SR. NO. Item Description Unit QTY Rate Amount
SR. NO. Item Description Unit QTY Rate Amount
SR. NO. Item Description Unit QTY Rate Amount
SR.
ITEM DESCRIPTION UNIT QTY RATE AMOUNT
NO.
CIVIL WORKS
Section 1.0 Earth Works
Earth work in excavation by mechanical means / manual means in foundation trenches, drains, manholes, soak
1 wells etc. including necessary shoring & strutting, dewatering, getting out the excavated soil, sorting and stacking of Cum 370.00
useful material, dressing of the sides, ramming of bottom , backfilling into trenches and disposal of surplus excavated
earth at non objectionable place within the site as directed by engineer-in-charge. For all civil, electrical and plumbing
works. All kinds of soil or soft rock.
a) Depth upto 1.5m
Filling with available selected approved quality excavated earth (excluding rock and black cotton soil) brought from
anywhere within the site in trenches, plinth, sides of foundations etc. in layers not exceeding 15 cms in depth
2 Cum 230.00
including watering, ramming, consolidating each deposited layer for all leads and lifts.
Carrying out pre construction anti-termite treatment for all types of structure with / without basement with RCC
foundation/RCC wall or with load bearing walled foundation. The chemical used shall be like chloropyriphos , Biflex
TC, lindane etc. as per latest IS code no 6313 (Part II) . Plinth area in plan at GF shall only be measured and paid. A
3 Sqmt 400.00
guarantee bond of 10 years shall be furnished. Rate shall be inclusive of material required for Anti Termite Treatment
and labor for applying.
Providing and laying in position machine batched, machine mixed and machine vibrated design mix fair finish /
smooth finish cement concrete of M20 grade with minimum cement content 325 Kg per cum of concrete for
reinforced cement concrete work for foundations, footings, RCC wall, slabs, beams, columns, staircase, vertical and
horizontal fins, domes, shells and vaults of any shape, all places, all heights including laying of concrete to site by
any means like pumping or tower crane etc., finishing and curing etc. and including Admixtures in recommended
5 proportions as per IS 9103 to accelerate, retard setting of concrete, to improve workability without impairing strength Cum 9.00
and durability as per direction of Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis,
pockets, cutouts etc. and labor for insert sleeves if any wherever required while casting. Rate also to include lift
charges and scaffolding for all heights / depths from FFL / GL. Excluding the cost of centering, shuttering excluding
the cost of reinforcement
Providing and laying half brick masonry with common burnt clay building bricks having compressive strength not less
than 35 Kg/cm2 at all heights, levels, locations and shapes etc. including vertical mullions at every 3m and horizontal
ties at 1m, curing, scaffolding etc. complete as directed by the engineer-in-charge. Concrete and reinforcement shall
9 be paid in relevant item. Sqmt 25.00
(A) 115 mm thick
(ii)CM 1:4 (1 Cement : 4 coarse Sand)
Providing and laying uncoursed (random) rubble masonry brought to the course with Local hard stone of Bhilloda or
Equivalent Region approved quality in foundations and plinth in
10 CM 1 : 6 ( 1 part Cement 6 Parts Sand) Cu. Mt. 700.00
including leveling,curing,scafollding, etc. complete as directed by engineer-in-charge
Providing and laying Mirror polished Ambaji White Marble Flooring in floor Using 15 to 18 mm thick Approximately
600 x 600 mm size with residue and skirting as per the Approved Pattern and Drawing on 20 mm thick cement
mortar 1:3 ( 1cement : 3 coarse sand)with Neat White cement slurry on top of bedding , on 40 mm wired finish
screed 1:2:4 (1 cement : 2 coarse sand : 4 graded stone. Including filling joints with floating white cement slurry,
Mirror Polishing Etc. all Complete.(All work should be executed as per detail Ar. Drawing and detail. Any shade /
10 Colour of ambaji White Marble, stone sample approved by Architect.) This note is also applicable for all type of Sqmt 226.00
Ambaji White marble stone work . All work inclusive of all taxes, transportation, wastage, protection coverings etc. All
mortar dropping shall be cleaned by wet jute brush immediately after completing masonry work to show clean stones
in elevation before closing day's work. Based on basic plans, elevations & sections of Mandir(temple) provided by the
Architect, the contractor shall submit detailed final execution Autocad drawings applicable to all stone works for the
temple to Architect for their approval before issuing the same for execution. The drawings would include all elements
and ornamentation work based on tender items applicable to all stone works for the temple.
Providing and Fixing Cladding of Pre Polished 15 to 18 mm thick Ambaji White Marble of Approximate size 600 X
1200 mm in horizontal Bands of approximately 600 mm on the inside of the temple with Best Ambaji White Quality
Marble fixed with Cement mortar. The marble is to be fixed on plain Plaster Rendering done in Line and Plumb. The
Marble is to be fixed with white cement providing minimum 12mm complete white cement backing to the marble. No
part of gray cement rendering should come in contact with the Marble. The sides of cladding to be glued with Epoxy
of Akemi/Tanex/Bchem,Lapox or as approved equivalent make The Marble surface is to be Polished after fixing
removing all stains and Residual Epoxy filled in the Joints. .(All work should be executed as per detail Ar. Drawing
11 and detail. Any shade / Colour of ambaji White Marble, stone sample approved by Architect.) This note is also Sqmt 150.00
applicable for all type of Ambaji White marble stone work . All work inclusive of all taxes, transportation, wastage,
protection coverings etc. All mortar dropping shall be cleaned by wet jute brush immediately after completing
masonry work to show clean stones in elevation before closing day's work. Based on basic plans, elevations &
sections of Mandir(temple) provided by the Architect, the contractor shall submit detailed final execution Autocad
drawings applicable to all stone works for the temple to Architect for their approval before issuing the same for
execution. The drawings would include all elements and ornamentation work based on tender items applicable to all
stone works for the temple.
Providing & laying machine cut single polished Flooring work on Plinth in minimum 20 mm thick Up to 1000 mm X
1000 mm Size Polished Rosy Pink Granite of approved Quality .flooring,skirting,dado,sill,parapet top, chajja top etc.
or as per design and drawing in in normal pattern straight or staggered joint with square or rectangular shaped stone
(with grooves (10mm wide or without grooves) in cement mortar 1:6 bedding of average 35mm thickness, pointing
12 Sqmt 385.00
with matching pigment and white cement in joints or filling the grooves with CM 1:2 and matching pigment, curing etc.
complete. The rate shall also include for rubbing and polishing (without scratches and marks of emery’s) with
different grade of emery etc. complete. The work shall be carried out as per the approval of architect and engineer-in-
charge. The rate shall be inclusive of protecting the flooring by plaster of paris and plastic and/or bubble top sheets.
Providing Carving and fixing in position Statue Pedestal ( Pabasan ) in traditional style as per the attached
preliminary Drawing, but having greater carving then shown in preliminary drawing, including preparation of the shop
drawing and executing the work as per the approved drawing. in Ambaji White Marble.(All work should be executed
as per detail Ar. Drawing and detail. Any shade / Colour of ambaji White Marble, stone sample approved by
Architect.) This note is also applicable for all type of Ambaji White marble stone work . All work inclusive of all taxes,
transportation, wastage, protection coverings etc. All mortar dropping shall be cleaned by wet jute brush immediately
20 Cum 2.00
after completing masonry work to show clean stones in elevation before closing day's work. Based on basic plans,
elevations & sections of Mandir(temple) provided by the Architect, the contractor shall submit detailed final execution
Autocad drawings applicable to all stone works for the temple to Architect for their approval before issuing the same
for execution. The drawings would include all elements and ornamentation work based on tender items applicable to
all stone works for the temple.
Providing Carving and fixing in position 65 mm Thick Jali in Dhangadhra Sand stone carved in traditional pattern ,
including preparation of the shop drawing and executing the Jali as shown in attached photos of similar temple but
more detailed as per the approved drawing including finishing the holes properly fixing it in position in the grooves
made for it / with pins , Dowels , use of Epoxy etc as per the approved fixing detail and as required.(All work should
be executed as per detail Ar. Drawing and detail. Any shade / Colour of Dhangadhra Sand stone, stone sample
approved by Architect.) This note is also applicable for all type of Dhangadhra Sand stone work . All work inclusive of
21 Sqmt 162.00
all taxes, transportation, wastage, protection coverings etc. All mortar dropping shall be cleaned by wet jute brush
immediately after completing masonry work to show clean stones in elevation before closing day's work. Based on
basic plans, elevations & sections of Mandir(temple) provided by the Architect, the contractor shall submit detailed
final execution Autocad drawings applicable to all stone works for the temple to Architect for their approval before
issuing the same for execution. The drawings would include all elements and ornamentation work based on tender
items applicable to all stone works for the temple.
Two Nos. of Marble Niches in Koli Mandap area in Traditional Style in Ambaji White Marble as per the attached
preliminary Drawing, but having greater carving then shown in preliminary drawing, including preparation of the shop
drawing and executing the work as per the approved drawing. in Ambaji White Marble..(All work should be executed
as per detail Ar. Drawing and detail. Any shade / Colour of ambaji White Marble, stone sample approved by
Architect.) This note is also applicable for all type of Ambaji White marble stone work . All work inclusive of all taxes,
transportation, wastage, protection coverings etc. All mortar dropping shall be cleaned by wet jute brush immediately
after completing masonry work to show clean stones in elevation before closing day's work. Based on basic plans,
22 Cum 2.00
elevations & sections of Mandir(temple) provided by the Architect, the contractor shall submit detailed final execution
Autocad drawings applicable to all stone works for the temple to Architect for their approval before issuing the same
for execution. The drawings would include all elements and ornamentation work based on tender items applicable to
all stone works for the temple.
Electrical Works
Distribution Board
Supply, Assembling, grouting, leveling Connecting & testing D.B.of specified make. Scope includes supply &
7.2.2 installation of all the internal wiring as shown in the SLDs. No. 3.00
SPN Distribution Board
Supplying, erecting, testing and commissioning of SPN D.B. (12 way D.B.) equivalent to Schneider cat no
MGNSPNDD12
MCB:
7.4.1 Supply, Assembling, leveling, connecting & testing following MCBS in boards as specified in 7.1, 7.2.,7.3 No. 24.00
6 to 32 A SP MCB
7.4.2 6 to 32 A DP MCB No. 3.00
7.7 M.S. powder coated enclosure suitable for FP MCB. No. 1.00
7.8.1
Caution Board : No. 3.00
Supply & Installation of Caution boards of size 100 x 100 mm. to be supplied & fixed on the D.B.
LT Cabling
Supply, testing and Laying XLPE steel/GI wire/flat armoured / Un armoured cable of 1100 V grade of Aluminium /
Copper Conductor of following sizes buried in ground or in Pre laid Conduits or mounted on wall with necessary
9.1 clamping arrangement or in pre-laid RCC hume pipe. The vertical cable on wall shall be drawn in pre laid conduit for RMt 150.00
vertical mechanical support complete in all respect.
Copper Cables
6 Sq.mm x 3c Cu. Flexible Un armoured Cable
9.2 2.5 Sq.mm x 3c Cu. Flexible Un armoured Cable RMt 350.00
9.3 4 Sq.mm x 3c Cu. Flexible Un armoured Cable RMt 50.00
9.4 6 Sq.mm x 3c Cu. Arm Cable RMt 25.00
Cable Termination
Supplying & fixing double compression weather proof glands ( CMRI Approved) making joint with necessary bi
10.1. metallic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following
No. 8.00
8 sizes:
Copper Cables
6 Sq.mm x 3c Cu. Cable
10.1.
4 Sq.mm x 3c Cu. Cable No. 4.00
9
10.1.
2.5 Sq.mm x 3c Cu. Cable No. 160.00
10
10.1.
1.5 Sq.mm x 3c Cu. Cable No. 2.00
11
Fabrication
Supplying , fabricating and installation of various sizes MS race way / junction boxes/clamps/hangers for light fixtures/
11.1
for cable trays etc. made out of 14 gauge sheet/Angle/Flat/rod/ channel/box section etc with all necessary Kg 15.00
accessories like bend, junction boxes, coupler, supporting clamps, elbows, hardware, anchor fasteners etc All the
necessary fabrication required will be included in the scope of contractor. Scope also includes two coat of primer and
two coat of paining of each items on all the sides complete in all respect.
12.1.
Loop light point controlled by same switch same as 12.1.1. No. 15.00
2
12.1.
One light point controlled by two, two way 6 A switch No. 1.00
3
12.1.
One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on switch board. No. 6.00
4
12.1.
6 A x 5 pin 250 Volt switched socket outlet point at convenient location. No. 6.00
5
12.1.
6/16 A x 250 V switch socket point on one switch box No. 1.00
6
12.1.
One ceiling fan outlet point controlled by one 6 A switch and 100 W hum free electronic regulator No. 3.00
7
12.1.
Exhaust fan outlet point with 6A 5 pin socket controlled by one 6A single way switch No. 3.00
8
MAINS :
Supplying and Laying mains with 2 nos. of 6 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650
12.2.
V/ 1100 V and 1 nos 4.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to Rmtr 15.00
1
be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI amd FIA approval with all necessary
accessories.
Supplying and Laying mains with 2 nos. of 4 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650
12.2. V/ 1100 V and 1 nos 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to
Rmtr 150.00
2 be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI amd FIA approval with all necessary
accessories.
Supplying and Laying mains with 2 nos. of 2.5 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for
12.2. 650 V/ 1100 V and 1 nos 1.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth
Rmtr 200.00
3 wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI amd FIA approval with all
necessary accessories.
Earthing
Preparation & testing of maintenance free earth electrode with 3 Mtr long, 48 mm dia made from low carbon ISI 1239
marked muscularly bonded with 99.9 % electrolytic cu along with 50 kg premium ground improving compound as per
IS 3043, earth station chamber, chamber cover, strip termination terminals etc. for Body Earthing.
14.1 a) Excavation in hard soil. No. 2.00
c) brick masonry with hinged chamber covers.
d) Back fill compound.
e) 3 Mtr long, 48 mm dia
f) The minimum depth should be 3.3 Mtr.
Earth wire/strips :
Supply and laying cu. earthing required size strips for interconnecting the earthing stations, panels, DB's etc. in built
14.3. up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with :
Rmtr 75.00
1 a) Fixing accessories.
b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes.
25 x 3 mm cu. strip
14.3.
No.8 gauge bare cu. earth wire Rmtr 75.00
4
14.3.
Earth Link : 38mm x 6 mm 1ft Long Cu.earth link fixed by necessary screws on wall. No. 3.00
5
Miscellaneous
PVC PIPES
16.1.
Supplying and laying following sizes PVC pipe of approved make in open / recess manner including excavation and Rmtr 250.00
1
back filling (if required) as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
Follow Up with supply co. for getting supply to temple (individual meter for each temple i.e. 3 Nos.). The scope also
covers lying of L.T. cable from meter to respective temple DB. This also covers to obtain any permission required for
16.2 road crossing from any authority (if required), Filling the necessary application to supply co., following up and getting Lot 1.00
the supply filling the necessary test report to the supply co. All official fees shall be paid by client on presentation of
documentary proof and all other out of pocket expenses shall be of contractor.
Light Fixtures
Supplying, erecting, connecting, testing and commissioning of following type Light Fixture with all necessary
Hardware, Internal Wiring with Lamp, Ballast, Led Driver, Housing for Driver etc. surface mounted / recess mounted /
17.1. Suspended type etc all required accessories Complete in all respect.Prices are inclusive of all accessories like lamp,
Rmtr 15.00
1 ballast etc and with all applicable taxes and duties
Wall mounted Linear LED having approx 30 Watt / RMtr. Equivalent to Catlouge No.Aldabra- matrix techno #
TEK.103.23 or Philips make Cat. No. Vaya Linear 1m complete in all respect.Beam angle as per requirement.
17.1. Warm white LED rope light having approx 5 to 15 Watt / RMtr.Equivalent to Catlouge No. Neo - Neon - LED rope -
Rmtr 60.00
2 LED -2 or Philips make Philips Vaya Cove complete in all respect.
17.1. Recessed ground, narrow distribution 10 Watt to 16W LED uplight fixture with louver Equivalent to Catlouge No.Cat
No 12.00
3 No. iGuzzini 7162 with 10W LED lamp , Narrow beam or Philips Vaya Uplite 16W complete in all respect.
17.1. Surface / Wall mounted wide distribution 70W Metal halide / CDMT Lamp fixture Equivalent to Catlouge No. Meyer-
No 12.00
4 Nightspot 70W or philips make Decoflood2 DVP627 70W CDMTcomplete in all respect like lamp, hardware etc.
17.1. Surface / Wall mounted wide distribution 35 W Metal halide / CDMT Lamp fixture Equivalent to Catlouge No. Meyer-
No 5.00
5 Nightspot 35W or philips make Decoflood2 DVP627 35W CDMTcomplete in all respect like lamp, hardware etc.
Ceiling supended 26 W compact flourescent / T5 lamp decorative fixture with opal diffuser Equivalent to Catlouge
17.1.
No.Tulip shunya pendant# T5P2421 122 Shunya 22P or Philips make - Ecomoods FPG701 complete in all respect No. 6.00
6
like lamp, hardware etc.