Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 498 views

    WPS ISO 15609 Template PDF

    Uploaded by

    Anil

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WPS ISO 15609 Template PDF

    Uploaded by

    Anil
    498 views1 page

    Original Title

    WPS-ISO-15609-Template.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    498 views1 page

    WPS ISO 15609 Template PDF

    Uploaded by

    Anil

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Doc. No.

    :
    WELDING PROCEDURE SPECIFICATION (WPS)
    (As Per EN ISO 15609-1) Date:

    WPS Method of preparation and cleaning

    WPQR No. Parent Material Designation

    Manufacturer Material Thickness Range (mm)

    Mode of metal transfer Outside Diameter (mm)


    Joint type and Weld Position As Per EN ISO 6947
    type
    Weld Preparation Details (Sketch)*
    Joint Design Welding sequences

    Welding Details
    Type of Wire Feed
    Welding Size of filler Travel Speed Heat Input
    Run Current Range (A) Voltage Range (V) Current & Speed
    Process material (mm) (mm/min) (kJ/mm)
    Polarity (mm/sec)

    Note:- 1.The upper limit of heat input shall not cross 25% more than that used in welding the WPQR.
    & The lower limit heat input shall not minimized 25% lower than that used in welding the WPQR
    2.Weld joint area (covering 25mm both side) shall be cleaned by wire brushing.

    Filer Material designation and Make

    Any specific Baking or Drying


    Designation Gas/Flux- Shielding
    Designation Gas/Flux- Backing
    Gas Flow Rate- Shielding
    Gas Flow Rate- Backing
    Tungsten Electrode Type/ size
    Details of Back Gouging/ Backing
    Pre- Heat temperature
    Inter-pass Temperature
    Post - Heating
    Post Weld Heat Treatment (time, temp., method, heating, cooling rates)*
    Other Information*
    Weaving (maximum width of run)
    Oscillation (amplitude, frequency & Dwell time)
    Pulse Welding Details
    Distance contact tube/work piece
    Plasma Welding Details
    Torch Angle
    Other information :
    Date of Issue: Location:
    Prepared By Reviewed By Approved By Approved By

    Sign Sign Sign Sign


    Name: Name: Name: Name
    Date:- Date:- Date:- Date

    You might also like