106 Amot 4101 Product Document
106 Amot 4101 Product Document
106 Amot 4101 Product Document
Pneumatic Indicator
Features
■ PINPOINTS TROUBLE
■ ONE MOVING PART Pinpoints trouble in pneumatic safety and sequencing sys-
tems to show that there is pressure available at a particular
point in the system. One moving part for simplicity and long-
■ FUNCTIONAL DESIGN term reliability.
OPERATION
The standard stocked unit is supplied with a combination
Application Indicator Tape (8) on the moving Flag (7) which show red
and white stripes in the window when there is no pressure.
Above 5 to 10 psi, Piston (3) is extended against Springs
■ PRESSURE ON/OFF INDICATOR (11) and seals on O-ring (2). The Flag moves with the piston
which exposes a solid green tape in the indicator window.
Additional tapes are supplied with each unit which can be
used to reverse the indication or to show a Open-closed or
On-Off.
Form 639
INSTALLATION SPECIFICATIONS
The 4101 is simple to install but a note of caution is
Standard Materials - Bracket .................. Stainless Steel
necessary. To install, remove the Bezel (12) and place in
Body .............................. Aluminum
a 1-3/4” diameter cutout. With Setscrews (16) backed out
Bezels ................................... Nylon
all the way, place the indicator on the inside of the panel in
Seals .................................. Buna N
a proper relationship to the back of the bezel and Bezel
Window ............................... Acrylic
Screws (15). Tighten the Bezel Screws in the tapped body
Screws ................... Stainless Steel
holes, making sure that the Screws do not bend or blind
the Indicator Flag.
Operating Pressure - Maximum ............... 10 psi (69kPa)
Minimum ......... 250 psi (1723 kPa)
When the Bezel screws are firmly in place, tighten Setscews
(16) against the back of the panel until the indicator is
Net Weight ................................... 0.55 lb (0.25)
locked securely in place.
Diagram
MODEL CODE SYSTEM HOW TO ORDER
NOTE:
Letters or numbers in the MTO space, other than nothing,
AI or AA, indicate the unit is built to special requirements
and some of the other code numbers may not be valid.
Check with the factory for full specification of such models.
SERVICE PARTS
Hawk-ITM
G Valve
• Programmable Controller with Powerful Embedded Functions
• Class 1, Div. 2 Hazardous Area Certified
• Ultra Compact Control • Discrete and Analog I/O, Built-In Operator Interface
Valve and Actuator • Communicates via RS 232 / MODBUS
• Six Piping Options • Seamless Programming with Windows Based Software
• Sizes from 2" to 16" Inch • Enhanced Ladder Logic and Built in Function Blocks
• Electric or Pneumati
c Actuation Dramatically Reduce Programming Time