Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 145 views

    Datadheet RESINLUX 210 Inglese

    Uploaded by

    Elias Kapa
    RESINLUX 210 is a one-component, solvent-free polyurethane adhesive used to bond materials like polystyrene, polyurethane, and PVC foam, as well as glass, steel, aluminum, and melamine, for applications in construction, transportation, and industrial uses. It has an open time of about 20 minutes at 20°C and 50% relative humidity, and fully cures in 60 minutes. The adhesive is supplied in jerry cans of 5, 10, and 25 kg sizes, as well as 200 kg drums and 0.5 kg bottles for dispenser use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Datadheet RESINLUX 210 Inglese

    Uploaded by

    Elias Kapa
    145 views2 pages
    RESINLUX 210 is a one-component, solvent-free polyurethane adhesive used to bond materials like polystyrene, polyurethane, and PVC foam, as well as glass, steel, aluminum, and melamine, for applications in construction, transportation, and industrial uses. It has an open time of about 20 minutes at 20°C and 50% relative humidity, and fully cures in 60 minutes. The adhesive is supplied in jerry cans of 5, 10, and 25 kg sizes, as well as 200 kg drums and 0.5 kg bottles for dispenser use.

    Original Description:

    Raised floor

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    RESINLUX 210 is a one-component, solvent-free polyurethane adhesive used to bond materials like polystyrene, polyurethane, and PVC foam, as well as glass, steel, aluminum, and melamine, for applications in construction, transportation, and industrial uses. It has an open time of about 20 minutes at 20°C and 50% relative humidity, and fully cures in 60 minutes. The adhesive is supplied in jerry cans of 5, 10, and 25 kg sizes, as well as 200 kg drums and 0.5 kg bottles for dispenser use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    145 views2 pages

    Datadheet RESINLUX 210 Inglese

    Uploaded by

    Elias Kapa
    RESINLUX 210 is a one-component, solvent-free polyurethane adhesive used to bond materials like polystyrene, polyurethane, and PVC foam, as well as glass, steel, aluminum, and melamine, for applications in construction, transportation, and industrial uses. It has an open time of about 20 minutes at 20°C and 50% relative humidity, and fully cures in 60 minutes. The adhesive is supplied in jerry cans of 5, 10, and 25 kg sizes, as well as 200 kg drums and 0.5 kg bottles for dispenser use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    RESINLUX 210

    PRODUCT DESCRIPTION
    RESINLUX 210 is a one-component solvent-free polyurethane adhesive used for the production of sandwich elements and
    other industrial applications. The adhesive is designed to bond manually – with machineries and also for air-spray applications.
    The adhesive gives outstanding adhesion to many substrates..

    TYPICAL USE
    RESINLUX 210 could be used for combination like :
    Polystyrene-, Polyurethane- and P.V.C.- foam, glass reinforced plastics, foam glass, steel- and aluminium sheets, melamine
    plates and many others.
    The finished bonded materials are typically used in the building industry, caravan and cold store-production, train, ship-Truck,
    doors and so on.
    About pedestals for raised floors - we suggest to use a right quantity of resin in order 5/6 grams for single piece.
    Many times the worker puts the resin through the holes present on the bottom of the pedestal – and it is normally enough to
    have a good bonding.
    During the works it is important to keep attention at the temperature of the materials to bonded. Very low temperatures under 0
    °C gives delay time respect the standard situation. It is to be consider if the terms of walking of the floors. In few words having a
    minimum share of humidity RESINLUX 210 should be able to explicate his functionality giving a good bonding between the
    materials to be bonded. The difference that we can find will be in the different curing time of it that are depending from the
    Humidity and the temperatures. Essetre is able to give warranty that temperature when it is up 3 °C do not given any
    problems in terms of bonding.

    TECHNICAL DATA
    Physical form : Dark brown liquid
    Solids content : 100%
    Viscosity (25 °C) : 5000 +/- 500 mPa*s
    3
    Density : 1.1 gr/cm
    Open Time at 20 °C/50% R.H. ca.20 min.
    Cure Time at 20 °C/50% R.H. 60 min.
    Flash point no

    GENERAL INFORMATION
    The open -time is dependent on the surrounding temperature and relative humidity.
    For one side application, the open time is the period during which a joint must be put under pressure in order to obtain the
    necessary degree of counter-wetting by the adhesive for a 100% bond to be achieved. The values gave are averages for
    2
    coating-weight of 100 gr/m at 20 °C and 50% R.H. If the R.H. is below 50% the adhesive layer can be overspread with a fine
    2
    water mist. The amount of water required is in a range of 2-4 gr /m
    Before following this procedure it is advisable to contact our technical service department.

    PREPARATION OF MATERIALS
    The surface to be bonded should be dry, clean and free of dust, oil, fat and residual release agents should be removed with
    cleaning solvents like esters or ketones.
    For the untreated metal surfaces we recommend the use of treatment, for example : Epoxy, Alkyd or dichromate primers , in
    order to achieve higher sheer properties and hydrolysis resistance.
    STORAGE
    The adhesive should be stored in cool and dry place.
    In order to avoid water contamination the drums should be kept close.
    In sealed containers the storage stability of the RESINLUX 210 is 6 months.

    PACKAGING
    Jerry-cans of 5, 10, 25 Kgs; Drums of 200 Kgs.
    Bottle with dispenser kg. 0,5 in boxes of 30 pieces each ( total net weight 15 kg.)

    STORAGE TEMPERATURE NOT BELOW 10°C.

    The above data are the results of our experiences and they have to be considered as suggestions, due to the variety of the
    working conditions.
    Issued on January 2013 version nbr.02

    You might also like