Festo FC 660
Festo FC 660
Festo FC 660
Info 804
The IPC FEC Standard is the standard miniature controller: ensuring condensed, simpler and faster automation technology as standard features. The shrinking control cabinet The IPC FEC Standard is not only extremely small, above all it helps reduce control cabinet size. Space and time are saved with the help of the plug connectors at the front, and the sensor-actuator plug which eliminates the need for a terminal strip. Rapid programming Programming with FST software, which has been in use for decades, is ideal for small, high speed applications: Programming the way you think: IF THEN ELSE as simple as the controller itself. Including a ladder diagram for use with Windows.
Simple networking The IPC FEC Standard can also be operated as a mini-controller as a full capability network partner for communication between controllers, programming via Ethernet and TCP/IP, operation on the intranet / Internet. The intelligent all-rounder with worldwide service options An extremely concentrated service network spanning more than 170 countries ensures adherence to technical operating standards throughout the world in a trouble-free fashion. Ideal for original equipment manufacturers, as well as for end users. Advantages as a glance: Robust controller with minimal space requirement Analogue inputs and outputs, as well as optional Ethernet interface Time-saving installation with sensor-actuator connector SAC User oriented software program the way you think
A born all-rounder: the IPC FEC Standard. Allowing you to fully adapt a controller to your project. Fast, simple and space-saving.
Simple configuration
Control
Visualisation
and programming: The Festo FST software tool not only supports final programming of FEC Compact, FEC Standard and CPX-FEC controllers, but even the developmental process as well.
and pre-processing: The sturdy miniature controller with analogue value processing, e.g. for acquiring measured values.
and monitoring: Logical expansion of FEC controllers, e.g. with Festos FED front end displays as manmachine interfaces.
Benefit from progress: Are productivity economy and a productivity, sound future investment the most important factors in your decision making process? If so, the FEC is the preferred choice for project decision makers, electricians and pneumatics technicians.
1.
50% less space for the control cabinet allows for improved concepts when laying out electronics and machine functions.
Smaller control cabinets and simpler installation facilitate project engineering and planning.
2.
PLC and PC technology in a single housing Network compatibility in a miniature controller Programming with time tested FST
Universal hardware for various tasks with different programming simplifies purchasing and training.
3.
Easy replacement
Consistent control sequence from controller to actuator: You can fully rely upon Festo for the entire control sequence. From compressed air preparation through drive units and valve terminals, right on up to the controller itself, all functions intermesh smoothly. Eliminate week points in your control sequence as well with perfectly matched components.
FEC stand-alone solution: 2 serial ports are always available COM port for programming and debugging EXT port for control unit, barcode scanner, modem etc.
FST
Sensors Faster with SAC connector technology: SAC connector technology provides the IPC FEC Standard installed in a control cabinet with the decisive advantage: up to 50% less space, and up to 40% less installation time. FEC network solution: An Ethernet interface is alternatively available for each FEC, allowing for: Communication between controllers Programming and debugging Data exchange with Windows programs by means of DDE or OPC Web server Transmission of e-mails from the controller
Valves
Time tested, PC based: PC-based: Discover a complete range of controllers. Theyre all based on PC architecture including Ethernet and web servers. Each CPU is a programmable logic controller and an industrial PC. This makes expansion and modification possible that would be unthinkable with conventional systems.
Cylinders
Relays
Motors
Economical with time and space: The FEC controller range but not with regard to the multiplicity of connection options, openness and compatibility.
IPC FEC Standard The IPC FEC Standard is part of a complete range of controllers. It allows you to fully adapt control technology to your project. IPC FEC Compact The IPC FEC Compact is the low-cost controller of the IPC FEC range. In a simple plastic housing with screw terminals for sensors and actuators, the IPC FEC Compact combines top quality technology with low prices. The same processor, the same high-speed counters and analogue I/Os, and the same two serial ports and network connectability via Ethernet featured by the IPC FEC Standard are at the heart of the compact controller as well. It differs from the IPC FEC Standard by its connection technology and limitation to a single controller with 20 digital I/Os, or 16 digital and 3 analogue I/Os.
Professional solutions, both large and small Together with its subsidiary, Beck IPC GmbH, Festo is expanding automation technology in both directions. IPC@CHIP The IPC@CHIP provides users with a miniature, chip-sized controller, ideal for creating ones own solutions which require a separate housing and individual configuration. IPC PS1 The IPC PS1 facilitates expansion of the modular system with more than 100 different modules from all areas of automation and PC technology. Positioning and fieldbus systems for PLC technology, memory modules, printers and communications for PC technology, programming in FST for PLC technology, and programming in C/C++ for PC technology. The IPC PS1 has extended the boundaries of automation technology with additional I/Os and more functions.
The installation-saving controller The FEC Standard is not just a new mini controller. It shows that there is still room for innovation in mini controllers at the start of the new millennium. With its robust extruded aluminium housing, it demonstrates that compact design and toughness can go hand in hand. Its connector system is accessible from the front, ensuring no wastage of space within control cabinets. And the sensor/actuator connector system SAC, making its world premiere in this product, very largely replaces terminal strips in the I/O area. This means that control cabinets with FEC Standard have a decisive advantage: Up to 50% less space required, and up to 40% less time. Thanks to the integration of a highspeed counter into every CPU, this mini controller is well able to carry out counting and simple positioning operations. Additionally, the optional analogue inputs/outputs turn a smart mini controller into a smart process controller. The two serial interfaces in every CPU make the FEC Standard into a talented communicator which allows programming via one interface and operation and monitoring via the other, at the same time. The leading concept in communication today is Ethernet, the network of networks. This can of course be integrated into FEC Standard as an option. After all, smart automation technology demands smart network technology. With Ethernet and a web server, the FEC Standard paves the way for the visualisation technology of tomorrow: Controller surfing.
Power supply The FEC Standard is powered exclusively via 24 V DC as per modern control cabinet technology. 24 V DC (+25%/-15%) power supply for the controller itself, 24 V DC (+/25%) power supply for the input signals, positive switching, 24 V DC output signals 400 mA, proof against short-circuits and lowresistance loads. The analogue inputs/outputs are 0(4) ... 20 mA I/Os, 12 bit resolution.
The three-wire version of the connector has internally connected straps for 0 V and 24 V DC. This allows any sensor (up to 3 wires) or actuator (up to the maximum permissible output current) to be fed
directly to the connector. There is no need for a terminal strip for sensors and actuators. This allows space savings in control cabinets of up to 50%.
The SAC uses a tension-spring contact system. This means no need for screw connections. Solid wires can simply be pushed into the connector, while in the case of finely-stranded wire, all that is necessary is to open the contact by pressing on the relevant pin and then introduce the wire. Cable end sleeves can be used if desired but are not essential. The tension-spring system and the fact that no terminal strip between the controller and sensors/actuator is required means that a time saving of up to 40% can be achieved during installation.
The pin assignment for the I/O panel is simple and is always the same: Pin 1 +24 V DC Pin 2 Bit 0 Pin 3 Bit 1 Pin 4 Bit 2 Pin 5 Bit 3 Pin 6 Bit 4 Pin 7 Bit 5 Pin 8 Bit 6 Pin 9 Bit 7 Pin 10 0V
The power supply for the LEDs is taken from the signal pins in the connector. This means that the entire input assignment can be checked without a controller.
Or does your machine work through a sequence step by step? First, this cylinder must advance and stop the workpiece, and then the workpiece must be clamped, and then finally...
FEC Standard Aluminium Extruded housing Can be mounted on top-hat rail 2 serial interfaces FC4XX 16 digital inputs 8 digital outputs 4 slots (96.3 mm) FC400 FC440 Ethernet 10BaseT
FC6XX 32 digital inputs 16 digital outputs 6 slots (138.9 mm) FC600 FC640 Ethernet 10BaseT FC620/660 3 analogue inputs 1 analogue output FC620 FC660 Ethernet 10BaseT
10
1 1 In each case 16 digital inputs, 24 V DC, positive-switching 2 Optionally: 3 analogue inputs/ 1 analogue output
11
FEC-FC400 Number Number of above usable as high-speed inputs (max. 2 kHz) Input voltage/current Nominal value for TRUE Nominal value for FALSE Input signal delay Electrical isolation Permissible length of connecting cable Status display via LED Analogue inputs FEC-FC400 Number Signal range Resolution Conversion time Permissible length of connecting cable Digital outputs FEC-FC400 Number Contacts Current/voltage Short circuit proof Proof against low-resistance loads Overload-proof Electrical isolation Switching speed Electrical isolation in groups Maximum group current Switching cycles Status display via LED Analogue outputs FEC-FC400 Number Signal range Resolution Conversion time Max. load resistance 0 0(4) ... 20 mA 12 bit 10 ms 700 0 0(4) ... 20 mA 12 bit, 3 LSB 10 ms Max. 30 m
FEC-FC440
FEC-FC600
FEC-FC620
FEC-FC640
FEC-FC660
16 32 2 Minimum pulse length for TRUE: 250 s, Minimum pause length for FALSE: 250 s 24 V DC, typical 5 mA 15 V DC min. 5 V DC max. Typical 5 ms Yes, via optocoupler Max. 30 m Optional, in connector
FEC-FC440 0
FEC-FC600 0
FEC-FC620 3
FEC-FC640 0
FEC-FC660 3
FEC-FC440
FEC-FC600 16
FEC-FC620
FEC-FC640
FEC-FC660
8 Transistor 24 V DC, max. 400 mA Yes Yes, up to 5 W Yes Yes, via optocoupler Max. 1 kHz Yes, in each case 1 byte 3.2 A Unlimited Optional, in connector
FEC-FC440 0
FEC-FC600 0
FEC-FC620 1
FEC-FC640 0
FEC-FC660 1
12
Serial interface FEC-FC400 Number Connection Features Use as RS232c Terminal assignment SM14/15 Use as RS485 Use as programming interface Use as universal interface: COM Use as universal interface: EXT SAC connector FEC-FC400 Number of connectors required Insulating material Temperature range p g Flammability class Grid dimension Connector system Insulation-stripping length Clamping range Single-conductor H05(07)V-U Multi-stranded without cable end sleeves Multi-stranded with cable end sleeves in accordance with DIN 46 228/1 Multi-stranded hot-dip galvanized Current rating for strap contacts Current rating for individual contacts Ethernet FEC-FC400 Number Bus interface Data transmission speed Connector Supported protocols OPC server DDE server FEC-FC440 FEC-FC600 0 FEC-FC620 0 FEC-FC640 1 FEC-FC660 1 0 1 IEEE802.3 (10BaseT) 10 Mbits/s RJ45 TCP/IP, EasyIP, http (FST only) upon request Yes, for EasyIP FEC-FC440 FEC-FC600 7 FEC-FC620 8 FEC-FC640 7 FEC-FC660 8 4 4 PBT, colour black PS1-SAC10/SAC30: 20 ... +100 C PS1-SAC11/SAC31: 20 ... +75 C V-0 3.5 mm Spring connection 9 ... 10 mm 0.05 ... 1.5 mm2 0.20 ... 1.5 mm2 0.5 ... 1.5 mm2 0.5 ... 1.5 mm2 FEC-FC440 FEC-FC600 FEC-FC620 FEC-FC640 FEC-FC660 2 RJ12 plug socket Serial, asynchronous, TTL level, no electrical isolation PS1-SM14 or PS1-SM15 required Transmit, receive, RTS, CTS PS1-SM35 required 9600 bits/s, 8/N/1 300 ... 9600 bits/s, 7N1, 7E1, 7O1, 8N1, 8E1, 8O1 300 ... 115,000 bits/s, 7N1, 7E1, 7O1, 8N1, 8E1, 8O1
0.05 ... 0.2 mm2 16 A 2 A (max. 6 A per contact, please note the admissible loads for distributor board and supply contacts)
13
Performance
14
Direct mounting or mounting on top-hat-rail in accordance with DIN EN 50 022 using integrated clip Type L1 L2
FEC-FC4 FEC-FC6
132.1 174.7
114.2 156.8
15
Part No. 183 862 185 205 191 449 197 154 191 450 197 157
Ordering data Connectors for the FEC Standard Designation Features Plug Plug Plug Plug 1-row, no LED, tension-spring system 1-row, with LED, tension-spring system 3-row, no LED, tension-spring system 3-row, with LED, tension-spring system
Part No. 197 159 197 160 197 161 197 162
-H-
Note
Ordering data Cables for the FEC Standard Designation Features Programming cable Converter Converter Cable Earthing set RS232 adapter for programming from PC, complete with neutral modem cable RS232 adapter for connection of any desired devices with a serial interface, with top-hat-rail clip, no neutral modem or RS232 cable RS485 adapter, with top-hat-rail clip Neutral modem cable Earthing set for earthing of cable screening via the H-rail
Part No. 188 935 192 681 193 390 160 786 526 683
-H-
Note
For programming from a PC via RS232, a PS1-SM14 must be ordered separately. For programming via Ethernet, the necessary drivers must first be loaded via RS232 (PS1-SM14).
16
Type FED-50
Operator unit
533 532
FED-90
Ordering data Software and manuals for the FEC Standard Designation Features Programming software g g FST software version 4.X on CD, manuals on CD FST software version 4.1 on CD with manual DIN A5 in German FST software version 4.1 on CD with manual DIN A5 in English System manual FEC Standard, German System manual FEC Standard, English
Part No. 191 440 537 927 537 928 525 368 525 369
Manual
17
Pneumatic cylinders Semi-rotary drives Handling modules Servopneumatic positioning systems Electromechanical drives Positioning controllers and controllers
Standard valves Universal and applicationoptimised valves Manually and mechanically actuated valves Shut-off, pressure control and flow control valves Proportional valves Safety valves Fieldbus systems/ electrical peripherals Fieldbus Direct Installation system CP/CPI Modular electrical terminal CPX
Service unit combinations Filter regulators Filters Pressure regulators Lubricators On-off and soft-start valves Dryers Pressure amplifiers Accessories for compressed air preparation
Services from Festo to increase your productivity across the entire value creation sequence
< Engineering for greater speed in the development process CAD models 14 engineering tools Digital catalogue FluidDRAW More than 1,000 technical consultants and project engineers worldwide Technical hotlines
< Supply chain for greater speed in the procurement process E-commerce and online shop Online order tracking Euro special manufacturing service Logistics optimisation
18
Controllers/bus systems
Accessories
Vacuum generators Vacuum grippers Vacuum security valves Vacuum accessories Standard grippers Micro grippers Precision grippers Heavy-duty grippers
Proximity sensors Pressure and flow sensors Display and operating units Inductive and optical proximity sensors Displacement encoders for positioning cylinders Optical orientation detection and quality inspection
Pneumatic and electropneumatic controllers Programmable logic controllers Fieldbus systems and accessories Timers/counters Software for visualisation and data acquisition Display and operating units
Pipes Tubing Pipe connectors and fittings Electrical connection technology Silencers Reservoirs Air guns
All in all, 100% product and service quality A customer-oriented range with unlimited flexibility: Components combine to produce ready-to-install modules and systems. Included in this are special designs since at Festo, most industry-specific products and customer-specific solutions are based on the 23,000 plus catalogue products. Combined with the services for the entire value creation sequence, the end result is unbeatable economy.
< Assembly for greater speed in the assembly/commissioning process Prepack Preassembly Turnkey pneumatics Handling solutions
< Operation for greater speed in the operational process Spare parts service Energy saving service Compressed air consumption analysis Compressed air quality analysis Customer service
19
Aspects of quality
Quality can be viewed from a number of aspects. A short virtual tour of the Research and Development department, the Production department or the Customer Service Centre speaks more than a thousand words.
>
Innovation quality
Production quality
Lets look at some of the figures: 6.5% of turnover 2,800 patents with 100 new applications every year 3D engineering and simulation 10,600 employees worldwide Each and every one of them a lateral thinker
Your interest is quality and economy therefore we place considerable value on: Minimum production tolerances Ultra-modern, proprietary production methods Core competencies in production Defined quality standards across the entire production chain Strict quality assurance systems: on that you can depend.
20
Price quality
Range quality
Didactic quality
More service for less money. Many of the new and further developments in the Festo product range have one thing in common: they are technically superior and more attractively priced than their predecessor product. Examples are to be found in all product segments: among the drives, valves, valve terminals; among the service units, and among the range of accessories.
For individual solutions. Festo offers components as industry-specific catalogue products as well as standardsbased and highly individual special designs. Ready-to-install combinations of these components play an integral part in the Festo product portfolio as modules or systems. Incidentally, an increasing number of components can be individually configured as modular products.
To complement the products and services for automation, Festo Didactic offers exceptionally efficient training hardware, learning software and seminars of the highest quality. Optimally tailored to your value creation sequence. In short training in practical applications for practical application.
21
Specified limit values for technical data and any specific instructions must be adhered to by the user in order to ensure recommended operating conditions. When pneumatic components are used, the user shall ensure that they are operated using correctly prepared compressed air without aggressive media. When Festo components are used in safety-oriented applications, the user shall ensure that all applicable
national and local safety laws and regulations, for example the machine directive, together with the relevant references to standards are observed. Unauthorised conversions or modifications to products and systems from Festo involve a safety risk and are thus not permissible. Festo does not accept any liability for resulting damages. You should contact Festos advisors if one of the following apply to your application:
The ambient conditions and conditions of use or the operating medium differ from the specified technical data. The product is to perform a safety function. A risk or safety analysis is required. You are unsure about the products suitability for use in the planned application. You are unsure about the products suitability for use in safety-oriented applications.
All technical data applies at the time of going to print. All texts, representations, illustrations and drawings included in this catalogue are the intellectual property of Festo AG & Co. KG, and are protected by copyright law. All rights reserved, including translation rights. No part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo AG & Co. KG. All technical data subject to change according to technical update.
22
23