Instruction Manual of Digital Alarm Clock Nikkei Nr05We
Instruction Manual of Digital Alarm Clock Nikkei Nr05We
Instruction Manual of Digital Alarm Clock Nikkei Nr05We
NIKKEI NR05WE
MAIN FEATURE
A. SNOOZE-LIGHT BUTTON
-Press to activate the 5-minute Snooze function when alarm goes off.(1-20 minutes are available)
B. CLOCK WINDOW
C. ALARM FUCTION
-Press and hold for 2 seconds to enter the alarm time setting mode when
-Press UP “ “ and down “ “ button to your desire hour then press ALM-SET and use same way to set minute,press
ALM-SET to finish alarm setting.
D. SET BUTTON
-Press and hold for 2 seconds to enter the clock setting mode
12/24 hour pattern› hour and minute › year › month and day
-Press to activate or deactivate the alarm when the respective alarm time
is shown
F.MEMORY BUTTON
-Press to switch the maximum and minimum centigrade degree and Fahrenheit degree
G. BATTERY COMPARTMENT
BATTERY INSTALLATION
Insert Three "AAA" Alkaline battery according to the polarity indicated in the
battery compartment
Press the SNOOZE-LIGHT button to turn on the LED backlight for 5 seconds.
Press and hold the SET button to 2 seconds. The offset time will appear.
Press the SET button again. The 12hr or 24hr display will blink. Press the up
USER MANUAL
1.Press and hold the SET button for 2 seconds. The 12hr 24 hr mode will blink. If in 12hr mode the PM indicator will show
afternoon hours.The PM indicator will not show for morning hours. Press the up or down button to reach the desired hour.
2. Press the SET button again. The hour will begin to blink. Press the up or down button to reach the desired hour.
3.Press SET button again, then minute will blink. Press the up or down button to reach the desired minutes.
4. Press the SET button again. The year will begin to blink. Press the up or down button to reach the desired year.
5Press the SET button again. The day will begin to blink. Press the up or down button to reach the desired day.
6.Press SET button again, then month will blink. Press the up or down button to reach the desired month.
NOTE: You may press the SET button anytime to exit the setting mode.
For the Single Alarm, it will go off only once at the preset time.
1. Press the ALM-SET button. The single alarm icon will appear.
2. Press and hold the ALM-SET button for 2 seconds to enter the setting mode.
The hour will begin to blink. Press the up or down button to reach the desired hour.
3. Press the ALM-SET button again. The minute will begin to blink. Press the up or down arrow to reach the desired minute.
Press the ALM-SET button again to exit the single alarm setting mode.
Press the ALM-SET button until the alarm time will appears at the meantime press the up button to activate or deactivate
the chosen alarm. If alarm sign is disappears, the alarm has been deactivated.
In case of malfunction or abnormal display, take out and re-install the batteries again. All settings will be cleared and reset
to their default values.
MAINTENANCE
1. Do not immerse the unit in water. If the unit comes in contact with water,
2. Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning
agents may scratch the plastic parts and corrode the electronic circuit.
4. Do not tamper with the unit’s internal components. Doing so will terminate
the unit’s warranty and may cause damage. The unit contains no user -
serviceable parts.
SPECIFICATIONS
Clock Functions
General Specification
CAUTION
notice.
Printed in China