TK103 User Manual PDF
TK103 User Manual PDF
TK103 User Manual PDF
Preface
Thank you for purchasing our GPS vehicle tracker. This manual shows how to operate the
device smoothly and correctly. Make sure to read this manual carefully before using this
product. Please note that specification and information are subject to changes without prior
notice in this manual. Any change will be integrated in the latest release. The manufacturer
assumes no responsibility for any errors or omissions in this document.
Content
1. Summary functions
2. Applications
3. Hardware descriptions
4. Specifications
5. Usage
5.1 SIM card installation
5.3 Start up
5.4 Initialization
5.6 Authorization
5.11 Geo-fence
6 Cautions
1 Summary function
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate
and monitor any remote targets by SMS or GPRS.
1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to
locates at times, and get the working status. You can choose the Positioning Platform by
yourself.
1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you
can put on the button and the installed unit will send out alarm to the authorized numbers.
1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS
in anywhere and anytime.
1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it
connects, you can monitor the sound around 5 meter.
1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the
vehicle is moving, the unit will send the movement alert to all authorized numbers.
1.6 Over speed Alert: Send SMS to the unit to start the movement alert function. When the
vehicle is over speed, the unit will send the over speed alert to all authorized numbers.
1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The
unit will send the message to all authorized numbers when it reaches the district.
1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
1.10 Mileage statistics; ACC checking; cutting off power and alarm.
1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original
anti-theft alarm warning.
1.12 Modify the IP and Port of Communication Protocol for different on-line positioning
platform
2. Application
4. Specification
Content Specifications
Dimension 86mm *63mm *25mm
Weigh 0.51kgs
Network GSM/GPRS/GPS
Band 850/1800/1900Mhz or 900/1800/1900Mhz or
850/900/1800/190
GPS chip SIRF3 UBLOX
GSM/GPRS module Simcom900a or Simcom800w
GPS sensitivity -159dBm
GPS accuracy 5m
Time To First Fix Cold status 45s
Warm status 35s
Hot status 1s
Work voltage DC10V—36V
Battery 3.7V / 1500mAh
Standby <50mA
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +70°C
Humidity 5%--95%RH
5. Usage
Installation steps (caution: the following installation should under no power, otherwise will be
dangerous)
Wire for cutting off oil of the tracker Yellow Wire for cutting off circuit of the tracker
wire connects the relay feet 86; 85 feet to 12
V DC anode, 87A feet and 30 feet in series in White wire connects relay feet 86; 85 feet to
the supply oil circuits. 12 V DC anode, 87A feet and 30 feet are in
series in the supply Power circuits.
5.3 Start-up
5.3.3 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module
is in standby mode. When the blue indicator is keep shine, the unit has been located.
5.3.4 When this unit receives GPS signals normally, you can use it and do all the following
settings.
5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the
settings. (Default
password: 123456)
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the
password.
5.5.2 You can Send "resume+password" to the tracker, to restore the original setting in case
of losing the new password.
5.6 Authorization
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized
number automatically.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone
number, for example,
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a
Geo-info; If there is already an authorized number, then it will not respond when an
unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real
real-time
Geo-info as below:
Report a Geo-info
info at 30s intervals to the authorized numbers for 15 times:
5.8.1 Set up: Send SMS "at30sum15 " to the unit, it will report the Geo-info
Geo info at 30s intervals
for 15 times. The setting must be maximum 65535 in value.
5.8.2 Send SMS"at30sum0" to the unit, it will reply SMS heaps of times.
Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456
5.10.1The
The default mode is "tracker".
5.10.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and
switch to “monitor”mode.
5.10.3 Send SMS "tracker+password"to the unit, it will reply “tracker ok!” and restore to
“track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send
the message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user
can Send SMS "stockade+password+space+longitude,latitude;longitude,latitude" to
unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info”
to the authorized numbers.
Remark : The first longitude& latitude is coordinate of the top left corner of the Geo-fence,
while the second longitude&latitude is the coordinate of the bottom right corner. It will alarm
one time in each setting.
This function will be out of effect after the unit moves outside the district.
5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user
can send SMS "move+password"to the unit, then the unit will reply “move ok!”. In case of
such a movement, it will send SMS “Move” along with a Geo-info to the authorized numbers.
It will alarm one time in each setting.
Remark: This function will be out of effect after the unit moves outside the district.
5.13.1 Set up: Send SMS "speed+password+space+080"to the unit (suppose the speed is
80km/h), and it will reply "speed ok!". When the target moves exceeding 80 km/h, the unit
will send SMS "speed+080!+Geo-info" to the authorized numbers. It will alarm one time in
each setting.
5.13.2 Cancel: Send SMS nospeed+password to deactivate the over speed alert
Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers
every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS
"help me !+ Geo-info" to the tracker.
If cut power,the unit will send SMS alert. SMS format: " Cut power Alert+Geo-info".
5.17 Set number in a online positioning platform Add the number on the online
positioning platform for tracking. Adding to the special platform, send SMS
"number+tracker number"to the tracker.
5.18.1 For sending GPS data to IP address:Set up: Send SMS "web + password"to device.if
set successfully, the device will reply SMS "setweb ok". After this, you can call the tracker.
The tracker will hang up the phone and report the GPS data to IP address.
And then, the device will send GPS data to your telephone by SMS.
In order to use GPRS function, the user needs to set IP, Port and APN ( access point name )
by sending SMS commands.
The IP address and port of Communication Protocol in the tracker can be modified and
transferred data to other platform. Send SMS "IP address+port number" to the unit. If
the tracker’s IP address and port should be modified to 19.147.23.100and 2332, send
SMS "ip 119.147.23.100port2332"to the tracker.
In order to send GPS data to IP address, you still must set mobile network Access Point
Name (APN). If you don’t know the APN, you can consult local network service
supplier. The format of set APN is "apn +password +space + APN". For example
you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN
ok. " .
In order to make the time as the same with the user country, please send SMS command
"zone123456 space time zone". For example, if user country time is GMT+8,then
send"zone123456 8"to the device. If user country time is GMT-6,then Send
"zone123456 -6"to device. The device will reply SMS "set time zone ok".
In order to see your website in each replying SMS ,For example you website is
www.webs***.com, then send "home123456 www.webs***.com" . Then it will reply "set
home ok" ,when you want to cancel it, just send "nohome123456",it will reply SMS
"cancel home ok".
6 Cautions
6.1 Make sure to read this manual carefully before using this product.
6.2 Please insert the SIM card before installing, and make sure the SIM card has no
password, otherwise the tracker will not work normally.
6.3 The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work
voltage.
6.4 Please make sure that all the cables of the tracker has been connected rightly, and then
connect the tracker to host power.
6.6 Keep the unit dries. Any liquid, i.e. rain, moisture, may destroy or damage the inside
circuitry.
6.7 Clear the unit with a piece of dry cloth. Don’t clean in chemicals or detergent.
Faults Solution
Start up Fail Check the battery and see if it is fully charged or correctly installed.