Steps For Eliminating Dongle On Windows 7
Steps For Eliminating Dongle On Windows 7
Steps For Eliminating Dongle On Windows 7
Windows 7
There are 3 main steps as follows:
Install Strand7 as usual
Install MultiKey dongle emulator
Sign driver by [Driver Signature Enforcement Overrider]
1. Install Strand7
Using setup.exe to install Strand7. After finish, please don’t use it
immediately because you still don’t have dongle emulator
2. Install MultiKey dongle emulator
Register 725F583A.reg into Registry
Click start button , type uac, then press Enter. It will show User
Account Control Settings, please slow down UAC level as follows:
Install MultiKey32 or MultiKey64 (it depends on your OS, for example
Windows 7 32 bit, Windows 7 64 bit). If your OS is 64 bit, then open folder
MultiKey64 and do as follows:
You wait for a while, you will see a popup asking you to install a unsigned
driver. You must accept to install it anyway. And then, you wait for finishing
driver installation successfully.
3. Sign driver by [Driver Signature Enforcement Overrider]
You execute dseo13b.exe and do as follows:
Select [Enable Test Mode] and click Next button
Select [Sign a System File] and click Next button
Find [C:\Windows\System32\drivers\multikey.sys] in your OS, it must exist
in your OS. If it doesn’t exist, please reinstall MultiKey again.
Input in the textbox [C:\Windows\System32\drivers\multikey.sys], click OK
Select [Exit] and click Next button to exit
Now you have to restart your PC, hold down F8 key on your keyboard, you
will see the Advanced Boot Options screen, you select [Disable Driver
Signature Enforcement] as follows:
Press Enter to boot Windows. After Windows is booted it will install the
unsigned driver automatically. You should verify the new driver as follows:
Presse key combination Windows + R, type devmgmt.msc, press Enter. It
should show
Now you can open Strand7, input exact keycode and enjoy it.
Good luck :)