RTN 910+950+980
RTN 910+950+980
RTN 910+950+980
RTN 910
RTN 910 (IDU 910)
The RTN 910 is Networking IP radio equipment. It bases on unified platform •• Supports abundant OAM features, including Eth OAM, MPLS OAM, ATM OAM,
for TDM/Hybrid/Packet, provides several types of service interfaces and facilitate PW OAM, making management and maintenance in IP networks similar to
installation and flexible configuration. It can provide a solution which integrate those in SDH networks
the TDM microwave, Hybrid microwave, and Packet microwave base on the
requirements. Thus, RTN910 can meet the requirements of not not only GSM and Complete Protection Schemes
UMTS networks, but also future LTE networks. •• Protections for radio links
1+1 HSB/SD/FD protections
Architecture 2+0,1+1, 2x(1+0) protections
XPIC 1+1
•• Network-level protections
The RTN 910 adopts a split structure. The system consists of the IDU 910 and the Ethernet Ring Protection Switching protection and MSTP protection
ODU, IDU910 provides multiple features with different cards, supports convergence LAG protection for Ethernet services
of up to 2 RF directions within 1U pizzabox[442mm(W)×220mm(D)×44mm(H)] MPLS 1:1 tunnel protection
TDM SNCP protection (including SDH link and radio link)
IMA protection for ATM over E1 services
Features Linear MSP
•• Equipment-level protections
1+1 hot backup for the power input
Unified platform for TDM/Hybrid/Packet, meeting the
requirements of network evolution towards All-IP backhaul Easy Installation
•• Supports the processing and accessing of native TDM services, native Ethernet •• The RTN 910 can be installed in any standard telecom cabinet,or outdoor cabinet,
services and PWE3 services on a desktop/pole/wall
•• Supports multi-mode microwave radio: Hybrid mode (E1+Eth), pure Packet •• The RTN 910 and wireless basestation can share one cabinet
mode, PDH mode and SDH mode
•• Provides packet-based IEEE 1588v2 clock synchronization, facilitating cost- Easy Maintenance
effective clock solutions for 3G/LTE base stations •• Supports different types of loopbacks at the service port and the IF port
•• Supports RMON performance events and the MPLS OAM functions
Large-Capacity and Broadband-Oriented Microwave Platform •• Supports MPLS OAM, IEEE 802.1ag, IEEE 802.3ah
•• Adopts highly efficient encapsulation and advanced header compression •• Supports ITU-T Y.1731
technologies, boosting the maximum capacity on one carrier to over 1Gbps •• Supports ATM OAM
•• Support XPIC technology,double the capacity to 2Gbps on one carrier •• Provides a built-in test system to perform the pseudo-random binary sequence
•• Support Air-LAG (PRBS) error test at the E1 port and the IF port
•• Provides hitless switching from QPSK to 1024QAM with Adaptive Modulation •• Provides the hot-pluggable CF card, which stores data configuration files and
(AM), in all channels sizes and all frequencies, priority levels can be set for native software. The CF card can be changed for data loading or software upgrade
E1 services and packet services •• Supports remote data and software loading by using the NMS. Thus, the entire
network can be upgraded rapidly, achieves in-service software upgrades
Robust IP Service-Processing Capability
•• Supports E-line or E-LAN services based on VLAN, QinQ. Supports E-line services Multiple Methods for Network Management
based on PW •• Uses the iManager U2000 to manage the RTN devices and Huawei optical
•• Supports basic MPLS functions and service forwarding, and support static LSPs transport devices. Hence, quick fault locating, quick service provisioning, and
•• Adopts the LSP tunnel technology and the PWE3 technology to form an MPLS visual IP service management are achieved while reduce the OPEX
network, where multiple services can be accessed •• Uses the Web LCT to manage a single RTN NE or multiple RTN NEs in a
•• Supports 8-class QoS, provides a wide range of services, and ensures the quality centralized manner
of services of high priority •• Enables users to query alarms and performance events through the simple
•• Supports EOS/EOPDH network management protocol (SNMP)
•• Supports Eth. LAG •• Adopts the inband DCN scheme. Hence, dedicated DCN channels are not
•• Supports VLAN-sub interface required, and the network construction cost is reduced
Technical specifications
Frequency Band 6GHz, 7GHz, 8GHz, 10GHz/10.5GHz, 11GHz, 13GHz, 15GHz, 18GHz, 23GHz, 26GHz, 28GHz, 32GHz, 38GHz,42GHz
Channel Spacing (MHz) 3.5MHz, 7 MHz, 14MHz, 28MHz, 40MHz, 56MHz
Modulation Mode QPSK, 16QAM, 32 QAM, 64QAM, 128QAM, 256QAM,512QAM*,1024QAM*
E1 interface TDM E1, Smart E1(CES E1, IMA E1 ML-PPP E1*)
SDH interface STM-1 optical/ electrical interface, STM-4 optical interface*
FE interface: 10/100BASE-T(X), 100BASE-FX
Interface Type Ethernet interface
GE interface: 1000Base-SX, 1000Base-LX, 10/100/1000BASE-T(X)
Auxiliary interface Order wire interface, external clock input/output interface, IEEE 1588v2 clock input/output interface
Alarm interface External alarm 3 input/1 output interface
PDH interface: 96×E1
Maximum Interface SDH interface: 6×STM-1, 4×STM-4*
Ethernet interface: 20×FE , 6×GE
Switching capacity: 4.2Gbit/s
Maximum Capacity
TDM cross connection capacity: 8×8VC-4, full timeslot cross-connections at the VC-12/VC-3/VC-4 level
RF Direction A maximum of 2 RF directions
2× (1+0) configuration
2+0 configuration
Configuration 1+1 configuration
XPIC configuration
1+1 configuration: 1+1 HSB, 1+1 FD, 1+1 SD, XPIC 1+1
Ethernet II, IEEE 802.3, and IEEE 802.1q/p service frame formats
E-Line and E-LAN Ethernet services
Adding, deletion, and exchange VLAN tags (IEEE 802.1q/p)
Ethernet Function
Flow control ( IEEE 802.3x)
Link aggregation group (LAG)
RMON ( IETF RFC 2819)
Simulation of TDM E1 and ATM/IMA E1 services
PWE3 Encapsulation of Ethernet services over LSP tunnel, support E-Line
Static PW
IP DSCP/IP TOS, MPLS EXP, VLAN 802.1p
QoS CAR and traffic policing in color-blind or color-aware mode
8 classes for queue scheduling
Number of VLAN tags: 4,094
Number of tunnels (including MPLS tunnel, TMPLS tunnel, IP tunnel, and GRE tunnel): 1024
Number of CESs: 80
MPLS Capacity
Number of PWs: 1,024
Number of E-lines: 1,024
Number of APS protection groups: 32
Dimensions: 442 mm (width) x 220 mm (depth) x 44 mm (height)
Dimensions and Weight
Weight:4.1kg
IDU –5°C ~ +60°C
Working Temperature
ODU –33°C ~ +55°C
IDU 5% ~ 95%
Relative Humidity
ODU 5% ~ 100%
Power Supply –38.4 V ~ –72 V
Heat Dissipation Fan cooling
Maximum Working Altitude 4,500 m
* available in roadmap
HUAWEI TECHNOLOGIES CO., LTD.
RTN 950
RTN 950 (IDU 950)
The RTN 950 is Networking IP radio equipment. It bases on unified platform •• Supports VLAN-sub interface
for TDM/Hybrid/Packet, supports a maximum of 6 RF directions. provide several •• Supports Eth. LAG
types of service interfaces with facilitate installation and flexible configuration. It •• Supports abundant OAM features, including Eth. OAM, MPLS OAM, ATM
can provide a solution which integrate the TDM microwave, Hybrid microwave, OAM, PW OAM, making management and maintenance in IP networks similar
and Packet microwave base on the requirements. Thus, RTN950 can meet the to those in SDH networks
requirements of not only GSM and UMTS, but also future LTE networks.
Complete Protection Schemes
•• Protections for radio links
Easy Maintenance
Large-Capacity and Broadband-Oriented Microwave Platform
•• Supports different types of loopbacks at the service port and the IF port
•• Adopts highly efficient encapsulation and advanced header compression
•• Supports RMON performance events and the MPLS OAM functions
technologies, boosting the maximum capacity on one carrier to over 1Gbps
•• Supports MPLS OAM, IEEE 802.1ag, IEEE 802.3ah
•• Support XPIC technology,double the capacity to 2Gbps on one carrier
•• Supports ITU-T Y.1731
•• Support Air-LAG
•• Supports ATM OAM
•• Provides hitless switching from QPSK to 1024QAM with Adaptive Modulation
•• Provides a built-in test system to perform the pseudo-random binary sequence
(AM), in all channels sizes and all frequencies, priority levels can be set for native
(PRBS) error test at the E1 port and the IF port
E1 services and packet services
•• Provides the hot-pluggable CF card, which stores data configuration files and
software. The CF card can be changed for data loading or software upgrade
Multi-directions and Network-Oriented Nodal Equipment •• Supports remote data and software loading by using the NMS. Thus, the entire
•• Supports the convergence of up to 6 RF directions network can be upgraded rapidly, achieves in-service software upgrades
•• Supports TDM cross connection and Ethernet switching
Multiple Methods for Network Management
Robust IP Service-Processing Capability •• Uses the iManager U2000 to manage the RTN devices and Huawei optical
•• Supports E-line or E-LAN services based on VLAN, QinQ. Supports E-line services transport devices. Hence, quick fault locating, quick service provisioning, and
based on PW. visual IP service management are achieved, and the OPEX is reduced
•• Supports basic MPLS functions and service forwarding, and support static LSPs •• Uses the Web LCT to manage a single RTN NE or multiple RTN NEs in a
•• Adopts the LSP tunnel technology and the PWE3 technology to form an MPLS centralized manner
network, where multiple services can be accessed •• Enables users to query alarms and performance events through the simple
•• Supports 8-class QoS, provides a wide range of services, and ensures the quality network management protocol (SNMP)
•• of services of high priority •• Adopts the inband DCN scheme. Hence, dedicated DCN channels are not
•• Supports EOS/EOPDH required, and the network construction cost is reduced
Technical specifications
Frequency Band 6GHz, 7GHz, 8GHz, 10GHz/10.5GHz, 11GHz, 13GHz, 15GHz, 18GHz, 23GHz, 26GHz, 28GHz, 32GHz, 38GHz,42GHz
Channel Spacing (MHz) 3.5 MHz, 7MHz, 14MHz, 28MHz, 40MHz, 56MHz
Modulation Mode QPSK, 16QAM, 32 QAM, 64QAM, 128QAM, 256QAM,512QAM*,1024QAM*
E1 interface TDM E1, Smart E1(CES E1, IMA E1 ML-PPP E1*)
SDH interface STM-1 optical/ electrical interface, STM-4 optical interface*
FE interface: 10/100BASE-T (X), 100BASE-FX
Interface Type Ethernet interface
GE interface: 1000Base-SX, 1000Base-LX, 10/100/1000BASE-T (X)
Auxiliary interface Order wire interface, external clock input/output interface, IEEE 1588v2 clock input/output interface
Alarm interface External alarm 4 input/2 output interface, 2 external alarm output cascading interface
PDH interface: 192×E1
Maximum Interface SDH interface: 12×STM-1, 12×STM-4*
Ethernet interface: 48×FE, 12×GE
Switching capacity: 10 Gbit/s
Maximum Capacity
TDM cross connection capacity: 32×32VC-4, full timeslot cross-connections at the VC-12/VC-3/VC-4 level
RF Direction A maximum of 6 RF directions
N× (1+0) configuration (1≤N≤6)
N+0 configuration (1≤N≤6)
Configuration N+1 configuration (1≤N≤4)
XPIC configuration
1+1 configuration: 1+1 HSB, 1+1 FD, 1+1 SD, XPIC 1+1
Ethernet II, IEEE 802.3, and IEEE 802.1q/p service frame formats
E-Line and E-LAN Ethernet services
Adding, deletion, and exchange VLAN tags (IEEE 802.1q/p)
Ethernet Function
Flow control ( IEEE 802.3x)
Link aggregation group (LAG)
RMON ( IETF RFC 2819)
Simulation of TDM E1 and ATM/IMA E1 services
PWE3 Encapsulation of Ethernet services over LSP tunnel, support E-Line
Static PW
IP DSCP/IP TOS, MPLS EXP, VLAN 802.1p
QoS CAR and traffic policing in color-blind or color-aware mode
8 classes for queue scheduling
Number of VLAN tags: 4,094
Number of tunnels (including MPLS tunnel, TMPLS tunnel, IP tunnel, and GRE tunnel): 1024
Number of CESs: 192
MPLS Capacity
Number of PWs: 1,024
Number of E-lines: 1,024
Number of APS protection groups: 32
Dimensions: 442 mm (width) x 220 mm (depth) x 88 mm (height)
Dimensions and Weight
Weight: 5.5kg
IDU –5°C ~ +60°C
Working Temperature
ODU –33°C ~ +55°C
IDU 5% ~ 95%
Relative Humidity
ODU 5% ~ 100%
Power Supply –38.4 V ~ –72 V
Heat Dissipation Fan cooling
Maximum Working Altitude 4,500 m
* available in roadmap
HUAWEI TECHNOLOGIES CO., LTD.
RTN 980
RTN 980 (IDU 980)
The RTN 980 is Networking IP nodal radio equipment. It bases on unified platform network, where multiple services can be accessed
for TDM/Hybrid/Packet, supports a maximum of 14 RF directions. provide several •• Supports 8-class QoS, provides a wide range of services, and ensures the quality
types of service interfaces with facilitate installation and flexible configuration. It of services of high priority
can provide a solution which integrate the TDM microwave, Hybrid microwave, •• Supports EOS/EOPDH
and Packet microwave base on the requirements. Thus, RTN980 can meet the •• Supports Eth. LAG
requirements of not only GSM and UMTS, but also future LTE networks. •• Supports VLAN-sub interface
•• Supports abundant OAM features, including Eth. OAM, MPLS OAM, ATM
OAM, PW OAM, making management and maintenance in IP networks similar
to those in SDH networks