RC 2200 is a rubber compound used to seal fasteners, laps, and penetrations on various roof surfaces. It is a one-component product with excellent adhesion and resistance to cracking, peeling, and weathering. RC 2200 can be applied by brush, trowel, or spray and provides strong physical properties to reduce re-applications. It is approved for use on metal, modified bitumen, single-ply, and urethane foam roofs.
RC 2200 is a rubber compound used to seal fasteners, laps, and penetrations on various roof surfaces. It is a one-component product with excellent adhesion and resistance to cracking, peeling, and weathering. RC 2200 can be applied by brush, trowel, or spray and provides strong physical properties to reduce re-applications. It is approved for use on metal, modified bitumen, single-ply, and urethane foam roofs.
RC 2200 is a rubber compound used to seal fasteners, laps, and penetrations on various roof surfaces. It is a one-component product with excellent adhesion and resistance to cracking, peeling, and weathering. RC 2200 can be applied by brush, trowel, or spray and provides strong physical properties to reduce re-applications. It is approved for use on metal, modified bitumen, single-ply, and urethane foam roofs.
RC 2200 is a rubber compound used to seal fasteners, laps, and penetrations on various roof surfaces. It is a one-component product with excellent adhesion and resistance to cracking, peeling, and weathering. RC 2200 can be applied by brush, trowel, or spray and provides strong physical properties to reduce re-applications. It is approved for use on metal, modified bitumen, single-ply, and urethane foam roofs.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1of 1
RC 2200
RUBBER SEAM COMPOUND
RC 2200 is a unique rubber compound that is extremely effective for sealing fasteners, laps and penetrations on various roof surfaces. It is a one- Component product that has excellent adhesion to properly prepared substrates. RC 2200 is thermally stable and resists cracking and peeling due to ozone and ultraviolet exposure. It is typically top-coated with RC 2000 Rubber Roof Coating for maximum weather resistance. RC 2200 has excellent physical properties and reduces costly re-applications. It is available in Brush, Trowel and Spray grade.
TYPE OF APPLICATIONS: Type of Resin. . . . . . . . . . . . . . . . . . . .Synthetic Rubber
•Metal Buildings and Roofs Color . . . . . . . . . . . . . . . . . . . . . . . . . . White •Modified and BUR Roofs Elongation . . . . . . . . (ASTM-D-412). . 530% •Urethane Foam roofs Tensile Strength . . . .(ASTM-D-412). . 1780 PSI Permeance (35 mils) (ASTM-E-96) . . 0.148 perms •Single Ply roofs Reduction. . . . . . . . . . . . . . . . . . . . . . None RC 2200 is Miami-Dade Product Control GRADE: BRUSH TROWEL SPRAY Approved. It is also approved by the State of Flash Point. . . . . . . 101°F . . . . . . 101°F. . . . . . . 101°F Florida Specific Gravity. . . . 1.05. . . . . . . . 1.07 . . . . . . . . 1.03 Weight (lb./gal.). . . . 8.76 . . . . . . . 8.96 . . . . . . . 8.56 SURFACE PREPARATION: Solids(%/Weight) . . 57±1% . . . . . 63±1%. . . . . . 50±1% The surface must be free of any oils, moisture, Solids(% by Vol.) . . 45±1% . . . . . 51±1%. . . . . . 38±1% rust scale, soil or other contaminates that may Viscosity*. . . . . . . . 12,000 . . . . . . 50,000. . . . . . .5,600 interfere with good adhesion. Remove any loose *Centipoise @ 100°F material from seams or other surfaces with a wire brush or scraper. Oil and grease should also be WET ADHESION (ASTM C 794/D 903) removed with solvents or an appropriate Metal . . . . . . . . . . . . Pass detergent cleaner. In many cases high pressure EPDM . . . . . . . . . . . . Pass water blast will be sufficient to prepare the TPO . . . . . . . . . . . . . Pass surface. Hypalon . . . . . . . . . . Pass
APPLICATION TEMPERATURE: HANDLING and STORAGE:
For best results, the temperature of the ambient RC 2200 contains a blend of solvents, which is air and the substrate should be within a range of considered combustible by D.O.T. and O.S.H.A. 40°-110°F. Although lower temperatures can be standards. It should be used and stored away from used for brush or trowel applications, it is flames in a well-ventilated area. Avoid prolonged recommended that the product temperature of the breathing of vapors and prevent contact with eyes. Spray Grade be a minimum of 60°F before Read all label information and precautions before applying. using. The specifications, properties and performance of materials described APPLICATION METHODS: herein are based on information believed to be reliable. Unless Depending on the grade selected, RC 2200 can otherwise expressly provided in written contract, the products discussed be sprayed, brushed or troweled onto the surface. are sold without conditions or warranties, expressed or implied. Product Apply heavy, uniform coat over fasteners, seams, specifications are subject to change without notice. etc. See Inland Application Bulletins for additional information. Form:#LC2200-5 Revision:03/07
www.inlandcoatings.com P.O. Box 247, ADEL, IA 50003 (800)456-8467 FAX: (515)993-4324