangements for inside & outside locking with push- 45.00 Sqm 148626.00
pull operations including cost of hood cover and springs complete, painted with
one coat of approved steel primer, locks, ball bearings, all accessories etc
complete for finished item of work as per special spn: 1108
41 BMS-W.19: Supplying and fixing of 7.5mm thick Aluminium Grill (as approved
by the department) 3.58 Kg/Sqm.including cost and conveyance of all material 168.30 Sqm 179932.00
and all labour charges etc, complete.
2. IBM-Total- 581
Page 582 of 787
2. IBM-Total- 582
Page 583 of 787
2. IBM-Total- 583
Page 584 of 787
2. IBM-Total- 584
Page 585 of 787
2. IBM-Total- 585
Page 586 of 787
56 Supply and fixing of partitions made of seccolor pre-painted steel (base steel as
per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120
GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick alkyd backer. Section for outer frame
should be 46x52mm, section for shutter should be 46x46mm, section for mullion
should be 46x70mm, section for beading should be 18x25mm and section for
middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm.
The partition should be paneled with 9mm pre-laminated particle board to a
height of 0.91m from the bottom, and remaining height with 5mm thick plain
glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The sections 191.43 Sqm 1110304.00
are to be cut to length, mitre joined with corner bracket Centre mullions are to be
fixed using mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer
(EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps
made of Glass filled nylon. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws, and complete for
Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section
should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter
should be of 46x46mm and section for middle & bottom should be of size
23x130mm.
57 BMT-U.06: Supply of expansion joint filler board for buildings, columns, beams
and slabs 50 mm THICK 543.12 Sqm 404795.00
2. IBM-Total- 586
Page 587 of 787
59 Supplying and fixing of stainless steel hand railing as per approved drawing with
top rail of 60mm dia pipe and 2mm thick of 204 grade and 20mm dia horizontal
pipes 4 Nos and vertical posts of 35mm dia and 1.6mm thick of 204 grade at
One Metre intervals, Drilling of 36mm dia holes on steps and flooring and fixing
the Verticle pipes in the holes and filling the pipe with white cement slurry up to
required depth using bonding agent and anchor fastner and welding, buffing, 3333.46 Kg 1768668.00
polishing all members of the railing thouroughly including cost and conveyance
of all materials, electrodes, welding charges, cost of all consumables, labour
charges etc., complete for finished item of work.
60 BLD-CSTN-8-11-(86) : RCM facia 5cm thick in CM (1:3) for drop walls, fins with
rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with
dubara sponge finishing, including cost & conveyance of all materials to site,
seigniorage charges, sales & other taxes on all materials, operational &
incidental, cost and conveyance of cement, wire mesh, water to work site, 3.58 Sqm 6903.00
centering, scaffolding and form work, lift charges etc., complete for finished items
of work but excluding cost of steel & its fabrication charges, for finished item of
work. (APSS No.403 & 903)
2. IBM-Total- 587
Page 588 of 787
62 Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers
and frames anywhere in A.P., F.O.R. destination including, loading, un-loading &
stacking at site but excluding central exise duty, sales tax, octroi and other Govt 2.00 Nos 5599.00
levies etc., as applicable
63 Supply, delivery and fixing of 110mm dia PVC vent pipe including vent cowl, cost
of material and labour charges etc., complete for fixing it to the septic tank for 10.00 Rmt 3004.00
15m height above GL
64 Manufacture,supply and delivery and Fixing of encapsulated plastic steps
including cost of materials packing ,loading, transportation, unloading and 16.00 Nos 3018.00
stacking at site of work etc, complete including C.E.D but excluding VAT
65 Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked
conforming to IS:1729-1979 of reputed make with cement caulked joints and
fixing as per site requirements including painting black with Japan paint and
fixing with in cement mortar (1½:1) and including fixing of M.S. clamps if 55.00 Rmt 87855.00
necessary with required no.of Bombay nails etc., complete including earth work
excavation and refilling etc for Out let arrangement.
2. IBM-Total- 588
Page 589 of 787
2. IBM-Total- 589
Page 590 of 787
70 Supply, Installation and commissioning approved make floor mounted EWC (suit)
CASCADE model ( for colour - Grade - I ) 'P' or 'S' trap with dual flush porcelain
cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat
cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 235 Nos. 3215691.00
mm long PVC inter connection pipe wall flanges all of approved make etc.
complete for finished item of work in all respects Colour Grade-I/Grade-II
72 Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm
x 315 mm with internal flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 including cost 76.2 x 101.6 6 Nos. 6572.00
mm teak wood block and conveyance of all materials to site, labour charges etc.,
complete for finished item of work for all floors.
73 Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/
Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium
Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso 120 Nos. 258223.00
or equivalent complete with standard CI brackets including wooden block:
550 x 400 mm - Double C.P. Pillar cock including cost and conveyance of all
materials to site, labour charges etc. complete for finished item of work
2. IBM-Total- 590
Page 591 of 787
76 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265
mm x 315 mm with integral flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-
charge, 12.7mm PVC connection with brass plumber union nuts CP coated,
12.70mm push cock 1st quality of approved make including Supply & fixing 42 Nos. 54971
31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including
cost and conveyance of all materials to site, labour charges etc., complete for
finished item of work for all floors.
77 Supplying & Fixing white glazed flat back Bowl urinals of size 410 x 265 x 305
mm with standard C.P. Spreader of overall size 95 x 95 x 57 mm complete
Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including Jaquar 36 Nos. 616139
make sensotronic concealed type flushing valve for urinal complete set with
installation box with control cock, Chrome plated with 7 years warranty.
2. IBM-Total- 591
Page 592 of 787
80 S & F 152.4mm (6")x101.6mm(4") gully trap 1st class with CI grating and
constructing single brick masonry wall chamber of size 20" x 14" x 12” in CM
(1:6) prop. Over a CC (1:5:10)prop. bed, and plastering 12mm thk. in CM (1:4)
prop. both inside and outside surfaces and fitted with RCC cover 3" thick as 46 Nos. 25347.00
directed by Engineer-in-charge including cost and conveyance of all materials to
site, labour charges etc., complete for finished item of work.
81 Supplying & Fixing 76.20mm (3") CI Nahany trap 1st quality with CP grating,
black painted for all floors including cost and conveyance of all materials to site, 609 Nos. 199271.00
labour charges etc., complete for finished item of work.
82 Supplying and fixing NP soap dish heavy type of approved make ISI quality with
NP screws etc., complete including cost and conveyance of all materials, labour 4 Nos. 945.00
charges for fixing etc., complete for finished item of work in all floors
83 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
including cost and conveyance of all materials and labour charges etc. complete 170 Nos. 279096.00
for finished item of work .( Chrome plated / Jupiter Aqua Lines-JALor equivalent
serie )
84 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty
including cost and conveyance of all materials and labour charges etc. complete 36 Nos. 86711.00
for finished item of work .( Ivory Gold / Jupiter Aqua Lines-JALor equivalent
series)
85 S & F 609.6 x 457.10 (24" x 18”) Indian make best quality glass, mirror with T.V.
shaped PVC frame plywood back with NP screws 1st quality including cost and
conveyance of all materials, labour charges etc., complete for finished item of 206 Nos. 105789.00
work in all floors.
2. IBM-Total- 592
Page 593 of 787
88 Supply & Fixing of Towel rod 24 " Jaquar make Queen series Ivory gold colour
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including cost 36 Nos. 114238.00
and conveyance of all materials, labour charges etc., complete for finished item
of work.
89 Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory gold colour
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including 36 Nos. 156120.00
cost and conveyance of all materials, labour charges etc., complete for finished
item of work.
90 Supply & Fixing of Exclusive overhead shower with 190mm long light body
shower arm Jaquar make Continental series, Chrome finish with 7 years
warranty/ Jupiter Aqua Lines-JALor equivalent series including cost and 32 Nos. 55226.00
conveyance of all materials, labour charges etc., complete for finished item of
work.
91 Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm
long bend pipe with wall flange Jaquar make Continental series, Chrome finish
with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including cost 168 Nos 678745.00
and conveyance of all materials, labour charges etc., complete for finished item
of work.
92 Supply and Fixing Wall Mixer with Telephonic shower arrangement with
crutch and flexible pipe Jaquar series Ivory gold colour for bath tub. with 7 years
warranty / Jupiter Aqua Lines-JALor equivalent series including cost and 36 Nos. 514703.00
conveyance of all materials, labour charges etc., complete for finished item of
work.
93 S & F tested NP bib taps at all levels of size 12.70mm dia of Indian make first
quality including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work in all floors.
300 grams 285 Nos. 113008
250 grams 273 Nos. 69167.00
2. IBM-Total- 593
Page 594 of 787
2. IBM-Total- 594
Page 595 of 787
2. IBM-Total- 595
Page 596 of 787
LT CABLES
2 ELEC-4.1.1 : Supply &intallation, comisioning and testing of 10 Sqmm 4 Core
XLPE insulated, 1100V gradearmoured alluminium cable as per specification
confirmingto IS:7098 (Part - I).(Feede Tot Pole)Makes : Torrent / Universal / 3000 Rmt 477180.00
Unicab / Polycab / Havells /Gloster / KE - 70 SqmmX 3.5 core -
3 ELEC-4.1.11: Supply &intallation, comisioning and testing Cable Glands For 4
120 Nos 11588.00
Core 10 Sqmm : comet , - 4 coreX6/10/16 Sqmm
4 ELEC-4.1.10 :Supply and making one end termination with heavy duty double
compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type,
heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for
following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium 700 Nos 182917.00
conductor cable of 1100 volt grade as required of size.
Makes:Dowels/Comet/SMI- 4 core x 6/10/16 sq.mm
2. IBM-Total- 596
Page 597 of 787
2. IBM-Total- 597
Page 598 of 787
2. IBM-Total- 598
Page 599 of 787
32 ELEC-3.8.1 Supply and fixing of.heavy duty 18W LED Down lighter, suitable for
Recessed mounting made of diecast alluminium body with powder coating,
acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating
voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,
THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT:
3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 695 Nos 1243661.00
10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting
Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG. 18W
33 ELEC-3.8.1 : Supply and fixing of. heavy duty 12W LED Down lighter, suitable
for Recessed mounting made of diecast alluminium body with powder coating,
acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating
voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,
THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT:
3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 398 Nos 621760.00
10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting
Technologies(LT) / GE / Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG. 12W
2. IBM-Total- 599
Page 600 of 787
35 ELEC-5.1.2 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with
double ball bearings without Regulator. Makes: Crompton HS Decora / Bajaj 758 Nos 1980768.00
Regal Star / Havells ES Plus / Orient summer crown / Usha technix decorative
36 ELEC-5.1.12 Supply of 12" (300mm) Light duty exhaust fan with wireguard etc
296 Nos 924825.00
complete
WIRING AND CONDUITS
37 ELEC-1.5.1 Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm
FR PVC insulated copper conductor single core cable inexisting surface /
concealed, steel/ PVC conduit and providingand fixing earthing the point with 1700 Point 2858550.00
same cable etc. as required. Makes : Finolex / RR kabel / Havells / APAR EBXL /
KEI /L&T / V-Guard.
38 Supplying and drawing following sizes of FR PVC insulatedcopper conductor,
single core cable in the existing surface/concealed, steel/ PVC conduit/ PVC
casing caping as required. Makes : Finolex / RR kabel / Havells / APAR EBXL / 18000 Mtr 2733600.00
KEI /L&T / V-Guard.
39 ELEC-1.2.2 Supplying and fixing of following sizes PVC conduit along with
4000.00 Mtr 174960.00
accessories in concealed complete as required.
Generator
40 ELEC-10.1.1 Supply, Transportation, erection and commissioning
(ExcludingFoundation) of 3 Phase, 415, 50Hz, water cooled multi cylinderdiesel
generator set with alternator of KVA/ KW out putcontineous rating directly
coupled Engine and Alternator with guardand mounted on a common base plate
of Robust construction andcomplete with standard control panel having IP-52 1 Nos 3629999.00
protection,Acoustic Enclosure as per CPCB norms , sound absorbing material,t
to restrict sound level up to 75 dB up to 1 mtr distance and as perCPCB norms
etc as per following specifications mentioned below
2. IBM-Total- 600
Page 601 of 787
2. IBM-Total- 601
Page 602 of 787
2. IBM-Total- 602
Page 603 of 787
2. IBM-Total- 603
Page 604 of 787
60 ELEC-7.3.8 Supply of 100 Pair raiser cable for telephone Makes: Finolex / Delton
100.00 Mtr 39765.00
/ Surabi / Polycab.
61 ELEC-7.3.12 Supply of 10 pair Telephone distribution box with back mount
frame, krone connector, powder coated metal body with lock and key 200.00 Mtr 134066.00
arrangement.
62 ELEC-7.3.10 Supply of 20 Pair telephone Copper wire. Makes: Finolex / Delton /
500.00 Mtr 39765.00
Surabi / Polycab
Earthing
2. IBM-Total- 604
Page 605 of 787
64 Providing and Laying of 8 SWG dia G.I. wire on surface or in recessfor loop
earthing along with existing surface/ concealed conduit/submain wiring/ cable as 2000.00 Mtr 15900.00
required.
65 Providing and Laying of 25 mm X 5 mm G.I. strip on surface or in recess for
800.00 Mtr 68168.00
connections etc. as required. (Q)
66 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and
providing masonry enclosure with cover plate having locking arrangement and 14.00 Nos 60602.00
watering pipe etc. with charcoal and salt as required. (Q)
67 Earthing with Copper earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe, with charcoal and salt as required Custom (Q) 14.00 Nos 205729.00
2. IBM-Total- 605
Page 606 of 787
b Suitable BHP, 1500 RPM water cooled with radiator, diesel engine conforming
to relevant BS & IS standard complete with auto starting mechanism, 24 Volts
electric starting equipment, diesel tank, exhaust pipe extended upto 1m. outside
pump house duly insulated with 50mm thick glass wool with 1.0mm thick
aluminium sheet cladding, residential silencer, instruments and protection as
per specification, stop solenoid for auto stop in the event of fault with audio
indications, painted with post office red colour etc. as required.
2. IBM-Total- 606
Page 607 of 787
c M.S. fabricated common base plate, coupling guard, foundation bolts etc. as
required.
d Suitable cement concrete pump foundation duly plastered with anti vibration
pads.
Makes of Motors : Siemens/ ABB/ Kirloskar 1 Set 124976.50 1 Set 124977.00
5 Fabricating, supplying, erection, testing and commissioning of cubicle type floor
mounted panel made from 14 CRCA Sheet complete with contactors, Auxillary
contacts, indicating lamps, Ammeters with elector switches, voltmeters with
selector switches,fuses, automatic delta type motor starter including connections
complete as required for 1 No Hydrant Pump, 1 No sprinker pump, 2 No Jockey
Pump and 1 No Engine Starting Panel for Diesel Pump, 1 No Battery charger
and 1Set of Battery complete in all respect including neccessary control
wiring as per the details given below:
Incoming
1) 400 Amps, 35KA (Icu = Ics) MCCB - 1 No.
2) 0-500V Digital type Voltmeter (size 96mm x 96mm) - 1 No.
3) Indication Lamps (LED type) -1 sets (1 set of 03 Nos.RYB)
4) 0-630A Digital type Ammeters - 1 No.
5)Current transformer (300/5A) -4Nos
2. IBM-Total- 607
Page 608 of 787
2. IBM-Total- 608
Page 609 of 787
2. IBM-Total- 609
Page 610 of 787
10 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including 1 Set 3500.00 1 Set 3500.00
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and
salt as required. ( Q )
11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth
electrode including connection with G.I. nut, bolt, spring, washer excavation and
re-filling etc. as required.
12 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.
13 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop 50 Rmt 135.00 1 Rmt 6750.00
earthing along with existing surface/ recessed conduit/ submain wiring/ cable
as required.( Q )
14 ELEC-9.5.21 : Supplying, fixing, testing and commissioning of butterfly valve PN
1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts,
Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes:
Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
2. IBM-Total- 610
Page 611 of 787
2. IBM-Total- 611
Page 612 of 787
2. IBM-Total- 612
Page 613 of 787
2. IBM-Total- 613
Page 614 of 787
2. IBM-Total- 614
Page 615 of 787
(Basement 34 Nos + GF- 36 Nos, FF- 28, Sf-24) for Sprinkler system 122 Nos 499.91 1 each 60989.00
5 Supply,erection, testing and commissioning of hydraulically operated sprinkler 1 Nos 34312.00 1 each 34312.00
alarm unit connected to sprinkler system (150 mm dia) in the Stilt floor
comprising of alarm valve, water motor with alarm gong, pressure gauge, drain
cock, check valve and pressure reducing valve. The quoted rate shall also
including the necessary accessories. HD(Q)
6 Providing, fixing of Stainless steel corrugated flexible pipe (hose) for dropping 120 Nos 780.00 1 each 93600.00
sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1000mm
or 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required.
TYCO / VIKING (Q)
7 Providing, fixing of approved type rosette plates ( Recessed type, in two piece) 120 No 35.00 1 each 4200.00
for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S.
plate of 2mm thick and the finish shall be powder coated and color (Q)
2. IBM-Total- 615
Page 616 of 787
2. IBM-Total- 616
Page 617 of 787
2. IBM-Total- 617
Page 618 of 787
2. IBM-Total- 618
Page 619 of 787
6 ELEC-9.4.17 : Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand 8 Nos 1363.38 1 each 10907.00
buckets along with bucket sand, Fire buckets with round bottom type enamel
painted, white inside & red out side and letter FIRE inblack out side & Handle
with mounting bracket
7 ELEC-9.4.18 : Supply and fixing of Fire bucket stand fabricated by M.S. angles to 8 Nos 1704.23 1 each 13634.00
install for two numbers of buckets as per local fire officers standards.
TOTAL OF EXTINGUISHERS 7192069.00
E FIRE DETECTION & ALARM SYSTEM
1 ELEC-9.2.1 : Supply, Installation, testing and commissioning of wall mounting 4 1 Nos 244272.25 1 each 244272.00
loop micro processor based analog addressable fire alarm Control panel
expandable by minimum 2 additional loops with minimum 80 character LCD
display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts
A C Power supply, automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and the hooters/strobes for
a minimum of 4 hours in battery condition the panel shall have suitable power
amplifiers for hooter / strobes the panel shall be capable beeing integrated with
the BMS system and shall include cost of supply, installation of any additional
modules or interfaces required for the same. The panel shall be completed as
per the specification and as required fixing of 4 loop Micro processor based Fire
Alarm control panel with zonal indictions and battery back up as per de tailed
specifications.
Makes: Notifier / Edwards.
2 ELEC-9.2.3 : Supply, Installation, testing and commissioning of intellegent 1 Nos 119295.75 1 each 119296.00
analogue addressable Repeater panel including the cost of mounting
accessories complete as per specification as required. Makes: Notifier / Edwards
2. IBM-Total- 619
Page 620 of 787
6 ELEC-9.2.14:Supply and installation of intalligent analogue addressable multi 155 Each 4317.37 1 Each 669192.00
criterion detectors below false ceiling/on ceiling including the cost of base plate.
75mm dia MS outlet box for fixing of the detector base,mounting accessories
etc., complete as per specifications and as required including labour charges etc
complete for finished item of the work as directed by Engineer - In - Charge.
[Makes: Notifier / Edwards].
7 Supply, installation, testing and commissioning of intelligent addressable 10 Each 6175.00 1 Each 61750.00
Multisensor built fault isolator feature (either in detector head or in detector base)
including the cost of base plate mounting as per specifications. Complete as
required.(Q)
8 ELEC-9.2.15:Supply and Installation of Intalligent analogue addressable Control 10 Each 4771.83 1 Each 47718.00
Modules including the cost of mounting accessories complete as per
specifications and as required. Makes: Notifier / Edwards.
2. IBM-Total- 620
Page 621 of 787
1709430.00
F PA Rack
P.A. SYSTEM
1 Supplying, installing, testing and commissioning of 10 zone selector P.A. 2 No 25500.00 1 each 51000.00
console and with CRCA sheet housing and control desk( rack) as required.
Console shall have all call / call back facility complete with battery back up and it
should also work on AC single phase power. (Q)
2 Supplying, installing, testing and commissioning solid state Amplifier of 480 W 1 No 62500.00 1 each 62500.00
RMS out put in rack, including necessory control wires, jocks etc. complete.(Q)
3 Supplying, installing, testing and commissioning solid state Amplifier of 120 W 1 No 35000.00 1 each 35000.00
RMS out put in rack, including necessory control wires, jocks etc. complete. (Q)
4 Supplying, installing, testing and commissioning 5W wall mounted type 50 No 2350.00 1 each 117500.00
speakers with talk back facility, in CRCA sheet fabricated housing, complete.(Q)
5 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm, PVC 2000 Rmt 32.00 1 Rmt 64000.00
insulated copper wires with 40 strand confirming to IS standards and
specifications. (Multi stand twisted wire)
6 Supplying, installing, testing and commissioning approved make PVC conduits
on ceiling / wall / floor etc. complete with accessories like, Junction boxes,
Collars, Bends etc.
2. IBM-Total- 621
Page 622 of 787
2. IBM-Total- 622
Page 623 of 787
2. IBM-Total- 623
Page 624 of 787
4 Supply ans fixing of CPVC drain piping with suitable supports as required &
insulated with 6mm thick Nitrile rubber insulation Make Suderker/asserved
25MM 1500 Mtr 200 1 Mtr 300000.00
32MM 200 Mtr 350 1 Mtr 70000.00
5 Supply and laying of control cum transmission wiring to be properly laid in PVC
conduit & of Copper 3core 1.5 sqmm(cord) as per the approved routing as per 3500 Mtr 160 1 Mtr 560000.00
standards.
6 Pressure,Vaccum testing of entire refrigerant piping and commissioning of VRF 71 Lot 15000 1 Lot 1065000.00
system as per standards practice.
7 Additional topping of Refrigerant 410a as per standard practice 1100 Kgs 900 1 Kgs 990000.00
8 Supply,Fabrication,Installation ,testing and commissioning of GSS ducting
including all accessories and supports etc.,complete ducting supports to be
taken on wall brackets. Make:Jendel/TATA
24 G 2000 sqft 85 1 sqft 170000.00
22G 1000 sqft 95 1 sqft 95000.00
9 Supply,Installation,testing of thermal insulation of ducting with 25mm thick Al foil 1000 1 sqft 60000.00
faced fibre glass of density 24Kg/cum with necessary adhesive and Al jointing sqft 60
tape etc., all complete Make:Fiber Cell
10 Accoutic Insulation of Intial part of supply air ducting with 12mm thick fibre glass 1000
sqft 70
1 sqft 70000.00
covered with Aluminium perforated sheet Make:Fiber cell
2. IBM-Total- 624
Page 625 of 787
2. IBM-Total- 625
Page 626 of 787
2. IBM-Total- 626
Page 627 of 787
2. IBM-Total- 627
Page 628 of 787
2. IBM-Total- 628
Page 629 of 787
2. IBM-Total- 629
Page 630 of 787
2. IBM-Total- 630
Page 631 of 787
2. IBM-Total- 631
Page 632 of 787
2. IBM-Total- 632
Page 633 of 787
Total ofTotal of Gravel filling - Main Building #REF! Cum #REF! 1 Cum
1. IBM-Bldg 633
Page 634 of 787
1. IBM-Bldg 634
Page 635 of 787
1. IBM-Bldg 635
Page 636 of 787
1. IBM-Bldg 636
Page 637 of 787
1. IBM-Bldg 637
Page 638 of 787
Main Building :
Brick wall - Basement #REF! Cum #REF! 1 Cum
Steps #REF! Cum #REF! 1 Cum
Ground Floor ( 225mm Thick Walls) - #REF! Cum #REF! 1 Cum
1st Floor outer walls #REF! Cum #REF! 1 Cum
2nd Floor outer walls #REF! Cum #REF! 1 Cum
3rd floor - Outer walls #REF! Cum #REF! 1 Cum
4th floor - Outer walls #REF! Cum #REF! 1 Cum
5th floor - Outer walls #REF! Cum #REF! 1 Cum
6th floor - Outer walls #REF! Cum #REF! 1 Cum
### BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement
solid blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks
using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust
including cost and conveyance of all materials, labour charges, scaffolding and
curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for
walls for Superstructure Walls.
1. IBM-Bldg 638
Page 639 of 787
1. IBM-Bldg 639
Page 640 of 787
Main Building :
Ground Floor #REF! sqm #REF! 1 sqm
1st floor #REF! sqm #REF! 1 sqm
2nd floor #REF! sqm #REF! 1 sqm
3rd floor #REF! sqm #REF! 1 sqm
4th floor #REF! sqm #REF! 1 sqm
5th floor #REF! sqm #REF! 1 sqm
6th floor #REF! sqm #REF! 1 sqm
### BLD-CSTN-8-2-(77): Plastering with 12mm thick in single coat in CM (1:4)
finished smooth including cost and conveyance of all materials to site, finishing,
curing, scaffolding and all operational, incidental, labour charges etc., including
cutting grooves where ever necessary etc., complete for finished item of work.
(As per SS 903). Inner walls
Main Building- Ground floor #REF! Sqm #REF! 1 Sqm
1st Floor Main Building #REF! Sqm #REF! 1 Sqm
2nd Floor Main Building #REF! Sqm #REF! 1 Sqm
3rd Floor Main Building #REF! Sqm #REF! 1 Sqm
4th Floor Main Building #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 640
Page 641 of 787
Main Building :
` Semi basement #REF! Sqm #REF! 1 Sqm
Ground floor #REF! Sqm #REF! 1 Sqm
Inner walls - First floor #REF! Sqm #REF! 1 Sqm
Inner walls - Second floor #REF! Sqm #REF! 1 Sqm
Inner walls - Third floor #REF! Sqm #REF! 1 Sqm
Inner walls - Fourth floor #REF! Sqm #REF! 1 Sqm
Inner walls - Fifth floor #REF! Sqm #REF! 1 Sqm
Inner walls - Sixth floor #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-8-1-(76) : Plastering with 12mm thick in single coat in CM (1:3)
finished smooth including cost and conveyance of all materials to site, finishing,
curing, scaffolding and all operational, incidental, labour charges etc., including
cutting grooves where ever necessary etc., complete for finished item of work.
(As per SS 903). per 10 Sqm.
a Main Building :
ceiling plastering -Semi basement #REF! Sqm #REF! 1 Sqm
Ceiling plastering -Ground Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -First Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -Second Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -3rd Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -Fourth Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -Fifth Floor #REF! Sqm #REF! 1 Sqm
Ceiling plastering -Sixth Floor #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 641
Page 642 of 787
1. IBM-Bldg 642
Page 643 of 787
1. IBM-Bldg 643
Page 644 of 787
a Main Building :
Ground floor #REF! Kg #REF! 1 Kg
1st floor #REF! Kg #REF! 1 Kg
2nd floor #REF! Kg #REF! 1 Kg
3rd Floor #REF! Kg #REF! 1 Kg
4th floor #REF! Kg #REF! 1 Kg
5th floor #REF! Kg #REF! 1 Kg
6th floor #REF! Kg #REF! 1 Kg
1. IBM-Bldg 644
Page 645 of 787
1. IBM-Bldg 645
Page 646 of 787
Main Buiding :Main Doors -MD - at GF Main Entrance 1 x 8 #REF! Nos #REF! 1 Nos
### BMT-N.58 : Providing and fixing door frames fabricated from sections made of
galvanized steel powder coated (base steel as per IS 513, galvanised as per IS
277 with zinc of 120 grams / square metre), the factory made section are powder
coated with pure polyester powder of 50-60 microns thick with total coated
thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate
of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket
in the frame section, frame section filled with polyurethane foam, cut to length,
and joined by way of welding, each frame provided with: a) 2mm thick MS
powder coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for
double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c)
40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos. with split
end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1
No
1. IBM-Bldg 646
Page 647 of 787
1. IBM-Bldg 647
Page 648 of 787
Main Building:
Portico area #REF! Sqm #REF! 1 Sqm
Semi basement steps #REF! Sqm #REF! 1 Sqm
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 648
Page 649 of 787
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3nd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-9-5-(103) : Flooring with Nano polished /stain free soluble salt
porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness
between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and finish in all shades and designs, set over base
coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof
slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs
per sqm & jointed neatly with white cement paste to full depth mixed with
pigment of matching shade, including cost of all materials like cement, sand
water and tiles etc., complete, for finished item of work, including the cost and
conveyance of all materials.
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 649
Page 650 of 787
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st Floor #REF! Sqm #REF! 1 Sqm
2nd Floor #REF! Sqm #REF! 1 Sqm
3rd Floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-9-6-(104) : Supply of Non-skid red or white full body Ceramic floor
tiles of scratch free- stain free and scratch free-nano finish of size 600 x 600
mm and thickness between 8-10 mm 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed
already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste
to full depth mixed with pigment of matching shade, including cost of all materials
like cement, sand water and tiles etc., complete for finished item of work,
including the cost and conveyance of all materials. (For Toilets)
Main Building:
Semi Basement floor- Toilets Flooring #REF! sqm #REF! 1 sqm
Ground floor- Toilets Flooring #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd Floor #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 650
Page 651 of 787
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-9-21 - (119) : Providing skirting to internal walls to 15 cm height /
risers of steps with 8 mm thick mirror polished granite tiles length equal to
flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with
white cement paste mixed with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc., complete for finished
item of work
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 651
Page 652 of 787
Main Building:
Ground floor #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd floor #REF! Sqm #REF! 1 Sqm
4th floor #REF! Sqm #REF! 1 Sqm
5th floor #REF! Sqm #REF! 1 Sqm
6th floor #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-9-21 - (119) : Cladding to internal walls with 8 mm thick mirror
polished granite tiles of any shade length equal to flooring stones, set over base
coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., complete including seigniorage charges, etc.,
complete for finished item of work
Main Building:
Semi Basement floor - Lift area #REF! Sqm #REF! 1 Sqm
Ground floor - Lift area #REF! Sqm #REF! 1 Sqm
1st floor- Lift area #REF! Sqm #REF! 1 Sqm
2nd floor- Lift area #REF! Sqm #REF! 1 Sqm
3rd floor- Lift area #REF! Sqm #REF! 1 Sqm
4th floor- Lift area #REF! Sqm #REF! 1 Sqm
5th floor- Lift area #REF! Sqm #REF! 1 Sqm
6th floor- Lift area #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 652
Page 653 of 787
Main Building:
Semi Basement floor- Toilets Flooring #REF! Sqm #REF! 1 Sqm
Ground floor- Toilets Flooring #REF! Sqm #REF! 1 Sqm
1st floor #REF! Sqm #REF! 1 Sqm
2nd floor #REF! Sqm #REF! 1 Sqm
3rd Floor #REF! Sqm #REF! 1 Sqm
4th floor ( Area) #REF! Sqm #REF! 1 Sqm
5th floor ( Area) #REF! Sqm #REF! 1 Sqm
6th floor ( Area) #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-10-32-(155) : Supplying and fixing Gyp Board Fine Line Grid false
ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5
mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595
mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI
wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of
ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the
frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from
soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion
fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with
galvanised spring steel level clip of PVC unversal holding clips system at 1200
mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x
595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat
complete for finished item of work as per Idia Gypsum Ltd specification.
1. IBM-Bldg 653
Page 654 of 787
Main Building:
Ceiling for room in 3,4&5 floors family Lounge #REF! Sqm #REF! 1 Sqm
Ceiling for room in 3,4&5 Rooms #REF! Sqm #REF! 1 Sqm
Ceiling for room in 6 floors family Lounge #REF! Sqm #REF! 1 Sqm
Ceiling for room in 6 Rooms #REF! Sqm #REF! 1 Sqm
### BLD-CSTN-9-21-(119) : Cladding to External walls with Sand Stone like
( BANSIPAHARPUR STONE ) (1200 X 600 ) 30MM THK CLADDING as
approved by Engineer-in-charge of length not less than 2.43mts using cement
compatible bonding agent having acrylic emulsion base set over 12mm thick CM
(1:5) base coat and neat grey cement slurry of honey like consistency spread at
the rate of 3.3 kg.s per sq.mt including fixing with MS clits with anticorrosive
coating hold fasts and using Janatha paste and jointed with white cement paste
mixed with pigment of matching shade to match the shade of granite slabs
including cost and conveyance of all materials and water to work site, including
all operational, incidental, and labour charges such as mixing mortar, fixing in
position, including lift charges, curing, including cutting the brick masonry walls
and redoing the same such that the top surface of tiles is to be flushed with
plastered surface etc., complete for finished item of work.(APSS No.701 &
707)
Main Building: All sides of the Building in GF #REF! Sqm #REF! 1 Sqm
1. IBM-Bldg 654
Page 655 of 787
1. IBM-Bldg 655
Page 656 of 787
1. IBM-Bldg 656
Page 657 of 787
MUNCIPAL CORPORATION
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 657
Page 658 of 787
Amount
#REF!
#REF!
1. IBM-Bldg 658
Page 659 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 659
Page 660 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 660
Page 661 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 661
Page 662 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 662
Page 663 of 787
Amount
#REF!
1. IBM-Bldg 663
Page 664 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 664
Page 665 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 665
Page 666 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 666
Page 667 of 787
Amount
#REF!
#REF!
#REF!
1. IBM-Bldg 667
Page 668 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 668
Page 669 of 787
Amount
#REF!
#REF!
#REF!
1. IBM-Bldg 669
Page 670 of 787
Amount
#REF!
#REF!
1. IBM-Bldg 670
Page 671 of 787
Amount
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 671
Page 672 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 672
Page 673 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 673
Page 674 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 674
Page 675 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 675
Page 676 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 676
Page 677 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 677
Page 678 of 787
Amount
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 678
Page 679 of 787
Amount
#REF!
#REF!
1. IBM-Bldg 679
Page 680 of 787
Amount
#REF!
#REF!
#REF!
#REF!
1. IBM-Bldg 680
Page 681 of 787
26 BMW-I.63 Constructing Brick mlasonry supprt for G.I pipe with 657 68 1 Each
C.M 304.8 x 228.6 x228.6 mm size including
plastering and finishing etc. complete.
27 BMW-F.21 15mm NB size gun metal peet valve 232 545 1 Each
28 BMW-F.19 20mm NB size gun metal peet valve 230 733 1 Each
29 BMW-F.17 25mm NB size gun metal peet valve 228 1051 1 Each
30 BMW-F.23 32mm NB size gun metal peet valve 234 1594 1 Each
31 BMW-F.25 40mm NB size gun metal peet valve 236 2155 1 Each
32 BMW-F.27 50mm NB size gun metal peet valve 238 3155 1 Each
33 BMW-F.29 65mm NB size gun metal peet valve 240 4868 1 Each
34 BMW-G.01 Polyetheylene water storage tank with Double layer 335 5 1 Lt
35 labour charges only 336 0 1 Lt
36 BMW-D.04 IWC 580mm long Orissa pan Hindware/Parry/Neycer 136 1399 1 Each
with ISI mark
37 BMW-D.13 European Water Closet of 1st quality conforming to 145 1784 1 Each
IS:2556-Part-2-1973 of Hindustan / Neycer
BMW-D.18 Supply & fixing of floor mounted Close coupled EWC
suit CASCADE model 'P' or 'S' trap with dual flush
porcelain cistern:White Colour
65 S&F 12.7 mm dia NP push cock Ist quality 202 200 1 Each
66 S & F angle stop cock 12.7 mm dia first quality Indian 178 350 1 Each
Make Seiko or equivalent
67 Supplying and fixing of SWR PVC pipes
a) For 75mm dia per 3 RM 345 202 1 Each
Cost of Door bend 392 53 1 Each
Cost of Plain bend 389 39 1 Each
Cost of Single T junction 401 47 1 Each
Cost of PVC cowl 432 11 1 Each
Cost of PVC clamps 438 12 1 Each
Labour charges
b) For 90mm dia per 3 RM 368 550 1 Each
Cost of Door bend 393 75 1 Each
Cost of Plain bend 390 56 1 Each
Cost of Single T junction 402 70 1 Each
Cost of PVC cowl 433 13 1 Each
Cost of PVC clamps 439 13 1 Each
Labour charges
c For 110mm dia per 3 RM 347 383 1 Each
Cost of Door bend 394 84 1 Each
Cost of Plain bend 391 65 1 Each
Cost of Single T junction 403 85 1 Each
Cost of PVC cowl 434 15 1 Each
Cost of PVC clamps 440 14 1 Each
Labour charges
68 BMT-B.12 Supplying and fixing of 16mm to 20 mm thick Dongri 32 638 1 Sqm
Adanga polished marble partitioins of size 4' 0" x 2' 0"
for urinals
69 Pg.No.294 Supply and delivery of 180mm dia UPVC casing pipes 448 1 Each
70 BMW-G.05 31.75 mm dia PVC flexible waste pipe 339 24 1 Each
71 BMW-D.33 white glazed flat back Bowl urinals of size 440 mm x 165 690 1 Each
265 mm x 315 mm
72 BMW-I.200 Supply & fixing of Jaquar make sensotronic concealed 794 12334 1 Each
type flushing valve for urinal
73 Polished Marble slabs of any variety 33 460 1 sqm
74 Chiselling the brick masonry wall 601 21 1 Rmt
75 BMW-V.05 Rounding the edges of marble (45-Buildings-SSR) 845 55 1 Rmt
76 Labour charges for fixing
77 BMW-I.125 white glazed porcelain channels 719 420 1 Each
78 floor mounted EWC (suit) CASCADE 150 6500 1 Each
79 BMW-D.19 b) Extra for colour - Grade - I/ Grade - II 151 10925 1 Each
80 BMW-D.20 C) Extra for spl. Colour - Grade - III 152 13915 1 Each
81 S & F liquid soap container 626 179 1 Each
82 BMW-I.190 Bibcock Jaquar Florentine 784 1010 1 Each
83 BMW-I.189 Health Faucet 783 3163 1 Each
84 Supply & Fixing of Angular stopcock with wall flange 786 972 1 Each
Jaquar Florentine
85 BMW-I.174 Supply fixing of Waste coupling Jaquar make 768 322 1 Each
Mape Connoisseurs - DTCP APUFIDC Hyderabad- Sanitary DATA 689/787
86 Supply & Fixing of Bottle Trap Jaquar make 787 1420 1 Each
87 Cost of Granite 29 2300 1 sqm
88 Full Rounding the edges of Marble/ Granite stone 847 216 1.00 Rmt
slabs
89 BMW-I.192 Angle Cock - Jaguar Florentine make 786 1082 1 Each
90 CENTRIFUGAL CAST IRON PIPES & FITTNGS AS
PER IS: 1729-1979
91 CI (spun) soils Waste & Ventilating pipe (1R M)
BMW-C.01 76.2 mm dia 86 645 1 Each
BMW-C.02 101.6 mm dia 87 737 1 Each
92 CI soil single junction with plug
BMW-C.15 76.2 mm dia 100 382 1 Each
BMW-C.16 101.6 mm dia 101 520 1 Each
93 CI soil Offsets 75 mm
BMW-C.31 76.2 mm dia 116 772 1 Each
101.6 mm dia 118 349 1 Each
94 CI Plug (Door) bends
BMW-C.11 76.2 mm dia 96 284 1 Each
BMW-C.12 101.6 mm dia 97 332 1 Each
95 BMW-I.161 Supply & fixing of chrome plated toilet paper holder 755 1145 1 Each
laquar make queen series / jagitel aqua lines -JAL-
make nira or equivalent series with 7 years warranty
2 Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1
mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum cru
10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fi
RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in
(exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C
and channel 100 mm thick as per Standard specification and including cost and conveyance of
cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all
operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing e
finished item of work as per Standard specification.
3 BMW-B.02 Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part
1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source
having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop
½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including
excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying
cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and
channel 100 mm thick as per Standard specification and including cost and conveyance of a
materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all material
and all incidental and operational, labour charges like mixing cement mortar, constructing masonry
lift charges, curing etc., complete for finished item of work as per Standard specification.
4 BMW-A.72 Supplying and fixing 150.00mmx100.00mm gully trap 1st class with CI grating and constructing
single brick masonry wall chamber of size 20" x 14" x 12” in CM (1:6) prop. Over a CC (1:5:10)prop
bed, and plastering 12mm thk. in CM (1:4) prop. both inside and outside surfaces and fitted with RCC
cover 3" thick as directed by Engineer-in-charge including cost and conveyance of all materials to
site, labour charges etc., complete for finished item of work.
6 BMW-C.40 Supplying and fixing CI floor traps 1st quality ISI marked conforming to IS :1729-1979 , 100 mm
dia Inlet- 100 mm (4") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P
Grating fixing with white cement as per site requirements with standard practice for all floor
including cost and conveyance of all materials to site, labour charges etc., complete for finished item
of work.(100mm dia traps for urinals & First basement drain)
1 No. 412.00
Overheads & Contractor's Profit 40% 57.68
Total Price 469.68
Rate per Each 469.68
7 BMW-D.19 Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE mode
( for colour - Grade - I ) 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all interna
parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm
angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc
complete for finished item of work in all respects Colour Grade-I/Grade-II
8 BMW-D.20 Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE mode
( for spl. Colour - Grade - III ) 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with a
internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap
15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make
etc. complete for finished item of work in all respects Colour Grade-III
9 BMW-D.33 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm
with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to
IS:2556-1995 as approved by Engineer-in-charge, 12.7mm PVC connection with brass plumber union
nuts CP coated, 12.70mm push cock 1st quality of approved make including Supply & fixing 31.75
mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of a
materials to site, labour charges etc., complete for finished item of work for all floors.
10 Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to
IS:2556-1995 including Jaquar make sensotronic concealed type flushing valve for urinal complete
set with installation box with control cock, Chrome plated with 7 years warranty.
11 Supplying and fixing in position of Counter type wash basin ovel shape (Off white / Ivory colour
with following specifications. All CP brass fittings to be of approved make & quality with CP wa
flanges.
a) Hindware / Jaquar make under counter Basin - 520mm x 410mm (Off white / Ivory colour) with
brackets / both.
b) 32mm dia heavy CP waste coupling with rubber plug and CP brass chain.
c) 12mm dia heavy-duty CP brass pillar cock.
d) 32mm dia heavy CP brass bottle trap with extension piece chrome finish.
e) 12mm dia CP brass heavy angle cock / Jaquar make bottle trap.
f) Jet Black Granite counter of approximate size 1000mm x 650mm including cutting of hole, bu
nosing for the front facia and around the hole etc., complete with edge polishing (1.75 x 0.6) specia
specification
12 BMW-D.25 Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1s
quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubbe
plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979
and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 gram
Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ,1 No.12.70mm
PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 300 gms Seiko o
equivalent including cost and conveyance of all materials to site, labour charges etc. complete fo
finished item of work
13 BMW-I.119 Supplying and fixing of stainless steel sink with drain board of size 914.4 mm x457.2mm, 1mm
thick of Indian make on cantilever brackets with including 32mm C.P. waste coupling, supply & fixing
31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chasing bric
masonry wall and making good restoring to original surfaces etc., complete.for finished item of wor
in all floors
14 BMT-B.12 Supplying and fixing of 16mm to 20 mm thick Dongri Adanga polished marble partitions o
size 4' 0" x 2' 0" for urinals including rounding edges three sides, fixing in position, polishing
including cost and conveyance of all materials and labour charges etc.complete for finished item o
work
as per SSR BMT-B.12
Rate as per SSR (32) 0.72 Sqm 638.00 1
Chiselling the brick masonry wall (601) 1.20 RM 24.00 1
Rounding the edges of marble (845) 2.40 RM 55.00 1
Total 717.00
Overheads & Contractor's Profit 14% 100.38
Total Price 817.38
Rate for Each 817.38
15 BMW-I.125 Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed
in brick masonry to the required slopes , white cement pointing including cost and conveyance of a
materials and labour charges etc. complete for finished item of work .
16 BMW-I.28 Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc.
complete including cost and conveyance of all materials, labour charges for fixing etc., complete fo
finished item of work in all floors
17 BMW-I.105 Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywoo
back with NP screws 1st quality including cost and conveyance of all materials, labour charges etc.
complete for finished item of work in all floors.
18 BMW-I.20 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods wit
brackets and aluminium screws including cost and conveyance of all materials, labour charges etc.
complete for finished item of work.
19 BMW-E-09 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalen
including cost and conveyance of all materials, labour charges etc., complete for finished item of wor
in all floors.
a) 300 grams
Rate as per SSR (182) 1.00 No. 219.00
Add 40% on labour 23.00 9.20
228.20
Overheads & Contractor's Profit14% 31.95
Total Price 260.15
Rate per Each 260.15
b) 250 gms
Rate as per SSR (Not there in SOR) 1.00 No. 223.00 1
Add 40% on labour 23.00 9.20
232.20
Overheads & Contractor's Profit14% 31.22
Total Price 254.22
Rate per Each 254.22
20 Supplying and fixing 12.70mm NP elbow action bib cock including cost and conveyance of a
materials, labour charges etc., complete for finished item of work in all floors.
21 BMW-E-29 Supplying and fixing 12.70mm NP push cock including cost and conveyance of all materials
labour charges etc., complete for finished item of work in all floors.
22 BMW-E-05 Supplying and fixing 12.70mm dia NP angle stop cock 1st qulity Indian make Seiko o
equivalent including cost and conveyance of all materials, labour charges etc., complete for finished
item of work in all floors.
23 BMW-I.32 S & F liquid soap container NP metalic with NP brackets and screws.
24 BMW-I.161 Supply, Fixing of approved make Toilet Paper Holder fixed to wall with cp screws and required a
accessories etc,complete.
25 BMW-I.190 Supply & Fixing of Bibcock Jaquar Florentine (Quarter turn)series, Chrome Finish with 7 year
warranty
26 BMW-I.189 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaqua
Florentine(Quarter turn) series, Chrome Finish with 7 years warranty
27 Supplying & fixing GI pipe Medium Grade properties & weight as per IS 1239 ISI mark in ground
or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges
unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling
chiselling masonry walls and making good the walls & floors to the original surface and fixing MS
clamps on TW blocks on walls including cost and conveyance of all materials and labour charge
complete for finished item of work.
28 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS
1239 in ground or on wall with GI fittings such as elbows tees couplings, nipples, plugs including
excavation for trenches and refilling the trenches ,chiselling masonry walls and making good the wall
& floors to the original surface and fixing MS clamps on TW blocks on walls including cost and
conveyance of all materials and labour charges complete for finished item of work except for G
bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent.
29 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heav
type including cost and conveyance of all materials , labour charges etc. complete for finished item o
work.
44 BMW-A.03 Supplying ,laying , jointing and testing 152.4mm SWG SP-1 pipes of ISI make conforming to IS
651 & 4127 with airtight cement joints in CM 1:5:1 prop.including excavation of trenches and socke
pits any soil(except rock requiring blasting) up to 1524mm(5'.0") depth and refilling with watering and
tamping
46 BMW-I.63 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in
CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and
conveyance of all materials and all labour charges etc. complete for finished item of work.
47 Supply and delivery of 160mm dia PVC casing pipes of Class-3 6 Kgs / Sq.cm ISI marked
complete for finished item of work
48 BMW-F.47 Supplying, fixing Gun Metal( GM) vertical check non-return valve conforming to IS 778 I -class with
heavy duty -25MM duty size.
49 BMW-F.51 Supplying, fixing Gun Metal( GM) vertical check non-return valve conforming to IS 778 I -class with
heavy duty -40MM duty size.
50 Supplying and fixing `` as per IS-778 Class - I , Indian make heavy type including cost and
conveyance of all materials , labour charges etc. complete for finished item of work.
51 BMW.E-26 Supplying & fixing 12.7mm 400 grams NP sink cock Seiko/Nice/Equivalent
1 No 989.00 1
Add 40% on labour29 11.60
1000.60
Overheads & Contractor's Profit 14% 140.08
Total Price 1129.08
Rate per Each 1129.08
52 BMW-G.98 Supplying & fixing 76.2mm dia.vent cowl upvc/swr conforming to IS 1729-1979
Rate as per SSR BMW-G.98 1 No 13.00 1
Overheads & Contractor's Profit 14% 1.82
Total Price 14.82
Rate per Each 14.82
54 Rate as per Hindware Wall Mounted Italian Collection Enigma P Trap distance 230 mm
quote
Make; Hindware
Model: 92024
Finish: Starwhite
Rate as per quote 1 No 7984.00 1
35% discount 5189.60
Overheads & Contractor's Profit 14% 726.54
Total Price 5916.14
Rate per Each 5916.14
55 Rate as per Hindware Concealed Flush Tank Concealo 83mm body with matching Flush Plates Gloss / Matt
quote Make; Hindware
Model: 506743
Finish: Starwhite
Rate as per quote 1 No 6990.00 1
35% discount 4543.50
Overheads & Contractor's Profit 14% 636.09
Total Price 5179.59
Rate per Each 5179.59
56 Rate as per Supply, delivery, testing, commissioning of multi stage centrifugal pump with suitable capacity
quote 415V, 3-phase,50Hz motor and coupling with base frame having discharge capacity of 10 Cum/Hr
against total head of 40m from all causes, without starter, complete as required.(Domestic Water
pumping from Water Sump to Over Head Tank ) ( 1 Working + 1 Stand By)
Make: Grundfos
Mape Connoisseurs - DTCP APUFIDC Hyderabad- Sanitary DATA 701/787
Capacity: LPM-168
Head : 40M
As per suppler quotation given by Grundfoss 1 No 48000.00 1
Overheads & Contractor's Profit 14% 6720.00
Total Price 54720.00
Rate per Each 54720.00
57 Rate as per Supply, delivery, testing, commissioning of De-watering submersible pump with suitable
quote capacity 230V, 1-phase,50Hz motor and coupling with base frame having discharge capacity of 5
Cum/Hr against total head of 15m from all causes, with Automatic ON/OFF Level Switch, starter
consists of suitable MPCB, Cont actor, Overload relay, Single Phase Prevent or, Push buttons, LED
on indicators, all in comings in Weather Proof box and necessary suitable copper cables from starter
panel to pump etc., complete as required.(1Working + 1 Stand By)
58 Rate as per Supply, delivery, installation, testing, commissioning of digital water level controller having
quote photo sensor for avoiding switching the pump on at night, digital display of water level in the tank,
trigger for automatic operation of pump set when the water level reaches low level, including fixing
necessary stainless steel sensors, float level switch, probes, etc. The control cabling from panel to
sump, sump to over head tank, making connections from the level controller to the pump starter,
necessary conduiting shall have to be done by qualified electrical contractor only.(One is for Under
Ground Sump & Another is for Over Head Tank)
59 Supply and fixing of 50mm dia. Water meter inclusive of 2 isolating ball valves, GI union and
strainer , NRV inside the valve chamber.
61 Rate as per Constructing water meter chamber of sizes as mentioned below over 100mm thick CC 1:4:8
quote leveling course, 100mm thick CC 1:3:6 for foundation with 150mm offset around, 230mm thick brick
masonry in CM 1:3 using table mold bricks, 12mm thick plaster on outside, inside surfaces in CM 1:3,
providing, fixing frame & cover in 100mm thick RCC 1:2:4 using 20mm metal, finishing top surface
with CM 1:3 plaster and finished smooth.
1200x1200mm internal clear dimension with 600x600mm SFRC frame & cover of medium duty (MD-
10 grade)(For Municipal Water Incoming Line)
62 Supply and Installation of leaf trap with khurra made out of Cast Iron with flange and grating at
rain water outlet at terraces and balconies with proper water proofing around the fitting and complete
the installation as per the specifications etc., complete.
63 Rate as per Liaison charges for Making water supply connection to municipal Water supply main with all
quote the necessary works which shall be paid as per actual including cutting the corporation road and
making good the road after the connection. the contractors responsibility shall include submitting the
papers to the corporation follow-up and get the approval etc.,complete (only statutory charges to be
paid by the client)
64 Supply and delivery of 180mm dia UPVC casing pipes of Class-3 6 Kgs / Sq.cm with suitable
couplings for borewell conforming to IS 4985/1988 and its amendments / revisions from time to time
with ISI marked complete for finished item of work
Rate as per SSR Page No.188 1 No 291.00 1
Rate per Each
1 Pumps Panel
6.2.2 Fabrication and erection of 16 SWG (2 mm) CRCA Sq.in 8,500 2.2
sheet steel enclosure for power control cubicle panel
including cutting, bending drilling, welding and reveting
etc., complete with cleaning with 7 tank process and
painting with powder coating including cost and
conveyance of all materials and labour charges, taking
20% extra for bending and wastages.
Incoming :
Supply and erecting, 63A 25KA TP MCCB with 80- each 1 6275
100% thermal setting plug
8.1.46 Bus Bars: 63A TPN Aluminum Bus bars kgs. 1.56 212.8
Metering Equipment
2 Supply, Laying and commissioning of following size 1.1KV grade XLPE insulated, sheathed
steel strip/ wire armoured copper conductor under ground cable laying in ground at a depth
of 750mm below ground level including excavation and refilling of earth and providing
protection with sand and bricks as per drawing (or) in existing cable trench/Cable tray/Hume
pipes. Cable route markers shall be provided at every 15mtrs interval. The cable shall
conform to IS 7098 with latest amendments.
3 Providing end terminations for following size cables including supply of Compression type
cable gland, lugs, insulation tape and identification tags complete with end termination and
earthing of gland.
3.1 4Cx1.5sq.mm
a) Material
4.2.14 Brass cable gland suitable for 4core 1.5 Sq.mm each 1 93.70
armoured cable
4.3.1 Supply and fixing of crimping type copper lugs each 4 22.00
confirming to I.S specifications for 1.5 Sq.mm including
nuts and bolts with connections.
Contractor Profit @ 14%
Total
VAT@2.8% on Total Price
Total Cost per mtr.
3.2 3Cx6.0sq.mm
a) Material
4.2.14 Brass cable gland suitable for 3core 6Sq.mm each 1 93.70
armoured cable
4.3.1 Supply and fixing of crimping type copper lugs each 3 22.00
confirming to I.S specifications for 6 Sq.mm including
nuts and bolts with connections.
Contractor Profit @ 14%
Total
VAT@2.8% on Total Price
Total Cost per mtr.
No. #REF!
#REF!
#REF!
say #REF!
solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement
cks of 225 mm thick from approved source having a minimum crushing strength of
with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia
including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils
conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching
r Standard specification and including cost and conveyance of all materials like
to site, cost of seigniorage charges on all materials and all incidental and
ixing cement mortar, constructing masonry, lift charges, curing etc., complete for
ard specification.
say 6494.58
say 10220.00
0.00
say 553.00
say 318.00
say 470.00
0.00
say 12455.00
say 15863.00
each 690.00
each 85.00
each 230.00
RM 24.00
1029.00
144.06
1173.06
Mape Connoisseurs - DTCP APUFIDC Hyderabad- Sanitary DATA 711/787
say 1173.00
Each 12334.00
Each 690.00
Each 85.00
RM 24.00
Each 44.00
13177.00
1844.78
15021.78
15021.78
of Counter type wash basin ovel shape (Off white / Ivory colour)
CP brass fittings to be of approved make & quality with CP wall
Each 1610.00
Each 1100.00
Each 1082.00
Each 322.00
Each 24.00
Each 85.00
Each 1446.00
Sqm 2415.00
Each 0.00
RM 226.80
8310.80
1163.51
9474.31
say 6669.00
0.00
to 20 mm thick Dongri Adanga polished marble partitions of
cluding rounding edges three sides, fixing in position, polishing,
all materials and labour charges etc.complete for finished item of
Sqm
RM
RM
say 817.00
say 479.00
ish heavy type of approved make ISI quality with NP screws etc.,
eyance of all materials, labour charges for fixing etc., complete for
say 235.00
say 160.00
say 260.00
Each
254.22
Each 388.00
388.00
262.00
say 461.00
say 291.00
Toilet Paper Holder fixed to wall with cp screws and required all
say 1603.00
say 1254.00
say 3720.00
say 226.00
say 294.00
say 411.00
say 459.00
say 500.00
say 351.00
say 474.00
say 697.00
say 1042.00
say 1420.00
say 2050.00
RM 6450.00
Each 382.00
Each 772.00
Each 284.00
7888.00
1104.32
8992.32
899.23
899.00
RM 7370.00
Each 520.00
Each 401.00
Each 332.00
8623.00
1207.22
9830.22
983.02
983.00
RM 12890.00
Each 1214.00
Each 790.00
Each 702.00
15596.00
2183.44
17779.44
1777.94
1778.00
RM
say 537.00
RM
say 719.00
say 79.00
Each
677.54
Each
414.00
Each
Each
2793.00
1129.00
15.00
19.00
Each
5916.00
Each
5180.00
54720.00
Each
39900.00
Each
21660.00
Each
17100.00
nted pipe.
Each
say 147.00
nsion with 600x600mm SFRC frame & cover of medium duty (MD-
coming Line)
25080.00
ap with khurra made out of Cast Iron with flange and grating at
lconies with proper water proofing around the fitting and complete
tions etc., complete.
Each
3078.00
Each
48450.00
18700.00
6275.00
331.97
2500.00
405.00
225.00
660.60
12040.00
9800.00
19600.00
5244.00
7170.00
85451.57
11963.22
97414.79
1514.21
98929.00
5800.00
273.35
484.50
219.45
390.92
6777.30
67.77
9.49
77.26
0.00
77.26
17200.00
273.35
484.50
219.45
Mape Connoisseurs - DTCP APUFIDC Hyderabad- Sanitary DATA 723/787
390.92
18177.30
181.77
25.45
207.22
0.00
207.22
93.70
88.00
25.44
207.14
0.00
207.14
93.70
66.00
22.36
182.06
0.00
182.06
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to B.I.S 458/2003 ,
Ex-factory, Excluding transportation, taxes & duties
80 mm dia Each 42
100 mm dia Each 43
150 mm dia Each 44
200 mm dia Each 61
225 mm dia Each 65
250 mm dia Each 71
300 mm dia Each 94 133 133
350 mm dia Each 116 167 167
400 mm dia Each 128 190 190
450 mm dia Each 201 254 254
500 mm dia Each 228 302 302
600 mm dia Each 310 396 396
700 mm dia Each 404 531 531
800 mm dia Each 569 678 678
900 mm dia Each 681 790 790
1000 mm dia Each 795 987 987
1100 mm dia Each 972 1251 1251
1200 mm dia Each 1180 1567 1567
1400 mm dia Each 1522 1984 1984
1600 mm dia Each 1946 2541 2541
1800 mm dia Each 1986 3272 3272
Note: Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost. Cement. Rs.5000/- per MT (including all taxes and freight).
Steel (M.S. Rods) - Rs.38000/- per MT. (including all taxes and freight).
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as
per the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease) in cost (Rs. per each ) due to change in the cost of M.S. Rods =
(S2- S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per each )due to change in the cost of Cement =
(C2-C1)/1000 X Wc.
S1 = Rs.36000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate.
C1 = Rs.5000/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate
Ws=Weight of MS Rods required (Kg.) per each collar.
Wc= Weight of Cement required (Kg.) per each collar.
3 3. SoR for R.C.C. S/S PIPES (Non - Pressure)
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes conforming to B.I.S.
458/2003 at ex-factory (rate per meter of effective length) Excluding transportation, taxes &
duties.
Size Unit S S Rate For 2017-18
NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia Metre 171
100 mm dia Metre 194
150 mm dia Metre 225
200 mm dia Metre 276
225 mm dia Metre 300
250 mm dia Metre 319
300 mm dia Metre 449 1110 1177
350 mm dia Metre 578 1384 1407
400 mm dia Metre 637 1534 1560
450 mm dia Metre 793 1692 1704
500 mm dia Metre 915 1935 2104
600 mm dia Metre 1284 2716 2767
700 mm dia Metre 1664 3472 3598
800 mm dia Metre 2140 4600 4689
900 mm dia Metre 2712 5783 5912
1000 mm dia Metre 3306 6506 6991
1100 mm dia Metre 3852 7683 8075
1200 mm dia Metre 4353 9072 9454
1400 mm dia Metre 6237 12013 13415
1600 mm dia Metre 7718 15610 16051
1800 mm dia Metre 8608 20717 21551
Note: Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost. Cement. Rs.5000/- per MT (including all taxes and freight).
Steel (M.S. Rods) - Rs.36500/- per MT. (including all taxes and freight).
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as
per the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease) in cost (Rs. per each ) due to change in the cost of M.S. Rods =
(S2- S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per each )due to change in the cost of Cement =
(C2-C1)/1000 X Wc.
S1 = Rs. 38000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate.
C1 = Rs. 5000/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate
Ws=Weight of MS Rods required (Kg.) per each collar.
Wc= Weight of Cement required (Kg.) per each collar.
4 4. S o R FOR R.C.C. S/S PIPES (Pressure)
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes conforming to B.I.S.
458/2003 Ex-factory (rate per meter of effective length) Excluding transportation, taxes &
duties.
Size Unit S S Rate For 2017-18
P1 - Class P2 - Class P3 - Class
80 mm dia Metre 227 255 291
100 mm dia Metre 255 306 353
150 mm dia Metre 352 455 562
200 mm dia Metre 409 587 775
225 mm dia Metre 459 667 862
250 mm dia Metre 503 711 902
300 mm dia Metre 676 1022 1271
350 mm dia Metre 843 1424 1837
400 mm dia Metre 1001 1889 2432
450 mm dia Metre 1063 2239 2987
500 mm dia Metre 1424 2424 3389
600 mm dia Metre 1950 3617 4694
700 mm dia Metre 2603 4759 5949
800 mm dia Metre 3256 5636 7178
900 mm dia Metre 3924 6615
1000 mm dia Metre 4972 7575
1100 mm dia Metre 5974
1200 mm dia Metre 6986
Note: Excise duty, CST/VAT extra as applicable at the time of supply.The above rates of RCC
Collars suitable to plain ended pipes are based on the following raw materials cost. Cement.
Rs.5000/- per MT (including all taxes and freight).Steel (M.S. Rods) - Rs.36500/- per MT. (including
all taxes and freight).The revised cost of RCC collars due to increase / decrease in the cost of raw
materials shall be as per the following formula.Revised Cost =Cost as per the above table
+R1+R2R1= Variation (increase / decrease) in cost (Rs. per each ) due to change in the cost of M.S.
Rods = (S2- S1)/1000 X Ws.R2= Variation (increase / decrease ) in cost (Rs. per each )due to
change in the cost of Cement = (C2-C1)/1000 X Wc.S1 = Rs. 38000/- , S2 = Cost of M S Rods (Rs.
Per MT including all taxes and freight) at the time of preparation of estimate.C1 = Rs. 5000/-, C2 =
Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of
estimateWs=Weight of MS Rods required (Kg.) per each collar.Wc= Weight of Cement required
(Kg.) per each collar.
5 5. S o R FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES
1 Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and Spigot pipes
conforming to B.I.S 5382/ 1985 (rate per each rubber ring) including transportation but
excluding taxes & duties. the Rubber Rings shall be tested at the factory premises
confirming to B.I.S. 5382/1985.
2 Lowering, laying and jointing of ac pressure pipes with ac couplings or CID joints complete with
Rubber rings in readymade trenches true to alignment and gradient including filling with water lead
upto 500 mts and testing to required pressure including all sundries but excluding cost of jointing
materials and conveyance from source of supply as per BIS No. 6530/1972
80 mm dia Rate/Metre 46 46 46
100 mm dia Rate/Metre 67 67 67
125 mm dia Rate/Metre 74 74 74
150 mm dia Rate/Metre 88 88 88
200 mm dia Rate/Metre 116 116 116
250 mm dia Rate/Metre 139 139 139
300 mm dia Rate/Metre 171 171 171
350 mm dia Rate/Metre 289 289 289
400 mm dia Rate/Metre 436 436 436
450 mm dia Rate/Metre 530 530 530
500 mm dia Rate/Metre 673 673 673
600 mm dia Rate/Metre 724 724 724
700 mm dia Rate/Metre 807 807 807
750 mm dia Rate/Metre 898 898 898
800 mm dia Rate/Metre 945 945 945
850 mm dia Rate/Metre 1009 1009 1009
900 mm dia Rate/Metre 1100 1100 1100
1000 mm dia Rate/Metre 1133 1133 1133
1. The above rates of AC Pipes are based on the Cement cost of RS 5000/- per MT (Including all
taxes and freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs. 78500/- per M.T basic price (Ex-
India Port) (Excluding duties, taxes and transportation etc.)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kg’s/Rmt
IC = Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be
increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kg’s/Rmt
IF = Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief engineers.
3)The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate
2 Transportation of AC pressure pipes at site of work anywhere in Andhra Pradesh 10% on the basic
on motor able roads for full truck loads including transit nsurance, unloading, and cost of
stacking at site of work etc. Complete (AC Couplings and Rubber rings are to be corresponding
supplied free of transportation AC Pressure
pipes.
9 9. S o R FOR A.C. COUPLINGS
Manufacture, Supply of A.C Couplings suitable to A.C.Pressure pipes (mazza process) as per BIS:
1592/2003 excluding cost of rubber rings to suit AC pressure pipes including cost of material,
incidental handling, packing, transportation and unloading at site transit risk, but excluding excise
duty, VAT and other govt. Levies and testing of joints as per IS Code
11. SoRATES FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR 201
Sl.No. Description
1 2
1 Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-fa
transportation, taxes & duties., for the following working pressures.(the manufacture shall design the pipes
2001)
Size Unit S S Rate For 2017-18
Rs. Rs. Rs.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2
350 MM DIA Metre 2535 2543 2555
400 MM DIA Metre 2723 2743 2773
450 MM DIA Metre 2887 2899 2931
500 MM DIA Metre 3123 3136 3160
600 MM DIA Metre 3586 3612 3646
700 MM DIA Metre 4078 4141 4265
800 MM DIA Metre 4945 5079 5204
900 MM DIA Metre 5690 5866 6032
1000 MM DIA Metre 6717 6935 7162
1100 MM DIA Metre 7566 7805 8084
1200 MM DIA Metre 8514 8855 9166
1300 MM DIA Metre 9706 10078 103451
1400 MM DIA Metre 11257 11702 12137
1500 MM DIA Metre 12750 13267 13755
1600 MM DIA Metre 14365 14925 15484
1700 MM DIA Metre 15484 16125 16766
1800 MM DIA Metre 17155 18249 19230
1900 MM DIA Metre 18330 19339 21024
2000 MM DIA Metre 20142 21401 22506
2 Cost of laying jointing, testing to Hydrostatic field test pressure including cost of rubber rings, cost of tra
emptying pipe line after completion of field testing etc.
350 MM DIA Metre 251 251 251
400 MM DIA Metre 271 271 271
450 MM DIA Metre 314 314 314
500 MM DIA Metre 333 333 333
600 MM DIA Metre 409 409 409
700 MM DIA Metre 481 481 481
800 MM DIA Metre 543 543 543
900 MM DIA Metre 595 595 595
1000 MM IA Metre 688 688 688
1100 MM IA Metre 772 772 772
1200 MMDIA Metre 856 856 856
1300 MM DIA Metre 970 970 970
1400 MM DIA Metre 1097 1097 1097
1500 MM DIA Metre 1190 1190 1190
1600 MM DIA Metre 1333 1333 1333
1700 MM DIA Metre 1451 1451 1451
1800 MM DIA Metre 1536 1536 1536
1900 MM DIA Metre 1621 1621 1621
2000 MM DIA Metre 1707 1707 1707
3 Conveyance of pre-stressed (Non-cylinder) concrete pipies and accessories including loading at factory, u
stacking for the following sizes.(minimum distance of 100 km to be considered if the distance is less by 100
5 Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming
dimensions confirming to IS:1538-1993 excluding cost of MS Specials including cost and conveyance to site
Diameter and thickness Unit Rate Diameter and thickness
80 mm DIA x 15 mm thick Each Flange 740 mm DIA x 20 mm thick
100 mm DIA x 15 mm thick Each Flange 1016 600 mm DIA x 20 mm thick
125 mm DIA x 15 mm thick Each Flange 1220 700 mm DIA x 25 mm thick
150 mm DIA x 15 mm thick Each Flange 1625 750 mm DIA x 25 mm thick
200 mm DIA x 15 mm thick Each Flange 2030 800 mm DIA x 25 mm thick
250 mm DIA x 15 mm thick Each Flange 2640 900 mm DIA x 25 mm thick
300 mm DIA x 15 mm thick Each Flange 2990 1000 mm DIA x 25 mm thick
350 mm DIA x 18 mm thick Each Flange 4360 1050 mm DIA x 25 mm thick
400 mm DIA x 18 mm thick Each Flange 5440 1100 mm DIA x 25 mm thick
450 mm DIA x 18 mm thick Each Flange 6324 1200 mm DIA x 32 mm thick
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.55000/-MT (Basic+ CED+ST &
freight).and cement price of Rs.5000/- per MT (including all taxes and freight) The rates may be
revised depending upon the increase/decrease in the cost of HT wire and cement. as per the
following method. The cost of HT wire may be obtained from reputed firms like SAIL/TATA/ SS Ltd.
etc. Revised Cost =Cost as per the above table
+R1+R2.
R1= Variation (increase / decrease ) in cost (Rs. per metre )
due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation
(increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X
Wc.
H1 = Rs. 52500/- H2 = Cost of HT Wire (Rs. Per MT including all taxes
and freight) at the time of preparation of estimate.
C1 = Rs. 5000/- C2
= Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
Wh=Weight of HT Wire required (Kg.) per metre of pipe.
Wc= Weight of Cement required (Kg.) per metre
of pipe. The rates for MS flanges are considering landed price of MS Plates of Rs.44000/- per MT.
Price variation to be released on actual weight of flange.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
12. SoRATES FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES
Sl.No. Description
1 2
1 Pre-stressed (Cylinder type ) concrete pipes conforming to IS 784/2001 @ ex-factory cost of pipes, excluding trans
For the following working pressures.(the manufacture shall design the pip
2 Cost of laying jointing, testing to hydrostatic field test pressure including cost of rubber rings, cost of transporta
3 Conveyance of pre-stressed (Non-cylinder) concrete pipes and accessories including loading at factory, un-loadin
to be considered if the distance is less by 100 km from
400 MM DIA Per KM/M 1.16 1.16 1.16
450 MM DIA Per KM/M 1.16 1.16 1.16
500 MM DIA Per KM/M 1.68 1.68 1.68
600 MM DIA Per KM/M 1.89 1.89 1.89
700 MM DIA Per KM/M 3.05 3.05 3.05
800 MM DIA Per KM/M 3.05 3.05 3.05
900 MM DIA Per KM/M 3.05 3.05 3.05
1000 MM DIA Per KM/M 4.83 4.83 4.83
1100 MM DIA Per KM/M 4.83 4.83 4.83
1200 MM DIA Per KM/M 9.45 9.45 9.45
1300 MM DIA Per KM/M 9.45 9.45 9.45
1400 MM DIA Per KM/M 9.45 9.45 9.45
1500 MM DIA Per KM/M 9.45 9.45 9.45
1600 MM DIA Per KM/M 9.45 9.45 9.45
1700 MM DIA Per KM/M 11.45 11.45 11.45
1800 MM DIA Per KM/M 11.45 11.45 11.45
1900 MM DIA Per KM/M 11.45 11.45 11.45
2000 MM DIA Per KM/M 12.08 12.08 12.08
Note: The rates of PCCP pipes which were incorporated in the SSR are based on the following raw materials cost.
HT Wire: - Rs.53,500/- (including all taxes & freight)
HR Coil (Hot Rolled): - Rs.46000/- (including all taxes & freight)
Cement Cost Rs. 5000/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per
the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X
Wh. R2= Variation
(increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Coil =(R2-R1)/1000 X Wr.
R3= Variation
(increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 52,500/- H2 =
Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
R1 = Rs. 41500/- R2 = Cost of
HR Coil (Rs. Per MT including all taxes and freight) at the time of preparation of estimate .
C1 = Rs. 5000/- C2 = Cost of Cement
(Rs. Per MT including all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of
pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Wr = Weight of HR Coil required (kg) per metre of pipe.
13. S.S. RATES FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2016-
1 BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES CONFORMING TO IS 15155 - 2002, Ex-factory exclu
Size Unit Rs. Rs. Rs.
4 -12Kg/cm2 14 Kg/cm2 16 Kg/cm2
250 MM DIA Meter 2493 2493 2493
300 MM DIA Meter 2789 2789 2789
350 MM DIA Meter 3695 3695 3765
400 MM DIA Meter 4131 4161 4424
450 MM DIA Meter 4151 4052 4192
500 MM DIA Meter 4497 4508 4800
600 MM DIA Meter 5591 5955 6412
700 MM DIA Meter 6793 7408 8010
800 MM DIA Meter 8177 8975 9755
900 MM DIA Meter 9916 10892 11859
1000 MM DIA Meter 11746 12958 14312
1100 MM DIA Meter 15572 15884 17318
1200 MM DIA Meter 16982 18084 19820
2 Cost of laying jointing, testing to Hydrostatic field test pressure including cost of site welding and fixing of
after completion of field tes
R3= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X W
H1 = Rs. 41500/- H2 = Cost of HR Plate (Rs. Per MT including all taxes and freight) at the time of preparation of es
= Rs.40000/- W2 = Cost of Wire rods (Rs. Per MT including all taxes and freight) at the time of preparation of estim
C1 = Rs. 5000/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the ti
preparation of estimate Wh=Weight of HR Plate required (Kg.) per metre of pip
Weight of Cement required (Kg.) per metre of pipe.
Ww = Weight of wire rods required (kg) per metre of pipe.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
14. S.S. RATES FOR M.S.SPIRAL PIPES ( 2017-18 )
Thickness in
S.No Description Unit Rate (Rs.)
mm
44500
15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2017-18. (PE - 80 Grade)
Manufacture, supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including
transportation to any where in A.P, excluding excise duty, sale tax and specials etc.,
complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.)
OD 40 mm 36
OD 50 mm 52
OD 63 mm 71
OD 75 mm 97
OD 90 mm 140
OD 110 mm 210
OD 125 mm 269
OD 140 mm 334
OD 160 mm 438
OD 180 mm 552
OD 200 mm 675
OD 225 mm 856
OD 250 mm 1059
OD 280 mm 1319
OD 315 mm 1678
OD 355 mm 2190
OD 400 mm 2838
OD 450 mm 3607
OD 500 mm 4431
OD 560 mm 5482
OD 630 mm 6934
OD 710 mm 8811
OD 800 mm 11151
OD 900 mm 14130
OD 1000 mm 17401
Note: Excise duty, CST / VAT extra as pplicable at the time of supply. The IPCL resin cost
adopted for the above rates are For PE - 80 grade Rs.97070/- per MT. (Excluding CED&ST)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Meter excluding CED & ST
P1 = Existing pipe price in Rs. Per Meter excluding CED & ST
A2 = Revised price of raw material Rs. Per MT excluding CED & ST
A1 = Existing price of raw material Rs. Per MT excluding CED & ST
M = Weight of pipe in Kgs per Meter as per weight chart.
16. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2017-18. (PE - 100 Grade)
I Manufacture, supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to
any where in A.P,excluding excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia
in coil & above 90 mm dia straight length in 6 M.)
97900
17 - HDPE PIPES –(PE –100 Grade) SEWER LINES FOR THE YEAR 2017-18
I Manufacture, supply, & delivery of HDPE pipes conforming to IS 14333 - 2000 For using Under Ground Drainage
and Sewerage Systems including transportation to any where in A.P, excluding excise duty, sale tax and specials
etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M or 12 M.)
97900
18. S.S. RATES FOR H.D.P.E FITTINGS FOR THE YEAR 2017-18
Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming to IS 4984 - 1995
including transportation to anywhere in A.P. Excluding excise duty, sale tax and specials etc.,
complete
I (a) PIPE ENDS LONG NECK
OD 50 mm 69
OD 63 mm 87
OD 75 mm 105
OD 90 mm 145
OD 110 mm 201
OD 125 mm 362
OD 140 mm 339
OD 160 mm 473
OD 180 mm 721
OD 200 mm 927
OD 225 mm 1065
OD 250 mm 1247
OD 280 mm 1393
OD 315 mm 1606
OD 355 mm 3358
OD 400 mm 4475
OD 450 mm 7445
OD 500 mm 8286
(b) MS FLANGES Rate per Each
II Providing and Fixing electro Fusion Ferrule Tapping saddle manufactured from virgin resin of PE-
80/PE-100 having blue/black colour using food grade compounded raw material with quality
assurance certificate from quality agencies like CIPET etc. For usage in drinking water system and
having working pressure of 10 bar. The cost shall include testing of all materials, labour all taxes
(central & state), inspection charges, transportation upto site, transit insurance, loading, unloading,
stacking, providing and fixing etc. Complete as specified and directed by the Departmental
Engineers.
SIZE
(Main pipe outer diameter in
mm & Tapping size in Inches)
63x1/2” 967
63 x3/4” 967
63 x1” 967
63 x1/2” 967
75 x1/2” 967
75 x3/4” 967
75 x1 967
90 x1/2” 967
90 x3/4” 967
90 x1” 967
90 x 1 1/4” 1254
90 x 1 1/2” 1254
90 x2” 1254
110x1/2” 967
110 x3/4” 967
110 x1” 967
110 x 1 1/4” 1254
110x1 1/2” 1254
110x2” 1254
160 x1/2” 967
160 x3/4” 967
160 x1” 967
160 x 1 1/4” 1371
160 x 1 1/2” 1371
160 x 2” 1371
200 x 1/2” 1371
200 x 3/4” 1371
200 x 1” 1371
200 x 1 1/4” 1973
200 x 2” 1973
250 x 1/2” 1390
250 x3/4” 1390
250 x1” 1390
250 x 1 1/4” 2009
250 x1 1/2” 2009
250 x 2” 2009
315 x 1/2” 1655
315 x3/4” 1655
315x1” 1655
315x1 1/4” 2248
315x1 1/2” 2248
315x2” 2248
TEST PRESSURE
Description
S. No. 2.5 Kgs/
4.0 Kgs/ Sqcm 6 Kgs/ Sqcm 10 Kgs/ Sqcm
Sqcm
1 Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies
conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light
Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-
divisional stores anywhere in AP excluding Excise duty and Sales Tax etc
78590
21. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2017-18
78590
22. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2017-18
Manufacture, supply, & delivery of un-plasticized Non-Pressure Polyvinyl Chloride(PVC-U) pipes of
dark (any shade of Brown) for use in underground drainage & sewerage system conforming to IS
15328/2003) with Elastomeric Seal Ring Joints (Ringtite PVC Pipes)as per specification inclusive of
transportation to the Sub-Divisional stores any where in A.P, excluding Central Excise Duty, Cess,
& VAT etc.,
78590
1 Socket and Spigot Centrifugally Cast (Spun) Iron pressure pipes for water, Gas and Sewage
conforming to specification No: IS 1536/1989 (third revision) with amdt. No: 1 & 2 in standard
lengths of 3.66 m, 4 m, 4.5m, 5 m, 5.5 m & 6 m and details given below, suitable either for lead
jointing or rubber gasket (push on) jointing at purchasers option at ex-factory excluding
transportation, taxes & duties.
Nominal dia (in MM) Rmt LA Class (Rs) A Class (Rs) B Class (Rs)
80 Rmt 792 861 923
100 Rmt 982 1081 1153
125 Rmt 1267 1383 1490
150 Rmt 1529 1676 1806
200 Rmt 2237 2427 2626
250 Rmt 3015 3282 3550
300 Rmt 3888 4250 4605
350 Rmt 4897 5312 5761
400 Rmt 5960 6512 7031
450 Rmt 7186 7894 8516
500 Rmt 8412 9164 9915
600 Rmt 11210 12238 13257
700 Rmt 14467 15806 17075
750 Rmt 16202 17714 19217
800 Rmt 18138 19762 21377
900 Rmt 22092 24104 26117
1000 Rmt 26541 28994 31334
2 Conveyance of Centrifugally Cast (Spun) Iron Pressure Pipes and accessories including loading at
Factory, un-loading at site and stacking for the following sizes. (The Minimum distance/lead in Km
for destination below 100 Km to be taken as 100 Km)
Description Class
Nominal dia (in MM) Rmt LA A B
80 Rmt 0.25 0.25 0.25
100 Rmt 0.25 0.25 0.25
125 Rmt 0.38 0.38 0.38
150 Rmt 0.38 0.38 0.38
200 Rmt 0.64 0.64 0.64
250 Rmt 0.77 0.77 0.77
300 Rmt 1.02 1.02 1.02
350 Rmt 1.40 1.40 1.40
400 Rmt 1.65 1.65 1.65
450 Rmt 1.91 1.91 1.91
500 Rmt 2.29 2.29 2.29
600 Rmt 2.29 2.29 2.29
700 Rmt 2.29 2.29 2.29
750 Rmt 3.81 3.81 3.81
800 Rmt 6.48 6.48 6.48
900 Rmt 6.48 6.48 6.48
1000 Rmt 6.48 6.48 6.48
Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate.
Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*1.0
Where M= Weight of pipe in kg per metre.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
P2 = Revised rate of pipe in Rs. per Rmt.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation of SSR =Rs. 22000
28000.00
24. SoR FOR DUCTILE IRON PRESSURE PIPES FOR THE YEAR 2017-18
1 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage
with Socket Spigot ends conforming to IS.: 8329/2000 in standard working
lengths of 4, 5 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint
(rubber gasket d jointing) with cement mortar lining inside the pipes with outside
zinc coating. Rates are ex-factory, excluding transportation, taxes & duties
Nominal Dia in mm Rmt K7 K9
100 Rmt 868 1033
150 Rmt 1233 1528
200 Rmt 1675 2040
250 Rmt 2247 2678
300 Rmt 2911 3424
350 Rmt 3665 4269
400 Rmt 4447 5147
450 Rmt 5345 6157
500 Rmt 6368 7163
600 Rmt 8473 9449
700 Rmt 10960 12209
750 Rmt 12277 13702
800 Rmt 13572 15121
900 Rmt 16558 18440
1000 Rmt 19632 21864
1100 Rmt 23396
1200 Rmt 27348
2 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage
with plain ends conforming to IS:8329/2000in standard working lengths of 4, 5,
5.5 & 6 meter for classification K9 & K7 with cement mortar lining inside the pipes
with outside zinc coating. Rates are ex-factory, excluding transportation, taxes &
duties.
Nominal Dia in mm K7 K9
100 Rmt 741 948
150 Rmt 1094 1393
200 Rmt 1513 1892
250 Rmt 1970 2512
300 Rmt 2616 3208
350 Rmt 3283 3986
400 Rmt 3971 4803
450 Rmt 4754 5677
500 Rmt 5657 6774
600 Rmt 7489 8744
700 Rmt 9910 11093
750 Rmt 11081 12429
800 Rmt 12256 13723
900 Rmt 14820 16593
1000 Rmt 17619 19727
1100 Rmt 21029
1200 Rmt 24474
3 Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for
water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of
1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with
outside zinc coating. ratesareex-factory, excluding transportation, taxes & duties.
SIZE IN MM UNIT K7 K9 K9
100 Per 0.23 0.23 0.35
KM/RMT
150 Per 0.35 0.35 0.46
KM/RMT
200 Per 0.35 0.46 0.69
KM/RMT
250 Per 0.46 0.58 0.92
KM/RMT
300 Per 0.69 0.69 1.16
KM/RMT
350 Per 0.81 0.92 1.39
KM/RMT
400 Per 0.92 1.04 1.62
KM/RMT
450 Per 1.16 1.27 1.96
KM/RMT
500 1.39 1.50 2.31
Per
600 KM/RMT Per 1.96 1.96 3.00
KM/RMT
700 Per 2.89 2.89 4.39
KM/RMT
750 Per 3.47 3.47 5.31
KM/RMT
800 5.89 5.89 8.78
Per
900 KM/RMT Per 5.89 5.89 8.78
KM/RMT
1000 Per 5.89 5.89 8.78
KM/RMT
1100 Per 5.89 5.89 -
KM/RMT
1200 Per 6.30 6.30
5 KM/RMT
Supply and Delivery of Polyethylene (PE) Sleeves for Ductile Iron Pipes used to
guard the pipe against corrosion.
Nominal Dia in mm
100 Rmt 45
150 Rmt 55
200 Rmt 70
250 Rmt 81
300 Rmt 89
350 Rmt 100
400 Rmt 140
450 Rmt 140
500 Rmt 169
600 Rmt 169
700 Rmt 220
750 Rmt 220
800 Rmt 220
900 Rmt 250
1000 Rmt 250
1100 Rmt 308
6 Additional price for HAC(high alumina cement motar lining
Nominal Dia in mm
100 Rmt 67
150 Rmt 88
200 Rmt 108
250 Rmt 129
300 Rmt 138
350 Rmt 157
400 Rmt 216
450 Rmt 216
500 Rmt 266
600 Rmt 266
700 Rmt 341
750 Rmt 341
800 Rmt 341
900 Rmt 389
1000 Rmt 389
1100 Rmt 389
1,200.00 Rmt 389
Note: The duties and taxes as applicable shall be added as per rules at the time
of preparation of estimate. Price Variation Formula due to Increase / Decrease in
the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per metre as per I.S.8329-1994/2000.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation
of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation
of SoR Rs.28000
28000.00
25. SoR FOR DUCTILE IRON FITTINGS FOR THE YEAR 2017-18
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having
dimensions as per table. The rates mentioned here under are for fittings, zinc
coated externally with inside mortar lining (with finishing as per class 13/IS
9523/2000) ( ex-works) Excluding Transportation, Taxes and Duties etc.
V DI Flanged Spigot
Upto 500 mm dia Kg 112.76
Above 500 mm dia Kg 125.76
28. S o R FOR WATER HAMMER CONTROL DEVICES FOR THE YEAR 2017-18
1 Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves
(QRDA) as per AWWA, Ex-factory excluding trasportation, Central Excise duty and sale tax etc.,
complete.
DIA IN MM Rate/Each Rs. Rs. Rs. Rs.
100 70689 81294 89422 98361
150 107425 123539 135892 149481
200 114661 131858 145046 159550
2 Conveyance of valves and accessories including loading 5% on basic cost of valves
at factory and unloading, stacking at site of work.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate
PN 1.0 PN 1.6
(MPa) (MPa)
Rate/Each
DIA IN MM Rs. Rs.
450 168080 210100
500 210980 263725
600 270380 337975
700 520080 375100
800 674080 650100
900 875380 705100
1000 1425380 842600
1100 1645380 960850
1200 1865380 1094225
Supply, Delivery of D,I double flanged short/Long body or Wafer Type pattern Butterfly Valves
for the following dia. conforming to IS 13095 (with up to date amendments, if any) manually
2 operated having Body, Disc with D.I; Shaft, Seating ring, internal fastenings with Stainless
steel (IS: 6603); External bolting with Carbon steel; Seat with Nitrile or EPDM rubber;
excluding transportation and all taxes, complete.
3 Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of
following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body,
Cover, Door, Bearing holder with D.I; Hinge pin, Door pin , Door suspension pin with Stainless
Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded
Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel;
excluding transportation and all taxes complete.
30. S o R FOR VALVES FOR HEAVY USUAGE in WTPs, STPs, Pump houses,
Pumping Mains & ELSRs 2017-18.
1 Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body
and Bonnet of Ductile Iron GGG-40/SG- 400/15 or GGG-50/SG-500/7 or equivalent as per
IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade
EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the
Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to
face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded
Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket
Less Straight through body Passage conforming to Design standards of DIN-
3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and
transportation
DIA IN MM PN 10 PN 16 PN 25
a) Without By-Pass
80 11880 14850 23760
100 16280 20350 32560
150 21780 27225 43560
200 27280 34100 54560
250 39380 49225 78760
300 56980 71225 113960
b) With By-Pass
350 67980 84975 135960
400 104280 130350 208560
450 149380 186725 298760
500 206580 258225 413160
550 303380 377520 606760
600 369380 461725 738760
650 438680 548350 877360
700 548680 685850 1097360
750 850850 935935 135960
800 1100000 1210000 208560
850 67980 84975 298760
900 104280 130350 413160
1000 149380 186725 606760
1100 206580 258225
1200 303380 377520
4 Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade
GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double
eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of
nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions,
Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy
coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns
applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS
13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per
EN 1092-2/ IS 1538 the Valve should be suitable for buried application
NOTE: -All the prices are ex-go down /ex-factory. Excise duty and CST /Local Tax Extra as
applicable at the time of supply. Packaging and Transportation extra at 5% on basic cost. The
duties and taxes as applicable may be added as per rules at the time of preparation of estimate. The
grade of DI & conformation to specifications shall be certified by a third party Quality Control Agency
approved by indenting authority at the cost of supplier.
31. SoR FOR SFRC MAN-HOLE FRAME WITH COVERS FOR THE
YEAR 2017-18
S.No. Description Unit
SoR for 2017-18
II Manufacture as per
company’s standard
specification supply and
delivery of encapsulated
plastic steps for man holes
anywhere in A.P. including
cost of materials packing as
per company’s standards, Each
166.00
loading, transportation,
unloading and stacking at site
of work etc, complete but
excluding taxes such as sales
tax, C.E.D and others etc., as
applicable.
Nominal Dia.In MM
50 Each 4826
80 Each 5282
100 Each 6900
125 Each 8800
150 Each 9777
200 Each 13864
250 Each 16504
300 Each 26409
Description
S. No. Unit SoR for 2017-18
Note : The duties and taxes as applicable shall be added as per rules
at the time of preparation of estimate
Feb.18
IPES FOR THE YEAR 2016-17
7530
9479
13407
14760
16520
18959
22340
23670
25590
33990
55000
DER) CONCRETE PIPES FOR THE YEAR 2017-18
st of pipes, excluding transportation, laying, jointing, testing, bends, tees, specials, taxes & duties etc,.
acture shall design the pipes as per the IS Code 784-2001).
8
10 Kg/cm2 12 Kg/cm2 14 Kg/cm2
4974 5024 5055
5356 5397 5458
5749 5800 5861
6707 6779 6850
7684 7776 7877
9054 9176 9308
10376 10538 10701
12483 12687 12880
13948 14191 14435
15592 15877 16161
17518 17854 18499
19783 20620 21152
23206 24070 24569
26804 27374 28013
28922 29553 30903
33940 34662 36174
36720 38333 39217
38957 40733 41728
er rings, cost of transportation of water and emptying pipe line after completion of field testing etc.
ading at factory, un-loading at site and stacking for the following sizes.(minimum distance of 100 km
nce is less by 100 km from factory to site)
1.16 1.16 1.16
1.16 1.16 1.16
1.68 1.68 1.68
1.89 1.89 1.89
3.05 3.05 3.05
3.05 3.05 3.05
3.05 3.05 3.05
4.83 4.83 4.83
4.83 4.83 4.83
9.45 9.45 9.45
9.45 9.45 9.45
9.45 9.45 9.45
9.45 9.45 9.45
9.45 9.45 9.45
11.45 11.45 11.45
11.45 11.45 11.45
11.45 11.45 11.45
12.08 12.08 12.08
HT wire HR coil
owing raw materials cost. 53500 46000
HT Wire =(H2-H1)/1000 X
R2= Variation
R1)/1000 X Wr.
R3= Variation
C1)/1000 X Wc .
1 = Rs. 52,500/- H2 =
stimate.
s. 41500/- R2 = Cost of
.
C2 = Cost of Cement
5 - 2002, Ex-factory excluding transportation, taxes and duties etc., for Bar wrapped steel cylindrical pipes.
Rs. Rs. Rs.
18 Kg/cm2 20 Kg/cm2 22 Kg/cm2
2493 2493 2493
2789 2789 2904
3967 4173 4369
4673 4940 5037
4462 4712 4982
5113 5440 5776
6848 7316 7800
8613 9378 10073
10692 11771 12602
12907 14109 15395
15746 16972 18315
18906 20743 22033
21616 23454 25498
site welding and fixing of Polypropylene Diaher cloth, cost of transportat ion of water and emptying pipe line
er completion of field testing.
Cement =(C2-C1)/1000 X Wc
he time of preparation of estimate. W1
ime of preparation of estimate .
taxes and freight) at the time of
uired (Kg.) per metre of pipe. Wc=
ation of estimate.
5000.00
16 kg/ sqcm
uding transportation to
Supply upto 90 mm dia
23
38
61
94
145
228
323
467
702
905
1137
1483
1871
2306
2920
3604
4522
5717
7301
9429
11873
14364
16 kg/ sqcm
218
309
447
634
820
1029
1340
1695
2089
2647
3260
4094
5177
6568
8649