Installation - Requisitos PDF

Pulse 4.
12
SCADA/HMI
Installation Guide
Copyright
The information in this document is subject to change without prior notice
and does not represent a commitment on the part of AFCON Control and
Automation Ltd., AFCON Software and Electronics Division.
No part of this document may be used or reproduced in any manner

whatsoever without written permission from AFCON Control and
Automation Ltd., AFCON Software and Electronics Division.
The software described in this document is furnished under a license

agreement or a non-disclosure agreement.
The software may be used or copied only in accordance with the terms of
the agreement. It is against the law to copy this software on any other
medium for any purpose other than the purchaser's personal use.
© Copyright 2018 AFCON Control and Automation Ltd., AFCON Software

and Electronics Division.
All rights reserved.
Pulse logos are registered trademarks of AFCON Control and Automation

Ltd., AFCON Software and Electronics Division.
Windows® is a registered trademark of Microsoft Corporation in the United

States and other countries.
Table of Contents
System Requirements................................................................................................................ 1
Hardware Requirements ....................................................................................................... 1
Pulse Standalone Configuration ........................................................................................ 1
Pulse Server ....................................................................................................................... 2
Pulse Client ........................................................................................................................ 2
Deploy to Flash Drive......................................................................................................... 2
Software Requirements ......................................................................................................... 3
Additional Software Requirements ....................................................................................... 5
Additional Software Requirements for Data Logger and Redundancy ................................. 6
Mandatory Services ............................................................................................................... 6
Pulse Database .................................................................................................................. 6
Installing IIS and MSMQ Services .............................................................................................. 7
Installing IIS and MSMQ on Windows 7 ................................................................................ 8
Installing IIS on Windows 7 ............................................................................................... 8
Installing MSMQ on Windows 7 ........................................................................................ 8
Installing .NET Framework, IIS & MSMQ on Windows 8 ....................................................... 9
Installing .NET Framework on Windows 8......................................................................... 9
Installing IIS and MSMQ on Windows 8 .......................................................................... 10
Installing .NET Framework, IIS & MSMQ on Windows 10 ................................................... 14
Installing .NET Framework on Windows 10 .................................................................... 14
Installing IIS and MSMQ Server on Windows 10 ............................................................. 15
Installing IIS and MSMQ on Windows Server 2008 ............................................................. 18
Installing IIS on Windows Server 2008 ............................................................................ 18
Installing MSMQ on Windows Server 2008 ..................................................................... 19
Installing .NET Framework, IIS and MSMQ on Windows Server 2012 ................................ 20
Deactivating UAC ............................................................................................................. 20
Installing .NET Framework on Windows Server 2012 ..................................................... 22
Installing IIS and MSMQ on Windows Server 2012 ......................................................... 23
Installing IIS, .NET Framework, and Message Queuing on Windows Server 2016 .............. 30
Installing Pulse ......................................................................................................................... 36
Installing Communication Drivers ....................................................................................... 44
Pulse 4.12 Installation Guide i

Pulse 4.12 Installation Guide ii
System Requirements
Hardware Requirements
Pulse Standalone Configuration
 3 GHz Core i7 or faster
 Minimum 8 GB RAM (16 GB recommended)
NOTE The RAM size has to be increased as the database size

increases, to ensure optimal performance.
 320 GB of free hard disk space
NOTE The size of the free hard disk space has to be increased as the
size of the database increases, to ensure optimal performance.
 Super VGA 3D display card with a minimum of 512 MB DDR3

memory
 Keyboard and mouse or compatible pointing device
 Network adaptor 100/1000 MB
 USB
 SEK (supplied with Pulse package); without the SEK, Pulse runs in
Demo mode.
Pulse 4.12 Installation Guide 1

Pulse Server
 2.4 GHz Xeon Quad Core processor 2.4 or faster
 Minimum 16 GB RAM (32 GB recommended)
NOTE The RAM size has to be increased as the database size

increases, to ensure optimal performance.
 Minimum 150 GB free SAS hard disk space
NOTE The size of the free SAS hard disk space has to be increased as
the size of the database increases, to ensure optimal
performance.
 USB (for Virtual Machine: USB over TCP adaptor)
 SEK (supplied with Pulse package); without the SEK, Pulse runs in
Demo mode.
Pulse Client
 3 GHz i5 or faster (i7 recommended)
 Minimum 3 GB RAM (4 GB RAM recommended)
 60 GB free hard disk space
 Super VGA 3D display card with a minimum of 512 MB DDR3

memory
Deploy to Flash Drive

Pulse Client Running from a USB Flash Drive
 1 GB free disk space
 USB2 or faster port

Software Requirements
The table below details the operating systems that you can use to run
both Pulse server and client components.
Pulse Components
Operating Systems Pulse Pulse Stand-
Server Client alone
Windows 7 Home No Yes** No
Windows 7 Professional 32-Bit No Yes** Yes*, **
Windows 7 Professional 64-Bit No Yes** Yes**
Windows 7 Enterprise 32-Bit No Yes** Yes*, **
Windows 7 Enterprise 64-Bit No Yes** Yes**
Windows 7 Ultimate 32-Bit No Yes** Yes*, **
Windows 7 Ultimate 64-Bit No Yes** Yes**
Windows 8.1 32-Bit No Yes No
Windows 8.1 64-Bit No Yes No
Windows 8.1 Professional 32-Bit No Yes Yes*
Windows 8.1 Professional 64-Bit No Yes Yes
Windows 10 Professional No Yes Yes
Windows Server 2008 Standard 64-Bit Yes*** Yes*** Yes***
Windows Server 2008 R2 Standard Yes** Yes** Yes**
Windows Server 2012 Standard Yes Yes Yes
Windows Server 2012 R2 Standard Yes Yes Yes
Windows Server 2016 Standard Yes Yes Yes

* Installing Pulse Server/Standalone successfully on a 32-Bit
operating system depends on the application size.
NOTE Pulse 3.0 and higher versions are not supported in Windows
Server 2003 and Windows XP.

** When using Supreme Report, it is required to install the Service
Pack 1 (SP1) of this Windows 7/Windows Server 2008 R2 operating
system version.
*** This OS does not support Supreme Report.

Additional Software
Requirements
The following list describes other third-party software requirements to run
the Pulse Server:
 Microsoft .NET Framework
 Internet Information Service (IIS) installed on server computer
 Microsoft® Message Queuing Service (MSMQ) installed on server

computer
NOTE For IIS and MSMQ installation instructions, see Installing IIS
and MSMQ Services.
NOTE When installing Pulse 4.12 on Microsoft Windows 8/10 or

Microsoft Windows 2012 Server, it is strongly recommended
to follow the .NET, IIS, and MSMQ instructions in this
document, see Installing IIS and MSMQ Services.
 Internet Explorer® 7 or higher
 User Accounts Control (UAC) disabled
For more information, refer to the relevant installation procedures.
The following software is installed by the Pulse Setup:
 Aladdin HASP Device Driver 7.41
 Microsoft® Visual C++ 2010 SP1 Redistributable Package
 Microsoft® .NET Framework 3.5 SP1
 Microsoft® .NET Framework 4.0
 OPC Core Components 3.0
 Windows Installer 4.5
NOTE If you are using ESET NOD 32 Antivirus™, use version 3 or

higher.

Additional Software
Requirements for Data Logger
and Redundancy
 The SQL Server database Standard edition or a higher version
must be installed and used when working with Data Logger.
 The SQL Server database Standard edition or a higher version

must be installed and used when working with either the
Redundancy Central SQL Database connectivity mode or SQL
Server Merge Replication mode.
NOTE To choose between Redundancy Central SQL Database

connectivity mode or SQL Server Merge Replication
mode, refer to the Pulse Redundancy Guide for more details.
Mandatory Services
The following services must be in the “Started” state on the Pulse Server’s
host computer while the Pulse Server is running. Before starting up Pulse,
ensure that the services are started.
 World Wide Web Publishing Service (IIS)
 .Net TCP Port Sharing Service (SMSSVCHost)
 Microsoft® SQL Server services have to be running if the Microsoft

SQL database is used in a Pulse project.
Pulse Database
CAUTION DO NOT exceed using 90% of your disk space on your Pulse
database. Database Administrators should plan the volume of
storage data in advance according to the database storage
capacity. Too much Report and Log files may cause the Pulse
database to overload. When a significant amount in the
volume of data processed by the Pulse System increases, the
DBA may have to reconfigure the database.

Installing IIS and MSMQ
Services
The Internet Information Service (IIS) is a Web-based platform that is
required to host the Pulse Server.
The Microsoft Message Queuing (MSMQ) service is required for Pulse to

route alarms and messages from the Pulse kernel to their destination
users.
NOTE IIS and MSMQ are not included with the Pulse installation DVD,
and therefore, must be installed separately.
NOTE You must be a member of the Administrators group on the

local computer to install IIS and MSMQ.
 Installing IIS and MSMQ on Windows 7
 Installing .NET Framework, IIS & MSMQ on Windows 8
 Installing .NET Framework, IIS & MSMQ on Windows 10
 Installing IIS and MSMQ on Windows Server 2008
 Installing .NET Framework, IIS and MSMQ on Windows Server 2012

Installing IIS and MSMQ on
Windows 7
Installing IIS on Windows 7
1 From the Windows 7 interface, click Start and then click Control
Panel.
2 In the Control Panel, click Programs and then click Turn

Windows features on or off.
3 In the Windows Features dialog box, select all the features and
then click OK.
Installing MSMQ on Windows 7

1 Open the Control Panel.
2 Click Programs, and then under Programs and Features, click

Turn Windows features on or off.
3 Expand Microsoft Message Queue (MSMQ) Server, expand

Microsoft Message Queue (MSMQ) Server Core, and then
select all the checkboxes for the Message Queuing features.
4 Click OK. If you are prompted to restart the computer, click OK to

complete the installation.

Installing .NET Framework, IIS
& MSMQ on Windows 8
Installing .NET Framework on
Windows 8
To enable the .NET Framework 3.5 features:
1 Go to the Control Panel and then click Programs.
2 Under Programs and Features, click Turn Windows features

on or off.
The Windows Features dialog box is displayed.

If your computer does not have internet connection then do the following:
1 Insert the Windows 8 DVD or mount the ISO image.
2 Open cmd.exe with Administrator privileges.
3 Run the following command:
[‘E:’ the Windows installation media drive letter]: Dism.exe

/online /enable-feature /featurename:NetFX3 /All
/Source:E:\sources\sxs /LimitAccess
4 Click OK.

Windows 8
If the following message is displayed during the Pulse installation then do
the following steps below:
1 Enable the Internet Information Services (IIS) Windows

feature.
2 Enable the Internet Information Services (IIS) > Web

Management Tools > IIS 6 Management Compatibility > IIS
Metabase and IIS 6 configuration compatibility.
3 Enable the Internet Information Services (IIS) World Wide

Web Services > Application Development Features > ASP
.NET.

4 Check the checkboxes as shown below.

5 Continue checking the checkboxes as shown below.
6 Click OK.

The Windows Features window is displayed informing you that
Windows completed the requested changes.

& MSMQ on Windows 10
Windows 10
When the .NET Framework 3.5 feature is not enabled, the following
message is displayed during Pulse installation.
To enable the .NET Framework 3.5 features:
1 In the Microsoft Windows 10 desktop, right-click on Start and

select Control Panel on the menu.
2 In the Control Panel window, click Programs > Programs (and

Features).

on or off.
or
1 Insert the Windows 10 installation media or mount an ISO image.

2 Open cmd.exe with Administrator privilege.
[E: (the Windows installation media drive letter)]:Dism.exe

4 Click OK.
Installing IIS and MSMQ Server on

Windows 10
If the following message is displayed during the Pulse installation then do
the following steps below:
1 Enable the Internet Information Services (IIS) Windows

feature.
2 Enable the Internet Information Services (IIS) > Web

Management Tools > IIS 6 Management Compatibility > IIS
Metabase and IIS 6 configuration compatibility.
3 Enable the Internet Information Services (IIS) World Wide

Web Services > Application Development Features >
ASP.NET 3.5/4.5 or 4.6.
4 Enable the Microsoft Message Queue (MSMQ) Server >

Microsoft Message Queue (MSMQ) Server Core.

5 Check the checkboxes as shown below.

6 Click OK.
The Windows Features window is displayed informing you that

Windows completed the requested changes.

Windows Server 2008
Installing IIS on Windows Server
2008
1 Open the Control Panel, click System and Maintenance, and
then click Administrative Tools.
2 On the right pane, double-click Server Manager.
3 On the left pane of Server Manager, select the node that represents
the server that you are currently working on.
4 In the right pane, expand the Roles Summary section and then
click Add Roles.
The Add Roles Wizard is displayed.
5 Click Next.
The wizard moves to the Select Server Roles step.
6 Select the Web Server (IIS) checkbox and then click Next.
The next wizard step that appears is information that guides you in
the installation.
7 Click Next.
The wizard moves to the Role Services step. A list of available role
services appears. If you click the name of a role, a short description
of the role is displayed.
8 Select all of the role services and their options and click Next and
verify the role service selections.
9 Click Install to start the IIS and ASP.NET installation process.
10 When the installation is complete, click Close.
11 Open the Internet Information Services (IIS) Manager. From the

Start menu, click All Programs, click Accessories, and then click
Run. In the Open box, type inetmgr and then click OK.

12 In the left pane, expand the Local Computer tree to the Web
Service Extensions folder.
13 Set the status of ASP.NET Authorization Rules to Allow.
Installing MSMQ on Windows Server

2008
1 Click Start, point to Programs, point to Administrative Tools,
and then click Server Manager to display the Server Manager.
2 Click Add Features to start the Add Features Wizard.
3 Expand MSMQ, expand MSMQ Services, and then select all the
checkboxes for the Message Queuing features.
4 Click Next, and then click Install. If you are prompted to restart
the computer, click OK to complete the installation.

and MSMQ on Windows Server
2012
Deactivating UAC
The User Account Control (UAC) and the EnableLUA parameter have
to be deactivated before installing Pulse on Windows 2012 Server. Pulse
fails to function if the UAC is not deactivated.
To deactivate the User Account Control (UAC) and EnableLUA

parameter
1 Change the following registry key under the Windows Server 2012
registry.
Set
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Policies\System] EnableLUA = 0
2 Restart Windows Server 2012.
NOTE In the Windows Server 2012 User Account Control Settings

dialog box, set the notification settings to Never notify to
partly disable the UAC. It is not required to restart Windows
after setting the UAC.

Windows Server 2012
If the following message is displayed during the Pulse installation, then
follow the steps below.
1 Go to the Control Panel and then click Programs.

on or off.
3 Enable the .NET Framework 3.5 feature in the Control Panel >
Programs > Turn Windows features on or off.
or
1 Insert the Windows 2012 DVD or mount the ISO image.
2 Open cmd.exe with Administrator privileges.

[‘E:’ the Windows installation media drive letter]:Dism.exe
4 Click OK.

Windows Server 2012
If the following message is displayed during the Pulse installation the
follow the steps below.
1 Enable the Roles Summary > Add Roles > Web Server (IIS)
feature and click Next.
2 Enable the Application Development feature.
3 Enable the Management Tools > IIS 6 Management

Compatibility in the Control Panel > Programs and Features >
Turn Windows features on or off.
4 For the Microsoft Message Queuing (MSMQ), enable Features

Summary > Add Features > Message Queuing in the Control
Panel > Programs and Features > Turn Windows on or off.

5 In the Add Roles and Features Wizard window, select the Role-
based feature-based installation option.
6 Click Next.

7 In the Add features that are required for Web Server (IIS)
prompt, click to activate the Include Management tools (if
applicable) option and click the Add Features button.
8 In the following window, click Add Features to continue.

9 Check to select the checkboxes as shown below and click Add
Features to continue.

10 Check to select the checkboxes as shown below and click Next to
continue.

11 Check to select the checkboxes as shown below and click Next to
continue.

12 Click Install to complete the IIS and MSMQ components
installation.

Installing IIS, .NET Framework,
and Message Queuing on
Windows Server 2016
To install IIS, .NET Framework, and Message Queuing on Windows
Server 2016
1 Open the Control Panel, click Programs and Features.

on or off.
The Add Roles and Features Wizard window is displayed.
3 Select the destination server from the Server Selection page then
click Next.
The Select server roles page is displayed.
4 Click to select the Web Server (IIS) checkbox option from the
Roles list.

As soon as the Web Server (IIS) checkbox option is selected, the
Add features that are required for Web Server (IIS) window is
displayed.
5 Click Add Features and the Web Server (IIS) option are
selected.
6 Click Next.
The Select features page is displayed.

7 Select the .NET Framework 3.5 Features checkbox option in the
Features list.
8 Click to select the .NET Framework 4.6 Features checkbox

option.
The following window is displayed.

9 Click Add Features.
10 Make sure that the .NET Framework 3.5 Features and the .NET
Framework 4.6 Features checkbox options are selected.

11 On the lower part of the Features list, select the Message
Queuing checkbox option.
12 Click Next, Next and then Next again.

The Confirm installation selections page is displayed.
13 Click Install.
14 After installation is completed, click Close and restart your

computer.

Installing Pulse
NOTE Before installing the Pulse Server, verify that your computer
and network meets the system requirements, see System
Requirements.
NOTE When installing Pulse 4.12 in Windows 10, install Microsoft SQL
Server 2014 Express Edition database.
Pulse 4.12 supports upgrade and full installation. Pulse 4.12 does not
support upgrade installation from Pulse 1.52 or lower versions.
If a previous Pulse 1.52 version is already installed, do the following:
1 Back up all projects (using Backup and Restore Wizard).
2 Uninstall any previous version of Pulse.
3 Install Pulse Version 4.12.
4 Restore the backed-up projects.
==============================================
Follow these steps to install the Pulse server.
1 Close all open programs.
2 Insert the AFCON DVD to the DVD drive. The installation process
starts automatically and you can proceed to the next step. If the
installation does not automatically start, go to your DVD drive and
double-click the Setup.exe file.
Alternatively, if you are installing Pulse from a network location,

select Run from the Start menu and then browse to locate and run
the Setup.exe file.
The Pulse - InstallShield Wizard window is displayed.

3 Select the language for installation from one of the following drop-
down list options:
• English (United States)
• German
• Spanish
4 Click OK.
NOTE The Pulse - InstallShield Wizard window may be displayed

if one or more software pre-requisites are not installed, see
Additional Software Requirements on how to install the
required software components before installing Pulse.
The Welcome to the InstallShield Wizard for Pulse window is

displayed.

5 Click Next.
The License Agreement window is displayed.
6 Read the license and click on the I accept the terms in the
license agreement option then click Next.

The Destination Folder window is displayed.
By default, Pulse is installed in the C:\AFCON\Pulse\ folder.
7 Click Change to change the path of the destination folder,

otherwise click Next.

The Custom Setup window is displayed.
8 Select the program features you prefer to install. To install any of

the additional features, click on the feature name to select and
install it.
The installation script only installs two features, Program Files and
Demo Project. Microsoft SQL Server 2008 Express (or Microsoft SQL
Server 2014 Express Edition in Microsoft Windows 10), Supreme
Report and Samples components are not installed by default.
NOTE If the Microsoft SQL Server 2008 Express or Microsoft SQL

Server 2014 Express Edition feature is not installed, the Pulse
Server will utilize the MDB database by default.
9 Click Next.
The Pulse Server Settings window is displayed.
In the Pulse Server Settings window, the server’s external (public)

and internal (private) IP addresses, TCP port and the virtual
directory name are defined (the virtual directory holds the Pulse
client’s files). Use the default settings or define other addresses or
names.

10 Click Next to continue.
The Ready to Install the Program window is displayed and the

wizard is ready to begin installation.

11 Click Install to start the installation process.
The Installing Pulse window is displayed. The installation progress is

shown in the Status progress bar.
When the InstallShield Wizard Completed window is displayed, the

installation process is complete.

12 Click Finish and restart the computer.
NOTE If upgrading from Pulse 1.10

If SQL Server 2005 Express was previously used as your
project database, the Setup program will upgrade it to
Microsoft SQL Server 2008 Express. The installation may pause
and display the following message:
“Microsoft SQL Server 2008 SP1 Installation Failure. To

solve this problem, complete the current Pulse
installation and restart your computer. Run the Pulse
installation again and select the Repair option.”
Follow the instructions to complete the installation

successfully.

Installing Communication
Drivers
In Pulse 4.12, the Pulse Driver Setup Wizard simplifies the process of
installing drivers.
Drivers can be installed either from your AFCON Pulse DVD or downloaded
from the AFCON Web site (www.afcon-inc.com). Click the Products link,
and then click Drivers 32 bit to locate and download the relevant driver
zip file to your computer. Additionally, the Install Driver option in the
Communications Setup dialog box enables assigning an installed driver to
a Pulse project. From all of these entry points, the Driver Setup Wizard
will execute the installation.
To install drivers from the AFCON Pulse DVD
1 Before installing a driver, shut down Pulse.
2 Insert the AFCON DVD into the DVD drive on your computer. Wait
for it to display its contents on your screen.
3 Select Pulse and then select Communication Drivers to open the

Communication Drivers dialog box.

4 Locate and select the required driver. Click the Install button to
run its setup.

The Pulse Driver Setup wizard is displayed.
5 Click Next. Select a project or install the driver into multiple

projects using the standard Windows selection key combinations
(<SHIFT>+click, <CTRL>+click, <CTRL>+A [for all]).

6 Click Next. Review the summary information. You may expand the
driver table to see which files the driver setup will install and their
destination folder.

7 Click Install.
The Install Progress page shows you the progress and status of the
driver installation. When the Current Task and Setup Status bars
display “100%”, the installation is done.
As an option, you can generate, store, and print installation

reports:
Report All Generate a report detailing the installation of

the driver files.
Report Errors Generate a report detailing any errors which

may have occurred during the driver
installation.

8 Click Next. If successful, the wizard notifies that the driver was
successfully installed. If you want to install another driver, click
Install another Driver to start the process again. Otherwise, click
Finish to close the wizard.

Start Pulse The Pulse Server will start up after you click Finish.
Server After the Server completes startup, the Driver Setup
wizard closes.

Installation - Requisitos PDF

Uploaded by

Copyright:

Available Formats

Installation - Requisitos PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Installation - Requisitos PDF

Uploaded by

Copyright:

Available Formats

Pulse 4.

No part of this document may be used or reproduced in any manner

The software described in this document is furnished under a license

© Copyright 2018 AFCON Control and Automation Ltd., AFCON Software

All rights reserved.

Pulse logos are registered trademarks of AFCON Control and Automation

Windows® is a registered trademark of Microsoft Corporation in the United

Pulse 4.12 Installation Guide i

 Minimum 8 GB RAM (16 GB recommended)

NOTE The RAM size has to be increased as the database size

 320 GB of free hard disk space

 Super VGA 3D display card with a minimum of 512 MB DDR3

 Keyboard and mouse or compatible pointing device

 Network adaptor 100/1000 MB

Pulse 4.12 Installation Guide 1

 Minimum 16 GB RAM (32 GB recommended)

NOTE The RAM size has to be increased as the database size

 Minimum 150 GB free SAS hard disk space

 Keyboard and mouse or compatible pointing device

 Network adaptor 100/1000 MB

 USB (for Virtual Machine: USB over TCP adaptor)

 Minimum 3 GB RAM (4 GB RAM recommended)

 60 GB free hard disk space

 Super VGA 3D display card with a minimum of 512 MB DDR3

 Keyboard and mouse or compatible pointing device

 Network adaptor 100/1000 MB

Deploy to Flash Drive

 USB2 or faster port

Pulse 4.12 Installation Guide 2

Windows 7 Home No Yes** No

Windows 7 Professional 32-Bit No Yes** Yes*, **

Windows 7 Professional 64-Bit No Yes** Yes**

Windows 7 Enterprise 32-Bit No Yes** Yes*, **

Windows 7 Enterprise 64-Bit No Yes** Yes**

Windows 7 Ultimate 32-Bit No Yes** Yes*, **

Windows 7 Ultimate 64-Bit No Yes** Yes**

Windows 8.1 32-Bit No Yes No

Windows 8.1 64-Bit No Yes No

Windows 8.1 Professional 32-Bit No Yes Yes*

Windows 8.1 Professional 64-Bit No Yes Yes

Windows 10 Professional No Yes Yes

Windows Server 2008 Standard 64-Bit Yes*** Yes*** Yes***

Windows Server 2008 R2 Standard Yes** Yes** Yes**

Windows Server 2012 Standard Yes Yes Yes

Windows Server 2012 R2 Standard Yes Yes Yes

Windows Server 2016 Standard Yes Yes Yes

Pulse 4.12 Installation Guide 3

Pulse 4.12 Installation Guide 4

 Microsoft .NET Framework

 Internet Information Service (IIS) installed on server computer

 Microsoft® Message Queuing Service (MSMQ) installed on server

NOTE When installing Pulse 4.12 on Microsoft Windows 8/10 or

 Internet Explorer® 7 or higher

 User Accounts Control (UAC) disabled

For more information, refer to the relevant installation procedures.

The following software is installed by the Pulse Setup:

 Aladdin HASP Device Driver 7.41

 Microsoft® Visual C++ 2010 SP1 Redistributable Package

 Microsoft® .NET Framework 3.5 SP1

Windows 7 Professional 64-Bit No Yes Yes

Windows 7 Enterprise 64-Bit No Yes Yes

Windows 7 Ultimate 64-Bit No Yes Yes

Windows Server 2008 Standard 64-Bit Yes* Yes* Yes***

Windows Server 2008 R2 Standard Yes Yes Yes**