Vios Interior

INTERIOR ROOF HEADLINING (for Sedan)
IR1
ROOF HEADLINING (for Sedan)

INTERIOR BODY
COMPONENTS
FRONT SEAT HEADREST ASSEMBLY
37 (375, 27)
x4
FRONT SEAT ASSEMBLY LH
BUCKLE SWITCH CONNECTOR
for Front Seat Side Airbag: BUCKLE SWITCH CONNECTOR
IR
AIRBAG CONNECTOR
N*m (kgf*cm, ft*lbf) : Specified torque

B138550E02
IR2
FRONT SEAT HEADREST ASSEMBLY
37 (375, 27)
x4 OCCUPANT CLASSIFICATION ECU CONNECTOR
FRONT SEAT ASSEMBLY RH
for Front Seat Side Airbag:
IR
AIRBAG CONNECTOR
OCCUPANT CLASSIFICATION ECU CONNECTOR

B138551E01
IR3
for 60/40 Split Seat Type:
REAR SEAT OUTER BELT ASSEMBLY
REAR CENTER SEAT OUTER BELT ASSEMBLY
REAR SEATBACK ASSEMBLY RH
REAR SEAT OUTER BELT ASSEMBLY
x2
REAR SEATBACK ASSEMBLY LH

37 (375, 27)
x2
37 (375, 27)
37 (375, 27)
REAR SEAT INNER BELT ASSEMBLY RH
37 (375, 27)
IR
REAR SEAT INNER BELT ASSEMBLY LH
REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY

B138442E02
IR4
for Fixed Seat Type:
REAR SEAT OUTER BELT ASSEMBLY RH
REAR CENTER SEAT OUTER BELT ASSEMBLY
REAR SEAT OUTER BELT ASSEMBLY LH
7.9 (80, 70 in.*lbf)
x3 REAR SEATBACK ASSEMBLY
REAR SEAT INNER BELT ASSEMBLY RH
IR
REAR SEAT INNER BELT ASSEMBLY LH
REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY

B138611E01
IR5
LUGGAGE COMPARTMENT FLOOR MAT
SPARE WHEEL COVER ASSEMBLY
LUGGAGE COMPARTMENT TRIM INNER PAD
IR
for Grand Tire:
LUGGAGE COMPARTMENT TRIM INNER PAD
B138565E01
IR6
w/ Curtain Shield Airbag:
x2 CENTER PILLAR UPPER GARNISH RH
FRONT SEAT OUTER BELT ASSEMBLY RH
42 (430, 31)
FRONT PILLAR GARNISH RH
FRONT DOOR OPENING TRIM WEATHERSTRIP RH
SEAT BELT ANCHOR COVER CAP
CENTER PILLAR LOWER GARNISH RH FRONT DOOR SCUFF PLATE RH
IR
COWL SIDE TRIM BOARD RH
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY RH
N*m (kgf*cm, ft*lbf) : Specified torque Non-reusable part

B138593E01
IR7
x2 SEAT BELT ANCHOR COVER CAP

42 (430, 31)
CENTER PILLAR UPPER GARNISH LH FRONT SEAT OUTER BELT ASSEMBLY LH
FRONT PILLAR GARNISH LH
x2
FRONT DOOR OPENING TRIM WEATHERSTRIP LH
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH FRONT DOOR SCUFF PLATE LH COWL SIDE TRIM BOARD LH
CENTER PILLAR LOWER GARNISH LH
IR

B138594E01
IR8
ROOF SIDE INNER GARNISH RH REAR DOOR OPENING TRIM WEATHERSTRIP RH
IR
REAR DOOR SCUFF PLATE RH
REAR SEAT SIDE COVER RH
Non-reusable part
B134769E01
IR9
ROOF SIDE INNER GARNISH LH REAR DOOR OPENING TRIM WEATHERSTRIP LH
REAR SEAT SIDE COVER LH
IR
REAR DOOR SCUFF PLATE LH
Non-reusable part
B134770E01
IR10
for Manual Transaxle:
SHIFT LEVER KNOB SUB-ASSEMBLY
REAR CONSOLE BOX UPPER FRONT PANEL SUB-ASSEMBLY
INSTRUMENT PANEL LOWER CENTER FINISH PANEL
REAR CONSOLE BOX UPPER FRONT PANEL SUB-ASSEMBLY REAR CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY
CIGARETTE LIGHTER or POWER OUTLET SOCKET CONNECTOR
IR
x2 x2 REAR CONSOLE BOX CARPET
REAR CONSOLE BOX ASSEMBLY
B138443E01
IR11
INSTRUMENT CLUSTER FINISH PANEL
COMBINATION METER ASSEMBLY
x2 x2
UPPER INSTRUMENT PANEL SUB-ASSEMBLY
x2
20 (204, 15)
GLOVE COMPARTMENT DOOR ASSEMBLY
INSTRUMENT PANEL BOX
IR
INSTRUMENT PANEL FINISH PANEL END LH INSTRUMENT PANEL FINISH PANEL END RH

B138444E02
IR12
ROOF HEADLINING ASSEMBLY
x2
x4 x2 ASSIST GRIP COVER ASSIST GRIP SUB-ASSEMBLY
ROOM LIGHT ASSEMBLY
IR
MAP LIGHT ASSEMBLY VISOR ASSEMBLY RH
VISOR HOLDER RH VISOR HOLDER LH VISOR ASSEMBLY LH
B138585E01
IR13
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when removing the front seat. 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working. REMOVE FRONT SEAT HEADREST ASSEMBLY HINT: Use the same procedure for both sides. (a) Push in the lock button of the front seat headrest support and remove the front seat headrest. REMOVE FRONT SEAT ASSEMBLY LH (See page SE5) REMOVE FRONT SEAT ASSEMBLY RH HINT: Use the same procedure as for the LH side. REMOVE REAR SEAT CUSHION COVER PAD SUBASSEMBLY (a) for Fixed Seat Type: (1) Remove the rear seat cushion cover pad subassembly (See page SE-106). (b) for 60/40 Split Seat Type: (1) Remove the rear seat cushion cover pad subassembly (See page SE-46). REMOVE REAR SEATBACK ASSEMBLY RH (for 60/ 40 Split Seat Type) (See page SE-57) REMOVE REAR SEATBACK ASSEMBLY LH (for 60/ 40 Split Seat Type) (See page SE-46) REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type) (See page SE-106) REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) (See page ED-133)
2.
3.
Lock Button
4.
5.
B138501E01
6. 7. 8. 9.
IR
10. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/ 40 Split Seat Type) (See page ED-133) 11. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) (See page ED-134)
IR14
12. REMOVE FRONT DOOR SCUFF PLATE RH (a) Disengage the 11 claws and remove the front door scuff plate. 13. REMOVE FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
B134764
14. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (a) Disengage the 4 claws and remove the instrument panel under cover.
B130349
IR
15. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (a) Remove the 2 screws. (b) Disengage the 3 claws and remove the instrument panel under cover.
B130348
IR15
16. REMOVE COWL SIDE TRIM BOARD RH (a) Disengage the claw and the stud bolt and remove the cowl side trim board. 17. REMOVE COWL SIDE TRIM BOARD LH HINT: Use the same procedure as for the RH side.
B114285
18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Remove the front door opening trim weatherstrip. 19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B134765
20. REMOVE REAR DOOR SCUFF PLATE RH (a) Disengage the 7 claws and remove the rear door scuff plate. 21. REMOVE REAR DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
B134771
22. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (a) Remove the rear door opening trim weatherstrip. 23. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B134772
IR
IR16
24. REMOVE REAR SEAT SIDE COVER RH (a) Disengage the 2 clips and the 4 claws and remove the rear seat side cover. 25. REMOVE REAR SEAT SIDE COVER LH HINT: Use the same procedure as for the RH side.
B134776
26. REMOVE ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: NOTICE: Replace the special clip with a new one when the roof side inner garnish is removed. (1) Disengage the 4 clips and the claw and remove the roof side inner garnish.
Special Clip
B134775E01
(b) w/o Curtain Shield Airbag: (1) Disengage the 4 clips and the claw and remove the roof side inner garnish.
IR
B134774
27. REMOVE ROOF SIDE INNER GARNISH LH HINT: Use the same procedure as for the RH side.
28. REMOVE CENTER PILLAR LOWER GARNISH RH (a) Disengage the 3 claws and 2 clips and remove the center pillar lower garnish. 29. REMOVE CENTER PILLAR LOWER GARNISH LH HINT: Use the same procedure as for the RH side.
B134767

for RH Side:
IR17
30. REMOVE SEAT BELT ANCHOR COVER CAP HINT: Use the same procedure for both sides. (a) Pull portion A, shown in the illustration, toward you, remove the 2 claws on the lower side followed by the claw on the upper side. Then remove the seat belt anchor cover cap.
A for LH Side:
B138431E01
31. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH (a) Remove the bolt and the through anchor. 32. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114296
33. REMOVE CENTER PILLAR UPPER GARNISH RH (a) Disengage the 2 clips and 2 hooks and remove the center pillar upper garnish. 34. REMOVE CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side.
IR
B134768
IR18
Special Clip
35. REMOVE FRONT PILLAR GARNISH RH (a) w/ Curtain Shield Airbag: NOTICE: Install a protective cover onto the curtain shield airbag as soon as the front pillar garnish is removed. Replace the special clip with a new one when the front pillar garnish is removed. (1) Disengage the 2 clips and the 2 claws and remove the front pillar garnish.
B134777E01
(b) w/o Curtain Shield Airbag: (1) Disengage the 2 clips and the 2 claws and remove the front pillar garnish.
B134779
(c) Disconnect the antenna connector. (d) Using a clip remover, remove the 3 clamps.
IR
B134787
IR19
b a
(e) w/ Curtain Shield Airbag: (1) Completely cover the curtain shield airbag with a piece of cloth or nylon and fix the ends of the fabric with adhesive tape, as shown in the illustration. Protective cover size
Area a b Measurement 700 mm (27.56 in.) 120 mm (4.72 in.)
Adhesive Tape
Protective Cover
B138437E01
Special Clip
36. REMOVE FRONT PILLAR GARNISH LH (a) w/ Curtain Shield Airbag: NOTICE: Install a protective cover onto the curtain shield airbag as soon as the front pillar garnish is removed. Replace the special clip with a new one when the front pillar garnish is removed. (1) Disengage the 2 clips and the 2 claws and remove the front pillar garnish.
B134778E01
IR
B134780
IR20
(c) Using a clip remover, remove the 4 clamps.
B134789
b a
(d) w/ Curtain Shield Airbag: (1) Completely cover the curtain shield airbag with a piece of cloth or nylon and fix the ends of the fabric with adhesive tape, as shown in the illustration. Protective cover size
37. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL (See page ME-138)
Protective Cover Adhesive Tape
B138438E01
38. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See page IP-84) 39. REMOVE REAR CONSOLE BOX UPPER FRONT PANEL SUB-ASSEMBLY (See page IP-84) 40. REMOVE REAR CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY (See page IP-84) 41. REMOVE REAR CONSOLE BOX CARPET (See page IP-85) 42. REMOVE REAR CONSOLE BOX ASSEMBLY (See page IP-85)
IR
43. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See page ME-138) 44. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See page ME-138) 45. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See page ME-139) 46. REMOVE COMBINATION METER ASSEMBLY (See page ME-139) 47. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-6) 48. REMOVE UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-6) 49. REMOVE INSTRUMENT PANEL BOX (See page IP-45)
IR21
50. REMOVE ASSIST GRIP COVER HINT: Use the same procedure to remove all the assist grip covers.
B134785
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip cover.
Protective Tape
B114301E01
51. REMOVE ASSIST GRIP SUB-ASSEMBLY HINT: Use the same procedure to remove all the assist grips.
B134786
(a) Disengage the 2 springs and remove the assist grip.
IR
B114302
52. REMOVE VISOR ASSEMBLY RH (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the visor bracket cover.
Protective Tape
B114303E01
IR22
(b) Remove the visor shaft from the visor holder. (c) Disengage the 2 springs and remove the visor. 53. REMOVE VISOR ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114304
60 to 120
54. REMOVE VISOR HOLDER RH (a) Disengage the 2 claws by turning the visor counterclockwise between 60 to 120 and remove the visor holder. HINT: The claw may be damaged during removal. However, it is reusable because this does not effect its function.
B114305E01
55. REMOVE VISOR HOLDER LH HINT: Use the same procedure as for the RH side. 56. REMOVE ROOM LIGHT ASSEMBLY (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.
Protective Tape
B114306E01
IR
Protective Tape
B138435E01
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the cover. HINT: Use the same procedure for both sides.
IR23
(c) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light.
Protective Tape
B114307E01
(d) Remove the roof wire from the claw of the room light. (e) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and disconnect the room light switch base.
Protective Tape
B138436E01
57. REMOVE MAP LIGHT ASSEMBLY (a) Using a moulding remover, disengage the 4 claws and remove the map light.
IR
Moulding Remover
B114309E01
(b) Disconnect the map light connector.
B138432
IR24
58. REMOVE ROOF HEADLINING ASSEMBLY (a) Using a clip remover, remove the 2 clamps.
B134790
(b) Disconnect the roof wire connector.
B134791
(c) Using a clip remover, remove the clamp. (d) Disconnect the antenna connector.
B134788
(e) w/ Curtain Shield Airbag: (1) Using a clip remover, remove the 2 clips. (2) Disengage the 4 hooks.
IR
B134793
(f)
w/o Curtain Shield Airbag: (1) Using a clip remover, remove the 2 clips. (2) Disengage the 2 claws and 4 hooks.
B134794
IR25
(g) Remove the roof headlining from the front door.
B134795
IR
IR26
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when installing the front seat. 1. INSTALL ROOF HEADLINING ASSEMBLY (a) Install the roof headlining into the front door.
B134795
(b) w/ Curtain Shield Airbag: (1) Engage the 4 hooks. (2) Install the 2 clips.
B134793
(c) w/o Curtain Shield Airbag: (1) Engage the 2 claws and 4 hooks. (2) Install the 2 clips.
IR
B134794
(d) Connect the antenna connector. (e) Install the clamp.
B134788
IR27
(f)
Connect the roof wire connector.
B134791
(g) Install the 2 clamps.
B134790
2.
INSTALL MAP LIGHT ASSEMBLY (a) Connect the map light connector.
B138432
(b) Engage the 4 claws and install the map light.
IR
B114346
IR28
3.
INSTALL ROOM LIGHT ASSEMBLY (a) Engage the 4 claws and install the room light switch base. (b) Install the roof wire into the claw of the room light.
B138433
(c) Engage the 4 claws and install the room light.
B114348
(d) Engage the 2 claws and install the cover. HINT: Use the same procedure for both sides.
IR
B138434
(e) Engage the 4 claws and install the room light lens.
B114349
IR29
4.
60 to 120
INSTALL VISOR HOLDER RH (a) Engage the 2 claws by turning the visor holder clockwise between 60 to 120 and install the visor holder. INSTALL VISOR HOLDER LH HINT: Use the same procedure as for the RH side.
5.
B114350E01
6.
INSTALL VISOR ASSEMBLY RH (a) Engage the 2 springs and install the visor. (b) Install the visor shaft into the visor holder.
B114304
(c) Engage the 4 claws and install the visor bracket cover. 7. INSTALL VISOR ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114351
8.
INSTALL ASSIST GRIP SUB-ASSEMBLY HINT: Use the same procedure to install all the assist grips.
IR
B134786
(a) Engage the 2 springs and install the assist grip.
B114302
IR30
9.
INSTALL ASSIST GRIP COVER HINT: Use the same procedure to install all the assist grip covers.
B134785
(a) Engage the 2 claws and install the assist grip cover. 10. INSTALL INSTRUMENT PANEL BOX (See page IP-53) 11. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-11) 12. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-13) 13. INSTALL COMBINATION METER ASSEMBLY (See page ME-140) 14. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-140) 15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-141) 16. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-141) 17. INSTALL REAR CONSOLE BOX ASSEMBLY (See page IP-88) 18. INSTALL REAR CONSOLE BOX CARPET (See page IP-88) 19. INSTALL REAR CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY (See page IP-89)
B114352
IR
20. INSTALL REAR CONSOLE BOX UPPER FRONT PANEL SUB-ASSEMBLY (See page IP-89) 21. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See page IP-89) 22. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL (See page ME-142) 23. INSTALL FRONT PILLAR GARNISH RH (a) w/ Curtain Shield Airbag: (1) Remove the piece of cloth or nylon.
Protective Cover
B138439E01
IR31
(b) Install the 3 clamps. (c) Connect the antenna connector.
B134787
(d) w/ Curtain Shield Airbag: (1) Install 2 new special clips and the clip onto the front pillar garnish. (2) Engage the 2 clips and the 2 claws and install the front pillar garnish.
Special Clip
B134781E01
(e) w/o Curtain Shield Airbag: (1) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B134779
24. INSTALL FRONT PILLAR GARNISH LH (a) w/ Curtain Shield Airbag: (1) Remove the piece of cloth or nylon.
IR
B138440
(b) Install the 4 clamps.
B134789
IR32
(c) w/ Curtain Shield Airbag: (1) Install 2 new special clips and the clip onto the front pillar garnish. (2) Engage the 2 clips and the 2 claws and install the front pillar garnish.
Special Clip
B134782E01
(d) w/o Curtain Shield Airbag: (1) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B134780
25. INSTALL CENTER PILLAR UPPER GARNISH RH (a) Engage the 2 hooks and 2 clips and install the center pillar upper garnish. 26. INSTALL CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side.
B134768
27. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (a) Install the through anchor with the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
IR
B114296
28. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.

for RH Side:
IR33
29. INSTALL SEAT BELT ANCHOR COVER CAP HINT: Use the same procedure for both sides. (a) Engage the 3 claws and install the seat belt anchor cover cap.
for LH Side:
B138431E02
30. INSTALL CENTER PILLAR LOWER GARNISH RH (a) Engage the 2 clips and 3claws and install the center pillar lower garnish. 31. INSTALL CENTER PILLAR LOWER GARNISH LH HINT: Use the same procedure as for the RH side.
B134767
32. INSTALL ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: (1) Install a new special clip and the clip onto the roof side inner garnish. (2) Engage the 4 clips and the claw and install the roof side inner garnish.
IR
Special Clip
B134775E01
IR34
(b) w/o Curtain Shield Airbag: (1) Engage the 4 clips and the claw and install the roof side inner garnish. 33. INSTALL ROOF SIDE INNER GARNISH LH HINT: Use the same procedure as for the RH side.
B134774
34. INSTALL REAR SEAT SIDE COVER RH (a) Engage the 2 clips and the 4 claws and install the rear seat side cover. 35. INSTALL REAR SEAT SIDE COVER LH HINT: Use the same procedure as for the RH side.
B134776
36. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH (a) Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration. Paint mark
Area RH side Color Green Red
Paint Mark
Location Mark
LH side
IR
37. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B134773E01
IR35
38. INSTALL REAR DOOR SCUFF PLATE RH (a) Engage the 7 claws and install the rear door scuff plate. 39. INSTALL REAR DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
B134771
40. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration. Paint mark
Area Color Blue Pink RH side
Paint Mark
Location Mark
LH side
41. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B134766E01
IR
42. INSTALL COWL SIDE TRIM BOARD RH (a) Engage the stud bolt and the claw and install the cowl side trim board. 43. INSTALL COWL SIDE TRIM BOARD LH HINT: Use the same procedure as for the RH side.
B114285
IR36
44. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (a) Engage the 4 claws and install the instrument panel under cover.
B130349
45. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (a) Engage the 3 claws and install the instrument panel under cover. (b) Tighten the 2 screws.
B130348
46. INSTALL FRONT DOOR SCUFF PLATE RH (a) Engage the 11 claws and install the front door scuff plate.
IR
47. INSTALL FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side. 48. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) (See page ED-136) 49. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/ 40 Split Seat Type) (See page ED-137) 50. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) (See page ED-137)
B134764
51. INSTALL REAR SEATBACK ASSEMBLY RH (for 60/ 40 Split Seat Type) (See page SE-65) 52. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-52) 53. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) (See page SE-108)
IR37
54. INSTALL REAR SEAT CUSHION COVER PAD SUBASSEMBLY (a) for 60/40 Split Seat Type: (1) Install the rear seat cushion cover pad subassembly (See page SE-53). (b) for Fixed Seat Type: (1) Install the rear seat cushion cover pad subassembly (See page SE-109). 55. INSTALL FRONT SEAT ASSEMBLY LH (See page SE20) 56. INSTALL FRONT SEAT ASSEMBLY RH HINT: Use the same procedure as for the LH side. 57. INSTALL FRONT SEAT HEADREST ASSEMBLY HINT: Use the same procedure for both sides. (a) Push in the lock button of the front seat headrest support and install the front seat headrest.
Lock Button
58. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 59. INSPECT SRS WARNING LIGHT (See page RS-31)
B138501E01
IR
INTERIOR ROOF HEADLINING (for Hatchback 5 Door)
IR37
ROOF HEADLINING (for Hatchback 5 Door)

INTERIOR BODY
COMPONENTS
PACKAGE TRAY TRIM PANEL ASSEMBLY
DECK BOARD SUB-ASSEMBLY
IR
DECK FLOOR BOX RH
DECK FLOOR BOX LH
B114273E01
IR38
REAR SEAT ASSEMBLY RH NO. 1 REAR SEAT LEG COVER
37 (375, 27)
x6
REAR SEAT ASSEMBLY LH
NO. 2 REAR SEAT LEG COVER
37 (375, 27)
x7
for Hold Down Seat Type:
IR
REAR SEATBACK ASSEMBLY REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
37 (375, 27)
x4

B121713E03
IR39
42 (430, 31)
FRONT DOOR OPENING TRIM WEATHERSTRIP RH FRONT PILLAR GARNISH RH
CENTER PILLAR UPPER GARNISH RH
CENTER PILLAR LOWER GARNISH RH FRONT DOOR SCUFF PLATE RH COWL SIDE TRIM BOARD RH INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY RH
IR

B114276E02
IR40
42 (430, 31)
CENTER PILLAR UPPER GARNISH LH
FRONT SEAT OUTER BELT ASSEMBLY LH
x2
FRONT DOOR OPENING TRIM WEATHERSTRIP LH
IR
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH COWL SIDE TRIM BOARD LH CENTER PILLAR LOWER GARNISH LH FRONT DOOR SCUFF PLATE LH

B114277E02
IR41
w/ Curtain Shield Airbag: ROOF SIDE INNER GARNISH RH REAR CENTER SEAT OUTER BELT ASSEMBLY
REAR DOOR OPENING TRIM WEATHERSTRIP RH
42 (430, 31)
DECK TRIM SIDE PANEL ASSEMBLY RH x2
42 (430, 31)
x2 REAR DOOR SCUFF PLATE RH REAR SEAT OUTER BELT ASSEMBLY RH REAR DECK TRIM COVER
IR

B114274E07
IR42
ROOF SIDE INNER GARNISH LH
w/ Curtain Shield Airbag: REAR DOOR OPENING TRIM WEATHERSTRIP LH
42 (430, 31)
x2
DECK TRIM SIDE PANEL ASSEMBLY LH
IR
REAR DOOR SCUFF PLATE LH
LUGGAGE COMPARTMENT ROOM LIGHT CONNECTOR

B114275E11
IR43
INSTRUMENT CLUSTER FINISH PANEL x2 COMBINATION METER ASSEMBLY x2
x2
x2
20 (204, 15)
NO. 1 SWITCH HOLE BASE
IR
INSTRUMENT PANEL FINISH PANEL END RH
INSTRUMENT PANEL FINISH PANEL END LH

B117770E02
IR44
SEAT BELT ANCHOR COVER
x4
ASSIST GRIP SUB-ASSEMBLY
ASSIST GRIP COVER x8
ROOM LIGHT ASSEMBLY
IR
MAP LIGHT ASSEMBLY VISOR ASSEMBLY RH
VISOR HOLDER RH VISOR HOLDER LH
VISOR ASSEMBLY LH
B114279E08
IR45
w/o Curtain Shield Airbag: ROOF HEADLINING ASSEMBLY
x6 ROOF HEADLINING SERVICE HOLE COVER
ASSIST GRIP SUB-ASSEMBLY ASSIST GRIP COVER
x2
ROOM LIGHT ASSEMBLY
IR
VISOR ASSEMBLY RH MAP LIGHT ASSEMBLY
VISOR HOLDER RH VISOR HOLDER LH
VISOR ASSEMBLY LH
B114280E02
IR46
w/ Curtain Shield Airbag: ANTENNA CORD SUB-ASSEMBLY x6
x7 NO. 1 ROOF WIRE
x4 NO. 5 ROOF SILENCER PAD
NO. 1 ROOF SILENCER PAD
x2
REAR SIDE RAIL SPACER RH
REAR ROOF SILENCER PAD
x2
IR
FRONT SIDE RAIL SPACER RH REAR SIDE RAIL SPACER LH
FRONT SIDE RAIL SPACER LH Non-reusable part

B114281E02
IR47
w/o Curtain Shield Airbag: ANTENNA CORD SUB-ASSEMBLY x4
x6 NO. 1 ROOF WIRE
x4
x2
REAR ROOF SILENCER PAD
x2
IR
FRONT SIDE RAIL SPACER RH
REAR SIDE RAIL SPACER LH FRONT SIDE RAIL SPACER LH Non-reusable part
B114282E02
IR48
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when removing the rear seat. 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (a) Remove the 2 package tray trim suspenders. (b) Remove the 5 pieces of hook tape. (c) Disengage the 2 claws and remove the package tray trim.
2.
Hook Tape
B114569E01
3.
REMOVE DECK BOARD SUB-ASSEMBLY (a) Release the 2 knobs and remove the deck board.
IR
B106371
4. 5.
REMOVE DECK FLOOR BOX RH (a) Release the 2 knobs and remove the deck floor box. REMOVE DECK FLOOR BOX LH HINT: Use the same procedure as for the RH side. REMOVE NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (a) for RH Side: (1) Remove the No. 1 rear seat leg cover (See page SE-89).
6.
B106372
IR49
(b) for LH Side: (1) Remove the No. 1 rear seat leg cover (See page SE-70). 7. 8. 9. REMOVE NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-85) REMOVE REAR SEAT ASSEMBLY RH (for 60/40 Split Seat Type) (See page SE-89) REMOVE REAR SEAT ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-71)
10. REMOVE REAR SEAT CUSHION COVER PAD SUBASSEMBLY (for Hold Down Seat Type) (See page SE114) 11. REMOVE REAR SEATBACK ASSEMBLY (for Hold Down Seat Type) (See page SE-115) 12. REMOVE REAR DECK TRIM COVER (a) Using a clip remover, remove the 2 clips. (b) Disengage the 8 claws and remove the rear deck trim cover.
B117692
13. REMOVE FRONT DOOR SCUFF PLATE RH (a) Disengage the 8 claws and remove the front door scuff plate. 14. REMOVE FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
IR
B114284
IR50
15. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (a) Disengage the 4 claws and remove the instrument panel under cover.
B114571
16. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (a) Remove the 2 screws. (b) Disengage the 3 claws and remove the instrument panel under cover.
B114572
17. REMOVE COWL SIDE TRIM BOARD RH (a) Disengage the claw and the stud bolt and remove the cowl side trim board.
IR
B114285
18. REMOVE COWL SIDE TRIM BOARD LH HINT: Use the same procedure as for the RH side.
19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Remove the front door opening trim weatherstrip. 20. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B130350
IR51
21. REMOVE REAR DOOR SCUFF PLATE RH (a) Disengage the 6 claws and remove the rear door scuff plate. 22. REMOVE REAR DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
B114287
23. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (a) Remove the rear door opening trim weatherstrip. 24. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B130351
25. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH (a) Remove the belt from the rear seat shoulder belt hanger.
B114289
(b) Remove the bolt. (c) Disengage the clip and remove the anchor plate. 26. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
IR
B130498
IR52
27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (a) Remove the 3 screws. (b) Disengage the 3 clips and the 6 claws and remove the deck trim side panel.
B114573
28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (a) Remove the 3 screws. (b) Disengage the 3 clips and the 6 claws. (c) Disconnect the luggage compartment room light connector and remove the deck trim side panel.
IR
B114574
29. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (a) Remove the 2 tongue plates.
B114459
IR53
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the slip joint cover.
Protective Tape
B114460E01
(c) Remove the bolt and the through anchor.
B114461
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the center belt guide.
Protective Tape
B114462E01
Special Clip
30. REMOVE ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: NOTICE: Replace the special clip with a new one when the roof side inner garnish is removed. (1) Disengage the 5 clips. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
IR
B114576E01
IR54
(b) w/o Curtain Shield Airbag: (1) Disengage the 5 clips. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish and remove the roof side garnish.
B114575
Special Clip
31. REMOVE ROOF SIDE INNER GARNISH LH (a) w/ Curtain Shield Airbag: NOTICE: Replace the special clip with a new one when the roof side garnish inner is removed. (1) Disengage the 5 clips. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
B114578E01
(b) w/o Curtain Shield Airbag: (1) Disengage the 5 clips. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
B114577
IR
32. REMOVE SEAT BELT ANCHOR COVER CAP HINT: Use the same procedure for both sides. (a) Pull portion A, shown in the illustration, toward you, remove the 2 claws on the lower side followed by the claw on the upper side. Then remove the seat belt anchor cover cap.
A
B114421E01
IR55
B114296
35. REMOVE CENTER PILLAR LOWER GARNISH RH (a) Disengage the 2 clips and the 2 claws and remove the center pillar lower garnish. 36. REMOVE CENTER PILLAR LOWER GARNISH LH HINT: Use the same procedure as for the RH side.
B114297
37. REMOVE CENTER PILLAR UPPER GARNISH RH (a) Disengage the 3 clips and the 2 hooks and remove the center pillar upper garnish. 38. REMOVE CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side. 39. REMOVE SEAT BELT ANCHOR COVER (See page SB-159)
B114298
Protective Tape
B114299E01
40. REMOVE ROOF HEADLINING SERVICE HOLE COVER (w/o Curtain Shield Airbag) HINT: Use the same procedure to remove all the roof headlining service hole covers. (a) Using a clip remover with its tip wrapped in protective tape, remove the 6 roof headlining service hole covers.
IR
41. REMOVE ASSIST GRIP COVER HINT: The fitting number of the assist grip covers varies with the specifications. (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip cover.
Protective Tape
B114301E01
IR56
42. REMOVE ASSIST GRIP SUB-ASSEMBLY HINT: The fitting number of the assist grips varies with the specifications. (a) Disengage the 2 springs and remove the assist grip.
B114302
43. REMOVE VISOR ASSEMBLY RH (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the visor bracket cover.
Protective Tape
B114303E01
(b) Remove the visor shaft from the visor holder. (c) Disengage the 2 springs and remove the visor. 44. REMOVE VISOR ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114304
60 to 120
IR
B114305E01
45. REMOVE VISOR HOLDER RH (a) Disengage the 2 claws by turning the visor counterclockwise between 60 to 120 and remove the visor holder. HINT: The claw may be damaged during removal. However, it is reusable because this does not effect its function. 46. REMOVE VISOR HOLDER LH HINT: Use the same procedure as for the RH side.
IR57
47. REMOVE ROOM LIGHT ASSEMBLY (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.
Protective Tape
B114306E01
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the 2 covers.
Protective Tape
B124365E01
(c) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws.
Protective Tape
B114307E01
(d) Remove the No. 1 roof wire from the claw of the room light. (e) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base and the room light.
IR
Protective Tape
B114308E01
IR58
48. REMOVE MAP LIGHT ASSEMBLY (a) Using a roof moulding remover, disengage the 4 claws.
Moulding Remover
B114309E01
(b) Disconnect the map light connector and remove the map light.
B114310
Special Clip
49. REMOVE FRONT PILLAR GARNISH RH (a) w/ Curtain Shield Airbag: NOTICE: Install a protective cover onto the curtain shield airbag as soon as the front pillar garnish is removed. Replace the special clip with a new one when the front pillar garnish is removed. (1) Disengage the 2 clips and the 2 claws and remove the front pillar garnish.
IR
B117693E01
B117694
IR59
(c) Disconnect the connector. (d) Using a clip remover, remove the 3 antenna cord clamps.
B114312
(e) w/ Curtain Shield Airbag: (1) Completely cover the curtain shield airbag with a piece of cloth or nylon and fix the ends of the fabric with adhesive tape, as shown in the illustration. Protective cover size:
Protective Cover
Adhesive Tape
B114313E01
Special Clip
50. REMOVE FRONT PILLAR GARNISH LH (a) w/ Curtain Shield Airbag: NOTICE: Install a protective cover onto the curtain shield airbag as soon as the front pillar garnish is removed. Replace the special clip with a new one when the front pillar garnish is removed. (1) Disengage the 2 clips and the 2 claws and remove the front pillar garnish.
IR
B117695E01
IR60
B117696
(c) Using a clip remover, remove the 4 wiring harness clamps.
B114316
b a
(d) w/ Curtain Shield Airbag: (1) Completely cover the curtain shield airbag with a piece of cloth or nylon and fix the ends of the fabric with adhesive tape, as shown in the illustration. Protective cover size:
Protective Cover
51. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See page ME-145)
Adhesive Tape
B114317E01
52. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See page ME-145) 53. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See page ME-145) 54. REMOVE COMBINATION METER ASSEMBLY (See page ME-146) 55. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-20) 56. REMOVE NO. 1 SWITCH HOLE BASE (See page IP20) 57. REMOVE UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-21) 58. REMOVE INSTRUMENT PANEL BOX (See page IP-70)
IR
IR61
59. REMOVE ROOF HEADLINING ASSEMBLY (a) Using a screwdriver, remove the wiring harness clamp. (b) Disconnect the connector.
B114511
(c) Remove the antenna cord from the antenna cord clamp. (d) Disconnect the 2 connectors. (e) Using a clip remover, remove the 2 connectors. (f) w/ Curtain Shield Airbag: (1) Using a clip remover, remove the clip. (2) Disengage the 4 hooks.
B114321
B114324
(g) w/o Curtain Shield Airbag: (1) Using a clip remover, remove the clip.
IR
IR62
(2) Disengage the 2 claws and 4 hooks.
B114322
(h) Remove the roof headlining from the back door.
B114323
60. REMOVE NO. 5 ROOF SILENCER PAD HINT: Only remove the No. 5 roof silencer pad when the No. 1 roof wire and roof headlining are replaced. (a) Remove the 2 No. 5 roof silencer pads. 61. REMOVE NO. 1 ROOF SILENCER PAD HINT: Only remove the No. 1 roof silencer pad when the No. 1 roof wire and roof headlining are replaced.
B127675
IR
IR63
(a) Remove the 4 No. 1 roof silencer pads.
B114338
62. REMOVE REAR ROOF SILENCER PAD HINT: Only remove the rear roof silencer pad when the roof headlining is replaced. (a) Remove the 2 rear roof silencer pads.
B114580
Tape
63. REMOVE NO. 1 ROOF WIRE HINT: Only remove the No. 1 roof wire when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 7 pieces of tape. (2) Remove the No. 1 roof wire from the claw of the side rail spacer.
B114326E01
IR
(b) w/o Curtain Shield Airbag: (1) Remove the 6 pieces of tape. (2) Remove the No. 1 roof wire from the 2 claws of the side rail spacer. 64. REMOVE ANTENNA CORD SUB-ASSEMBLY HINT: Only remove the antenna cord when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 6 pieces of tape. (2) Remove the antenna cord from the cutout of the roof headlining.
Tape
B114327E01
IR64
(3) Remove the antenna cord from the 3 claws of the side rail spacer.
Tape
Cutout
B114328E01
(b) w/o Curtain Shield Airbag: (1) Remove the 4 pieces of tape. (2) Remove the antenna cord from the cutout of the roof headlining. (3) Remove the antenna cord from the 5 claws of the side rail spacer.
Tape
Cutout
B114329E01
Adhesive
65. REMOVE FRONT SIDE RAIL SPACER RH HINT: Only remove the front side rail spacer when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 3 adhesion portions and the front side rail spacer.
IR
B114330E01
(b) w/o Curtain Shield Airbag: (1) Remove the 4 adhesion portions and the front side rail spacer.
Adhesive
66. REMOVE FRONT SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
B114331E01
IR65
67. REMOVE REAR SIDE RAIL SPACER RH HINT: Only remove the rear side rail spacer when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 2 adhesion portions and the rear side rail spacer.
Adhesive
B114332E01
(b) w/o Curtain Shield Airbag: (1) Remove the 4 adhesion portions and the rear side rail spacer. 68. REMOVE REAR SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
Adhesive
B114333E01
IR
IR66
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when installing the rear seat. 1. INSTALL REAR SIDE RAIL SPACER RH (a) w/ Curtain Shield Airbag: (1) Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
Adhesive
B114332E01
(b) w/o Curtain Shield Airbag: (1) Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining. 2.
Adhesive
INSTALL REAR SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
B114333E01
3.
INSTALL FRONT SIDE RAIL SPACER RH (a) w/ Curtain Shield Airbag: (1) Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
Adhesive
IR
B114330E01
(b) w/o Curtain Shield Airbag: (1) Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
Adhesive
4.
INSTALL FRONT SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side. INSTALL ANTENNA CORD SUB-ASSEMBLY (a) w/ Curtain Shield Airbag: (1) Install the part of the antenna cord marked with red positioning tape into claw A of the front side rail spacer.
5.
B114331E01
IR67
(2) Install the antenna cord positioning tapes into the 2 claws of the front and rear side rail spacers. (3) Insert the antenna cord positioning tape into the cutout of the roof headlining. (4) Align the antenna cord positioning tapes with the markings of the roof headlining. (5) Install the antenna cord onto the roof headlining with 6 new pieces of tape.
A Tape
Cutout
b Positioning Tape Marking a

B114334E02
Tape size:
Mark a b Measurement 80 mm (3.15 in.) 20 mm (0.787 in.)
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. (b) w/o Curtain Shield Airbag: (1) Install the part of the antenna cord marked with red positioning tape into claw A of the front side rail spacer. (2) Install the antenna cord positioning tapes into the 4 claws of the front and rear side rail spacers. (3) Insert the antenna cord positioning tape into the cutout of the roof headlining. (4) Align the antenna cord positioning tapes with the markings of the roof headlining.
IR
IR68
(5) Install the antenna cord onto the roof headlining with 4 new pieces of tape.
A Tape
Cutout
b Positioning Tape Marking

B114335E02
Tape size:
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. 6. INSTALL NO. 1 ROOF WIRE (a) w/ Curtain Shield Airbag: (1) Install the part of the No. 1 roof wire marked with red positioning tape into claw A of the front side rail spacer. (2) Align the No. 1 roof wire positioning tapes with the markings of the roof headlining.
IR
IR69
(3) Install the No. 1 roof wire onto the roof headlining with 7 new pieces of tape. Tape size:
A b a
Tape
Positioning Tape Marking

B114336E02
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. (b) w/o Curtain Shield Airbag: (1) Install the part of the No. 1 roof wire marked with red positioning tape into claw A of the front side rail spacer. (2) Install the No. 1 roof wire positioning tape into the claw of the front side rail spacer. (3) Align the No. 1 roof wire positioning tapes with the markings of the roof headlining.
(4) Install the No. 1 roof wire onto the roof headlining with 6 new pieces of tape. Tape size:
Tape
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
b a
IR
Marking
B114337E02
Positioning Tape
7.
INSTALL REAR ROOF SILENCER PAD (a) Align 2 new rear roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
B114581E01
IR70
8.
INSTALL NO. 1 ROOF SILENCER PAD (a) Align 4 new No. 1 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
B114579E01
9.
INSTALL NO. 5 ROOF SILENCER PAD (a) Align 2 new No. 5 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
B127676E01
IR
B114340
10. INSTALL ROOF HEADLINING ASSEMBLY (a) Pull the roof headlining back into the vehicle through the back door. (b) w/ Curtain Shield Airbag: (1) Engage the 4 hooks and install the roof headlining.
IR71
(2) Install the clip.
B114324
(c) w/o Curtain Shield Airbag: (1) Engage the 2 claws and the 4 hooks and install the roof headlining. (2) Install the clip.
B114322
(d) Install the 2 connectors. (e) Connect the 2 connectors. (f) Install the antenna cord onto the antenna cord clamp.
IR
B114321
IR72
(g) Connect the connector. (h) Install the wiring harness clamp. 11. INSTALL INSTRUMENT PANEL BOX (See page IP-78) 12. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-29) 13. INSTALL NO. 1 SWITCH HOLE BASE (See page IP32)
B114511
14. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-32) 15. INSTALL COMBINATION METER ASSEMBLY (See page ME-148) 16. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-148) 17. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-149) 18. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-149) 19. INSTALL FRONT PILLAR GARNISH RH (a) w/ Curtain Shield Airbag: (1) Remove the piece of cloth or nylon.
Piece of cloth or nylon
B114342E01
(b) Install the 3 antenna cord clamps. (c) Connect the connector.
IR
B114312
IR73
Special Clip
(d) w/ Curtain Shield Airbag: (1) Install a new special clip and the clip onto a new front pillar garnish. (2) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B117697E01
(e) w/o Curtain Shield Airbag: (1) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B117694
20. INSTALL FRONT PILLAR GARNISH LH (a) w/ Curtain Shield Airbag: (1) Remove the piece of cloth or nylon.
Piece of cloth or nylon
B114344E01
(b) Install the 4 wiring harness clamps.
IR
B114316
IR74
Special Clip
(c) w/ Curtain Shield Airbag: (1) Install a new special clip and the clip onto a new front pillar garnish. (2) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B117698E01
(d) w/o Curtain Shield Airbag: (1) Engage the 2 clips and the 2 claws and install the front pillar garnish.
B114318
21. INSTALL MAP LIGHT ASSEMBLY (a) Connect the map light connector.
B114310
IR
(b) Engage the 4 claws and install the map light.
B114346
IR75
22. INSTALL ROOM LIGHT ASSEMBLY (a) Engage the 4 claws and install the room light switch base. (b) Install the No. 1 roof wire onto the claw of the room light.
B114347
(c) Engage the 4 claws and install the room light.
B114348
(d) Engage the 4 claws and install the 2 covers.
IR
B124366
(e) Engage the 4 claws and install the room light lens.
B114349
IR76
60 to 120
23. INSTALL VISOR HOLDER RH (a) Engage the 2 claws by turning the visor holder clockwise between 60 to 120 and install the visor holder. 24. INSTALL VISOR HOLDER LH HINT: Use the same procedure as for the RH side.
B114350E01
25. INSTALL VISOR ASSEMBLY RH (a) Engage the 2 springs and install the visor. (b) Install the visor shaft into the visor holder.
B114304
(c) Engage the 4 claws and install the visor bracket cover. 26. INSTALL VISOR ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114351
IR
B114302
27. INSTALL ASSIST GRIP SUB-ASSEMBLY HINT: The fitting number of the assist grips varies with the specifications. (a) Engage the 2 springs and install the assist grip.
28. INSTALL ASSIST GRIP COVER HINT: The fitting number of the assist grip covers varies with the specifications. (a) Engage the 2 claws and install the assist grip cover.
B114352
IR77
29. INSTALL ROOF HEADLINING SERVICE HOLE COVER (w/o Curtain Shield Airbag) HINT: The fitting number of the roof headlining service hole covers varies with the specifications. (a) Install the roof headlining service hole cover. 30. INSTALL SEAT BELT ANCHOR COVER (See page SB-160)
B114353
31. INSTALL CENTER PILLAR UPPER GARNISH RH (a) Engage the 3 clips and the 2 hooks and install the center pillar upper garnish. 32. INSTALL CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side.
B114298
33. INSTALL CENTER PILLAR LOWER GARNISH RH (a) Engage the 2 clips and the 2 claws and install the center pillar lower garnish. 34. INSTALL CENTER PILLAR LOWER GARNISH LH HINT: Use the same procedure as for the RH side.
B114297
35. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (a) Install the shoulder anchor with the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf) 36. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
IR
B114296
B114421
IR78
Special Clip
38. INSTALL ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: (1) Install a new special clip onto the roof side inner garnish. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish. (3) Engage the 5 clips and install the roof side inner garnish.
B114576E01
(b) w/ Curtain Shield Airbag: (1) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish. (2) Engage the 5 clips and install the roof side inner garnish.
B114575
Special Clip
39. INSTALL ROOF SIDE INNER GARNISH LH (a) w/ Curtain Shield Airbag: (1) Install a new special clip onto the roof side inner garnish. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish. (3) Engage the 5 clips and install the roof side inner garnish.
IR
B114578E01
(b) w/ Curtain Shield Airbag: (1) Pass the rear seat outer belt through the slit in the roof side inner garnish. (2) Engage the 5 clips and install the roof side inner garnish.
B114577
IR79
40. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (a) Engage the 4 claws and install the center belt guide.
B114468
(b) Install the through anchor with the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
B114461
(c) Engage the 2 claws and close the slip joint cover.
B114469
(d) Install the 2 tongue plates.
IR
B114459
IR80
41. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (a) Engage the 3 clips and the 6 claws and install the deck trim side panel. (b) Tighten the 3 screws.
B114573
42. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (a) Connect the luggage compartment room light connector. (b) Engage the 3 clips and the 6 claws and install the deck trim side board. (c) Tighten the 3 screws.
IR
B114574
43. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH (a) Engage the clip and install the anchor plate. (b) Tighten the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
B130498
IR81
(c) Install the belt into the rear seat shoulder belt hanger. 44. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114289
Loaction Mark Paint Mark
45. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH (a) Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration. Paint mark:
Area RH side LH side Color Purple Pink
46. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B130370E01
47. INSTALL REAR DOOR SCUFF PLATE RH (a) Engage the 6 claws and install the rear door scuff plate. 48. INSTALL REAR DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
IR
B114287
IR82
Paint Mark
Location Mark
49. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration. Paint mark:
Area RH side LH side Color Gold Silver
B130371E01
51. INSTALL COWL SIDE TRIM BOARD RH (a) Engage the claw and the stud bolt and install the cowl side trim board. 52. INSTALL COWL SIDE TRIM BOARD LH HINT: Use the same procedure as for the RH side.
B114285
53. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (a) Engage the 4 claws and install the instrument panel under cover.
IR
B114571
IR83
54. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (a) Engage the 3 claws and install the instrument panel under cover. (b) Tighten the 2 screws.
B114572
55. INSTALL FRONT DOOR SCUFF PLATE RH (a) Engage the 8 claws and install the front door scuff plate. 56. INSTALL FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side.
B114284
57. INSTALL REAR DECK TRIM COVER (a) Engage the 8 claws and install the rear deck trim cover. (b) Install the 2 clips. 58. INSTALL REAR SEAT ASSEMBLY RH (for 60/40 Split Seat Type) (See page SE-102) 59. INSTALL REAR SEAT ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-84) 60. INSTALL NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (a) for RH Side: (1) Install the No. 1 rear seat leg cover (See page SE-103). (b) for LH Side: (1) Install the No. 1 rear seat leg cover (See page SE-85). 61. INSTALL NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-85)
IR
B117692
IR84
62. INSTALL REAR SEATBACK ASSEMBLY (for Hold Down Seat Type) (See page SE-122) 63. INSTALL REAR SEAT CUSHION COVER PAD SUBASSEMBLY (for Hold Down Seat Type) (See page SE123) 64. INSTALL DECK FLOOR BOX RH (a) Set the deck floor box and lock the 2 knobs. 65. INSTALL DECK FLOOR BOX LH HINT: Use the same procedure as for the RH side.
B106446
66. INSTALL DECK BOARD SUB-ASSEMBLY (a) Set the deck board and lock the 2 knobs.
B106447
67. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (a) Engage the 2 claws and install the package tray trim panel. (b) Install the 5 pieces of hook tape. (c) Install the 2 package tray trim suspenders. 68. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
IR
Hook Tape
B114569E01
69. INSPECT SRS WARNING LIGHT (See page RS-31)
IR84
INTERIOR BODY
ROOF HEADLINING (for Hatchback 3 Door)

COMPONENTS
PACKAGE TRAY TRIM PANEL ASSEMBLY
DECK BOARD SUB-ASSEMBLY
IR
DECK FLOOR BOX RH
DECK FLOOR BOX LH
B114273E01
IR85
REAR SEAT ASSEMBLY RH NO. 1 REAR SEAT LEG COVER
37 (375, 27)
x6
REAR SEAT ASSEMBLY LH
37 (375, 27)
x7
for Hold Down Seat Type:
REAR SEATBACK ASSEMBLY REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
IR
37 (375, 27)
x4

B121713E03
IR86
FRONT DOOR OPENING TRIM WEATHERSTRIP RH
IR
COWL SIDE TRIM BOARD RH
FRONT DOOR SCUFF PLATE RH
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY RH
Non-reusable part
B114488E02
IR87
FRONT PILLAR GARNISH LH x2 FRONT DOOR OPENING TRIM WEATHERSTRIP LH
IR
INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH
FRONT DOOR SCUFF PLATE LH COWL SIDE TRIM BOARD LH
Non-reusable part
B114489E02
IR88
REAR ROOF SIDE RAIL GARNISH RH
ROOF SIDE INNER GARNISH RH
REAR CENTER SEAT OUTER BELT ASSEMBLY CENTER PILLAR UPPER GARNISH RH
42 (430, 31)
DECK TRIM SIDE PANEL ASSEMBLY RH x2
42 (430, 31)
x2 FRONT QUARTER TRIM PANEL ASSEMBLY RH REAR SEAT OUTER BELT ASSEMBLY RH REAR DECK TRIM COVER
IR
42 (430, 31)

B117699E06
IR89
42 (430, 31)
FRONT SEAT OUTER BELT ASSEMBLY LH
REAR ROOF SIDE RAIL GARNISH LH ROOF SIDE INNER GARNISH LH
DECK TRIM SIDE PANEL ASSEMBLY LH CENTER PILLAR UPPER GARNISH LH x2
FRONT QUARTER TRIM PANEL ASSEMBLY LH
LUGGAGE COMPARTMENT ROOM LIGHT CONNECTOR
IR
42 (430, 31)

B117700E07
IR90
INSTRUMENT CLUSTER FINISH PANEL x2 COMBINATION METER ASSEMBLY x2
x2
x2
20 (204, 15)
NO. 1 SWITCH HOLE BASE
IR
INSTRUMENT PANEL FINISH PANEL END RH
INSTRUMENT PANEL FINISH PANEL END LH

B117770E02
IR91
x4
ASSIST GRIP COVER x8
ROOM LIGHT ASSEMBLY
IR
MAP LIGHT ASSEMBLY
VISOR ASSEMBLY RH
B114490E05
IR92
w/o Curtain Shield Airbag:
x6 ROOF HEADLINING SERVICE HOLE COVER
x2
ASSIST GRIP COVER
ROOM LIGHT ASSEMBLY
IR
VISOR ASSEMBLY RH MAP LIGHT ASSEMBLY
B114491E03
IR93
NO. 4 ROOF HEADLINING PAD RH
NO. 5 ROOF HEADLINING PAD LH
NO. 2 ROOF HEADLINING PAD LH NO. 1 ROOF SILENCER PAD x4
REAR ROOF SILENCER PAD x2 x2
IR
Non-reusable part
B114547E01
IR94
ANTENNA CORD SUB-ASSEMBLY x6
x7 NO. 1 ROOF WIRE
IR
FRONT SIDE RAIL SPACER RH REAR SIDE RAIL SPACER LH

B114492E02
IR95
w/o Curtain Shield Airbag: ANTENNA CORD SUB-ASSEMBLY x4
x6 NO. 1 ROOF WIRE
x4
x2
REAR ROOF SILENCER PAD x2
IR
FRONT SIDE RAIL SPACER RH
REAR SIDE RAIL SPACER LH

B114548E02
IR96
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when removing the rear seat. 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (See page IR-48) REMOVE DECK BOARD SUB-ASSEMBLY (See page IR-48) REMOVE DECK FLOOR BOX RH (See page IR-48) REMOVE DECK FLOOR BOX LH (See page IR-48) REMOVE NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (a) for RH Side: (1) Remove the No. 1 rear seat leg cover (See page SE-89). (b) for LH Side: (1) Remove the No. 1 rear seat leg cover (See page SE-70). REMOVE NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-70) REMOVE REAR SEAT ASSEMBLY RH (for 60/40 Split Seat Type) (See page SE-89) REMOVE REAR SEAT ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-71)
2. 3. 4. 5. 6.
7. 8. 9.
IR
10. REMOVE REAR SEAT CUSHION COVER PAD SUBASSEMBLY (for Hold Down Seat Type) (See page SE114) 11. REMOVE REAR SEATBACK ASSEMBLY (for Hold Down Seat Type) (See page SE-115)
IR97
12. REMOVE FRONT DOOR SCUFF PLATE RH (a) Disengage the 8 claws and remove the front door scuff plate. 13. REMOVE FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side. 14. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-50) 15. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-50) 16. REMOVE COWL SIDE TRIM BOARD RH (See page IR-50)
B114494
17. REMOVE COWL SIDE TRIM BOARD LH (See page IR50) 18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Remove the front door opening trim weatherstrip. 19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH HINT: Use the same procedure as for the RH side.
B138507
20. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH (a) Remove the belt of the rear seat outer belt from the rear seat shoulder belt hanger.
B114498
IR
(b) Disengage the 8 clips, the retainer and the 10 claws and remove the front quarter trim panel. 21. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH HINT: Use the same procedure as for the RH side. 22. REMOVE REAR DECK TRIM COVER (See page IR-49)
B114499
IR98
23. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH (a) Remove the bolt. (b) Disengage the clip and remove the anchor plate. 24. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114500
25. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (a) Remove the 3 screws. (b) Disengage the 3 clips and the 3 claws and remove the deck trim side panel.
B114501
26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (a) Remove the 3 screws. (b) Disengage the 3 clips and 3 claws. (c) Disconnect the deck side room light connector and remove the deck trim side panel.
IR
B114502
IR99
27. REMOVE SEAT BELT ANCHOR COVER CAP HINT: Use the same procedure for both sides. (a) Disengage the 3 claws and remove the seat belt anchor cover cap.
B114478
B114479
30. REMOVE CENTER PILLAR UPPER GARNISH RH (a) Disengage the 2 clips and remove the center pillar upper garnish. 31. REMOVE CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side. 32. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (See page IR-52)
B114503
Special Clip
33. REMOVE ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: NOTICE: Replace the special clip with a new one when the roof side inner garnish is removed. (1) Disengage the 4 clips and the claw. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
IR
B114504E01
IR100
(b) w/o Curtain Shield Airbag: (1) Disengage the 4 clips and the claw. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
B114505
Special Clip
34. REMOVE ROOF SIDE INNER GARNISH LH (a) w/ Curtain Shield Airbag: NOTICE: Replace the special clip with a new one when the roof side inner garnish is removed. (1) Disengage the 4 clips and the claw. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
B114506E01
(b) w/o Curtain Shield Airbag: (1) Disengage the 4 clips and the claw. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
B114507
IR
35. REMOVE REAR ROOF SIDE RAIL GARNISH RH (a) Disengage the 4 clips and remove the rear roof side rail garnish. 36. REMOVE REAR ROOF SIDE RAIL GARNISH LH HINT: Use the same procedure as for the RH side. 37. REMOVE SEAT BELT ANCHOR COVER (See page SB-159)
B114508
38. REMOVE ROOF HEADLINING SERVICE HOLE COVER (w/o Curtain Shield Airbag) (See page IR-55) 39. REMOVE ASSIST GRIP COVER (See page IR-55) 40. REMOVE ASSIST GRIP SUB-ASSEMBLY (See page IR-56)
IR101
41. REMOVE VISOR ASSEMBLY RH (See page IR-56) 42. REMOVE VISOR ASSEMBLY LH (See page IR-56) 43. REMOVE VISOR HOLDER RH (See page IR-56) 44. REMOVE VISOR HOLDER LH (See page IR-56) 45. REMOVE ROOM LIGHT ASSEMBLY (See page IR-57) 46. REMOVE MAP LIGHT ASSEMBLY (See page IR-58) 47. REMOVE FRONT PILLAR GARNISH RH (See page IR58) 48. REMOVE FRONT PILLAR GARNISH LH (See page IR59) 49. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See page ME-145) 50. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See page ME-145) 51. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See page ME-145) 52. REMOVE COMBINATION METER ASSEMBLY (See page ME-146) 53. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-20) 54. REMOVE NO. 1 SWITCH HOLE BASE (See page IP20) 55. REMOVE UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-21) 56. REMOVE INSTRUMENT PANEL BOX (See page IP-70) 57. REMOVE ROOF HEADLINING ASSEMBLY (a) Using a screwdriver, remove the wiring harness clamp. (b) Disconnect the connector.
IR
B114511
(c) Remove the antenna cord from the antenna cord clamp. (d) Disconnect the 2 connectors. (e) Using a clip remover, remove the 2 connectors. (f) w/ Curtain Shield Airbag: (1) Using a clip remover, remove the clip.
B114321
IR102
(2) Disengage the 4 hooks.
B114513
(g) w/o Curtain Shield Airbag: (1) Using a clip remover, remove the clip. (2) Disengage the 2 claws and the 4 hooks.
B114514
IR
(h) Remove the roof headlining from the back door.
B114515
IR103
58. REMOVE NO. 5 ROOF SILENCER PAD HINT: Only remove the No. 5 roof silencer pad when the No. 1 roof wire and the roof headlining are replaced. (a) Remove the 2 No. 5 roof silencer pads. 59. REMOVE NO. 1 ROOF SILENCER PAD HINT: Only remove the No. 1 roof silencer pad when the No. 1 roof wire and the roof headlining are replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 4 No. 1 roof silencer pads.
B127719
B114516
(b) w/o Curtain Shield Airbag: (1) Remove the 4 No. 1 roof silencer pads.
IR
B114517
IR104
60. REMOVE REAR ROOF SILENCER PAD HINT: Only remove the rear roof silencer pad when the roof headlining is replaced. (a) Remove the 2 rear roof silencer pads.
B114518
61. REMOVE NO. 2 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) HINT: Only remove the No. 2 roof headlining pad when the roof headlining is replaced. (a) Remove the No. 2 roof headlining pad. 62. REMOVE NO. 2 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side. 63. REMOVE NO. 3 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) HINT: Only remove the No. 3 roof headlining pad when the roof headlining is replaced. (a) Remove the No. 3 roof headlining pad. 64. REMOVE NO. 3 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side. 65. REMOVE NO. 4 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) HINT: Only remove the No. 4 roof headlining pad when the roof headlining is replaced. (a) Remove the No. 4 roof headlining pad. 66. REMOVE NO. 4 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side. 67. REMOVE NO. 1 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) HINT: Only remove the No. 1 roof headlining pad when the roof headlining is replaced. (a) Remove the No. 1 roof headlining pad. 68. REMOVE NO. 1 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side.
B114521
B114522
IR
B114523
B114531
IR105
69. REMOVE NO. 5 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) HINT: Only remove the No. 5 roof headlining pad when the roof headlining is replaced. (a) Remove the No. 5 roof headlining pad. 70. REMOVE NO. 5 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side. 71. REMOVE NO. 1 ROOF WIRE HINT: Only remove the No. 1 roof wire when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 7 pieces of tape. (2) Remove the No. 1 roof wire from the claw of the side rail spacer. (b) w/o Curtain Shield Airbag: (1) Remove the 6 pieces of tape. (2) Remove the No. 1 roof wire from the 2 claws of the side rail spacer. 72. REMOVE ANTENNA CORD SUB-ASSEMBLY HINT: Only remove the antenna cord when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 6 pieces of tape. (2) Remove the antenna cord from the cutout of the roof headlining. (3) Remove the antenna cord from the 3 claws of the side rail spacer.
B114524
Tape
B127681E01
Tape
B127682E01
IR
Tape Cutout
B127683E01
(b) w/o Curtain Shield Airbag: (1) Remove the 5 pieces of tape. (2) Remove the antenna cord from the cutout of the roof headlining.
IR106
(3) Remove the antenna cord from the 5 claws of the side rail spacer.
Tape Cutout
B127684E01
Adhesive
73. REMOVE FRONT SIDE RAIL SPACER RH HINT: Only remove the front side rail spacer when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 3 adhesion portions and the front side rail spacer.
B127685E01
(b) w/o Curtain Shield Airbag: (1) Remove the 4 adhesion portions and the front side rail spacer. 74. REMOVE FRONT SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
Adhesive
B127686E01
IR
Adhesive
75. REMOVE REAR SIDE RAIL SPACER RH HINT: Only remove the rear side rail spacer when the roof headlining is replaced. (a) w/ Curtain Shield Airbag: (1) Remove the 2 adhesion portions and the rear side rail spacer.
B127687E01
IR107
(b) w/o Curtain Shield Airbag: (1) Remove the 4 adhesion portions and the rear side rail spacer. 76. REMOVE REAR SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
Adhesive
B127688E01
IR
IR108
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page RS-1). NOTICE: Always use "Torx" socket wrench E10 when installing the rear seat. 1. INSTALL REAR SIDE RAIL SPACER RH (a) w/ Curtain Shield Airbag: (1) Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
Adhesive
B114529E01
(b) w/o Curtain Shield Airbag (1) Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining. 2. INSTALL REAR SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side.
Adhesive
B114530E01
3.
INSTALL FRONT SIDE RAIL SPACER RH (a) w/ Curtain Shield Airbag: (1) Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
Adhesive
IR
B114527E01
(b) w/o Curtain Shield Airbag (1) Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining. 4. INSTALL FRONT SIDE RAIL SPACER LH HINT: Use the same procedure as for the RH side. INSTALL ANTENNA CORD SUB-ASSEMBLY (a) w/ Curtain Shield Airbag: (1) Install the part of the antenna cord marked with red positioning tape into claw A of the front side rail spacer.
Adhesive
B114528E01
5.
IR109
(2) Install the antenna cord positioning tapes into the 2 claws of the front and rear side rail spacers. (3) Insert the antenna cord positioning tape into the cutout of the roof headlining. (4) Align the antenna cord positioning tapes with the markings of the roof headlining. (5) Install the antenna cord onto the roof headlining with 6 new pieces of tape.
Tape
Cutout b Positioning Tape Marking

B127690E02
Tape size:
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. (b) w/o Curtain Shield Airbag: (1) Install the part of the antenna cord marked with red positioning tape into claw A of the front side rail spacer. (2) Install the antenna cord positioning tapes into the 4 claws of the front and rear side rail spacers. (3) Insert the antenna cord positioning tape into the cutout of the roof headlining. (4) Align the antenna cord positioning tapes with the markings of the roof headlining.
IR
IR110
(5) Install the antenna cord onto the roof headlining with 5 new pieces of tape.
A Tape Cutout b a Marking

B127691E02
Positioning Tape
Tape size:
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. 6. INSTALL NO. 1 ROOF WIRE (a) w/ Curtain Shield Airbag: (1) Install the part of the No. 1 roof wire cord marked with red positioning tape into claw A of the front side rail spacer. (2) Align the No. 1 roof wire positioning tapes with the markings of the roof headlining. (3) Install the No. 1 roof wire onto the roof headlining with 8 new pieces of tape. Tape size:
IR
A b a Positioning Tape
Tape
Marking
B127692E02
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure. (b) w/o Curtain Shield Airbag: (1) Install the part of the No. 1 roof wire cord marked with red positioning tape into claw A of the front side rail spacer. (2) Install the No. 1 roof wire positioning tape into the claw of the front rear side rail spacers.
IR111
(3) Align the No. 1 roof wire positioning tapes with the markings of the roof headlining. (4) Install the No. 1 roof wire onto the roof headlining with 7 new pieces of tape. Tape size:
A b a Positioning Tape
Tape
NOTICE: Apply the tape securely in place. Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
Marking
B127693E02
7.
INSTALL NO. 5 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) (a) Align a new No. 5 roof headlining pad with the markings of the roof headlining and install it onto the roof headlining. INSTALL NO. 5 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side. INSTALL NO. 1 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) (a) Align a new No. 1 roof headlining pad with the marking of the roof headlining and install it onto the roof headlining.
8.
Marking
B114535E01
9.
IR
Marking
10. INSTALL NO. 1 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side.
B114532E01
IR112
11. INSTALL NO. 4 ROOF HEADLINING PAD RH (w/ Curtain Shield Airbag) (a) Align a new No. 4 roof headlining pad with the markings of the roof headlining and install it onto the roof headlining. 12. INSTALL NO. 4 ROOF HEADLINING PAD LH (w/ Curtain Shield Airbag) HINT: Use the same procedure as for the RH side.
B114536E01
Marking
B114537E01
Marking
B114538E01
Marking
IR
Marking
B114541E01
17. INSTALL REAR ROOF SILENCER PAD (w/ Curtain Shield Airbag) (a) Align 2 new rear roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
IR113
18. INSTALL NO. 1 ROOF SILENCER PAD (a) w/ Curtain Shield Airbag: (1) Align 4 new No. 1 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
B114542E01
(b) w/o Curtain Shield Airbag: (1) Align 4 new No. 1 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
IR
B114543E01
19. INSTALL NO. 5 ROOF SILENCER PAD (a) Align 2 new No. 5 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
Marking
B127720E01
IR114
20. INSTALL ROOF HEADLINING ASSEMBLY (a) Pull the roof headlining back into the vehicle through the back door. (b) w/ Curtain Shield Airbag: (1) Engage the 4 hooks and install the roof headlining. (2) Install the clip.
B114544
B114513
(c) w/o Curtain Shield Airbag: (1) Engage the 2 claws and the 4 hooks and install the roof headlining. (2) Install the clip.
IR
B114514
IR115
(d) Install the 2 connectors. (e) Connect the 2 connectors. (f) Install the antenna cord onto the antenna cord clamp.
B114512
(g) Connect the connector. (h) Install the wiring harness clamp. 21. INSTALL INSTRUMENT PANEL BOX (See page IP-78) 22. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-29) 23. INSTALL NO. 1 SWITCH HOLE BASE (See page IP32)
B114511
24. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-32) 25. INSTALL COMBINATION METER ASSEMBLY (See page ME-148) 26. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-148) 27. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-149) 28. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-149) 29. INSTALL FRONT PILLAR GARNISH RH (See page IR71) 30. INSTALL FRONT PILLAR GARNISH LH (See page IR72) 31. INSTALL MAP LIGHT ASSEMBLY (See page IR-73) 32. INSTALL ROOM LIGHT ASSEMBLY (See page IR-74) 33. INSTALL VISOR HOLDER RH (See page IR-75) 34. INSTALL VISOR HOLDER LH (See page IR-75) 35. INSTALL VISOR ASSEMBLY RH (See page IR-75) 36. INSTALL VISOR ASSEMBLY LH (See page IR-75) 37. INSTALL ASSIST GRIP SUB-ASSEMBLY (See page IR-75) 38. INSTALL ASSIST GRIP COVER (See page IR-75) 39. INSTALL ROOF HEADLINING SERVICE HOLE COVER (w/o Curtain Shield Airbag) (See page IR-76) 40. INSTALL SEAT BELT ANCHOR COVER (See page SB-160)
IR
IR116
41. INSTALL REAR ROOF SIDE RAIL GARNISH RH (a) Engage the 4 clips and install the rear roof side rail garnish. 42. INSTALL REAR ROOF SIDE RAIL GARNISH LH HINT: Use the same procedure as for the RH side.
B114508
Special Clip
43. INSTALL ROOF SIDE INNER GARNISH RH (a) w/ Curtain Shield Airbag: (1) Install a new special clip onto the roof side inner garnish. (2) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish. (3) Engage the 4 clips and the claw and install the roof side inner garnish.
B114504E01
(b) w/o Curtain Shield Airbag: (1) Pass the rear seat outer belt and the rear center seat outer belt through the slit in the roof side inner garnish. (2) Engage the 4 clips and the claw and install the roof side inner garnish.
B114505
IR
Special Clip
44. INSTALL ROOF SIDE INNER GARNISH LH (a) w/ Curtain Shield Airbag: (1) Install a new special clip onto the roof side inner garnish. (2) Pass the rear seat outer belt through the slit in the roof side inner garnish. (3) Engage the 4 clips and the claw and install the roof side inner garnish.
B114506E01
IR117
(b) w/o Curtain Shield Airbag: (1) Pass the rear seat outer belt through the slit in the roof side inner garnish. (2) Engage the 4 clips and the claw and install the roof side inner garnish. 45. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (See page IR-78)
B114507
46. INSTALL CENTER PILLAR UPPER GARNISH RH (a) Engage the 2 clips and install the center pillar upper garnish. 47. INSTALL CENTER PILLAR UPPER GARNISH LH HINT: Use the same procedure as for the RH side.
B114503
48. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (a) Install the through anchor with the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf) 49. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114479
IR
B114478
IR118
51. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (a) Engage the 3 clips and the 3 claws and install the deck trim side panel. (b) Tighten the 3 screws.
B114501
52. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (a) Connect the deck side room light connector. (b) Engage the 3 clips and the 3 claws and install the deck trim side panel. (c) Tighten the 3 screws.
IR
B114502
53. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH (a) Engage the clip and install the anchor plate. (b) Tighten the bolt. Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf) 54. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH HINT: Use the same procedure as for the RH side. 55. INSTALL REAR DECK TRIM COVER (See page IR-82)
B114500
IR119
56. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH (a) Engage the 8 clips, the retainer and the 10 claws and install the front quarter trim panel.
B114499
(b) Install the belt of the rear seat outer belt onto the rear seat shoulder belt hanger. 57. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH HINT: Use the same procedure as for the RH side.
B114498
Locating Mark
58. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (a) Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration. Paint mark:
Area RH side LH side Color Yellow White
Paint Mark
B114546E01
IR
60. INSTALL COWL SIDE TRIM BOARD RH (See page IR81) 61. INSTALL COWL SIDE TRIM BOARD LH (See page IR81) 62. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-81) 63. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-82)
IR120
64. INSTALL FRONT DOOR SCUFF PLATE RH (a) Engage the 8 claws and install the front door scuff plate. 65. INSTALL FRONT DOOR SCUFF PLATE LH HINT: Use the same procedure as for the RH side. 66. INSTALL REAR SEAT ASSEMBLY RH (for 60/40 Split Seat Type) (See page SE-102) 67. INSTALL REAR SEAT ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-84) 68. INSTALL NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (a) for RH Side: (1) Install the No. 1 rear seat leg cover (See page SE-103). (b) for LH Side: (1) Install the No. 1 rear seat leg cover (See page SE-85). 69. INSTALL NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-85) 70. INSTALL REAR SEATBACK ASSEMBLY (for Hold Down Seat Type) (See page SE-122) 71. INSTALL REAR SEAT CUSHION COVER PAD SUBASSEMBLY (for Hold Down Seat Type) (See page SE123) 72. INSTALL DECK FLOOR BOX RH (See page IR-83) 73. INSTALL DECK FLOOR BOX LH (See page IR-83) 74. INSTALL DECK BOARD SUB-ASSEMBLY (See page IR-83) 75. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (See page IR-83)
B114494
IR
76. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 77. INSPECT SRS WARNING LIGHT (See page RS-31)

Vios Interior

Uploaded by

Copyright:

Available Formats

Vios Interior

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Vios Interior

Uploaded by

Copyright:

Available Formats

INTERIOR ROOF HEADLINING (for Sedan)

ROOF HEADLINING (for Sedan)

FRONT SEAT HEADREST ASSEMBLY

FRONT SEAT ASSEMBLY LH

BUCKLE SWITCH CONNECTOR

for Front Seat Side Airbag: BUCKLE SWITCH CONNECTOR

N*m (kgf*cm, ft*lbf) : Specified torque

INTERIOR ROOF HEADLINING (for Sedan)

FRONT SEAT HEADREST ASSEMBLY

x4 OCCUPANT CLASSIFICATION ECU CONNECTOR

BUCKLE SWITCH CONNECTOR

FRONT SEAT ASSEMBLY RH

for Front Seat Side Airbag:

BUCKLE SWITCH CONNECTOR

OCCUPANT CLASSIFICATION ECU CONNECTOR

N*m (kgf*cm, ft*lbf) : Specified torque

INTERIOR ROOF HEADLINING (for Sedan)

for 60/40 Split Seat Type:

REAR SEAT OUTER BELT ASSEMBLY

REAR CENTER SEAT OUTER BELT ASSEMBLY

REAR SEATBACK ASSEMBLY RH

REAR SEAT OUTER BELT ASSEMBLY

REAR SEATBACK ASSEMBLY LH

REAR SEAT INNER BELT ASSEMBLY RH

REAR SEAT INNER BELT ASSEMBLY LH

REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY

N*m (kgf*cm, ft*lbf) : Specified torque

INTERIOR ROOF HEADLINING (for Sedan)

for Fixed Seat Type:

REAR SEAT OUTER BELT ASSEMBLY RH

REAR CENTER SEAT OUTER BELT ASSEMBLY

REAR SEAT OUTER BELT ASSEMBLY LH

7.9 (80, 70 in.*lbf)

x3 REAR SEATBACK ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY RH

REAR SEAT INNER BELT ASSEMBLY LH

REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY

N*m (kgf*cm, ft*lbf) : Specified torque

INTERIOR ROOF HEADLINING (for Sedan)

for 60/40 Split Seat Type:

LUGGAGE COMPARTMENT FLOOR MAT

SPARE WHEEL COVER ASSEMBLY

LUGGAGE COMPARTMENT TRIM INNER PAD

LUGGAGE COMPARTMENT TRIM INNER PAD

INTERIOR ROOF HEADLINING (for Sedan)

w/ Curtain Shield Airbag:

x2 CENTER PILLAR UPPER GARNISH RH

FRONT SEAT OUTER BELT ASSEMBLY RH

FRONT PILLAR GARNISH RH

FRONT DOOR OPENING TRIM WEATHERSTRIP RH

SEAT BELT ANCHOR COVER CAP

CENTER PILLAR LOWER GARNISH RH FRONT DOOR SCUFF PLATE RH

COWL SIDE TRIM BOARD RH

INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY RH

N*m (kgf*cm, ft*lbf) : Specified torque Non-reusable part

INTERIOR ROOF HEADLINING (for Sedan)

w/ Curtain Shield Airbag:

x2 SEAT BELT ANCHOR COVER CAP

CENTER PILLAR UPPER GARNISH LH FRONT SEAT OUTER BELT ASSEMBLY LH

FRONT PILLAR GARNISH LH

Nm (kgfcm, ft*lbf) : Specified torque

Nm (kgfcm, ft*lbf) : Specified torque

Nm (kgfcm, ft*lbf) : Specified torque

Nm (kgfcm, ft*lbf) : Specified torque

Nm (kgfcm, ft*lbf) : Specified torque Non-reusable part

Nm (kgfcm, ft*lbf) : Specified torque Non-reusable part

Nm (kgfcm, ft*lbf) : Specified torque