1) The document provides instructions for setting up the Edimax EW-7206APg wireless access point, including connecting the access point to a computer, changing the access point's IP address, configuring the access point settings, and connecting to the access point wirelessly.
2) The setup involves connecting the access point to a computer via Ethernet, accessing the access point's configuration page by typing its IP address into a web browser, changing the access point's IP address and wireless settings, and then connecting to the access point wirelessly using WPA security.
3) The instructions for connecting wirelessly involve scanning for the access point's network on the computer, selecting the access point, and entering
1) The document provides instructions for setting up the Edimax EW-7206APg wireless access point, including connecting the access point to a computer, changing the access point's IP address, configuring the access point settings, and connecting to the access point wirelessly.
2) The setup involves connecting the access point to a computer via Ethernet, accessing the access point's configuration page by typing its IP address into a web browser, changing the access point's IP address and wireless settings, and then connecting to the access point wirelessly using WPA security.
3) The instructions for connecting wirelessly involve scanning for the access point's network on the computer, selecting the access point, and entering
1) The document provides instructions for setting up the Edimax EW-7206APg wireless access point, including connecting the access point to a computer, changing the access point's IP address, configuring the access point settings, and connecting to the access point wirelessly.
2) The setup involves connecting the access point to a computer via Ethernet, accessing the access point's configuration page by typing its IP address into a web browser, changing the access point's IP address and wireless settings, and then connecting to the access point wirelessly using WPA security.
3) The instructions for connecting wirelessly involve scanning for the access point's network on the computer, selecting the access point, and entering
1) The document provides instructions for setting up the Edimax EW-7206APg wireless access point, including connecting the access point to a computer, changing the access point's IP address, configuring the access point settings, and connecting to the access point wirelessly.
2) The setup involves connecting the access point to a computer via Ethernet, accessing the access point's configuration page by typing its IP address into a web browser, changing the access point's IP address and wireless settings, and then connecting to the access point wirelessly using WPA security.
3) The instructions for connecting wirelessly involve scanning for the access point's network on the computer, selecting the access point, and entering
Step 1: EW‐7206APg to the computer 1. Connect EW‐7206Apg directly to a computer with a LAN cable. 2. In the computer, click on Control Panel, Network Connection, Right‐click on Local Area Connection, go to it's Properties. 3. Select Internet Protocol (TCP/IP), click on Properties. 4. Select Use the Following IP Address, enter 192.168.2.2 and subnet mask is 255.255.255.0. 5. Click OK to save the setting.
Step 2: Change the IP Address of EW‐7206APg (according to your router’s IP range) 1. Login to EW‐7206APg, open Internet Explorer, at the address bar, type 192.168.2.1 and press Enter. 2. Login admin/1234. 3. Click on System Utility, change Management IP to your router’s IP range. ‐ IP Address ‐ Subnet Mask ‐ Gateway Address is your router’s IP address. ‐ For example, use 192.168.2.50, 255.255.255.0, 192.168.2.1
4. Click Apply to save the setting. Wait for 10‐15 seconds, you will see the LED light on EW‐7206APg goes off and comes back on. 5. The EW‐7206APg setup page on 192.168.2.1 will be disconnected, because EW‐ 7206APg has new IP Address (192.168.2.50). 6. Close the Internet Explorer.
Step 3: Configure the Access Point 1. In the computer, click on Control Panel, Network Connection, Right‐click on Local Area Connection, go to it's Properties. 2. Select Internet Protocol (TCP/IP), click on Properties. 3. Select Obtain IP Address Automatically and click OK to save the setting.
4. Connect the computer to the router. 5. Connect EW‐7206APg with a LAN cable to the router.
6. Login to EW‐7206Apg. Open Internet Explorer, at the address bar, type the new IP address (192.168.2.50) and press Enter. 7. Login admin/1234. 8. Click on Basic Setting, select AP. You may change the ESSID.
9. Click Apply to save the setting. 10. Configure wireless security, click on Security, select WPA pre‐shared key. • Select WPA(TKIP) • Select Passphare • Enter your Pre‐Shared Key. (You will use this key to connect to EW‐7206APg wirelessly).
Step 4: Connect to the access point with WPA Wireless Security To connect the computer to the EW‐7206APg with the WPA wireless security, please do the following:
In Windows XP with Service Pack 2
A) If you use Windows to configure the wireless connection.
1) Go to Control Panel, click on Network Connection, Right‐click on Wireless Network Connection go to it's Properties.
3) In Network Connection again, Right‐click on Wireless Network Connection and click View Available Wireless Network.
4) You will find the access point detected in the network list. And it will show that it's a secure network. Select the access point and click Connect. When it prompts you for the WPA key, enter the WPA key to connect.
B) If you use Edimax wireless adapter/card, please use the Utility to re‐connect the wireless connection with the WPA Pre‐shared Key.
Note: Windows 2000 or Windows XP with Service Pack 1 doesn’t support WPA security. If you are using Windows 2000 or Windows XP with Service Pack 1, please contact us for guideline to use WEP security.
