No Single Point of Failure
No Single Point of Failure
No Single Point of Failure
Twin Sine Innovation (TSI) builds AC power systems with no single point of failure, the best
performing on the market.
Thanks to these characteristics, a Twin Sine Innovation (TSI) based system will give you
lower operating expenses and a reduced carbon impact.
ECI
CE+T Power is proud to announce its brand new Enhanced Conversion Innovation (ECI)
technology.
ECI combines three high-efficiency energy converters and an energy buffer within a single
module, offering a vast range of power conversion configurations for critical systems with up
to 96% (ac/ac) and 94% (dc/ac & ac/dc) efficiency.
ECI is the latest evolutionary development from CE+T Power; for many years, we have been
the industry-leading supplier of power conversion and power backup technology, including
our Twin Sine Innovation (TSI) products.
Flexibility: ECI technology brings unprecedented efficiency, optimised availability and high
power density to any conceivable power conversion scenario. Users can set up each
conversion stage to work in either one or two directions, depending on the host product’s
intended use.
This means that each power port - ACIN, DCIN and ACOUT – can be configured in uni- or
bidirectional mode, for use in inverters, UPSs, multi-conversion platforms or any other
application as required.
Wide AC input 150 to 265 Short circuit peak 10xIn for 20 mS on ACin Pure sine output
Vac
3xIn on DC/AC for 20 mS Stabilized +/- 1%
Active power factor Fully
correction bidirectional
Fully bidirectional converter
converter 0 leading to 0%
0 mS transfer time to DC lagging
in case of AC input failure
DC
Efficiency: ECI delivers 94% isolated DC/AC conversion efficiency – the best on the
market. It also provides 96% AC/AC conversion efficiency, with a unity input power factor.
Availability and redundancy: ECI, like TSI, eliminates the static switch and also any
single point of failure. Up to 32 modules can be paralleled on a single bus, allowing highly
granular redundancy. Hot swappability minimises repair time, further improving availability.
Lifetime cost-effective solution: ECI’s incremental modularity means you can size your
power protection according to your load, and scale it as it grows – no wasted capital or
space. Operating costs are minimised too, due to ECI’s electrical efficiency and zero
maintenance requirements.