Mobility 19 20

MOBILITY SELECTION 2019 / EN
NEW
WT 1056 11 WK 1072 L 1110 WMW-S-03
TOOL TOOL BAG TOOL ASSORTMENT
RUCKSACK for WORKMO® W3,
PROFI 110 pieces
gedore.com
MOBILITY
GEDORE @WORK
IDEALLY EQUIPPED FOR
STORAGE AND ACCESSORIES
THERE ARE LOTS OF

GREAT TRANSPORTATION
SOLUTIONS
from the company to the place of work. WORKMO®
and the Mixx&Click system are GEDORE’s modular,
mobile tool storage systems. Where to do with all
the tools when you are on a ladder, on a top-floor
gable, in the pit or under the hydraulic lift?
That’s when you need a central, mobile tray or store
for tools and incidentals!
Hands free for working, holding on or securing things

and yet with the tool you need always to hand -
no problem as long as you have the right storage
system and accessories.
Available in the GEDORE @work range are not

only tool cases and belts with a host of optional
bags, holsters and hooks but also rucksacks and
tool vests. Tools are securely kept in them and
are always to hand when needed.
002
003
ALL @WORK
PRODUCTS
ensure no freedom-of-movement restrictions,
tool weight optimum distribution and every bag
holding what it is meant to hold. Thus the material
is particularly rugged, long-lasting, easy to clean
and with the capacity to take up considerable loads.
All made possible thanks to a smart mix of leather
and synthetics and reinforced base inserts.
As such, even large, heavy bags remain stable
with no wearing through of the bottom or sides.
All bags are finished in double-stitch safety seams.
Attached holders and bag covers are even
reinforced, in part, with safety rivets. Nothing
gets lost thanks to absolutely secure fasteners.
Tools and incidentals, such as bits and screws,
remain in place.
And the best thing is that all bags, holsters

and belts of the @work series are combinable.
Besides the extended functions, diversity and
appearance have undergone changes. Along with
the new bags and scope for individualisation,
the tried-and-tested @work products have
also been redesigned.
1 Practical 2 Rugged
››Tools always to hand ››Low-on-wear leather and synthetic mix for durability
››Optimum, clear compartment arrangement ››Safety rivets and seams for extreme robustness
››Sufficient storage space ››Low intrinsic weight and high load-carrying capacity
››Stability even with heavy contents
››Easy to clean:
3 Safe 4 Individual
››Optimum weight distribution ››Combinable with other @work products
››Unlimited freedom of movement ››Available empty or with a range of tools
››Hands free for securing and working ››Extendable at any time
››Secure fasteners ››Adjustable belt and fastener sizes
MOBILITY
WT 1056 1
HEAVY-DUTY BELT
with cushioning
››Fits waist size from 80-120 cm
››Strongly cushioned for maximum comfort
››Made from leather
L W max. load capacity kg Code No. 0

1330 145 12 1802410 WT 1056 1 0.446
WT 1056 2
UNIVERSAL POUCH
››Leather pocket for knives
››Hammer holder with metal hooks
››Hook for tape measure
W H max. load capacity kg Code No. 0

290 290 5 1811096 WT 1056 2 0.434
WT 1056 2-001
TOOL SET @WORK
4 pieces
››Practical set for dry walling and renovation,
new construction and conversion work
››Tools carried around securely, efficiently
and always to hand
Contents pieces Code No.

Universal pouch No. WT 1056 2, Carpenter's hammer No. 75 ST, 600 g, 4 3100545 WT 1056 2-001
Steel tape measure No. 4534-3, tape L. 3 m, Pocket knife No. 0059-10, blades L. 100 mm
WT 1056 3
DRILL HOLSTER
››Suitable for drill-machines and battery-drills
››With pockets for screws and bits
››Securing loop to prevent loss

210 320 4 1818147 WT 1056 3 0.184
WT 1056 4
HAMMER HOLDER
with metal hooks
››Holds any claw hammer at a comfortable angle
››Enables boundless freedom of movement
››Polyester
››Stainless tab

100 160 3 1818155 WT 1056 4 0.118
004
005
WT 1056 4-001
TOOL SET @WORK
2 pieces
››Ideal for the building trade and especially for formwork
››Carpenter’s hammer carried around securely, efficiently and always at hand

Hammer holder with metal hooks No. WT 1056 4, Carpenter's hammer No. 75 ST, 600 g 2 3100561 WT 1056 4-001
WT 1056 5
THREE-POUCH BELT SET
››4 holsters, 5 storage pockets and 1 eyelet for tape measure

690 270 10 1818163 WT 1056 5 0.830
WT 1056 5-001
TOOL SET @WORK
6 pieces
››Practical set for boarding work
››Tools carried around securely, efficiently and always to hand

Three-pouch belt set No. WT 1056 5 6 3100588 WT 1056 5-001
Steel tape measure No. 4534-3, tape L. 3 m
Pocket knife No. 0059-10, blades L. 100 mm
Carpenter's hammer No. 75 ST, 600 g
Wrecking bar No. 120-350, 350 mm
Pincer No. 8381-225 TL, 225 mm
WT 1056 6
ELECTRICIANS' POUCH
››Generous pouch space
››Pockets for screwdrivers
››Extra pocket for insulation stripping knife
››Holding shackle for insulating tape

240 320 3 1818171 WT 1056 6 0.424
MOBILITY
WT 1056 6-001
TOOL SET @WORK
15 pieces
››Electrical wiring and repairs made easy
››Carrying around done securely, efficiently
and everything always to hand

WT 1056 6, Electricians' pouch 15 3100596 WT 1056 6-001
? VDE Screwdriver slotted No. VDE 2172, 3.5 5.5 mm, SLIM,
; VDE Screwdriver cross-slotted No. VDE 2162 PH 1 2, SLIM,
;?VDE Screwdriver cross-slotted No. VDE 2164 SL/PH 2 SLIM,
? Voltage tester slotted No. VDE 4616,12-1000 V, 3 mm,
VDE Stripping pliers No. VDE 8098-160 H, 160 mm, 2C handle, VDE Power side cutter No. VDE 8314-160 H, 160 mm,
VDE Multiple pliers No. VDE 8131 AB-200 H, 200 mm, VDE Cable shears No. VDE 8094, 200 mm,
VDE Cable knife No. VDE 4522, 180 mm, Multi-use cable knife No. 4529, blade L. 145 mm,
Insulating tape No. 4629, 10 m, Multi-fitting key ELECTRO No. 45 E
WT 1056 7
HEAVY-DUTY BELT SET
››Heavily padded belt for superior comfort when fully loaded
››Leather basic belt
››All inclusive: Holster, hammer holder,
2 pockets and mobile phone holder -
available separately No. WT 1056 7-1
Description y max. load capacity kg Code No. 0

Heavy-duty belt set 1330 12 1818198 WT 1056 7 1.106
Mobile phone holder – 1963171 WT 1056 7-1 0.052
WT 1056 8
DUO POUCH
››Leather pocket for knives
››2 large storage pockets

240 280 3 1818201 WT 1056 8 0.348
006
007
WT 1056 9
TOOL-ROLL
››12 inside pockets for slim tools,
e.g. combination spanners or screwdrivers
››Tools not supplied

320 350 2 1818228 WT 1056 9 0.260
WT 1056 9-001
TOOL SET @WORK
13 pieces
››Combination spanner in classic tool rool
››Easy to carry around, space-saving storage
››Tools clearly spread out and ready-for-use

Wallet No. WT 1056 9 13 3100634 WT 1056 9-001
Combination spanner set No. 7-0112, AF 6 7 8 9 10 11 12 13 14 15 17 19 mm
WT 1056 9-003
TOOL SET @WORK
10 pieces
››Basic tool set in classic tool roll
››Ideal for minor repairs in the home
››Easy to carry around, space-saving storage
››Tools clearly spread out and ready-for-use

Universal pliers No. 142 10 TL, 10", Power combination pliers No. 8250-180 TL,180 mm, 10 3100650 WT 1056 9-003
Power side cutter No. 8316-160 TL, 160 mm, ? 3C screwdriver slotted No. 2150, 4 5.5 6.5 8 mm,
; 3C screwdriver cross-slotted No. 2160SK PH 1 2, Wallet No. WT 1056 9
S 7 R-04
COMBINATION RATCHET SPANNER SET
4 pieces
››Most popular sizes as a set
››Flat pattern
››UD profile
››High torque transfer
››Working angle: 7° from 10 to 13 mm, 6° from 17 to 19 mm
››For ratchet loosening and fast tightening
››In practical bag
3
Contents pieces Code No. 0
3 7 R 10 13 17 19 4 2303949 S 7 R-04 0.680
MOBILITY
WT 1056 11
TOOL RUCKSACK PROFI
empty
››With extra large storage space
››Tools not included
W H D max. load capacity kg Code No. 0

300 400 120 15 1818244 WT 1056 11 2.696
WT 1056 12
TOOL RUCKSACK SOFT
››SOFT rucksack, extremely light and yet strong
››Extremely comfortable to carry
››Strong industrial seams
››Non-tearing polyester fabric
W H D max. load capacity kg Code No. 0

380 410 70 12 1818252 WT 1056 12 1.600
WT 1056 13
TOOL VEST
››Universal size with 4 lateral buckles
››Tear-resistant polyester fabric and suede

480 660 5 1818260 WT 1056 13 0.818
TC 1500 CT1 L
TEXTILE CASE
empty, for 1500 CT1 modules
››Robust textile bag with a strong Velcro fastening and handle
››Textile bag compatible with GEDORE module system 1500 CT
››Of splash-proof canvass
W D H Code No.
337 185 60 3100693 TC 1500 CT1 L
008
009
TC 666-MU-20
BIT BOX WITH RATCHET 1/4"
IN TEXTILE CASE
35 pieces
››Ultra thin-walled 1/4" socket sets
››Suitable for mechanical and hand-operated use
››Ensure your tools are always to hand in our water- and dirt-resistant bags
››Non-slip tool storage
››GEDORE Check-Tool system
Ratchet Sockets Accessories pieces Code No. 0

GEDORE ratchet 1/4" 2093 U-20 1/4" impact socket 4.5 5 5.5 6 7 8 9 10 11 12 13 mm Universal extension 1/4" 50 mm 35 3085015 TC 666-MU-20 0.593
1/4" screwdriver bit hex, 4 5 6 8 mm Bit adapter 1/4" square - 1/4" hexagon
1/4" screwdriver bit TX, T10 T15 T20 T25 T27 T30 T40 Adaptor 1/4" outer hex - 1/4" outer square
1/4" screwdriver bit cross-head PH1 PH2 PH3
1/4" screwdriver bit cross-head PZ1 PZ2 PZ3
1/4" screwdriver bit slotted, 4.5 5.5 6.5 mm
TC 19-20-MU-10
SOCKET SET 1/4"-1/2"
IN TEXTILE CASE
52 pieces
››Tools in metric sizes
››With robust reversible ratchet with push-button release
››Foam module compatible with GEDORE tool trolley
››Ensure your tools are always to hand in our water- and dirt-resistant bags
››Non-slip tool storage
Ratchet Sockets Accessories pieces Code No. 0

d $ 1993 U-10 T T C19 10 12 13 15 16 17 18 19 Universal extension 1/2" 52 3085031 TC 19-20-MU-10 3.3
# 2093 U-3 T 22 24 27 30 32 no. 1990 KR-10
R 3 D 20 4 5 6 7 8 9 10 11 12 13 R ' 2090-4
i ? 680 4 5.5 6.5 7 620
i 5 685 3 4 5 6 - 676
i . 685 X 5 6 8 699
i 7 687 TX T10 T15 T20 T25 T27 T30 T40
i ; 690 1 2
i < 690 PZD 1 2 3
MOBILITY
TC 19-MU-10
SOCKET SET 1/2"
IN TEXTILE CASE
16 pieces
››With robust reversible ratchet with push-button release
››Textile bag compatible with GEDORE module system 1500 CT
››Foam module compatible with GEDORE tool trolley
Sockets Ratchet Accessories pieces Code No. 0

T C19 10 12 13 15 16 17 18 19 22 24 27 30 32 $ 1993 U-10 T T ' 1990 KR-5 16 3085023 TC 19-MU-10 2.8
T ' 1990 -10
WK 1041 L
GEDORE TOOL CASE LARGE
empty
››Sturdy aluminium frame with edge protectors, trays made of impact-resistant ABS plastic
››When open, the case lid is prevented from locking unintentionally by the safety lid holder snapping into place
››A4 document compartment in the lid
››Variably divisible bottom tray
››Lockable with two-tilt cylinder locks and a combination lock
››Removable tool panel with 22 tool pockets at the front and back in the lid
››Removable cover for bottom tray with 15 tool pockets
W D H Code No. 0
490 395 185 3065405 WK 1041 L 4.9
1041-001
BASIC TOOL SET IN CASE
74 pieces
››Basic set for all trades
››Practical assortment for on-site use
››Packed in a strong plastic case made from impact-proof ABS
››Robust aluminium frame
››Robust companion – whenever the right tools
have always to be on hand
010
011
Contents W D H pieces Code No. 0

Combination spanner no. 7, 10 13 17 19 22 mm 490 395 185 74 3082121 1041-001 10.6
Bit socket wrench no. 666-U-20, with ratchet 1/4" 35 pcs
Hexagon socket key no. 42, 2 2.5 3 4 5 6 8 10 mm, in holder
Adjustable wrench, open end no. 60 P 8
? 3C screwdriver slotted no. 2150, 3 4 5.5 6.5 8 mm
; 3C screwdriver cross-slotted no. 2160, PH 0 1 2
Recoilless and engineer's hammer KOMBI-PLUS R no. 247 H-30, head D.30 mm
Pocket measuring callipers no. 710
Steel tape measure no. 4534-3, tape L. 3 m
? Voltage tester slotted no. 4615 3, 220-250 V, 3mm
Stripping pliers no. 8098-160 JC, 160 mm 2C handle
Multiple pliers no. 8133-200 JC, 200 mm 2C handle
Power combination pliers no. 8250-180 JC, 180 mm 2C handle
Power side cutter no. 8316-160 JC, 160 mm 2C handle
Universal pliers no. 142 10 JC, 10"
Striking tools set no. 106, 6 pcs
Cable knife no. 0513-09, blades L.90 mm
Wire brush no. 644, triple row
+ Volume tool bag WK 1041 L
1041-002
PROFI TOOL SET IN CASE
100 pieces
››Professional set for all trades
have always to be at hand

Combination spanner No. 1 B, AF 8 10 13 17 19 22 mm 490 395 185 100 3082148 1041-002 12.9
1/2" socket No. 19, AF 8 10 13 17 19 22 mm
1/2" extension No. 1990-5
1/2" reversible ratchet No. 1993 U-20
Spring steel socket rail for 14 sockets 1/2" VH 19
1/4" Bit socket wrench box No. 666-U-20, with ratchet 35 pcs
Hexagon socket key set No. H 42-10, in holder 10 pcs
Hexagon socket key set TX No. H 43 TX-88, in holder 8 pcs
Adjustable wrench, open end No. 60 P 8, 8"
Striking tools set No. 106, 6 pcs
Grip wrench No. 137 10 10
Square bladed awl No. 156 S
Recoilless and engineer's hammer KOMBI-PLUS R No. 247 H-30
Hobby saw No. 406
Cable knife No. 0513-09
Spark plug brush No. 647
Pocket measuring callipers No. 710
? 3C screwdriver slotted No. 2150, 3 4 5.5 6.5 8 mm
; 3C screwdriver cross-slotted No. 2160, PH 0 1 2
; 3C screwdriver cross-slotted No. 2160, PZ 1 2
Steel tape measure No. 4534-3, tape L. 3 m
? Voltage tester slotted No. 4615 3, 220-250 V, 3mm
Small universal scissors No. 8096-140
Stripping pliers No. 8098-160 JC, 160 mm 2C handle
Multiple pliers No. 8133-200 JC, 200 mm 2C handle
Combination pliers 8245-180 JC, 180 mm 2C handle
Power side cutter No. 8316-160 JC, 160 mm 2C handle
Universal pliers No. 142 10 TL, 10"
+ Tool case large No. WK 1041 L
MOBILITY
1041-003
VDE TOOL SET IN CASE
74 pieces
››VDE basic range
have always to be at hand

Combination spanner No. 7, AF 10 13 17 19 22 mm, 490 395 185 74 3082156 1041-003 10.3
1/4" Bit socket wrench box No. 666-U-20, with ratchet 35 pcs,
Hexagon socket key set No. PH 42-88, AF 2 2,5 3 4 5 6 8 10 mm,
Adjustable wrench, open end No. 60 P 8, 8",
? VDE Screwdriver slotted No. VDE 2170, 3 3.5 4 5.5 6.5 8 mm,
; VDE Screwdriver cross-slotted No. 2160 PH 0 1 2,
Recoilless and engineer's hammer KOMBI-PLUS R 247 H-30,
VDE Cable knife No. VDE 4522, 180 mm, Steel tape measure No. 4534-3, tape L. 3 m,
? Voltage tester slotted No. 4615 3, 220-250 V, 3mm,
VDE stripping pliers VDE 8098-160 H, VDE Multiple pliers No. VDE 8131 AB-200 H,
VDE Power combination pliers No. VDE 8250-180 H,
VDE Power side cutter No. VDE 8316-180 H, VDE Universal pliers No. VDE 146 10, 10",
Striking tools set No. 106, 6 pcs, Cable knife No. 0513-09, blades L.90mm
+ Volume tool bag WK 1041 L
WK 1040 L
GEDORE ROLLER TOOL CASE
empty
››Handle with user-friendly telescopic grip
››Widely spaced wheels with two inline castors for pulling without tipping
››Sturdy aluminium frame with edge protectors, trays made of impact-resistant ABS plastic
››A4 document compartment in lid and bottom tray with dividers
››Lockable with two-tilt cylinder locks and a combination lock
››Removable tool panel with 22 tool pockets at the front and back in the lid
››Removable cover for bottom tray with 15 tool pockets
W D H Code No. 0
490 395 240 3065391 WK 1040 L 6.2
WK 1072 L
TOOL BAG
empty
››With carrying and strap
››With plenty of compartments and additional elastic holders
››Plastic hard-shell bottom prevents moisture absorption from below
››Dimensionally stable
››26.2 l utilisable capacity
W D H Code No. 0
515 335 360 3100421 WK 1072 L 2.400
012
013
S 1072-001
TOOL BAG WITH TOOLS
29 pieces
››With carrying and strap
››With plenty of compartments and additional elastic holders
››Plastic hard shell bottom, no moisture absorption
››Dimensionally stable
››Starter package for any handyman

Combination spanner 10 13 14 17 19, 515 335 360 29 3100448 S 1072-001 5.9
Socket 10 13 14 17 19 mm,
Extension 125 mm, Reversible ratchet 1/2",
3C screwdriver slotted 5.5x1x100mm 8x1.2x150mm, 3C screwdriver PH 1 2,
Hexagon socket key 2 2.5 3 4 5 6 8 mm, Universal pliers 12" 17 settings,
Voltage tester 220-250 V, Tape measure L. 3m,
Power combination pliers L.180 mm, Flat chisel L.150 mm, Engineer's hammer 300 g
1000
TOOL CASE TOURING
49 pieces
››Universal GEDORE tool set, 49 pieces,
for highest requirements
››Neatly and clearly arranged tools - laid out in
foam cut out tool control system
››Space-saving and robust in tough plastic case,
resistant to oil
od!
Combination spanner No. 7, AF 6 7 8 10 11 12 13 14 15 17 19 mm 430 360 149 49 6600780 1000 7.0
1/2" socket hex No.19, AF 10 11 12 13 14 15 17 19 22 mm
Extension 1/2" No. 1990-5 -10, 125 250 mm
Universal joint 1/2” No. 1995, 73.5 mm
Reversible ratchet 1/2” No. 1993 U-20, 270 mm
Hexagon socket key set No. PH 42-88, 2-10 mm in holder 8 pcs
? 3C screwdriver slotted No. 2150, 4 5.5 6.5 mm
; 3C screwdriver cross-slotted No. 2160 PH 1 2
? Voltage tester 220-250 V, slotted No. 4615 3, 3 mm
Cable knife No. 0513-09, 195mm, Universal pliers No. 142 10 TL, 10"
Engineers' hammer ROTBAND-PLUS No. 600 H-300, 300 g
Striking tools set No. 106 6 pcs, in PVC holder No. 106
+ case WK 1000 L
MOBILITY
GEDORE WORKMO® –
THE MOBILE ORDERLY ARRANGEMENT,
TRANSPORT AND WORKING SYSTEM
Thanks to the modular and ergonomic design, the GEDORE WORKMO® system efficiently unites transport, orderliness and workplace. The box modules are
quickly and easily transformable into portable units. They, in turn, are lightweight, load-securing and crash-tested. The assembled box modules provide for
a dependable tool/working station. As such, WORKMO® is ideally adaptable to the needs of every operation and brings about maximum flexibility and
professional support on a daily basis. Optional castors also allow use as a mobile workstation. Equipping the WORKMO® drawers with pre-configured tool
sets in matching foam inserts and the scope of the GEDORE iMOD range for individualising tool module requirements round off the overall package.
Practically all requirements are thus covered.
The drawer sizes and module variants are shown on a joint basic grid. The raster determines the drawers (blue)
314 Basic grid which are individually combinable with the tool modules (coloured). Configuration examples are on the right.
660 mm
418 mm
FEATURES
1 Light:
››Low weight due to aluminium-plastic mix
››Ergonomic working heights 1
2 Individual:
››WORKMO® adapts exactly to the requirements of 2
your individual working day
››With the foam configurator the tool equipment
can be arranged individually
3
3 Compatible:
››with the Sortimo® L-BOXX® range
››with the GEDORE tool modules 1500 ES/1500 CT
4 Sturdy:
››Robust handling – lockable - durable
››Rounded plastic edges for impact and scratch protection
4
5 Drawer equipment:
››Ideal for fitting out with WORKMO® modules complete with GEDORE tools
››Modules for two drawer widths
6 Flexible:
5
››Expandable at any time (with castors, worktop etc.)
››For further system components see Sortimo®
6
Drawer W2 Drawer W3
014
015
Drawer sizes with the WORKMO® box module equipping grid
W2 W3
W 418 x D 314 mm 1110 WMW-2 W 660 x D 314 mm 1110 WMW-3
Module variants for fitting out individually
1/3 MODULE 2/3 MODULE

1500 ES-1/CT-1 1500 ES-2/CT-2
W 157,5 x D 310 mm W 315 x D 310 mm
CTB2 MODULE CTB3 MODULE

1110 1110
W 417 x D 314 mm W 660 x D 314 mm
Configuration example
2/3 MODULE 1/3 MODULE 1/3 MODULE B3

1500 ES-2/CT-2 1500 ES-1/CT-1 1500 ES-1/CT-1 DRAWER
GEDORE INDIVIDUAL
"I-MODULES"
You haven't found the right tool modules for yourself?
Why not create your perfection in tool orderliness in line with corporate design requests and your process specifications - We look forward to hearing from you!
MOBILITY
1110 WMW-2
TOOL TROLLEY WORKMO W2
››Modular tool trolley
››Ideal for transportation from the workshop to changing workplaces
››6 drawers fully extendable suited for GEDORE 1500 ES/1500 CT modules
››One compartment with locking device for GEDORE L-BOXX® 136 no. 1100 L (not included)
››Compatible with Sortimo® interior vehicle fittings and load safety
››Dimensions: W 526 x D 396 x H 1172 mm
››Weight benefit (up to 50 % lighter than comparable solutions!)
W D H Code No. 0
526 396 1172 2954435 1110 WMW-2 42.6
WORKMO® W2
AS SET WITH ASSORTMENT
1110 WMW-S-02
TOOL ASSORTMENT FOR WORKMO W2
72 pieces
››Ideal for major and minor maintenance and assembly work
››For industry, the trades, automotive and the ambitious do-it-yourselves
››The right GEDORE assortment, as required, for trainees,
apprentices and do-it-yourselves
1110 WMW-2 1100 L 1110 CTB2-01 1110 CTB2-02

Workshop trolley No. 1110 WMW-2 526 396 1172 4 3005186 1110 WMW-S-02 50.5
GEDORE L-BOXX® 136 No. 1100 L
Tool assortment No.l 1110 CTB2-01
016
017
1110 CTB2-01
TOOL ASSORTMENT
in CT module for W2, 22 pieces
››Composition of GEDORE tool assortment based on daily workshop routines
››CTB2 modules fit into the WORKMO® tool trolley drawers
and the L-BOXX® 136 tool box

Combination spanner No. 7, AF 10 12 13 14 15 16 17 18 19 22 24 27 mm 417 314 35 22 3005224 1110 CTB2-01 3.4
Engineers' hammer No. 4 E-500, 500 g
Centre punch No. 100-12, 120x12x5 mm
Pin punch No. 119-4 -5 -6 -8, Ø 5 6 8 mm
Flat chisel No. 97-250, 250 mm
Cross-cut chisel No. 98-125, 125 mm
Drift punch No. 99 12-5 12-8, Ø 5 8 mm
1110 CTB2-02
TOOL ASSORTMENT
››Impact cap screwdriver, positive-fit joint of handle and blade
for an optimum transmission of force
and the L-BOXX® 136 tool box

? 3C screwdriver slotted No. 2154SK 3.5 5.5 6.5 8 mm 417 314 35 49 3005232 1110 CTB2-02 2.2
; 3C screwdriver cross-slotted No. 2160SK PH 1 2
Hexagon socket key set No. PH 42-88, 6kt SW 2 2,5 3 4 5 6 8 10 mm
1/4" Bit box No. 666-032-A, 32 pcs
1110 WM 24
TOOL BOX MODULE WORKMO W2
4 drawers H6
››Lightweight and stable aluminium/plastic mix
››Crash tested
››Load capacity per drawer 30 kg
››Dimensions: B 526 x D 396 x H 506 mm
››Drawer size inside B 418 x D 314 x H 89 mm
W D H Code No. 0
526 396 506 2954311 1110 WM 24 21.9
MOBILITY
1110 WM 221
2 drawers H6, compartment for L-BOXX®
››A lock-fitted compartment for GEDORE L-BOXX® 136 No. 1100 L (not included in the scope of delivery)
››Crash tested
››Dimensions: B 526 x D 396 x H 506 mm
W D H Code No. 0
526 396 506 2954338 1110 WM 221 15.3
1110 WMHP 2
WOOD PLATE
for WorkMo W2
››20 mm thick multiplex beech wood worktop
››Add to WorkMo boxes W2 to get an additional work surface
W D H Code No. 0
571 426 20 2954362 1110 WMHP 2 4.5
1110 WMR 24
ROLLER
for WorkMo W2
››A coupler lever connects the roller to the WorkMo boxes
››Extra lashing points make for safe transfers of another load as well
››Loading capacity: 200 kg
W D H Code No. 0
612 493 144 3002721 1110 WMR 24 8.0
018
019
1110 WMW-3
TOOL TROLLEY WORKMO W3
››Ideal for transportation from the workshop to changing workplaces
››6 drawers fully extendable suited for GEDORE 1500 ES/1500 check tool modules
››1 compartment with locking device for GEDORE L-BOXX® 136 no. 1100 L and GEDORE S-BOXX®
no. 1110 WMSB 3 (both not included)
››Dimensions: W 789 x D 396 x H 1172 mm
››Weight benefit (up to 50 % lighter than comparable solutions!)
W D H Code No. 0
789 396 1172 2954443 1110 WMW-3 52.8
WORKMO® W3
AS SET WITH ASSORTMENT
1110 WMW-S-03
TOOL ASSORTMENT FOR WORKMO W3
110 pieces
››Ideal for major and minor maintenance and assembly work
››The right GEDORE assortment, as required, for trainees, apprentices and do-it-yourselves
1100 L 1100 CTB3-01 1100 CTB3-02

Workshop trolley No. 1110 WMW-3 789 396 1172 110 3005194 1110 WMW-S-03 64.3
GEDORE L-BOXX® 136 No. 1100 L
S-BOXX® B3 No. 1110 WMSB 3
Tool assortment No. 1110 CTB3-01
MOBILITY
1110 CTB3-01
TOOL ASSORTMENT

Combination spanner No. 7, AF 10 12 13 14 15 16 17 18 19 22 24 27 mm 660 314 35 43 3005240 1110 CTB3-01 6.1
Engineers' hammer No. 4 E-500, 500 g
Centre punch No. 100-12, 120x12x5 mm
Pin punch No. 119-4 -5 -6 -8, Ø 4 5 6 8 mm
Flat chisel No. 97-250, 250x24 mm
Cross-cut chisel No. 98-125, 125x10x5 mm
Drift punch No. 99 12-5 12-8, Ø 120x12x5 mm
1/2" socket No. 19, AF 8 9 10 11 12 13 14 15 16 17 18 19 20 22
24 27 30 32 mm
1/2"universal extension No. 1990 KR-5 -7, 125 180 mm
1110 CTB3-02
TOOL ASSORTMENT
››Impact cap screwdriver, positive-fit joint of handle and blade for an
optimum transmission of force

? 3C screwdriver slotted No. 2154SK 3.5 5.5 6.5 8 mm 660 314 35 65 3005267 1110 CTB3-02 2.8
Hexagon socket key set No. PH 42-88, 6kt SW 2 2,5 3 4 5 6 8 10 mm
Multiple pliers No. 8133-200 JC, 200 mm
Power side cutter No. 8316-180 JC, 180 mm
1/4" Bit box No. 666-032-A, 32 pcs
Bit adapter No. 620,1/4" hex x 1/4" square
1/4" multi-handle No. 676
1/4" bit holder No. 699, hex
1/4" socket No. D 20, AF 4 5 5,5 6 7 8 9 10 11 12 13 MM
1/4"universal extension No. 2090 KR-4, 97 mm
020
021
1110 WM 34
4 drawers H6
››Crash tested
W D H Code No. 0
789 396 506 2954346 1110 WM 34 27.9
1110 WM 321
2 drawers H6, compartment for L-BOXX® + S-BOXX®
››A lock-fitted compartment for GEDORE L-BOXX® 136 No. 1100 L and for GEDORE S-BOXX®
No. 1110 WMSB 3 (none of the two included in the scope of delivery)
››Crash tested
W D H Code No. 0
789 396 506 2954354 1110 WM 321 22.1
1110 WMHP 3
WOOD PLATE
for WorkMo W3
››20 mm thick multiplex beech wood worktop
››Add to WorkMo boxes W3 to get an additional work surface
W D H Code No. 0
834 426 20 2954370 1110 WMHP 3 4.5
1110 WMR 34
ROLLER
for WorkMo W3
››A coupler lever connects the roller to the WorkMo boxes
››Extra lashing points make for safe transfers of another load as well
››Loading capacity: 200 kg
W D H Code No. 0
854 493 144 3002713 1110 WMR 34 9.0
MOBILITY
1110 WMS 23
LOCKING SYSTEM
for WorkMo W2+W3
››Protects drawers and BOXX®es against extraction
››Secures the tools against unauthorised access
Code No. 0
2954389 1110 WMS 23 0.920
1110 WMR 23
ROLLER SKIDS, PAIR
for WorkMo W2+W3
››Makes the tool box modules mobile
››4 swivel castors, 2 with total brake
››Max. load capacity: 150 kg (per roller skid 75 kg)
Wheel diameter Code No. 0

100 2954397 1110 WMR 23 3.2
1110 WMT 23
DIVIDER SET
for WorkMo drawers W2+W3
››To divide the drawers
››3 lengthwise dividers and mounting brackets
W H Code No. 0
311 62 2954419 1110 WMT 23 0.270
1110 WMSB 3
S-BOXX® W3
with window
››Viewing window for a quick visual check of the contents
››Ideal for the storage of expendables, such as screws etc.
››Load capacity 12 kg
W D H Code No. 0
147 351 153 2954427 1110 WMSB 3 0.680
022
023
THE GEDORE
MIXX&CLICK KIT
The Sortimo transport box system is perfect for mobile deployment requirements. The MIXX&CLICK kit is based on the proven GEDORE L-BOXX® 136
with front grips and tool board in the lid and the GEDORE i-BOXX® 72. These are multiply compatible and therefore extremely flexible. A high degree of individualisation
is realizable. Thus, the MIXX&CLICK system features, in particular, a wide scope for combinations as a result of the pre-configured GEDORE tool ranges. Even modules
from other manufacturers, such as Bosch electrical instruments, can be used. Together with other components from the Sortimo® range of tools
(transport boxes and system components) a well-organized “to go” workshop is built up to match your personal requirements.
FEATURES 1
Tool board
››for re-equipping or customizing
the L-BOXX® depending on the
work involved
Tool modules
2 ››for equipping the L-BOXX® with
1/2 and 2/2 modules
i-BOXX® RACK-ACTIVE click system

3 ››ensures your i-BOXX® tool assortments
are securely transported. It is compatible
with all L-BOXX®es
L-BOXX® roller
4 ››Fit and click to attach roller and BOXX®
MOBILITY
The heart of the kit - GEDORE L-BOXX® 136

with front grip powered by Sortimo® - features:
››Strong construction
››Easy and convenient transfer of tools to where they are needed
››Impact-resistant ABS plastic
››Standard lid handle to carry the L-BOXX® horizontally
››Additional kind-to-hands front grip to carry the L-BOXX® vertically
››Splash-proof
››GEDORE tool board for a clearer arrangement and more storage space
››Easy-click system: Practical plug connection for two or more L-BOXX®es, for a secure grip and easy transport
››No-problem integration in vehicles with the TÜV-tested Sortimo® vehicle fittings
2 STRONG PARTNERS – 1 SYSTEM

MOBILITY IN PERFECTION
››Tools, machines and material must be easily, safely, quickly and conveniently transported
to the place of use i.e. in a preferably resources-saving manner.
››Lengthy loading times must be avoided at all costs - guaranteed load securing is a pre-condition here!
››GEDORE's Sortimo® transport box system relies on a tried-and-tested mobility standard.
››The perfect alliance for intelligent, efficient process and project design planning.
Your advantage For your safety

››Intelligent order systems ››The GEDORE L-BOXX®es are fully compatible with
››Flexible, modular and individual Sortimo® vehicle fittings.
››Ideal for mobile deployments ››GEDORE L-BOXX® quality is constantly examined on the basis
››Diverse and highly efficient of the strict Sortimo® directives. Sortimo® has its quality
››Quick accessing of tools - perfect organisation endorsed through crash tests organized by the TÜV.
››Transport box standard - e.g. compatible with electrical tool manufacturers ››If it comes to the worst, then the tools stay where they belong -
››Guaranteed safety securely in their GEDORE L-BOXX®
024
025
1100-004
STARTER TOOL ASSORTMENT
in GEDORE L-BOXX® 136, 30 pieces
››Robust reversible ratchet with push-button release
››GEDORE L-BOXX® 136 with an easy click attaching system
Contents pieces Code No. 0

Combination spanner No. 1 B, AF 8 10 13 16 17 18 30 3085287 1100-004 8.4
19 22 24 mm
1/2" socket No. C19, AF 10 12 13 16 17 18 19 22 24 27 mm
1/2" extension No. 1990, 125 mm
1/2" reversible ratchet No. 1993 U-10 T
? Voltage tester slotted 4615, 3 mm
1100-BASIC
STARTER TOOL ASSORTMENT
››Basic set for all trades
Description Contents pieces Code No. 0

Starter assortment in Combination spanner No. 7, AF 10 12 13 14 15 16 17 18 19mm 23 2835983 1100-BASIC 6.1
L-BOXX 136, 23 pcs Universal cable knife No. 4528, blade L. 50 mm
Wood sectioned folding ruler No. 4533-2. 2 m
Hobby saw No.406, blade L. 145 mm
Flat chisel No. 95-200, 200x23x13 mm
Engineers' hammer No. 600 H-500, 500 g
+ GEDORE L-BOXX® 136 No. 1100 L
Starter assortment in Combination ratchet spanner No. 7 R, AF 10 12 13 14 15 16 17 18 19 mm 14 2835967 1100 CT2- 2.4
2/2 L-BOXX 136 module Universal cable knife No. 4528, blade L. 50 mm BASIC
Hobby saw No.406, blade L. 145 mm
Flat chisel No. 95-200, 200x23x13 mm
MOBILITY
1100-01
MECHANIC TOOL ASSORTMENT
››Suitable for tradesmen
››Check-Tool insert for quick check of completeness
Description Contents pieces Code No. 0

GEDORE L-BOXX 136 with 1/2" reversible ratchet No. 1993 U-20 58 2658194 1100-01 9.5
assortment Mechanic, 1/2" extension No. 1990-10, 250 mm
58 pcs 1/2" universal joint No. 1995
1/2" socket No. 19, AF 10 11 12 13 14 15 16 17 18 19 21 22 24 mm
Adjustable wrench, open end No. 60 CP 8, 8"
Universal pliers No. 142 10 JC, 10" 2C handle
Bricklayer's chisel No. 110-256, 250x16 mm
Multi fitting key UNIVERSAL No. 45 S,
for control cabinets and locking devices
Miniature LED lamp No. TFK 649
Swivel end No. E-649 F for LED lamp No. TFK 649
Cable knife No. 0063-08, blades L. 80 mm
Hexagon socket key set No. H 42-10, hex 1.3 1.5 2 2.5 3 4 5 6 8 10 mm
Hexagon socket key No. SCL 43 TX-80, T9 T10 T15 T20 T25 T30 T40
?; VDE Screwdriver set No. VDE 2170-2160 PH-077 slotted 2.5 4 5.5,
cross-slotted PH 0 1 2
Key file set No. 8728, flat, three-edged, square, half-round, round file
Assortment Mechanic, in 1/2" reversible ratchet No. 1993 U-20 26 2936828 1100 CT2-01 6.8
2/2 L-BOXX 136 Module, 1/2" extension No. 1990-10, 250 mm
26 pcs 1/2" universal joint No. 1995
1/2" socket No. 19, AF 10 11 12 13 14 15 16 17 18 19 21 22 24 mm
Adjustable wrench, open end No. 60 CP 8, 8"
Universal pliers No. 142 10 JC, 10"
Multi fitting key UNIVERSAL No. 45 S,
for control cabinets and locking devices
Miniature LED lamp No. TFK 649
Swivel end No. E-649 F for LED lamp No. TFK 649
Cable knife No. 0063-08, blades L. 80 mm
026
027
1100 CT1-7
COMBINATION SPANNER SET
in 1/2 L-BOXX® 136 Module, 12 pieces
3
Combination spanner No. 7, AF 8 10 12 13 14 15 16 17 18 19 22 24 mm 312 200 60 12 2835908 1100 CT1-7 1.500
1100 CT1-19
SOCKET SET 1/2"
od
1/2" socket No. 19, AF 8 9 10 11 12 13 14 15 16 17 18 19 21 312 200 60 21 2836009 1100 CT1-19 2.800
22 24 27 30 32 mm
1100 CT1-20
SOCKET SET 1/4"
››For universal use with sockets and bits
mb1ei?5;<7
1/4" socket No. 20, AF 4 5 5.5 6 7 8 9 10 11 12 13 mm 312 200 60 44 2835886 1100 CT1-20 0.856
1/4" reversible ratchet 2093 U-20
1/4" extension No. 2090-4, 97 mm
1/4" bit holder No. 699, hex
Bit adapter No. 620, 1/4" hex x 1/4" square
1/4" multi-handle No. 676
?1/4" screwdriver bit slotted No.680, 4 4.5 5.5 6.5 8 mm
51/4" screwdriver bit hex No. 685, 3 4 5 6 8 10 mm
?1/4" screwdriver bit cross-slotted No.690, PH 1 2 3
<1/4" screwdriver bit cross-slotted No. 690, PZ 1 2 3
71/4" screwdriver bit TX No. 687, T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40
1100 CT1-350
CHISEL SET
››Club hammer ROTBAND-PLUS for powerful blows

Striking tools set No. 106, 6 pcs 312 200 60 9 2835932 1100 CT1-350 2.300
Electricians' chisel No. 112-2508, 250x8x6 mm
Club hammer No. 620 E-1000, 1000 g
MOBILITY
1101-7-7 R
COMBINATION SPANNER SET
in i-BOXX® 72, 15 pieces
››Often used spanner sizes as practical ratchet wrench
››In GEDORE i-BOXX® 72 No. 1101 L
››Compatible with GEDORE i-BOXX® Rack active No. 1101 K
3
Combination ratchet spanner No. 7 R, AF 10 13 17 19 mm 367 316 72 15 2836114 1101-7-7 R 2.900
Combination spanner No. 7, AF 6 8 11 12 14 15 16 18
21 22 24 mm
1101-19
SOCKET SET 1/2"
od
1/2" socket No. 19, AF 8 9 10 11 12 13 14 15 16 17 367 316 72 21 2836084 1101-19 4.050
18 19 21 22 24 27 30 32 mm
1101-D 20
SOCKET SET 1/4"
››For universal use with sockets and bits
mb3ei5.?;<78
1/4" socket No. 20, AF 4 4.5 5 5.5 6 7 8 mm, 367 316 72 58 2836165 1101-D 20 2.000
1/4" reversible ratchet 2093 U-20, 1/4" extension No. 2090-2 -4, 55 97 mm,
1/4" universal joint No. 2095, Bit adapter No. 620, 1/4" hex x 1/4" square,
1/4" multi-handle No. 676, Adaptor No. 673 6.3, 1/4" hex x 1/4" square,
1/4" bit holder No. 699, hex,
?1/4" screwdriver bit slotted No.680, 4 5.5 6.5 8 mm,
51/4" screwdriver bit hex No. 685, 3 4 5 6 8 10 mm,
.1/4" screwdriver bit XZN No. 685 X, M5 M6 M8,
?1/4" screwdriver bit cross-slotted No.690, PH 1 2 3,
<1/4" screwdriver bit cross-slotted No. 690, PZ 1 2 3,
71/4" screwdriver bit TX No. 687, T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40,
71/4" screwdriver bit TX with hole No. 688 T10 T15 T20 T25 T27 T30 T40,
Inset box No. E-1101 BT, with two partitions
028
029
1101-142-2150
PLIERS/SCREWDRIVER
ASSORTMENT
?;TP
? 3C screwdriver slotted No. 2150, 4 5.5 6.5 mm 367 316 72 9 2836149 1101-142-2150 1.900
Multiple pliers No.8133-180 JC, 180 mm 2C handle
1100 W-001
TOOL BOARD WITH
PLIERS/SCREWDRIVER ASSORTMENT
9 pieces
››Fitted-out lid tool board for re-equipping L-BOXX®s
››A non-equipped lid tool board can be ordered under No. ET-1100 W
››Empty tool board for re-equipping on Page 46
?;TP 1100 W-001
Contents W H pieces Code No. 0

Multiple pliers No. 8133-180 JC, 180 mm 2C handle 37.5 31 9 2836181 1100 W-001 1.795
? Voltage tester slotted No. 4615, 3 mm
+ tool board No. ET-1100 W
Multiple pliers No. 8133-180 JC, 180 mm 2C handle 9 2836211 S 1100 W-001 1.100
? Voltage tester slotted No. 4615, 3 mm
MOBILITY
1100 W-002 VDE

TOOL BOARD WITH
VDE PLIERS/SCREWDRIVER ASSORTMENT
9 pieces
››Fitted-out lid tool board for re-equipping L-BOXX®s
››A non-equipped lid tool board can be ordered under No. ET-1100 W
››Empty tool board for re-equipping on Page 46
? ; < T P iO ö 1000 V 1100 W-002 VDE
Contents W H pieces Code No. 0

VDE Side cutter No. VDE 8314-160 H, 160 mm 37.5 31 9 2836203 1100 W-002 VDE 1.520
VDE Bent nose telephone pliers No. VDE 8132-160 H, 160 mm
?VDE Screwdriver slotted No. VDE 2170, 2.5 3.5 5.5 mm
;VDE Screwdriver cross-slotted No. VDE 2160 PH 1 2
<VDE Screwdriver cross-slotted No. VDE 2160 PZ 1 2
+ tool board No. ET-1100
VDE Side cutter No. VDE 8314-160 H, 160 mm 9 2836238 S 1100 W-002 VDE 0.800
VDE Bent nose telephone pliers No. VDE 8132-160 H, 160 mm
?VDE Screwdriver slotted No. VDE 2170, 2.5 3.5 5.5 mm
<VDE Screwdriver cross-slotted No. VDE 2160 PZ 1 2
1101-001
SET OF CIRCLIP PLIERS
››For internal and external circlip rings
››Straight and 90° angled tips
››Transparent cover for a quick overview
BAMN
Circlip pliers for external retaining rings No. A, straight and angled at 90° 367 316 72 8 1692275 1101-001 1.550
Circlip pliers for internal retaining rings No. J, straight and angled at 90°
030
031
1101-004
››Particularly suitable for barely accessible places
››Circlip pliers with straight and 45° angled tips
››For installation and removal of internal and external retaining rings up to a 60 mm size
››Transparent cover for a quick overview
BAM
1102-001
in L-BOXX® Mini, 4 pieces
››For internal and external circlip rings
››Straight and 90° angled tips
››Divider set included
››Ideal for keeping small parts
BAMN
1101-002
PLIERS SET
››Practical set composition in sturdy plastic case
Stripping pliers no. 8098-160 JC
››Self-opening, spring and locking screw for wires 0.8 - 6.0 mm2
Power combination pliers no. 8250-180 JC
››For toughest-possible continuous use. Considerable leverage for easy cutting
Power side cutter no. 8316-180 JC
››Good lever action for easy cutting, induction-hardened precision blades, hardness 63 - 65 HRC
Needle nose pliers no. 8132-160 JC
››Needle nose, long jaws, straight gripping faces, serrated for holding, gripping, bending and cutting
Needle nose pliers no. 8120-160 JC
››Long jaws, serrated gripping faces, for holding and bending work
Round nose pliers no. 8122-160 JC
››Long jaws, serrated gripping faces for bending work
››In GEDORE i-BOXX® 72 no. 1101 L
››Compatible with GEDORE i-BOXX® Rack active no. 1101 K

Stripping pliers no. 8098-160 JC, 160 mm 2C handle, Flat nose pliers no. 8120-160 JC, 160 mm 2C handle, 367 316 72 6 1708155 1101-002 1.740
Round nose pliers no. 8122-160 JC, 160 mm 2C handle, Bent nose pliers no. 8132-160 JC, 160 mm 2C handle,
Power combination pliers no. 8250-180 JC, 180 mm 2C handle,
Power side cutter no. 8316-180 JC, 180 mm 2C handle
MOBILITY
1102-003
PLIERS SET
Bent nose telephone pliers No. 8132-160 JC
››Long, flat-round jaws, straight gripping faces, serrated for holding, gripping, bending and cutting
Power combination pliers No. 8250-180 JC
››Considerable leverage for firm gripping and cutting
››For flat and round material
Power side cutter No. 8316-160 JC
››Good lever action for easy cutting

Bent nose telephone pliers No. 8132-160 JC, 160 mm 2C handle 260 155 63 3 1692305 1102-003 1.010
Power combination pliers No. 8250-180 JC, 180 mm 2C handle
1102-007
PLIERS SET
Bent nose telephone pliers No. 8132-200 JC
››Long, flat-round jaws, straight gripping faces, serrated
››For holding, gripping, bending and cutting
Power side cutter No. 8314-180 JC
››Slim head - ideal for confined spaces
Universal pliers No. 142 10 TL
››Offset gripping faces for self-gripping of nuts and pipes

Bent nose telephone pliers No. 8132-200 JC, 200 mm 2C handle 260 155 63 3 2951789 1102-007 1.195
1102-008
PLIERS SET
Universal pliers 142 7 TL
››Offset gripping faces for self-gripping of nuts and pipes
Power side cutter 8316-160 JC
››Good lever action for easy cutting
Multiple pliers 8133-200 JC
››Multifunctional pliers for the mechanical and electronic use

Power side cutter No. 8316-160 JC, 160 mm 2C handle 260 155 63 3 2951797 1102-008 0.980
Multiple pliers no. 8133-200 JC, 200 mm 2C handle
Universal pliers no. 142 7 TL
032
033
1100-02
TOOL CASE ELECTRICIAN
››Particularly suitable for electricians
Description Contents W D H pieces Code No. 0

GEDORE L-BOXX Bricklayer's chisel No. 110-256, 250x16 mm 442 357 151 36 2658208 1100-02 7.7
136 with Electricians' chisel No. 112-2510, square 250x10x7 mm
assortment Engineers' hammer No. 600 H-500, 500 g
Electrician 36 pcs Adjustable wrench, open end No. 60 CP 8, 8"
Stripping pliers No. 8097, Automatic
Multiple pliers No.8133-180 JC, 180 mm 2C handle
VDE Side cutter No. VDE 8314-160 H, 160 mm
VDE Bent nose pliers No. VDE 8132-200 H, 200 mm
VDE Bent nose pliers No. VDE 8132 AB-200 H, angled 200 mm
VDE Stripping pliers No. VDE 8098-160 H, 160 mm
VDE Cable shears No. VDE 8094, 200 mm
Universal cable knife No. 4528, blade L. 50 mm
Insulating tape No. 4629, tape L.10 m
Scraper No. 0175-06, blade W. 60 mm
Hexagon socket key No. H 42-10, hex 1.3 1.5 2 2.5 3
4 5 6 8 10 mm
?; VDE Screwdriver set No. VDE 2170-2160 PH-077,
slotted 2.5 4 5.5 6.5 mm, cross-slotted PH 0 1 2
? Voltage tester slotted No. VDE 4616,12-1000 V, 3 mm
Multi-fitting key ELECTRO No. 45 E
Assortment Bricklayer's chisel No. 110-256, 250x16 mm 442 357 151 15 2936836 1100 CT2-02 3.9
Electrician, in Electricians' chisel No. 112-2510, square 250x10x7 mm
2/2 L-BOXX 136 Engineers' hammer No. 600 H-500, 500 g
Module, 15 pcs Adjustable wrench, open end No. 60 CP 8, 8"
Stripping pliers No. 8097, Automatic
Multiple pliers No.8133-180 JC, 180 mm
VDE Side cutter No. VDE 8314-160 H, 160 mm
VDE Bent nose pliers No. VDE 8132-200 H, 200 mm
VDE Bent nose pliers No. VDE 8132 AB-200 H, angled 200 mm
VDE Stripping pliers No. VDE 8098-160 H, 160 mm
Universal cable knife No. 4528, blade L. 50 mm
Insulating tape No. 4629, tape L.10 m
Scraper No. 0175-06, blade W. 60 mm
MOBILITY
1101-003 VDE
VDE TOOL SET
››VDE basic assortment
T P ? ; iO ö 1000 V
VDE Bent nose pliers No. VDE 8132-200 JC, 200 mm 2C handle 367 316 72 8 1828045 1101-003 VDE 2.300
VDE Power combination pliers No. VDE 8250-180 H, 180 mm, 2C handle
VDE Power side cutter No. VDE 8314-160 H, 160 mm
?VDE Screwdriver slotted No. VDE 2170, 4 5,5 mm
1100-1094
VDE TOOL ASSORTMENT HYBRID
››The perfect range of tools for repairs and maintenance of hybrid and electric vehicles
››For vehicles of all the manufacturers
››All tools insulated on the basis of EN 60900/EC 60900
››GEDORE L-BOXX® 136 with easy click attaching system compatible
with the Sortimo® vehicle interior fittings in your service mobile
n c iO ö 1000 V
3/8" VDE Socket No. VDE 30, SW 6 8 9 10 11 12 13 14 15 16 442 357 151 53 2979063 1100-1094 8.3
17 18 19 20 22 mm
3/8" VDE Screwdriver bit socket No. VDE INX 30, AF 8 10 12 mm
3/8" VDE Extension No. VDE 3090 -3 -6, 75 150 mm
3/8" VDE Reversible ratchet No. VDE 3093 U
? VDE Screwdriver slotted No. VDE 2170, 2.5 3.5 4 5.5 mm
; VDE Screwdriver cross-slotted No. VDE 2160 PH 1 2 3
7 VDE Screwdriver TX No. VDE 2163 TX T20 T25 T30
VDE Universal pliers No. VDE 146 10, 10"
VDE Power combination pliers No. VDE 8250-200 H, 200 mm, 2C handle
VDE Power side cutter No. VDE 8314-180 H, 180 mm
VDE Bent nose pliers No. VDE 8132 AB-200 JC, 200 mm angled 2C handle
VDE Flat nose pliers No. VDE 8120-160 H, 160 mm, 2C handle
VDE Cable knife No. VDE 4522, 180 mm
Meter connection fitting No. V 914, Size 1 2 3
034
035
1102-002 VDE
VDE PLIERS SET
››Practical set composition in sturdy plastic cases
››Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900
VDE Bent nose pliers No. VDE 8132-160 H
››Long, flat-round jaws, straight gripping faces, serrated
VDE Power combination pliers No. VDE 8250-180 H
››For heavy continuous use
VDE Side cutter No. VDE 8314-160 H
T P iO ö 1000 V
VDE Bent nose telephone pliers No. VDE 8132-160 JC, 160 mm, VDE Power combination pliers 260 155 63 3 1692291 1102-002 VDE 0.998
No. VDE 8250-180 H, 180 mm, VDE Power side cutter No. VDE 8314-160 H, 160 mm
1102-004 VDE
VDE PLIERS SET
››Practical set composition in sturdy plastic cases
››Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900
VDE Stripping pliers No. VDE 8098-160 H
››Brass adjusting screw for cutting depth adjustment, opening stop for wires 0.8 - 6.0 mm2
VDE Power combination pliers No. VDE 8250-180 H
››To cut all wire types including piano wire, 1.6 mm
VDE Side cutter No. VDE 8314-160 H
P iO ö 1000 V
VDE Stripping pliers No. VDE 8098-160 H, 160 mm, VDE Power combination pliers 260 155 63 3 1708244 1102-004 VDE 1.026
No. VDE 8250-180 H, 180 mm, VDE Power side cutter No. VDE 8314-160 H, 160 mm
1102-005 VDE
VDE PLIERS SET
››Slim PZ screwdriver, VDE multiple pliers and VDE power side cutter
››Handles with VDE insulating sleeves up to 1000 V, to EN 60900/JEC 60900
VDE 2162 PZ VDE screwdriver SLIM DRIVE
››Ultra-small blade diameter yet with full mechanical and electrical safety
VDE 8131 AB VDE multiple pliers
››Cable cutter: for easy cutting of cables up to 5x2.5 mm2 or Ø 12 mm
››Stripping blades: Stripping possibility for wires 1.5 mm2 and 2.5 mm2
››Crimp profile: Crimping of conductor end-sleeves
VDE 8314 VDE side cutters
iO ö 1000 V
VDE Power side cutter no. VDE 8314-180 H, 180 mm, VDE Multiple pliers 260 157 63 3 2951762 1102-005 VDE 0.955
no. VDE 8131 AB-200 JC, 200 mm angled, VDE Screws cross-slotted no. VDE 2162 PZ 1, SLIM
MOBILITY
1102-006 VDE
VDE TOOL SET
››For all usual electric master cabinets incl. multi fitting key
››In GEDORE L-BOXX® Mini, incl. divider set
››Handles with VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, insulating sleeves
VDE Multiple pliers No. VDE 8131 AB-200 H
››Cable cutter: enables easy cutting of cables up to 5x2.5 mm2 and Ø 12 mm
››Stripping blades: stripping option for wires of 1.5 mm2 and 2.5 mm2
››Crimp profile: crimping of conductor end-sleeves
VDE Screwdriver SLIM DRIVE No. VDE 2172 3.5
››No problems in reaching screws deeply embedded in screw shafts
VDE Screwdriver SLIM DRIVE PlusMinus No. VDE 2164 SL/PH 2
››Positive-fit joint of handle and blade for optimum transmission of force
››No problems in reaching screws deeply embedded in screw shafts
Multi fitting key ELECTRO No. 45 E
››For all current electric master cabinets
››Magnetic bit adaptor 1/4", supplied with one bit PH 2
››Screwdriver function with retaining clip
iO ö 1000 V
VDE Multiple pliers No. VDE 8131 AB-200 H, angled 200 mm 260 155 63 4 2951770 1102-006 VDE 0.860
? VDE Screwdriver slotted No. VDE 2172, 3.5 mm SLIM
;? VDE Screwdriver cross-slotted No. VDE 2164 SL/PH 2 SLIM
Multi-fitting key ELECTRO No. 45 E
1100-03
INSTALLATION TOOL ASSORTMENT
››Particularly suitable for professions in the sanitary, heating and air conditioning fields
››Two stacked Check-Tool inserts
036
037

GEDORE L-BOXX 136 Combination ratchet spanner No. 7 R, AF 10 13 17 19 24 mm 442 357 151 44 2658216 1100-03 10.3
with assortment Highly efficient, three-position pipe wrench ECK-SCHWEDE-snap
Installation 44 pcs 1.1/2" 100 1.1/2, 1.1/2"
Plumbing wrench No. 322000, 260 mm
Pipe deburring reamer No. 232001, Ø 4-32 mm
Pipe cutter No. 225011, niro Ø 6-35 mm
Miniature pipe cutter MINI-QUICK No. 231000, Ø 4-16 mm
Radiator valve spanner set No. 381000 with extension 1/2" No. 1990-5
Combination stepped key No. 380100, with 5 steps 3/8"-1"
Engineers' hammer ROTBAND-PLUS No. 600 H-500 with hickory handle, 500 g
Hexagon socket key No. SCL 43 TX-80, T9 T10 T15 T20 T25 T30 T40
Profi-key UNIVERSAL No.universal 45 P,
for air-conditioning and locking devices
Hexagon socket key No. H 42-10, hex 1.3 1.5 2 2.5 3 4 5 6 8 10 mm
Basin wrench No. 316500, 260 mm
?; VDE Screwdriver set No. VDE 2170-2160 PH-077,
slotted 2.5 4 5.5 6.5 mm, cross-slotted PH 0 1 2
1100 CT2-03
INSTALLATION TOOL ASSORTMENT
in 2/2 L-BOXX 136 module
››Tool set in Check-tool modules (CT)
››Optical completeness thanks to 2-colour foam inserts
››Slip-free, grip recesses
››Resistant to oil and grease
››For equipping an existing L-BOXX® 136
1100 CT2-03-100 B 1100 CT2-03-600 D

Assortment Combination ratchet spanner No. 7 R, AF 10 13 17 19 24 mm 442 357 151 13 2940590 1100 CT2- 4.4
Installation, in 2/2 Highly efficient, three-position pipe wrench ECK-SCHWEDE-snap 1.1/2" 100 1.1/2, 1.1/2" 03-100 B
L-BOXX 136 module, Universal pliers No. 142 10 TL, 10"
13 pcs Plumbing wrench No. 322000, 260 mm
Pipe deburring reamer No. 232001, Ø 4-32 mm
Pipe cutter No. 225011, niro Ø 6-35 mm
Miniature pipe cutter MINI-QUICK No. 231000, Ø 4-16 mm
Radiator valve spanner set No. 381000
with extension 1/2" No. 1990-5
Combination stepped key No. 380100, with 5 steps 3/8"-1"
Assortment Engineers' hammer ROTBAND-PLUS No. 600 H-500 442 357 151 23 2940604 1100 CT2- 2.6
Installation, in 2/2 with hickory handle, 500 g 03-600 D
L-BOXX 136 module, Bricklayer's chisel No. 110-256, 250x16 mm
23 pcs Hexagon socket key No. SCL 43 TX-80, T9 T10 T15 T20 T25 T30 T40
Profi-key UNIVERSAL No.universal 45 P, for air-conditioning
and locking devices
Hexagon socket key No. 42,
hex AF 1.3 1.5 2 2.5 3 4 5 6 8 10 mm
Basin wrench No. 316500, 260 mm
MOBILITY
1101-2333
TOOL SET
in i-BOXX® 72
››For flaring copper and light-alloy pipes of various hardnesses
››Flange cone 90° hardened = 45° angled from pipe
››For cooling systems and refrigeration technique
››Complete set for metric and metric/inch pipes
Model Contents W D H Code No. 0

Metric sizes for metric pipes 4, 4.75, 6, 8, 10, 12, 14 mm 367 316 72 4555550 1101-233301 2.9
1 flaring tool No. 233000
1 clamping jaw 4-14 mm No. 233101
1 cone 180° No. 233200
1 pipe cutter 3-35 mm Ø No. 2250 3
1 GEDORE i-BOXX® 72 No. 1101 L
1101-2340
DOUBLE FLARING TOOL SET
in i-BOXX® 72
››For standard-compliant (DIN 74234) double flaring tools
››For brake lines, coolant lines, hydraulic and pneumatic pipes
with a wall thickness of 0.7 to 1.0 mm
››Clamping jaws made from steel, smooth inside, phosphated
››Complete set for metric and metric/inch pipes
Model Contents W D H Code No. 0

Metric sizes for metric pipes 367 316 72 4505530 1101-234001 3.0
1 basic frame No. 234000
1 clamping jaw metric No. 234101
6 cones 4,75-10 mm No. 234204-234210
2 cones No. 234790 + 234801
1 miniature pipe cutter 4-16 mm Ø No. 231000
1 pipe deburring reamer Ø 4-32 mm No. 232001
Metric and for metric + inch pipes 367 316 72 4662980 1101-234013 4.2
imperial sizes 1 basic frame No. 234000
2 clamping jaws No. 234101 + 234102
6 cones 4,75-10 mm No. 234204-234210
4 cones 3/16-3/8" No. 234303-234306
3 cones No. 234790 + 234801-802
1 pipe deburring reamer Ø 4-32 mm No. 232001
038
039
1100-2431
MANUAL BENDING TOOL SET
››Sizes from 6 to 15 mm Ø, up to 180°
››Easy bending with reversible ratchet 1/2" in long version
››For soft copper pipes EN 1057 (also with fixed coating),
thin-walled precision steel pipes as well as pipes in non-ferrous metals
››For clamping in a vice or useable as bending pliers
››7 bending formers for pipes with Ø 10, 12, 14, 15, 18, 20 and 22 mm
and corresponding counter-supports
CU CU-ZN INOX FE AL MT

1 bending lever No. 243010 442 357 151 9 4568450 1100-243100 7.4
1 tool holding fixture No. 243070
1 reversible ratchet 1/2” No. 1993 U-10 L
5 pipe bending formers Ø 6, 8, 10, 12, 15 mm
1100-2456
BENDING TOOL SET
hydraulic, in GEDORE L-BOXX® 136, 12 pieces
››For soft copper pipes EN 1057 up to 22 mm (also heat-insulated),
composite pipes up to 20 mm as well as precision steel pipes
EN 10305-3 (DIN 2394) up to 18 x 1.5 mm
››7 bending formers for pipes with Ø 10, 12, 14, 15, 18, 20 and 22 mm
››Hydraulic drive without great effort
››With pipe cutter No. 2250 3

1 basic unit, hydraulic No. 245670 442 357 151 12 2963531 1100-245680 6.9
7 aluminium bending formers
for pipes of Ø 10, 12, 14, 15, 18, 20, 22 mm
3 counter-supports Ø 6-12, 14-17, 18-22 mm
MOBILITY
1100-2456
BENDING TOOL SET
hydraulic, heavy-duty, in GEDORE L-BOXX® 136
››For soft copper pipes EN 1057 up to 22 mm (also heat-insulated),
composite pipes up to 20 mm, precision steel pipes EN 10305-3 (DIN 2394)
up to 18 x 2 mm, as well as annealed stainless steel pipes up to 18 x 1.2 mm
››10 bending formers for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18, 20 and 22 mm
››Hydraulic drive without great effort

1 basic unit, hydraulic No. 245670 442 357 151 15 2963558 1100-245681 9.6
10 aluminium bending formers
for pipes of Ø 6, 8, 10, 12, 14, 15, 16, 18, 20, 22 mm
1 counter-support Ø 6-12 mm
2 counter-supports reinforced Ø 14-17, 18-22 mm
1101-2785
››Sizes from 3 to 10 mm up to 180°
››For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391),
and bendable stainless steel pipes with 0.75 - 1.0 mm wall thicknesses
››5 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8 and 10 mm
››For clamping in a vice or useable as bending pliers
››With pipe cutter No. 231011 and pipe deburring reamer No. 232501

1 basic frame 3-10 mm No. 278570 367 316 72 9 1589849 1101-278501 2.4
1 bending lever 3-10 mm No. 278581
5 aluminium bending formers for pipes with
Ø 3-4, 5, 6, 8, 10 mm
1 pipe deburring reamer 8-35 mm Ø No. 232501
+ GEDORE i-BOXX® 72 No. 1101 L
040
041
1100-2786
››For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391)
with 1.0 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable
stainless steel pipes with 1.0 - 1.5 mm wall thicknesses
››8 bending formers for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm
››For clamping in a vice or in stationary use in combination with tripod No. 268500
CU-ZN
CU CU-ZN
INOX INOX
FE AL
FE MT
AL MT

1 basic frame 6-18 mm No. 278670 442 357 151 12 1611526 1100-278601 8.3
1 bending lever 6-18 mm attachable No. 278680
Ø 6, 8, 10, 12, 14, 15, 16, 18 mm
1 pin punch 3 mm
1100-2788
››For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes
EN 10305-1 (DIN 2391) with 0.75 - 2.0 mm wall thicknesses, composite pipes up to 16 mm
as well as bendable stainless steel pipes with 1.0 - 1.5 mm wall thicknesses
››10 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8, 10, 12, 14, 15, 16 and 18 mm
››For clamping in a vice
››Can be used as bending pliers up to size 10 mm
››As from sizes 12 mm also for stationary use with tripod No. 268500
CU-ZN
CU CU-ZN
INOX INOX
FE AL
FE MT
AL MT

1 basic frame 3-10 mm No. 278570 442 357 151 16 2963515 1100-278801 8.7
1 bending lever 3-10 mm No. 278581
1 basic frame 6-18 mm No. 278670
1 bending lever 6-18 mm attachable No. 278680
Ø 3-4, 5, 6, 8, 10, 12, 14, 15, 16, 18 mm
1 pin punch 3 mm
MOBILITY
1101-5705
SET OF ARC PUNCHES
››To DIN 7200 Form A
››For stamping out cardboard, leather, rubber, sealing materials and other soft materials

Hole diameter 2, 3, 4, 5, 6, 7, 8, 9, 367 316 72 18 2963469 1101-570500 3.830
10, 11, 12, 13, 14, 15, 16, 18, 20, 22 mm
+ GEDORE i-BOXX® 72 No. 1101 L
1100-1.04
UNIVERSAL PULLER SET
››12 different pullers can be combined
››External Ø up to 130 mm, internal Ø up to 170 mm with a 200 mm clamping reach
››Two and three-arm cross-beam
››All-steel slim hooks and extensions
››Extra-slim pulling legs for cramped spaces are attached for self-mounting

Internal extractor Universal puller HIGH POWER No. 1.04/HP1A-B, 2-arm, 130x100 mm 442 357 151 13 2838362 1100-1.04 6.3
assortment in L-BOXX Cross-beam No. 107/1A03, 3-arm 180 mm
136 Pulling leg No. 106/A-100-B, all-steel, leg brake
3x extension No. 106/A-100-VB with leg brake 100 mm
3x pulling leg No. 106/A-100-S, slim 100 mm
3x pulling leg No. 106/S101-S, without clamping part
Spindle No. 1.1406200, 17 M14x1,5 200 mm
Universal puller set, Universal puller HIGH POWER No. 1.04/HP1A-B, 2-arm, 130x100 mm 442 357 151 13 2836068 1100 CT2- 4.1
in 2/2 L-BOXX 136 Cross-beam No. 107/1A03, 3-arm 180 mm 1.04
Module Pulling leg No. 106/A-100-B, all-steel, leg brake
3x extension No. 106/A-100-VB with leg brake 100 mm
3x pulling leg No. 106/A-100-S, slim 100 mm
3x pulling leg No. 106/S101-S, without clamping part
Spindle No. 1.1406200, 17 M14x1,5 200 mm
042
043
1100-1.04/12A
PULLER SET INTERNAL/EXTERNAL
Suppliable in GEDORE L-BOXX® 136
››For clamping depths up to Ø 200 mm external, Ø 70-260 mm internal,
and clamping reach up to 300 mm
››Quick-release pulling legs with integral T-profile for a better transmission of force
››The forged leg feet are very slim particularly suitable for barely accessible places
››In 3 of 4 spindles the spindle tip (ball/tip) can be rotated
››Max. capacity 3 and 5 t

Puller set internal/ Universal puller No. 1x 1.04/1A, 2-arm 130x100 mm 442 357 151 7 2927241 1100-1.04/12A 9.6
external, Universal puller No. 1.04/2A 2-arm 200x150 mm
in L-BOXX 136 Extension with leg brake No. 106/A-100-VB, 100 mm
Extension with leg brake No. 106/B-150-VB, 150 mm
Spindle No. 1.1406200 SW 17 M14x1.5 200 mm
Spindle No. 1.2106350KS, 22, G 1/2", 350 mm, with ball tip
Puller set internal/ Universal puller No. 1x 1.04/1A, 2-arm 130x100 mm 442 357 151 6 2927268 1100 CT2- 7.4
external, in 2/2 Universal puller No. 1.04/2A 2-arm 200x150 mm 1.04/12A
L-BOXX 136 module Extension with leg brake No. 106/A-100-VB, 100 mm
Extension with leg brake No. 106/B-150-VB, 150 mm
Spindle No. 1.1406200 SW 17 M14x1.5 200 mm
Spindle No. 1.2106350KS, 22, G 1/2", 350 mm, with ball tip
1100-1.30
INTERNAL EXTRACTOR SET
››Sliding hammer 1.7 kg and counter-support brace
5-160

Internal extractor assortment Internal extractor No. 1.30/2,12-15 mm 442 357 151 8 2836041 1100-1.30 7.2
in L-BOXX 136 Internal extractor No. 1.30/3,15-19 mm
Internal extractor No. 1.30/4,19-25 mm
Internal extractor No. 1.30/4A, 25-30 mm
Internal extractor No. 1.30/45, 30-35 mm
Counter-brace No. 1.36/1 for 1.30/0 - 1.30/5
Sliding hammer No. 1.35/2, 500 mm, 1,7 kg
Internal extractor assortment Internal extractor No. 1.30/2,12-15 mm 442 357 151 7 2836025 1100 CT2- 5.0
in 2/2 L-BOXX 136 module Internal extractor No. 1.30/3,15-19 mm 1.30
Internal extractor No. 1.30/4,19-25 mm
Internal extractor No. 1.30/4A, 25-30 mm
Internal extractor No. 1.30/45, 30-35 mm
Counter-brace No. 1.36/1 for 1.30/0 - 1.30/5
Sliding hammer No. 1.35/2, 500 mm, 1,7 kg
MOBILITY
1100-1.41/2A
SEPARATOR AND PULLER SET
››For clamping depths from Ø 22 to 115 mm and clamping reach up to 295 mm
››For loosening and pulling tightly-seated parts e.g. taper roller bearings
and inner bearing races

Separator and puller set in Separator puller No. 1x 1.38/2, 70-215 mm 442 357 151 22 2927284 1100-1.41/2A 11.5
L-BOXX 136 Separator No. 1.40/2, 22-115 mm
Set of threaded inserts No. 1.81/20,
for 1 and 2-hole applications, M14x1.5
2x extension No. 1.38/CV M14x1.5
Separator and puller set in 2/2 Separator puller No. 1x 1.38/2, 70-215 mm 442 357 151 21 2927292 1100 CT2-1.41/2A 7.9
L-BOXX 136 module Separator No. 1.40/2, 22-115 mm
Set of threaded inserts No. 1.81/20,
for 1 and 2-hole applications, M14x1.5
2x extension No. 1.38/CV M14x1.5
1101-1.29/1K
BALL BEARING EXTRACTOR SET
in i-BOXX® 72
››Ball bearing extractor set for more than 30 ball bearings
››For removing ball bearings that are both on a shaft and in a housing
››Non-destructive removal of deep-groove ball bearings without dismantling the shaft;
no necessity to drill open the bearing cage (no chippings)
for ball bearing No. Contents W D H pieces Code No. 0

6000 6001 6002 6003 6004 6005 2 Heads with spindle No. 1.29/1 + 1.29/3 367 316 72 9 2963485 1101-1.29/1K 3.050
6006 6007 6008 6009 6010 6011 5 Hook sets No. 1.29/10 - 1.29/35
6012 6200 6201 6202 6203 6204 1 Plug-in handle No. 1.29/0
6205 6206 6207 6300 6301 6302 GEDORE i-BOXX 72
6303 6304 6305 6306 6307 6403 2 Heads with spindle No. 1.29/1 + 1.29/3 367 316 72 8 2964414 1101 CT-1.29/1K 1.750
6404 5 Heads with spindle No. 1.29/10 - 1.29/35
1 Plug-in handle No. 1.29/0
044
045
1101-1.29/3K
BALL BEARING EXTRACTOR SET
in i-BOXX® 72
››Ball bearing extractor set for more than 40 ball bearings
››For removing ball bearings that are both on a shaft and in a housing
››Non-destructive removal of deep-groove ball bearings without dismantling the shaft;
no necessity to drill open the bearing cage (no chippings)
for ball bearing No. Contents W D H pieces Code No. 0

6000 6001 6002 6003 6004 6005 6006 4 Heads with spindle No. 1.29/1 - 1.29/5 367 316 72 13 2964392 1101-1.29/3K 5.780
6007 6008 6009 6010 6011 6012 6200 7 Hook sets No. 1.29/10 - 1.29/45
6201 6202 6203 6204 6205 6206 6207 1 Plug-in handle No. 1.29/0
6208 6209 6210 6211 6212 6213 6300 GEDORE i-BOXX 72
6301 6302 6303 6304 6305 6306 6307 4 Heads with spindle No. 1.29/1 - 1.29/5 367 316 72 12 2964430 1101 CT-1.29/3K 6.195
6308 6309 6310 6311 6403 6404 6405 7 Heads with spindle No. 1.29/10 - 1.29/45
6406 6407 1 Handle No. 1.29/0
1100 L
GEDORE L-BOXX® 136
with easy carry handle
››Impact-resistant ABS plastic
››Splash-proof
››With tool board for order and more storage space
››Easy click plug-system: practical plug connection for two
or more L-BOXX®es, for secure grip and easy to carry
W D H Code No. 0
442 357 151 2823691 1100 L 2.2
1100 R
GEDORE L-BOXX® ROLLER
››Practical, mobile trolley for all L-BOXX® types
››Simply fit and click into place
››Four swivel castors for self-assembly of which two have brakes
››Load capacity up to 100 kg
W D H Code No. 0
646 492 184 2823756 1100 R 4.4
MOBILITY
ET-1100 W
LID TOOL BOARD
empty
››For or retrofittable for any L-BOXX®
››Rubber straps and pockets for inserting tools
››For orderliness and more storage space
››Mounting material is included in delivery
W D H Code No. 0
375 20 310 2678322 ET-1100 W 0.400
1101 L
GEDORE I-BOXX® 72
››Small parts case with transparent cover for getting an immediate impression
››Ideal for keeping small parts and accessories
››Optional inset boxes i3 for an individual range
››Comfort handle
W D H Code No. 0
367 316 72 2823705 1101 L 0.900
1101 K
GEDORE I-BOXX® RACK ACTIVE
››Shelf-like holder for any i-BOXX® 72
››Easy click attaching system, thus compatible with the GEDORE L-BOXX®
136 or with any other L-BOXX® on the market
W D H Code No. 0
442 357 100 2823713 1101 K 1.100
1102 L
GEDORE L-BOXX® MINI
››Can be used together with the GEDORE BOXX®-system
››Especially suitable for small tool sets
››Also usable as small parts box, incl. divider set
W D H Code No. 0
260 155 63 2950529 1102 L 0.4
046
047
E-1101 BT
GEDORE INSETBOX I3
››For GEDORE i-BOXX® 72
››For keeping small parts
››Further subdivision possible with the 2 partitions
W D H Code No. 0
260 78 63 2840006 E-1101 BT 0.100
922
WORK GLOVES M-PACT
››For strongest demands in use
››Extra finger-tip reinforcement
››Hook and loop fastener of sleeve band
››Can also be used as ankle guards
››Ergonomic inside hand reinforcement
Size Code No. 0

S/8 1938738 922 8 0.050
M/9 1938746 922 9 0.050
L/10 1938754 922 10 0.050
XL/11 1938762 922 11 0.050
XXL/12 1938770 922 12 0.050
920
WORK GLOVES FASTFIT
››For universal use
››Snug fitting
Size Code No. 0

S/8 1938576 920 8 0.080
M/9 1938584 920 9 0.080
L/10 1938592 920 10 0.080
XL/11 1938606 920 11 0.080
XXL/12 1938614 920 12 0.080
WT 1056 10
KNEE PADS
pair
››Breathable 3D fabric for wear comfort the whole day long
››Soft lining for comfortable kneeling
››Velcro fasteners with elastic bands for ease in
putting on and taking off
››Universal size
Code No. 0
1818236 WT 1056 10 0.180
GEDORE Werkzeugfabrik GmbH & Co. KG GEDORE IBÉRICA S.L. GEDORE POLSKA Sp. z o.o. GEDORE Tools S.A. (Pty) Ltd.
Remscheider Straße 149 c/Arangutxi 12, Poligono Industrial de Júndiz ul. Žwirki i Wigury 56a 103 Qashana Khuzwayo (Shepstone) Road,
42899 Remscheid · GERMANY 01015 Vitoria Alava · SPAIN 43-190 Mikołów · POLAND New Germany, 3610 - South Africa
Tel. + 49 (0) 21 91- 596 - 0 Tel. +34-945-29 22 62 Tel. +48 (0) 32 / 738-40 10 PO Box 68, New Germany, 3620
Fax + 49 (0) 21 91- 596 - 230 Fax +34-945-29 21 99 Fax +48 (0) 32 / 738-40 20 SOUTH AFRICA
info@gedore.com gedore@gedore.es gedore@gedore.pl Tel. +27 (0) 31 / 705 3587
www.gedore.com www.gedore.es www.gedore.pl Fax +27 (0) 31 / 705 32770
Vertrieb Deutschland general@gedoresa.co.za
GEDORE UK Limited Ferramentas GEDORE do Brasil S.A. www.gedore.co.za
Tel. + 49 (0) 21 91- 596 - 900 Marton Street , SKIPTON BD23 1TF Rua Vincentina Maria Fidélis, 275 Bairro
Fax + 49 (0) 21 91- 596 - 999 North Yorkshire · UNITED KINGDOM Vincentina | Vicentina GEDORE (INDIA) Private Limited
Sales International Tel. +44 (0) 1756 / 70 67 00 São Leopoldo - RS | 93025-340 · BRAZIL 148, Sector 3, IMT Manesar
Tel. + 49 (0) 21 91- 596 - 910 Fax +44 (0) 1756 / 79 80 83 Tel. +55 51-35 89 9200 Gurgaon – 122051
Fax + 49 (0) 21 91- 596 - 911 sales@gedoreuk.com Fax + 55 51-35 89 9222 Haryana · INDIA
www.gedoreuk.com export@gedore.com.br Tel. +91 (0) 124 22910 – 65/66/67
GEDORE Automotive GmbH www.gedore.com.br Fax +91 124 2341067
Breslauer Straße 41 GEDORE France SARL sales@gedoreindia.com
78166 Donaueschingen · GERMANY Parc d'activités des Béthunes - La Mare II GEDORE TOOLS, INC. www.gedore.in
Tel. +49 711 83223-0 10, avenue du Fief - Bât. 12 7187 Bryhawke Circle, Suite 700
Fax +49 711 83223-90 BP 79144 Saint-Ouen-l'Aumône NORTH CHARLESTON, GEDORE TOOLS MIDDLE EAST FZE
F-95074 Cergy Pontoise Cedex · FRANCE SC 29418 · USA P.O Box 372042
GEDORE Torque Solutions GmbH Tél. +33 (0)1 34 40 16 60 Tel. +1-843/225 50 15 West Wing 5B, Office #440
Bertha-Benz-Straße 12 Fax +33 (0)1 34 40 16 61 Fax +1-843/225 50 20 Dubai Airport Free Zone
71665 Vaihingen/Enz · GERMANY jadore@gedore.fr info@gedoretools.com Dubai · U.A.E
Tel. +49 7042 9441-0 www.gedore.fr www.gedoretools.com Tel. +971 4 236 4606
Fax +49 7042 9441-41 info@gedore.ae
info@loesomat.de GEDORE TECHNAG B.V. GEDORE Tool Trading (Shanghai) Co., Ltd.
Flemingweg 7, 2408 AV 1/F., Block 2, 1358 Pingan Road, GEDORE TOOL CENTER OOO
GEDORE AUSTRIA GmbH Alphen aan den Rijn · NETHERLANDS Minhang, Shanghai · CHINA 201109 4.-ya Magistralnaja H11/1
Gedore-Str. 1 Tel. +31 (0) 172 / 42 73 50 Tel. +86-21-3388 7258 123007 Moscow · RUSSIA
8190 Birkfeld / Stmk. · AUSTRIA Fax +31 (0) 172 / 42 73 60 Fax +86-21-3388 7259 Tel. 8 800 100 58 96 (free from Russia)
Tel. +43 (0) 3174 / 363 64 00 technag@gedore.nl Service Hotline: 400 880 1858 Tel. +7 (499) 754 7000
Fax +43 (0) 3174 / 363 83 20 www.gedore.nl info@gedore.cn Fax +7 (8) 985 22 99 88 0
sales.austria@gedore.com www.gedore.cn sales@gedoretools.ru
www.gedore.at
Brands of the GEDORE Group

gedore.com · ochsenkopf.com
Your dealer / stamp:
Delivery without decoration. Technical specifications subject to modifications.

No liability for printing errors. Please ask your local dealer.
Valid from 01/04/2019 until 31/03/2020
3109895_Pro_GED_EN_GEDmobility_19_oP

Mobility 19 20

Uploaded by

Copyright:

Available Formats

Mobility 19 20

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mobility 19 20

Uploaded by

Copyright:

Available Formats

MOBILITY SELECTION 2019 / EN

THERE ARE LOTS OF

Hands free for working, holding on or securing things

Available in the GEDORE @work range are not

And the best thing is that all bags, holsters

L W max. load capacity kg Code No. 0

W H max. load capacity kg Code No. 0

Contents pieces Code No.

W H max. load capacity kg Code No. 0

W H max. load capacity kg Code No. 0

Contents pieces Code No.

W H max. load capacity kg Code No. 0

Contents pieces Code No.

W H max. load capacity kg Code No. 0

Contents pieces Code No.

Description y max. load capacity kg Code No. 0

W H max. load capacity kg Code No. 0

W H max. load capacity kg Code No. 0

Contents pieces Code No.

Contents pieces Code No.

W H D max. load capacity kg Code No. 0

W H D max. load capacity kg Code No. 0

W H max. load capacity kg Code No. 0

Ratchet Sockets Accessories pieces Code No. 0

Ratchet Sockets Accessories pieces Code No. 0

Sockets Ratchet Accessories pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Drawer sizes with the WORKMO® box module equipping grid

Module variants for fitting out individually

1/3 MODULE 2/3 MODULE

CTB2 MODULE CTB3 MODULE

2/3 MODULE 1/3 MODULE 1/3 MODULE B3

1110 WMW-2 1100 L 1110 CTB2-01 1110 CTB2-02

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

1100 L 1100 CTB3-01 1100 CTB3-02

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Wheel diameter Code No. 0

i-BOXX® RACK-ACTIVE click system

The heart of the kit - GEDORE L-BOXX® 136

2 STRONG PARTNERS – 1 SYSTEM

Your advantage For your safety

Contents pieces Code No. 0

Description Contents pieces Code No. 0

Description Contents pieces Code No. 0

Contents W D H pieces Code No. 0

?;TP 1100 W-001

Contents W H pieces Code No. 0

1100 W-002 VDE

? ; < T P iO ö 1000 V 1100 W-002 VDE

Contents W H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0

Contents W D H pieces Code No. 0